As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Key Responsibilities:

• Team Leadership: Manage and mentor a development team of 5 – 10 members.
• Project Management: Provide accurate estimates and oversee project deliverables .
• Frontend Development: Lead front-end development using Node.js, JQuery, Bootstrap, and related tools
• Technical Expertise: Utilize Java, Python, Groovy & Grails, Spring MVC, Hibernate, and other frameworks for full-stack development.
• Banking Experience: Develop secure and compliant banking-related applications.
• Quality Assurance: Conduct code reviews and maintain coding standards.
• Consulting: Propose technical solutions to client challenges and improve system efficiency.
• Product Demonstrations: Present project outcomes to clients and stakeholders.

Qualifications and Skills:

• Experience: 10+ years in software development projects, with a strong focus on banking solutions.
• Leadership: Proven ability to lead development teams of 5 - 10 members.
• Banking Expertise: Hands-on experience with banking systems, processes, and compliance.
• Technical Skills: Proficient in Java,Python, Groovy & Grails, Spring MVC, Hibernate, and frameworks like Node.js
• Frontend Development: Expertise in JQuery,Bootstrap, BackboneJS, and related tools.
• Database: Experience with Oracle,PostgreSQL
• Communication: Strong ability to manage client expectations and liaise effectively.

Key Responsibilities:

• Partner with multidisciplinary teams to craft, build, and launch top-tier software applications, spanning mobile and web interfaces, as well as corresponding backend systems.
• Advocate for and implement industry-leading software development methodologies, including collaborative coding, peer review, and test-driven development.
• Spearhead technical forums, design system architectures, and coach team members to cultivate expertise and excellence.

Requirements:

• A minimum of 5 years of experience as a full-stack developer, with a demonstrated history of delivering high-performance, scalable solutions.
• In-depth knowledge of modern web development frameworks, including ReactJS, NextJS, TypeScript, and Kotlin/Java.
• Skilled in designing, implementing, and managing continuous integration and delivery pipelines, with expertise in deploying applications on cloud-based platforms such as AWS.
• Familiarity with database migration tools and techniques is a plus.
• Experience working in Agile/Scrum environments is also desirable.
• Excellent verbal and written communication skills, with the ability to clearly articulate complex technical concepts.
• A self-driven and proactive individual with a strong passion for innovation and continuous improvement.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

http://www.dadaconsultants.com/

—------------

EA License number : 20S0283

EA Personnel : R1332294

Summary:

• Basic up to $6000 (Senior), $5000 (Junior)
• Performance bonus
• Location: AMK / YCK / Central
• 5 days work week
• Familiar with ACMV
• Career advancement & stability

Key Responsibilities:

• Manage and lead the electrical team
• Perform engineering duties: design, engineering calculations, planning, tender and etc
• Perform testing and commissioning of ACMV electrical system
• QA/QC
• Resolve any technical issue during any stage of the project
• Liaise with clients, project manager, contractor and etc
• Ensure the team follows all electrical codes and standards
• Other relevant ad-hoc duties

Key Requirements:

• Min 5 years of relevant experience in Construction Electrical field, including testing and commission
• Familiar with ACMV

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Description

•Assist the PM in taking over project awarded via kick-off meetings,

•Organize resources and work out the allocation of tasks to work teams and sub-contractors,

•Assist the PM with on and off site meetings pertaining to technical issues,

•Ensuring that project management tools are updated daily and documentation properly done,

•Inspect all installations and carry out inspections with Clients and Consultant's representatives,

•Conduct Testing and Commissioning (T&C) and preparing T&C reports,

•Design corrective actions to mitigate scope ad schedule creeps, and

•Assist the PM in demobilizing and handling over of projects to customer.

•Other duties as assigned.

Requirements

•Preferably with Specialist Diploma in M&E Coordination / Diploma in Building Services Engineering / Mechanical / Electrical;

• Candidates without the necessary academic qualification will also be considered based on project references;

•Preferably with 1-2 years' experience in the construction of M&E or ACMV projects.;

• Required skill(s): MS Office, MS Project, Autocad.;

•Entry level applicants are encouraged to apply.

Interested candidates are invited to apply online with a comprehensive resume, via the APPLY NOW button below or send the resume to [email protected]

. Conduct feasibility study to develop basic and detailed engineering designs.

. Manage budget and resources to ensure timely project completion.

. Manage project to ensure compliance with legal and safety requirements.

. Motivate team members and develop their skills.

. Oversee workplace safety to ensure work is performed according to workplace safety procedures.

. Minimum 1 years experience in Building Construction works.

• Assist the Project Manager in overseeing the construction activities and progress, planning, implementation, and monitoring of work schedules.
• Liaise with both internal and external parties and ensure efficient communication.
• Ensuring that the works are carried out to schedule and in accordance with relevant regulations
• Other ad-hoc duties as assigned

About Us!

The Housing and Development Board (HDB) has been at the forefront of the Public Service Transformation effort, iteratively building towards the successful delivery of HDB’s services to our customers digitally. The Information Services Group in HDB champions this effort, developing customised IT solutions that affords HDB the flexibility and efficiency in serving its missions.

What Will You Do?

You will be in a pioneer team in HDB’s Information Services Group that seeks to embrace DevSecOps culture and practices for application development. With the goal of creating cross-functional teams that would be responsible for the end-to-end delivery of IT services, we aim to adopt a you-code-it, you-run-it approach to software product development and maintenance. The success of our endeavour will form the blueprint upon which all subsequent in-house DevSecOps teams can be modelled after.

As a software engineer on this team, you will work with fellow developers, your Technical Lead, Product Owner and Delivery Manager in iteratively delivering IT solutions for both internal and external stakeholders of HDB. You will have the opportunity to be exposed to different aspects of software delivery, including solution design, CI/CD pipeline configurations, frontend and backend development, and test automation.

You will be a Great Fit if you Have:

1. Have 3+ years frontend and/or backend software engineering experience in building scalable products, with a demonstrated ability in designing and building well-structured enterprise applications on commercial cloud:
a. Skilled in modern web application technology stack, such as React.js, Spring, FastAPI, Django, PostgreSQL.
b. Experienced in development and deployment on commercial cloud such as Amazon Web Services (AWS), Google Cloud Platform (GCP) and Microsoft Azure
c. Experienced in Loosely Coupled Architecture and Application Integration Patterns, such as Microservices and Scatter-Gather, with the ability to design and architect scalable and resilient systems
d. Experienced in containerisation technologies, such as Docker, AWS ECS and Kubernetes
e. Has exposure to infrastructure provision tools, such as Terraform and Ansible
f. Embraces the concept of DevSecOps and CI/CD, with experience in relevant CI technologies such as Git, Jenkins, and Bamboo.
g. Understand the concept of Secure-By-Design Lifecycle for Agile and the utilisation of technologies for SAST and DAST
h. Practised Test-Driven Development with the utilisation of automated testing
i. Exposure in performance optimisation and tuning of applications and databases
2. Is adaptable and thrives in dealing with uncertainties
3. Can articulate software problems and proposed solutions clearly
4. Thrives in working as a team, and embraces a team-first mentality

Good to Have:

- Adaptability and thrives in dealing with uncertainties

- Can articulate software problems and proposed solutions clearly

- Thrives in working as a team, and embraces a team-first mentality

- Takes initiative, pride and ownership in work

- Growth mindset

Successful candidates will be offered a 1+1 year contract in the first instance. Conversion to perm is dependent on good performance.

Find out more about a career with HDB at www.hdb.gov.sg/cs/infoweb/about-us/careers

Entry level applicants are welcomed to apply.

Please apply for the job through the Careers@Gov job portal as linked:

https://www.careers.hrp.gov.sg/sap/bc/ui5_ui5/sap/ZGERCFA004/index.html#/JobDescription/15360504/bd622d52-6b55-1eef-acdd-0adabd72e206

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

As a Test Engineer at MSB, you will be responsible for developing frameworks for monitoring and improving Engineering performance to plan, providing value-add engineering solutions, and driving continuous improvement projects in Test processes. You will also provide support in product test proliferation and excursion management activities.

Responsibilities and Tasks

Develop frameworks for monitoring and improve Engineering performance to plan

• Maintain knowledge of engineering plans, forecasts and targets
• Develop systems for tracking and monitoring actual performance
• Evaluate and resolve performance issues
• Drive projects to improve performance to plan

Provide value-add engineering solutions to meet cycle time improvement, cost reduction and quality performance goals

• Participate in Test cycle time, cost and quality improvement teams
• Review and evaluate variables that contribute to cycle time, cost and quality
• Develop and implement cycle time, cost and quality improvement projects

Drive continuous improvement projects in Test processes to improve operational efficiency and productivity

• Maintain Test process, equipment, systems and product knowledge
• Perform Test efficiency and productivity analysis
• Develop and implement improvement projects

Provide support in product test proliferation activities

• Activate manufacturing test readiness team
• Verify production readiness
• Perform production validation
• Ensure qualification effectiveness and efficiency

Support Quality team in excursion management activities

• Participate in Test containment and disposition activities
• Perform and verify Test disposition system set ups
• Execute and ensure timely disposition of deviation materials

Work closely with Test planning/manufacturing/engineering teams to ensure the smooth execution of Test manufacturing operations

• Participate in Test operations review discussions
• Provide tactical engineering support

Collaborate with multi-functional Central/Site teams to overcome Test operation issues and challenges

• Investigate and identify root cause of issues
• Implement corrective actions
• Design preventive measures

Job Requirements

• Bachelors /Masters in Electrical and Electronic Engineering, or related fields.
• Knowledge of semiconductor processing, device physics, and Silicon IP.
• Self-motivated, enthusiastic, and proactive.
• Proficiency in statistics, data analysis tools, problem-solving and analytical skills.
• Excellent communication and presentation skills both oral and written.
• Ability to work independently, prioritize tasks, and manage numerous projects with minimal supervision.
• Effective collaboration across departments and with external partners.
• Familiarity with Big Data Analytics, Process Automation and Generative AI Applications will be an added advantage.
• Leadership experience
• Keen and knowledge of the semiconductor Industry
• Experiences in the development, procurement, installation, and calibration of instruments, equipment, and control devices for both New Product Introduction (NPI) and High Volume Manufacturing (HVM). Experiences in managing the operational, functional, and performance testing of semiconductors and conducts Root Cause Analysis for low yield issues and analyzing and interpreting test data, and prepares technical reports and publications.

What you will do:
As Digital Solution Engineer/ Architect, you will be taking lead on application of digital software to our customer requirements and supporting digital sales specialists to sell the deals with include:

Client Engagement:

• Engage with prospective and existing clients to understand their business objectives, challenges, and technical requirements.
• Conduct discovery sessions to gather detailed information on customer needs, pain points, and success criteria.
• Develop and manage customer technical relationships, identify and expand digital opportunities.

Solution Design & Architecture:

• Develop customized digital solutions that align with client requirements, leveraging Johnson Controls’ digital OpenBlue portfolio, including IoT, AI, and data analytics platforms.
• Create and present high-level architectural solutions that address client needs, ensuring scalability, flexibility, and efficiency.

Technical Support to Sales:

o Qualify opportunities in terms of customer technical requirements and contribute to the Go/No-Go recommendations.

• Collaborate closely with the sales team to provide technical expertise throughout the sales cycle.
• Assist in the preparation of proposals, RFP responses, and presentations, ensuring they are technically accurate and compelling.
• Act as a technical advisor and thought leader to clients during meetings, workshops, and demonstrations.

Internal & External Digital Advocate:

o Enable the branch eco-system on technical aspect of the OpenBlue Solutions.

o Identify & train external partners to expand JCI digital solution business market reach

Product Demonstrations

• Deliver compelling product demonstrations that highlight the value and capabilities of Johnson Controls’ digital solutions.
• Tailor demonstrations to specific client needs, showcasing how our solutions can address their unique challenges

Solution Validation & Product Roadmap:

• Work with internal product teams to validate and optimize solutions for client-specific implementations.
• Provide feedback to product development teams on client requirements and market trends to inform future product enhancements.

Post Sales Activities:

• Support delivery readiness and gathering required documents including Scoping documents, IT approval, technical support during implementation
• Support Customer Kick-off meetings.

Documentation & Training:

• Develop and maintain technical documentation, including solution architectures, integration plans, and client-specific configurations.
• Provide training to sales teams and partners on new digital solutions and architectural best practices.

Industry Knowledge & Trends:

• Stay informed about the latest trends in digital solutions, smart building technologies, and industry-specific regulations.
• Share insights and best practices with clients and internal teams to drive innovation and competitive advantage.

How you will do it:

Technical Skills:

• Strong understanding of digital solutions, including IoT platforms, AI, data analytics, cloud computing, OT Cyber security and smart building technologies.
• Good understanding of building protocols like BACnet, Modbus, OPC, MQTT and other BAS protocols
• Proficiency in architectural frameworks, integration methodologies, and solution design best practices.
• Experience with relevant software and SaaS application in built or industrial environment.

Soft Skills:

• Commercial acumen
• Excellent communication and presentation skills, with the ability to convey complex technical concepts to non-technical audiences.
• Strong problem-solving abilities and a customer-centric mindset.
• Ability to work collaboratively in a cross-functional team environment

What we look for:

• Bachelor’s degree in computer science, Engineering, Information Technology, electronics, instrumentation, communication or a related field. A master’s degree is a plus
• Relevant certifications in cloud architecture, IoT, networking, cyber security or other digital technologies are a plus
• At least 6-7 years of experience in built or industrial environment.
• Minimum of 5 years of experience in a solution architect or presales role, preferably within the digital solutions, IoT, or smart building technology sectors.
• Minimum 3 years of experience in designing or delivering energy efficiency, workplace optimization, Asset Management, Facility management, HVAC optimization or digitization SaaS application in built or industrial environment.
• Proven track record of successfully designing and presenting technical solutions that meet client needs and drive business outcomes.
• Proficiency in APAC local language, Chinese is a plus as this position will require to liase with Chinese speaking customers.

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

The Government Technology Agency (GovTech) is the lead agency driving Singapore’s Smart Nation initiatives and public sector digital transformation. As the Centre of Excellence for Infocomm Technology and Smart Systems (ICT & SS), GovTech develops the Singapore Government’s capabilities in Data Science & Artificial Intelligence, Application Development, Smart City Technology, Digital Infrastructure, and Cybersecurity.

At GovTech, we offer you a purposeful career to make lives better. We empower our people to master their craft through continuous and robust learning and development opportunities all year round. Our GovTechies embody our Agile, Bold and Collaborative values to deliver impactful solutions.

GovTech aims to transform the delivery of Government digital services by taking an "outside-in" view, putting citizens and businesses at the heart of everything we do.

Play a part in Singapore’s vision to build a Smart Nation and embark on your meaningful journey to build tech for public good. Join us to advance our mission and shape your future with us today!

Learn more about GovTech at tech.gov.sg.

We are seeking a Data Engineer to join our team.

You will be part of a data team deployed at a government agency identified as a strategic partner for GovTech, building out data products critical to WOG’s ops and service delivery as identified under the Digital Government Blueprint (DGB2.0) programme. You would operate in close alignment to Data and AI Practice's approach and philosophy, and would be closely supported by central GovTech products and platforms teams. This role requires an individual with experience in cloud-based data engineering work, as well as good communication skills, as you will be expected to interact frequently with the partner agency's users to elicit useful business information that enables you to perform your job.

What you will be working on:

• Translate data requirements from business users into technical specifications.
• Collaborate with partner agency’s IT teams on technology stack, infrastructure and security alignment.
• Build out data product as part of a data team:
• Architect and build ingestion pipelines to collect, clean, merge, and harmonize data from different source systems.
• Day-to-day monitoring of databases and ETL systems, e.g., database capacity planning and maintenance, monitoring, and performance tuning; diagnose issues and deploy measures to prevent recurrence; ensure maximum database uptime;
• Construct, test, and update useful and reusable data models based on data needs of end users.
• Design and build secure mechanisms for end users and systems to access data in data warehouse.
• Research, propose and develop new technologies and processes to improve agency data infrastructure.
• Collaborate with data stewards to establish and enforce data governance policies, best practices and procedures.
• Maintain data catalogue to document data assets, metadata and lineage.
• Implement data quality checks and validation processes to ensure data accuracy and consistency.
• Implement and enforce data security best practices, including access control, encryption, and data masking, to safeguard sensitive data.

What we are looking for:

• A Bachelor’s Degree, preferably in Computer Science, Software Engineering, Information Technology, or related disciplines.
• Deep understanding of system design, data structure and algorithms, data modelling, data access, and data storage.
• Demonstrated ability in using cloud technologies such as AWS, Azure, and Google Cloud.
• Experience in architecting data and IT systems.
• Experience with orchestration frameworks such as Airflow, Azure Data Factory.
• Experience with distributed data technologies such as Spark, Hadoop.
• Proficiency in programming languages such as Python, Java, or Scala.
• Proficiency in writing SQL for databases\
• Familiarity with building and using CI/CD pipelines.
• Familiarity with DevOps tools such as Docker, Git, Terraform.

Preferred requirements:

• Experience in designing, building, and maintaining batch and real-time data pipelines.
• Experience with Databricks.
• Experience with implementing technical processes to enforce data security, data quality, and data governance.
• Familiarity with government systems and government's policies relating to data governance, data management, data infrastructure, and data security.

Our employee benefits are based on a total rewards approach, offering a holistic and market-competitive suite of perks. These include leave benefits to meet your work-life needs and employee wellness programmes.

We champion flexible work arrangements (subject to your job role) and trust that you will manage your own time to deliver your best, wherever you are, and whatever works best for you.

Learn more about life inside GovTech at go.gov.sg/GovTechCareers.

Stay connected with us on social media at go.gov.sg/ConnectWithGovTech.

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing, Deskside support and Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 2 End User Computing support and well verse in Windows OS.
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment.
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support.
• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Response Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences.
• A good team player.
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

We are seeking a detail-oriented Software Testing Engineer to join our Quality Assurance (QA) team. The ideal candidate will be responsible for testing software applications to ensure they meet specified requirements and maintain the highest level of quality. You will execute test plans, report bugs, and collaborate closely with the development and product teams to ensure smooth product releases.

Responsibilities:

• Review and analyze system specifications and requirements.
• Develop and document detailed test plans, test cases, and test scripts.
• Perform manual testing on web, mobile, and desktop applications to identify defects and areas of improvement.
• Execute different types of testing including functional, integration, system, regression, smoke, sanity, and exploratory testing.
• Validate user interfaces (UI), workflows, and overall usability.
• Identify, document, and track defects using bug-tracking tools (e.g., JIRA, Bugzilla, Zephyr, etc.)
• Work closely with developers to reproduce bugs, provide steps to reproduce, and verify fixes.
• Collaborate with developers, product owners, and designers to ensure proper test coverage and seamless product delivery.
• Provide feedback on product design and feature improvements from a user perspective.
• Participate in team meetings and contribute to discussions on product quality and improvement.
• Prepare test data for different test scenarios and ensure consistency throughout testing phases.
• Verify and validate data integrity in database testing.

Qualifications:

• Bachelor’s degree in computer science, Information Technology, Engineering, or a related field (or equivalent practical experience).
• 3+ years of experience in manual testing.
• Familiarity with different testing methodologies (Agile, Waterfall, etc.).
• Hands-on experience with testing web, mobile, and/or desktop applications.
• Knowledge of SQL queries for backend/database testing.
• Strong understanding of software development lifecycle (SDLC) and testing lifecycle (STLC).
• Proficiency in writing clear, concise, and comprehensive test cases.
• Experience with bug tracking systems (e.g., JIRA, Redmine, etc.).
• Knowledge of automated testing tools and frameworks (though this is a manual tester role, familiarity with automation is a plus).
• Experience with API testing using tools like Postman.
• Understanding of performance and load testing concepts.
• Experience in working with CI/CD pipelines.

Job Summary:

You will be responsible for creating sales opportunities through specification of ADLINK product solutions, so as to achieve profitability and growth in market share. Additionally, you will assist to advice and support the sales team in terms of product’s applications.

Job Responsibilities:

• Understand customer’s technical needs and project specifications, ensure client’s needs and expectations are attainable and realistic, in relation to the product solutions that we offer.
• Attend customer’s meetings, and to present technical solutions to potential customers.
• Expected to facilitate workshops and trainings for customers and internal staffs, whenever necessary.
• ·Also expected to provide pre- and post- sales technical support and product demonstration as and when necessary.
• Advice and support the sales team on the selection of suitable products, technical assistance, and product strategies to win more businesses.
• ·Work effectively as a part of a team to achieve individual, team and departmental objectives, sharing knowledge and skill as appropriate.
• Maintain a sound technical/ application knowledge base on all ADLINK product solutions.

Job Requirements:

• Diploma/Degree in Electronics / Electrical / Software Engineering.
• Minimum 3-5 years of working experiences.
• Possess good knowledge of Embedded Computing, Automation, Test & Measurement applications and solutions.
• Proficient knowledge of VB, VC++, C# Programming languages.
• Able to debug PC-based Automation Control, Test & Measurement peripheral card issues.
• Meticulous, Well organize and good working attitude
• Disciplined, independent and able to perform under pressure.
• Willing to travel within short notice e.g., Training, Trade shows, etc.

The Digital Health Accelerator (DHA) is led by A*STAR, Ministry of Health (MOH) Singapore, SingHealth, National Healthcare Group (NHG), and National University Health System (NUHS). DHA supports innovators in driving adoption and scaling of market ready or near-market ready digital health solutions. DHA is hosted by Singapore's Diagnostics Development Hub (DxD Hub).

The DHA integration engineer is responsible for planning and developing workflow and technical interfaces between healthcare IT systems. She/He will work with DHA Project Managers, Solution Architects, health systems and companies to accomplish this objective. She/He may also be called upon to advise other developers on integration standards.

Responsibilities:

• You’ll be involved in the development, design, build, testing, and go live phases of multiple integration projects.
• This includes scripting to conform / transform to another systems specifications.
• You will also work with internal teams to continuously improve processes and procedures around deployment of interoperability products that communicate in HIT standards-based formats such as HL7, IHE Profiles, Direct, or SMART on FHIR.
• The Integration Engineer oversees the development of new interfaces and maintain the sandbox environment up to date for application testing.

Requirements:

• Bachelor’s degree in information systems, Computer Science, Engineering, Computer Information Systems, Management Information Systems, or equivalent experience
• 3+ years’ experience in HCIT integration using established and contemporary interoperability standards (e.g. HL7, SMRT, FHIR)
• Experience with SQL and relational databases, and communication using secure protocols.
• Ability to work in a team environment alongside developers and deployment teams.
• Utilise engines like Mirth Connect or Rhapsody to have a standard way of integration using both HL7 and DICOM
• Knowledge in developing and configuring Context Launch requirements according to AES 256 standards.
• Assess and customise integrations (HL7 / FHIR / DICOM) based on the project to specific workflow.
• Experience with cloud deployments and/or pipelines, especially Pivotal Cloud Foundry
• Experience with popular healthcare integration engines with ability to recommend and/or select different integration approaches depending on the desired outcomes for the system.
• Strong communication skills and ability to work with project stakeholders from different backgrounds (e.g. technical, clinical)
• Experience integrating with Singapore public hospital technical stack and working with Synapxe are a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Digital Health Accelerator (DHA) is led by A*STAR, Ministry of Health (MOH) Singapore, SingHealth, National Healthcare Group (NHG), and National University Health System (NUHS). DHA supports innovators in driving adoption and scaling of market ready or near-market ready digital health solutions. DHA is hosted by Singapore's Diagnostics Development Hub (DxD Hub). The DHA integration engineer is responsible for planning and developing workflow and technical interfaces between healthcare IT systems. She/He will work with DHA Project Managers, Solution Architects, health systems and companies to accomplish this objective. She/He may also be called upon to advise other developers on integration standards.

Responsibilities:

• You’ll be involved in the development, design, build, testing, and go live phases of multiple integration projects.
• This includes scripting to conform / transform to another systems specifications.
• You will also work with internal teams to continuously improve processes and procedures around deployment of interoperability products that communicate in HIT standards-based formats such as HL7, IHE Profiles, Direct, or SMART on FHIR.
• The Integration Engineer oversees the development of new interfaces and maintain the sandbox environment up to date for application testing.

Requirements:

• Bachelor’s degree in information systems, Computer Science, Engineering, Computer Information Systems, Management Information Systems, or equivalent experience
• 5+ years’ experience in HCIT integration using established and contemporary interoperability standards (e.g. HL7, SMRT, FHIR)
• Experience with SQL and relational databases, and communication using secure protocols.
• Ability to work in a team environment alongside developers and deployment teams.
• Utilise engines like Mirth Connect or Rhapsody to have a standard way of integration using both HL7 and DICOM
• Knowledge in developing and configuring Context Launch requirements according to AES 256 standards.
• Assess and customise integrations (HL7 / FHIR / DICOM) based on the project to specific workflow.
• Experience with cloud deployments and/or pipelines, especially Pivotal Cloud Foundry
• Experience with popular healthcare integration engines with ability to recommend and/or select different integration approaches depending on the desired outcomes for the system.
• Strong communication skills and ability to work with project stakeholders from different backgrounds (e.g. technical, clinical)
• Experience integrating with Singapore public hospital technical stack and working with Synapxe are a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

• Responsible for monitoring Shopee & Seamoney’s backbone network, data center network, and related networks. Ensure the rapid detection, notification, location, and resolution of network faults to maintain application stability and availability.
• Propose and implement standard designs and optimizations for network architecture.
• Enhance visibility of network infrastructure by participating in and refining standard processes. Collect and establish databases for network devices, links, and configurations. Set up accurate and automated network alerts and notifications using software tools.

Requirements

• Bachelor’s degree or higher in Computer Science, Information Technology, Programming & Systems Analysis, Engineering, or other related fields.
• At least 3 years of relevant experience with OSPF, BGP, ISIS, MPLS VPN / TE, QoS, IPsec, and other typical network protocols.
• Expertise in network DevOps systems, including network configuration management, IP Address Management (IPAM), and monitoring tools like PingMesh.
• Familiar with Cisco, Arista, Huawei, or other mainstream network vendors' product technology and product architecture.
• Experience in ensuring network reliability for large-scale data centers.
• Good communication skills and an effective team player, able to adapt to a diversified working environment.
• Well-versed in English (spoken and written).
• Hands-on experience with at least one of the script languages: Python, and Shell.

The skills below are optional but preferable:

• Experience in traffic analysis and network risk management.
• Familiar and hands-on experience in Palo Alto, Fortinet, or ASA firewall.
• Having a Cisco, Huawei's advanced certificate is a bonus
• Large ISP Network Tech Ops experience is preferred

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.