The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Job Description:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach Engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 5 years of relevant work experience in Diffusion Implant Equipment
• Familiar with all the implant tools: Varian E500, VIISTA900, Axcelis GSD, Axcelis HE/VHE. AMAT XR80.
• An excellent team player with good interpersonal, communication and written skills
• Strong leadership capability to lead and provide guidance to juniors
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Fabrica AI Full time Electrical Engineer - Invention of Automatic Tile Grouting Robots

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your role would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. The following tracks are available:

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. If you like this process, you’d be a good fit for us.

Check out the link above for more information, and send your CV to [email protected]

Job Title: Assistant Engineer (ID1579)
Location: Pioneer, transport pick up Island wide in Singapore and JB Bukit Indah
Working Hours: 4334 days 12 hours shift (Day & Night or Normal) or Normal Shift Mon to Fri 8:30am – 17:30pm
Salary: $2000 - $3000
Benefit: AWS, Variable Bonus

Job Description
• To specialise in processes and to perform higher level of troubleshooting and failure analysis
• Guide the technicians and operators to achieve required output and quality
• To check on the supplementary materials change to ensure they are properly done
• To assist Line Engineer to check all the control chart and checklist
• To ensure smooth production operation with production report
• To monitor, troubleshoot and improve the production daily final test yield
• To perform maintenance and troubleshooting of machinery
• Any other jobs as assigned by Manpower supervisor

Requirement:
• Minimum Diploma Electronics / Mechatronics / Electrical / Mechanical discipline
• Basic operation & manpower control knowledge.
• Basic computer software knowledge such as Microsoft Excel or Words
• Good communication skills.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

About the Centre for Quantum Technologies (CQT)

The Centre for Quantum Technologies (CQT) in Singapore brings together physicists, computer scientists and engineers to do basic research on quantum physics and to build devices based on quantum phenomena. Experts in this new discipline of quantum technologies are applying their discoveries in computing, communications, and sensing.
CQT is hosted by the National University of Singapore. The Centre also has staff at the Agency for Science, Technology and Research, Nanyang Technological University, Singapore, and the Singapore University of Technology and Design. With some 200 staff and students, it offers a friendly and international work environment

Learn more about CQT at www.quantumlah.org

Job Description

The Centre for Quantum Technologies (CQT), National University of Singapore is looking for researchers and engineers to develop next generation quantum computers based on trapped ions. There are multiple positions available at different levels with a diverse set of expertise. This program is funded under the National Quantum Processor Initiative, a flagship program under the National Quantum Office Singapore. The aim of the program is to develop a full stack quantum processor based on Yb-Ba ions. This program brings together the unique capabilities of the existing ion trap groups in CQT expertizing on these two-ion species to explore scalability of the system.

The Centre for Quantum Technologies is a pioneering quantum centre in the world offering a diverse research culture at the intersection of three different fields namely, theoretical, experimental Physics and computer science. We offer competitive salary and enriching intellectual experience in a city state known for its forward outlook. This program also allows strong collaboration with leading academic and industrial groups within and outside the country.

The team members will work to build hardware for the next generation of the ion trap quantum processor. This includes design and implementation of the modular and compact optical system for the laser beam modulation using acousto-optical and electro-optical modulators, delivery of the beams to the inside the vacuum chamber, and implementation of the diffraction limited optical system for ion imaging and addressing of the individual ions with the laser beams.

The successful candidate will be involved in all stages of the development cycle: collaborate with team members to define technical requirements, design, test and integrate the optical systems in the final product.

Job Requirements

We are looking for several optical engineers to join the small team of scientists and engineers working on the next generation of the ion trap quantum processor. The candidate should have:

• Ph.D. in optical engineering, physics or related areas;
• At least 1-2 years of experience in optical design, implementation and testing of the optical or laser systems is preferred.
• Experience in optical design, familiar with optical (for example, Zemax or OSLO) and mechanical (Autodesk or Solidwork) CAD software, able to assemble and test complex optical systems.

Responsibilities

• Responsible for the quality management of machined products to ensure that product quality
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirement

• Minimum Bachelor Degree in Mechanical or Industrial Engineering
• At least 7 years of quality management experience in the machining industry
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.
• Proficiency in English and Chinese, with the ability to communicate effectively with stakeholders in China.

Product area

Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.

Job description

Our thirst for technology is a part of everything we do. The Data Center Engineering team takes the physical design of our data centers into the future. Our lab mirrors a research and development department -- cutting-edge strategies are born, tested and tested again. Along with a team of great minds, you take on complex topics like how we use power or how to run state-of-the-art, environmentally-friendly facilities. You're a visionary who optimizes for efficiencies and never stops seeking improvements -- even small changes that can make a huge impact. You generate ideas, communicate recommendations to senior-level executives and drive implementation alongside facilities technicians.

With your technical expertise, you ensure compliance with codes and standards, develop infrastructure improvements and serve as an expert in your specialty (e.g., cooling, electrical).

Qualifications

Job responsibilities

• Define data center system-level, product architecture, and Research and Development, while helping to develop operations and maintenance procedures for systems/processes.
• Conduct engineering analysis and research designs and methods of data center equipment and facilities.
• Ensure designs and installations meet requirements (e.g., predicted cooling, structural, operational concerns, etc.).
• Serve as Technical Lead in the region. Collaborate with Operations, Execution, and Construction teams to develop new data center (DC) mechanical infrastructure products and systems.

Minimum qualifications

• Bachelor's degree in Mechanical or Industrial Engineering, related discipline, or equivalent practical experience.
• 10 years of experience in mission critical facility design and construction environments.
• Experience in mission critical facilities and their mechanical infrastructure.

Preferred qualifications

• Master's degree in Engineering, Business or relevant field, or professional engineering license.
• Experience in estimating, mechanical design, operation, and commissioning of mission critical data center mechanical equipment.
• Experience in design, construction, and commissioning of mechanical cooling plants, fire suppression systems, fuel oil systems, domestic water systems, and sanitary sewer systems in mission critical facility design and construction environment.
• Experience designing modular building scale assemblies, with an understanding of mechanical tolerances and tolerance analysis.
• Knowledge of mechanical engineering and design principles with expertise in medium-scale production, structural beams/elements, and international building codes.
• Operational knowledge of construction safety procedures.

Seeking a Frontend Software Engineer to design and implement user interface components for dynamic web applications in ReactJS.

This role involves translating wireframes and mockups into clean, efficient code and collaborating with cross-functional teams to ensure seamless integration with backend services.

You will be responsible for building reusable components, optimizing performance across devices and browsers, and contributing to the development of high-quality, scalable applications.

This is a permanent full-time role

YOUR NEW JOB

• Transform designs into high-quality, responsive Frontend code using ReactJS, HTML5, CSS3, WebSocket
• Develop, test, deploy, & maintain Frontend user interface components with a focus on usability & scalability
• Leverage modern web technologies to create dynamic, interactive web applications
• Build reusable components and frontend libraries to streamline future development
• Optimize web components for performance across a wide array of web-capable devices & browsers
• Collaborate with the design team to enhance overall UI/UX experiences
• Integrate APIs using RESTful services for seamless backend communication
• Work with cross-functional teams to plan, design, & maintain web-based applications built on Java technologies
• Deploy production systems and provide support post-implementation.
• Engage in all phases of the software development lifecycle, ensuring quality and consistency
• Investigate and resolve system issues, ensuring minimal downtime at all times
• Analyze service interdependencies (applications, systems, databases) to identify & address inefficiencies
• Propose and document opportunities for application & process improvements
• Deliver timely solutions while adhering to high development standards

WHAT IS NEEDED FROM YOU

• 3 years hands-on fulltime working experience in ReactJS
• Proven experience in developing web applications, web forms, & enterprise workflows
• 2+ years of expertise in systems analysis, design, and programming
• Hands-on proficiency in:
  Modern JavaScript frameworks such as ReactJS, with a solid understanding of core principles
  JavaScript, including DOM manipulation and modern ECMAScript features
  TypeScript or other type-safe JavaScript variants
  Advanced HTML5 and CSS3
  CSS pre-processors (e.g., SASS, SCSS, LESS) and bundlers (e.g., Webpack)
  RESTful API integration
  Basic knowledge of data structures and algorithms
  Version control systems like Git
• Strong skills in benchmarking and performance optimization
• Fluency in English and Mandarin for effective business communication with Client & Internally

WHAT WILL MAKE YOU STAND OUT

• Experience coding for Mobile Gaming applications
• Mobile App Development Experience (React Native, iOS, Android)
• Experience with WebSocket
• Familiarity with JQuery
• Knowledge of UI/UX design principles
• Understanding of npm & its usage
• Hands-on experience with AWS Services
• Setting up CI/CD Pipelines
• Writing Unit Tests or End To End Testing

Product area

Google Cloud accelerates every organization’s ability to digitally transform its business and industry. We deliver enterprise-grade solutions that leverage Google’s cutting-edge technology, and tools that help developers build more sustainably. Customers in more than 200 countries and territories turn to Google Cloud as their trusted partner to enable growth and solve their most critical business problems.

Job description

When leading companies choose Google Cloud, it's a huge win for spreading the power of cloud computing globally. Once educational institutions, government agencies, and other businesses sign on to use Google Cloud products, you come in to facilitate making their work more productive, mobile, and collaborative. You listen and deliver what is most helpful for the customer. You assist fellow sales Googlers by problem-solving key technical issues for our customers. You liaise with the product marketing management and engineering teams to stay on top of industry trends and devise enhancements to Google Cloud products.

Additional job description

The Google Cloud Security team is a group of security business engineers (Customer Engineers) who are dedicated to making the world a safer place by helping organizations protect themselves from cyber threats.

Qualifications

Job responsibilities

• Work with security businesses and Google Cloud teams to identify and qualify business opportunities, understand customer technical and compliance objections, and develop strategies to resolve blockers.
• Work with Google Cloud Security products to demonstrate and validate solution benefits in customer and partner environments. Maintain technical knowledge.
• Support Google Cloud Security opportunities and relationships, own technical aspects of solutions, and deliver presentations, product, solution briefings, proofs-of-concepts, and demos to customers, partners, and stakeholders.
• Prepare and deliver product messaging in an effort to highlight solutions value proposition using techniques including presentations, product demonstrations, white papers, trial management, and response documents.
• Travel to customer sites, conferences, and other related events.

Minimum qualifications

• Bachelor's degree or equivalent practical experience.
• 10 years of experience in a technical business engineering role in security or cloud native environments.
• Experience in cybersecurity (e.g., threat detection, malware intelligence, cloud security posture management, or identity and access management systems).
• Experience in selling/demo/Point of View (POV), Security information and event management (SIEM), Security Orchestration Automation and Response (SOAR) and Threat Intelligence solutions.
• Ability to travel up to 50% of the time.

Preferred qualifications

• Master's degree in Computer Science, Engineering, Mathematics, a technical field, or equivalent practical experience.
• Certification in cloud or security industry.
• Experience implementing security solutions for enterprises (e.g., threat detection and hunting, malware intelligence, cloud security posture management, or Identity and Access Management systems).
• Knowledge of product and solution market trends in the cybersecurity industry (e.g., ransomware, attack frameworks, zero trust, etc.).
• Ability to communicate and deliver presentations.
• Excellent problem-solving, communication, presentation, and active listening skills.

About SHOKZ

As the first bone conduction headset manufacturer in China, Shokz pioneered the foray into patented bone conduction technology and has built itself as a world-renowned headphone brand with its signature open-ear design. Utilising numerous patented acoustics and health technologie, Shokz aims to accelerate the development of their True Wireless Stereo series, their bone-conduction hearing aid and health product line.

Job Description：

Here, we explore the art of interaction between circuits and human body together. From the collection, processing to transmission of physiological signals, we listen to th body‘s whispers; from the design of status monitoring modules to the analysis of human body composition and signal quality, we objectively record the changes. We are the front-end of signal processing, the foundation of function realization, and the determinant of product ceiling!

Job Scope：

1. Conduct research on algorithms applied to wearable devices, explore algorithms for physiological signal processing, analysis, action classification, and recognition.

2. Implement the hardware platform to enhance the functionality, performance, and reliability of the algorithms.

3. Apply algorithms to products to amplify product advantages and enhance user experience.

Job Requirement:

1. Majors in Electronic Engineering, Electronic Information, Microelectronics, Automation,Biomedical Engineering, Optoelectronic Information Science and Engineering, Signal and Information Processing, Medical Information Engineering, or related fields.

2. Possess a focused mindset, a curiosity to explore the nature of things, and a pursuit of technological excellence.

3. Have clear logic and be able to swiftly keep up with the latest scientific research results.

4. Passionate about scientific research, committed to the commercialization of research outcomes, and enthusiastic about marketing them globally.

5. Prior experience in signal processing, mathematical modeling competitions, or acoustic projects is preferred.

About Us

Vivo Surgical is a patient-focused, clinician-driven medical device developer and manufacturer. Headquartered in Singapore with offices in China and Thailand, we are pioneering a novel endoscopic surgical robot for complex endoluminal surgeries. ISO 13485 certified with international accreditations awarded such as the US FDA and European CE mark, our devices target the medical needs of the world through innovative applications of science & technology. These encompass such fields as in vivo surgical LED lighting, portable endoscopy and endoscopic robots, which are strategically co-developed with world-class healthcare institutions and KOL collaborators. Join us as we build towards our vision of being Asia Pacific’s leading medical device developer and manufacturer.

About The Role

We value the importance of having a robust engineering team that would serve as a key pillar for sustained commercial success. To that end, we are looking for an Electrical Engineer to join us on this journey. In this role, you will be part of our fast-growing team and will take ownership of your role from the get-go. You will be working on the electrical interfaces of our robot from the design and development phase all the way to manufacturing. You will be developing these solutions alongside our clinical KOLs to produce and test the parts and subsystems that will eventually be integrated into the robotic system. Throughout the process, you will also be involved in the verification and validation testing phase such as producing testers, generating test protocols and reports. Your role will require you to work in close tandem with our external partners and suppliers.

Your responsibilities shall include the following:

• Involved in the establishment of the robotic system’s design requirements according to users’ needs.
• Design and develop hardware system architecture and electrical systems based on set requirements.
• Generate schematics and electrical diagrams following respective standards and best practices.
• Source, evaluate and troubleshoot components, PCBAs, wire harnesses and subsystems.
• Assist in developing test protocols and reports to verify various subsystems and the main system.
• Involved in developing testers and test tools for verification tests.
• Support the team with electrical safety and EMC testing.
• Take part in the design control and risk management documentation generation tasks.
• Work with the team to optimize the system’s cost, manufacturability, quality, and reliability.
• Contribute and watch your ideas materialize into the fast-paced iterations of our system to constantly strive to meet the end users’ needs.

Your Qualifications & Experience

• Minimum Bachelor’s degree in Electrical Engineering, or related.
• At least 3 years’ experience in Electrical, Embedded Systems, Robotic Engineering, or related fields.
• Skilled in PCB design software such as Altium Designer or other similar tools.
• Experience in circuit design with ARM MCUs is essential.
• Hands-on experience with embedded communication protocols such as UART, I2C, SPI, CAN, TCP.
• Knowledge of embedded platforms such as MCUs (STM32), DSP, FPGA will be advantageous.
• Adept at utilizing equipment such as multimeters, oscilloscopes and spectrum analyzers.
• Hands-on experience with soldering equipment and crimpers preferred.
• Knowledge of C/C++ and Linux will be an advantage.
• Understanding of standards such as IEC 60601-1, 60601-1-2 and 62304 will be a plus.
• Strong analytical, troubleshooting, problem-solving, and communication skills.
• Ready to embrace a positive and collaborative mindset to thrive in the dynamic start up environment.

Contact

Please send your CV and cover letter to: [email protected]. We look forward to receiving your application.

Position Summary:

The Senior AV Service Engineer is responsible for providing technical support, data collection, coordinating maintenance and operation activities to ensure the optimal operation of autonomous vehicles.

Key Responsibilities:

Level 1 Troubleshooting and Technical Support:

• Provide on-site Level 1 troubleshooting support (when activated) and debugging for technical issues encountered. Work with Level 2 support to identify, diagnose, and resolve basic configurations concerns, or minor hardware malfunctions.
• Collaborate with specialized teams or senior engineers to escalate complex issues beyond Level 1 for further analysis and resolution.
• Offer comprehensive customer support by resolving queries, providing technical assistance, and ensuring customer satisfaction.

Data Collection and Analysis:

• Execute routine data collection processes from data loggers, onboard sensors, software systems, diagnostic tools and feedback forms
• Analyze collected data to identify performance patterns, trends, and potential areas for optimization or preventive maintenance

Maintenance Coordination:

• Conduct and facilitate regular inspections, diagnostic tests, and scheduled maintenance for all vehicle assets including on-board equipment to ensure optimal functionality and safety.
• Develop maintenance schedules, ensuring adherence to protocols and manufacturer's guidelines for regular inspections, software updates, and component replacements.

Documentation and Reporting:

• Maintain meticulous records of Level 1 troubleshooting procedures, data collection findings, and maintenance activities performed on the buses.
• Generate detailed reports outlining identified issues, recommended solutions, and actions taken for each maintenance task or diagnostic analysis.

Operational Coordination:

• Coordinate operational activities including scheduling, resource allocation, and route optimization for the AV fleet.
• Collaborate with engineering, operations, and management teams to facilitate coordination between technical tasks and operational requirements.
• Propose and implement improvements to enhance operational efficiency, reliability, and customer satisfaction.

Any other additional duties not listed above but deemed appropriate for product and operations support by project basis.

Qualifications:

• Minimally a diploma in relevant Engineering field with equivalent work experience, with a focus on mechatronics preferred
• Familiarity with Unix (Ubuntu) environment
• Good understanding of Class 4 autonomous buses equipped with SAE Level 4 autonomy, including sensor technology, control systems, and software.
• Proficiency in Level 1 troubleshooting, data collection methodologies, and coordination of maintenance activities for Class 3 and 4 vehicles and electronics equipment
• Excellent communication skills and the ability to collaborate effectively with technical teams and stakeholders.
• Dedication to meticulous documentation and reporting practices.
• A Class 3/4 driving license will be an added advantage.

Experience:

• 3-5 years of hands-on experience in service engineering, technical support and/or operations coordination. Prior experience related to Class 3 and 4 vehicles will be an advantage.

PRODUCTION ENGINEER/ EXECUTIVE ($3,500 - $4,000)

LOCATION: PANDAN RESERVOIR

WORKING TIMING: 7.30AM-5.00PM (5DAYS WORK WEEK)

1. We need a engineer or assistant engineer with mechanical educational background or years of experience hand on mechanical troubleshooting.

2. We can also search for experience technician that want to upgrade as assistant engineer or engineer.

JOB DUTIES & RESPONSIBLITIES:

1. Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.

2. Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.

3. Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.

4. Work with HR Department and assure that employee grievances are addressed in a timely fashion.

5. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.

6. Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.

7. Maintain and improve housekeeping in all areas.

8. Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.

9. Ensure on time submission of overtime record to HR Dept for computation of monthly salary.

10. Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.

11. Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.

12. Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.

13. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.

14. Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.

15. Assist in hiring of production personnel.

16. Maintain and update operating manuals for all the manufacturing equipment and facilities.

17. Maintain and update operating training manuals for all manufacturing processes.

18. Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Skill/Experience

* Minimum 2-3 years working experience in manufacturing environment.

* NITEC/ HIGHER NITEC / DIPOLMA IN M&E OR MECHANICAL

* Able to supervise and lead the subordinates.

* Willing to work after working hour or during non-working days.

* Able to work under pressure.

* Computer literate.

* Knowledge in ISO is an advantage.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei

EA Registered no.: R1543992

Recruit Now Singapore Pte Ltd

EA License no.: 21C0845

We are seeking a highly skilled AI Engineer specializing in Large Language Model to contribute to the development of a scalable and optimized South-East Asia foundation language model. In this role, you will collaborate with multi-region teams, adopting the advanced AI technologies and applying AI models and strategies to enhance business models. Your primary focus will be on following and crafting the advanced AI algorithms for South-East Asia language in the ecommerce domain.

Job Description:

• Contribute to the research and implementation of pre-training and alignment algorithms include ultra-large-scale multilingual pre-training technology, Mixture-of-Experts model training, Instruction Pretraining, SFT, and RLHF.
• Contribute to the explanation and safety improvement of AI, especially in trustworthy Large language models.
• Follow the frontier technologies and make comparisons about the advanced technologies to apply in business scenerios.
• Conduct experiments to test the performance of different AI models, identifying areas for improvement and exploring new directions for enhancement.
• Work collaboratively in a team environment, applying expertise in statistics, scripting, and relevant programming languages.

Requirements:

• Doctorate degree in Computer Science, Information Technology, Programming & Systems Analysis, or other related disciplines
• Excellent coding skills, data structure and basic algorithm skills, proficiency in Python/Pytorch coding.
• 4 years of research experience in basic principles and training methods of industry-leading LLM (such as GPT, LLaMA).
• Have research experience in text generation or dialogue systems
• Excellent problem analysis and solving skills, able to deeply solve problems in large model training and application.
• Good communication and collaboration skills, able to explore new technologies with the team and promote technological progress.

Responsibilities:

• The Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification.
• It is also expected that you will conduct periodic design reviews, including with application engineers.
• It is also expected that you will support test development and product development teams in bringing projects to production.

Requirements:

• PhD/Master’s Degree in Electronics/Electrical Engineering.
• Minimum 6 years’ experience in Analog or Mixed-signal IC design.
• Very good knowledge of CMOS processes.
• Highly proficient in analog and mixed-signal IC design EDA tools.
• Experienced in analog and mixed-signal circuit designs, such as regulators, DC-DC converters, low-power, low-noise biasing circuits and amplifiers, sigma-delta modulation and ADCs, etc
• Experience in design of high resolution, low power sigma-delta modulation preferred.
• Experience in design of ultra low power ADC preferred.
• Skilled in laboratory testing of IC prototypes.
• Knowledge of Linux operating system required.
• Experience in MEMS interface ASIC design advantageous.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on improving tool performance and availability, in charge if maintenance, diagnosing failures and implementing effective solutions to meet uptime and cycle time requirements in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD); or Physical Vapor Deposition.

Key Responsibilities

• Maintain equipment performance in cleanroom environment for quality production.
• Handle on-duty tasks and conduct fundamental alarm troubleshooting; identify root cause and problem-solve critical equipment issues with urgency
• Install and qualify new tool sets on schedule to increase capacity promptly
• Continually improve tool uptime availability, drive defect reduction and enhance hardware capability
• Develop defense and monitoring system to prevent equipment failure or performance lost.
• Analyze complex data sets and derive actionable insights to optimize equipment parameters and controls
• Actively collaborate with equipment suppliers and partners to identify tool deficiencies; develop, evaluate, and validate corrective and preventive solutions

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About the Opportunity

This role in our Technology squad is embedded in a high caliber, cross functional team that develops and executes our exciting technology strategy to deliver better outcomes for our business and customer.

As a Software Engineer, you will be working with an agile and innovative team and build on your technical expertise with a myriad of technologies, projects and platforms to deliver our business priorities and conquer technical challenges.

What You'll be Doing

• Support the delivery of projects in all aspects of Software Development Life Cycle including system analysis, design, development, quality assurance, UAT, maintenance and ongoing support.
• Contribute to Agile software development lifecycle and be familiar with DevOps processes.
• Develop pragmatic and fit for purpose solutions of high technical quality.
• Work with stakeholders to define and clarify functional requirements and scope to deliver robust cost-effective solutions.
• Maintain software design, engineering processes and quality standards.
• Identifying and addressing bottlenecks in the application or broader infrastructure.
• Assist with ad-hoc duties assigned by Manager.

What We Are Looking for

• Diploma/Degree in Information Technology/Computer Science or related fields.
• 2 years’ experience in full stack software development.
• Required skills: C#, .NET Core framework, Angular.
• Knowledge in DEVOPS, Docker Container, Cloud Implementation, Secured Webservice will have an added advantage.
• Highly collaborative team player, detail-oriented and passionate with technology.
• Ability to thrive in fast-paced, exciting environment.

We regret that only shortlisted applicants will be notified for an interview.

To learn more about our Organization, please visit https://www.alliancehealthcare.com.sg.

Overall Summary:

Network Engineer will drive the implementation of strategy for infrastructure operations and maintenance to ensure availability of stable and secure systems. He/She manages project resource allocation and develops infrastructure implementation, operations and maintenance engineers; scopes out policies and sets performance expectations. He identifies problems and presents new methodologies and/or solutions to key stakeholders to enhance and improve the delivery of infrastructure operations and maintenance services.

Roles and Responsibilities:

Support infrastructure design and implementation

• Support technical system analysis to determine the extent to which solutions perform “as required” to ensure that future solutions meet anticipated demand
• Support the design and implementation of infrastructure solutions that adhere to current architecture standards
• Lead the design installations, system migration and integration
• Lead the testing and handover of implemented infrastructure solution

Support infrastructure operations

• Support delivery of optimal infrastructure operations
• Create documents on administration, installation, configuration and troubleshooting
• Apply diagnostic tools to perform technical analysis of complex software, hardware and infrastructure equipment
• Support the development of report on infrastructure capabilities and limitations

Maintain infrastructure

• Support the improvement of maintenance capability by using automation for upgrades, enterprise backup and storage
• Identify key infrastructure operations issues and maintenance priorities
• Support the implementation of agreed infrastructure change requests and maintenance routines
• Develop report on performance and availability of infrastructure systems by review of service uptime, utilisation, throughput etc.

Optimise infrastructure performance

• Support the initiatives to improve the infrastructure systems and service delivery through automation and virtualisation technologies
• Support the monitoring of performance, availability and security of infrastructure systems and key operational metrics

Resolve incidents

• Support problem/issue identification and resolution
• Escalate problems/issues
• Support simulation of user problems to resolve operating difficulties
• Diagnose problem source through discussions with users
• Recommend system modifications to reduce user problems
• Support planned maintenance events, system backup processes and disaster recovery drills
• Support implementation of preventive solutions

Qualifications/ Requirements:

• Bachelor in Computer Engineering
• Possessed CCNA, CCNP, CCIE is preferred.
• At least 5-8 years of network experience
• Experience in leading a team of 3-5 network engineer.
• Familiar with Cisco, F5, VM
• Exposure to large scale project execution
• Open to support patches/ upgrades and Tech refresh (after office hours/ weekends)

JOB DESCRIPTION

This job focuses on software development for Software as a Medical Devices. System engineer will be working closely with Project Managers and project teams to ensure the software as a medical device product management Lifecyle is followed thoroughly.

• Support project manager to plan and execute Software as a Medical Device (SaMD) projects including AI applied to healthcare.
• Support technical team in product development, design verification and validation of medical devices including software as medical device.
• Prepare, design and development documentation by working together with software developers, quality and regulatory personnel.
• Prepare project agreements, procurement specifications and technical documents.
• Follow-up on project milestones.

JOB REQUIREMENT

• Preferred to have one year of experience in software development or medical device product development.
• Educational background of computer engineering or bio medical engineering.
• Knowledge in software development, experience in software development environment will be an added advantage.
• Knowledge / willingness to learn the ISO 13485 documentation practices and drive project teams for adherence.
• Good follow up skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Product area

Google Cloud accelerates every organization’s ability to digitally transform its business and industry. We deliver enterprise-grade solutions that leverage Google’s cutting-edge technology, and tools that help developers build more sustainably. Customers in more than 200 countries and territories turn to Google Cloud as their trusted partner to enable growth and solve their most critical business problems.

Additional job description

The Google Cloud Platform team helps customers transform and build what's next for their business — all with technology built in the cloud. Our products are developed for security, reliability and scalability, running the full stack from infrastructure to applications to devices and hardware.

In this role, you will be helping our customers, developers, small and large businesses, educational institutions and government agencies, see the benefits of our technology come to life. You will be understanding the needs of our customers and helping shape the future of businesses of all sizes use technology to connect with customers, employees and partners.

You will be the technical expert and trusted advisor for our customers, helping them design, deploy, and optimize AI solutions using cutting-edge hardware and software. Your focus will be on Graphics Processing Units (GPUs), accelerators (including Field-programmable Gate Array (FPGA) and Application-Specific Integrated Circuit (ASIC)), and Google Tensor Processing Units (TPUs). You will work closely with sales, product management, and engineering to ensure our customers achieve maximum value from their AI investments. You will be responsible for scaling and helping accelerate GCP AI Infrastructure business growth.

Qualifications

Job responsibilities

• Serve as a trusted advisor to customers, helping them in understanding and incorporate AI accelerators into the overall cloud strategy by recommending migration paths, integration strategies, and application architecture that incorporate Google Cloud AI optimized infrastructure.
• Demonstrate how Google Cloud is differentiated, highlighting the power of accelerators by working with customers on proof-of-concepts, demonstrating features, optimizing model performance, profiling, and bench-marking.
• Build repeatable assets to enable other customers and internal teams.
• Influence Google Cloud strategy at the intersection of infrastructure and AI/ML by advocating for enterprise customer requirements.
• Lead business and Workload acceleration on AI Infrastructure products and solutions for GCP.

Minimum qualifications

• Bachelor's degree in Computer Science, Mathematics, a related technical field, or equivalent practical experience.
• 10 years of experience with cloud infrastructure.
• 5 years of experience in a technical role focused on AI infrastructure or related areas.
• Experience building and operationalizing machine learning models.
• Experience with GPU programming (CUDA, OpenCL) and optimization techniques.

Preferred qualifications

• Experience with high-performance computing (HPC) environments and contributions to open-source projects related to AI or infrastructure.
• Experience training and fine-tuning large models (i.e., image, language, segmentation, recommendation, genomics) with accelerators.
• Experience with performance profiling tools (i.e., Tensorflow profiler, PyTorch profiler, Tensorboard).
• Experience designing/architecting large-scale infrastructure farms for specialist AI use cases.
• Experience with running MLPerf benchmarks, distributed training and optimizing performance versus costs.
• Excellent communication and presentation skills.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Description

• Conceptualisation and design of facades, preparation of drawings and structural calculations
• Delivery of technical presentations
• Coordination with clients, architects, consultants, façade contractors, suppliers and other project team members
• Supervision of construction, site inspection and training of constructors
• Preparation of technical submissions, proposals and documentation

Job Specifications

• Singaporean or PR preferred
• Degree in Civil, Structural or Mechanical Engineering or related disciplines.
• 3 – 5 years of experience in façade design, engineering and construction and project management
• Proficient in CAD software to create designs and solve technical issues.
• Strong and diverse technical background with effective presentation skills
• Well-versed in construction trends, international design standards and building regulations.
• Possess a wide network of building professionals and property developers.
• Ability to multitask and work well in a team

Knowledge, Skills and Abilities

• Proficient in CAD and 3D Modelling software - Revit, Rhino, Sketchup software
• Possesses deep understanding about various façade materials.
• Well informed in construction trends, international design standards and building regulations.
• Demonstrate organisation and communication skills
• Possesses relationship building and networking skills.
• Skilled in interacting with people of diverse cultural backgrounds at various levels.
• Possesses strong project management skills.
• Willing and able to travel as needed (1 – 2 times/month)

Position Summary:

The Systems Engineer undertakes complex projects related to systems

provisioning, installations, configurations as well as monitoring and

maintenance. He/She applies highly developed specialist knowledge and

skills in systems administration and works toward continuous optimisation

of systems performance. He/she implements systems improvements and

instructs other IT staff in the resolution of complex issues. He/She is required

to be on standby with on-call availability with varied shifts including

nights, weekends and holidays.

He/She is able to quickly and effectively solve issues as they arise. He/She is able

to methodically identify the cause of the issue, evaluate it and develop a

solution in

collaboration with the team. He/She communicates effectively and displays

high level of service standards.

Role and Responsibilities:

Execute Systems Administration Service Levels

• Monitor systems performance and usage, including response times
• Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting
• Communicate regularly with technical, applications and operational staff to ensure systems integrity and security
• Determine the systems’ short- and long-term requirements
• Manage systems report production

Advise on System Capabilities

• Advise senior leaders on system concepts and functional capabilities
• Provide technical advice to the team and clients on installation, setup configuration of systems
• Interpret internal or external business issues and recommends solutions/best practices
• Implement plans to make systems available to users in a shared, secure and controlled manner

Develop New Systems

• Lead the development of new systems as per the system requirements
• Design security and integrity controls
• Conduct new systems testing and implementation
• Define the system maintenance procedures
• Analyse the use of new systems to identify enhancement needs
• Lead research initiatives for the development of advanced and automated approaches for system administration
• Optimise systems performance
• Seek opportunities to optimise the delivery of systems services with emphasis on availability, reliability, scalability, and security
• Conduct regular system audits and upgrades
• Develop automated processes to define, measure, and report on service quality, stability and capacity Resolve issues
• Oversee the assessment of risks to systems
• Identify complex system issues to provide advisory to the stakeholders
• Investigate cause of systems issues
• Resolve complex issues
• Provide escalation support for issues presented by the user

Requirements / Qualifications

• Degree in Computer Science, Engineering or equivalent.
• At least 5 - 8 years’ experience in developing, implementing and
• maintaining IT systems
• Systematic in approach and familiar with enterprise level troubleshooting.
• Strong communications skills with stakeholders and ROs.
• Experience in healthcare applications preferred and/or willing to take up the challenges in a healthcare related industry.

Position Summary / Project Description

This is for the Automation Team under the Systems Technologies which focuses on DevOps and automation for internal IT that includes a lot of automation work around IaC.

Roles And Responsibilities

• Design, develop and implement various infrastructure automation and robotic process automation to transform current operation processes.
• Present ideas for process/system transformation
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks
• Ensure smooth transition of processes

Requirements / Qualifications

• Minimum Degree in Computer Science / Information Technology or equivalent.
• Proficient in automation technologies such as Ansible, Chef, CI/CD, Jenkins, Terraform etc.
• Minimum 4 years and above of relevant hands-on experience in system operation support and project management.
• Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.
• Experience in troubleshooting, resolving, and communicating incidents and underlying issues to identify root cause.
• Possesses strong analytical skills to diagnose and address application problems.
• Result and customer oriented with multi-tasking capabilities

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.