The key functions of Process Engineer is to:

1. Applies Engineering principles and techniques to optimise production process in the fab to meet department and organization goals and objectives

2. Analyse and troubleshoots process engineering, manufacturing, and maintenance issues, and recommend engineering solutions or developed work instructions for out of control processes

3. Leads production and manufacturing systems, improvement projects and develop operation plans in accordance with department and organization objectives alighn with regulatory requirements.

Tasks:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 5 years of relevant work experience in Thin Film CMP Process
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

PRODUCTION ENGINEER/ EXECUTIVE ($3,500 - $4,000)

LOCATION: PANDAN RESERVOIR

WORKING TIMING: 7.30AM-5.00PM (5DAYS WORK WEEK)

1. We need a engineer or assistant engineer with mechanical educational background or years of experience hand on mechanical troubleshooting.

2. We can also search for experience technician that want to upgrade as assistant engineer or engineer.

JOB DUTIES & RESPONSIBLITIES:

1. Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.

2. Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.

3. Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.

4. Work with HR Department and assure that employee grievances are addressed in a timely fashion.

5. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.

6. Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.

7. Maintain and improve housekeeping in all areas.

8. Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.

9. Ensure on time submission of overtime record to HR Dept for computation of monthly salary.

10. Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.

11. Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.

12. Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.

13. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.

14. Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.

15. Assist in hiring of production personnel.

16. Maintain and update operating manuals for all the manufacturing equipment and facilities.

17. Maintain and update operating training manuals for all manufacturing processes.

18. Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Skill/Experience

* Minimum 2-3 years working experience in manufacturing environment.

* NITEC/ HIGHER NITEC / DIPOLMA IN M&E OR MECHANICAL

* Able to supervise and lead the subordinates.

* Willing to work after working hour or during non-working days.

* Able to work under pressure.

* Computer literate.

* Knowledge in ISO is an advantage.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei

EA Registered no.: R1543992

Recruit Now Singapore Pte Ltd

EA License no.: 21C0845

What you will be working on:

● Innovate and Build: Design and develop new, cutting-edge features for WebOrion®,

enhancing its ability to safeguard against web and API vulnerabilities.

● Pioneer AI Security: Research and create advanced modules for our next-gen AI firewall

that defends against AI-driven cyber threats.

● Full-Stack Impact: Manage and maintain databases, APIs, software, servers, and cloud

infrastructure.

● Agile Development: Contribute to an agile lifecycle—coding, debugging, testing, deploying,

and improving software releases.

● Customer-Centric Support: Provide top-notch technical support for our global enterprise

customers.

What we are looking for:

● Bachelor’s or Master’s Degree in Computer Science/ Engineering, Information Technology or

equivalent

● Hands on experience with Docker and programming languages such as Golang or Python.

● Interest in Security for AI. Defending against the next wave of AI attacks.

● Have a good understanding of RESTful APIs, databases, messaging queues, CI/CD tools

and software testing. Experience with Linux command-line and Git

● Able to write and document technical concepts

● Teamwork skills with a problem-solving attitude

● Preferably 1–2 years of relevant experience, though exceptional fresh graduates with

solid internship experience are welcome.

● Must be based in Singapore.

Why Join Us:

• Innovate for Impact: Be part of the team that's building a revolutionary AI firewall to
• defend against AI-driven threats, redefining the cybersecurity landscape.
• Global Exposure: Work with enterprise customers across ASEAN, Europe, and the
• US, gaining valuable international experience.
• Cutting-Edge Projects: Build cool cybersecurity products while working at the nexus of
• web, cloud, and AI security.
• Career Growth: Join a fast-growing company where your contributions make a real
• difference.

Interested applicants, please drop us a note at [email protected] with your CV and cover letter.

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Provide 24x7 support for all Diffusion Wet Equipment Tools and Issues

Task:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach junior engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 7 years of relevant work experience in Diffusion Wet / Wet Etching Equipment
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Responsibilities:

1. Develop and release warranty claims policies for service providers.
2. Review and settle service provider claims.
3. Provide training and support for service providers on claims processes.
4. Inspect and supervise the disposal of service provider claim parts.

Recruitment Requirements:

1. Minimum Bachelor in any field.
2. At least 3 years of warranty admin experience in automotive industry.
3. Strong communication skills, preferred proficiency in English and Mandarin to liaise with HQ colleague.

Responsibilities

Support engineer to perform daily operation tasks as follow:

• To provide technical support and troubleshooting for end user devices, including but not limited to laptop computers, mobile devices, monitor screen, docking stations, printers, network devices, etc.
• To track, maintain and perform record-keeping of Novo Nordisk IT assets such as laptop, iPhone, iPad, and monitor screen.
• To assist with new employee onboarding by providing necessary devices and access according to Novo Nordisk policy
• Coordinating with local vendors for computer parts replacement, RMA, and warranty claim
• Performing imaging process of Novo Nordisk laptop for Windows 10 and Windows 11 operating systems when necessary
• Other IT-related ad-hoc tasks as assigned
• VIDEOCONFERENCING MAINTENANCE
• Onsite diagnostic support for meeting room video conferencing equipment
• To provide service reports on the findings of issues reported

Requirement / Qualification

• 3 to 5 years’ experience as I.T support engineer
• Minimum – Diploma in I.T or relevant

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a Research Engineer to join our research team to work on related Soft Robotics.

Key Responsibilities:
To design, build and test whole hybrid robot systems for specific scenarios.

Qualifications

• Possess a bachelor’s degree in biomedical engineering or related field.
• Have relevant experience with hybrid robot system development and evaluation.
• Have good knowledge of soft robot actuator/sensor/integration fabrication.
• Good written and spoken communication skills and the ability to collaborate effectively in a team environment.
• Open to fixed-term contract.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a Research Engineer to join our research team to work on related Soft Robotics.

Key Responsibilities:

To design, build and test whole hybrid robot systems for specific scenarios.

Qualifications

• Possess a bachelor’s degree in biomedical engineering or related field.
• Have relevant experience with hybrid robot system development and evaluation.
• Have good knowledge of soft robot actuator/sensor/integration fabrication.
• Good written and spoken communication skills and the ability to collaborate effectively in a team environment.
• Open to fixed-term contract.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

RESPONSIBILITIES:

• Work with customer NPI engineer to understand the newly introduced product base on the design requirement, pre-review the process and actively feedback for potential improvement, and ensure flawless transfer.
• Coordinate NPI activities to different function (Product/Process Engineering Team) prior build.
• Work with Production team to validate process method and parts to be used prior site pilot to make sure all requirements are met.
• Work with Technical support team to make sure all production line requirement (e.g. Jig, fixture, torque drivers etc.) are met.
• Design the in-house fixture/jigs if applicable and provide the design requirement to technical support team for fabrication.
• Provide technical support to production to solve issues encountered during the site pilot and Material Validation Build.
• Ensure smooth handover to mass run by conduct training to related team on new process / WI.
• Ensure all issues and operation feedback are captured, reviewed and follow up for proper closure. Identify opportunity for improvement.
• Assists customer and internal team for Kaizen projects, including 8D and CAPA.
• Performs other related duties as assigned.

REQUIREMENTS:

• Bachelor’s degree in Manufacturing Engineering Technology, or related field required.
• Minimum 2 years experience in manufacturing engineering or relevant field
• Prefer to have server/storage product experience

Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]

------------------------------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:

Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

West Region, Singapore

Sales Representatives/Consultants (Sales)

Full time

$3,500 – $5,000 per month (SGD)

Key Responsibilities:

• Promote and sell hygienic components, such as sanitary tubes, fittings, valves, and seals, to clients within the F&B, pharmaceutical, and semiconductor industries.
• Build and maintain strong relationships with key accounts, ensuring a high level of customer satisfaction.
• Identify and capitalize on new sales opportunities by understanding client requirements for hygienic components.
• Provide clients with detailed information on hygienic products, focusing on their applications within clean and contamination-sensitive environments.
• Meet or exceed sales targets, ensuring consistent growth in the market share of hygienic components.
• Collaborate with internal teams to address customer needs, ensuring timely delivery of products and solutions.
• Keep abreast of industry developments, trends, and regulatory requirements relevant to hygienic components.
• Assist in creating quotations, proposals, and contracts tailored to client specifications.
• Maintain detailed records of sales activities, customer interactions, and feedback.

Qualifications and Skills:

• Proven experience in sales, particularly in selling hygienic components to the F&B, pharmaceutical, or semiconductor sectors, is highly preferred.
• Strong communication, negotiation, and relationship-building skills.
• Bilingual in English and Chinese will be advantageous.
• Customer-oriented approach, with a focus on delivering tailored solutions to meet specific industry needs.
• Driver license with own transport will be advantageous.

Working hours: Mondays to fridays 9am to 6pm Singapore time

Responsibilities:

• Design, implement, and manage scalable and reliable infrastructure solutions using cloud platforms (e.g., AWS, Azure, Google Cloud) to ensure 99.99% uptime for a system averaging > 100 requests per second
• Implement Infrastructure as Code (IaC) practices to manage and provision infrastructure programmatically.
• Set up and manage monitoring and logging solutions to track system performance, detect issues, and ensure high availability.
• Implement and enforce security best practices to safeguard systems and data, including managing access controls, encryption, and vulnerability assessments that comply with ISO 27001
• Work closely with development, QA, and operations teams to understand their needs and ensure that infrastructure and processes support their objectives.
• Stay current with industry trends, emerging technologies, and best practices to enhance system performance and reliability.

Requirements:

• Bachelor's degree in Information Technology, Computer Science, or related field.
• 4+ years of experience in devops on cloud platforms, deploying & maintaining containerized applications for applications averaging > 100 requests per second
• Proficient with AWS and all its core services
• Expert with Kubernetes & Docker
• Proficient with CI/CD tools like Jenkins, CircleCI, Bitbucket Pipelines
• Proficient in IAC using Terraform & Ansible
• Proficient in scripting with python or shell scripts
• Experienced with monitoring & log management tools like Datadog, Prometheus, Grafana

Summary

The Apple Services Engineering team is one of the most exciting examples of Apple's long-held passion for combining art and technology. These are the people who power the App Store, Apple TV, Apple Music, Apple Podcasts, and Apple Books. And they do it on a substantial scale, meeting Apple's high expectations with dedication to deliver a huge variety of entertainment in over 35 languages to more than 150 countries. These engineers build secure, end-to-end solutions. They develop the custom software used to process all the creative work, the tools that providers use to deliver that media, all the server-side systems, and the APIs for many Apple services. Thanks to Apple's unique integration of hardware, software, and services, engineers here partner to get behind a single unified vision. That vision always includes a deep dedication to strengthening Apple's privacy policy, one of Apple's core values. Although services are a bigger part of Apple's business than ever before, these teams remain small, forward-thinking, and multi- functional, offering greater exposure to the array of opportunities here As a software engineer on the Apple Services Engineering (ASE) Core Services team, you'll create and enhance features that elevate the customer experience for millions of users worldwide. Collaborating with cross-functional teams, you'll work on large-scale systems, leveraging distributed data stores with a focus on scalability and performance. We foster creativity, engineering excellence, and innovation to make a meaningful impact.

Description

You will be part of the server team that powers customer-facing features within the Apple client applications - Apple Music, Apple Podcasts, Apple TV, App Store, Apple Arcade, Fitness+ etc. You will be working multi-functionally with various teams across Apple to deliver some really exciting features to our customers. Thinking about service performance is a constant thing for us, and we are searching for someone like-minded. If you are used to thinking about performance in terms of median, 95th percentile and 99th percentile, then we are looking for you. You would be someone who is not afraid to question assumptions, is a phenomenal teammate under tight deadlines and seeks problems with sophisticated technical solutions.

Minimum Qualifications

• Bachelors or Master's degree in Computer Science/Engineering or equivalent technical discipline.
• At least 3 years of professional software engineering experience
• Proficiency in JVM languages like Java, Scala, Clojure or other object oriented programming languages such as C++, GoLang, C# etc.
• Strong object oriented programming skills with deep knowledge of data structures and algorithms.

Preferred Qualifications

• Multiple years of experience developing and scaling high-availability, low-latency distributed systems
• Experience in designing and implementing RESTful APIs or other API technologies.
• Exceptional problem-solving, critical thinking, and communication skills.
• Expertise in writing robust unit and integration tests
• Familiarity with NoSQL technologies, including but not limited to Solr/Lucene, Redis, Memcached, Cassandra, and Voldemort

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

Joreen Hung | Reg No.: R24119971

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA preferred
• Good communication and problem-solving skills
• Medical product experience and Quality Management System exposure preferred

Joreen Hung | Reg No.: R24119971

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Duty and Responsibility

1. Procurement engineers oversee the purchase of technical equipment for industrial operations.
2. They collaborate with designers/Site to determine the equipment needed to complete manufacturing or construction projects according to specifications, research vendors for that equipment, then order it.
3. These engineers negotiate purchase agreements with vendors and award contracts to vendors for equipment.
4. They also monitor any adjustments to the equipment needed to maintain an optimum supply of equipment to complete projects on time and within budget.
5. A procurement engineer must possess high-level organization and record-keeping skills to maintain a consistent flow of equipment to the company’s factories or worksites and ensure vendors are fulfilling the terms of their contracts. Influencing and negotiation skills are also crucial for procurement engineers, as it’s up to them to negotiate the purchasing agreements for engineering equipment and hire vendors for projects.

Requirement

At Least have 5 years Construction Sector

Experience

Good communication skills to liaise with associates, clients, Supplier, government authorities.

Good team player

DUTIES AND RESPONSIBILITIES:

Primary responsibility is the Engineer function for Singapore TCM.

1. Responsible for troubleshooting equipment failures
2. Plan, schedule and perform predictive and corrective maintenance
3. Ensure accurate and updated maintenance records
4. Provide maintenance report and conduct meeting
5. Develop and implement maintenance procedures
6. Track uptime, downtime, MTBF and MTTR of CDS
7. Perform FMEAs and implement solutions
8. Manage spare parts inventory and ordering
9. Lead Service Team/Technicians in the timely completion of all required tasks
10. Prepare training materials and provide trainings for site operations & service personnel on equipment operation and maintenance
11. Ensure high standard on safety and housekeeping and assist in such audits
12. Generate reports and presentations on all related activities, abnormal or incidents
13. Lead startup, commissioning, installation of CDS, SDS and process systems
14. Involved in improvement plan
15. 24 hours standby for emergency activation or shutdown
16. Do roaming check on all chemical rooms, CDM & SDM to make sure the all are in order.
17. Report all abnormal conditions & findings to Customer’s Facility Engineer and TCM Manager.
18. Response to all complaints and requests from Customer’s Facility personnel or POU personnel and work closely to solve problems; escalate to high level if necessary.
19. Perform miscellaneous job-related duties when necessary & upon request by client or TCM managers.

Additional Duties:

• Guide and provide necessary training for new Service Technician / Shift Technician on all related system operational matter and guide on troubleshooting.
• To back up and support for site TCM Supervisor/Lead Engineer duties whenever is required.

Required critical behaviours

• Strong customer focus
• Generates a motivating and trustful working environment
• Encourages innovation and search for new solutions
• Is future, goal and performance oriented
• Possesses leadership quality and is a team player
• Upholds responsibilities assigned
• Good communications skills
• Good interpersonal skills

Required qualifications/experience

• Diploma/Degree in Engineering field or equivalent (preferred in Chemical / Mechanical / Mechatronics / Electrical & Electronic or Control & Instrumentations)
• Good in computer skill and Microsoft office

ABOUT AMS

The Airspace Mobility Solutions (AMS) business, part of the Global Business Unit Land and Air Systems, is providing leading edge Air Traffic Management (ATM), Unmanned Traffic Management (UTM), Security and Digital Aviation solutions for the Commercial and Defence sectors.

The AMS business manages 11% of the world’s airspace and with revenues of over 500 million Euros worldwide, is the global market leader in airspace management solutions. In Singapore, the business focus is the delivery and support of two key ATM solutions including TopSKY-ATC(HE) and LORADS-III.

ROLE DESCRIPTION SUMMARY

You will be a member of the software squad which maintains LORADS3, the current ATM system used operationally by the Civil Aviation Authority of Singapore. As such, you will be supporting the program by analysing/fixing PCRs. Additionally, you will be tasked to robustify given test frameworks.

Immediate opportunities to upskill and learn the domain & life cycle of an ATM in operation will be provided via a learning mission in our AMS Headquarters in Singapore for a duration of 6-8 weeks. Here you will be guided in a structured regimen of theoretical and practical learning, with the goal of returning to Singapore as an immediate contributor.

KEY ACTIVITIES AND RESPONSIBILITIES

As aSoftware Engineer, you are accountable for:

· Designing and delivering software to meet requirements including architecture, design, reuse, development, integration and verification.

· Defining and tailoring the software engineering environment and the process, practices and tools applicable to the project.

· Ensuring that the designed solution is developed according to design, schedule, cost and quality expectations.

· Identifying risks and proposing effective solutions; executing mitigation actions and reporting on outcomes and residual risks.

· Participate in the engineering activities (e.g., design katas, coding katas) of the COC

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

Relevant bachelor’s degree or Master Degree

Technical skills

§ Must-have

ü Language: working knowledge of Java Core, Junit.

ü IDE/CICD Tools: GIT, Bitbucket, Jenkins, Eclipse, JIRA

ü Knowledge of formal software engineering process throughout lifecycle

§ writing & reviewing design, requirements, tests and code

ü Agile methodology: Scrum

ü Devops culture and CICD methodologies

§ Nice-to-have

ü Language: any others like ADA, C++

ü Air Traffic Management domain knowledge

ü Experience in software development in a safety-critical environment

Other

Interpersonal skills

ü Sense of ownership

ü Team player

ü verbal and non-verbal communication,

ü listening skills,

ü problem solving,

ü decision-making,

ü assertiveness,

ü patience,

ü empathy

Key Responsibilities:

• Overseeing projects at one or multiple stipulated sites.
• Assist project manager is the execution of the projects.
• Responsibilites for co-ordination with Consultants, Architects and relevant authorities.
• Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.
• Monitor and ensure progress of works are carried out according to project specification.
• Design schematic drawing, layout drawing, P&ID drawing.
• Review and check drawing before submit to main contractor.
• Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.
• Support project manager in the administration of contract, claim, variation and any dispute arise.
• Raise MR and order material & arrange manpower for necessary works.
• Advise site team for work schedule and technical issues.
• Make sure project is carried out according to schedule.
• Responsible for site supervision and implementation.
• Responsible for ensuring implementing safety measures.

Requirements:
- Minimum diploma
- 3 years or above experiences in ACMV, especially in air-conditioning industry
- Able to use AutoCAD or other related software for ACMV Design
- Able to communicate Fluent in English
- Minimum 3 years in ACMV Sector

RESPONSIBILITIES;

• To done a stage wise inspection of (FITUP inspection, WELDING inspection and PDI (predelivery inspection).
• Ensure the stage wise IPV (In process validation) and prepare regular written QC & QA report
• submitted to the customer.
• Final inspection - Ensure the body visual orientation and materials against the customer IPV(In
• process validation).
• Responsible for documentation process for customer CAT (caterpillar) provide standards prepare
• quality document to every inspetion stage.
• Check the incoming materials by confirming specifications conducting visual and measurement
• tests rejecting and returning unacceptable materials.
• Ensure the Incoming stock material Quality and then give aprove for the stocks through the
• provided SAP (System application product).
• Perform detailed documentation to track project development and design process
• Ensure project timeline is met and project stays within budget

Qualifications for Mechanical Engineer

• Bachelor's degree in mechanical engineering or in a related field
• Firm grasp of engineering concepts, and experience desiging mechanical systems and products
• Excellent math skills: ability to apply advanced mathematical principles and statistics to solve problems
• Experience using CAD software such as SolidWorks, AutoCAD, or similar
• Exceptional technical and problem-solving skills and reasoning ability
• Ability to communicate effectively and clearly
• Must be self-motivated and a great team worker

Key Accountabilities

• Technical support to Group sales affiliates in the region for product groups such as control products, IAQ products and air conditioning installation material products
• Perform as the technical supporting desk
• Support the installation and commissioning for each job site
• Create demo kits for assigned product for regional promotion
• Support the marketing department to give the technical advice for the sales promotion enhancement
• Analyse and test product failures for better quality achievement
• Any adhoc duties as assigned by superior

Requirements

• Degree in Electrical/Electronic/Mechanical Engineering, or relevant
• Experience in air-conditioning or electrical industry will be an advantage
• Proactive and influential personality with ability to persuade and drive decisions
• Good to have PC programming and drafting skills
• Willing to travel with APEC regions

The key functions of Process Engineer is to:

1. Applies Engineering principles and techniques to optimise production process in the fab to meet department and organization goals and objectives

2. Analyse and troubleshoots process engineering, manufacturing, and maintenance issues, and recommend engineering solutions or developed work instructions for out of control processes

3. Leads production and manufacturing systems, improvement projects and develop operation plans in accordance with department and organization objectives alighn with regulatory requirements.

Tasks:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 5 years of relevant work experience in Thin Film CMP Process
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

(Hiring for new branch located at BUKIT BATOK area)

IF YOU ARE looking for...

• Career advancement with work-life balance;
• Substantial flexibility in workplace;
• Mon.- Fri. office working hours
• Salary Range: Basic salary $2,600 ~ $3,500 + Incentive/Commission + Creative Performance Bonus)

Responsibilities

• Responsible for developing long term customer relationship and maximizing customer retention;
• Support on pre-sale and post-sale, not limited to solution proposal on technical requirement, design & budget control, timeline management, etc. based on projects;
• Participate in industrial related exhibitions, marketing campaigns/events;
• Other ad-hoc duties assigned by the superior.

Qualifications

• Min. Higher Nitec in Engineering (any field), or equivalent;
• Entry level applicants with the right learning attitude and positive minder are welcome to apply as comprehensive On-Job-Training will be provided;
• Excellent written and oral communication skills
• Pro-active, possess technical and Negotiation/social problem-solving skills with attention to details;
• Posse valid Class 3 driving licence is a MUST

How to apply,

Please submit your application together with your comprehensive resume, not limited to the education background, career history (if any), current and expected salary(if any), and availabilities to commence work.

(We regret to inform that only shortlisted candidates will be notified)