Job Description:

• Perform global structural analysis with all major connection detail ULS/ALS.
• Perform global fatigue analysis with all major connection detail FLS.
• Perform complete structural analysis reports for all main structure foundation, support, lifting, sea fastening, load out, dry & wet tow up to classification society approval level.
• Able to perform steel beam design such as ULS bending, shear, bucking verification and SLS deflection verification using the beam section properties.
• Perform mesh load transfer for structural analysis.
• Perform structural design specification.
• Perform main scantling and steel weight calculation.
• Perform structural construction standard in detail engineering.
• Perform Collision analysis.
• Design and perform all kind of major structural connection detail and analysis.
• Coordinate with classification societies for design and analysis approvals.
• Design and drafting of all structural drawings such as hull lines plan, structural category plan, deck loading plan, full penetration welding plan, scantling drawings, major connection scantlings etc. (Optional)

Requirements:

• Academic qualification in Marine/Ocean Engineering or Civil Engineering
• Minimum 8 years of relevant working experience in the whole process of concept/basic design/detail engineering of semi-submersible substructure/floater design in Floating Offshore Wind Turbine (FOWT) or offshore rig industry.
• Proficient in software packages in SESAM Genie, SACS, Python and AutoCAD
• Good knowledge of all regulations such as DNV, ABS, BV, IEC etc.

Description

• Design and optimization of mechanical components for HVAC systems
• Analysis of mechanical systems, including structural, fatigue, thermal and vibration
• Develop manufacturing drawings in accordance with applicable standards
• Construct and build developed systems
• Collaborate and interact with external vendors for component selection, manufacturing and system assembly
• Read, interpret and review technical drawings, schematics, and computer-generated reports
• Generate operating procedures and provide technical information
• Collaborate and analyze customer design proposals, specifications and requirement, and to evaluate and propose solutions

Requirements

• Bachelor’s degree in mechanical engineering or equivalent engineering degrees
• Diploma with good experience in mechanical design and system assembly will also be considered
• Good mechanical aptitude and knowledge
• Proficient in SolidWorks and modeling
• Excellent problem solving and project management skills
• Background in HVAC engineering is a plus
• Experience in product development especially in HVAC product development is a plus
• Technically sound coupled with experience in sourcing, negotiation and cost control
• Possess initiatives, logical thinking and good analytical abilities, and able to resolve issues from multiple perspectives.
• Passion for the job and a challenging spirit preferred.
• Strong communications and interpersonal skills

Are you up for the challenging next step in your career? Stolthaven’s Asset Management – Projects department is looking for a Project Engineer who responsible for execution of the technical projects (Capex) for the terminals.

As a Project Engineer, you will be the project manager and have responsibility for the engineering and construction of projects, including all relevant project management tasks.

In this dynamic role, your responsibilities range from construction and modification of physical assets to providing engineering support to the Asset Manager in the design and construction of bulk liquid storage facilities and related equipment. Within the local and global Asset Management teams, you will share knowledge & experience on your specific project or engineering discipline expertise and be involved in efforts to train Asset Management colleagues or other Stolthaven functions.

As part of the local Asset Management team, you will work in close cooperation with the MR&I Engineer, Maintenance Supervisors and other roles for developing project cost estimates to existing and proposed facilities in consideration of environmental and customer requirements. The position is also responsible for review and quality control of field construction work, although potentially supported by Construction Supervisors. Implements programs for compliance with all government and regulatory requirement and other technical areas.

SHVN Stolthaven Terminals a division of Stolt[1]Nielsen Limited (SNL), is the specialist storage provider of bulk liquids: Chemicals, clean petroleum, gases, vegetable oils, biofuels and oleochemicals. Our mission is to be the most respected global storage provider, delivering safe, high-quality, sustainable storage and handling solutions for our customers around the world.

Key Responsibilities

1. Provides comprehensive technical and management support on all technical projects assigned by the Asset Manager. Typically class I & II capex projects. This includes, but is not limited to:

• Prepare project details, scope engineering documents and cost estimate for the execution of the capex program together with (main) contractors and other departments and disciplines
• Prepare Requests for Quotation and other procurement documents in close cooperation with Stolthaven’s procurement team
• Responsible for coordination of procurement and or contracting of materials and services for your projects together with Stolthaven procurement
• Governance on quality and legal and or safety requirements during the whole project including execution
• Responsible for commissioning and closing of the project to operations and maintenance and ensure closure of project including timely completing of as-built files
• Responsible for leading change process in case of scope change
• Responsible for safety, quality, progress and cost control and reporting during the project
• Sets priorities and project scheduling for completion of projects within required deadlines
• Provides input to Manager of Engineering as required to complete monthly cost and schedule tracking reports on capital projects
• Supervises contractors in activities related to new construction, modifications to existing facilities and plant repair items
• Responsible for leading project evaluations and Management of Change processes for the projects at hand.
• For larger projects, this role can also be part of a project management team whereas the responsibilities are defined by the Project Manager.

2. General multi-disciplinary engineering works, such as:

• Support the preparation of technical proposals for improvements of technical installations
• o Proactively identifies technical risks in projects and seeks for mitigation
• o Providing assistance in the formation of annual capital budget forecasts
• o Ensure all systems within the facility are designed, installed, and maintained in accordance to local, state and federal regulations and standards

3. Support or promote innovations, new products and methods by:

• Meeting with vendors to acquire knowledge to technical advancement, cost control and alternate solutions to typical terminal design and maintenance requirements
• Attending continuing education seminars and conferences to acquire knowledge pertinent to technological advances and regulatory changes
• Interacts with other initiatives for example in Risk Based Inspection meetings contributing to standardized way of working over terminals and within team by working on corporate projects assisting the global Asset Management team

4. Enforces established plant safety and environmental policy and procedures as related to assigned projects and related tasks.

Qualifications

1. Bachelor/Master degree in Mechanical Engineering, E&IA, Civil or related field

2. Proven track record in an engineering design position, preferably in the field of storage tanks or in a related industry

3. Must be familiar with all applicable standards and codes relating to bulk liquid storage facilities for the applicable terminal location. This could include IEC, API, EEMUA, ANSI, NFPA, NEC, OSHA, and CFR and any other (local) codes.

4. Project management experience is preferred field

5. Minimum 5 years progressive engineering experience in terminal or related industry

6. Minimum 10 years progressive experience in terminal or related industry may be accepted in lieu of a degree

7. Self-motivated to ‘close the loop’ with actions and administrative responsibilities

8. Fluency in English and preferably in Chinese (read & write) as the job requires liaising with our Taiwan joint venture

9. Able to build and maintain both internal and external relations on various levels

10. Able to communicate effectively both verbally and in written

11, Proven safety leadership and service mindedness

12. Competences: self-motivated, flexible, stress resistant, result driven, team player, humour

13. Requires advanced conceptual thinking in complex and/or completely new situations and analytical skills

14. Must be computer literate with specific skills in MS Office

15. Knowledge of and experience with planning software (e.g. MS Projects, Oracle Primavera etc.) and Autodesk products (e.g. Autocad) is considered an advantage

16. Occasionally the ability and willingness to work weekends and/or holidays to accomplish critical project assignments

17. Depending on the required engineering discipline, have knowledge of the following:

• Mechanical: Must have in-depth knowledge of all standards and codes relating to bulk liquid storage facilities applicable to the location, such as API, ANSI, NFPA, NEC, OSHA, CFR, PGS
• EI&A: Must be familiar with all standards and codes relating to bulk liquid storage facilities applicable to the location, such as ATEX, IEC, IEC61511, SIL applications, field instrumentation
• Affinity with IT network components (e.g. firewall and basic networking setup) and experience with FAT for E&I system, panels, automation, etc.
• Knowledge and experience with reviewing drawings such as P&ID, Single Line Diagram, MCC drawings and other E/I/Automation specifications, calculations and drawings
• Knowledge and experience with ACAD and E-plan drawings
• Experience with trouble shooting E&I installations

18. Willing to working in Jurong Island (Company transport is provided at designated pickup point)

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: 5 days’ work week (Mon-Fri), 8.30am to 5.30pm
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members
• Company Transport is provided as designated pick-up point

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our terminal

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

Stolt-Nielsen Limited is a long-term investor and manager of businesses, focused on opportunities in logistics, distribution, and aquaculture. The Stolt[1]Nielsen portfolio consists of its (three) global bulk-liquid and chemicals logistics businesses – Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI).

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Job Description:

1. Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
2. Perform electrical and Instrumentation troubleshooting.
3. Able to work and trouble shoot with AC low voltage single phase and 3 phase systems.
4. Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
5. Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
6. Experience in 3 phase generator control interfacing to grid power.
7. Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva).
8. Understand and develop electrical panel schematics if needed.
9. Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting.
10. Update and control of Electrical specification, procedure and drawings
11. Material Management including consumables, parts and spare unit
12. Responding to breakdowns, diagnosing faults, record and report.
13. Review and approve of service, repair and overhaul equipment, record and report.
14. Managing routine 5S at the maintenance workshop, store and work area at site.
15. Communicate with clients, consultants, project personnel and relevant authorities.

Job Requirements:

1. Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
2. At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations.
3. Strong Electrical Knowledge.
4. Results oriented individual with robust technical abilities.Able to work independently and in a team.
5. Possession of LEW is an advantage.
6. Knowledge of preventative maintenance systems and their administration.
7. Knowledge of Maintenance and Asset Management is an advantage.

Others:

1. Working hours: Monday to Friday (8am to 5pm)
2. Company Transport / Transport Allowance $120 if candidate possess own vehicle to work
3. Sign-On Bonus

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Senior Engineer – Mechanical (Building Services) to join our Building Services team in Singapore.

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

• Leading mechanical services (HVAC) design for building projects
• Assume responsibility and undertake engineering tasks of increasing scope and complexity
• Responsible for analysis of information, production of design, tenders, proposals and technical report writing
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• In charge of jobs control, planning, monitoring, progress and job cost reporting
• Communicate effectively with the client, sub-consultants, contractors, and other parties relevant to the job
• Assist in assessment and review of designs prepared by others on behalf of the clients
• Liaise with authorities on plans submission and compliance

Pre-Requisites

• Degree in Mechanical Engineering
• At least 5 years experiences in consulting firm
• Leading roles experience in ventilation & air-conditioning (HVAC, Plumbing & Drainage) design & design management of commercial, healthcare or school projects will be an advantage
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style

Job Highlights

• Career Advancement
• Medical & Telecommunication Allowance
• AWS, Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and professional development opportunities along with a supportive and caring work environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply online now with your CV.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

We are looking for a Software Test Engineer experienced in manual testing.

• Gain exposure to large scale government projects.
• Salary package up to $6,200.
• Hybrid work arrangement.

Responsibilities:

• Establish quality assurance deliverables for stories in upcoming iterations/sprints, for functional and non-functional test areas
• Work closely with development team to conduct testing of modules developed for application/ system integration and enhancements.
• Create detailed, comprehensive and well-structured test plans and test cases.
• Perform thorough regression testing when bugs are resolved.
• Stay up-to-date with new testing tools and test strategies.

Requirements:

• Degree in Computer / Computer Science, Electronics and Computer Engineering, Information Technology or equivalent.
• Minimum least 3 years of quality assurance/testing experience.
• Experience in Agile development and testing methodologies.
• Testing certifications is an advantage (eg. CSTP, CTAL).

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J52276 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

Position Overview

Be responsible to research and develop innovative computer vision/deep learning algorithms for image applications.

Responsibilities

1. Research, develop and optimize computer vision/deep learning algorithms for image applications, such as, object recognition, face recognition, video analytics, image quality enhancement, and 3D reconstruction.

2. Explore, design and implement new algorithms/features according to marketing requirements.

3. Algorithm testing and verification.

4. Algorithm integration in system architecture.

Requirements

1. Ph.D. or MS with equivalent practical experience in Computer Science or Electrical Engineering or related disciplines such as Applied Mathematics/Statistics.

2. Broad knowledge in various computer vision related topics such as deep learning, object recognition (detection, classification, segmentation) and tracking, stereo, and/or 3D reconstruction; candidate with image sensor knowledge is a plus.

3. Strong knowledge and extensive hands-on experience of independent algorithm research; candidate with strong mathematics background is a plus.

4. Excellent C/C++ programming skills, proficient with scripting languages (e.g. Python or Matlab), and extensive experience with OpenCV.

5. Excellent verbal and written communication skills.

We are looking for Data Analyst/Engineer to join a fast growing IT company!

• Exciting opportunity to work with a team of professional to deliver high quality applications
• Permanent position, positive working environment
• Salary up to $7,000 + AWS + bonus

Responsibilities:

• Develop, construct, test and maintain data architectures such as databases, data warehouses and large-scale data processing systems
• Design and develop data pipelines/systems for data modelling, mining and production
• Ensure the data architecture is in place to support routine and ad-hoc requirements of data analytics team, stakeholders and the business
• Leverage on variety of programming languages and data crawling/processing tools to make raw data clean and highly available for use in descriptive and predictive modelling
• Recommend and implement ways to improve data quality, reliability, flexibility and efficiency
• Ensure data assets and data catalogs are organized and stored in an efficient way so that information is easy to access and retrieve
• PL/SQL and SQL Tuning and optimization of newly develop and existing applications

Requirements:

• At least 3 years' working experience in data architecture, data warehousing, data processing, data modelling and ETL/ELT, familiarity with real-time streaming solutions.
• Working experience in Kubernetes-based DevOps practices such as container orchestration, CI/CD pipelines, and microservices deployment.
• Working experience in database development (Oracle SQL/PLSQL) and familiar with AWS cloud environment

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email [email protected].
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Liew Chien Hui (Vivian) - R2090138
ScienTec Consulting Pte Ltd – 11C5781

Responsibilities:

• Identifies, troubleshoot problems and performs root cause analysis study of equipment failures, recurring breakdown, and equipment defects in order to take effective corrective and preventive
• Liaises closely with Engineering on technical specifications required for machinery fitting, documenting the project requirements for the arrangement of machinery, equipment and system installation work
• Assists with the preparation of procedures, risk assessment, HSE work method statement and etc. under the supervision of senior team members and Project Manager to ensure all the requirements have been fulfilled
• Prepares job-list, work schedule and planning of manpower resources (i.e. yard and contractors) and facilities, working closely with the team members
• Participates in project meeting with Project team members and stakeholders to note on project specifications and report on the status of the work progress
• Liaises closely with HSE department and subcontractors for proper on-site coordination, working with QA/QC team members, owners, statutory and classification authorities on inspection arrangement and compliance review
• Maintains the equipment/ machineries at the workshop and on-board, ensuring the proper working condition, timely calibration, repair, or servicing as required
• Understands emerging engineering practices by participating in educational opportunities, professional organisations; reading professional publications and maintaining personal networks
• Recommends changes to work method/ process by reviewing the workflow and work process to implement changes for improvement and to achieve operational effectiveness and functionality

Requirements:

• Bachelor’s degree in Mechanical Engineering/ Marine Engineering or related engineering disciplines
• Entry Level candidates are welcome to apply (On Job Training will be provided)
• Excellent proficiency in English (written and spoken)
• Must be able to board ships, enter confined spaces with limited visibility and have the ability to climb up and down stairs and/or ladders of varying heights.
• Good in planning, organizing, and interpersonal skills and able to work independently

Working hours & locations:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide Transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Key Responsibilities:

• Carry out implementation activities for plant modifications, capital projects and other identified plant improvement projects in line with defined specifications, and qualification of facilities in accordance with site to approved procedures.
• Provides trouble shooting / continuous improvements to processes / systems.
• Maintain high GMP standard meeting the regulatory expectations such that the site is always inspection ready.
• Monitor and enforce compliance measures (including Data Integrity and safety) within their specific discipline to ensure inspection readiness of plant, as well as participate as an audit team member in the conduct of audits.
• Implementation of the GSK Production System (GPS) for Engineering department.
• Support on shutdown activities and on preventative plant maintenance for various systems at site.
• To support the development of facility master plan to ensure compliance to engineering standards, management of obsolescence and asset replacement.
• Monitor and manage the DCS/PLC systems to ensure constant and reliable support to the plant at all times so as to minimize disruption to the production process.

Skills, Knowledge & Experience:

• Good degree in Controls and Instrumentations - related progream
• Minimum 2 years of Controls experience in the process / pharmaceutical industry
• Experience in Delta V system, especially batch process.
• Experience in SIL calculation and TMR system (Honeywell Safety Manager) will be added advantage.
• Experience in the Siemen PLC system will be added advantage.
• Good understanding of validation process
• Familiar and understanding of Global Engineering Standard (GES) and understanding of industrial standards.
• Basic commercial knowledge & project management skills
• Effective communication & Operational Excellence skills

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

Job Description

• Coordinated with client, engineers, technicians and provided necessary support for process and Safety groups
• Electrical and instrumentation installation work, wiring and terminations.
• Preparation of Electrical and instrument QA/QC documents.
• Performing loop check, safety interlock functioning test.
• Performing the site testing and commissioning of field Instruments.
• Perform Instrument construction, testing, commissioning work. Preparation of punch list and ensure all the punch list items are rectified before client Final Acceptance.
• Preparation of Electrical & Instrument Index, Instrument IO lists, Instruments datasheets/specifications against the P&ID for the proper construction activities.
• Attend emergency site issues and response to site within service level of agreement

Requirements:

• Diploma/Degree in Electrical/Electronic Engineering
• Relevant experience in Pharma, oil & Gas industry of at least 8-12 year.
• Possess basic safety & health experience and computer skills
• Resourceful, earnest, good team player, meticulous and responsible
• Self-motivated,able to multitask
• Good communication and interpersonal skills, ability to liaise with all levels of people
• Good knowledge of local industry
• Good fundamentals of electrical safety and area classifications.
• Good knowledge of Ingress Protection and explosion prof equipment.

Job Responsibilities:

1. Assisting and supporting technical sales team in terms of scope of supplies and costing with respect to electrical, automation requirements during the prospecting stage for water/wastewater related systems and projects.
2. Liaising and communicating with agents/distributors/OEM partners/end-user customers on technical details and specifications of parts and components where EICA works are concerned.
3. Design and producing electrical, control panel drawings (AutoCAD or Eplan), BOM list generation and hardware component selection.
4. Developing PLC programming & HMI project (Siemens /Allen Bradley etc) for all process and functional controls of water/wastewater related systems and instrument.
5. Liaising, negotiating, and managing sub-suppliers/sub-contractors in Singapore and in the region with respect to procurements of all wiring and cabling works, fabrication and assembly of control panels for systems as well as for in-situ installation of water/wastewater related systems or projects.
6. Determining and monitoring procurement and production progress and schedules where cabling and wiring works, control panels’ PLC works and supplies are concerned.
7. On site electrical installation supervision, electrical panel testing, instrumentation configuration, loop test and automation commissioning works.
8. Compiling and handing over operation and maintenance (O&M) manuals (electrical and PLC portions etc) to our agents/distributors and end-user customers.

Requirements:

• Diploma / Degree in Electrical Engineering or Computer Science.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Minimum 5 to 8 years of working experience in Water Industry or engineering projects would be advantageous.
• Knowledge of PLC programming (Siemens /Allen Bradley etc)
• Willingness to travel locally or to regional countries occasionally for site installation, trouble-shooting or testing and commissioning duties at clients' project sites
• Able to work independently and a good team player.
• Senior position will be considered for candidates with more experience.
• Candidate who are able to start work within short notice or immediately would be advantageous.

Job Description & Requirements:

As a Frontend Engineer, you will be responsible for architecting and developing efficient, reusable, and visually appealing frontend systems for a trading application powered by AI models and LLMs. You'll work closely with cross-functional teams, including backend engineers, AI engineers, product managers, UI/UX designers, and the product design team to deliver a responsive, engaging user experience across web and mobile platforms. Your expertise will ensure a seamless blend of aesthetic and functionality.

Key Responsibilities:

• Architect, design, and develop efficient and reusable frontend systems (Web/Mobile)
• Collaborate with backend engineers, AI engineers, UI/UX designers, product managers, and other stakeholders to build comprehensive, architecturally sound, and visually appealing frontend solutions
• Optimize code to improve scalability, reliability, security, and performance of web and mobile applications
• Design interactive components, especially for chat-based and generative UI, to create dynamic LLM-powered user experiences
• Write comprehensive tests for all developed features to maintain software quality and reliability
• Documentation of design and architecture.

Qualification & Skills:

• Minimum 6 years of professional experience as a Frontend Engineer
• Expert in HTML5 / CSS3 / ECMAScript 6 + / TypeScript. Strong preference for candidates experienced with Tailwind CSS
• Proficient in modern frontend frameworks, including React and Vue, and/or React Native for mobile
• Skilled in state management tools such as Redux, Pinia
• Experience with API design principles, RESTful API integration and familiar with React Query
• Strong understanding of client-side performance, optimization.
• Deep knowledge of scalability, reliability, and security considerations in modern web development.
• Familiarity with LLM application development and generative UI/interactive components, particularly for chat-based applications
• Excellent collaboration and communication skills to work effectively across teams

A quantity surveyor may work for either the client, the contractor or sub-con, working in an office or on site. They are involved in a project from the start, preparing estimates and costs of the work.

When the project is in progress, quantity surveyors keep track of any variations to the contract that may affect costs and create reports to show profitability.

Aside from Quantity Surveyor, he or she will also act as project engineer wherein will take charge of the suprvising the project, adhere to construction procedures, coordinate all work schedule with the main con and liase with project manager and archi coordinator.

He or She should monitor and ensure that the work progress is within project schedules and manage the project independently as well as lead and motivate team.

Estimation of quantities, preparing BOQ, BBS as per drawing.

• Coordinating with Design & Construction team.

• Review engineering drawing and specifications and ensure the correctness of transfer of drawing details to ground, Checking all centering and reinforcement works.

• Physical measurement of quantities and tracking the productivity.

• Ensuring timely resource availability.

• Undertaking cost analysis for repair and alteration done by customer in project work.

• Evaluating completed work and arranging payments

• Ensure quality of structure, works as per drawing and specifications & ensure no rework

• Analyzing outcomes and writing detailed progress reports.

• Preparation of Daily, Weekly and Monthly reports and submitting it to the Management

Job Description:

• Aggressively build, maintain and grow accounts & relationships with key clients to achieve sales earnings and management established targets & objectives
• Grow products sales revenue and earnings per client
• Create, identify and solicit aggressively new project potentials by proactively sourcing for sales opportunities
• Identify, Qualify, Present, Negotiate and Close complex deals
• Build and maintain strong relationships with major clients and trading partners
• Tender preparation / assessment of commercial viability to bid, review technical requirements, customer specification review, best vendor assessments, deriving costing estimates, product / vendor sourcing, commercial negotiations
• Maintain high level of customer satisfaction by following up closely with inter-departments, customers & vendors during pre-sales, order, or post -sales processes to deliver end results effectively
• Sales forecasting, project coordination, after sales support, sales presentations
• Participate in trade shows, exhibitions and conferences
• Prompt submission of reports
• Provide product on networking and data-communication products/solutions within an industrial application environment
• Developing solutions, design & consultancy
• Providing pre-sales advice and consultancy on systems
• Interface with principals on technical aspects of products and solutions
• Manage, develop, build and maintain strong relationship with principals and partners on focal products/solutions under its charge
• Keep abreast of new developments and innovations and/or improved related product applications in areas of responsibility
• Additional role may be assigned by management from time to time.

Job Requirement:

• Diploma or Higher in electrical & electronics engineering or equivalent
• At least 1 year of relevant experience in BD or sales role
• Experience in IT industry or related industries an advantage
• Knowledge of industrial & commercial telecommunication systems and its applications
• Experience in the promotion of industrial and/or telecommunication systems, with proven track records in securing projects related to Telecommunication Solutions (such as network, ex-proof and electrical products)
• Technical experience with industrial and/or telecommunication systems and good understanding of equipment specification is an advantage.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

Responsibilities:

• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in all electrical engineering designs, calculations, preparing bill of materials including measurement and sizing, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in construction, installation, testing and commission activities.
• Able to use autocad/drafting software and also guide drafters for drafting

Requirements:

• Good team player. Can work with others harmoniously.
• Willing to learn new activities.
• Good communication skills in English both written & spoken.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Must know how to operate and draw in AutoCAD.
• Must know basic fire and gas detection knowledge.
• Must know how to operate MS office (minimum Word and Excel).
• Prepared to travel if required for overseas meeting
• Min Diploma/ Degree in Engineering or related field.

Job Description & Requirements

* Design, analysis and plan for Civil & Structural engineering works
* Liaise with consultants, contractors & authorities from inception to completion of projects on C&S matters
* Responsible for timely submission of plans and reports to authorities and clients
* Manage projects to meet the time, cost and quality objectivies
* Coordinate and monitor work progress at site including periodical site inspection and attending meeting
* Assists in other ad hoc duties as assigned

Requirements:

• Able to work independently with minimal guidance.
• Proficient in MS Office/Excel
• At least 3 years of local construction experience
• Knowledge in AutoCAD / BIM software is added advantage.
• At least Diploma/ Degree in Civil & Structural engineering or equivalent recognized by the Professional Engineers Board
• Fluent in English , Good project management and communication skills

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Investigate and analyse incidents pertaining to rotating equipment failure or malfunction in order to identify root causes of problems and recommend & implement solutions.
• Identify, analyse and troubleshoot machinery deficiencies and make recommendation for improvement.
• Monitor and review implementation of Preventive Maintenance program to achieve high plant availability.
• Monitor Condition Monitoring program, analyse and propose recommendations for predictive maintenance.
• Establish programs and initiatives to maximize plant availability and equipment reliability

• Degree in Mechanical Engineering
• At least 4 years' experience in maintenance of plant equipment especially rotating machinery, preferably in oil/petrochemical or related industries

Addcel are looking for Senior Project Engineer who has experience in Project Implementation for Mechanical works especially Piping, Structural Steel and Tankage works. Follow through the whole project lifecycle from estimation, tendering, detail engineering to project management and implementation.

Responsibilities:

• Estimation and MTO
• Tendering & Proposal
• Value and Detailed Engineering
• Drafting using AutoCAD
• Project Planning, Documentation and Support
• Capture project progress and additional/ change orders
• Others as and when required by the management.

Requirement:

• Min. 2 - 5 years of relevant working experiences
• Min. Degree in engineering or equivalent
• Excellent skill in MS Office

Introduction:

The Energetix Sustainability Suite is an Enterprise IoT platform using AI to integrate sensor data streams and intelligent controls to perform Energy Monitoring, optimise Lighting, Plug Loads and ACMV, manage Air Quality, Occupancy and Data Centre Infrastructure. Our customers have reduced energy consumption by up to 40%.

We are looking for a candidate passionate about reducing carbon emissions in the built environment through intelligent energy management.

Job Description:

• Overall responsible for all aspects of the project implementation lifecycle. Plan, coordinate, and execute IoT deployments to help digitalize the built environment, including the site assessments, installation and configuration of devices and sensors to monitor and optimize energy consumption. Collaborate with multidisciplinary teams, including software engineers, data analysts, and facility managers, to design and implement effective monitoring and control solutions. Provide field technical support and maintenance for projects, working closely with Helpdesk to troubleshoot and fix site related issues. Document project progress, findings, and recommendations for continuous improvement.
• Analyze and interpret data collected from IoT devices to generate actionable insights for clients and stakeholders and to feed AI engines. Provide technical support and training to clients and end-users on the operation and maintenance of IoT systems. Instrumentation / IoT Devices will include electrical meters, BTU meters, IAQ Sensors, Controllers and various types of sensors and controllers as well as interfacing with Building Management Systems and PLCs.
• Work closely with Account Managers, Consultants and Contractors to engage customers, drive understanding of our solutions, influence tender specifications, qualify and perform demos and POCs and Pilot projects.

Job Requirements:

• Degree or higher in Building, Civil/Mechanical/Electrical/Computer Engineering, Computer Science, Electronics or equivalent.
• At least 5 years of Engineering/IT experience, preferably in Building Services or Industrial Automation with good knowledge of automation, PLCs, SCADA, Building Management Systems, M&E systems, RTU devices and networking equipment.
• Good interpersonal and communication skills, passionate about technology, capable of working independently, and highly organized with strong attention to detail.
• Willing to travel within Singapore and Johor Malaysia.

Work Scope:

• To repair electrical and electronic component of plastic processing machinery and equipment.
• To modify electrical and electronic circuit of machinery and equipment for upgrading, data logging & process automation etc.
• To install or de-install electrical works for factory building or machinery.
• To conduct periodical maintenance for electrical and electronic related works.
• To update and maintain electrical circuit drawing of all machinery and installation.
• To design and build new machinery that may improve production efficiency of factory.
• To assist in procurement for components and parts.
• To keep tooling in organized manner.
• Other duties as and when assigned by the company.

Job Requirement:

• Diploma or certification in Electrical Engineering or a related field.
• Minimum of 3 years of experience in industrial electrical maintenance.
• Able to read single-line diagram.
• Hands on experience in electrical installation and cabling
• Able to work independently with discipline.
• Have teamwork and is committed.
• Able to cooperate on overtime arrangement.
• On-job-training will be provided.

Working Conditions:

• Full-time position with potential for overtime.
• May require working in various environmental conditions, including high noise levels and confined spaces.
• Must be able to lift and carry heavy equipment as needed.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage