Responsibilities:

• The Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification.
• It is also expected that you will conduct periodic design reviews, including with application engineers.
• It is also expected that you will support test development and product development teams in bringing projects to production.

Requirements:

• PhD/Master’s Degree in Electronics/Electrical Engineering.
• Minimum 6 years’ experience in Analog or Mixed-signal IC design.
• Very good knowledge of CMOS processes.
• Highly proficient in analog and mixed-signal IC design EDA tools.
• Experienced in analog and mixed-signal circuit designs, such as regulators, DC-DC converters, low-power, low-noise biasing circuits and amplifiers, sigma-delta modulation and ADCs, etc
• Experience in design of high resolution, low power sigma-delta modulation preferred.
• Experience in design of ultra low power ADC preferred.
• Skilled in laboratory testing of IC prototypes.
• Knowledge of Linux operating system required.
• Experience in MEMS interface ASIC design advantageous.

The L1 IT Support Engineer (IT ServiceDesk) is accountable for providing a high level of satisfaction among students and staff by providing first-level support for all GESS standard software and hardware. This position entails the diagnosis and assessment of end-users' technical requirements, utilizing sound discernment to promptly address and resolve any issues that may arise.

The engineer's responsibilities encompass the identification, investigation, and resolution of technical issues, as well as the prompt and effective response to support requests from students and staff through in-person, email, and phone interactions. It is anticipated that they will document, chart, and monitor all issues to ensure that they are resolved in a timely manner.

Additionally, they may occasionally offer technical training and support to GESS personnel and students. The engineer is instrumental in ensuring that the team remains dedicated to providing exceptional support and satisfaction, and it is imperative that they adhere to the GESS values and expectations for customer service.

Furthermore, they may be obligated to oversee initiatives as necessary, thereby facilitating the continuous enhancement of technology services and support strategies within the educational environment.

Key Accountabilities

First-Level Troubleshooting and Support:

· Provide initial troubleshooting by guiding users through in person, via email and IT ticketing system, and over the phone while also offering remote desktop support using Remote Desktop Software.

· Deliver quality service to students and staff in all assigned tasks, consistently upholding GESS values.

· Ensure timely and effective solutions for any technical issues that may arise with GESS technology.

Incident Management:

· Log and track support calls in the designated GESS system(s).

· Prioritize and escalate tickets as required to maintain high levels of customer satisfaction.

· Identify trends in support calls and develop documentation to address frequently occurring issues.

Communication and Reporting:

· Report problems and issues promptly, notifying management of any increasing trends, unusual activities, or repeated issues.

· Provide regular updates to customers on the status of ongoing resolution efforts.

· Attend daily and weekly meetings as requested or required to stay informed and aligned with team objectives.

Continuous Improvement:

· Recommend improvements for technology or systems, including procedural steps, increased training, and enhanced documentation.

· Access and utilize software updates, drivers, knowledge bases, and FAQs to assist in resolving end-user issues.

Collaboration and Support:

· Assist other teams in initiating, designing, and managing effective support solutions as required by the school’s needs.

· Collaborate with internal second-level support and departmental tech teams (Divisional Tech Help Center) for escalated or reassigned tickets.

Technology Development and Testing:

· Support the development and testing of new technologies to ensure operational integrity and functionality.

· Proactively communicate ideas, expectations, and goals while working with others to achieve desired outcomes.

Service Level Agreement (SLA) Management:

· Follow up on tickets approaching SLA deadlines to ensure timely resolution and avoid SLA failures.

Other Duties:

· Perform additional tasks as assigned by the Director of Technology, adapting to the evolving needs of the school environment.

Knowledge and Experience

Education:

· Diploma in Information Technology, Computer Engineering, or Business Information Technology.

Technical Skills:

· Proficient in Windows OS and Apple products.

· Experience with Microsoft Office 365 and computer troubleshooting.

· Knowledge of Mobile Device Management (JAMF or Intunes) is a plus.

· Familiarity with ID Card and digital signature systems is advantageous.

Experience:

· At least three years of IT support experience, preferably in an educational environment.

Soft Skills:

· Strong customer service orientation and effective communication skills.

· Positive attitude, initiative, and the ability to work independently and under pressure.

· Team player with a cooperative mindset.

Adaptability:

· Willingness to learn and adapt to new technologies and evolving IT environments.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a Research Engineer who will be responsible working on a project on cyber security and privacy issues for IoT and cyber-physical systems.

Responsibilities:

• Design and develop techniques that detect attacks on IoT/CPS;
• Perform analysis and simulations to validate designs;
• Implementation and development of demos;
• Assists with the editing and preparation of manuscripts, reports and presentations;
• Participate in presentations and demos for exhibiting work at appropriate events

Qualifications

Requirements

• BEng/BSc/BTech in Electrical Engineering, Computer Science or a related field;
• Programming experience and knowledge of cyber security would be a plus;
• Possesses research background with ability to read and understand methodologies in research papers;
• A good team-player;
• Open to Fixed Term Contract

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a Research Engineer who will be responsible working on a project on cyber security and privacy issues for IoT and cyber-physical systems.

Responsibilities:

• Design and develop techniques that detect attacks on IoT/CPS;
• Perform analysis and simulations to validate designs;
• Implementation and development of demos;
• Assists with the editing and preparation of manuscripts, reports and presentations;
• Participate in presentations and demos for exhibiting work at appropriate events

Qualifications

Requirements

• BEng/BSc/BTech in Electrical Engineering, Computer Science or a related field;
• Programming experience and knowledge of cyber security would be a plus;
• Possesses research background with ability to read and understand methodologies in research papers;
• A good team-player;
• Open to Fixed Term Contract

Senior Testing Engineer

As part of IME’s Photonics & Sensors Department, the candidate will take lead for the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices
• Manage photonics laboratory including facilities management, health and safety, equipment calibration, inventory and stocktake
• Take on procurement duties for laboratory equipment and consumables
• Prepare technical presentations for internal meetings

Qualifications:

• Bachelor’s degree in Physics, Electronic/Electrical Engineering or equivalent
• Experience in optical/photonics device testing
• Experience in experimental data acquisition and analysis
• Critical thinking and problem solving ability
• Strong skills in communication and providing technical presentations
• Values teamwork and fostering a collaborative spirit
• Skillset in programming or instrument automation is a plus

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to analysis of production lines to identify improvement, fostering cross-departmental collaboration for project implementation, and utilizing data analysis for management reporting. It involves optimizing automated production systems for efficiency, supervising personnel and machinery, and ensuring production targets are met.

Key Responsibilities

• Conduct in-depth analysis of production lines and promote cross-departmental cooperation to propose and implement improvement projects.
• Utilize data analysis for effective management reporting.
• Optimize and maintain automated production systems to enhance efficiency.
• Supervise personnel and machinery while driving the achievement of production targets.

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Computer Science, Industrial Engineering or engineering related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

We're seeking a skilled Quality Engineer to join our team, focusing on automated testing for scalable applications. As a Quality Engineer, you'll play a critical role in ensuring the reliability, performance, and scalability of our products.

Key Responsibilities

• Develop and execute comprehensive testing strategies to guarantee product quality, reliability, and scalability.
• Collaborate with cross-functional teams to validate product integration, performance, and uptime, ensuring seamless deployment and user experience.
• Design, develop, and maintain automated testing frameworks using Jest (TypeScript) for unit testing and Playwright (TypeScript) for integration and end-to-end testing.
• Implement API stress testing using Locust (Python) to identify performance bottlenecks and ensure system resilience.
• Analyze test results, identify trends, and deliver detailed reports to stakeholders, informing product development and optimization.
• Collaborate with developers, product managers, and stakeholders to create testable requirements, resolve defects, and ensure effective testing.
• Stay up-to-date with advancements in testing methodologies, tools, and frameworks, applying this knowledge to improve testing efficiency and coverage.

Requirements

Essential Qualifications

• 3+ years of experience in quality engineering, focusing on automated testing for scalable applications.
• Proficiency in TypeScript, with experience using Jest for unit testing and Playwright for integration and end-to-end testing.
• Strong knowledge of API testing tools and frameworks, with hands-on experience in Locust or similar performance testing tools.
• Proven ability to design efficient test cases, think critically about edge cases, and ensure code reliability.
• Excellent problem-solving skills, with the ability to communicate testing strategies, findings, and recommendations to technical and non-technical audiences.

Nice to Have

• Experience with applications leveraging generative AI technologies.
• Interest in data science, artificial intelligence, and machine learning

Responsibilities

●Collaborate with the sales/business development team to understand customer requirements and use cases, and identify how company's Robotics solutions can address those needs.
● Conduct product demonstrations and presentations to potential customers, showcasing the features and benefits of our robotics solutions.
● Develop proof-of-concept capabilities through ad-hoc software development and mechanical/electrical design with the help of internal engineering teams.
● Work closely with customers to understand their specific use cases and provide expert guidance on the integration of our robots into their operations.
● Create technical proposals and documentation tailored to customer requirements.
● Develop a deep understanding of company's Robotics' products and stay up-to-date with the latest advancements in the field.
● Act as a technical liaison between customers and our internal engineering teams, ensuring a smooth transition from presales to implementation.
● Support the sales team by participating in customer meetings, technical discussions, and addressing customer inquiries.
● Provide feedback to our product development team based on customer needs and market trends.
● Excellent presentation and communication skills.
● Ability to understand and address customer requirements and translate them into technical solution

Requirements:

● Degree with a focus on robotics, mechatronics, or related fields. Background in Computer Science/Electrical Engineering/Mechanical Engineering can be considered as well.
● Strong technical knowledge in their domain and the ability to work with customers.
● Should have at least one of the following:
○ Experience in Python or Javascript or C++. (or)
○ Experience in CAD software such as SolidWorks. (or)
○ Experience in mechatronics design such as working with Arduino or custom PCBs.

Plus Qualifications (Good to have)
● Experience with cloud computing platforms (e.g., AWS, Azure, Google Cloud).
● Familiarity with Docker, Jenkins, and other deployment tools.
● Exposure to backend system design to support robotics applications.
● Previous experience in a presales or technical sales role.
● Participation in robotics-related hackathons or competitions.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

AI Singapore (AISG) is a national AI programme launched by the National Research Foundation (NRF) to anchor deep national capabilities in Artificial Intelligence (AI).

The programme office is hosted by the National University of Singapore (NUS) and brings together all Singapore-based research institutions and the vibrant ecosystem of AI start-ups and companies developing AI products to perform use-inspired research, grow the knowledge, create the tools, and develop the talent to power Singapore's AI efforts.

We are looking for a Senior AI Engineer to join AI Singapore to lead the evaluation efforts in the Applied Research for Foundation Models team in AI Products.

Duties and Responsibilities

• Support the development of NLP products for Southeast Asian languages, with a focus on foundation models and linguistically-motivated approaches.
• Aid efforts on the fine-tuning, alignment and reasoning of large language models, including research, experimentation, implementation and data creation where applicable.
• Keep abreast of latest developments in NLP for low-resource languages, evaluation approaches etc.
• Collaborate with various parties both within and outside of Singapore on research and software development

Qualifications

• Masters or Ph.D. in Computer Science, Machine Learning, AI, Statistics, Mathematics, Engineering or Computational Linguistics
• Background in Linguistics is highly preferred
• Competency in a Southeast Asian language, or knowledge of multiple languages is strongly preferred
• Familiar with modern NLP models, including transformer architectures and large language models
• Familiar with fine-tuning and alignment techniques related to chain-of-thought generation and reasoning in LLMs
• Familiar with NLP evaluation methods and metrics
• Experienced in NLP model implementations based on PyTorch or Tensorflow/Keras, with some exposure to the setting up of end-to-end pipelines from data preparation to deployment
• Fluent in Python, but other languages such as Java, C++ or Javascript will be a bonus
• Have a good grasp of the fundamentals of Machine Learning
• Knowledge and experience in Software Engineering will be beneficial (e.g. Agile framework, Frontend/Backend development, Git)
• Some knowledge of DevOps (Docker, Kubernetes, CI/CD) will be a plus
• Team player with good communication skills and passion for technology

We're seeking a skilled Full Stack Software Engineer to contribute to the development and implementation of Litmus & Sentinel, our AI guardrails products. As a Full Stack Software Engineer, you'll play a key role in ensuring the responsible and ethical use of AI technologies.

Key Responsibilities

• Collaborate with cross-functional teams to design, develop, and integrate Litmus & Sentinel into products, ensuring seamless integration and high uptime.
• Contribute to the development of frontend and backend modules, leveraging the latest technologies and best practices.
• Conduct regular code reviews, performance evaluations, and technical assessments to maintain high standards of product quality and reliability.
• Work closely with stakeholders to understand requirements and translate them into technical solutions.
• Stay updated on industry trends, emerging technologies, and best practices in AI ethics and governance.

Requirements

Essential Qualifications

• 3+ years of full-stack software engineering experience in building scalable products.
• Experience with NextJS (TypeScript) and building API backend using frameworks such as NestJS (TypeScript) and FastAPI (Python).
• Exposure to cloud-based application development on AWS.
• Demonstrated ability to write efficient code and build software.
• Strong problem-solving skills and critical thinking.

Nice to Have

• Experience in generative AI-enabled applications.
• Interest in data science, artificial intelligence, and machine learning.

Job Summary:

As a Senior Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and Lead Piping Engineer and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties & Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existingdrawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project as directed by Piping Design Supervisor.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform thefunction inherent to Piping Key Person as designated by Piping Department Manager and Lead Piping Engineer.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager and Lead Piping Engineer.
• To carry out engineering support work during the construction phase of the project.

Education:

• Bachelor degree of any four years BS Engineering course preferably Mechanical Engineering or at least ten (10) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of ten (10) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, three (3) years of which in a supervisory capacity.

Skills:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good Knowledge of AutoCAD.
• Good knowledge of SP3D.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.

UnaBiz is the leading IOT company in Singapore. HQ in Singapore, with office in Taiwan, Japan, France, Spain and providing IOT solution globally.

Join the company that supplies solutions to established local and MNC like SIA, CBRE, JLL, Certis, Engie, and many more!

Job Descriptions:

• Collaborate with clients to understand their needs and tailor solutions that align with their business objectives.
• Stay updated on industry trends, competitor offerings, and emerging technologies in the smart workspace domain.
• Conduct product presentations and demonstrations that showcase the features and benefits of our smart workspace solutions.

Job Requirements:

• Candidate must possess at least Bachelor's degree in Electrical, Electronics, Software, or related field.
• Excellent communication and interpersonal skills, with the ability to present to diverse audiences.
• Strategic thinker with the ability to identify market opportunities .
• Demonstrated ability to negotiate and close deals with a customer-centric approach.
• Strong organizational skills and ability to manage multiple priorities effectively.
• Self-motivated and results-oriented, with a proactive attitude toward problem-solving.

Rewards:

• Competitive salary
• Free lunch in office provided
• Free transport to/from office

Job Responsibility

• Novel device layout development for BCD, RF technologies.
• Device model test structure generation and tape out preparation.
• Device pCell creation and FDK coordination.
• Device test structure data collection, analysis.
• Device manual bench for test key debug.

Capability

• Solid semiconductor device physics and analysis skill, experience on bipolar, power and RF device is a plus.
• Hands on experience on test key generation, familiar with commercial layout EDA tool, good script and coding skill is a plus.
• Good communication and team work skill.
• Self-motived and avid learner.

Qualification

• Bachelor's Degree and above preferred in physics, EE.
• Working Experience: hands on experience on layout work.
• Good English oral and writing skill.

Job Summary:

Drives the design chain value proposition by generating the greatest number of Xilinx design wins in technologies and registrations for customers engaged in Xilinx based product design resulting in growing business. Interface with the engineering departments of customers and suppliers. Performs a variety of product, technical and engineering functions including but not limited to: pre/post sales support, research, design and development.

Principal Responsibilities:

• Work with sales to explore new customer base which use Xilinx products.
• Deliver technical solutions / proposals and provide product presentations to customers.
• Provide technical support to customer which are using Xilinx products from start of development to design win closure.
• Provide technical training to customers
• conduct seminars and workshops
• Willing to travel
• Must be proactive and constantly striving to keep abreast of latest advances in Xilinx technology.

Job Level Specifications:

• Must be highly motivated and able to work independently
• Strong interpersonal and communication skills.
• Good team player
• Good analytic and problem-solving skills
• Integrity & Trust
• Excellent in time management.

Work Experience:

• Minimum 3+ years work experience in Programmable Logic based design / ASIC / Processors / GPU
• Proficient in VHDL/Verilog/C++ programming
• Experience working on AI solutions development using Caffe, Tensorflow, Keras, Pytorch frameworks is a strong plus.
• Experience working on systems in one or more of the following areas is a highly desired: Software Defined Radios, Wireless Communication Systems, Artificial Intelligence,.

Education and Certification(s):

• Bachelor's or Masters Degree in Engineering or equivalent.

• Design and Development:
  • Design, model, and prototype robotic systems, mechanisms, and components using CAD software (e.g., SolidWorks, AutoCAD).
  • Develop control systems for robotics, integrating sensors, actuators, and motors into functional designs.
  • Create detailed technical specifications, design documents, and test plans for robotics systems.
• Testing and Optimization:
  • Conduct performance testing of robotic systems and components to ensure they meet functional requirements.
  • Analyze test results, identify areas for improvement, and refine designs for optimal performance.
  • Troubleshoot and resolve design, mechanical, and electrical issues.
• Collaboration:
  • Collaborate with electrical, software, and manufacturing engineers to ensure seamless integration of robotic components.
  • Participate in brainstorming sessions and design reviews to innovate and improve robotic designs.
• Research and Innovation:
  • Stay up-to-date with the latest trends and advancements in robotics, automation, and related technologies.
  • Apply cutting-edge design principles and technologies to create high-performance, cost-effective robotics solutions.
• Documentation and Reporting:
  • Document design processes, test results, and modifications for future reference and continuous improvement.
  • Provide regular progress reports and presentations to management and stakeholders.

We are seeking a highly skilled QA Engineer to join our team, with experience in both the oil & gas and semiconductor industries. The successful candidate will play a crucial role in ensuring that our products and processes meet the highest quality standards and comply with industry regulations

Job Description

• Quality Assurance: Oversee and manage quality assurance processes to ensure compliance with industry standards and company policies in both oil & gas and semiconductor fields.
• ISO Audits: Conduct internal and external ISO audits (including ISO 9001) to maintain certifications and ensure adherence to ISO standards.
• Process Improvement: Identify areas for improvement, develop corrective actions, and implement solutions to enhance quality and operational efficiency.
• Documentation: Maintain comprehensive records of quality control procedures, audit findings, and corrective actions.
• Training: Provide training and support to staff on quality standards, ISO procedures, and industry best practices.
• Collaboration: Work closely with other departments to integrate quality assurance into all processes and projects.

Job Requirement

• Education: Bachelor’s degree in Engineering, Quality Management, or a related field.
• Experience: Minimum of 5 years of experience in quality assurance within the oil & gas and semiconductor industries.
• ISO Expertise: Proven experience in conducting ISO audits, particularly ISO 9001.
• Skills: Strong analytical skills, attention to detail, and proficiency in quality management tools and software.
• Certifications: Certified ISO Lead Auditor or similar certification is preferred.
• Communication: Excellent written and verbal communication skills.

We're seeking a seasoned Senior Software Engineer to design, build, and integrate complex software components. As a Senior Software Engineer, you'll play a key role in delivering quality solutions and harnessing emerging technologies to drive business value.

Key Responsibilities

• Design, develop, and maintain complex software components, adopting design thinking and customer-oriented approaches.
• Build prototypes and design system architectures to demonstrate technology opportunities.
• Collaborate with cross-functional teams to deliver enterprise engineering products in a fast-paced environment.
• Provide technical consultancy and expertise in the systems development process, contributing to defining technical specifications and configuring solutions.
• Stay updated on emerging technologies, such as Artificial Intelligence, to drive business value and enhance service experience.

Requirements

Essential Qualifications

• Relevant qualifications in Computer Science, Information Systems, Computer Engineering, or related fields.
• Good knowledge of Agile software development, DevOps, and cloud technologies.
• Experience in modern web and application technologies (e.g., Nuxt JS, Vue JS, Node JS, Next JS).
• Excellent analytical and problem-solving skills.

Nice to Have

• Past experience working with Ruby on Rails.
• Experience in architecting and developing solutions to complex and ambiguous problems.
• Strong communication and interpersonal skills.
• Past work experience in large software teams.

We're seeking a skilled Engineer, Quality Assurance to join our team in Singapore. Reporting to the Engineering Manager, you'll play a critical role in ensuring the quality assurance aspects of our technical areas.

Key Responsibilities

• Participate in our shift-left testing process and entire Software Testing Life Cycle (STLC) to ensure high-quality products.
• Collaborate with Product Managers to define, test, and validate product requirements.
• Design, execute, and automate tests for web applications and backend APIs, ensuring comprehensive coverage.
• Produce detailed test reports and serve as the sign-off authority for feature releases.
• Work closely with Development teams to identify and resolve issues, ensuring seamless collaboration.
• Contribute to the evaluation and adoption of testing automation frameworks.
• Mentor junior QA engineers, sharing expertise and promoting growth.

Essential Qualifications

• Bachelor's or Master's degree in Computer Science or a related field.
• Excellent communication skills, with the ability to explain technical concepts to diverse audiences.
• 2-5 years of experience in web application testing and automation.
• Strong foundation in Software Engineering concepts and STLC life cycle.
• Ability to write test plans and test strategy documents.
• Good knowledge of API and Web testing, Networking, and Operating System concepts.
• Strong troubleshooting, debugging, and analytical skills.

Preferred Qualifications

• Experience with testing automation tools.
• Background working in product companies.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Research Engineer position in the Department of Materials Science and Engineering at National University of Singapore (NUS).

With a strong focus on industrial projects, we are developing our exciting technologies beyond the lab scale. We are seeking a talented and experienced individual with expertise in material chemistry and chemical engineering to join us.

As a Research Engineer, you will contribute to industry project focusing on scaling up our electro-metallurgical battery recycling technology from lab to pilot scale. Your major focus will be developing a process to synthesize precursor materials (pCAM) with extracted metals from spent battery materials.

• Lead pCAM synthesis processes at the R&D and pilot scale by working in collaboration with engineering team.
• Able to establish process design and synthesis rules to obtain precursors with optimal composition, interfacial properties, crystal structure, particle size, morphology, and electrochemical characteristics.

Qualifications

1. Bachelor or Master in Materials science and engineering, Chemical engineering, Material chemistry, or any relevant field.
2. Minimum of 2 yrs experience in MHP, pCAM synthesis (precipitation, crystallization).
3. Prior experience in process development and piloting new technologies is highly preferred.
4. Experience with material characterization techniques like SEM/EDS, ICP, XRD, FTIR.
5. Strong analytical skills and experience in data analysis and interpretation.
6. Highly motivated, detail-oriented, and able to work independently as well as part of a team in a fast-paced academic environment

Role Summary

The role is responsible for delivering and managing cloud security and endpoint security services, assessing policies and rules, safeguarding SaaS applications, data and endpoints. You’ll collaborate with colleagues supporting network and architecture assessment, threat modeling, vulnerability assessment, and security operations. This position supports the Enterprise Security Transformation practice and is focused on engineering secure methods of utilizing cloud infrastructure services and software to improve the overall security posture. Cloud security engineers may instruct other teams on proper coding methods. They may also investigate, create, and recommend innovative technologies or other methods that will enhance the security of cloud-based environments.

Roles and Responsibilities

• Protects system by defining access privileges, control structures, and resources.
• Safeguards information system assets by identifying and solving potential and actual security problems.
• Recognizes problems by identifying abnormalities; reporting violations.
• Determines security violations and inefficiencies by conducting periodic audits.
• Consolidate root cause analysis of past pentest results.
• Upgrades system by implementing and maintaining security controls.
• Require periodic after-hours/weekend support.
• Any other duties assigned by the Team Lead/Solution Architect.

Job Requirements

• 3 years experience in AWS Cloud Security, Security Hub, Guard Duty, Inspector, etc.
• Strong understanding of SSDLC and security frameworks.
• Knowledge in OWASP Security Standards.
• In-depth knowledge of architecture, engineering, and operations of at least one enterprise IDS/IPS/SIEM platform.
• Hands on experience with vulnerability scanning and pentesting tools.
• Hands-on experience analyzing high volumes of logs, network data (e.g. Netflow, FPC), and other attack artifacts in support of incident investigations.
• Experience with identity and access management architectures and solutions including AD, RBAC, SSO, identity lifecycle management.
• Experience in IAM, secrets management, encryption technologies, SaaS services hardening, Kubernetes and container security
• Experience with Linux administration, shell scripting, and open-source security tools.
• Knowledge of security best practices in hardening and protecting cloud environments, networks, servers, endpoints, applications, and databases.
• Certifications in OSCP / CISSP / SANS / Other relevant security certifications.
• Excellent interpersonal skills, team player and independent worker.
• Ability to operate in a fast-paced work environment and deliver under pressure.
• AWS certification will be an added advantage.

This is for a year contract subject to renew.

Responsibilities

· Assure sites are properly stocked with test tools. And test tools are periodically calibrated per AT standards.

· Participate in the Factory Acceptance Testing in the lab and preparation of FAT plan.

· Lead site commissioning activities of radio-based train control systems, including Functional tests and System Acceptance Test (SAT) and System Integration Test (SIT) and ensure that all interfaces to the signalling system are appropriately tested.

· Lead test and commissioning of the On-Board, Wayside, and Radio system system

· Liaise with Engineering / supplier for any design changes and modifications necessary subject to test results

· Record, report, and endorse test results when appropriate.

· Ensuring that testing activities are carried out in timely, logical and cost effective manners.

· Work with Engineering team for the evolution of drawings (ie. mark-up, change order, and transmittals) until the as-build stage.

· Develop productive relationships with client’s teams to ensure successful handover and post-implementation operation of projects.

· Plan and schedule site ITC activities in accordance to the rolling programme, that align with the master programme

· Produce red correction based on the released drawings and correct and rectify failures occurs during T&C phase.

· Raise NCR(None Confirmity) / MNCR (Material None Confirmty) / Fault report during fault found.

· Consolidate / track the following; records, software, hardwares, field changes.

· Implement field change orders

· Prepare installation and test and commissioning procedures / method statement for the communication-based train control system

· Verify the quality of installation works and raise concern if there is a quality issue.

· Troubleshooting, analysis in case of any issues encountered.

· Able to have a good collaboration with the vehicle testers and wayside testers during interface testing.

· Lead / Support the department for the payment milestones related to the test and commissioning

Requirements

·Bachelor’s degree in engineering or related field.

·Minimum 3 years of relevant experience.

• Operate precision CNC turning/milling machine
• Perform CAD/CAM programming
• Interpret Engineering Drawings and Feature of Control Symbols
• Simple setting up of work piece and tooling set up
• Check and maintain machinery daily to ensure functionality
• Able to handle 8" to 12" chuck CNC Turn/Mill Machine, Fanuc control

Requirement

• Proficient in Quality Consciousness with the ability to meet productivity goals
• Must have good interpersonal communication skills and a positive team attitude
• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre

• Manage Field Service Representatives, the regional schedule as well as the local Service organization business goals and objectives
• Work closely with his team of field service staff in Singapore and beyond, to schedule, dispatch & coordinate their work assignments, and resolve scheduling conflicts
• Make data-driven decisions based on reporting from the company’s CRM system (C4C)
• Disseminate information to the field and maintain intradepartmental communication through written correspondence and regular conference calls
• Ensure compliance of field service staff with safety and performance standards, company and department policies, as well as business objectives
• Develop service quality standards, skills certification criteria, performance objectives and metrics related to field service
• Monitor staff performance and initiate correction action to resolve performance deficiencies through coaching, training, motivating, and disciplining
• Travel with field service representatives on a periodic basis to evaluate and improve performance
• Solicit customer feedback on SLM Solutions service performance through regular telephone interviews, e-mail correspondence and customer site visits
• Evaluate service requirements of the install base and maintain regional assignments and proper resource allocation to ensure satisfactory customer response
• Maintain complete and accurate records of field service activities
• Analyze field service performance data,produce status and summary reports as required
• Establish policies and procedures for producing effective service response and problem resolution for SLM Solutions customers
• Provide direction to field service staff to ensure complete implementation and compliance with department processes

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Role responsibilities

• Be part of the team to architect and bring up the new service infrastructure for autonomous prime mover (APM) business.
• Architect and develop large scale IoT system to track live operation data for fleet management to support live fleet operations and monitorings, Provide best data model and services for global route optimization, live monitoring, live map update, vehicle configuration, vehicle maintenance.
• Architect and develop other internal serivces to facilating R& D process.
• Bring up universal auth integration and best security practice.
• Provide common client SDK for backend services.

Required experience

• Bachelor’s or master's degree in computer science or related relevant field.
• 5+ years' experience in backend implementation and .
• Experience with RESTful API framework in Python, Java, or Golang.
• Experience with high performance backend implementation, profiling, and monitoring.
• Experience with data modeling with relational database and NoSQL database.
• Experience with docker, K8s or other containerization techniques.
• Experienced with cloud services.
• Experience with proper CI/CD setup.
• Excellent communication skills.

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!

Job Description:

• Facilitate execution of project plans and utilise appropriate methods and tools to track and drive progress of projects against set plans and timelines
• Collaborate and communicate effectively with relevant internal and external stakeholders related to the projects
• Track both internal and external quality project deliverables against project schedules
• Perform dimensional and geometrical measurements and inspection of manufactured components for evaluation of acceptability
• Approve parts for next process & data analysis.
• Review inspection result or data in accordance with inspection and test plans.
• Collate information for product and process quality metric management reports and provide summary statement to customers.
• Assist with various stakeholder to classify issues by implementing corrective and preventive actions (CAPA) plans
• Manage Internal and External CAR analysis
• Manage Sub-con NC parts investigation
• Identify opportunities and propose improvement on QMS related process & procedures within own work area and assist with the implementation of workflow improvements to improve efficiency
• Identify, diagnose and resolve process related issues by applying failure analysis, FMEA, 8D or SPC methodology
• Update and present QA monthly performance reports to internal stakeholder.

Requirements:

• Possess at least ITE/Diploma in Engineering (Mechanical), Engineering (Precision Engineering) or equivalent.
• Familiar with manufacturing process, precision engineering and quality assurance environment.
• High mix low volume work environment
• Independent and task prioritization
• Knowledge on Microsoft office software.
• Basic knowledge on ISO 9001.
• Knowledge on mechanical drawing, GD&T.
• Knowledge in CAPA / 8D / Root cause analysis
• Able to use basic measuring instruments like caliper, micrometer & profile projector.
• Able to do OGP smart scope program independently.
• Good email communication skills.