Job Description:

• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned from inception to completion within the specified timeframe and of the desired quality.
• Liaise with authorities, consultants and subcontractors.
• Implement architectural and structural works.
• Good communication skills to enhance good team working spirit.

Requirements:

• Experience in management of projects will be advantageous.
• Recognized degree in Civil/Structural Engineering by P.E. Board / BCA.
• Initiative, self-motivated, possess a strong drive with high responsibility and result oriented.
• Preferably 1 - 5 years working experience in Civil & Structural works.
• Experience in engineering software and AutoCad would be an advantage.
• Fresh graduates may apply.

We require an experienced Engineer for our ACMV division.

Job Scope

1)Project Planning and Project execution including documentation and budgeting for Service,Repair and Installation Costing

2) Installation/ Service and Repair on the following brand and systems

1. GUNTNER
2. SABROE
3. MUNTERS
4. EVAPCO

3) Material procurement for project

4) Liaise with clients on projects

5) Complete vendor evaluation

6) Supervise at site for installation and safety compliance

6) Testing and commission for ACMV systems

Job Requirements

1) Degree in Engineering or Equivalent

2) At least 8 years of work experience in projects wit focus on ACMV

3) Speaks English well to communicate to clients

4) Proficient in Microsoft Word, Excel

5) Experience in Projects for ACMV

Candidates are expected to:-

• Take lead of the shipboard engineering department and engineers in the maintenance, operations, and repairs of the vessel’s mechanical and electrical systems, equipment, and installations;
• Ensure seaworthiness and readiness of the vessel’s mechanical and electrical systems, equipment and installations in accordance to voyage schedule;
• Plan and maintain inventory of spare parts, fuel, and lubricating oil;
• Take charge of emergency drills and situations related to the vessel’s mechanical and electrical systems, equipment, and installations;
• Develop and control plans for the maintenance of technical installations and equipment throughout the vessel;
• Deploy vessel staff in close consultation with the Chief Mate and Second Engineer;
• Appraise the performance and potential of the vessel's staff in accordance with established company procedures
• Ensure the vessel has sufficient freshwater supply for the voyage;
• Oversee bunkering procedure and liaise with relevant stakeholders for the delivery of bunker vessel;
• Ensure compliance to all local, national and international environmental laws relating to maritime safety, pollution, and domains where applicable; and
• Perform survey work in accordance with Classification Society regulations.

The ideal candidate must:-

• Possess a valid Certificate of Competency (Marine Engineer Officer) Class 1; and
• Possess at least 3 years of experience as a Chief Engineer onboard a container vessel.

Job Highlights

• Good Salary Package, Performance Bonus, Allowance
• 5 Day Work Week
• SAFE Working Environment

Job Description

Responsibilities

• Break new grounds and penetrate the key industries as in; Food Packaging, Medical, Petrochemical, Chemical, Pharmaceutical, Semiconductor etc.
• Undertake the role to develop new and key accounts and strive towards achieving sales goals and objectives.
• Propose improved materials or products to customers and explain the benefits of the changes.
• Engage the customers on a day-to-day basis to initiate and coordinate sales activities.
• Preparation of sales proposal, quotations and attending customer’s enquiries
• Responsible for Sales target for Singapore region.
• Track and report sales activities; submit reports promptly.
• Be competent to undertake hands-on related issues arising from aftersales including onsite trouble-shooting.
• Create sales leads, follow up on sales opportunities and take ownership to follow up on quotations.
• Contract review prior to order entry – Evaluate and interpret customers’ specification against our offer. Clarify with customer where necessary to resolve unclear requirements. Be responsible to coordinate with Order Administration team on shipment update and information going back to the customer up to the point of delivery.
• Working closely with customers to find application possibilities and propose suitable technical solutions.
• Conduct competitive analysis and identify market price for various suppliers and market segments in Singapore.
• Conduct product and application training if necessary.
• All other ad-hoc duties as assigned by the company.

Requirements:.

• Degree/Diploma in business, marketing, engineering or any relevant field.
• 1 to 2 years of sales engineering experience.
• Excellent communication, sales, and customer service skills.
• Salary depends on experience.
• Prefer with vehicle ownership.
• Self-motivated and ability to work in a team or independently with minimum supervision.
• Meticulous, organized and great interpersonal skills.
• Cheerful and pleasant personality.
• Excellent written and verbal communication skills.
• Able to converse and write in English and Mandarin.
• Mandarin language will be an advantage to communicate with Mandarin-speaking clients and suppliers occasionally.
• Computer literate, knowledge of Microsoft Office software. Outlook, Word, Excel and PowerPoint is a must.
• 2 years contract subject to convert full time staff.

Job Type

2 Years Contract

view more jobs: www.blueboxjobs.com

The detail plans as described above are as follows:

• Execution formation with the direction by COMPANY’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with COMPANY’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the COMPANY’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Candidates are expected to:-

• Participate in the general planning of maintenance and operations onboard vessel;
• Control the detailed implementation of the general plans in appropriate areas;
• Plan the activities of immediate subordinates and officers under his/her charge;
• Serve as a member of the Management Team onboard vessel;
• Implement safety policies and practices onboard vessels according to the QHSSE policies as defined;
• Perform the role of the Training Officer for any Engineer Cadets/Ratings;
• Deputise for the Chief Engineer when necessary; and
• Appraise the performance of immediate subordinates and Cadets and report to Chief Engineer.

The ideal candidate must:-

• Possess a Certificate of Competency (Marine Engineer Officer Class II); and
• Possess at least 3 years of experience as a Second Engineer Officer onboard a container vessel.

The ideal candidates will possess extensive knowledge of power plant systems and operations, along with strong communication skills to work with the project team. This role is crucial for ensuring that all plant engineering tasks are executed correctly.

Key Responsibilities:

• Supports the engineering team at site to ensure that all technical engineering deliverables are completed on time and on budget.
• Bridging all technical communication between site stakeholders and engineering team.
• To provide technical advice and resolve / troubleshoot technical issues at site.
• Site engineers collaborate with project managers, site supervisors, engineering team, and other stakeholders for coordination.

Desired Characteristics:

• Strong technology knowledge on electrical equipment and requirements to assist the site team - equipment listed below.
• Familiarity with Singapore standards for power plant (at least 30MW size) installation and commissioning, specifically for voltage ranges from 0.4kV to 66kV.
• Capability to address inquiries related to installation and commissioning matters, including technical clarification and documentation work.
• Strong communication skills. Ability to be the main liaison between multiple stakeholders.
• Prior experience in installation and commissioning in power plant projects
• Preferable experience with Singapore government projects

Working schedule: 8-6pm Mon to Sat, Sunday if needed.

Location: Tuas

Contract duration: 1 year

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

WHAT YOU WILL DO:

Cost Transformation and Energy Management

● Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.

● Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.

● Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program

● Support the computerized energy monitoring system for the site to drive efficiency and sustainability

● Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.

● Provide expertise in conducting energy audit, evaluating options and providing solutions

● Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation

● Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts

● Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

● Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate

● Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets

● Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

● Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology

● Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations

● Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site

● Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.

● Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

● Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan

● Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels

● Ensure projects are timely, on budget and completed in compliance to safety and quality

● Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

Technical Competencies

● Advance in Energy Conservation Technologies, Proven Energy Savings Program, Standards and Benchmarking.

● Advance in the practical application of theoretical engineering knowledge

● Advance in the development and monitoring of engineering budgets

● Advance in planning of engineering and non-engineering activities in support of role

● Advance in the principles and application of risk based decision

● Consistently applies and promote LSS, MPS and change management tools

SHE

● Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards

● Seek opportunities to improve company SHE standards and move company towards goal on injury free work place & better environment

cGMP Standards

● Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards

● Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions

● Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance

● Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Problem Solving

● Demonstrate creativity, maturity and foresight in providing solutions which are highly innovative, practical for implementation and may have strategic impact

● Lead cross-functional teams in the evaluation and resolution of complex problems with potential impact across business units and demonstrates ability to make rapid rational decisions under pressure

ACCOUNTABILITIES

● Undertakes activities to realize cost reduction, energy reduction or continuous improvement projects to be on time, on budget and to meet compliance requirements

● Effectively implements the Performance Management Process (PMP), ensures that objectives are developed, provides timely continuous feedback to direct reports, and appropriately rewards team members based on performance and demonstration of our leadership standards

● Implement effectively any tasks or projects as assigned by Supervisor as prioritized by business need.

WHAT YOU MUST HAVE

● Engineering Degree or equivalent

● Singapore Certified Energy Manager (preferable)

● Advance degree, such as Masters, would be a plus

● Work experience required with 5-20 years’ experience in engineering, manufacturing, consultancy or equivalent industry

● Demonstrate leadership behavior in alignment with our leadership standards

Functional Competencies

● Demonstrated project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.

● Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance and calibration.

● Demonstrated capability in vendor service contracts management.

● Demonstrated knowledge of our System Life Cycle Methodology.

● Understands maintenance programs and requirements (reliability-centered, preventative, predictive).

● Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

● Demonstrated capability in the application of appropriate trouble-shooting and problem solving techniques.

● Effective communication skills, ability to lead cross-functional teams.

● Performance planning: objectives setting, metrics, action plan, reviews and performance management.

● Understands the site value stream and is customer focused.

Provide technical expertise, improvement recommendations and guidance in support of the manufacturing process. Work to improve the performance and efficiency of existing machine. Plan projects or subtasks that may be tracked and presented.

Responsibilities :

• Gather, analyse and summaries production process data for their use in valuing and prioritising process continuous improvement opportunities; utilise continuous improvement methodologies to lead, implement, and track improvements and to conduct check and adjust activities with the objective to reduce wastes while striving for efficiency and profitability.

• Work with cross-functional personnel to analyse and solve production flow issues stemming from sequence of work, balance of tasks, tooling/equipment constraints, and manpower allocation/training.

• Analyse and makes recommendations regarding production facility arrangements for improvements to production capacity, manufacturing flow, new model incorporation, and strategic work transitions.

• Identify, justify and implement new technology and manufacturing techniques to improve safety/ergonomics, reduce manufacturing cost (Labour, material, inventory, scrap) and improve product/process quality.

• To develop and implement an Energy program to prevent waste/reduce utility consumption.

• Support the needs of the plant by participating in all strategic initiatives.

• Control of Bill of Materials (BoM), CAD Models and Engineering Drawings.

• Participate in overseas project management team by the provision of engineering and technical expertise in the design and installation of new plant design and production lines. This includes the designing, installing/constructing and commission new production plant, monitoring development.

• Develop, implement and manages all maintenance procedures to ensure all engineering and maintenance goals are met.

• Ensure the Maintenance Department supports the needs of production and keeps all production equipment in proper working condition.

• Write reports and present progress at project meetings.

• Ensure plant equipment and processes are in compliance with all regulatory requirements including WSH, environmental, health and emissions.

• Responsible for completing technical work assignments with direction and Supervision.

• Responsible for reporting and taking any necessary action to prevent food safety and food quality problems from occurring.

• Responsible for following and enforcing procedures outlined in the HACCP & Quality Plan under the ISO & ISO Management Systems.

• Perform other related duties as assigned by superior.

Requirements :

· Diploma in any Engineering / Project Management related discipline.

- Fresh Graduates are welcome.

· Proactive team player and technically motivated to solve problems, innovate and deliver to internal and external customers.

· Possess strong written and communication skills.

Job Highlights:

• company transport provided
• Meal provided

Section A: Objectives/Purpose of the Job

The successful candidate will support the execution of planned changes at our Singapore sites, focusing on hardware replacements, troubleshooting, and installations. This role is vital for ensuring smooth operations and minimizing downtime during change implementations.

Section B: Key Responsibilities & Key Result Areas

• Network Equipment Familiarity: Understand and work with network devices and their components, including fibre and copper cables.
• Support Planned Activities: Participate in early morning green zone activities (between 11pm and 6am) two to three times weekly within Singapore, as required.
• On-site Hardware Support: Execute hardware changes, including the physical replacement and installation of network devices, plugin of USB media, organize the fibre/copper cables in preparation for planned activities and other equipment as per change requests.
• Troubleshooting: Diagnose and resolve issues encountered during change implementation with existing hardware and consoles, ensuring minimal disruption to operations.
• Console Setup: Provide console connection as needed during planned activities.
• Communications: Liaise and coordinate with implementation engineers, internal stake holders , providers and partners to ensure swift and efficient resolution of faults
• Continuous Improvement: Identify areas of improvements to reduce Infrastructure faults and improve monitoring capability.

Working Hours:

• Regular Hours: 8:30am-6pm SGT in Singapore Office, if no on-site activity
• Early morning green zone activities: twice or thrice weekly, between 11pm to 6am

Additional Information:

• Travel: travel within Singapore required
• Physical Demands: Ability to lift and move equipment as necessary, and perform tasks in various physical environments.

Section C: Qualifications & Experience

Must have

Good to have

Qualifications

A good Diploma in Electrical / Electronic / Computer Engineering / Computer Science / Information Systems from a recognized institution

Candidates with 2 years of relevant experience and knowledge in network devices and transport can be considered if there is no diploma.

Experience

1 – 2 years of hands-on experience on network devices

Technical / Professional Skills

• Knowledge of routers/switches architecture and analytical trouble-shooting skills in the area of technical fault isolation and rectification.
• Working experience and strong understanding of Juniper devices and its parts will be an added advantage

Non-Technical / Soft Skills

• Possess good interpersonal and communication skills.
• Possess basic knowledge of office applications skills e.g. Excel, Visio, Word.
• Self-starter and highly driven with the ability to work independently, as well as in a team.

Key Responsibilities:

• Refine data collection/consumption by migrating data collection to more efficient channels.
• Plan, design and implement data engineering jobs and reporting solutions to meet the analytical needs.
• Develop test plan and scripts for system testing, support user acceptance testing.
• Work with the Authority’s technical teams to ensure smooth deployment and adoption of new solution.
• Ensure the smooth operations and service level of IT solutions.
• Support production issues - Track record in implementing systems with high availability, high performance, high security.

The Talent:

• Good understanding and completion of projects using waterfall/Agile methodology.
• Good understanding of analytics and data warehouse implementations.
• Strong experience in Cloudera implementations and administration
• Strong knowledge on CDP, CDH and HDP
• Ability to troubleshoot complex issues ranging from system resource to application stack traces.
• Strong SQL, data modelling and data analysis skills are a must.
• Hands-on experience in big data engineering jobs using Python, PySpark, Linux, and ETL tools like Informatica.
• Track record in implementing systems using Hive, Impala and Cloudera Data Platform will be preferred.
• Hands-on experience in DevOps deployment and data virtualization tools like Denodo will be preferred.
• Understanding/ Hands on experience of reporting or visualization tool like SAP BO and Tableau will be beneficial but not required.
• Passion for automation, standardization, and best practices
• Good written and verbal communication and interpersonal skills, ability to understand the business requirement, communicate confidently with stakeholders.

We regret that only shortlisted candidates will be notified.

Please kindly send in your updated CV (please include your current salary package with full breakdown and expected salary) to [email protected]. Your interest will be treated in strict confidence.

People Profilers Pte Ltd

DID: 6950 9738

http://www.peopleprofilers.com

Lim Yi Tian, Candy

EA License No. 02C4944
Registration No. R1109829

Key Responsibilities:

· Manage and direct the day-to-day operations of IT services

· Manage outsourced vendors and in-housed contractors to meet the delivery and operation needs of IT services

· Manage change request, service request and production support issues and ensure service levels are met

· Review system designs and technical specifications to ensure all requirements are captured to meet system objectives

· Review post production issues and identify root cause and work with vendors on preventive measures

· Plan, execute and support system implementation, software/hardware upgrades and security patches

· Manage the verification of software patches and upgrades for applications

· Measure, monitor and continuously improve performances of IT service

The Talent:

· Bachelor or higher Degree in IT or equivalent

· At least 5-8 years of relevant experience in application production support on Java and .NET applications in both Unix and Windows operating environments

· Experience in incident management, problem management, release management, root cause analysis and deployment

· Understand SDLC and experience working with business users, various IT teams and vendors

· Knowledge of web languages (e.g. HTML/CSS, JavaScript)

· Experience with .NET Core

· Familiarity with databases (e.g. Oracle, Microsoft SQL) and application servers (e.g. IIS,WebSphere Application Server)

· Prior experience working as a Systems Analyst for a Government organization will be a big plus

· Sound understanding of the technical aspects of systems integration in an environment with diverse technology

· Strong communication skills and ability to influence to gain consensus from multiple stakeholders when required

· Possess strong information acquisition, analytical and problem solving skills

· Good organization skills and able to work with minimal supervision in a rapidly changing

environment

We regret that only shortlisted candidates will be notified.

Please kindly send in your updated CV (please include your current salary package with full breakdown and expected salary) to [email protected]. Your interest will be treated in strict confidence.

People Profilers Pte Ltd

DID: 6950 9738

http://www.peopleprofilers.com

Lim Yi Tian, Candy

EA License No. 02C4944
Registration No. R1109829

Job Responsibilities

• Basic troubleshooting, installation, calibration, maintenance and repair on designated equipment.
• Completing Preventative Maintenance/Calibration reports
• Keeping up to date on administrative responsibilities such as maintaining customer service logs and internal service records in a timely manner.
• Maintaining daily communications with customers to ensure resolution and proper follow-up.
• Utilising the escalation process to resolve customer service delivery issues.
• Identifying and participating in sales opportunities such as new contracts or contract renewals
• Working as a member of the local team to provide efficient service delivery to all accounts within the assigned area.

Qualifications & Requirements

• Candidate should be Electrical /Electronic/ Mechanical trained with qualifications from polytechnics or relevant institutions.
• Possess some basic IT related experience.
• Possess minimum 2 years of relevant working experience/ Candidates with limited working experience will also be considered.
• Experience in troubleshooting and responding to customer concerns.
• Should have basic level of computer skills including MS Word, PowerPoint, Excel and Outlook
• Candidates are required to perform outdoor servicing of equipment and work in warm/humid environment.

The Project Engineer for the project will be responsible for managing and overseeing the technical aspects of the offshore substation engineering, procurement, construction, transport & installation, and commissioning processes. This role involves ensuring that all engineering activities are conducted in accordance with project specifications, timelines, budgets, and quality standards. The Project Engineer will work closely with the engineering, construction, and commissioning teams to ensure the successful execution of the offshore substation project.

DUTIES & RESPONSIBILITIES

Engineering and Technical Support:

• Coordinate and oversee the detailed design activities for the offshore substation, ensuring compliance with Employer Requirement, industry standards (e.g., IEC, DNV, ISO), and safety regulations.
• Support performing engineering calculations, simulations, and assessments to verify the integrity of designs and ensure that all technical requirements (e.g., electrical, mechanical, structural) are met.
• Provide technical support to the project team during design, procurement, construction, and commissioning phases. Address any technical queries and assist with resolving complex engineering challenges.
• Participate in design reviews and workshops with the engineering team, ensuring that designs are optimized for cost, schedule, and performance.

Procurement, Supplier & Subcontractor Management:

• Work closely with the procurement team to define technical specifications for equipment, materials, and systems required for the offshore substation. Ensure that procurement activities align with engineering requirements.
• Liaise with suppliers and subcontractors to ensure the timely delivery of materials and equipment. Participate in supplier selection and manage technical discussions and clarifications.
• Oversee the performance of subcontractors and suppliers during the entire project schedule, ensuring compliance with technical requirements and specifications.

Construction and Transport & Installation Oversight:

• Coordinate with the construction team to ensure that the offshore substation is constructed according to design specifications. Supervise the installation of electrical, mechanical, and structural components of the substation.
• Monitor the quality of materials, workmanship, and installations. Ensure all activities adhere to the project’s quality management system (QMS) and relevant standards.
• Liaise with the offshore construction team to provide technical support, ensuring that engineering issues are promptly addressed and resolved. Act as the primary focal point for any technical challenges during construction and T&I stage.
• Track the progress of construction and transport & installation activities, ensuring they are completed on schedule. Provide regular updates to the Project Manager regarding the status of engineering tasks.

Safety, Health, and Environmental (SHE) Compliance:

• Ensure that all engineering and construction activities adhere to the project's health, safety, and environmental (HSE) policies and regulations. Support in conducting safety audits and risk assessments where applicable.
• Identify potential risks associated with engineering tasks, including offshore conditions, and work with the project team to develop strategies to mitigate these risks.

Commissioning & Handover:

• Provide technical support during the post-commissioning phase to address any issues that arise and ensure the substation operates efficiently.
• Collaborate with the commissioning team to ensure the offshore substation is tested and commissioned successfully. Provide technical support during system tests, including electrical, mechanical, and communication systems.
• Ensure all technical documentation, including design calculations, test reports, commissioning results, and as-built drawings, is accurately recorded and handed over to the Employer.

Reporting & Documentation:

• Prepare and deliver regular technical reports to the Project Manager and senior management, outlining the status of engineering tasks, challenges, and any risks, being incorporated in Project Report.
• Maintain accurate and up-to-date technical documentation, including design changes, specifications, test results, and approvals. Ensure all documents are in compliance with project management processes and procedures.

Coordination & Communication:

• Work closely with other disciplines (electrical, mechanical, structural, etc.) to ensure that the design, construction, and commissioning of the projects are well integrated.
• Maintain clear communication with Employer, subcontractors, suppliers, and other stakeholders. Liaise with project team in providing technical explanations and in resolving any issues that arise during the project lifecycle.

REQUIREMENTS

Education

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Civil Engineering, or a related field. A Master’s degree is a plus.

Experience

• Minimum 5-8 years of experience in project engineering, with at least 3 years in offshore energy projects (e.g., offshore substations, offshore wind, or oil & gas industry).
• Experience with electrical, mechanical, and civil engineering aspects of offshore substations is highly desirable.
• Experience in project coordination and the ability to manage technical tasks within a multidisciplinary team.

Qualifications

• Strong understanding of offshore substation systems, including electrical distribution, power transformers, switchgear, protection systems, and control systems.
• Familiarity with the design, procurement, construction, and commissioning phases of offshore substation projects.
• Knowledge of relevant codes and standards (e.g., IEC, DNV, ISO, and offshore standards).
• Strong verbal and written communication skills, with the ability to clearly present complex technical information to non-technical stakeholders.
• Ability to work effectively with Employer, subcontractors, and team members, both onshore and offshore.
• Strong analytical and problem-solving skills with the ability to resolve technical issues on the spot and think critically during challenging situations.
• Knowledge of offshore health, safety, and environmental regulations and the ability to implement safety measures during engineering and construction activities.
• Offshore safety certifications (e.g., BOSIET) are a plus.
• Familiarity with engineering design software (e.g., AutoCAD, VISIO, etc.) is desirable.

A global manufacturing firm is looking for a System Eningeer to join their team. Manage enterprise-level Windows servers for on-prem and Azure cloud and security vulnerabilities.

Your new role:

• Configure, deploy and manage on-premise Windows servers including Active Directory, DNS, group policies etc
• Monitor and optimize system performance and availability, troubleshooting and resolving issues across the Windows ecosystem.
• Implement, manage, and monitor cloud-based solutions in Azure, including M365, Azure AD, Virtual Machines, and ensure seamless integration between on-premises Windows systems and Azure resources.
• Apply knowledge of Windows security protocols to secure communications across applications and systems.
• Assess and mitigate risks associated with any security vulnerabilities, certificate management, and encryption practices.

You will need:

• Prior experience in a similar role managing Windows system and server infrastrcuture on a global scale, idealing working with IaaS and PaaS operations
• Sound technical knowledge on Windows infrastructure (e.g. Windows Server 2016/2019/2022) and Azure cloud services and best practices for hybrid environments
• Experience writing scripts for automation in powershell is preferred as is familiarity with Windows security frameworks (e.g., zero trust, CIS and more)
• Professional certifications such as Microsoft Certified: Azure Fundamentals or Solutions Architect Expert is a strong advantage

If you are interested in this role or know someone who might be suitable, please click 'Apply' to submit an updated copy of your CV or email [email protected].

EA registration No.: R1987315

Employment Agency License No.: 18C9146

• Knowledge on Internet Technologies (i.e. routing, switching and general network infrastructure),
• Experience in network operations/maintenance and passionate about providing troubleshooting support
• Strong analytical and problem-solving skills, and has a flair for dealing with technical and operational problems
• Experience in IT audit or CISA/CISM certified preferred or operational risk management and control self-assessment or prior experience in implementing security solution and information security governance
• Enterprise Data Network (administration, patching, upgrade and migration activities), Design, Preparing of HLD/LLD, Implementation Team leading, Service Level management, demand, incident, change management.
• Cisco/Aruba Switching /Routing & WLAN
• DDI, AAA/Cisco ISE
• As Built, LLD, Testing & Acceptance Testing Documentation Skills
• ZScaler & Network Security
• Provide network WAN/LAN design, implementation, consulting, Cisco, Aruba, Juniper
• Network audit Identify the gaps and suggest the remedial solution. Supporting in RFP/RFI response.
• Experience in running operations with ITIL processes / Project Management - PMP

• Running daily testing and diagnostics on IT systems to identify potential problems
• Strong understanding of High Availability setup for Linux/Windows applications (etc. webs, database)
• Strong network fundamentals – IPv4/IPv6 – addressing, NAT, Routing
• Network and Systems troubleshooting and maintenance
• Good to have disaster recovery planning and execution
• Building robust backups that can be accessed in the event of system failures
• Private cloud administration experience is a must – VMWare / Hypervisor
• In-depth experience in DNS, DHCP, Proxies, Linux firewalls & network security is a must.
• Maintain and Administer Security Appliances of different projects
• Liaising with senior operational staff to ensure that company systems can help fulfil wider business goals
• Design and propose a plan that will improve the hosting service of the Data Center

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a DevSecOps Engineer to join us!

Role and Responsibilities:

• Design, implement, and manage CI/CD pipelines using GitLab to support continuous integration, delivery, and deployment.
• Develop and maintain automated scripts and tools to enhance DevSecOps processes including SCA (Software Composition Analysis) and container scanning.
• Manage and optimize AWS services including ECS, ECR, Aurora, WAF, Network Firewall, Transit Gateway, ALB, and NLB to ensure secure and efficient cloud infrastructure.
• Implement security best practices in cloud environments, focusing on identity management, logging, monitoring, and incident response.
• Collaborate with development and operations teams to promote a security-first mindset and embed security practices throughout the software development lifecycle.
• Conduct regular security assessments, vulnerability scans, and penetration tests to identify and remediate security weaknesses.
• Monitor and respond to security incidents and anomalies in real-time, providing analysis and recommendations for corrective actions.
• Stay up-to-date with the latest security trends, vulnerabilities, and technologies to ensure robust defenses against potential threats.
• Good to Have: Knowledge in MS Entra, MS Graph API, Node.js, MongoDB, and AWS Lambda (Python Serverless).

Qualifications:

• Education: Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Experience:
  • 2+ years of proven experience in DevSecOps and/or Cloud Services management and deployment, with a strong focus on AWS and/or Azure services.
  • Hands-on experience with GitLab CI/CD pipelines.
  • Experience with security tools and practices including SCA, container scanning, and penetration testing.
  • Good to Have: Experience with GCC-2.0.

Skills:

• Proficiency in managing AWS services (ECS, ECR, Aurora, WAF, Network Firewall, Transit Gateway, ALB, NLB).
• Strong scripting skills (Python, Bash, etc.) for automation.
• Familiarity with containerization technologies (Docker, Kubernetes).
• Excellent understanding of security principles and best practices.
• Strong problem-solving skills and attention to detail.
• Excellent communication and teamwork skills.

Preferred Qualifications:

• Certifications:
  • Required: Associate-level AWS certifications (e.g., AWS Certified SysOps Administrator, AWS Certified Developer).
  • Good to have: Azure certifications (e.g., SC-300, AZ-104).
• Additional Experience:
  • Experience with Infrastructure as Code (IaC) tools such as Terraform or CloudFormation.
  • Background in software development with knowledge of secure coding practices.
• Soft Skills:
  • Ability to thrive in a fast-paced, agile environment.

Proven track record of proactive problem-solving and innovation.

Requirements:

• Comfortable with a 5-year direct contract (with perm benefits)
• At least 5 years of experience in the above domain areas

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS's privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Benefits

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

• Knowledge on Internet Technologies (i.e. routing, switching and general network infrastructure),
• Experience in network operations/maintenance and passionate about providing troubleshooting support
• Strong analytical and problem-solving skills, and has a flair for dealing with technical and operational problems
• Experience in IT audit or CISA/CISM certified preferred or operational risk management and control self-assessment or prior experience in implementing security solution and information security governance
• Enterprise Data Network (administration, patching, upgrade and migration activities), Design, Preparing of HLD/LLD, Implementation Team leading, Service Level management, demand, incident, change management.
• Cisco/Aruba Switching /Routing & WLAN
• DDI, AAA/Cisco ISE
• As Built, LLD, Testing & Acceptance Testing Documentation Skills
• ZScaler & Network Security
• Provide network WAN/LAN design, implementation, consulting, Cisco, Aruba, Juniper
• Network audit Identify the gaps and suggest the remedial solution. Supporting in RFP/RFI response.
• Experience in running operations with ITIL processes / Project Management - PMP