Duties/Responsibilities

Drive Project Operations Dept.

1. Assists Project Manager to overseas the projects in charge

2. Ensure the project engineering issues are on schedule/within budget

3. Work closely with Engineering Service dept. to ensure accurate & updated construction drawing

4. Work with Supply Chain & Procurement on machinery and materials orders

5. Monitor all the material wastage

6. Deployment of resources (manpower, material, machineries) required to achieve project schedules

7. Ensure the sub-contractors to achieve project requirement & schedule

Prepare Risk Management Plan

1. Build contingencies in to the plan to provide a reserve in the schedule for unforeseen future problems

Administer Workplace Safety and health (WSH) and Environmental Management Systems (EMS)

1. Ensure workers/sub-contractor comply with the company safety regulation

Organise and Proper Handover the Completion Project

1. Ensure proper accurate handover of construction documents to the Clients

2. Ensure the Sub-contractor submit the proper handover documents to the company

3. Ensure the project deliver by us and sub-contractor to client(s) on schedule with "0" defect

Manage a Team with Good Technical Knowledge

1. Build and train a competent Supervisor, Leadmen and worker team

As work roles evolve over time, company may change your job scope, based on organizational needs and employee abilities, from time to time.

Job Responsibilities

- Supervise Plumbing & Sanitary installation works.
- Discuss with Main Contractors, Sub-Contractors & Suppliers and Consultant if necessary.
- Documentation of method statement and work procedures.
- To develop, monitor, and review site construction activities to ensure work completion as scheduled.
- Manpower arrangement and supervise/manage site arrangement.

Working Day: 6 days per week

Job Requirements

Min 3 years experience in similar experience and managing a few sites.
Knowledge of Plumbing/Sanitary and Gas as an Advantage.

A chemical manufaturing company located in the West is looking for electrical engineer.

Job Scope :

• Assist with electrical wiring and installation
• Attend to electrical breakdown and maintanance
• Design electrical diagram for the maunfacturing process line
• Troubleshoot on electrical fault and error
• Carry out preventive maintenance
• Assist wtih electrical sub-station servicing
• Able to work with Automation and SCADA

- In charge if production, scheduling ,planning and coordination of the assigned projects

- Liaise with contractors on the requirements of the projects

- To asisst the Site Manager in the coordination and execution of the projects

- To perform the duties which are assigned from time to time

- Must possess at least a Diploma in Civil or Building, degree or equivalent

· Please include your current and expected Salary in your resume

· Identify & develop new business opportunities

· Establish new accounts as well as maintaining with existing customers

· Meeting Company objectives and expectations

· Marketing function for new products

· Corresponding with customers on quotations and purchase order related issues

· After Sales service calls

· Diploma in Mechanical or other disciplines with or without experience.

· Dynamic, outgoing personality and self-motivated.

· Able to work independently as well as a team player in a fast paced and pressurized environment.

· Class 3 Driving License and possess own vehicle will be an advantage.

Endress+Hauser is a global leader in measurement instrumentation, services, and solutions for industrial process engineering. We provide process solutions for flow, level, pressure, analytics, temperature, recording and digital communications, optimizing processes in terms of economic efficiency, safety & environmental impact.

Our customers come from various industries, including chemical, food & beverage, life sciences, power & energy, mining, minerals & metals, oil & gas, and water & wastewater. Although we employed close to 16,000 individuals worldwide, we remain a family-owned company and family-owned companies are different. We believe that competent and motivated employees are the crucial factor for future success.

Become part of our team and write the next chapter in this success story with a career at Endress+Hauser, "Driving Progress Together".

Key Responsibility

• To work closely with sales, service, and industry managers in a team approach to serving customers. To perform out-door sales activities to achieve the agreed sales targets.
• To promote and develop existing customers in Singapore for Endress+Hauser products, services and solutions in the industries assigned to your team.
• To provide customer service, build and maintain good customer relations, solve problems, attend to complaints, and provide effective customer support, to achieve the best customer experience from end-to-end.
• To develop sound customer relationships at all levels and keep the accounts plan and forecast regularly updated in Salesforce Lightning CRM.
• To work closely with colleagues internationally, joining our global network to ensure the best of service to our customers and to be an active participant in Kaizen and Lean projects.
• To respond to and follow up on customer enquiries and specifications for products and systems or packages based on E+H products, services and third-party suppliers and pass on clear instruction to Internal Sales Engineer to prepare quotations and proposals in SAP, in a timely manner.
• To be responsible for sales functions, like customer visits, product demonstration, negotiations, complaint handling, providing technical assistance and advice, following up of quotations, closing orders and customer liaison.
• To assist in marketing activities, like exhibitions, seminars, presentations, direct mailing, etc.
• To assist service department in satisfying customers’ after-sales and commissioning service requirements, where applicable.
• To execute agreed strategic plans in an organized way.
• To promote digital sales and meet/exceed assigned targets.
• To be always polite and customer oriented

Requirements

• Diploma in Electrical engineering or its equivalent
• At least 3 years' relevant experience.
• Experience in Sales/Business Development, Project Management or Engineering related industry
• Proven sales records of achieving sales target.
• Knowledge of SAP and Salesforce will be an advantage

1. Need to arrange suitable workers

2.Nee to arrange the materials

3.site visit and supervise the works

4.daily report need to submibt

Job Responsibilities

• Responsible for equipment technical management and electrical operation management of electrical, instrumentation and DCS.
• Responsible for keeping records of various electrical instrument operations, equipment defect records, etc.
• Implement the company's various goals and indicator management plans, conduct production operation analysis and reduce power consumption.
• Assist operating personnel in training to prevent the occurrence of various operating accidents.
• Responsible for revising and adapting the operating procedures and technical materials of the electrical major, and responsible for the review and archiving of electrical work tickets and operation tickets.
• Carry out accident investigation and analysis work in the electrical profession.
• Responsible for formulating electrical maintenance and technical improvement plans.
• Responsible for the company's electrical inspection and maintenance management, and be proficient in the daily inspection and maintenance of DCS systems, networks, cameras, instruments and other electrical equipment.
• To carry out price and analysis and conduct purchase or contract negotiation with vendor and ensure the materials are acquired at best pricing
• Responsible for the formulation, implementation and internal assessment of 7S standards for electrical instrumentation.
• Any other duties and responsibilities to be assigned by Supervisor, HOD and the Management from time to time within the JE Group.

Job Requirements

• Diploma or Degree in Degree in Electrical, Mechanical, Instrumentation engineering or the equivalent.
• Minimum 3 years’ experience on mechanical maintenance of waste management preferred.
• Good communication skills
• A good team player
• problem solving skills
• Working Area: Tuas South Avenue
• Experience in Power Plant industry is an advantage

Site Engineers person oversee the on-site activities for projects, manage construction operations, and ensure that plans and specifications are accurately implemented. They are responsible for coordinating with the team, resolving technical issues, and monitoring progress to ensure successful project execution. Ensuring safety, health and environment conformation

Job Responsibilities:

• Design Gas Compression package, Power Generation package, Process Module (dehydration, refrigeration, seawater treatment system, etcs), for oil & Gas production facilities, ie FPSO, FPU, offshore fixed platform, etcs.
• Coordinate with other engineering disciplines to ensure compliance with standards (API, DEP, etcs) and clients’ specifications.
• Collaborate with clients and principals for design optimization.
• Participate in technical meetings (Hazop, Technical Clarification meeting), may require overseas travel.
• Any other ad-hoc as assigned

Job Requirements:

• Minimum Diploma / Degree in Chemical Engineering or Mechanical Engineering.
• Strong analytical, communication and presentation skills.
• A self-motivated team player with a high level of creativity and initiative.
• Willing to travel occasionally.
• In house & overseas training will be provided if required.
• Able to work independently in a flexible, dynamic and fast-paced environment.
• Positive working attitude.

Working hours: 8am to 5pm

Transport provided at the nearest MRT.

For keen applicants, please email [email protected]

Job Description:

• Perform structural analyses for fixed and floating offshore structures, including global and local assessments.
• Design and optimize marine and offshore structures to meet project requirements and industry standards.
• Prepare structural design specifications, drawings, and technical documentation for fabrication and construction.
• Conduct finite element analysis for load-bearing structures, considering factors such as fatigue, buckling, and impact.
• Assist in the preparation of technical reports, including global analysis, fatigue life evaluation, and strength assessments.
• Assist in the preparation of technical reports, including global analysis, fatigue life evaluation, and strength assessments.
• Collaborate with multidisciplinary teams, including naval architects, mechanical engineers, and project managers.
• Provide support during fabrication, installation, and commissioning phases to ensure structural integrity.
• Coordinate with clients, classification societies, and third-party reviewers to obtain design approvals.

Requirements:

• Bachelor’s degree in Marine Engineering, Structural Engineering, or a related field.
• Minimum of 5 years of experience in structural engineering, preferably in marine & offshore projects.
• Proficiency in structural analysis software such as SACS, SESAM, or equivalent.
• Strong understanding of structural design principles, finite element analysis, and material behaviour.
• Knowledge of industry standards and codes, including AISC, API, ISO, DNV, or other relevant guidelines.
• Excellent problem-solving skills with attention to detail and accuracy in calculations.
• Strong communication and interpersonal skills for working in a multidisciplinary team environment.
• Ability to prepare clear and concise technical reports and documentation.

Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

• Minimum 8 years of engineering experience with recognised Degree in relevant field
• At least 5 years of supervision experience of E&M work in the construction site for projects of similar scale, complexity and nature of work
• Candidate must have LTA/ MRT/ rail projects background

About the Company:

The company started with civil engineering contracts and progressively expanded into addition and alteration, demolition, civil engineering, and general building works.

Job Responsibilities:

• Assist the Project Manager in overseeing the complete lifecycle of projects, including planning, coordination, execution, and control.
• Assist in building and guiding project teams, providing direction, and support to achieve project goals.
• Assign tasks and responsibilities to team members, ensuring effective resource allocation.
• Develop and maintain project timelines and regularly monitor progress.
• Assist in generating reports that outline project status, issues, and proposed solutions.
• Address conflicts and resolve issues within the project team.
• Analyze and troubleshoot problem areas, adjusting strategies as required.
• Mentor and motivate team members, fostering a positive and accountable work environment.
• Undertake additional tasks and assignments as they arise.

Job Requirements:

• Hold a Diploma/Degree in Civil Engineering.
• Possess a minimum of 2 years of experience in the civil engineering industry.
• Exhibit strong communication skills.
• Have relevant on-site experience.
• Possess excellent problem-solving abilities.
• Can work effectively under pressure and take initiative.

How to Apply:
Interested candidates, please submit your updated resume by using Quick Apply button
We regret to inform that only shortlisted candidates will be informed.

Yip Seow Thung
Registration Number: R24121304
EA License No: 18C902

We are seeking a skilled and motivated Project Engineer / Senior Project Engineer specializing in ship repair and ship refit. The ideal candidate will have at least 5 years of relevant experience in the maritime industry and possess strong project management and technical skills. This role involves managing repair and refit projects from initiation to completion, ensuring compliance with technical, quality, and regulatory requirements.

Job Description

1. Project Management:

• Manage ship repair and ship refit projects, from planning through execution and delivery.
• Develop detailed project schedules, budgets, and resource plans.
• Coordinate with clients, vendors, and internal teams to ensure project objectives are met.

2. Technical Expertise:

• Oversee progress and technical requirements for repair and refit projects.
• Interpret technical drawings, design documents, and specifications.
• Provide guidance and suggestion to production teams during execution.

3. Quality Assurance:

• Ensure all ship repair and refit work adheres to established quality standards.
• Conduct inspections to verify compliance with design specifications and classification requirements.
• Address quality issues promptly with effective corrective actions.

4. Regulatory Compliance:

• Ensure all work complies with relevant maritime regulations and standards.
• Collaborate with regulatory bodies to secure necessary approvals and certifications.

5. Communication and Coordination:

• Maintain clear and effective communication with clients, team members, and stakeholders.
• Provide regular project updates and reports to management and clients.
• Facilitate problem-solving discussions to address challenges and maintain progress.

6. Risk Management:

• Identify potential risks to project timelines and budgets.
• Develop and implement mitigation strategies to reduce impact.
• Monitor risks and adapt plans as needed to maintain project success.

Qualifications:

• Min. of Diploma in marine engineering, Mechanical Engineering, or a related field.
• Minimum of 5 years of experience in ship repair or refit project engineering.
• Strong understanding of ship repair processes, techniques, and materials.
• Proficient in project management with a proven ability to deliver projects on time and within budget.
• Strong leadership, organizational, and team collaboration skills.
• Excellent communication and interpersonal abilities.

Preferred Attributes:

• Familiarity with High-speed craft systems and operational requirements.
• Experience coordinating with regulatory authorities and international clients.
• Completion of SRM (Shipbuilding and Repair Management) course is an advantage.

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

The ASRS Operation Engineer is responsible for the maintenance, repair, and operation of Automated Storage and Retrieval Systems (ASRS) equipment to ensure optimal performance and uptime. This role involves performing preventive maintenance, diagnosing, and resolving technical issues, and supporting system upgrades and modifications to meet operational requirements. Taking up the role of Team leader of the shift.

Responsibilities:

• Operate ASRS equipment, including automated cranes, conveyors, and control systems, to perform material handling tasks such as loading, unloading, and storing goods in designated locations.
• Follow maintenance schedules and perform routine inspections and preventive maintenance tasks on ASRS equipment.
• Diagnose and troubleshoot mechanical, electrical, and software issues affecting ASRS equipment performance, using diagnostic tools, schematics, and technical manuals.
• Conduct repairs and replacements of defective components or parts, such as motors, sensors, actuators, bearings, and PLC modules, to restore equipment functionality.
• Coordinate with equipment vendors or service providers for technical support, spare parts procurement, and warranty/contract repairs as needed.
• Assist Maintenance Team in implement software updates, firmware upgrades, and system modifications to enhance ASRS performance, reliability, and safety.
• Monitor system operation through computerized interfaces or control panels, and respond promptly to alarms, error messages, or abnormal conditions.
• Ensure smooth operation with the aid of warehouse control system (WCS) and Humane Machine Interface (HMI).
• Ensure compliance with safety regulations and company policies by following proper lockout/tagout procedures, wearing appropriate personal protective equipment (PPE), and adhering to safety protocols during maintenance activities.
• Document maintenance activities, repair logs, equipment histories, and spare parts inventory using computerized maintenance management systems (CMMS) or other digital record-keeping tools.
• Provide training and technical support to operators and maintenance personnel on ASRS operation, troubleshooting techniques, and safety procedures.
• Participate in cross-functional teams for system upgrades, capacity expansion projects, or process improvements related to ASRS operations.
• Shift schedule planning, arrangement, and execution.
• Managing inventory accuracy, stock replenishment, and space utilization within the warehouse or distribution center environment. This role involves coordinating with various teams to ensure timely inventory transactions, cycle counts, and adjustments to maintain optimal inventory levels.

Qualifications:

• High school diploma or equivalent; technical diploma or certification in mechatronics, automation, or related field preferred.
• Proven experience in maintenance and repair of automated material handling systems, such as ASRS, conveyor systems, robotics, or similar equipment.
• Strong mechanical aptitude with knowledge of electrical, electronic, and hydraulic systems.
• Familiarity with PLC programming, HMI interfaces, and industrial control systems (e.g., Siemens, Allen-Bradley) is desirable.
• Ability to read and interpret technical drawings, electrical schematics, and equipment manuals.
• Excellent problem-solving skills and attention to detail in diagnosing complex technical issues.
• Effective communication skills and ability to work independently or as part of a team.
• Willingness to work flexible hours, including weekends or evenings, and respond to emergency calls as needed.

♦ Close supervision, Management and execution of construction works at site, including monitoring work progress and quality

♦ Manage, vendors, contractors and Sub Con for progression of work

♦ Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities' regulations.

♦ Responsible for the project quality and safety plan.

♦ Liaise with consultant and contractor for Green Mark certification processes

♦ Ensure company ISO and OHSAS requirements are fully implemented on project.

♦ Coordinating with authorities, clients, consultants and subcontractors on all project aspects.

♦ Work closely with Engineering team on any technical issues arising from site and lead the supervision and resolution of work onsite

♦ Ensure proper documentation and records of site works are carried out

1，Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Environmental/Health/Safety) or equivalent.

2. At least 3 year relevant experience construction.

3，Required skill(s): MS Office, AutoCad.

4，Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.,

5，Independent, proactive positive work attitude

*We regret that only shortlisted candidates will be notified.

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills

Purpose: Responsible for the complete end-to-end planning, direction, and coordination of all the manufacturing processes related to system integration for a specific project. Together with the program team, the Manufacturing Engineer is to ensure that assembly can meet costs, quality, and delivery requirements.

Key Area of Responsibilities:

• Design of production layout to enable production to fulfill build plan forecast or pre-defined production run rate.
• Define requirements for assembly tools and equipment to support product realization and build plan.
• Participate actively in PQP to ensure that risks are identified, and preventive actions defined and implemented.
• Implement a certification program for assembly to ensure that assembly module leads are trained and certified to carry out specific assembly tasks.
• Collaborate with the Process Engineer in the design of the assembly Kit Kart for issue of materials into the clean room and effective handling of materials inside the production area.
• Lead in resolving technical problems faced by Assembly, and resolve internal and customer quality complaints.
• Monitor assembly capacity of the program, and perform ramp assessment when required, to fulfill build plan system delivery.
• Contribute to the system build progress meetings together with the program team to meet on-time delivery targets.
• Evaluate assembly efficiency and implement improvements to achieve the calculated standard time.
• Monitor all customer's consigned equipment to ensure all are inventoried, calibrated, and maintained regularly.
• Identify and implement improvements to shorten production cycle time, improve overall production efficiency, improve quality performance, enhance safety or to boost sustainability.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering)
• At least 3 year of experience as an engineer in the manufacturing assembly environment.
• Strategic, creative, and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

• Research, design, and develop new circuits, technology, modules, and devices
• Strategise on architectural and electronic designs, product pipelines, and new potential technology and devices
• Identify, analyse, recommend, and develop next-generation improvements for existing circuits, technology, modules, and devices
• Conduct evaluations and recommend modifications on existing designs and prototypes based on performance in quality test and customer feedback
• Ensure reliable and consistent performance and function of existing designs for circuits, technology, modules, and devices in operating environments
• Perform circuit analysis, run simulations, create schematic drawing and PCB layouts, and produce wiring programs using respective softwares
• Design, develop, and execute testing and investigation methods / procedures for circuits, technology, modules, and devices with the use of Automated Test Equipment (ATE)
• Prepare engineering sketches and specifications, design and test documentation, product specification or Bill of Materials (BOM), and product development timeline
• Coordinate with relevant teams to ensure design manufacturability and testability
• Keep updated on technology and regulation development

Requirements:

• Good understanding of electrical engineering codes, electronic systems, component materials and safety standards
• Possess hands-on experience using design and calculation software
• Strong analytical, problem solving and conceptualisation ability
• Strong interest in technology
• Ability to think outside the box and manage complexity
• Strong team player and customer-oriented with strong interpersonal and communications skills
• Proactive, enthusiastic with “can do” attitude
• Meticulous, self-reliant and strong sense of urgency
• Committed, motivated and able to handle multiple tasks simultaneously

Main Responsibilities:

• Taking care for infrastructure support such as servers, storages, VMWare, Firewall (Checkpoint), cisco Switches, wireless AP, VPN, etc.
• Assist 1st level / 2nd level support on any technical related issues.
• Administering and overseeing network infrastructure
• Provide support for video conferencing (Microsoft Teams), and meeting equipment, projector, microphone, etc.
• Provide knowledge transfer for the projects deployed to end-users.
• Manage, support, train users for Microsoft 365 services, such as Outlook, OneDrive, SharePoint, Teams, etc.
• Support IP phone, printers, projectors, display TV, CCTV, and door access, with the assist from vendors.
• Any other Technical related tasks as assigned.

Job requirements:

• Min Diploma in IT / Computer Science / relevant field or higher.
• At least 5-years experience in a similar position is preferred
• Knowledge and experience in cyber security will be an advantage.
• Experience in Network, routing protocol.
• Knowledge of Active Directory, DNS, GPO, Office 365, SQL Server, Druva etc
• Good communication skills and fluent in common language.

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical/Metallurgical engineering or equivalent.
3. Must have valid API 510, API 570, API 571 and API 653 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience in Shell Bukom Singapore.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping, tanks and columns.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.