• Request quotation and price negotiation with suppliers.
• Prepare purchase order, ensure timely delivery and follow through the complete procurement cycle.
• Responsible for construction material / machinery purchase and to maintain with proper record for receipts and issuance.
• Matching of supplier’s invoices with supporting documents such as PO & DO.
• Generate monthly purchasing report for management.
• Liaise with local and overseas suppliers.
• Administrative tasks on and ad-hoc basis.
• Take sufficient steps to minimize project risks.
• Handle the planning and preparation of company contracts.
• Liaise with and support the Project Manager to ensure the project is executed safely and properly.
• Ensure compliance with the company’s work health and safety policies, standards and procedures.
• Prepare monthly project reports and make presentations at meetings.
• Support negotiations of claims, manage contractual changes and resolve disputes or conflict resolution with Contractors.
• Assess and prepare claims from suppliers.
• Ensure project members use the contract correctly.
• English speaking, writing, and reading required.
• Candidate must possess at least Secondary School/O Level, Higher Secondary/Pre-U/'A' Level, Diploma, Advanced/Higher/Graduate Diploma Understanding of procurement process, Good Communication Skills

Job Title: Site Engineer (Electrical) (ID5084)
Location: Paya Lebar / On site
Working Hours: Mon to Fri 8am - 5pm, Sat 8am – 4pm
Salary: $2800 - $4000

Job Description:
• Capable of reading electrical and ELV drawing schematic diagram drawing.
• To coordinate and liaise with Client/Sub-Contractor on project and maintenance related matters to ensure to smooth execution of site work.
• Able to review and understand contract specification, prepare and submit variation order as according to the requirement.
• Able to perform engineering design, load and fault calculation.
• Able to resolve technical issues related to installation, commissioning and testing.
• Ensure the installation works are done according to the approved shop drawing, method statement, project specifications and relevant standards.
• Attend regular site meetings with Client/Sub-Contractor to discuss and resolve the site matters.
• To assist Project/Site/Construction Manager on in handling and monitoring the project progress.

Requirement:
• ITE/Diploma/Degree or equivalent in Electrical Engineering.
• Experience in project management handling for industrial or commercial purpose.
• Experience in MRT Project is a bonus.
• Knowledge in designing phases or street lighting works related is a bonus.
• A team player and possess problem-solving, coordination and management skills.

Product area

Google Cloud accelerates every organization’s ability to digitally transform its business and industry. We deliver enterprise-grade solutions that leverage Google’s cutting-edge technology, and tools that help developers build more sustainably. Customers in more than 200 countries and territories turn to Google Cloud as their trusted partner to enable growth and solve their most critical business problems.

Job description

When leading companies choose Google Cloud, it's a huge win for spreading the power of cloud computing globally. Once educational institutions, government agencies, and other businesses sign on to use Google Cloud products, you come in to facilitate making their work more productive, mobile, and collaborative. You listen and deliver what is most helpful for the customer. You assist fellow sales Googlers by problem-solving key technical issues for our customers. You liaise with the product marketing management and engineering teams to stay on top of industry trends and devise enhancements to Google Cloud products.

Additional job description

The Asia Pacific (APAC) Solutions Prototyping Team partners with customers to bring their goals to life. We collaborate to understand tests and ideas, then design and build practical working prototypes using data, analytics, AI, and software engineering. Our goal is to demonstrate how these technologies can work together to achieve impactful business results.

In this role, you will lead the design and development of prototypes, demonstrating the transformative power of data, analytics, AI, and software engineering to solve business tests for customers. You will mentor team members and contribute to the direction of our prototyping efforts.

Qualifications

Job responsibilities

• Lead the design, development, and iterative refinement of data-centric and Artificial Intelligence (AI) powered prototypes on Google Cloud Platform (GCP), showcasing the potential of data and AI to address specific business needs.
• Collaborate with customers to understand their business tests, technical requirements, and objectives. Build relationships with customers and stakeholders.
• Mentor and guide junior team members, fostering a culture of innovation and learning.
• Contribute to the development of internal best practices and methodologies for data and AI-motivated solutions.
• Stay up-to-date with emerging trends and technologies in cloud computing, data science and AI/ML, and identify opportunities for their application in prototyping projects.

Minimum qualifications

• Bachelor's degree in Computer Science, a related technical field, or equivalent practical experience.
• 10 years of experience in cloud computing, with a focus on Artificial Intelligence/Machine Learning (AI/ML), data analytics, and data engineering.
• Experience with modern application development and Developer Operations (DevOps) practices, including Continuous Integration/Continuous Deployment (CI/CD), containerization (Docker, Kubernetes), and infrastructure-as-code.
• Experience in programming languages such as Python with developing and deploying Generative Artificial Intelligence (GenAI) models and applications.
• Experience with data analysis, data engineering, database technologies (SQL, NoSQL), and data warehousing solutions.
• Ability to analyze business problems and develop technical solutions.

Preferred qualifications

• 10 years of experience in cloud computing, with AI/ML, data analytics, and data engineering, in a customer-facing or consulting role.
• Experience in architecting and developing software or infrastructure for scalable, distributed systems, particularly those related to AI/ML workloads.
• Experience in understanding customer requirements and designing technical architectures to meet needs.
• Experience in building prototypes and proof-of-concepts to demonstrate solutions.
• Experience in managing stakeholder expectations and building consensus around technical projects.
• Knowledge of cloud services related to AI/ML, data analytics, and data engineering.

Mission Summary:

We are actively seeking an exceptional Computer Vision / Machine Learning (CV/ML) Software Engineer to design and develop cutting-edge systems and software for our current and future autonomous driving efforts. As a member of the Localization, Mapping and Calibration (LMC) organization, you will play a critical role in architecting and developing automated semantic annotations and map change detection. This is an exciting opportunity to have a direct impact on the company’s goals by solving technical problems which allow us to scale production maps to meet the needs of commercial operations.

What You'll Be Doing

• Design and implement automated semantic mapping solutions from ground up, taking ownership of complex challenges.
• Work with point cloud, image, and other sensor data to aid in semantic mapping by applying state-of-the-art methods and techniques.
• Develop and deploy scalable and efficient software in the cloud.
• Collaborate with internal teams that focus on HD mapping and CV/ML models (e.g. SLAM, segmentation networks, object detection networks) to improve our semantic maps.
• Understand how the maps are consumed and design metrics and tools to evaluate and validate our automated annotations
• Prioritize safety above all else in designing and implementing software solutions, ensuring the highest standards of safety in our autonomous driving efforts.

What We're Looking For

• Masters or PhD in Computer Engineering, Computer Science, Electrical Engineering, Robotics or a related field.
• 3+ years of experience shipping production software in robotics / graphics / mapping which cover topics in SLAM, geometric computer vision, point cloud processing and/or scene reconstruction.
• Strong C++ or Python software engineering and algorithm skills including software design, source control management, build processes, code reviews, testing methods.
• Deep understanding of CV/ML techniques, particularly integrating ML modules in production.
• Ability to communicate and collaborate across multiple teams, researchers and engineers.
• Strong problem-solving skills and ability to learn.

Bonus Points (not required)

• Experience with large-scale data processing and backend distributed systems.
• Experience in cloud technologies and building/maintaining a cloud service and databases is desired

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NiTEC or Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Job Title: QC Engineer (ID5080)
Location: Serangoon
Working Hours: Mon to Fri 8.30am - 6pm
Salary: $3200 to $4500

Job Description:
• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Requirement:
• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• 1-2 years of experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Benefits:

• Basic Salary up to $2,500 with yearly increment based on performance.
• 5 Days Work Week (8.30 am to 5.30 pm)
• $100 Transport & Utility Allowance
• Annual leave up to 10 days for first year
• Entry level are welcome and on job training provided

Job Description:

This is a contract role for an Assistant Engineer located in Ang Mo Kio. Our client is a Japanese multinational engineering, electrical equipment and electronics corporation headquartered in Tokyo, Japan. You will involves performing data entry tasks, such as inputting and uploading data into Excel and the authorities' management system. This includes conducting periodic checks on the management system, summarizing the situation, and creating necessary documents for collection..

Qualifications:

• ITE in Electrical/Electronic Engineering or years of equivalent technical knowledge
• Basic knowledge operation system like Windows, Linux

Key Responsibilities:

• Develop hardware for switched-mode power supplies and battery chargers.
• Perform topology selection, circuit design, component selection, and power loss calculations based on customer specifications.
• Design schematic and PCB layout based on product design.
• Craft test and verification plan to ensure product design can comply with customer requirements.
• Ensure the product can meet safety and certification requirements.
• Resolve issues with design promptly based on customer and internal feedback.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders to ensure successful delivery of the product.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, PhD, or researcher with Min. 3 years experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Experience designing CC/CV charger systems and working on power supplies with power levels >500W.
• Working experience in schematic design and PCB layout software, e.g. OrCAD, PADS, or other equivalent software
• Familiar with simulation tools, e.g. LTspice, PSIM, or other equivalent software
• Acquainted with test equipment such as AC/DC source, electronic load, oscilloscope, and soldering iron.
• Candidates with the below skillsets will be an added advantage.

1. Experience in volume manufacturing.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Summary

This position is accountable for preparing the detailed Construction plans in accordance with the JGCAP’s company policies as the key person under the direction by JGCAP’s Site In-charge/ Project Manager and coordinating all construction activities on site among all JGCAP’s disciplines including subcontractors using his technical experiences and construction know-how and ensuring the completion of the work on schedule.

The detail plans as described above are as follows:

• Execution formation with the direction by JGCAP’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with JGCAP’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the JGCAP’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 4 years’ relevant experience in construction management field.
• Candidate with vast experience is also encouraged to apply.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Interested parties, please send in your detailed resume.

Responsibilities

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

How to Apply:

Interested applicants, kindly click on “APPLY NOW”

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Pang Seng Leng Diana

EA Personnel Reg No: R1106651

• Position : Project Engineer (A&A Construction) - Up to $6,500 + Bonus
• Office Location : East - Aljunied
• Working hours : 5.5 days - Monday to Friday | 8am to 6pm | Saturday 8am to 12pm
• Salary (commensurate with experience) : Up to $6,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Building Construction

Main Responsibilities:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued.
• Prepare method of statement and work procedure
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied
• Oversee drawing management and control of technical documentation
• Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage.
• Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order
• Organize labor, equipment and material for day to day site activities
• Carry out material receiving inspection and maintaining material record.
• Prepare daily and monthly progress report, perform and maintain inspection record.
• Any other duties assigned

Requirements:

• Minimum of Degree in Architectural/ Building / Construction Management or related; with at least 3-5 years of experience.
• Great team player with pro-active attitude.
• Bilingual in English and Mandarin to liaise with Mandarin speaking associates

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Primary Objectives of Position

• Lead a team of senior / technicians to carry out scheduled Preventive Maintenance and Corrective Maintenance together on passenger trains/engineering vehicles/light rail vehicles/component/equipment as assigned by supervisor.
• Ensure the team comply with all PM & CM works and related tasks with approved work instructions, quality procedures, safety and operational procedures, and good maintenance standards.
• Plan and coordinate within the team and other teams to complete the assigned maintenance tasks within the established standard time.
• Ensure the team has the necessary qualifications and authorization to carry out daily tasks and any assigned tasks by supervisor.
• Responsible for the safety, welfare and discipline of the team.
• Responsible for the upkeep of the team equipment/tools and working environment

Major Responsibilities

• Responsible for team's quality and standards of the PM/CM works within the established standard time and be competent to carry out preventive and corrective maintenance tasks within the established standard time in accordance to work instructions and related documents, as assigned by supervisors.
• Exercise safety always, in accordance to established safety procedures.
• Responsible for the safety of self and all co-workers, inclusive of contractors.
• Demonstrate sufficient ability in diagnostic and troubleshooting electromechanical systems.
• Forecast and plan his team and resources to complete maintenance tasks and assigned tasks timely.
• Perform supporting maintenance activities such as Train Driver/Shunter, overhead crane operator, forklift driver, etc. as authorized and required by the supervisor.
• Able to work on a shift roster system in accordance with the MOM guidelines and the Collective Agreement.
• Undertake any other tasks or functions that are incidental or ancillary to the performance of the works assigned by supervisor.

*The above activities are no means exhaustive and are subjected to amendment whenever is needed.

Specific Safety Responsibilities

• Undertake daily safety checks on trains and only signs trains off as fit for service after they have been properly checked.
• Carry out repairs on trains in a safe way according to training received and only signs the work off as complete after thorough checks have been carried out.
• Undertake work in accordance with Company Rules and Procedures.
• Remains constantly vigilant for unexpected defects on trains and report them immediately to his Supervisor.

Job Specifications

• Higher Nitec (with Experience) or Diploma in Engineering (Electrical/Electronic/Mechanical/Mechatronic Engineering).
• Minimum 2 years relevant working experience in maintenance/repair/installation of electrical or mechanical equipment.
• Fresh graduate with good academic results will also be considered.
• Experience in railway environment will be an added advantage.
• Must have analytical & fault-finding skills.
• Understand at least two of electrical/electronic/air conditioning/pneumatic/mechanical system.

Attributes

• Good working attitude with strong commitment to job assignments.
• Able to communicate well with staff at all levels.
• Have good initiatives and strong trouble shooting skills.
• Demonstrates strong leadership qualities and is capable of motivating teammates
• Required to work on 3 rotating shift and required to be on 24 hours standby round the clock for any unforeseen emergency recall.

We regret to inform that only shortlisted applicants will be notified.

Remuneration: $3,500 - $4,000

Working Hours: Mon - Fri, 7:30am - 5pm

Key Responsibilities:

• Minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiate, implement, and manage the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes adhere to all Regulatory and Statutory Requirement.
• Establish and prepare process documentation
• Make recommendations for improving plant operations and solving production-related problems.
• Train respective subordinates
• Conduct employee performance reviews based on job descriptions
• Assist in hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.

Job Description:

• Minimum 2 years working experience in manufacturing environment.
• Nitec / Higher Nitec / Diploma in M&E or Mechanical Engineering
• Able to supervise and lead the subordinates.
• Willing to work after working hour or during non-working days.
• Knowledge in ISO would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team

Job Requirements:

• Higher NITEC in Mechanical Engineering.
• Advanced skills using company software
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NiTEC or Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• At least a minimum of 5 years of relevant experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

As a Senior Frontend (Full Stack) Engineer, you will be responsible for designing, developing, and maintaining our data product suite. You will work closely with cross-functional teams including data scientists, data engineers, and UX/UI developers to create scalable, robust, and user-friendly applications. Your expertise in both front-end and back-end development will be crucial in implementing innovative features and ensuring seamless integration between different components of our data products. This role requires strong problemsolving skills, a deep understanding of data processing and visualization techniques, and a passion for delivering high-quality software solutions.

Responsibilities

• Collaborate with product owner, data scientists, data engineers and designers to understand product requirements and translate them into technical specifications.
• Design and develop full-stack solutions, including user interfaces, APIs, data processing and storage.
• Implement data visualization components using modern front-end frameworks and libraries.
• Develop scalable and efficient back-end services to handle data from multiple data source with complex business logic.
• Optimize application performance and ensure high availability and reliability.
• Conduct code reviews, ensure seamless deployment and testing of the data products and provide constructive feedback.
• Stay updated with the latest industry trends and best practices in full-stack development, data engineering, and data visualization.
• Troubleshoot and resolve issues reported by users, ensuring a smooth user experience.
• Continuously improve software development processes and contribute to the overall technical excellence of the team

• Bachelor's or master's degree in Computer Science, Software Engineering, or a related field.
• 5+ years of professional experience as a Full Stack Engineer, with a focus on datadriven applications.
• Strong proficiency in JavaScript, HTML, CSS, and modern front-end frameworks (e.g., React is preferred as we use React in our team).
• Expertise in server-side programming languages such as Node.js, Python or Java.
• In-depth knowledge of databases and SQL, with experience in designing and optimizing data models.
• Familiarity with data processing frameworks (e.g., Apache Spark) and big data technologies (e.g., Kafka) is a plus.
• Solid understanding of RESTful APIs and microservices architecture.
• Experience with cloud platforms (e.g., Azure, AWS) and containerization technologies (e.g., Docker, Kubernetes).
• Proficiency in version control systems (e.g., Git)
• Excellent problem-solving skills and the ability to debug complex issues in a distributed system.
• Strong communication skills and the ability to work effectively in a collaborative team environment.
• Prior experience working on data products or analytics platforms is highly desirable.

Summary:

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering centre serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

You will join the 'Thales Gemalto Digital First' project team to push forward the vision of 'Banking as a Service', combining card digitization, onboarding and risk evaluation platforms all in one for financial institutions to deliver optimized mobile-first experience for their customers.

You will be part of the driving force of our DevSecOps transformation, where we envision multiple teams working together on the same code base allowing full autonomy in solving problems presented by our customers.

Responsibilities:

• Implement solutions using Gitlab as a platform for source code, continuous integration and deployment
• Implement frontend component to provide generic secure services and cloud solution
• Be responsible for development/testing/deployment for the overall solution
• Participate in the design, implementation, maintenance, validation and documentation within a Scrum Team.
• Ensure quality metrics are met in terms of performance, scalability, maintainability, reliability.

Requirements:

• Minimum 5 years of relevant work experience in either JavaScript and TypeScript
• Knowledge on Java, version control system (Mercurial/GIT), build system (Jenkins/GITLAB)
• Familiar with agile methodology (Scrum)
• Understand the concept of DevSecOps
• Motivated self-starter, strong logical, creative problem-solving skills and excellent analytical skills
• Knowledge in Kubernetes, Splunk, DataDog is a plus
• Knowledge in Docker, NoSQL (DynamoDB/MongoDB), MySQL is a plus

Other information:

• Working Location: One North
• Working Hours: Monday - Friday, 9am - 6pm

OUR COMPANY

RegASK is an AI-driven solution enabling end-to-end intelligent regulatory workflow orchestration: automating regulatory intelligence with curated content and actionable insights, smart documentation and a connected community of over 1,700+ subject matter experts for streamlined regulatory execution globally. RegASK augments Regulatory Affairs teams, combining AI efficiency and community-driven intelligence to streamline compliance across the product lifecycle. The RegASK team is highly diverse, with more than 10 nationalities across 3 continents, entrepreneurial and very agile, We are currently recruiting highly motivated individuals to expand its team and support its ambitious growth plans.

If you are a doer who enjoys working across industries and continents, autonomous in your working style, and eager to problem solve, we would love to hear from you.

THE POSITION

Title: Senior Full Stack Engineer

We are seeking a Senior Full Stack Engineer to work closely with the product team in order to translate their requirements and stories to web applications and functionalities in the platform.

In this role, you will benefit from the mentorship of highly skilled experts and you will be working in a fast-paced environment managing multiple projects at once, which involve stakeholders across the company.

Responsibilities:

• Join the product development team to help translate the requirements and designs into web applications or services using Node.js, Express, React, Mongo and other tools/frameworks as required
• Build scalable architectures to meet different use cases
• Work with QA team to create unit and integration tests to ensure code quality
• Weigh in on feasibility and timelines for feature development and development milestones
• Take charge of existing code base and help refactoring to meet standards where required
• Ensure proper and adequate documentation
• Align to the company’s Culture and show great team work abilities

Requirements:

• 8-10 years of experience, building web applications and services
• 3-5 years of experience with MERN stack, Python a plus
• Experience with production grade deployment a plus
• Ability to work collaboratively
• An eye for detail and the ability to develop adaptive code that can keep up with new requirements
• Strong communication skills

If you are excited about this opportunity and believe you have the skills and qualifications to excel as our Senior Full Stack Engineer, please submit your resume for consideration.

We appreciate all applications, but only selected candidates will be contacted for an interview.

Thank you for considering joining the RegASK team. We look forward to reviewing your application!

Job Summary:

We are seeking a highly skilled and motivated medical device Product Development Engineer to join our dynamic team. The successful candidate will be responsible for the design, development, and maintenance of software products that meet regulatory requirements for medical devices. This role requires a good understanding of both software engineering and medical device regulations, ensuring our products are safe, effective, and compliant.

Key Responsibilities:

• Collaborate with software development team to design, develop, and maintain software applications intended for use as medical devices.
• Collaborate with cross-functional teams, including clinical, regulatory, quality, and marketing to implement product requirements and specifications.
• Ensure software design complies with relevant medical device regulations and standards (e.g., IEC 62304, ISO 13485, HSA guidelines).
• Work closely with regulatory affairs to ensure software products meet all necessary regulatory requirements and obtain required certifications and approvals.
• Prepare and maintain documentation required for regulatory submissions and audits.

Qualifications:

• Bachelor’s or Master’s degree in Computer Science, Software Engineering, Biomedical Engineering, or a related field.
• Minimum 2 years of experience in software development, preferably in the medical device industry.
• Experience with regulatory compliance for medical devices.
• Familiarity with software validation and verification processes.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Job Requirements:

• Minimum 5-8 years work experience in related environment
• Experience in ACMV & LTA/SMRT projects would be highly advantageous
• Higher NITEC in Mechanical Engineering
• Advanced skills using company software would be highly advantageous
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Summary:
We are seeking an experienced Software Testing Engineer to join our dynamic team focused on developing cutting-edge medical device software. The successful candidate will be responsible for designing, executing, and maintaining comprehensive testing processes to ensure our software meets the highest standards of quality, safety, and regulatory compliance. This role requires a deep understanding of software testing and compliance.

Key Responsibilities:

• Design, develop, and execute test plans, test cases, and test scripts for software applications intended for use as medical devices.
• Collaborate with software developers and cross-functional teams to identify, document, and resolve software defects.
• Conduct various types of testing, including functional, integration, system, performance, and regression testing, to ensure software quality.
• Prepare and maintain comprehensive testing documentation, including test protocols, validation reports, and traceability matrices, required for regulatory submissions and audits.
• Work closely with quality assurance and regulatory teams to ensure software testing aligns with industry best practices and regulatory requirements.

Qualifications:

• Bachelor’s or Master’s degree in Computer Science, Software Engineering, Biomedical Engineering, or a related field.
• Minimum 2 years of experience in software testing, preferably in the medical device industry.
• Knowledge of software testing tools and frameworks (e.g., Selenium, JUnit, or similar).
• Strong analytical skills with excellent attention to detail.
• Effective communication and teamwork abilities.
• Experience with regulatory compliance and documentation for medical devices will be an advantage but not mandatory.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Position : Service Technician or Engineer-HVAC/ACMV
• Working hours : Monday to Friday | 8.30am to 5.30pm
• Location: Office in Boon Lay-Islandwide
• Salary (commensurate with experience) : Up to $4200 Basic + $50 Transport allowance + $50 mobile + Minimum 2 months Variable Bonus (max up to 5 MONTHS BONUS) + 16 days Annual Leaves + Medical Benefits + Overtime
• Duration : Permanent
• Industry : Refrigerating, Air-conditioning & Ventilation Machinery - MNC

Main responsibilities :

• Able to carry out corrective and preventive maintenance for chillers and related equipment
• To perform chiller overhaul – dismantle & re-assemble the major components
• Coordination with vendors and contractors, ensure all works carried out in accordance with specified quality and EHS standards
• Liaising with customers to resolve the chillers issues
• May be assigned to lead a team of technicians to fulfill jobs assigned – for engineer
• Assist or involve in schedule planning & prepare works related reports – for engineer
• Any other duties as deemed necessary from times to times

Requirement:

• ITE / Diploma in Mechanical, Electrical, Electronic Engineering or equivalent
• Min 2-5 years of relevant experience in Machinery overhaul
• Willing to performing physical activities, such as climbing, lifting, balancing, walking, stooping, and handling of materials.

Email to [email protected]

Do visit Search Personnel Pte Ltd for more job listings.

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.