Job Description:

• Perform preventive maintenance of production equipment.
• To report in writing for maintenance carry out.
• Provide support for network, security, server, UPS and mission critical systems.
• Perform other job responsibilities as and when assigned.

Requirements:

• Minimally 1-2 years of experience in supporting network, security, server, UPS and mission critical systems with a stringent SLA of 99.9%.
• Customer orientated with high level of service attitude.
• Good listening and analytical skills.
• Hardworking, outgoing and enthusiastic.
• Positive working attitude.
• Team player and also able to work independently with little supervision.
• Able to thrive in a dynamic environment.
• Able to understand the system and architecture diagrams.
• Able to understand the user operation environment.
• Willingness to pick up new technologies.
• Flexible to work in rotational shifts.

Interested candidates, do send your resume to [email protected]. ONLY shortlisted candidates will be notified through email for an interview.

Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

• Minimum 8 years of engineering experience with recognised Degree in relevant field
• At least 5 years of supervision experience of E&M work in the construction site for projects of similar scale, complexity and nature of work
• Candidate must have LTA/ MRT/ rail projects background

About the Company:

The company started with civil engineering contracts and progressively expanded into addition and alteration, demolition, civil engineering, and general building works.

Job Responsibilities:

• Assist the Project Manager in overseeing the complete lifecycle of projects, including planning, coordination, execution, and control.
• Assist in building and guiding project teams, providing direction, and support to achieve project goals.
• Assign tasks and responsibilities to team members, ensuring effective resource allocation.
• Develop and maintain project timelines and regularly monitor progress.
• Assist in generating reports that outline project status, issues, and proposed solutions.
• Address conflicts and resolve issues within the project team.
• Analyze and troubleshoot problem areas, adjusting strategies as required.
• Mentor and motivate team members, fostering a positive and accountable work environment.
• Undertake additional tasks and assignments as they arise.

Job Requirements:

• Hold a Diploma/Degree in Civil Engineering.
• Possess a minimum of 2 years of experience in the civil engineering industry.
• Exhibit strong communication skills.
• Have relevant on-site experience.
• Possess excellent problem-solving abilities.
• Can work effectively under pressure and take initiative.

How to Apply:
Interested candidates, please submit your updated resume by using Quick Apply button
We regret to inform that only shortlisted candidates will be informed.

Yip Seow Thung
Registration Number: R24121304
EA License No: 18C902

We are seeking a skilled and motivated Project Engineer / Senior Project Engineer specializing in ship repair and ship refit. The ideal candidate will have at least 5 years of relevant experience in the maritime industry and possess strong project management and technical skills. This role involves managing repair and refit projects from initiation to completion, ensuring compliance with technical, quality, and regulatory requirements.

Job Description

1. Project Management:

• Manage ship repair and ship refit projects, from planning through execution and delivery.
• Develop detailed project schedules, budgets, and resource plans.
• Coordinate with clients, vendors, and internal teams to ensure project objectives are met.

2. Technical Expertise:

• Oversee progress and technical requirements for repair and refit projects.
• Interpret technical drawings, design documents, and specifications.
• Provide guidance and suggestion to production teams during execution.

3. Quality Assurance:

• Ensure all ship repair and refit work adheres to established quality standards.
• Conduct inspections to verify compliance with design specifications and classification requirements.
• Address quality issues promptly with effective corrective actions.

4. Regulatory Compliance:

• Ensure all work complies with relevant maritime regulations and standards.
• Collaborate with regulatory bodies to secure necessary approvals and certifications.

5. Communication and Coordination:

• Maintain clear and effective communication with clients, team members, and stakeholders.
• Provide regular project updates and reports to management and clients.
• Facilitate problem-solving discussions to address challenges and maintain progress.

6. Risk Management:

• Identify potential risks to project timelines and budgets.
• Develop and implement mitigation strategies to reduce impact.
• Monitor risks and adapt plans as needed to maintain project success.

Qualifications:

• Min. of Diploma in marine engineering, Mechanical Engineering, or a related field.
• Minimum of 5 years of experience in ship repair or refit project engineering.
• Strong understanding of ship repair processes, techniques, and materials.
• Proficient in project management with a proven ability to deliver projects on time and within budget.
• Strong leadership, organizational, and team collaboration skills.
• Excellent communication and interpersonal abilities.

Preferred Attributes:

• Familiarity with High-speed craft systems and operational requirements.
• Experience coordinating with regulatory authorities and international clients.
• Completion of SRM (Shipbuilding and Repair Management) course is an advantage.

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

♦ Close supervision, Management and execution of construction works at site, including monitoring work progress and quality

♦ Manage, vendors, contractors and Sub Con for progression of work

♦ Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities' regulations.

♦ Responsible for the project quality and safety plan.

♦ Liaise with consultant and contractor for Green Mark certification processes

♦ Ensure company ISO and OHSAS requirements are fully implemented on project.

♦ Coordinating with authorities, clients, consultants and subcontractors on all project aspects.

♦ Work closely with Engineering team on any technical issues arising from site and lead the supervision and resolution of work onsite

♦ Ensure proper documentation and records of site works are carried out

1，Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Environmental/Health/Safety) or equivalent.

2. At least 3 year relevant experience construction.

3，Required skill(s): MS Office, AutoCad.

4，Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.,

5，Independent, proactive positive work attitude

*We regret that only shortlisted candidates will be notified.

The ASRS Operation Engineer is responsible for the maintenance, repair, and operation of Automated Storage and Retrieval Systems (ASRS) equipment to ensure optimal performance and uptime. This role involves performing preventive maintenance, diagnosing, and resolving technical issues, and supporting system upgrades and modifications to meet operational requirements. Taking up the role of Team leader of the shift.

Responsibilities:

• Operate ASRS equipment, including automated cranes, conveyors, and control systems, to perform material handling tasks such as loading, unloading, and storing goods in designated locations.
• Follow maintenance schedules and perform routine inspections and preventive maintenance tasks on ASRS equipment.
• Diagnose and troubleshoot mechanical, electrical, and software issues affecting ASRS equipment performance, using diagnostic tools, schematics, and technical manuals.
• Conduct repairs and replacements of defective components or parts, such as motors, sensors, actuators, bearings, and PLC modules, to restore equipment functionality.
• Coordinate with equipment vendors or service providers for technical support, spare parts procurement, and warranty/contract repairs as needed.
• Assist Maintenance Team in implement software updates, firmware upgrades, and system modifications to enhance ASRS performance, reliability, and safety.
• Monitor system operation through computerized interfaces or control panels, and respond promptly to alarms, error messages, or abnormal conditions.
• Ensure smooth operation with the aid of warehouse control system (WCS) and Humane Machine Interface (HMI).
• Ensure compliance with safety regulations and company policies by following proper lockout/tagout procedures, wearing appropriate personal protective equipment (PPE), and adhering to safety protocols during maintenance activities.
• Document maintenance activities, repair logs, equipment histories, and spare parts inventory using computerized maintenance management systems (CMMS) or other digital record-keeping tools.
• Provide training and technical support to operators and maintenance personnel on ASRS operation, troubleshooting techniques, and safety procedures.
• Participate in cross-functional teams for system upgrades, capacity expansion projects, or process improvements related to ASRS operations.
• Shift schedule planning, arrangement, and execution.
• Managing inventory accuracy, stock replenishment, and space utilization within the warehouse or distribution center environment. This role involves coordinating with various teams to ensure timely inventory transactions, cycle counts, and adjustments to maintain optimal inventory levels.

Qualifications:

• High school diploma or equivalent; technical diploma or certification in mechatronics, automation, or related field preferred.
• Proven experience in maintenance and repair of automated material handling systems, such as ASRS, conveyor systems, robotics, or similar equipment.
• Strong mechanical aptitude with knowledge of electrical, electronic, and hydraulic systems.
• Familiarity with PLC programming, HMI interfaces, and industrial control systems (e.g., Siemens, Allen-Bradley) is desirable.
• Ability to read and interpret technical drawings, electrical schematics, and equipment manuals.
• Excellent problem-solving skills and attention to detail in diagnosing complex technical issues.
• Effective communication skills and ability to work independently or as part of a team.
• Willingness to work flexible hours, including weekends or evenings, and respond to emergency calls as needed.

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills

Purpose: Responsible for the complete end-to-end planning, direction, and coordination of all the manufacturing processes related to system integration for a specific project. Together with the program team, the Manufacturing Engineer is to ensure that assembly can meet costs, quality, and delivery requirements.

Key Area of Responsibilities:

• Design of production layout to enable production to fulfill build plan forecast or pre-defined production run rate.
• Define requirements for assembly tools and equipment to support product realization and build plan.
• Participate actively in PQP to ensure that risks are identified, and preventive actions defined and implemented.
• Implement a certification program for assembly to ensure that assembly module leads are trained and certified to carry out specific assembly tasks.
• Collaborate with the Process Engineer in the design of the assembly Kit Kart for issue of materials into the clean room and effective handling of materials inside the production area.
• Lead in resolving technical problems faced by Assembly, and resolve internal and customer quality complaints.
• Monitor assembly capacity of the program, and perform ramp assessment when required, to fulfill build plan system delivery.
• Contribute to the system build progress meetings together with the program team to meet on-time delivery targets.
• Evaluate assembly efficiency and implement improvements to achieve the calculated standard time.
• Monitor all customer's consigned equipment to ensure all are inventoried, calibrated, and maintained regularly.
• Identify and implement improvements to shorten production cycle time, improve overall production efficiency, improve quality performance, enhance safety or to boost sustainability.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering)
• At least 3 year of experience as an engineer in the manufacturing assembly environment.
• Strategic, creative, and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

• Research, design, and develop new circuits, technology, modules, and devices
• Strategise on architectural and electronic designs, product pipelines, and new potential technology and devices
• Identify, analyse, recommend, and develop next-generation improvements for existing circuits, technology, modules, and devices
• Conduct evaluations and recommend modifications on existing designs and prototypes based on performance in quality test and customer feedback
• Ensure reliable and consistent performance and function of existing designs for circuits, technology, modules, and devices in operating environments
• Perform circuit analysis, run simulations, create schematic drawing and PCB layouts, and produce wiring programs using respective softwares
• Design, develop, and execute testing and investigation methods / procedures for circuits, technology, modules, and devices with the use of Automated Test Equipment (ATE)
• Prepare engineering sketches and specifications, design and test documentation, product specification or Bill of Materials (BOM), and product development timeline
• Coordinate with relevant teams to ensure design manufacturability and testability
• Keep updated on technology and regulation development

Requirements:

• Good understanding of electrical engineering codes, electronic systems, component materials and safety standards
• Possess hands-on experience using design and calculation software
• Strong analytical, problem solving and conceptualisation ability
• Strong interest in technology
• Ability to think outside the box and manage complexity
• Strong team player and customer-oriented with strong interpersonal and communications skills
• Proactive, enthusiastic with “can do” attitude
• Meticulous, self-reliant and strong sense of urgency
• Committed, motivated and able to handle multiple tasks simultaneously

Main Responsibilities:

• Taking care for infrastructure support such as servers, storages, VMWare, Firewall (Checkpoint), cisco Switches, wireless AP, VPN, etc.
• Assist 1st level / 2nd level support on any technical related issues.
• Administering and overseeing network infrastructure
• Provide support for video conferencing (Microsoft Teams), and meeting equipment, projector, microphone, etc.
• Provide knowledge transfer for the projects deployed to end-users.
• Manage, support, train users for Microsoft 365 services, such as Outlook, OneDrive, SharePoint, Teams, etc.
• Support IP phone, printers, projectors, display TV, CCTV, and door access, with the assist from vendors.
• Any other Technical related tasks as assigned.

Job requirements:

• Min Diploma in IT / Computer Science / relevant field or higher.
• At least 5-years experience in a similar position is preferred
• Knowledge and experience in cyber security will be an advantage.
• Experience in Network, routing protocol.
• Knowledge of Active Directory, DNS, GPO, Office 365, SQL Server, Druva etc
• Good communication skills and fluent in common language.

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical/Metallurgical engineering or equivalent.
3. Must have valid API 510, API 570, API 571 and API 653 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience in Shell Bukom Singapore.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping, tanks and columns.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Responsibilities:

• Work within the Quality Group and the Package Team and liaise with all project team members, such as Engineering, SCM Document Control and Vendor Inspection Coordinator etc.
• Participate in review Material Data sheets. development and issuance of Material Requisition/ RFQ.
• Understands and ensure quality requirements in built into the RFQs and POs documents as well as all the package specific Quality Requirements.
• Review the Technical Bid documents submitted by vendor
• Engages in the review and response to the Technical Clarification on Quality related issues
• Issues Quality Bid Technical Evaluation report for each Bid Package
• Participates in PO award recommendation
• Interfaces with the Vendor Inspection Coordinator wherever source inspection is required.

Requirements:

• Degree in Mechanical Engineering.
• Minimum of 5 years’ experience in equipment procurement for oil & gas/ offshore industries.
• Possess CompEx certified (Module 11), ISO 9001:2015 Lead Auditor, NORSOK / PED requirement, ASME / ASTM / API codes, DNV-GL codes and standards and basic knowledge of NDT

Our Addresses and Working Hours:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Professional are responsible for identifying, analyzing, and relating business
demands. Your responsibilities include aligning priorities, planning and actions
to the overall business objectives. And involve business stakeholders. You will
share and communicate knowledge and innovation. You have knowledge of
the fundamentals of the Semco business model and the value chain.
The function is directly responsible to assist the Project Manager in all aspects
of the assigned project.

• Assist Project Engineers in producing telecom system drawings for
approval submission
• Check system compliance for project requirements and translate to project
documents.
• Checking of equipment ordered for a specific project, ensuring technical
compliance with relevant specification requirements
• Provide project progress updates and status reports to Project Manager
• Provide technical support to system assembly and fabrication, and ensure
assembly is done according to project requirements
• Assist Project Engineers to organize and plan usage of available
resources to achieve optimal performance and cost efficiency for each project
• Assist Project Engineer to report, follow-up and resolve on
non-conformance issues and customers’ complaints
• To maintain Semco’s quality policy and take active part in implementing
quality system
• Critical adherence to deadlines
• Assist the Project Engineer to monitor project deliverables in terms of
delivery and quality control
• Assist in site commissioning if required

We are looking for individuals with the following qualifications and experience:

• Education: Bachelor's Degree in Telecommunications, Electrical & Electronics Engineering, Computer Engineering, or IT.
• Experience: Entry-level candidates welcome

Personal Qualities:

• Excellent analytical and problem-solving skills.
• Strong attention to detail and organizational skills.
• Team player with a positive and proactive attitude.
• Excellent communication and interpersonal skills (written and spoken English).
• Ability to work independently and as part of a team.

♦ Close supervision, Management and execution of construction works at site, including monitoring work progress and quality

♦ Manage, vendors, contractors and Sub Con for progression of work

♦ Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities' regulations.

♦ Responsible for the project quality and safety plan.

♦ Liaise with consultant and contractor for Green Mark certification processes

♦ Ensure company ISO and OHSAS requirements are fully implemented on project.

♦ Coordinating with authorities, clients, consultants and subcontractors on all project aspects.

♦ Work closely with Engineering team on any technical issues arising from site and lead the supervision and resolution of work onsite

♦ Ensure proper documentation and records of site works are carried out

1，Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Environmental/Health/Safety) or equivalent.

2. At least 3 year relevant experience construction.

3，Required skill(s): MS Office, AutoCad.

4，Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.,

5，Independent, proactive positive work attitude

*We regret that only shortlisted candidates will be notified.

Roles & Responsibilities

• Attend to Client’s site surveys, meetings and maintain constant contact/communication regarding project works (In progress and new)
• Work closely with the drafting department to come out with preliminary design (for client’s approval), material take off and cost estimation for the new potential projects
• Carry out cost estimation and prepare quotation for clients
• Procurement of materials and consumables required to carry out the fabrication work
• Work closely with clients during project execution with regards to schedule, determination of hold points (for testing and inspection) and project close up
• Overall in charge of project’s delivery schedule, cost control, quality and safety (i.e. ensure that projects are carried out within budget, schedule and with zero rework and safety incident)
• Carry out daily meeting with the supervisors to plan, prioritize, review and update status of projects
• Prepare Risk Assessment for Clients review and approval prior to work start
• Update project status during the project weekly meeting
• Check and ensure proper documentation (such as test packages, as-built drawings etc) are in place prior to project close up
• Ensure D.Os, Job Completion forms and invoices are in place (signed, submitted and filed promptly) within 1 week of project close up
• Maintain accountability to the individual client site based on sales records, quality control and safety records
• Ensure overall safety well being of workers in the workshop as well as the on site during project execution
• Carry out at least one Monthly safety Audit using the Audit Checklist
• Attend and participate all Safety Meetings organized by Clients

Education & Work experience Requirements:

1. At least Bachelor's degree in Automation, Control Engineering, Internet of Things (IoT), or related fields.

2. At least 3 years of relevant work experience in the structural steel industry.

Job Description:

1. Develop and optimize automation solutions based on production requirements, and coordinate with teams to deploy automated inventory management systems.

2. Design and improve automated steel structure production processes, integrating industry-standard software (e.g., Tekla) with processing equipment to achieve automated cutting, assembly, and welding.

3. Maintain existing production lines and propose improvements to minimize manual intervention and increase efficiency.

4. Collaborate with teams to ensure seamless integration of automated systems with existing production management systems, and provide training and guidance on new equipment and systems.

5. Generating reports outlining new automation ideas, machine and software upkeep best practices, test results.

Key Skill & Competency Requirements:

1. Proficiency in sensor principles and applications, with the ability to design and optimize sensor-based monitoring and control systems.

2. Proficiency in embedded systems design, including embedded hardware development, microcontroller programming (e.g., ARM, STM32), and real-time operating systems (RTOS).

3. Familiar with C# programming.

4. Familiar with mainstream automation development tools and software, such as LabVIEW, MATLAB/Simulink, Siemens TIA Portal, and AVEVA System Platform.

5. Familiar with industrial automation technologies, including PLC programming, servo control, and industrial robotics.

6. Familiar with smart manufacturing technologies (e.g., Industry 4.0, MES systems, IoT devices) and their applications in steel structure manufacturing.

Purpose: To retrieve and analyse data to determine the company's needs and provide support in decision-making.

Key Area of Responsibilities:

• Understand the stakeholders' requirements and assess the technical feasibility of implementing the best solution to achieve the highest added value.
• Develop BI tools such as reports and dashboards for the various process owners and management to meet business needs.
• Develop automation tools/applications or IT-related solutions to improve the efficiency of the various processes in the organization.
• Develop/source and implement new technologies/capabilities to develop more efficient and secured business processes.
• Identify areas where there is an opportunity to significantly improve the efficiency and security of the business processes, and where there is currently no capability or tool available in-house.
• Create user guides and documentation for the various BI and process automation tools, to ensure usability and maintainability.
• Share the solution, including the user guides and documentation, with the Digital Factory Team so that all BI Engineers can use the knowledge for future projects and back up each other.
• Support and participate in company's continuous improvement program.

Qualification & Experiences:

• Degree in Engineering, Science, Business and Finance or other relevant field.
• Minimum 2 years of experience as a business intelligence engineer in the semiconductor industry.
• Certified Business Intelligence Professional (CBIP) will be an advantage
• Knowledge of Lean Six Stigma
• Proficient in advanced Excel functions
• Knowledge of different programming language (Javascript, Python & C#)

Job Responsibilities:

• Establishes networking environment by designing system configuration, directing system installation, defining, documenting, and enforcing system standards
• Maximizes network performance and optimization by monitoring performance, troubleshooting network problems and scheduling upgrades when necessary
• Oversee maintenance of all IT system in line with IT security policy
• Secures network system by establishing and enforcing policies, defining and monitoring access
• Ensure project tasks are completed on time and project goals are achieved

Relevant experience:

• 1-2 years of experience in network engineering, administration, or related roles

Basic skills required:

• Diploma / Bachelor degree in IT related field
• Strong understanding of network protocols (Eg: TCP/IP, DNS, DHCP, BGP, OSPF)
• Knowledge on LAN/WAN networking, network design, problem solving, network hardware configuration and project management
• Familiarity with cloud networking (AWS, Azure, Google Cloud) is a plus
• Knowledge of network security best practices and tools
• Excellent problem-solving and analytical skills
• Responsible, resourceful, customer oriented and an independent player

Job Description & Requirements

• Perform general electrical maintenance including troubleshooting and repairing malfunctioning equipment.
• Identify the root cause and conduct analysis to generate solutions.
• Ensure completion of all protective maintenance duties are following the safety standards that complying with company policy.
• Install improvements and major upgrades to process system.
• Provide engineering support in project or plant maintenance
• Alert the Engineer Managers of any unusual incident that have taken place.
• Monitor the equipment process and prevent the equipment breakdown.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Job Requirements:

• Good interpersonal and communication skill
• Work independently
• Attention to details
• Good problem solving and observing skills

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Degree/Diploma in Electrical Engineering or equivalent
• Min 3 years experience in machine tool or automation environment
• Experience in CNC Machinery assembly process and automation will be advantageous
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills