Job description:

· Commissioning, Maintenance, Repair & Troubleshooting of marine electrical & mechanical equipment onboard vessels and in company premisses/workshop ( i.e. Burners, Boilers, Scrubbers, EGE, EBG, GCU and supporting systems).

· Ability and willingness to travel on short notice onboard vessels in region, but occasionally also globally.

· Employees must have ready valid travel documentation, passports, visas, seaman book and vaccinations as required to travel.

· This is full time position, and we welcome experienced candidates of all ages.

· Ensure that the work is executed according to the company’s Quality, Health, Safety and Environment guidelines and customer site procedures and report unsafe practices and incidents.

· Write Service Certificates (time sheets) on site and get them signed by customer.

· Write Service Reports with full details of job done, warn customer on possible safety issues, spare parts required/suggested and giving suggestions & recommendation of future services.

· Proactive recommendation of required/suggested spare parts to Customers.

· Communicate sales opportunities to Service Managers.

· Provide onsite and remote technical support to clients.

Required skills:

· Preferred experience with Boiler & Burners systems, Scrubbers, but it is not mandatory.

· Troubleshooting skills in electrical, electronic & mechanical systems.

· Basic programming skills of PLC (Programmable Logic Controllers).

· Basic parametrisation knowledge of industrial & marine controllers.

· Experience in automation, control and instrumentation devices, pumps, electrical motors, frequency converters, actuators, positioners, …

· Proficient skills in MS Office.

· Fluent written and spoken English.

· Cross cultural awareness.

· Structural and systematic approach when executing tasks.

· Attitude to provide high quality of work results.

· Good communication skills.

· Team player mindset with attitude to share knowledge and experience with Your colleagues.

· Customer oriented approach with effectively prioritizing and executing tasks with clear customer communication with no prestige attitude.

Setup and maintenance of desktops, laptops, phones, printers, peripherals and mobile devices – Windows and Apple Platforms

• Escalate and work with second or third level support/third party vendor on resolution of problem when necessary

Experience in the WOG environment.

• Maintain hardware inventory at assigned locations

• Provision new users with hardware, software and account setup

• Provide with both remote and onsite support for multiple locations, if required

• Troubleshoot and resolve a variety of technical problems

• Assist with network connectivity issues

• Provide great communication and customer service to company employees in person and through phone calls and emails

• Work on assigned tasks and projects including hardware and software rollouts

• Work with hardware / software vendors, whenever required

• Provide training when needed help facilitate users requests and in the implementation of company project

• Provide VPN support including end-user setup and problem

• Work closely with other support teams (client support team, application support team, server support team)

• Develop and document IT operational processes whenever required

Job Role/Level System Engineer (onprem + GCC)

Mandatory Skills Windows

Preferred Skills Windows OS Support & Troubleshooting, Windows Active Directory knowledge

Brief Job Description

Scope of work requested for the services is to provide system support (level 1/2) to manage Government agency servers. It includes the following:

1. Incident Management

a. Monitoring new incidents

b. Working on incidents assigned

c. Troubleshoot and resolve system issues

d. Timely follow-up and closure of incidents

e. Updating and resolving incidents status in ITSM system

2. Service Request Fulfilment

a. Monitoring of new service request (SR)

b. Work on SR assigned

c. Setup and configure new systems

d. Hardening of OS and applications

e. Timely follow-up and closure of SR

f. Updating SR status in ITSM System and closure of SR

g. Updating Asset Management team on asset issued / returned

3. Monthly Patching

a. Patching of systems

b. Testing upon completion of patching

4. 24 x 7 standby support

a. 24 x 7 standby support and to go onsite as and when required

5. Daily health check / Escort vendor

a. Daily health check and submission of daily health check report

b. Escort vendor when request are raised

6. Other tasks

a. Conduct any other tasks as required of a system engineer role

6 PERSONNEL REQUIREMENTS

6.1 The Contractor’s support personnel managing the servers must be trained and minimally be proficient in the following areas:

Windows Server

(a) The System Engineer shall minimally possess the following requirement:

(i) At least three (3) years of experience in Microsoft Server administration;

and

(ii) Microsoft Certified Solutions Associate (MCSA);

Joining Arup

Arup’s purpose, shared values and collaborative approach has set us apart for over 75 years, guiding how we shape a better world.
As a world leader in its field, Arup offers the full spectrum of civil engineering consulting services. As part of the Civil Water and Resources team, this role covers a broad range of skills relating to civil infrastructure. In particular, the focus of the Civil Engineer is to undertake design and consulting services within the Civil Engineering discipline in order to enhance the team’s portfolio of skills and expertise. You will also get the opportunity to work on a variety of Energy, Water, Land Development, Rail and Industrial projects.

The Opportunity
Are you passionate about delivering impactful, innovative, and sustainable infrastructure solutions?

Deliver technical inputs in areas such as earthworks, drainage, HV and EHV cable and substation works, WSUD and ABC Waters design, water transmission and distribution systems, utility diversion works, civil structures and geotechnical works.

In this role, you will:

• Provide design expertise across the project lifecycle, from Master Plan and Feasibility Stages through Concept, Preliminary, and Detailed Design, and offer support during construction phases.
• Contribute to small- and medium-sized projects, while serving as a key team member for larger projects. Your responsibilities will include design, technical documentation, cost estimation, tender preparation, project scheduling, and meeting deadlines and budgets.
• Be responsible for meeting project deadlines, monitoring budgets, managing resources, and controlling expenditure to achieve financial targets.
• Support the growth of Arup’s Energy, Water, and Resources Infrastructure capability in Singapore.
• Collaborate within an extraordinary collective that values individuality, diversity, and innovation, while doing meaningful work that positively impacts clients and communities.

Is this role right for you?
We’re looking for someone with:

• A minimum of 3 years (post-tertiary education) of relevant experience in Civil Engineering, with a focus on designing roads, utilities, and paving elements in a consulting business environment.
• At least 1 year of experience delivering land development projects from pre-concept design to the site phase for clients such as Local
• Government Authorities and/or Private Developers.
• Preferably, 1 year of on-site experience during construction phases.
• Proficiency in highway, paving, and reinstatement design; utility, drainage, and sewer works design; authority submissions; and tender and construction drawing preparation.
• The ability to deliver high-quality design, technical documentation, and cost estimates while meeting deadlines and budgets.

What we offer you
At Arup, we care about each member’s success, so we can grow together. Guided by our values, we provide an attractive total reward package that recognises the contribution of each of our members to our shared success. As well as competitive, fair, and equitable pay, we offer a career in which all of our members can belong, grow and thrive – through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do. We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup’s legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling eligible members to share in the results of our collective efforts.

• Please see a list of Arup’s Singapore benefits below:
• Hybrid working policy & flexible working hours
• 13th month bonus
• Birthday leave
• Paid parental leave for birth mothers 16 weeks & new parents (excluding birth mothers) 4 weeks
• Purchase Additional leave of up to 20 days (permanent employees)
• Paid Annual subscription to relevant Professional association.
• Reimbursement of Professional Engineers application and examination Fees
• International mobility opportunities
• QP allowance
• Site Allowance
• Work related travel insurance
• Dental expense cover
• Marriage leave (3 days)
• Examination leave (2 days)
• Family care leave
• Bike Loans of up to SGD2000

Different people, shared values

Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We are an open environment that embraces diverse experiences, perspectives, and ideas – this drives our excellence.
Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Arup provide an environment where you will make a positive difference. Discover more about life at Arup at www.arup.com/careers/your-life-at-arup. We are committed to making our recruitment process and workplaces accessible to all candidates. Please let us know if you need any assistance or reasonable adjustments throughout your application or interview process, and/or to perform the essential functions of the role. We will do everything we can to support you.

Our Application Process
Please apply directly through our applicant tracking system. Shortlisted candidates will be contacted by Talent Acquisition to discuss next steps. Stay safe online – Arup will never ask for your bank details as part of our recruitment process.
Arup does not accept unsolicited resumes from recruiters or employment agencies.

Job Responsibilities:

• Responsible for the design and development of core Java architecture, solving complex technical problems, ensuring code quality, system performance and security.
• Participate in the planning and optimization of system architecture, and provide suggestions for technical solutions and architecture design.
• Master and apply the latest technology trends to continuously improve the performance and maintainability of the system.
• Lead and guide technical team members to conduct code review, technical guidance and team technical ability improvement.
• Coordinate team resources, assign tasks, and ensure project progress and quality.
• Create an open and collaborative technical atmosphere to help team members overcome technical difficulties and improve their technical level.
• Participate in project demand analysis, solution design, implementation and tracking to ensure on-time delivery of projects.
• Coordinate cross-departmental communication such as product managers and operation and maintenance teams to ensure the smooth launch and continuous iteration of the system.

Job requirement:

• Bachelor’s degree in Computer Science, Engineering, or a related field (master’s degree is a plus).
• At least 8 years of related experience in software development, with at least 8 years in a leadership role.
• Expert in microservice architecture design
• Strong coding skills in SQL/Python/Java/...
• Good communication skills, with excellent technical and business combination ability
• Strong sense of responsibility, good stress resistance, able to maintain clear thinking under high-pressure environment.

• Lead and manage cellular system validation for field test activity in various markets across Singapore.
• 10+ years of experience in the industry with program management, working with cross-functional teams
• 3 years of experience in mobile phone testing of 5G/4G technologies
• Hands on experience with Modems, Cellular, SoC, Network Infrastructure, connectivity and Telephony
• Experience in 5G/4G log analysis and debug issues from field tests
• Experienc with Carrier Certification: PTCRB/GCF or similar
• Development knowledge in Android or IOS or other wireless devices
• Analyze the 5G/4G logs from field test in Singapore and identify keys issues, and work with test and software teams to resolve it.
• Summarize the 5G R15/R16 carrier features, analyze data, and manage bug reporting to drive and secure the Phone modem quality, from modem and telephony perspective.
• Exercise technical acumen to keep goals for programs, projects, and products attainable within a given timeline, while communicating with stakeholders clearly.
• Identify opportunities for field automation and manage development of field automation tools and processes.
• Expertise of cellular radio technologies and features: 3G/4G/5G VoLTE, MIMO, Antenna Design, OSI Stack, 3GPP, IEEE, Etc.
• Experience in using drive test tools ShannonDM, QXDM, QCAT, Android Debug Bridge, Accuver, Nemo, TEMS, Genex Probe, Android Platform
• System-level expertise of Android or Smart Phone OS and its architecture
  Experience in 5G R15/R16 carrier requirements, driving cellular field testing projects across multiple product areas and distributed sites, with engaged resources and priorities
• Experience with 5G (FR2/FR1)/4G Modem/Telephony
• Knowledge of 5G/4G to drive field functional/performance and Carrier test

Requirements:

• Bachelor's or Master's degree in Computer Science, Engineering, or a related field.

• Proven experience as a Big Data Engineer or similar role.

• Strong proficiency in Apache Spark and Scala programming.

• Experience with big data technologies such as Hadoop, Hive, Kafka, etc.

• Familiarity with data warehousing concepts and tools.

• Knowledge of SQL and NoSQL databases.

• Excellent problem-solving skills and attention to detail.

• Strong communication and collaboration skills.

Preferred Qualifications:

• Experience with cloud platforms like AWS, Azure, or Google Cloud.

• Knowledge of machine learning frameworks and libraries.

• Experience with containerization and orchestration tools like Docker and Kubernetes.

EA Number: 11C4879

Job Responsibilities :

• Liaise with client and develop design concepts and basis of design to set direction of design.
• Check engineering deliverables and assure technical integrity of design.
• Ensure all engineering works comply with all relevant Statutory standards, Regulations and Codes of Practices.
• Carry out various types of geotechnical design and analysis – deep excavations, shafts, tunnels, slopes, foundations, etc.
• Carry out appropriate design of structural nature where required.
• Highlight technical issues and update Construction Department on changes and distribute to vendors, engineers and supervisors.
• Plan and execute geotechnical and instrumentation installation and monitoring works.
• Site evalution of soil, rock, fault distribution and geological studies on site to determine their engineering properties.
• Performs other duties or projects as assigned.

Job Requirements:

• Minimum a Diploma, Degree in Civil Engineering, Geology or its equivalent.
• Preferably with a minimum of 2 years of relevant working experiences in construction industry.
• Proficient in Microsoft Office, AutoCAD and Geotechnical analysis software.
• Able to communicate effectively with Client, Consultants, Management and Subcontractors.
• Location: East

Job Description

We are seeking a skilled and proactive DevOps Engineer to join our team. The ideal candidate will have hands-on experience with GitLab CI/CD pipelines, Kubernetes (EKS), and Red Hat Linux administration. Exposure to AWS and cloud security practices is highly desirable.

Key Responsibilities:
Implement and manage CI/CD pipelines using GitLab.
Deploy, manage, and scale containerized applications with Kubernetes (EKS).
Perform routine system administration tasks on Red Hat Linux servers.
Implement and maintain AWS cloud security best practices.

Must-Have Skills:
Hands-on experience with GitLab and CI/CD pipeline configurations.
Proficiency in Kubernetes and Amazon EKS for container orchestration.
Basic/Good knowledge with Amazon Web Services(AWS).
Basic/Good knowledge of Red Hat Linux system administration

Nice-to-Have Skills:
Infrastructure knowledge of PEGA.
Scripting skills in Bash, PowerShell, or Python.
Knowledge of cloud security practices on AWS.
Familiarity with Ship Hats and the GCC 2.0 AWS environment.

Recommended:
Any certifications related to Kubernetes and AWS would be a great advantage."

EA Number: 11C4879

Job Description:
- Attend onboard for maintenance, inspection, repair, troubleshooting, and modification.
- Manage field activities and schedule.
- Resolve malfunctions.
- Oversee repairs and technical improvements.
- Install new systems and technology.
- Ensure proper maintenance of onsite equipment.
- Supervise and direct technicians/engineers onsite.
- Make service reports with details of job progress, working/traveling time, technical advice, and recommendations if any.
- Report and share job progress with the superior.
- Provide technical support and training for customers, service agents, and internal teams.
- Arrange necessary parts and drawings and send them to agents.
- Maintain tools in good condition for safety and high-quality service.
- Create manuals/support documents to share experiences with other engineers.
- Collaborate with team members to achieve better results.
- Gather feedback from customers or prospects and share it with internal teams.
- Review maintenance lists and service reports for sales support.
- Cover all Technician responsibilities.

Job Requirements:
- Minimum diploma in electronic/electrical engineering or relevant.
- Minimum 4 years of experience in vessel main engine automation systems or related field.
- Proficiency in relevant engineering principles, hands-on experience with equipment or systems, and good knowledge of electrical systems.
- Strong problem-solving skills and attention to detail.
- Ability to stay updated with the latest industry advancements and technology.

Compensation:
- Monday to Friday 9am to 6pm
- OT pays
- AWS
- Travel allowance
- Company phone provided
- 14 days AL
- Group insurance covered

• Experienced in the design of water treatment plants (desalination, potable water, recycle water), wastewater treatment plants (municipal and industrial) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S, Piping & Systems/Skids Engineering and Drafting) on development of engineering deliverable on a timely basis.

• Reviewing and providing input to project schedule and ensure all planned dates and progress are realistic. Provide updates on engineering deliverables per schedules and implement catch-up actions where applicable.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

• Assist the Engineering Manager on the development of FAT, SAT, Pre-Commissioning, Start-up, Commissioning protocol and support the implementation.

• Development of Operational & Maintenance Manual.

• Assist the Engineering Manager to support project management team in project implementation related engineering, troubleshooting and maintenance requirement.

• Bukit Timah
• Up to $4000 + Bonus
• Contract (renewable/convertible)
• Monday to Friday (Officer Hours)

Job Responsibilities:

• Plan and supervise contractors for M&E preventive maintenance works such as Crane/Air compressor/Fire protection system/Lift/Cooling tower/ Aircon/ Ejector pump, etc.
• Plan and supervise contractors for building services work such as cleaning/landscaping/waste management, renovation, etc.
• Troubleshoot faults and carry out corrective maintenance such as replace light tubes/fitting, install power points, etc.
• Conduct daily routine inspection for building/M&E facilities works
• Record meter reading to monitor electricity/water consumption.
• Ensure contractor comply with security and safety requirements for corrective and preventive maintenance works
• Raise Purchase Requisition for works/services by contractors/vendors
• Perform acceptance of services completed by contractor e.g. pest control, grass cutting, etc.
• Response to emergency call including after office hours e.g. power failure, fire incident, etc.

Requirements:

• Higher Nitec or Diploma in Facilities Managements or Mechanical/Electrical Engineering
• At least 2 years experience in Facilities/M&E maintenance.
• Prefer Class 2 /3 driving license
• Able to work on weekends for critical repair works
• Able to commit for Alternate Saturday
• Singaporean Only

If you are interested, please click "Apply Now".

Thank you for your application and we regret that only shortlisted candidates will be notified.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to P-Serv Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.p-serv.com.sg/priv.... You acknowledge that you have read, understood, and agree with the Privacy Policy.”

P-Serv Pte Ltd

EA License No: 90C3494

Uma Maheswari | Registration No. R2092012

You may also reach me at + 65 81278347 for further information.

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Reponsibilites

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

Experience with GitLab CI/CD pipelines, Kubernetes (EKS), and Red Hat Linux administration. Exposure to AWS and cloud security practices is highly desirable.

Key Responsibilities:
Implement and manage CI/CD pipelines using GitLab.
Deploy, manage, and scale containerized applications with Kubernetes (EKS).
Perform routine system administration tasks on Red Hat Linux servers.
Implement and maintain AWS cloud security best practices.

Must-Have Skills:
Hands-on experience with GitLab and CI/CD pipeline configurations.
Proficiency in Kubernetes and Amazon EKS for container orchestration.
Basic/Good knowledge with Amazon Web Services(AWS).
Basic/Good knowledge of Red Hat Linux system administration

Nice-to-Have Skills:
Infrastructure knowledge of PEGA.
Scripting skills in Bash, PowerShell, or Python.
Knowledge of cloud security practices on AWS.
Familiarity with Ship Hats and the GCC 2.0 AWS environment.

EA License No: 11C4879 / Registration ID : R1218583

Apar Technologies Pte Ltd, Singapore

Job Description :

• Perform environmental monitoring in various industries such as aerospace, pharmaceutical, chemical industry and etc
• Experience in Compressed Dry Air and Nitrogen Testing
• Day-to-day operations and activities such as noise, water & air sampling, monitoring, and report writing
• Coordination with customers and suppliers

Requirements :

• Degree in Chemical/ Environmental Engineering, Chemistry, or Science-related field
• Minimum 1 year of working experience
• Entry-level candidates are welcome to apply as on-the-job training will be provided
• Must possess Class 3 or equivalent driving license

Work location : 121 Genting Lane, ALS Building, Singapore 349572

Please apply with detailed resume stating current/last drawn and expected salary, and notice period.

We are looking for a candidate passionate about reducing carbon emissions in the built environment through intelligent energy management. We do this via the ENX™ Sustainability AI for the built environment, enabling the integration of IoT sensors and intelligent controls in order to:

• Perform Energy Monitoring
• Optimise ACMV, Lighting and Plug Loads
• Manage Air Quality, Occupancy, Water Quality
• Monitor Data Centre Infrastructure
• Report Sustainability KPIs in real-time

Featuring a modular system architecture, the ENX™ Sustainability AI can be deployed as a cloud-based Building Management System (BMS) for new build projects, or as an Energy Management System (EMS) for offices and warehouses that can integrate seamlessly with existing BMS infrastructure. Our customers have reduced energy consumption by up to 40%.

Responsibilities

• Pre-Sales & Closing: Engage with prospective clients (building owners and facility management teams) to understand their technical requirements, sustainability goals and budget constraints. Identify key decision makers and their objectives. Work with Design Engineering team to scope and update project proposals. Present project proposals, highlighting benefits, technical capabilities and how it meets client objectives. Negotiate on technical requirements and commercial terms. Close orders and hand over to Field Engineering team for project implementation. Update progress throughout pre-sales and closing using CRM software.
• Customer Relationship Management: Build and maintain relationships with building owners and facility management teams. Generate leads for upselling and future projects. Secure contracts from existing clients for SaaS renewals.

Job Requirements

• Degree in Engineering, Computer Science, Business, Marketing or a related field.
• At least 4 years of Outside Sales experience, preferably in building services or enterprise software.
• Good interpersonal and communication skills, passionate about technology, capable of working independently, and highly organized with strong attention to detail.
• Willing to travel to client jobsites within Singapore and Johor Malaysia. Preferably have own transport and driving license.

We are looking for a candidate passionate about reducing carbon emissions in the built environment through intelligent energy management. We do this via the ENX™ Sustainability AI for the built environment, enabling the integration of IoT sensors and intelligent controls in order to:

• Perform Energy Monitoring
• Optimise ACMV, Lighting and Plug Loads
• Manage Air Quality, Occupancy, Water Quality
• Monitor Data Centre Infrastructure
• Report Sustainability KPIs in real-time

Featuring a modular system architecture, the ENX™ Sustainability AI can be deployed as a cloud-based Building Management System (BMS) for new build projects, or as an Energy Management System (EMS) for offices and warehouses that can integrate seamlessly with existing BMS infrastructure. Our customers have reduced energy consumption by up to 40%.

Responsibilities

• Field Deployment: Interpret detailed drawings, Bill of Materials (BOM) and Scope of Works (SOW) issued by Design Engineering team. Plan, coordinate and implement projects at client jobsites, including site assessments, subcontractor management, as well as configuration and installation of our devices and sensors. Document project progress, findings and recommendations for continuous improvement. Provide technical training to clients and end-users on the operation and maintenance of our systems.
• Data Analysis & Field Technical Support: Analyse and interpret data collected from various equipment, devices and sensors, including Building Management Systems, electrical meters, BTU meters, IAQ Sensors and various PLCs. Provide technical support and maintenance services for projects at client premises. Coordinate with Helpdesk to troubleshoot and resolve site issues.

Job Requirements

• Degree or higher in Building, Civil/Mechanical/Electrical/Computer Engineering, Computer Science, Electronics or equivalent.
• At least 5 years of Engineering/IT experience, preferably in Building Services or Industrial Automation with good knowledge of automation, PLCs, SCADA, Building Management Systems, M&E systems, RTU devices and networking equipment.
• Good interpersonal and communication skills, passionate about technology, capable of working independently, and highly organized with strong attention to detail.
• Willing to travel to client jobsites within Singapore and Johor Malaysia.

Job Summary:

As a DevOps Engineer, you will be responsible for automating and streamlining our operations and processes, implementing system enhancements, and maintaining development environments. You will play a key role in integrating and managing our code repositories, artifact storage, and security scanning tools.

Key Responsibilities:

• Manage and maintain version control systems using Bitbucket for continuous integration and collaboration.
• Implement artifact management practices with Artifactory to enable consistent dependency management across projects.
• Utilize SonarQube for static code analysis to ensure code quality and adherence to coding standards.
• Leverage Veracode for application security testing and vulnerability assessment during the software development lifecycle.
• Collaborate with development and QA teams to improve deployment strategies and processes.
• Automate deployment pipelines and improve CI/CD workflows to enhance software delivery.
• Monitor system performance and troubleshoot issues as they arise, providing timely support to the development teams.
• Document systems and processes clearly and maintain version control documentation.

Mandatory Skill Set:

• Proven experience with Bitbucket for version control and collaborative workflows.
• Proficiency in using Artifactory for managing and securing binaries and dependencies.
• Familiarity with SonarQube for code quality checks and best practices in software development.
• Experience with Veracode for security scanning and ensuring the security of applications.
• Strong knowledge of CI/CD principles and practices.
• Mandatory skills Bitbucket, Artifactory, Sonarqube, veracode
• Familiarity with scripting languages (e.g., Bash, Python, or Groovy) for automation tasks.
• Ability to work collaboratively in a team environment and effectively communicate technical information.

Preferred Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Experience in DevOps toolset .
• Familiarity with containerization technologies (e.g., Docker, Kubernetes).
• Understanding of Agile methodologies and iterative development processes.

Design & Drafting: Assist in creating and refining electrical drawings, ensuring they align with project specifications and industry standards.

Calculations: Perform basic load calculations and other engineering analyses required for project development.

Material Management: Generate material take-offs to aid in accurate project planning and cost management.

Project Execution: Support the timely execution of deliverables by coordinating project schedules, resources, and deliverables.

Coordination & Support: Assist in the arrangement of equipment installation, testing, and commissioning activities, ensuring smooth project completion.

Problem-Solving: Collaborate with the manager to address client inquiries and provide effective solutions for electrical issues.

Stakeholder Communication: Maintain consistent communication with clients, vendors, contractors, and sub-contractors to ensure project alignment and success.

Client Relations: Build and nurture strong relationships with customers and clients to foster trust and satisfaction.

Personal Attributes:

• Detail-oriented with a proactive problem-solving attitude.
• Excellent team player with the ability to work independently when required.

Training & Development:

• Specialized training in PLC programming to enhance your skills and career trajectory.
• Opportunities for professional development and certifications.

Additional Perks: Comprehensive support for career growth within a supportive team environment

Responsibilities:

• Assist the project manager with on and off site meeting pertaining to the technical issues
• Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project
• Proven problem solving and achievements work progress according to the work schedule
• Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

• Candidate must at least a Bachelor’s Degree, Post Graduate Diploma in Civil Engineering or equivalent
• Min 2 year relevant experience in the related field for this position
• Be able to work independently with minimum guidance
• Good team player, keen desire to learn, contribute, advance and progress with the company.

Site engineers work chiefly on construction projects. They form part of construction management and use their skills and expertise to guide crew members and ensure the successful completion of a project. Site Engineers frequently liaise with clients and negotiate with vendors and suppliers to secure the best deals.

Quality Engineer

Roles & Responsibilities

This position is responsible for the timely, accurate, efficient preparation and management of Quality System, Quality tracking, Quality assurance & Quality control.

1. Full responsibility of Quality Assurance and Quality Control function to ensure Products quality are meeting customer’s expectation and accordance with regulatory requirements. (Throughout Product Life Cycle)

2. Update and maintain company Quality Management System and Documentation

3. Conduct internal audit and continuous improvement on departmental process

4. Responsible for Customer audit and ISO9001 certification.

5. Prepare for AS9100 certification and implementation.

6. Drive continuous improvement projects that lead to Product Quality and Operational Excellence.

Qualifications & Requirements

1. Bachelor’s degree with at least 3 years relevant working experience.

2. Diploma with at least 5 years relevant working experience may apply.

3. Strong knowledge of Quality system, such as ISO9001/AS9100 and other regulatory compliances.

4. Experienced on Supplier Quality management, In-coming, In-process, Outgoing inspection.

5. Preferably Electronics/Communication industry.

6. Familiar with internal & external audits.

7. Strong communication skill.

8. Possess ERP experience will be added advantage.

9. Fluent in English and Mandarin.

Responsibilities:

• Create analytical 2D and 3D models using Plaxis 2D /3D;
• Carry out detailed geotechnical engineering design and calculations for earth retaining structures and slope stability;
• Prepare geotechnical design calculation reports and drawings;
• Review soil investigation reports and preparing interpretative reports;
• Advise on various types of ground monitoring instruments, and review monitoring results;
• Attend design and site meetings, when required.

Requirements:

• Graduated with Bachelor’s Degree or Master’s Degree in Civil and Structural Engineering / Geotechnical Engineering;
• Familiar with Plaxis 2D/3D software;
• Good communication and inter-personal skills, and project management skills;
• Familiar with Eurocode design procedures;
• Familiar with local building regulations regarding geotechnical work;
• Preferably 3 years’ experience in geotechnical design in a consultancy firm.

Interested applicants can submit a comprehensive resume and expected salary.

Only short-listed candidates will be notified for interview.

The presales consultant will work together with the sales team on selling security solutions to fit the customer’s need. This includes solution design, presentation, demonstration and proof of concept until the closure of an opportunity. The presales engineer will also liaise with and coordinate with the engineering team for the deployment of security projects.

Job Responsibilities:

• Work closely with the sales team in designing and articulating solutions to customer
• Demonstrate the value of the solution to customers
• Gather the Business and technical requirement and develop cost effective solution for the customer
• Conduct Solution demonstration and Proof of Concept (POC)
• Response to tender, RFQs and RFPs
• Establish good relationship with the customer

Job Requirements:

• Diploma/Degree in electrical/electronic engineering, computer science or related discipline
• Experience working in System Integrator (SI) or similar environment an advantage
• Experienced working with Managed threat detection and response, database/Web/application security, OT/IOT, cloud (AWS, Azure, Google) and devsecops solutions
• Strong business acumen
• Have excellent interpersonal, negotiation and analytical skills
• Able to work independently and resourceful in completing task on hand
• Demonstrate excellent verbal and written skills to communicate effectively with cross-functional teams
• Self-motivated individual with passion in the Cybersecurity field
• Certified in Security certification a plus (Such as CISSP, AWS, CCSP)

Job Description

• Provide techinical support to our customers on Data Security product suite as per SLA.
• Support system deployment and User acceptance Testing.
• Perform troubleshooting and issue resolution.
• Work closely with internal stakeholders to provide timely resolution for our customer.
• Carry out planned upgrade and migration work.
• Review and improve process flow as part of continuous improvement initiatives.
• Responsible for maintaining technical documentations in the Knowledge Base.

Qualifications:

• Prior experience as a Technical Support Engineer.
• Prior experience in a customer-facing role with a focus on IT system delivery .
• Strong technical knowledge in IT infrastructure technologies, including networking, virtualization, and related areas.
• Strong problem-solving and troubleshooting skills, with the ability to analyze complex technical issues.
• Excellent communication and interpersonal skills, ability to engage both technical and non-technical stakeholders.
• Proactive attitude and ability to work independently, managing multiple customer accounts and projects simultaneously.
• Experience in supporting government agency is preferred.
• Prior experience in Cryptography would be advantageous.
• Only Singaporean need apply.