Main Responsibilities

• Reports to the Principal Engineer (Electrical).

Design & Solutioning

• ­ Support/participate in engineering design for integration and system development HVAC electro-mechanical systems.
• ­ Prepare, or supervise the preparation of, drawings for HVAC plant system general arrangements, power single line diagrams, cable block diagrams, instrumentation loop diagrams, P&IDs, control system architecture drawings, and cable, instrument and I/O schedules at detailed design level.
• ­ Drafting of panel layout, schematic and control drawing of starter and PLC panel.
• ­ Develop and release of engineering component and assembly drawings.

Projects & Operations

• ­ Support schedule development for key project timelines/milestones.
• ­ Participate Factory Acceptance Test (FAT) of starters and PLC panels.
• ­Conduct testing and commissioning for projects.
• Attend to ad-hoc electrical issues at maintenance sites for troubleshooting and provide recommendations.
• Contractor liaison, engagement/provide requirements.
• ­Supervision: Oversee engineers/subcontractors to generate detailed drawings, compile reports.
• Perform review/analysis, perform diagnostics and troubleshooting of electrical issues.

• Evaluate / review selection of electrical subcontractors.
• Review testing and certification reports.
• Quality Assurance: Complete electrical quality assurance tasks and equipment inspection.
• Training: Assist with recruitment, training, and onboarding of new hires.
• Safety and Compliance: Ensure a safe work environment and compliance with relevant standards.

Qualifications and experience

• Education: Diploma/Degree in Engineering/Facility Management
• Experience: >10 years project/facility management, factory plant operations.
• ­In-depth knowledge in panel design, layout arrangement of starter panel and PLC panel.
• ­In-depth knowledge on HVAC systems and HVAC(ACMV) controls, VFD, Start-Delta and Auto Transformer starters.
• Knowledge on HVAC systems, facility, safety and construction regulations with respect to chiller system installation would be an advantage.
• Skills: Strong problem-solving, analytical, and organizational skills. Proficiency with CAD software and excellent communication abilities.
• Certifications: Well versed in Singapore CP and Standards for panel design and electrical discipline.
• Required fluency in English; And/or Mandarin/Cantonese, other Asian languages would be beneficial e.g. Korean/Bahasa/Thai etc.).

Key Qualities

• Leadership: Demonstrate strong leadership and motivational skills.
• Interpersonal Skills: Excellent negotiation and communication skills to establish relationships with clients, vendors, and suppliers.
• Adaptability: Ability to multitask and adapt to new challenges and technologies.

Please apply here: https://talent.sage.hr/jobs/b0aa80ab-6951-4717-b49e-37ac3c199206

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for Machine Learning Research Engineers with the following backgrounds:

- Generative Modelling (particularly LLMs and multi-Agent systems)

- Data science

- High-performance Computing

- Data-driven personalised healthcare

- Model-based personalised healthcare (e.g. pharmokinetic modelling)

- Translational and regulatory expertise in medical devices

As a Machine Learning Research Engineer, the successful candidate will contribute to the programme by developing and implementing novel machine learning algorithms with focus on security and data privacy, as well as translating recent AI advancements to the healthcare setting.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on creating an engineering plan for land development based on their calculations and any research conducted. They should have experience with AutoCAD and be able to utilize strong design skills in order to create visual aids. By utilizing strong organizational and communication skills, this candidate will also have the ability to execute a project based on the criteria outlined.

Key Responsibilities

• Take charge of facility CIVIL&MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management CIVIL&MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Civil Engineering or a related STEM field.
• More than 5 years of construction project management experience, including 300mm semi-conductor Fabrication plant construction experience.
• Good written and verbal communication skills in English
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Responsibilities:

• Implement simulation models of AI SoC or subsystem designs

• Perform computer architecture performance simulation

• Analyse experimental data and perform architecture explorations

• Identify bottlenecks in design and provide feedback on micro-architecture

• Propose chip architecture optimizations for chip performance, power, and area improvement

• Cross-team collaborations to deliver high quality chip products

• Validate the correctness of the AI chip designs

• Write patents

Qualification:

• Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

• Familiar with computer architecture, such as AI accelerator, CPU, network-on-chip, memory hierarchy

• Familiar with C/C++ language

• Familiar with computer architecture simulation is preferred

• Strong learning capability, good communication and collaboration skills

• Fresh graduates are also encouraged to apply

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Industrial Engineer to be part of our Industrial Engineer Department diverse team of talent.

What you will be working on:

• Maintain and improve capacity planning methodologies to ensure accuracy
• To achieve planned mix & capacity through equipment utilization improvement/conversion/other capacity improvement plans to ensure the plans meet operations goals
• Establish layout plans for all production equipment based on operation needs
• Ensure timely equipment installation/release for production to meet operation’s needs
• Initiate Tool-to-Tool Matching (Golden/Lemon) as well as Best-In-Class benchmarking to strie for the best perforamnce of the tools
• Update/maintain tool capacity/productivity database for capacity planning & productivity indices tracking
• Manage capital budget to reflect necessary equipment requirement for capacity mix and new technology introduction
• Establish standard costing methodologies & wkly/qtly/annual standard costing
• Cost management (forecast/tracking/improvement/modeling/analysis/benchmarking)
• People productivity management/coordination
• Initiate/lead/drive continuous improvement projects & Best-Known-Method sharing
• Strategic planning initiatives for capacity expansion, tool/people productivity improvement & cost reduction
• Lead/coordinate people productivity/automation initiatives. Headcount modelling
• Business Continuity Management and Risk assessment
• Enhance current systems, improve methodology & modelling
• Coach/mentor & train new Engineers/Associate Engineers

More about you:

• Degree in Industrial Engineering/ Mechanical/ Manufacturing
• Functional / Technical skills and knowledge: Knowledge in semiconductor processes and IE tools used in the semiconductor industry
• Computer skills : MS Office, MS Access, VBA, SQL, Oracle, Cognos, AutoCAD
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

.Supervise project team and sub-contractors to take positive actions and accountability for their assigned work and complete their works on time as per agreed.

· Liase with Client, Consultants and Project team for planning, executive and completion of projects.

· Manage and supervise the team of technical staff and subcontractors carry out maintenance services, schedules, improvement works . To make sure standards of building performance, quality, time and cost schedules and safety complied.

· Leading monthly meetings and submission of routine reports.

· Oversea and overall responsible for works carried out by Junior Supervisors assigned.

· Responsible for keeping daily work schedule.

· Attend regular meetings with client , supplier and sub-contractors.

· Analyze, manage and track projects costs against budget

Jason Marine Group Limited is a Maritime-centric Equipment and Service Provider based in Singapore, providing marine electronics and communications equipment/services and integration services for the commercial marine and offshore industries in Singapore, Asia and Europe regions.

We are seeking a Commissioning Technician to manage the design and installation of the marine electronics and communications equipment/services onboard shipping vessels, not limited to locally, offshore and overseas. He/ She will report directly to Commissioning Manager and the Energy Team in carrying out the following work and responsibilities:

• Support with implementation/ assembly/ design/ testing with system or/ and project Engineers.

• Carry out installation, termination, testing, troubleshooting, but not limited to Navigation, IT, Scada, Communication system and equipment in workshop assembly and onsite.

• Assist and/ or carry out Factory Acceptance Test & Site Acceptance Test with client.

• Contribute necessary improvements and offer advice about operational procedures.

• Work with the team to investigate problems and diagnose and repair faults, if any, in order for the equipment to work to its specifications

• Help out in the timely and accurate reports, documentation, timesheets, service reports as per company/ client format for submission and reporting.

• Work with the Service Department to resolve enquiries, if required.

• Any other associated tasks and responsibilities assigned from time to time.

Other Requirements

• Able to work under tight schedule and minimum supervision.

• Able to travel in short notice.

• Good verbal communication skill.

• Physically capable and available to work overtime including weekends and public holidays.

• Ensure a safe working environment.

• Experience in Telecommunication system in marine, shipyard, offshore is preferred. Job Title and Grade will commensurate with experience.

• Fresh candidates are also welcome as there will be onboard mentorship and On-Job-Trainings (OJT).

• Desirable overtime allowance after probation period.

Interested applicants can also send your resume/ cv to ‘[email protected]’.

Job Summary

We seek an experienced and motivated Software Quality Engineer to join our forward-thinking tech team. In this role, you'll ensure our platform is reliable and meets high-quality standards. This position allows you to work across teams, shaping and implementing advanced QA processes that support scalable, reliable, and innovative solutions

Responsibilities:

Test Strategy and Planning

- Define and lead comprehensive QA strategies, covering all phases of the software development lifecycle.

- Develop, manage, and execute manual and automated test plans, cases, and scripts to ensure thorough testing.

Automation and Tooling

- Lead the development of automated testing frameworks using Cypress, Playwright or any automation tool for end-to-end test coverage.

- Drive platform scalability by implementing performance and load tests using tools like Gatling, K6, or Jmeter.

Quality Assurance

- Perform contract testing to ensure smooth interaction between microservices.

- Lead regression testing efforts for bug fixes and new features to maintain overall quality.

- Oversee the end-to-end testing pipeline, resolving issues promptly to avoid any delays.

Cross-Functional Collaboration

- Work closely with product managers, developers, and DevOps engineers to meet project requirements and deliver high-quality software.

- Contribute to agile team processes, including sprint planning and other ceremonies, with valuable QA insights.

- Coordinate with QE teammates to prepare and lead weekly deployments, ensuring smooth execution.

Issue Resolution and Reporting

- Accurately document, track, and report software defects, conducting root cause analysis as needed.

- Provide timely and detailed reports on QA activities, testing outcomes, and relevant quality metrics.

Requirements:

- Expertise in software quality assurance, with a strong focus on automation testing (e.g., Cypress, Playwright).

- Demonstrated experience with performance testing tools such as Gatling and Autocannon.

- Proficient in JavaScript (TypeScript) or Java

- Familiar with frontend and backend technologies (e.g., ReactJS, ExpressJS, Gin-gonic), as well as cloud platforms (AWS, Docker, Kubernetes).

- Knowledgeable in CI/CD tools (e.g., GitLab, ArgoCD) and relational databases (MySQL, PostgreSQL).

- Solid understanding of REST and GraphQL APIs, JWT for authentication, and search technologies like Elasticsearch.

- Exposure to additional testing tools and caching systems like Redis.

- Experience with logging and monitoring platforms such as Splunk or OpenSearch.

Qualifications

- Bachelor’s degree

- Strong problem-solving, analytical, and communication skills.

Job Overview

The future of technology is full of amazing possibilities that started in semiconductor manufacturing plants. Autonomous driving, drones, the Internet of Things – all of it is possible because of the breakthroughs in semiconductor manufacturing. From large dust-free factory to fully automated machines, this unmanned factory is not a dream but a testament of UMC daily operation in our contribution towards the future of technology. Join us and be part of UMC Smart Factory in managing complex production processes which allow you to experience first-hand on the operation of state-of-the-art factory and accelerate your growth!

Responsibilities

• Manage the production metrics of fully automated production lines
• Predictively identify and address possible production bottlenecks in a timely manner
• Coordinate resources to achieve daily production goals
• Lead in continuous improvement projects to increase productivity, staff operation efficiency and quality

Qualifications

• Possess at least a Bachelor's Degree in Electronic Engineering, Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering, Industrial Engineering, or Computer Science.
• At least 2 years of relevant working experience in semiconductor industry foundry
• Adept in project management as well as a strong sense of commitment
• Possess good communication skills in coordinating between relative parties
• Is self-demanding and committed to innovative solutions to complete tasks
• Proficiency in Excel(VBA) & SQL or Tableau for data analysis
• Able to commit shift work
• On duty required on weekend and Holiday
• Standby 24-hour for Fab Operation

Position

Assistant Process Engineer

Reports To

Process Engineer

Job Overview

The Process Engineer helps in the technical processes of the Production Department. He/She ensures that the Processes and Methodology within the Production Department is technically sound and cost efficient.

He/She analyses Production and Relevant External Data for the Process Engineer to come up with New Strategies to Raise the Efficiency of Operations and Processes in the department. These include Assessing Viability of New Machinery, Introduction of more efficient tooling and Optimisation of important Production Parameters. He also collaborates with other departments such as QC/QA and Planning in Turntech Precision to ensure the Organisation’s KPIs are met.

Most importantly, he/she also is hungry to learn to get up to speed with his/her peers. He/She should also be a team player with the hard and soft skills to direct and motivate his/her teammates to reach production goals.

In this role, we hope to nurture leadership qualities to take charge and ownership of continuous improvement initiatives to further enhance the effectiveness of his/her department.

What your day-to-day will look like (EXPECTED TO PICK UP):

• Assessing Project and Resource Requirements
• Determining Production Quality Control Standards
• Overseeing all Technical Processes
• Organising the Repair and Routine Maintenance of Production Equipment
• Organising Relevant Training Sessions
• Study Energy usage patterns and find ways to save energy
• Assessment of New Methods of Production
• Assessment of New Tooling to aid in Production

You will thrive if you have:

• Min. 1 year of relevant technical and engineering experience
• Bonus: Autolathe or CNC Turning experience
• Strong understanding of the importance on leveraging other people’s expertise
• Willingness to roll up your sleeves and manage “dirty” data (missing or incomplete data sets)
• and produce actionable insights from the data to improve production efficiency
• Creative thinker with strong bias to action exhibiting a “can-do” attitude
• Leadership skills to go beyond the job scope and innovate based on business needs
• Strong team player who can be an active contributor to the leadership, sales, and product and other cross-functioning teams
• You understand the SME culture and can work autonomously in a flat and ad-hoc task-based organization
• Passion for Machining and Mechanical Systems (this industry is not for the faint of heart)

About your role

• Collaborate with senior application engineers and robotics experts to implement robotic software solutions for various industrial applications.
• Assist in configuring robotic systems to meet specific client needs, ensuring optimal performance and functionality.
• Support the integration of robotic hardware, sensors, and software components to create comprehensive industrial automation solutions.
• Participate in the creation of detailed technical documentation, including user manuals, guides, and system specifications.
• Assist in troubleshooting technical issues and providing timely solutions to ensure smooth operation of robotic systems.
• Collaborate with cross-functional teams to gather requirements, provide technical insights, and ensure successful project execution.
• Learn and develop expertise in the company’s proprietary robotic systems and technologies.
• Stay informed about the latest developments in industrial robotics and automation to contribute fresh ideas to projects.
• Adapt and learn quickly to new tools, technologies, and processes as required.

Requirements

• Bachelor's degree in Engineering, Robotics, Computer Science, or a related field.
• Basic understanding of industrial robotics concepts and principles.
• Strong problem-solving skills and an ability to work collaboratively in a team environment.
• Interest in automation, robotics, and industrial applications.
• Good communication skills to effectively share ideas and collaborate with team members.
• Attention to detail and a commitment to producing high-quality work.
• Open to travel overseas for deployments.

Nice to Have

• Familiarity with robotic hardware components and sensors.
• Previous experience with robotic programming or automation projects.
• Understanding of control systems and sensors used in industrial automation.
• Knowledge of CAD software for basic mechanical design tasks.
• Passion for technology, robotics, and innovation.

Please apply here: https://talent.sage.hr/jobs/12fc69c2-7012-4edc-b214-bb9c2ded1da2

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for IC Design Research Engineers with the following backgrounds:

- Digital IC Design

- Analog IC Design

As an IC Design Research Engineer, you will design and innovate secure circuits and systems for next-generation low-power IoMT devices and sensors, focusing on hardware security, and smart computing and connectivity platforms.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

Duties to Be Performed:

The Senior Chemical Engineer will work on designing, tendering, and monitoring the installation of bulk gas and special gas systems for industrial properties in semiconductors, electronics, biopharma, and related industries. The gas systems include bulk gases, high-purity inert gases, flammable gases, corrosive gases, hazardous gases, and related distribution networks.

The Senior Chemical Engineer will collate the client’s capacity requirements and specifications and prepare the conceptual design, make a detailed design for system capacity, configuration, schematic, P&ID, PFD, layout, distribution, and system parameters, and prepare documents like the scope of work, reports, specifications, standards, logistics, and detailed drawings for tender. He or she will review proposals from contractors and continue to support them during installation when required.

The successful candidate will work closely with other disciplines such as architects, civil, cleanroom, electrical, automation, mechanical, and construction engineers, as well as CAD/ BIM designer in designing and delivering the project.

Job / Skills Requirement:

You should have a bachelor's degree in chemical engineering or equivalent.

You should have sound experience in designing high-purity, and specialty gases and systems related to semiconductors manufacturing or similar facilities. You should be able to comprehend clients’ URS, and design with concept design, schematics, PFDs, P&IDs, routing layout, the scope of work, specifications, and functional descriptions. The experience in designing chemical systems will be definite added advantage.

Your familiarity with the Semi standards and Singapore standards, manufacturing tools, materials, and CAD/ BIM will be an added advantage.

You should be able to make presentations to clients and engineers on design, tendering, project execution, supervising progress, and quality of work.

Able to work independently.

Able to travel / relocate.

1. Assist Project Manager on Engineering efforts in technical projects at Semiconductor fabs in Singapore and occasional overseas.
2. Provide on-site engineering equipment start-ups, mechanical parts installation, trouble-shooting and maintenance support.
3. Acts as a Technical Resources in performing repair of Electro-mechanical Assemblies
4. Facilitates continuous improvement project that add value to customer.

Requirement

At least 1-2 years experience in Semi-Conductor Field

About Bruker:

Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.

Today, worldwide more than 9700 employees are working on this permanent challenge at over 90 locations on all continents. Bruker continues to build upon its extensive range of products and solutions, its broad base of installed systems and a strong reputation among its customers. Being one of the world's leading analytical instrumentation companies, Bruker is strongly committed to further fully meet its customers’ needs as well as to continue to develop state-of-the-art technologies and innovative solutions for today's analytical questions.

Bruker - Innovation with Integrity.

Please visit www.bruker.com.

Bruker Singapore is seeking for a Field Service Engineer within the service organization. He/She is an ambassador of Bruker Nano Surfaces Metrology (BNSM) instrumentation and technology. Bruker Nano Surfaces Metrology manufactures the world's leading Atomic Forces Microscopes, Stylus profilers, Mechanical Testers, X-Ray Diffractometer and non-contact 3D optical microscope instrumentation. This technical role responsible for customer direct post-sale instrumentation and application support including: installation, user and application training, instrument diagnostics/fix, and post-sale applications support. Individual must be customer focused with a strong technical background enabling our customers to maintain their instrument at peak performance and maximize productivity for their intended use case.

SUMMARY OF RESPONSIBILITIES:

· Performs site surveys, pre-installation, installation of Bruker Semiconductor Metrology Tools (AAFM(NanoMet), AFMi, TSOM & X-ray) for customers both domestic and international

· Provide high level technical support to external customers at their location

· Provide on-­site training to the customers

· Interface with cross functional work teams such as field applications, customer support/services, product management, manufacturing and marketing/sales

· Develop Service technical documentation

· Create, develop, and continuously improve the customer support & applications knowledge database

· Timely and professionally handle field service calls and issues arising from the field service

· Performs basic applications support of Bruker Semiconductor Metrology Tools for customers both domestic and international

· Visits, triage with field applications scientists as appropriate

· Timely complete and submit all required paperwork

· Flexible schedule to accommodate our customer’s needs

· Effectively handle multiple priorities, organize workload, and meet deadlines

· Communicate with the customer to ensure satisfaction and implement any necessary corrective actions

· Up to 30% traveling required within Southeast Asia (at times with short notice)

· Misc. other duties commensurate with the capabilities of a Field Service Engineer

ESSENTIAL FUNCTIONS:

· 90% Technical support (Diagnostics/troubleshooting/on-site/phone/e-mail/web-ex/SAP RMAs, etc.)

· 10% Knowledge database development, delivery of training, basic application support and Escalation support (technical analysis, cross-functional engagement, plan of action, on-site support, etc…)

ADDITIONAL RESPONSIBILITIES:

· Pre-sales support

· Other duties as assigned

EDUCATIONAL/EXPERIENCE REQUIREMENTS:

· Bachelor’s degree or equivalent technical qualifications in electrical/ mechanical engineering or physical sciences. Masters or higher-level education is preferred. Metrology experience within Semiconductor Market an advantage.

· Working knowledge of MS Office, Excel. Working knowledge and ability to test and troubleshoot mechanical, electrical analog and factory Automation

· Up to 5 years of relevant Semiconductor industry experience, preferably metrology products and with hands on instrument experiences.

· AAFM, AFM and X-ray service experience or background in Technical Support preferred.

Bruker is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, and other protected characteristics.

Job Description & Requirements

Get to know the Role:

• As a Site Reliability Engineer (SRE) you will help build a meaningful engineering discipline, combining software and systems to develop creative engineering solutions to operations problems.
• Much of our support and software development focuses on optimizing existing systems, building infrastructure and reducing work through automation.
• You’ll join a team of curious problem solvers with a diverse set of perspectives who are thinking big and taking risks.
• As an SRE you’ll be focused on running better production applications and systems.
• SRE is a key contributor to core infrastructure and functional development teams throughout the life cycle to help support software for reliability and scale.
• Key areas of focus include automation, application/platform uptime and quality, packaging/distribution techniques, platform design “operability”, analytics, deployment, adoption, and tool development, among others.
• The position will wear many hats from owning day to day health and performance, to identifying incidents/developing remediation plans, to working with open source software and experienced packaging techniques, to working with development teams and contributing to the strategic roadmap and execution.
• Candidates from a variety of software, platform, or automation engineering backgrounds will be considered for this position.

The day-to-day activities:

• Design, code, test and deliver software to automate manual operational work
• Troubleshoot priority incidents, facilitate blameless post-mortems and ensure permanent closure of incidents
• Engage with development team throughout the life cycle to help develop software for reliability and scale, ensuring minimal refactoring or changes
• Perform analytics on previous incidents and usage patterns to better predict issues and take proactive actions
• Perform the L1/L2/L3 support activities for the Production Support project with analysis and design work, including impact of requirements across all system components
• Build and drive adoption for greater self-healing and resiliency patterns
• Design automated software and product upgrades, change management, and release management solutions
• Participate in the 24x7 support coverage as needed

The must haves:

• Bachelor's degree in information systems, information technology, computer science, or similar.
• 1-3+ years professional experience in a software management position.
• Experience with dockers / containers / k8s.
• Direct production operations experience in a cloud environment.
• Experience contributing to technology and product strategy.
• Experience leading capability building initiatives across diverse areas such as infrastructure and operations automation, software quality, delivery automation and other core engineering.
• Demonstrated experience of driving operational efficiency and transparency of a growing engineering organization.

About the Opportunity

This role in our technology squad is embedded in a high caliber, cross functional team that develops and executes our exciting technology strategy to deliver better outcomes for our business and customer.

As a Senior Software Engineer, you will be working with an agile and innovative team and build on your technical expertise with a myriad of technologies, projects and platforms to deliver our business priorities and conquer technical challenges.

What You'll be Doing

• Support the delivery of projects in all aspects of Software Development Life Cycle including system analysis, design, development, quality assurance, UAT, maintenance and ongoing support.
• Develop pragmatic and fit for purpose solutions of high technical quality.
• Work with stakeholders to define and clarify functional requirements and scope to deliver robust cost-effective solutions.
• Maintain software design, engineering processes and quality standards.
• Identifying and addressing bottlenecks in the application or broader infrastructure.
• Assist with ad-hoc duties assigned by Manager.

What We Are Looking for

• Degree in Computer Science/Information Technology or related fields.
• At least 2 years’ experience in full stack PHP development.
• Knowledge of PHP web frameworks, e.g. Lavarel and Codelgniter.
• Knowledge of front-end technologies including CSS3, JavaScript, and HTML5.
• Understanding of object-oriented PHP programming.
• Bilingual in English and Chinese language, as this role will requires to frequently liaise with Taiwan counterparts.
• Proficient with code versioning tools including Git.
• Familiarity with MySQL databases.
• Highly collaborative team player, detail-oriented and passionate with technology.
• Ability to thrive in fast-paced, exciting environment.

We regret that only shortlisted applicants will be notified for an interview.

To learn more about our Organization, please visit https://www.alliancehealthcare.com.sg.

ABOUT Defense and Security Engineering Team

Established in Singapore in 1973, Thales Singapore Engineering Team leads and pioneers innovative solutions for the Asia-Pacific region. Our coverage spans across an extensive spectrum of fields, encompassing proven solutions in Defence & Military, Security & Surveillance, Intelligence & Big Data, Secure Radio Communications, to Cybersecurity, Network & Infrastructure Security.

We are at the forefront of cutting-edge technology with a rich legacy in excellence and innovations. With the combined expertise of 2100 staff in Singapore, and over 80,000 professionals across 68 countries, Thales Singapore Engineering Team is the key contributor in keeping Asia-Pacific & the world safe and secure, protecting and changing lives every single step we take.

Along with other departments in Singapore, such as Thales Research & Technology, we engineer state-of-art technological solutions from dreams into reality for the world. If you are ready to make a difference on a global scale, our team is the place for you. Join us today and embark on an extraordinary journey of writing the next chapter of history for a better world.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Application Integrator Engineer, you are accountable for:

· This position requires a deep understanding of

o integration frameworks,

o middleware solutions,

o APIs,

· The ability to troubleshoot complex issues and deliver innovative solutions. With a focus on strategic collaboration and continuous improvement, our ideal candidate is both detail-oriented and forward-thinking

· Guarantee the technical solution for infrastructure & deployment

o System architecture & PaaS implementation

o Define and develop the means so that products are correctly and continuously integrated and deployed in development, quality assurance, and production environments, respecting established rules.

o Support delivery teams with automated tools and scripts to provision infrastructure resources (compute, network & storage) in a simple and efficient manner.

· Secure the product operability

o Understand the functional context of the product up to the point of challenging functional decisions

o Guarantees that the product underlying architecture is state of the art.

o Ensures that operational best practices (supervision/monitoring, backups, archives, log management) are implemented.

· Ensure the software team is informed and aware of operational constraints, and if required trains the team on those topics.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· Possess 8 to 10 years of experience in the following:

· Design and implement integration solutions to connect multiple software applications.

o Develop and maintain APIs to facilitate data exchange between systems.

o Collaborate with software developers and IT teams to understand integration requirements.

o Monitor and troubleshoot integration issues to ensure continuous operation.

o Optimize and enhance current integration processes for improved efficiency.

o Document integration processes and maintain up-to-date technical documentation.

· Hands-on experience with message brokers like RabbitMQ or Apache Kafka

· Proficiency in scripting languages such as Python, JavaScript, or Shell scripts

· Familiarity with microservices architecture and containerization tools like Docker and Kubernetes

· Strong understanding of API management and development using REST or SOAP

· System skillset :

o System Administration basic skillset (services, ssh, user management, …)

· DevOps tooling advanced skillset :

o Extensive working experience (at least 3 years) with Containerization: Docker, Kubernetes and Helm

o Using and administrating GitLab CI/CD

o Developing and maintaining Ansible Playbooks and Modules

o Deploying and setup of CI/CD pipelines (closely work with development team to develop CI/CD pipelines and deploy into private and public cloud)

o Scripting experience in Shell (bash or Python) etc

o Using Jira / Confluence

o Code documentation using Markdown

Behaviour:

· Produces Ingenious, astute design, with an open mind

· Excellent communication, presentation and interpersonal skills. Able to fluently communicate with local project team and external stakeholders.

· Collaborative team players preferred

Responsibilities:

• Perform on-site installation, troubleshooting and debugging of autonomous vehicle (AV) systems and related components.
• Conduct and facilitate regular inspections, diagnostic tests, and scheduled maintenance for all vehicle assets.
• Assist in routine data collection and documentation optimization or preventive maintenance.
• Coordinate operational activities including scheduling, resource allocation, and route optimization for the AV fleet
• Collaborate with cross-functional teams to facilitate coordination between technical tasks and operational requirements.
• Any other additional duties relating to product and operations support.

Requirements:

• An Engineering diploma or degree in Electrical, Electronic, Mechatronics, Robotics, or Automation.
• Hands-on experience in systems deployment, service engineering, technical support, and/or operations coordination.
• Capability to adjust to a shift-based support working environment.
• Experience working in Linux OS environment.
• Practical expertise in electrical and electronic wiring as well as mechanical systems.
• Familiarity with ROS is a plus.
• A Class 3/4 driving license will be an added advantage.

Responsibilities

· Field service work on highly complex equipment which involves troubleshooting, diagnostic and repairing at customer wafer fab in local and overseas facility.

· Knowledge of Laser and optics is beneficial.

· Prepare field service reports on work activity and provide customer with supporting functions on re-occurring problems.

· Training and OJT will be provided.

Requirements

· Bachelor’s Degree or Diploma in Mechanical/Mechatronics/Electrical/Electronics Engineering

· Good interpersonal/communication skills in understanding customer needs.

· Shows initiative and can work independently.

· Able to work overtime and travel at short notice when required.

About Bruker:

Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.

Bruker offers differentiated, high-value life science and diagnostics systems and solutions in preclinical imaging, clinical phenomics research, proteomics and multiomics, spatial and single-cell biology, functional structural and condensate biology, as well as in clinical microbiology and molecular diagnostics.

Please visit www.bruker.com.

Bruker - Innovation with Integrity.

Bruker Singapore is seeking for an IT Service Engineer based in Singapore. He/ She is responsible for providing technical support and assistance to end-users within an organization. They are tasked with troubleshooting and resolving software and hardware issues, as well as configuring and deploying new hardware and software systems. The ideal candidate for this role should possess excellent problem-solving skills, strong communication skills, and the ability to work both independently and as part of a team. This is a two years contract (subject to renewal).

Areas of Responsibilities :

• Operate the day to day IT Service Desk to our employees through emails and online ticketing system.
• Monitors and track incident, service request in IT ticketing system. Responsible for dispatching and escalating ticket to next support level. Continuous monitoring and forward movement of end user issues until they are resolved.
• Manage and operate the installation/delivery of all End User Device including Desktops, Laptops, Monitors, Phones, Printers and Mobile device.
• Responsible for all PC heath status; ensure all computers are properly patched and virus protected.
• Provide assistance to users regardless of their geographical location.
• Performing any other IT related duties including on-demand project.
• Manage telecommunication system and cabling system. Work with external vendor to ensure smooth operations and SLA are met.
• Prepare and participate in disaster recovery and unscheduled shutdown drills
• Prepare report as request by management.
• Willingness to travel up to 30% in Asia Pacific
• Any other ad-hoc tasks assigned

Preferred experiences and qualifications:

• Minimum Diploma level (preferred) in a Computer Science or equivalent
• ITIL foundation certification highly preferred
• Some working knowledge in an IT Support Organization
• Preferably 1-3 years of related working experience
• Experience in handling different level of end users
• Experience in handling user request and communicate expectation
• Candidates with relevant qualifications are encouraged to apply

Technical Skills:

• Working knowledge of Microsoft Server and Active Directory
• Working knowledge of Microsoft Technology in General
• Working knowledge of Windows Operating System
• Excellent administration and reporting

Personal & Organizational Skills:

• Good problem-solving skills.
• Good communication skills, written and verbally across all levels of the business
• High analytical problem solving and troubleshooting skills
• Excellent task management skills
• Customer service focused
• Language: English – fluently, both written and verbal

Bruker is an equal-opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, and other protected characteristics.

Certain positions at Bruker require compliance with export control laws and as a result, all interviewed candidates for all positions will be screened pre-interview to determine their eligibility in light of export control restrictions.

Responsibilities

1. Classify the received Parts into self-repair/outside-repair/Stage/Scrap/Return and place them on the corresponding racks of each Category, and convert the ePMS Level 1 order into a Level 2 order.
2. Open bidding and repair the Parts to be sent to the manufacturer for repair, and convert the ePMS second-level order into a third-level order and issue a warehouse receipt.
3. Each unit listed on the front of the maintenance will be sent to the Parts for repair, and after completion, the ePMS secondary order will be converted into a closed case and returned to the warehouse
4. FAB Urgent case support : The original factory has no ingredients, or the unit price is very high and the seasoning is urgently needed
5. Track and manage the progress of the repaired items sent by the manufacturer for repair, and control the Parts Repair work for Cycle time; provide USER query
6. Key/Special Component Sourcing (for Parts that are discontinued or unreasonably priced).
7. Parts Sourcing / Replacement Solution for Old Discontinued Machines

Qualifications

1. Possess at least a Bachelor's Degree in Electrical and Electronic Engineering.
2. Minimum 2 years relevant work experience in semiconductor related technology equipment maintenance.
3. Knowledge of Servo control loop will be an advantage.
4. Good communication and interpersonal skills.
5. Able to work independently and able to handle stress effectively.

Please apply here: https://talent.sage.hr/jobs/55729b46-20ca-4792-9df2-360f30fbb5e3

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for Research Software Engineers with the following backgrounds and experience:

- Full-stack Software Development

- Distributed Systems

- Hospital Information Systems and Healthcare Applications

- Cybersecurity and Software Security

- High-performance Computing

- Network/System Administration

As a Research Software Engineer, the successful candidate will contribute to these developments by producing software tools, platforms and libraries as vehicles to carry out impactful research, develop engaging and interactive demonstrators and translate early-stage research prototypes into robust and usable applications.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

1. The role of Coordination Engineer shall encompass collaboration and chair meeting with all stakeholders
2. T serve as the primary point of contact for HQ, clients, vendors, and project teams.
3. To facilitate regular communication and meetings to keep all stakeholders informed of project progress.
4. To Identify and address any issues or obstacles that may impact project timelines or deliverables.
5. To assist in collaborate with relevant teams to resolve technical or logistical challenges, if possible.
6. To foster collaboration among HQ, stakeholders, PTO, LTA, and subcontractors.

Qualifications & Work Experience

• Bachelor’s degree in project management/ Electronic & Electrical, with 5 years of relevant experience, or Diploma in Mechanical, Electronic, Electrical Engineering with 10 years related field of experience.
• Excellent organizational and multitasking skills, with track record of managing project.
• Strong interpersonal and communication skills, capable of collaborating effectively with all various stakeholders.
• Ability to work under pressure and meet tight deadlines while maintaining high standards of quality.
• Problem-solving and decision-making.
• Risk assessment and mitigation.
• Attention to detail and quality assurance.
• Customer relationship management.

Job Scope:

Install, configure, troubleshoot, and support servers running on Windows and Linux operating systems.

Perform routine system maintenance tasks such as patching software, updating firmware, and conducting hardware evaluations/upgrades.

Manage user access control by setting up accounts, permissions, and ensuring adherence to company policies regarding data security.

Oversee the administration of internal resources including Active Directory (for Windows) or LDAP (for Linux), file sharing services, and print servers.

Monitor network traffic/server utilization to identify potential issues before they become critical problems; implement performance tuning strategies when necessary.

Administer SAN/NAS environments including disk provisioning, LUN management, zoning, fiber channel networking etc.; ensure efficient operation with minimal downtime through proactive monitoring/maintenance practices

Develop/implement backup recovery plans for critical data stored across various platforms;

Conduct regular audits/capacity analysis reports in order to plan for future growth needs while optimizing current resource usage.

Job Requirements:

Degree in Computer Science, Information Systems or related field preferred;

Minimum 5 Years work experience will be considered

Proficient in BIM software and AUTOCAD will be an added advantage

Good interpersonal and communication skills

Proven track record managing both Windows/Linux server environments

Experience with virtualization technologies like VMware/Hyper-V is highly desirable

Knowledgeable about configuring/maintaining enterprise-level storage solutions (SAN/NAS)

Strong analytical/troubleshooting skills combined with excellent communication abilities

Ability to document processes/procedures clearly concisely

Able to handle any adhoc jobs based on our Industry