Responsibilities:

· Project management involving Sanitary, Plumbing & Gas Services

· Documentation of method statement and work procedures

· Review and monitor site construction activities programme to ensure work completion as scheduled

· Evaluation, Cost estimation & analysis for Sanitary, Plumbing & Gas Services

· Preparation of design construction drawings

· Liaison with all parties involved in the project including Local Authorities, Consultants, Architects, Main contractor, Sub-contractors & Suppliers

· Attend site meetings and inspections.

Requirements

· Degree / Diploma in Mechanical or related discipline

· Knowledge of tender costing with experience in evaluation and cost estimation for Sanitary, Plumbing & Gas Services will be an added advantage

· 3 years working experiences in similar position with relevant design and installation knowledge preferred but fresh graduate may apply

· Excellent interpersonal communication skill, innovative and result oriented

· Ability to work independently in a challenging and demanding environment

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Tasks:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• ecome the technical Expert for the respective machine specialization.
• ● Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials / Material Sciences Engineering
• 5 years of relevant work experience in Etch Equipment in the semiconductor industry
• LAM tools preferred
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

OTSAW Digital is seeking creative, energetic well-rounded Product Development Engineer to work in the field of autonomous robot technology.

You will be responsible for integrating and testing software solutions in simulation and on the robot. We are looking for engineers who are interested in tackling challenging problems for our robots.

At OTSAW Digital, we want people with passion. We want innovators. We want people who can collaborate and bring us a creative future. So, if you are passionate about working in a startup, want to solve hard problems and make cool robots with us, please apply.

Responsibilities:

• Oversee and in charge of technical matters (both Software and Hardware) for assigned product line.
• Support Commercial Team in technical evaluation of new projects requirement, translating customer needs into product design and development requirements.
• Conceptualize and prototype new product ideas.
• Design and conduct validation test for new product functions, features.
• Fine-tuning product designs until they are ready for production.
• Delivering product specifications and procedures to the manufacturing team for production purposes.
• Delivering product specifications to the commercial team for sales purposes.
• In charge of troubleshooting and correction for technical issues escalated to R&D department.
• Coordinate and manage Development projects for assigned product line.

Requirements:

• 2-3 years working experience in relevant fields.
• Min. education qualification: Bachelor Degree in Robotics Engineer, Mechatronics, Computer Engineer, Electrical Engineer, Mechanical Engineer or other Engineering related course
• Strong foundation in Electrical, Mechanical and Software System are preferred
• Demonstrate deep interest & understanding in relevant domain of interest
• Experience in developing on actual physical robot is a plus
• Experience in any of the following C++, Python, ROS, JS, Git, Autodesk Eagle, Autodesk Inventor is a plus

As an Associate Engineer in Product Support Organization, within the Aftermarket Products & Services (APS) Business Unit, this role is responsible for the technical activities that support the repair and refurbishment of goods. This includes the completion of the quality of goods meeting schedule timelines.

The Associate Engineer ensures smooth repair and refurbishment of goods:

• Repair and refurbishment support: Ensure assemble of goods with accuracy
• On time delivery: completion of work order within the scheduled time frame

Responsibilities

• Create repair and/or refurbishment work orders.
• Expedite support and coordinate the replenishing of materials and work with materials planners to proactively solve raw material issues.
• Ensure materials are issued correctly as per work order.
• Perform Troubleshooting and Diagnostic based on Troubleshooting Guide
• Perform bonding and data collection based on Standard Work Instruction and Test Procedures (~2 - 4 hours standing and using microscope)
• Disassembly, assembly and Testing of Mechatronics Assemblies module to Standard Work Instruction and Test Procedures.
• Update system records in a timely upon completion.
• Support Agility Training to all Product Lines based on Supervisor’s assignment.
• Performs other duties as assigned.

Qualification

• Minimum qualification of Vocational Certificate/NITEC in Electrical or Mechanical Engineering
• Minimum experience of 2 years in the semiconductor/ manufacturing industry
• Basic knowledge of wire bonding and/or die bonding technology is preferred
• Able to work independently to troubleshoot and analyze machines and spares issues when needed
• Possess good written and communication skills
• Proficient in Microsoft Office (Excel, PowerPoint and Words)

Company Overview

Founded in 1951, Kulicke and Soffa Industries, Inc. (NASDAQ: KLIC) specialize in developing cutting-edge semiconductor and electronics assembly solutions enabling a smarter and more sustainable future. Ever-growing range of products and services supports growth and facilitates technology transitions across large-scale markets.

Please refer to the website for more details: www.kns.com.

Equal Opportunity

Kulicke & Soffa recruits on the basis of merit (such as skills, experience or ability to perform the job), regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Job Responsibilities

· Technical Support:Provide on-site technical support to customers, including troubleshooting, diagnostics, and repairs of hardware and software issues.

· Installation and Configuration: Install, configure, and test new hardware and software systems according to customer requirements.

· System Maintenance:Perform regular maintenance and updates on customer systems to ensure optimal performance and reliability.

· Customer Training:Train customers on how to use and maintain their systems effectively, including providing documentation and hands-on guidance.

· Issue Resolution:Respond promptly to customer inquiries and resolve issues in a timely manner, ensuring customer satisfaction.

· Documentation:Maintain accurate records of all work performed, including issue logs, service reports, and customer communications.

· Collaboration:Work closely with internal teams, including sales, support, and engineering, to ensure customer needs are met and to escalate issues as necessary.

Requirements:

Degree/Diploma in Computer or Electrical or Electronic Engineering or equivalent
Knowledge of programming in C,C++ are added advantages
Knowledge of embedded electronics fundamentals
Have knowledge of LoRaWAN and related IoT products are added advantages.
Have passion for exploratory testing and test automation are added advantages.
Able to work independently within tight schedule with positive disposition.
Excellent knowledge on Microsoft Office (Words, Excel & Powerpoint)
Fluent of English and Chinese in both speaking and writing

Job Summary

We seek an experienced and motivated Senior Software Quality Engineer to join our forward-thinking tech team. In this role, you'll ensure our platform is reliable and meets high-quality standards. This position allows you to work across teams, shaping and implementing advanced QA processes that support scalable, reliable, and innovative solutions.

Responsibilities:

Test Strategy and Planning

- Define and lead comprehensive QA strategies, covering all phases of the software development lifecycle.

- Develop, manage, and execute manual and automated test plans, cases, and scripts to ensure thorough testing.

Automation and Tooling

- Lead the development of automated testing frameworks using Cypress, Playwright or any automation tool for end-to-end test coverage.

- Drive platform scalability by implementing performance and load tests using tools like Gatling, K6, or Jmeter.

Quality Assurance

- Perform contract testing to ensure smooth interaction between microservices.

- Lead regression testing efforts for bug fixes and new features to maintain overall quality.

- Oversee the end-to-end testing pipeline, resolving issues promptly to avoid any delays.

Cross-Functional Collaboration

- Work closely with product managers, developers, and DevOps engineers to meet project requirements and deliver high-quality software.

- Contribute to agile team processes, including sprint planning and other ceremonies, with valuable QA insights.

- Coordinate with QE teammates to prepare and lead weekly deployments, ensuring smooth execution.

Issue Resolution and Reporting

- Accurately document, track, and report software defects, conducting root cause analysis as needed.

- Provide timely and detailed reports on QA activities, testing outcomes, and relevant quality metrics.

Mentorship and Leadership

- Mentor junior QA engineers, building a strong team culture focused on quality and continuous improvement.

- Stay up-to-date with emerging QA tools and methods, bringing new ideas to the team.

Job Requirements :

- Expertise in software quality assurance, with a strong focus on automation testing (e.g., Cypress, Playwright).

- Demonstrated experience with performance testing tools such as Gatling and Autocannon.

- Proficient in JavaScript (TypeScript) or Java

- Familiar with frontend and backend technologies (e.g., ReactJS, ExpressJS, Gin-gonic), as well as cloud platforms (AWS, Docker, Kubernetes).

- Knowledgeable in CI/CD tools (e.g., GitLab, ArgoCD) and relational databases (MySQL, PostgreSQL).

- Solid understanding of REST and GraphQL APIs, JWT for authentication, and search technologies like Elasticsearch.

- Exposure to additional testing tools and caching systems like Redis.

- Experience with logging and monitoring platforms such as Splunk or OpenSearch

Qualifications:

- Bachelor’s degree

- Strong problem-solving, analytical, and communication skills.

- Demonstrated leadership skills and comfort working in a fast-paced, agile environment.

*Join Our Team: Outdoor Service Engineer*

Are you a tech-savvy problem solver with a passion for the great outdoors? AV Media Pte Ltd is seeking an enthusiastic and skilled Outdoor Service Engineer to join our dynamic team.

*About Us:*

AV Media Pte Ltd is a leading provider of audiovisual solutions, serving prestigious clients including MOE schools and various government agencies. We pride ourselves on delivering top-notch services and innovative solutions.

*Position: Outdoor Service Engineer*

*Key Responsibilities:*

- Provide maintenance and support for audiovisual equipment at client locations.

- Troubleshoot and resolve technical issues efficiently and effectively.

- Ensure customer satisfaction by delivering excellent service.

- Collaborate with the team to improve service quality.

*Requirements:*

- Technical diploma or equivalent in a related field.

- Experience in audiovisual equipment maintenance and troubleshooting.

- Strong problem-solving skills and attention to detail.

- Excellent communication and interpersonal skills.

- Ability to work independently and manage time effectively.

- Valid driver's license.

*Benefits:*

- 5-day work week.

- Company-provided vehicle for service visits.

- Comprehensive training program.

- Attractive salary and benefits package.

- Opportunity to work with prestigious clients and advance your career.

*How to Apply:*

If you’re ready to take on an exciting challenge and be part of a forward-thinking company, send your resume and a cover letter to [email protected] with the subject line "Application for Outdoor Service Engineer."

Join us in making a difference through cutting-edge audiovisual solutions!

Roles & Responsibilities:

• Establishing work procedures, instructions and monitor performance and control of workmanship towards quality.
• Ensure sub-contractors and suppliers comply with project’s QA/QC requirement and manage project quality to ensure compliance to codes, standards and regulations.
• Carry out audit processes, review procedures, and ensure compliance with industry standards.
• Carry out various inspections and tests on the materials, products and components during various stages and completion of construction.
• Identify areas for process improvements, implement best practices and ensuring ongoing compliance.
• Maintain records of inspection results, deviations and corrective actions taken to ensure traceability and accountability.
• Initiate corrective actions to resolve the issue and prevent recurrence when defects or non-conformities are found.
• Review client’s complaints relating to QA/QC matters.
• Preparing and maintaining detailed reports on quality performance.

Requirements:

• ITE / Diploma in engineering or equivalent.
• At least 5 years of working experience in the local construction industry.
• Good communication and interpersonal skills.

The Web Development Engineer will be responsible for the design, development, and maintenance of web applications. This role requires a strong understanding of web technologies, programming languages, and software development methodologies. The ideal candidate will be a passionate developer with a keen eye for detail and a commitment to delivering high-quality code.

Responsibilities:

• Front-end Development:Develop user-friendly and responsive web interfaces using HTML, CSS, and JavaScript.
  Utilize front-end frameworks (React, Angular, Vue.js) to build efficient and scalable applications.
  Optimize website performance and user experience.
  
• Back-end Development:Develop server-side logic and APIs using programming languages like Python, Ruby, or Node.js.
  Integrate with databases (MySQL, PostgreSQL, MongoDB) to store and retrieve data.
  Implement security measures to protect web applications from vulnerabilities.
  
• Full-Stack Development:Work on both front-end and back-end development to deliver end-to-end solutions.
  Collaborate with designers and other developers to create seamless user experiences.
  
• Testing and Debugging:Write unit and integration tests to ensure code quality and functionality.
  Debug and troubleshoot issues to maintain application stability.
  Conduct performance testing to identify and optimize bottlenecks.
  
• Deployment and Maintenance:Deploy web applications to production environments using deployment tools and processes.
  Monitor application performance and address any issues that arise.
  Implement regular updates and security patches.
  

Pre-Requisites :

• Bachelor's degree in Computer Science, Electrical Engineering, or a related field.
• 4+ years of experience in web development.
• Strong proficiency in HTML, CSS, and JavaScript.
• Experience with front-end frameworks (React, Angular, Vue.js) and back-end languages (Python, Ruby, Node.js).
• Knowledge of database technologies (MySQL, PostgreSQL, MongoDB).
• Understanding of web servers (Apache, Nginx) and application servers.
• Experience with version control systems (Git).
• Strong problem-solving and debugging skills.
• Ability to work independently and as part of a team.

Preferred Qualifications:

• Experience with cloud platforms (AWS, Azure, GCP).
• Knowledge of DevOps practices and tools (Jenkins, Docker, Kubernetes).
• Experience with testing frameworks (Jest, Mocha, Chai).
• Understanding of web security best practices.

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

- Excellent written and oral communication skills in both English and Mandarin.

We regret that only the shortlisted candidates will be notified

- Manage and supervise the construction work activities.

- Monitor work progress and project schedule and timeline.

- Design of electrical systems for nursing home projects.

- Conducting technical feasibility study, life cycle study and planning for all electrical systems.

- Preparation of design report, calculation, drawings, specification, cost estimation, method statement and details/ schedules for projects.

- Assist Project Manager in up-keeping the project ISO quality documentation and records.

- Evaluation of tenders and preparation of tender assessment reports.

- Assist Professional Engineer in liaison preparation and follow up of authority submissions with the respective government agencies.

- Responsible on testing and inspection work of electrical.

- Report to the superior on a daily/weekly basis on the progress of site work.

- Ad-hoc & other duties as assigned by the superior.

Job Requirements:

- Bachelors Degree in Electrical Engineering.
(Universities recognized by PE Board is an added advantage)

- Electrical engineering background is an advantage.

- Have more than 3 year of hands-on design experience in building and/or infrastructure projects.

- Good working knowledge of relevant legislation, regulations, codes of practice, and guidelines.

- Team player and able to work independent with minimal supervision.

- Proficient in AutoCAD and BIM.

- Able to work on construction/outdoor conditions.

- Being able to start work immediately would be an advantage.

- Good project management and technical skills.

- Excellent written and oral communication skills in both English and Mandarin.

We regret that only the shortlisted candidates will be notified

Responsibilities

• Internal and external excursion management (MRB / Quality Claims)
• Customer data reporting
• Conduct Quality related training
• Support customer survey and audits
• Continuous improvement activities

Requirements

• Bachelor's degree in Engineering or Science.
• Strong systematic and analytical problem-solving abilities.
• Proactive attitude with the ability to handle multiple tasks simultaneously.
• Excellent communication skills and a collaborative team player.
• Understanding of system flow and databases; basic SQL knowledge is advantageous.
  

For Experienced Candidates:

• Proven experience with QA tools such as 8D, FMEA, fishbone diagrams, and AND.
• Solid working knowledge of Statistical Process Control (SPC) and auditing practices.

For Entry-Level Candidates:

• Willingness to learn and adapt to new QA tools and methodologies.
• Basic understanding of quality assurance principles and practices.
• Freshgraduate with part time working experience during Uni time (aside from internship) is a plus.

Main Responsibilities

• Reports to the Principal Engineer (Electrical).

Design & Solutioning

• ­ Support/participate in engineering design for integration and system development HVAC electro-mechanical systems.
• ­ Prepare, or supervise the preparation of, drawings for HVAC plant system general arrangements, power single line diagrams, cable block diagrams, instrumentation loop diagrams, P&IDs, control system architecture drawings, and cable, instrument and I/O schedules at detailed design level.
• ­ Drafting of panel layout, schematic and control drawing of starter and PLC panel.
• ­ Develop and release of engineering component and assembly drawings.

Projects & Operations

• ­ Support schedule development for key project timelines/milestones.
• ­ Participate Factory Acceptance Test (FAT) of starters and PLC panels.
• ­Conduct testing and commissioning for projects.
• Attend to ad-hoc electrical issues at maintenance sites for troubleshooting and provide recommendations.
• Contractor liaison, engagement/provide requirements.
• ­Supervision: Oversee engineers/subcontractors to generate detailed drawings, compile reports.
• Perform review/analysis, perform diagnostics and troubleshooting of electrical issues.

• Evaluate / review selection of electrical subcontractors.
• Review testing and certification reports.
• Quality Assurance: Complete electrical quality assurance tasks and equipment inspection.
• Training: Assist with recruitment, training, and onboarding of new hires.
• Safety and Compliance: Ensure a safe work environment and compliance with relevant standards.

Qualifications and experience

• Education: Diploma/Degree in Engineering/Facility Management
• Experience: >10 years project/facility management, factory plant operations.
• ­In-depth knowledge in panel design, layout arrangement of starter panel and PLC panel.
• ­In-depth knowledge on HVAC systems and HVAC(ACMV) controls, VFD, Start-Delta and Auto Transformer starters.
• Knowledge on HVAC systems, facility, safety and construction regulations with respect to chiller system installation would be an advantage.
• Skills: Strong problem-solving, analytical, and organizational skills. Proficiency with CAD software and excellent communication abilities.
• Certifications: Well versed in Singapore CP and Standards for panel design and electrical discipline.
• Required fluency in English; And/or Mandarin/Cantonese, other Asian languages would be beneficial e.g. Korean/Bahasa/Thai etc.).

Key Qualities

• Leadership: Demonstrate strong leadership and motivational skills.
• Interpersonal Skills: Excellent negotiation and communication skills to establish relationships with clients, vendors, and suppliers.
• Adaptability: Ability to multitask and adapt to new challenges and technologies.

ETH Zurich is one of the leading universities of the world with a strong focus on science and engineering. In 2010 it established the Singapore-ETH Centre (SEC) in collaboration with the National Research Foundation (NRF) to do interdisciplinary research on pressing problems.

The Singapore-ETH Centre is home to a community of doctoral, postdoctoral and professorial researchers working in three main programmes: Future Cities Laboratory, Future Resilient Systems, and Future Health Technologies. The centre provides a multicultural and interdisciplinary environment to researchers working on diverse themes, with the shared vision of translating research to practical solutions for more sustainable and liveable cities, resilient physical and social urban systems, and patient-centric healthcare systems.

Project Background

SEC is leading the interdisciplinary Cooling Singapore 2.0 project. The project is dedicated to reducing the urban heat island and improving the outdoor thermal comfort in Singapore. The project has develop a Digital Urban Climate Twin (DUCT) for Singapore. This includes development, deployment and operations of the necessary technical infrastructure and integration of a variety of computational models for anthropogenic heat emissions and urban climate simulations. The project is entering its final phase where is testing and transferring the DUCT to external stake holders.

Task/Job description

We are looking for a talented individual to join our interdisciplinary and international team based at the Singapore ETH-Centre.

Your key responsibilities are:

- Model and simulate the impact of district energy systems (with a special focus on cooling technologies) to urban warming in Singapore.

- Test the Energy system models to fine tune their performance in side the DUCT and de-bug when needed.

- Scenario testing. Carry a sensitivity analysis of the Energy model to understand its performance.

- Integrate these optimization algorithms into the Digital Urban Climate Twin platform.

Requirements

You should have:

- Master’s or PhD degree in Operations Research, Energy Systems, Process engineering, Civil engineering, Mechanical engineering or equivalent experience.

- A good command of scripting and data analysis languages (Python, Matlab, R) is preferred.

- Experience working with model-based energy and/or building systems design is a plus.

- Experience running and testing the energy model City Energy Analyst is a plus.

- Experience working in interdisciplinary teams.

- Excellent presentation and communication skills.

- Competency to execute excellent independent work and engage with external stakeholders.

Information about the application process and contact for applicants

Do not hesitate to contact us if you have any questions at [email protected]

We look forward to receiving your online application with the following documents:

• Curriculum vitae,
• A copy or reference to three of your top publications (if any), and
• Names of two references.

Please note that we exclusively accept applications submitted through our online application portal. Applications via email or postal services will not be considered.

Further information can be found on our website: https://sec.ethz.ch/research/cs.html

The Singapore-ETH Centre is an equal opportunity and family-friendly employer. All candidates will be evaluated on their merits and qualifications, without regards to gender, race, age or religion.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on improving tool performance and availability, in charge of maintenance, diagnosing failures and implementing effective solutions to meet uptime and cycle time requirements in the Wet Etch module.

Key Responsibilities

• Maintain equipment performance in cleanroom environment for quality production.
• Handle on-duty tasks and conduct fundamental alarm troubleshooting; identify root cause and problem-solve critical equipment issues with urgency
• Install and qualify new tool sets on schedule to increase capacity promptly
• Continually improve tool uptime availability, drive defect reduction and enhance hardware capability
• Develop defense and monitoring system to prevent equipment failure or performance lost.
• Analyze complex data sets and derive actionable insights to optimize equipment parameters and controls
• Actively collaborate with equipment suppliers and partners to identify tool deficiencies; develop, evaluate, and validate corrective and preventive solutions

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 2 years of experience as a Wet Etch equipment engineer, possessing in-depth knowledge. Experience working in a 12” fab would be advantageous
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Lead Mechanical Engineering

Mechanics- CRAFTMANSHIP - Project execution - COOPERATION

The Most Desired Audio Brand

At Bang & Olufsen, we strive to be the most desired audio brand in the world. For more than 95 years, we’ve developed products that change moods, inspire minds, and instill pride in all of us. We are passionate innovators, using our deep knowledge and collaboration skills to solve and simplify complex challenges every day, each of us driven by the profound effect sound can have on the mind. We welcome others that share our passion.

Join us to use your mechanical expertise to create the next iconic wearable Bang and Olufsen product. Here you get to participate in project teams where you in unison with expert colleagues and Partners, drive mechanical architecture and engineering.

Your mission

As our new mechanical engineer for wearable products, you will join our Project development department as part of the global Mechanical engineering team. Here you will drive NPI projects as Sr. Lead mechanical engineer and expert for earphone & headphone program.

Working alongside concept creators, hardware and acoustics specialists, you will create new and exciting products based on Concept and Business briefs. Joining various project teams, you will:

• Acting as lead for the mechanical design creation process, throughout complete NPI phase.
• Master concept and architecture engineering, providing mechanical engineering and knowhow.
• Make assessments and recommendations e.g., on material and process choices based on mechanical design principles, supporting design for perfection, longevity and magical elements.
• Create mechanical constructions and make proof of concept by rapid prototyping & simulations.
• Cooperate with suppliers for exploration and product development, transforming proven concept and architecture into product requirements.
• Work closely with Quality organization and Partners to ensure product and process validation.

Your network

You will become a part of the global mechanical team. We are a very dynamic team that approach our tasks with vigor and technical curiosity as we are all proud engineers loving our products and exist to create amazing products.

We are an experienced team, and you bring a lot of experience and join a very inspiring environment. Here you will have room to grow and the opportunity to bring your ideas and passion for mechanical design and development into play.

Your location

You will be working out from our office in Singapore. Working closely with your colleagues in a global setting and suppliers in Europe, China and other parts of Asia, you should also expect there to be some travel activity.

Education & Experiences

A passion for mechanical engineering & creation. You have a well-founded and deep understanding of mechanical architecture, design, manufacturing processes and material characteristics. Experiences of leading suppliers and have the capability to transform proven architecture into product requirements.

Moreover, you bring:

• Degree or master’s in mechanical design, Engineering
• 10+ years of experiences in R&D or product development
• Design experiences in audio, wearable products, hearing aids devices an advantage
• 3D CAD design SW such as Creo Parametric
• Capable of Architecture design with good understand of GD&T, simulation
• An understanding of the different tooling processes for different material such as plastic, silicon, aluminium, steel, glass and wood
• An open mind, technical curiosity, and attention to detail
• Good communication skills in English. Fluent in Mandarin a plus.

Ready to join the most desired audio brand in the world?

Then send your CV and application by pressing the apply bottom above. Applications are assessed continuously, so please apply as soon as possible and no later than 31st January 2025.

Read more about our recruitment process and explore your career opportunities within Bang & Olufsen, https://www.bang-olufsen.com/en/corporate/careers

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a ISEP Senior Engineer to be part of our Facilities Department diverse team of talent. You will be responsible to provide support pertaining to Environmental, Health and Safety to wafer fabrication for the company

What you will be working on:

• Familiar with WSH Act, Fire Safety Act and ISO 45001, ISO14001, SS651 so as to ensure compliance to these requirements, including Statutory Equipment & Licenses.
• Ensure that the EHS Management Systems are implemented, maintained, and compliant with all applicable local legislation.
• Ensure safety case implementation and mitigative measures for Safety-Critical Events (SCE) in Major Hazard Industries (MHI).
• Develop, maintain, and periodically test emergency response plans, conduct CERT audits, and lead emergency drills including training, maintain procedure and implement all the requirement.
• Compliance with regulatory and permit/ licenses requirements, through Monitoring & Measurement and standard, work to ensure proper management and accurate reporting.
• Implement of EHS programs to improve awareness and performance towards established goals actively.
• Manage EHS incidents and non-conformance investigations, ensuring corrective and preventive actions are tracked and closed.
• Schedule and coordinate EHS related meeting, inspection and audit (External / Internal)
• Manage, schedule and coordinate EHS trainings including training and revision of training materials.
• Manage EHS reports, EHS bulletin/Alerts Manage and other communications
• Revise and write EHS procedures and work instructions.
• Manage work permit system and contractors management.
• Any other duties as assigned by Manager

More about you:

• Minimum Diploma / Bachelor in Science or Engineering in Environmental, Chemical or equivalent
• Familiar with local regulatory requirements related to workplace safety and health, and all other aspects of safety.
• Strong understanding of chemical safety regulations, ISO45001, ISO14001 and SS651
• Certificates in EHS Internal Auditing (ISO 45001, ISO 14001, SS651) will be significantly advantageous
• Registered Workplace Safety and Health Officer and Fire Safety Manager

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

Job Description:

• Ensure the quality of all construction work performed on site are in accordance with the company's QAQC requirement.
• Visit project sites, arrange and conduct QAQC inspections on mainly Structural Works and Architectural Works.
• Assist project teams on the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards.
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practises.
• Ensure that all project quality records and quality audit plans are maintained.
• Any other duties as assigned.

Job Requirement:

• Candidate must possess Bachelor Degree or Diploma in relevant discipline.
• Minimum 3 years of experience in construction/ civil engineering industry.
• Able to read and understand CAD, Revit/Navisworks software services in 3D model is essential.
• Have experiences in working in large scale projects.

Assist with infrastructure planning and design

• Assist with the planning and design of infrastructure systems
• Assist with the documentation of infrastructure design and planning activities and decisions

Support infrastructure operations

• Perform infrastructure operations activities such as installations of infrastructure systems according to design specifications
• Align infrastructure operations with agreed service agreement standards

Maintain infrastructure

• Perform activities related to ongoing maintenance of infrastructure
• Assist with the implementation of agreed infrastructure changes and maintenance routines

Optimise infrastructure performance

• Perform ongoing tuning and optimisation of infrastructure hardware and software components such as updates and upgrades
• Participate in infrastructure development activities
• Assist with infrastructure testing and implementation
• Gather performance and data usage statistics for capacity planning and reporting
• Assist with piloting of new tools, technologies, and/or processes

Resolve incidents

• Perform problem/issue identification and resolution
• Assist with simulation of user problems to resolve operating difficulties
• Follow up with users to ensure problem has been resolved
• Recommend system modifications to reduce user problems

Requirements

• At least 6-8 years' of experience in the Network Management and Support Services, Unified Communication, Wirecenter maintenance
• Strong knowledge and experience in supporting Cisco Switch, Cisco Router, Fortigate Firewall, Palo Alto Firewall, ClearPass NAC, F5 VPN, IPS, WLC, Access Point and VSS/VLAN Architectures.
• Network Support in the areas of wireless, wired, VPN
• Network certifications eg CCNE, CCNA

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on creating an engineering plan for land development based on their calculations and any research conducted. They should have experience with AutoCAD and be able to utilize strong design skills in order to create visual aids. By utilizing strong organizational and communication skills, this candidate will also have the ability to execute a project based on the criteria outlined.

Key Responsibilities

• Take charge of facility CIVIL&MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management CIVIL&MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Civil Engineering or a related STEM field.
• More than 5 years of construction project management experience, including 300mm semi-conductor Fabrication plant construction experience.
• Good written and verbal communication skills in English
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Key Responsibilities

• Take charge of facility MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Mechanical Engineering or related field.
• 300mm fab facility mechanical system operating experience, especially Exhaust / Chiller / PCW & Clean Room Systems.
• Good written and verbal communication skills in English.
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

• Renowned Bookstore
• Basic Salary: $3000 - 3500
• Full Benefits (AWS + Staff Discount)
• 5 day (Office Hours)
• Location: Serangoon

Responsibilities:

• Positions available for English Books or Gadgets / IT.
• Manage allocated product categories.
• Source and purchase new products.
• Analyse merchandising costs and support negotiations with business partners.
• Monitor inventory, replenishment, and stock aging.
• Communicate potential issues impacting business operations.

Requirements:

• Diploma in Business or related.
• Min. 1 year of relevant Purchasing / Merchandising experience.
• Knowledge of Books, Home Appliances, IT, and Furnishings products will be a plus.
• Proficiency in MS Excel and Office.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

Job Description:

A Singapore based precision optical company is looking for dedicated sales engineer who is fast learner, enthusiastic in sales and customer services

Job Responsibilities:

- Identify and develop new business accounts

- Establish good working relationships with customers and partners

- Follow-up and manage customers enquiries and order shipments

- Recommend suitable products and solutions to the customers

- Provide monthly sales update to the management

- Evaluate new potential products for customer

- Manage with system set up, paperwork, commissioning and ensure that delivered system performance is within specifications

- Attend local or overseas events, conferences and exhibitions

Job Requirements

- Diploma or Degree in Engineering (EEE; Electronic, Mechanics; Biomedical etc.) related discipline

- 2 years of sales experience in optics, laser, spectroscopy, and photonics is preferred.

- Fresh graduates who are keen to explore industrial sales or with engineering background are also welcome to apply

- Be keen on business travelling

- Self-driven and motivated team player

- Good presentation and communication skills with willingness to learn