Key Responsibilities:

• Develop hardware for switched-mode power supplies and battery chargers.
• Perform topology selection, circuit design, component selection, and power loss calculations based on customer specifications.
• Design schematic and PCB layout based on product design.
• Craft test and verification plan to ensure product design can comply with customer requirements.
• Ensure the product can meet safety and certification requirements.
• Resolve issues with design promptly based on customer and internal feedback.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders to ensure successful delivery of the product.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, PhD, or researcher with Min. 3 years experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Experience designing CC/CV charger systems and working on power supplies with power levels >500W.
• Working experience in schematic design and PCB layout software, e.g. OrCAD, PADS, or other equivalent software
• Familiar with simulation tools, e.g. LTspice, PSIM, or other equivalent software
• Acquainted with test equipment such as AC/DC source, electronic load, oscilloscope, and soldering iron.
• Candidates with the below skillsets will be an added advantage.

1. Experience in volume manufacturing.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Key Responsibilities:

• Develop hardware for switched-mode power supplies and battery chargers.
• Perform topology selection, circuit design, component selection, and power loss calculations based on customer specifications.
• Design schematic and PCB layout based on product design.
• Craft test and verification plan to ensure product design can comply with customer requirements.
• Ensure the product can meet safety and certification requirements.
• Resolve issues with design promptly based on customer and internal feedback.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders to ensure successful delivery of the product.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, or PhD with Min. 5 years’ experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Experience designing CC/CV charger systems and working on power supplies with power levels >500W.
• Working experience in schematic design and PCB layout software, e.g. OrCAD, PADS, or other equivalent software
• Familiar with simulation tools, e.g. LTspice, PSIM, or other equivalent software
• Acquainted with test equipment such as AC/DC source, electronic load, oscilloscope, and soldering iron.
• Candidates with the below skillsets will be an added advantage.

1. Experience in volume manufacturing.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Summary:

• Basic salary up to $4500
• Commission + Variable bonus
• Transport allowances or reimbursement
• 5 days work week @ 8.30 - 5.30pm
• Location: Tai Seng (walkable from MRT station)
• Opportunity to travel overseas
• Sales or engineering experience / background

Key Responsibilities:

• Identify and approach potential clients via cold calling, proposal emails, networking and etc
• Establish and maintain relationships with clients to foster long-term business
• Prepare quotes and proposal tailored to client's needs
• Use knowledge of products and services to recommend solutions
• Coordinate with internal departments to resolve operational issues
• Address customer concerns related to products
• Other ad hoc duties

Key Requirements:

• Min Nitec in Electrical / Electronic engineering or equivalent
• 2 year of sales / engineering experience
• Willing to travel overseas

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job responsibility:

• Setup, commissioning and decommissioning of equipment
• Troubleshoot and resolve technical issues with semiconductor equipment
• Perform preventive maintenance on equipment
• Conduct training for customers’ engineers
• Provide technical support to maintain high level of customer satisfaction

Requirements:

• Diploma in Electrical / Electronics / Mechanical Engineering
• Excellent analytical skills with the ability to trouble-shoot and resolve technical issue
• Able to read electrical and mechanical diagrams
• Responsible, Positive Attitude and able to work independently with minimum supervision
• Prior experience working in semiconductor industry would be an added advantage
• Fresh Polytechnic Diploma holder are welcome to apply

Summary:

• Construction industry
• Junior role up to $3800
• Senior role up to $5000
• Performance bonus on a yearly basis
• Location: AMK / YCK / Central
• 5 days work week
• Experienced in ACMV & LTA / SMRT

Key Responsibilities:

• Perform engineering design, calculations, planning, and tender preparation / evaluations
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaise with clients, project managers, architects, contractors about the projects
• Assist in resolving any technical problems faced during project design and / or construction stages
• Any other required duties as required by the Project Team

Key Requirements:

• At least 3 years experience in relevant field
• Must have ACMV, LTA / SMRT experience

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Key Responsibilities:

• Work along with the development teams to onboard the Project onto AWS Platform
• Guiding the continuous integration, continuous deployment, continuous testing & continuous monitoring
• Work closely with the development team and operation team to ensure project delivery and maintain compliance standards.
• Set up, deploy, and maintain scalable, high-availability systems.
• Perform and automate provisioning and security hardening of systems.
• Set up and maintain CI/CD, automated testing, development, and delivery environments.
• Writing scripts/programs for service monitoring and health checks of systems
• Day-to-day monitoring, backup, deployment, and maintenance of systems

Requirements:

• Bachelor's or Master’s Degree in information engineering, information management or computer science
• Minimum 5 years in the software development industry or server infrastructure setup
• At least 3-years’ experience working closely with infrastructure, Experience in Linux, Windows
• Network troubleshooting is a plus.
• Good hands-on experience in using AWS Cloud
• Experience with IAC / config management tools (Terraform, Ansible, Puppet etc.)
• Good understanding of hardware infrastructure systems (network switches, firewalls, router etc.) and Linux operating system
• Good understanding of DevOps Principles and practices
• Experience with cloud orchestration, configuration management and auto-scaling techniques
• Experience on building and developing CI/CD pipeline and workflow.
• Cloud & DevOps Certifications e.g., AWS Solution Architect, DevOps is a plus.

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Project Overview

We are seeking a Research Engineer to systematically organize knowledge for a project on “Designing human-AI teams.” The project is part of a five-year research program on "Mens, Manus and Machina—How AI Empowers People, Institutions and Cities in Singapore (M3S)."

Successful applicants for this position will have the opportunity to work on a cutting-edge, interdisciplinary project that aims to dramatically rethink how people and AI systems will work together in the future. To do this, the project seeks to build a strong scientific foundation for how AI can augment (as opposed to replace) humans.

An important goal of the project is to develop a rich ontology of activities that can be performed by human-AI teams. Like categorizing the plants and animals on a little-explored continent, the work will involve cataloging many (a) activities and (b) possible human-computer processes for performing these activities.

To do this, we will develop knowledge graphs that include (1) descriptions of many different types of activities and processes, and (2) classifications of these descriptions into multi-dimensional taxonomies that range from very general types of activities to very specific ones.

These knowledge graphs will then be used to automatically generate promising ways of combining humans and AI systems to perform different tasks. In the long run, we believe these tools will help rapidly (a) identify use cases for new AI capabilities, (b) specify effective processes and task allocations to humans and computers in a given situation, and (c) identify innovative ways to combine people and AI to solve business and societal problems.\

The T6 team is led by distinguished scholars, including Profs. Thomas Malone, Charles Fine, Armando Solar-Lezama, Jinhua Zhao, and Abdullah Almaatouq from MIT; Prof. Marcelo Ang from the National University of Singapore; and will be assisted by Prof. Archan Misra from Singapore Management University.

Responsibilities

• Developing descriptions of current or potential activities and processes based on various sources such as: interviews, field studies, literature reviews, and generative AI systems (such as ChatGPT).
• Making editorial decisions about what content from these sources to include in the knowledge graphs and how to present and organize this knowledge clearly.
• Collaborate with the project team and other researchers to design, implement, and evaluate research projects.
• Perform other duties as needed.

Requirements

- Bachelor’s or Master’s degree.

- Excellent communication and collaboration skills.

-Ability to systematically organize knowledge in structured ways that are logical, comprehensive, understandable, and conceptually elegant.

-Skilled in software development, good writing ability, statistical analysis, and social science methodologies such as experimental design or ethnographic observation.

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notified.

Salary: $3,400 - $3,800

Location: Ang Mo Kio/Yio Chu Kang

Key Responsibilities:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects and contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Key Requirement:

• Graduate in Electrical/Mechanical Engineering.
• Advanced skills using company software
• 3 - 5 years experienced
• Experienced in ACMV & LTA/SMRT
• Soft skills including a positive attitude, flexibility and conflict resolution

WhatsApp me wa.me/6585125305 for a prompt response to your enquiry!

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please by notified that only shortlisted candidates will be informed.

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Product area

Google's network provides services to millions of Internet users around the world. Our metros are on the edge of our network where Google connects to its users. The Network Team is responsible for operating that network reliably and at scale. Our team owns the full life cycle of all space, power, and network assets in all of Google’s data centers and metro points of presence globally. From the foundation, we are involved from site acquisition to construction and are accountable for what space and power is delivered. We're involved in every facet of network delivery from architecture and design to installation, configuration, activation, and commissioning.

Job description

As a Network Implementation Engineer, you will be the initial point of our efforts to execute deployment, maintenance, and operations of private data networks worldwide. You will work with Technical Program Managers, Network Engineers, Design and Infrastructure Engineers, Field Engineers within Google, as well as construction and telecommunications vendors and contractors, all to position your team and organization for success.

You will facilitate faster, better, and more efficient, positive outcomes for the business and our customers. Your objective will be to build the world’s most reliable, cost-effective and scalable network to support all of our current and future customers and users globally.

Qualifications

Job responsibilities

• Manage oversight and Quality Assurance (QA) of installation technicians for rack, stack and installation of networking equipment.
• Test and commission routers, optical transport equipment, and other network devices in new and existing network nodes across Google's global network.
• Generate implementation plans and provide technical leadership and guidance during deployment activities.
• Work with project management, network engineering, and rest of the Engineering team to identify in advance potential issues in network installations, including in the areas of facility power Alternating Current/Direct Current. (AC/DC), cooling, security/access, rack layout, and cable management.
• Own network documentation, updating, and maintaining network drawings and plans.

Minimum qualifications

• Bachelor's degree in Network Engineering or Telecom Engineering, a related technical field, or equivalent practical experience.
• 3 years of experience in Dense Wavelength Division Multiplexing (DWDM) or Transmission Control Protocol/Internet Protocol (TCP/IP) or system design operations methodology.

Preferred qualifications

• Experience working with field operation technicians, engineers, contractors, or vendors in a telecommunications environment.
• Experience in collaborating across multiple levels and functions.
• Experience in directing field operation technicians, engineers, contractors or vendors in a telecommunications working environment.
• Ability to engage/influence tactical decision-making.

Key Responsibilities:

• Work along with the development teams to onboard the Project onto AWS Platform
• Guiding the continuous integration, continuous deployment, continuous testing & continuous monitoring
• Work closely with the development team and operation team to ensure project delivery and maintain compliance standards.
• Set up, deploy, and maintain scalable, high-availability systems.
• Perform and automate provisioning and security hardening of systems.
• Set up and maintain CI/CD, automated testing, development, and delivery environments.
• Writing scripts/programs for service monitoring and health checks of systems
• Day-to-day monitoring, backup, deployment, and maintenance of systems

Requirements:

• Bachelor's or Master’s Degree in information engineering, information management or computer science
• Minimum 3 years in the software development industry or server infrastructure setup
• At least 1-year of experience working closely with infrastructure, Experience in Linux, Windows
• Network troubleshooting is a plus.
• Good hands-on experience in using AWS Cloud
• Experience with IAC / config management tools (Terraform, Ansible, Puppet etc.)
• Good understanding of hardware infrastructure systems (network switches, firewalls, router etc.) and Linux operating system
• Good understanding of DevOps Principles and practices
• Experience with cloud orchestration, configuration management and auto-scaling techniques
• Experience on building and developing CI/CD pipeline and workflow.
• Cloud & DevOps Certifications e.g., AWS Solution Architect, DevOps is a plus.

Summary:

• Quality control engineer (manufacturing company)
• Basic salary up to $4500
• Performance bonus
• 5 days work week @ 8.30 am - 6.00pm
• Location: Serangoon

Key Responsibilities:

• Implement procedures to ensure consistent product quality during the manufacaturing process
• Work with process engineer & engineering team on QC requirements
• Regularly inspecting the materials, components and finished products
• Proper record of the inspection and test results
• Work with QA, process and product team on corrective action with quality issues
• Assist with in-process audit and FQC audit
• Other relevant ad hoc duties

Key Requirements:

• Min Diploma in manufacturing / quality engineering
• Min 1 year of relevant experience in electronics products / manufacturing environment
• Knowledge of ISO 9001, 14001, 13485, 45001, FDA requirement

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Design and synthesis of organic functional materials with persistent luminescence
• Design and synthesis of organic functional materials for theranostic applications
• Design and synthesis of nanomaterials for theranostic applications
• Cellular and bacteria studies to evaluate fluorescent probes
• Responsible for conducting high quality research, writing academic papers and collaboration with other researchers

Job Requirements

• Bachelor degree in Chemistry, Materials, Polymers and Chemical Engineering.
• Good knowledge in synthesis and characterization.
• Have good publication record and relevant research experience.
• Highly motivated and independent, strong problem-solving skills
• Good written and spoken communication
• Open to fixed-term contract

Responsibilities

Excellent execution on assembly process for 1st NPI success and smooth transfer process from NPI to HVM

• Excellent execution of the qualification of NPI products / packages build that proliferate from the pilot products and packages according to planned timeline
• Full responsible on support NPI business process with process TRA, POS, PFMEA/QCP, risk mitigation and documentations.
• Deliver BIC yield and cost on product NPI with integration of DFx BIC package solution, process guideline and design rules.
• Collaboration with multi-functional team from NPI to LVM/HVM process transfer. On-time execution of NPI Customer samples and Engineering Samples build for new products and packages

SME Process Owner Responsible for Continuous Improvement on Process Yield, Defect Elimination and Process Characterization

• Process owner to perform on-time detection with data analysis for process yield improvement. Lead the defect elimination and continue improvement action, with problem solving methodology, statistical analysis and integration solution decision.
• Process owner to develop process recipe for BIC UPH, conducting process characterization to define process parameters and boundary.
• Continuous develop in depth assembly process technical knowledge, well understand process capability/tolerance//spec limit/CpK, and apply key tools PFMEA/QCP/APC/FDC/Alarm on assembly processes Cz/Development/NPI.
• Global leader for cross team collaboration on network BKM, process recipe spec and recipe standardization/conversion.

Technology enablement and development – Process, Material, Equipment

• Participate and support Product Roadmap, to enable key process capability and technology development to ensure packaging solution is ready prior 1st Qual Silicon deliver.
• Frequent engagement with equipment and material supplier (at least interval of monthly or daily/weekly for process issues)
• Collaboration with Supplier and involvement Supplier Roadmap (Material/Equipment/OSAT), to understand market trends and competitor’s direction, ensure key process technology and capability enablement is in-line.
• Frequent review and participant Competitor Analysis, to understand market trends and competitor’s technology/capability boundary
• Engage and follow PDE business process (TGR, TORB, KEG interlock) for new technology qualification, alignment and safe launch

Teamwork and General expectation

• Trainer/Buddy/Mentor for new team members, build effective relationships within team and cross team (peers, counterpart)
• Regularly review data and direction with supervisor. Demonstrate sound data analysis and judgment. Present reports and findings with appropriate conclusions, recommendations and decision making.
• Develop, or coordinate development of, training materials for existing/new process
• Safety Identify and promptly report hazards, follow safety procedures and area work rules including proper PPE, lockout and chemical safety.

Qualification

• Bachelor or Masters in Electrical Engineering, Materials Science, Chemical Engineering, or related field. A PhD is a plus.
• 1-3 or more years of experience in Semiconductor Manufacturing, Process & Equipment Engineering and/or New Product Introduction.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Be able to comfortably work across organizational boundaries and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Organized, meticulous, and strong focus on results.
• Excellent analytical skills
• Excellent communication and written skills

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

WHO YOU’LL WORK WITH

Apparel and Accessories Costing Team is a function of Apparel and Accessories Supply Chain, driving costing model that is transparent, fair and fully digital across apparel and accessories. The team provides predictability, scalability and benchmarking of Nike manufacturing costs that improves end to end margin planning, cost mitigation and sourcing decisions. This role reports to Director, Apparel/Acc Costing, N Asia based in Shanghai

WHO WE ARE LOOKING FOR

The ideal candidate should have relevant experience and knowledge in Apparel/Accessories industrial engineering, costing, product construction, or production management. Good in product complexity analysis, workflow study and data management skills. Have good communication in technical manufacturing concepts with other stakeholders. A self-starter with ability to work independently and meet deadlines. Willing to learn and with “can-do” attitude. And below qualifications:

• Diploma or above. Minimum of 2-year work experience
• Certificate of General Sewing Data (GSD) and relevant knowledge in SAM (Standard Allowed Minute) /SMV (Standard Minute Value) analysis.
• Able to communicate in verbal and written English. Mandarin is a plus.
• Computer skills: Microsoft Excel, Word, PowerPoint, and Outlook.

WHAT YOU’LL WORK ON

As a Cost Engineer, this role will work closely with ACE managers and directors in optimizing the cost models in Nike, creating SAM/SMV database, managing the product cost analysis from manufacturing perspective, and driving cost improvement with best practice sharing. She/He will closely collaborate with both Nike internal and external stakeholders including factory partners to understand, collect and analyze the cost-related information, and then align the standard and processes.

Core Responsibilities include:

• Product Cost Engineering Analysis

1. Assist the Director/IE (Industrial Engineer) managers to design and enhance the product cost review tools (e.g. Product Standard Minutes - SAM/SMV database, Cost Matrices & Calculators) for quick and accurate product cost assessment.
2. Analyze the product cost based on style constructions, factory cost structure and other related cost factors e.g. Manufacturing efficiency during product development.
3. Liaise with Factory Partners (mostly their costing or IE teams) in case of critical gap (e.g. in SAM/SMV or other related production process) vs their quotation. Support the product development to resolve the costing challenges from product perspective.

• Update Nike cost model

1. Collect, review and analyze manufacturing information from factories or market research (machines, workflow, output/efficiency…) for setting the reasonable and sustainable cost models.
2. Track and report cost drivers (e.g. SAM/SMV, Efficiency/Productivity) Study the impact and drive the review with the key functions including factory partners, Manufacturing Engineering team and Product creation team.

• Improve factory cost performance

1. Collect and analyze production data. Report the factory performance through scoring Manufacturing Index or other measurements.
2. Study and share the best practice to improve the cost performance of factories. Regularly review and update any related cost benchmarks.

(a) Responsibilities:

The candidate is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle including the test

planning, and analyzing business and system requirements.

The candidate will also be responsible for:

• Preparing the test environment, designing, and developing the test cases.

• Preparing the test environment, and executing the test procedures.

• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.

• Create traceability to requirements, analyze gaps and address them.

• Logging and tracking defects to closure

• Conducting test reviews with internal and external stakeholders.

• Perform root cause analysis for production and user acceptance defects, and address test gaps to ensure test efficiency.

• Develop design documents and user manuals that would effectively describe and provide clear instructions on the test automation solution to the end users including testers and stakeholders.

(b) Qualifications & Requirements:

• Tertiary qualification in Information Technology or Engineering

• At least 3 years’ relevant experience in executing testing and

developing test automation solutions involving devices (UI-based

or embedded) and/or back-office systems with familiarity on the full

system development lifecycle from requirement, development, to

testing and deployment;

• Good written and verbal communication skills;

• Able to work well both independently as well as in a team;

• Certification in software testing preferred;

• Experience in micropayments Fare Collection systems using Smart Cards and in diverse test execution phases (System Integration Testing, User Acceptance Testing, Performance testing) would be an advantage;

Job Description

• Support the production of scalable and optimised AI/machine learning (ML) models
• Focus on building algorithms for the extraction, transformation and loading of large volumes of realtime, unstructured data to deploy AI/ML solutions from theoretical data science models.
• Run experiments to test the performance of deployed models, and identifies and resolves bugs that arise in the process.
• Work on functional design, process design (including scenario design, flow mapping), prototyping, testing, training, and defining support procedures
• Work in a team setting and apply knowledge in statistics, scripting and programming languages required by the firm.
• Work with the relevant software platforms in which the models are deployed.
• Serve as liaison between stakeholders and project teams, delivering feedback and enabling team members to make necessary changes in product performance or presentation.
• Coordination: Collaborate with the Cloud Centre of Excellence and Infrastructure teams to address project needs.

Summary:

• Basic up to $6000 (Senior), $5000 (Junior)
• Performance bonus
• Location: AMK / YCK / Central
• 5 days work week
• Familiar with ACMV
• Career advancement & stability

Key Responsibilities:

• Manage and lead the electrical team
• Perform engineering duties: design, engineering calculations, planning, tender and etc
• Perform testing and commissioning of ACMV electrical system
• QA/QC
• Resolve any technical issue during any stage of the project
• Liaise with clients, project manager, contractor and etc
• Ensure the team follows all electrical codes and standards
• Other relevant ad-hoc duties

Key Requirements:

• Min 5 years of relevant experience in Construction Electrical field, including testing and commission
• Familiar with ACMV

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Key Responsibilities:

• Partner with multidisciplinary teams to craft, build, and launch top-tier software applications, spanning mobile and web interfaces, as well as corresponding backend systems.
• Advocate for and implement industry-leading software development methodologies, including collaborative coding, peer review, and test-driven development.
• Spearhead technical forums, design system architectures, and coach team members to cultivate expertise and excellence.

Requirements:

• A minimum of 5 years of experience as a full-stack developer, with a demonstrated history of delivering high-performance, scalable solutions.
• In-depth knowledge of modern web development frameworks, including ReactJS, NextJS, TypeScript, and Kotlin/Java.
• Skilled in designing, implementing, and managing continuous integration and delivery pipelines, with expertise in deploying applications on cloud-based platforms such as AWS.
• Familiarity with database migration tools and techniques is a plus.
• Experience working in Agile/Scrum environments is also desirable.
• Excellent verbal and written communication skills, with the ability to clearly articulate complex technical concepts.
• A self-driven and proactive individual with a strong passion for innovation and continuous improvement.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

http://www.dadaconsultants.com/

—------------

EA License number : 20S0283

EA Personnel : R1332294

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Key Responsibilities:

• Team Leadership: Manage and mentor a development team of 5 – 10 members.
• Project Management: Provide accurate estimates and oversee project deliverables .
• Frontend Development: Lead front-end development using Node.js, JQuery, Bootstrap, and related tools
• Technical Expertise: Utilize Java, Python, Groovy & Grails, Spring MVC, Hibernate, and other frameworks for full-stack development.
• Banking Experience: Develop secure and compliant banking-related applications.
• Quality Assurance: Conduct code reviews and maintain coding standards.
• Consulting: Propose technical solutions to client challenges and improve system efficiency.
• Product Demonstrations: Present project outcomes to clients and stakeholders.

Qualifications and Skills:

• Experience: 10+ years in software development projects, with a strong focus on banking solutions.
• Leadership: Proven ability to lead development teams of 5 - 10 members.
• Banking Expertise: Hands-on experience with banking systems, processes, and compliance.
• Technical Skills: Proficient in Java,Python, Groovy & Grails, Spring MVC, Hibernate, and frameworks like Node.js
• Frontend Development: Expertise in JQuery,Bootstrap, BackboneJS, and related tools.
• Database: Experience with Oracle,PostgreSQL
• Communication: Strong ability to manage client expectations and liaise effectively.

Job Description:

1. Oversees projects management and implementation;
2. Codify implementation design into documented for end user's record;
3. Conduct training and presentation for team members and end-users;
4. Provide technical testing or support to pre-sales engineer/customer on the network setup;
5. Assist on technical communications with customer/partner, to ensure closure of sales order;
6. Ensuring that the solution can deliver on the customer’s requirements;
7. Work closely with Level 2 support, if case issue is escalated to Level 3;
8. Maintain rapport with customers and competence in managing vendors; and
9. Any other ad-hoc duties assigned.

Job Requirement:

• Degree/Diploma in IT Networking or equivalent
• At least 2 years of work experience in a SI or distributor environment with network security skillset
• Good IT knowledge in OSI 7 Layer, TCP/IP, LAN/WAN technologies and network security
• Ability to work under pressure with minimal supervision
• Excellent in communication and analytical skill
• Experience in network security projects implementation
• Positive working attitude and a good team player
• Willing to work extended office hours and after office hours when needed
• Exposure to security solution such as Firewall, local balancer or endpoint protection will be an added advantage

Responsibilities:

· Software development and implementation for high speed automated equipment

· Software design, coding, testing, debugging and validating

· Evaluating and establishing system performance and specifications

· Provide software technical support to a team of field service engineers

· Software maintenance of existing equipment

Requirements:

· Degree in any Engineering discipline with minimum 3 years of experience in software development in the automation / semiconductor industry

· Strong programming skills in C / C++

· Must have good hands-on experience in programming multi-threaded windows application using Visual C++

· Good knowledge of electronic components, motion control and interfacing with inspection systems

· Strong Mathematical and Algorithmic development skills

· Must be self-motivated and able to work independently

· Proficient in English (both written and spoken)

· Able to travel overseas for field support when required

· Must be prepared to work overtime when necessary