Key Responsibilities:

• Carry out implementation activities for plant modifications, capital projects and other identified plant improvement projects in line with defined specifications, and qualification of facilities in accordance with site to approved procedures.
• Provides trouble shooting / continuous improvements to processes / systems.
• Maintain high GMP standard meeting the regulatory expectations such that the site is always inspection ready.
• Monitor and enforce compliance measures (including Data Integrity and safety) within their specific discipline to ensure inspection readiness of plant, as well as participate as an audit team member in the conduct of audits.
• Implementation of the GSK Production System (GPS) for Engineering department.
• Support on shutdown activities and on preventative plant maintenance for various systems at site.
• To support the development of facility master plan to ensure compliance to engineering standards, management of obsolescence and asset replacement.
• Monitor and manage the DCS/PLC systems to ensure constant and reliable support to the plant at all times so as to minimize disruption to the production process.

Skills, Knowledge & Experience:

• Good degree in Controls and Instrumentations - related progream
• Minimum 2 years of Controls experience in the process / pharmaceutical industry
• Experience in Delta V system, especially batch process.
• Experience in SIL calculation and TMR system (Honeywell Safety Manager) will be added advantage.
• Experience in the Siemen PLC system will be added advantage.
• Good understanding of validation process
• Familiar and understanding of Global Engineering Standard (GES) and understanding of industrial standards.
• Basic commercial knowledge & project management skills
• Effective communication & Operational Excellence skills

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

Job Description

• Coordinated with client, engineers, technicians and provided necessary support for process and Safety groups
• Electrical and instrumentation installation work, wiring and terminations.
• Preparation of Electrical and instrument QA/QC documents.
• Performing loop check, safety interlock functioning test.
• Performing the site testing and commissioning of field Instruments.
• Perform Instrument construction, testing, commissioning work. Preparation of punch list and ensure all the punch list items are rectified before client Final Acceptance.
• Preparation of Electrical & Instrument Index, Instrument IO lists, Instruments datasheets/specifications against the P&ID for the proper construction activities.
• Attend emergency site issues and response to site within service level of agreement

Requirements:

• Diploma/Degree in Electrical/Electronic Engineering
• Relevant experience in Pharma, oil & Gas industry of at least 8-12 year.
• Possess basic safety & health experience and computer skills
• Resourceful, earnest, good team player, meticulous and responsible
• Self-motivated,able to multitask
• Good communication and interpersonal skills, ability to liaise with all levels of people
• Good knowledge of local industry
• Good fundamentals of electrical safety and area classifications.
• Good knowledge of Ingress Protection and explosion prof equipment.

We are looking for a Software Test Engineer experienced in manual testing.

• Gain exposure to large scale government projects.
• Salary package up to $6,200.
• Hybrid work arrangement.

Responsibilities:

• Establish quality assurance deliverables for stories in upcoming iterations/sprints, for functional and non-functional test areas
• Work closely with development team to conduct testing of modules developed for application/ system integration and enhancements.
• Create detailed, comprehensive and well-structured test plans and test cases.
• Perform thorough regression testing when bugs are resolved.
• Stay up-to-date with new testing tools and test strategies.

Requirements:

• Degree in Computer / Computer Science, Electronics and Computer Engineering, Information Technology or equivalent.
• Minimum least 3 years of quality assurance/testing experience.
• Experience in Agile development and testing methodologies.
• Testing certifications is an advantage (eg. CSTP, CTAL).

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J52276 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

A quantity surveyor may work for either the client, the contractor or sub-con, working in an office or on site. They are involved in a project from the start, preparing estimates and costs of the work.

When the project is in progress, quantity surveyors keep track of any variations to the contract that may affect costs and create reports to show profitability.

Aside from Quantity Surveyor, he or she will also act as project engineer wherein will take charge of the suprvising the project, adhere to construction procedures, coordinate all work schedule with the main con and liase with project manager and archi coordinator.

He or She should monitor and ensure that the work progress is within project schedules and manage the project independently as well as lead and motivate team.

Estimation of quantities, preparing BOQ, BBS as per drawing.

• Coordinating with Design & Construction team.

• Review engineering drawing and specifications and ensure the correctness of transfer of drawing details to ground, Checking all centering and reinforcement works.

• Physical measurement of quantities and tracking the productivity.

• Ensuring timely resource availability.

• Undertaking cost analysis for repair and alteration done by customer in project work.

• Evaluating completed work and arranging payments

• Ensure quality of structure, works as per drawing and specifications & ensure no rework

• Analyzing outcomes and writing detailed progress reports.

• Preparation of Daily, Weekly and Monthly reports and submitting it to the Management

Help us get ahead of disease together with our GSK Biologics Tuas Business Area

Education required: BS degree from an accredited college/university, preferably in Mechanical or Chemical Engineering discipline with a focus in Process equipment reliability and maintenance

Language requirement: Written and spoken fluency in English

Expected Start date: Immediately

Application deadline: We will close this vacancy when we have enough applications, so please apply as soon as you can so your application can be considered.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

What will you do?

Involve in and not limited to:

Maintenance and Calibration Project, Improvement in process reliability, Equipment troubleshooting, Qualification of new equipment, SOP amendment due to periodic review/CAPA and Continuous improvement Programme.

What will you learn?

You will be expose to but not limited to:

• The different type of equipment that are used for Vaccines manufacturing.
• How the equipment functions and the impact of each equipment have on the production system.
• Liaising with external contractors and vendors for equipment issues and projects.
• Liaising with above site (GSK sister plant outside Tuas) for sharing issue or requesting for support.
• Working closely with quality and production department on understanding problems that are contributed by process equipment.
• Understanding and using the different type of modules in SAP for routine and ad-hoc activities.
• Deeper understanding the requirements of a Vaccines site on producing vaccines.

What are we looking for?

• A lively interest in vaccines manufacturing, the commercial world and the biopharma industry
• Appetite to work as a business partner, building strong relationships with key stakeholders
• Adaptability to change and working under pressure
• Excellent communication skills that help you influence
• Strong problem-solving skills driven by curiosity
• Drive and confidence to trust your own judgment
• Great project management skills and the ability to prioritise

What do we offer you?

• Understand and experience the GSK Culture
• Work with a diversified team of professionals
• Implement technical knowledge and skills that you have acquired at school
• Apply and develop soft skills such as interpersonal, communications and negotiation skills
• Transport to and from site to MRT stations in centralised locations all across Singapore (only for manufacturing sites)

Job Description:

- Prepare weekly reports on vehicle repair status.

- Assist in writing meeting minutes to track outstanding issues.

- Conduct team briefings before starting work.

- Coordinate and manage team assignments and vehicle parking allocation.

- Plan and monitor vehicle sequencing and status for operational tasks.

- Provide documentation support to the Operations Leader for work-related needs.

Job Requirements:

- Degree in Engineering (Mechanical, Electrical, Hydraulic, Automotive, Electrical & Electronics, Mechatronics) or a Diploma in a related field with 5 years of relevant industry experience.

- Strong team player.

- Ability to lead a team effectively.

We are looking for proactive marine service engineer who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components Overhaul and maintenance, general mechanical dismantling and assembly works.

Job Description:

· Inspect, diagnose and troubleshoot and carryout repair, maintenance or reconditioning of marine engines 2 & 4

Stroke Main/Aux Engines, Crankshaft & Camshaft Replacement and other onboard machinery.

· Collaborating with internal teams to address customer needs and provide technical assistance.

· Performing on-site repairs, maintenance and reconditioning jobs onboard the vessels in shipyards, ports,

anchorage or voyage and offshore with the team of service technicians.

· Carry out removal and installation work onboard vessels and general servicing and repair in the workshop.

· Interact with customers during the work execution.

Requirements:

· Diploma/Degree in Mechanical, Marine or Engineering related field.

· At least 5 years relevant experience within the engine overhaul industry.

· Be able to work on board vessel's engine room environment, Shipyards, Anchorage etc and travel overseas for

assignments.

· Excellent technical knowledge and problem-solving skills.

· Possess positive and responsible attitude towards work.

· Able to work with other specialists of the same or lower skill level and successfully complete projects.

· Ability to work independently.

· Ability to create internal and external work reports.

· Able to do overtime and work during weekends and public holidays for urgent repair jobs.

· Salary will commensurate according to experience & qualifications.

Additional Information:

· 5 days’ work week

· Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.

· Variable bonus and better medical benefits.

· Career growth & learning opportunity.

Job Description:

• Conduct global structural analyses, including Ultimate Limit State (ULS), Accidental Limit State (ALS), and global fatigue analyses (FLS) for fixed and floating offshore platforms.
• Develop structural design specifications and provide precise fabrication and construction guidelines.
• Prepare detailed structural analysis reports for foundations, support structures, lifting operations, sea fastening, load-out, and dry/wet tow operations, ensuring adherence to classification society standards.
• Perform collision analyses to evaluate structural impacts and propose mitigation strategies.
• Coordinate with classification societies for design and analysis approvals.
• Ensure structural designs comply with offshore wind industry standards and health, safety, and environmental regulations.
• Collaborate with multidisciplinary teams to integrate structural designs with other engineering disciplines.
• Provide technical leadership and mentorship to junior engineers to ensure quality and timely project deliverables.

Requirements:

• Bachelor’s degree in Marine Engineering or Civil Engineering (minimum).
• At least 10 years of experience in Marine & Offshore projects, including conceptual studies, FEED, and detailed design.
• Proficiency in finite element methods and engineering software such as SESAM, SACS, etc.
• Experience or knowledge in wind farm foundations, offshore substations/structures, and floating wind design/analysis is highly desirable.
• Strong leadership abilities, with a commitment to personal and team development.
• Excellent team player with strong communication skills for interactions with clients and third parties.
• Familiarity with marine and offshore industry standards and codes.
• Exceptional verbal and written communication skills, with attention to detail and effective interpersonal abilities.

The responsibilities shall include, but are not limited to, those contained in the following statements:

1. direct liaison with stakeholders in charge of project services (procurement/ draughting/ assets/ human resources);

2. specify scope of work and budgets for engineering activities, assets and 3rd party activities;

3. to be conversant with all items and conditions of the project both technically and commercially and to have a full understanding of the scope of work;

4. implementation, control and monitoring of overall safety and quality assurance in all project related activities as laid down in the company’s management system;

5. preparation and maintenance of budgets for the project assisted by the cost controller

6. preparation of the monthly reporting internal & external;

7. ensuring variations between actual costs and budget are monitored and controlled;

8. identifying and initiating any variations towards the client or approve/ reject variations from third parties on the basis of the contract T&C’s;

9. liaise with the client and ensure that project meetings are held with relevant personnel;

10. establishing all the resources from company’s departments needed to carry out the project.

11. encourage any technical developments or suggestions that will enhance the overall project engineering or operational efficiency;

12. ensure that all aspects of project administration, engineering and operations fulfil the contract requirements and are conducted in a safe, efficient and profitable manner;

13. conduct all activities within the management system, procedures and work instructions;

14. advise and assist commercial department with tenders for potential work;

15. ad-hoc duties as deemed required to complete the workscope.

• World-leading provider of cargo and load handling equipment (MNC)
• Basic $4,000 - $6,000
• Allowances + OT payable
• Office location: Jurong East-International Business Park

Responsibilities

• Steel Work Supervision: Supervise structural steel repairs, including welding, fabrication, and modifications on RoRo vessels, container vessels, and bulk carriers, ensuring compliance with industry and safety standards.
• Maintenance: Perform preventative maintenance, corrective actions, and upgrades equipment, including RoRo ramps, doors, and hatches.
• Inspections: Conduct thorough inspections of steel structures and mechanical systems to ensure compliance with safety and quality standards.
• Project Management: Lead and manage subcontractors during larger steel repair projects, ensuring the work is completed on time and within budget.
• Customer Support: Establish and maintain excellent relationships with internal and external customers, providing technical support and feedback to the relevant teams.
• Safety Compliance: Adhere to all Quality, Health, Safety, and Environmental (QHSE) standards and site-specific safety protocols.

Requirements

• Min with technical qualification in steel fabrication, marine or other relevant engineering fields.
• Min 2-3 years working experience in supervising steelworks or marine industry.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

JOB RESPONSIBILITY

• Find tender opportunities GeBIZE.

• Prepare Tender and submission.

• Familiar with reinstatement and maintenance work.

• Review and analysis of Tenders Drawings & Documentation.

• Preparing Tender submissions and reviewing Procurement & Reviewing of Contracts, and ensuring compliance.

• Reviewing and commercial management of all projects, to ensure accurate and reliable reporting.

• Review all incoming correspondence from Clients, Consultants & Design Team to identify contractually critical items and to initiate replies.

• Estimating a range of projects in a variety of sectors.

• Improve and implement best practice commercial processes and accurate budgeting.

• Maintain accurate records and provide necessary detailed backup to support commercial tracking and costing.

• On Site measurement of Electrical Services.

• Preparation of specialist sub-contract work packages.

• Preparing monthly Commercial Progress reports.

• Other ad-hoc duties assigned by Construction Manager.

• Marine & Offshore industry
• Basic $3000 - $4200
• 5 days (8.30am – 6.00pm)
• Location: West Area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).

Qualifications

• Min Diploma/ Degree in Electrical with no working experience are also welcome.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

We are seeking an Assistant Marine Engineer (Shore-Based) to support the maintenance, repair, and operation of marine systems and equipment. You will assist in coordinating technical services, overseeing compliance with maritime standards, and ensuring vessel readiness from a shore-based perspective.

Key Responsibilities:

• Assist in planning and supervising maintenance and repair activities for vessels.
• Monitor and ensure compliance with maritime regulations and safety standards.
• Conduct technical inspections and troubleshoot marine systems as needed.
• Coordinate with vendors, suppliers, and ship crews for timely parts procurement and service.
• Prepare technical reports and documentation on vessel performance and maintenance.

Requirements:

• Bachelor’s degree in Marine Engineering or equivalent.
• 5-10 years of experience in marine engineering or a related field (shore-based experience preferred).
• Knowledge of maritime regulations and safety standards (e.g., IMO, SOLAS).
• Strong problem-solving and communication skills.
• Proficiency in using technical software and tools relevant to marine engineering.
• Willingness to travel occasionally for inspections and project oversight.

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

Job Description.

• Maintains project schedule by monitoring project progress and coordinating activities.
• Liase with sub-contractors constantly to ensure timely progress and assisted in preparing progress reports.
• Provide advice and resolve any emerging problems.
• Ensure workmanship, procedures and method statements are in accordance to specified standards
• Orders materials and equipment and takes care of the permits, performing equipment, material, and routine site inspections.
• Orders materials and equipment and takes care of the permits, performing equipment, material, and routine site inspections.
• Ensure site safety and prepare safe work procedure with Safety personnel.
• Establishes and maintains excellent working relationships with clients.
• Any ad-hoc duties as assigned

Job Requirements.

• Diploma or Bachelor of Engineering (Electrical/Mechanical/Civil)
• At least 2 years of relevant working experience
• Good knowledge in detailed design of engineering works
• Familiar with codes of practices, relevant regulations and submission requirements
• Self-motivated and able to work independently.
• Good communication skills, both verbal and written in English

Job Responsibilties

• Coordinating all O&M and plant outage activities to achieve safe, reliable and efficient operation of the Power Station
• Supporting and liaising with relevant Asset/Operation departments for long term power station turnaround planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation
• To fully develop and utilize the CMMS for efficient and effective O&M Planning practice and co-ordination with service provider for license management, backup, individual account management and software upgrade
• Fully utilizing the CMMS to ensure all O&M activities and experiences are recorded to comply with Station, legislative and company policy requirements
• To assist fully with and help implement all HSE practices and a Quality Management System as applied to the Power Station
• Perform review on maintenance plans, monthly maintenance report and consolidation of planned and unplanned outage reports
• Review the completeness and organize the filing of departmental documentations
• Additional tasks and responsibilities given by power plant management
• Provide close and constant liaison between operations and maintenance through the individual coordinators
• Provide data expert analysis and advise on maintenance / operations performance
• Responsible to track , safe keeping of the necessary documentation of “ Management of Change” and ensures the process is closed and updated the changes in CMMS & O&M manuals accordingly
• Preferably with MAXIMO, SAP & PREMAVERA and Microsoft project experience
• Organizing the meetings with 3rd party vendors & MMA( Major Maintenance Agreement) meeting

Job Requirements

• Degree / Diploma graduate in relevant engineering field
• Knowledge on operation and maintenance activities of Combined Cycle Power Plant
• Knowledge on project management and resource planning
• Knowledge in maintaining maintenance record in CMMS
• At least 2 years of relevant working experience in Power Plant Maintenance ideally on a CCPP (any manufacturing industry)
• Experience involvement in technical aspects of Power Plant operation and maintenance
• The post holder shall be medically fit and able to undertake the duties of the post and any additional duties as detailed in the Power Station Emergency Response Plan
• Plant availability, plant reliability, work order performance and outage duration
• Administrator for Power Station CMMS system
• Work in all areas of the plant site (both indoor & outdoor environment)

Responsibilities:

• Perform feasibility study, concept design, front end engineering design (FEED) and detailed designs for concrete and steel structures in Energy and Industrial related facilities such as pile foundation, footings, pilecaps, pipe racks, sleepers, pipe bridge, equipment plinths, underground pipeline culvert, drainage, sewerage, road works
• Prepare related material take off (MTO) for cost estimates
• Prepare tender specifications, project requirement, carry out tender evaluation for projects
• Conduct project presentation to clients and stakeholders
• Project management for engineering works
• Perform authorities’ pre-consultation, submissions and liaison with authorities for necessary approvals and permits

Requirements:

• Degree in C&S Engineering, preferably from a university recognised by Singapore Professional Engineers’ Board (PEB), with strong competency in concrete, steel and foundation design.
• Able to perform concrete and steel structural analysis and design, and preferably also working knowledge in using application related to geotechnical design like Plaxis and Geoslope.
• Experience in marine facilities’ design would be an added advantage
• Minimum 5 years of relevant design experience in concrete, steel and foundation structures, drainage, sewerage and road works, preferably in a consultancy firm
• Candidate with more than 15 years of relevant design experience and/or a locally registered Professional Engineer will be considered for higher position
• Knowledge in Eurocodes, BS Codes. Knowledge in NFPA, API would be an added advantage
• Conversant with local authorities’ requirement, pre-consultations and submissions
• Experience in performing feasibility study, conceptual, FEED and detailed design, preferably, able to perform basic CAD drafting
• Possesses skill in project management, conducting presentation, effective communication and good report writing skills
• Good spoken and written English
• Fluency in spoken and written Chinese would be an advantage
• Able to travel for oversea projects at short notice

Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

• Degree/ Diploma/ Certificate in electrical & electronic engineering (AC & DC motors, lead acid & lithium batteries, electrical control circuits)

• years of hand on troubleshooting experience

• customer support experience

• ability to work as part of a team and possess strong communication skills

• local driving licence is a plus

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

We are looking for Cloud Security Lead to pioneer in developing, implementing, and managing cloud security solutions to safeguard the organization's data and infrastructure. This role entails collaborating with cross-functional teams to ensure secure cloud environments while addressing emerging security challenges.

Details

• Working location: Central
• Working hour: 9am to 6pm / 10am to 7pm (Flexible arrangement), hybrid work arrangement
• Salary package: Up to 13K + AWS + Attractive Bonus Scheme
• Others benefits: Group insurance, above industries standard leave benefits, good employee welfare, annual dinners, cruise events, overseas trip, learning & development etc.

Responsibilities:

• Develop and execute cloud security strategies and roadmaps, provide leadership and direction to the cloud security team, aligning efforts with organizational objectives.
• Promote security best practices and foster a culture of security awareness across the organization.
• Design and deploy secure cloud architectures and solutions, evaluate and recommend security tools and technologies to enhance cloud security.
• Develop and manage IAM strategies to ensure secure and compliant access to cloud resources.
• Implement and enforce IAM policies, procedures, and controls for managing identities, roles, and permissions.
• Establish, enforce, and monitor cloud security policies and procedures.
• Ensure adherence to industry standards, regulations, and best practices (e.g., GDPR, HIPAA, NIST).
• Conduct regular security audits and risk assessments to identify and mitigate potential risks.
• Lead incident response efforts for cloud security incidents.
• Conduct root cause analysis and implement corrective actions to prevent future incidents.
• Partner with DevOps, IT, and development teams to integrate security into all stages of the software development lifecycle (SDLC).
• Collaborate with external vendors and partners to ensure robust security solutions.
• Regularly analyze security logs, alerts, and reports to detect and respond to threats.
• Prepare and present security metrics and reports to senior management.

Requirements

• Min 7years of experience in cloud security, with expertise in AWS, Azure, or Google Cloud Platform and min 2years in lead position.
• Strong understanding of cloud security & cloud infrastructure architectures, frameworks, and best practices.
• Relevant certifications such as OSCP, CISSP, CCSP, or AWS Certified Security – Specialty is a plus point.
• Knowledge of container security, Kubernetes, and microservices architecture.
• Hands-on experience with cloud security tools and services (e.g., AWS Security Hub, Azure Security Center).
• Proficient in security technologies such as IAM, encryption, SIEM, IDS/IPS, and vulnerability management.
• Familiarity with regulatory and compliance frameworks (e.g., ISO 27001, SOC 2).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

• Low Yong Wei (Wyman) - R1550983
• ScienTec Consulting Pte Ltd - 11C5781

Role Summary:
As a Process Engineer, you will oversee machine operations and ensure that all preparations are conducted aseptically before production begins. You will coordinate between technicians and maintenance staff to ensure smooth operations and effective teamwork.

Key Responsibilities:
• Oversee daily machine schedules, production targets, and machine maintenance.
• Resolve worker issues and coordinate activities to meet company goals.
• Train new employees on equipment operation and safety procedures.
• Maintain ISO9001, ISO13485, and GMP documentation standards.
• Ensure workplace safety and cleanliness.
• Drive continuous improvement in quality and process efficiency.

Requirements:
• Diploma / Degree in mechanical , chemical engineering field with 1-3 years of relevant working experience.
• Planning experience is an advantage.
• Open to work shift working hour

How to Apply:
Interested candidates, please submit your updated resume by using Quick Apply button
We regret to inform that only shortlisted candidates will be informed.

Yip Seow Thung
Registration Number: R24121304
EA License No: 18C902

At Temasek Laboratories@NTU, our mission is to undertake cutting-edge research in defence science and technology, driving new solutions and advancements across various research areas, including Microsystems Technology, Hardware Assurance, Signal Processing, Advanced Materials, Advanced Laser Technology, and Emerging Technologies.

Microsystems Technology Development Centre (MTDC) at TL@NTU is having ISO certified III-V Wafer Fabrication Line up to 100-mm diameter wafers with strong industrial/academic experienced Technical Specialists/ Engineers/ Scientists. We are a fast-paced research facility that designs, develops, and manufactures integrated chips, i.e. heterogeneous system in package modules, for defence and commercial applications.

We are looking for a hands-on Thin Film engineer who demonstrates a positive attitude, collaborates well in a team, and possesses strong technical abilities along with sound problem-solving skills.

Key Responsibilities:

• Work with the module leader and execute the design of experiment (DOE) using advanced techniques such as sputtering, evaporation, and chemical vapor deposition (e.g. SiO2, SiON, TaN, Au, Ti, Al, Ni, Pt and etc.).
• Develop and optimize deposition parameters to achieve precise film thickness, uniformity, and quality.
• Help to identify and troubleshoot process issues, working towards yield enhancement and performance improvement.
• Utilize a range of characterization techniques, including optical microscopes, surface profiler, SEM, Ellipsometer to analyze thin film properties.
• Maintain detailed documentation of processes such as standard operating procedure (SOP), experimental setups, and results for future reference and knowledge transfer and including training.
• Oversee the operation of laboratory equipment and ensure proper functioning. Work with the equipment vendor to conduct routine maintenance, troubleshooting, and calibration of equipment to minimize downtime.
• Work with the University’s procurement team to source and acquire necessary equipment. Evaluate and select vendors, ensuring equipment aligns with research requirements and budget constraints.
• Adhere to laboratory safety protocols and ensure compliance with University and regulatory standards.
• Collaborate with different modules and team members.
• Communicate effectively with team members, providing updates on processes and status of equipment.

Job Requirements:

• Diploma in Engineering (e.g. Microelectronics, Electrical & Electronics Engineering, Material Engineering) with 3 years of relevant working experience or Bachelor’s degree in any Engineering (e.g. Microelectronics, Electrical & Electronics Engineering, Material Engineering).
• Hands-on working experience in semiconductor fab/cleanroom environment in Thin Film area preferred (e.g. SiN, SiO2, TaN, Al, Au, Ti, Ni, Pt and etc.).
• Ability to create and analyze DOE for Thin Film process.
• Experience in wet bench processes, especially the lift-off technique, is essential.
• Basic knowledge in semiconductor fabrication process and device physics.
• Strong understanding of thin film materials and their properties, with expertise in process optimization and troubleshooting.
• Excellent problem-solving skills and ability to work effectively in a collaborative team environment.
• Strong communication skills, with the ability to convey complex technical concepts clearly and concisely.
• Commitment to maintaining high standards of safety, quality, and professionalism in all aspects of work.

We regret to inform that only shortlisted candidates will be notified.