JOB DESCRIPTION

· Understand the product requirement and create SOC system level architecture according to the requirement.

· Understand the use case and create system level test plan.

· Define design specification for new hardware modules, together with IC design engineer.

· Work with IC design engineers to resolve the issues during design phase and qualify the design.

· Understand the design specification of existing hardware modules and make improvement.

· Perform FPGA validation before tape out and silicon verification after tape out

· Provide support for any issue reported from customer.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with firmware development experience Familiar with SOC design, including bus architecture, memory sub-system, video signal processing, etc.

· Familiar with standard peripherals, such as UART, I2C, SPI, I2S, PWM, SD, flash controller, etc

· Familiar with IC design activities, such as RTL coding, timing analysis, etc.

· Familiar with lab equipment

· Knowledge in WIFI/Bluetooth physical layer or MAC operation is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

JOB DESCRIPTION

• CP test program development.
• Work with designer to develop test programs, debug programs, solve problems.
• Work with commissioned factory to identify, propose, prioritize and implement test automations.
• Design automated test scenarios accordingly to test plan with its acceptance criteria
• The commissioned testing factory product management.
• Test plant test plan management. Ex: prepare test environment, test data, update functional test scripts according to changing requirements
• Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency
• Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

• Bachelor’s/ Master’s degree in Electronical Engineering ,Computer Science, Software Engineering or other equivalent degree/experience
• Strong VBT scripting skill and C++ programming background
• Good written and verbal communication skills in English and Mandarin is required to liaise with Chinese associates/clients
• Able to work well both independently as well as in a team
• Singaporeans are welcome to apply

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

JOB DESCRIPTION

· Understanding of the customer requirements and developing technical solutions for customers.

· Strong collaboration with several stockholders including customer, sales and marketing, RD team.

· Support customers during the all development cycle from design specification until mass production.

· Exposure to schematics and PCB layout design review.

· Direct contact with customers implies excellent communication skills.

JOB REQUIREMENTS

· Bachelor’s degree or above in Electronic Engineering or related majors

· Min 3-5 years of relevant work experience in semiconductor

. Must has outstanding hardware and RF bring-up experience for WLAN + BT combo, as well as best expertise of OFDM/OFDMA, MIMO, RF component knowledge and front-end matching.

. Proficient with multiple tools for board design, such as OrCAD, Allegro, impedance calculation, ADS simulation and other RF/digital simulation on board level.

. Strong communication and interpersonal skills to handle whole board design process, debug critical issue, optimize RF matching, decent documentation technique.

· Familiar with Litepoint IQxel tester, R&S CMW tester, spectrum analyzer, signal generator, network analyzer, power meter, attenuator, and other WLAN/BT test equipment is an advantage.

· Strong customer management and problem-solving skills

· Good communication and team working skills

· Singaporeans are welcome to apply

Working Location: Jurong Food Hub

Responsibilities:

Purchasing -

• · Handle all purchasing activities
• · Review and implement policies, procedures and internal controls for procurement activities
• Responsible for Order Placement Timing, Supply & Demand Alignment, Material replenishment and Supplier Performance
• Continuously monitoring, evaluating and improving supplier performance
• Source the most cost-effective material for the company
• Stock level projection
• Purchasing budget control.
• Monitor delivery times to ensure timely delivery
• Managing the procurement suppliers’ relationships for the Company
• Regular negotiations with suppliers on purchasing prices
• Resolve disputes and claims with vendors and suppliers.
• Prepare Monthly or Weekly purchase & inventory report
• Analysis of sales forecast accuracy, stock movement and aging stock
• Liaise with finance department with regards to cycle count and inventory reconciliation
• Work closely with the sales team to support with daily B2B customers invoicing.
• Ensure Monthly closing report is completed within deadline (Inventory report for all outlet & warehouse)
• Handle unforeseen situation related to inventory and stock matters in all outlets, work closely and provide support to operation outlet team in all restaurant activities
• Organize Monthly stock take activities on selected outlet
• Airport pass application for delivery suppliers
• Other ad-hoc duties when required

Logistic (Import/Export and Delivery Operations) –

• Planning Shipment from overseas suppliers
• Ensure timely & accurate arrival of shipment through close liaison with 3PL, freight forwarder supplier & distribution.
• Prepare and check all shipping documents such as B/L, packing list, certificate of origin etc. to ensure that they are complete and comply with AVA import and export rules and regulations
• Coordinate AVA inspection when shipment arrive at warehouse
• Book cargo space and purchase insurance for shipments
• Liaise with Freight Forwarder, transportation, etc. to ensure timely clearance and delivery of shipments
• Import & export arrangements
• Manage the delivery and logistic team in the Company
• Manage and plan regular vehicle maintenance to ensure minimal disruption to delivery operations
• Other ad-hoc duties when required

Requirements:

• Diploma in related field preferred
• At least 2 years of relevant work experience
• Advantage for candidate with experience from F&B industry
• Work at Jurong Food Hub

Email your resume to [email protected] to apply!

• Meet Ship Superintend at ongoing vessel at Anchorage or PSA, inspect
• refrigeration, accommodation air-conditioner systems, package type air-
• conditioner, split type air-conditioners.
• Repair the equipment as per customer’s requirement or services or retrofit,upgrade the entire system.
• Supply brand new refrigeration and air-conditioning compressor or re-
• conditioned compressors as per buyer requirement.
• Supply, install package type air-conditioners, split type air-conditioners.
• Supply refrigeration & accommodation air-conditioner compressor parts,
• lubrication oil and refrigerant.

1.1. Broad Functions:

As part of the technical services team, the Chemist is responsible for managing and control of the lab polymerization facilities. They need to design, optimizing for creating polymer materials and support the production processes such as scale up, trouble shooting and improvement.

1.2. Job Description / Responsibilities:

1.2.1. Development

1.2.1.1. Design and synthesize new polymers with desired properties for various applications.
1.2.1.2. Conduct experiments to understand the relationship between polymer structure and its physical and chemical characteristics.
1.2.1.3. Analyse and interpret data from various techniques like spectroscopy, chromatography, and thermal analysis to characterize polymers.

1.2.2. Polymer Production and Processing

1.2.2.1. Develop and optimize production processes with productivity and cost effectiveness.
1.2.2.2. Troubleshooting issues arising during mass production and suggest solutions.
1.2.2.3. Collaborate with related department to ensure smooth integration of new polymers into existing production lines.

1.2.3. Material Characterization and Testing

1.2.3.1. Perform various tests to evaluate the mechanical, thermal, electrical, and other properties of polymers.
1.2.3.2. From the test results to make a judgement the suitability of polymers for specific application.
1.2.3.3. Proceed with modification to polymer formulation based on performance needs.

1.2.4. Communication and collaboration

1.2.4.1. Document research findings and experimental procedures in clear and concise report.
1.2.4.2. Present research results to colleagues, management, or external audiences.
1.2.4.3. Collaborate effectively with related parties to achieve project goals and to resolve issues.
1.2.4.4. Support training new products/process modification for related parties.
1.2.4.5. Train basic knowledge in lab for new staff

1.2.5. Laboratory Management

1.2.5.1. Safe operation and up-keep 5S of laboratory.
1.2.5.2. Training of new lab staff.
1.2.5.3. Lab work planning and scheduling.
1.2.5.4. Equipment & spare parts management.
1.2.5.5. Maintain chemical inventory.

1.2.6. Others

1.2.6.1. Perform any other tasks assigned by the manager

1.3. Requirements:

1.3.1. Degree in chemical engineering, Polymer synthesis chemistry, or equivalent.
1.3.2. Fresh graduate - Junior Chemist
1.3.3. At least 3 years of relevant working experience – Chemist
1.3.4. Understand the hazardous of materials from SDS + Singapore regulation and judge an appropriate instruct.
1.3.5. Basic knowledge and practical experience for chemical experiments.
1.3.6. In depth knowledge of polymerization mechanism and kinetics.
1.3.7. Expertise in polymer characterization evaluation techniques.
1.3.8. Operate spectroscopy, chromatography and thermal analysis.
1.3.9. Ability to interpret and analyse data.
1.3.10. Excellent written and verbal communication skills.
1.3.11. Ability to collaborate effectively with colleagues.
1.3.12. Understanding of relevant safety regulations and best practices.
1.3.13. Project management skills.
1.3.14. Intermediate MS Office skills
1.3.15. Self-disciplined as a role model for employees.
1.3.16. Meticulous in handling complex work.
1.3.17. A resourceful problem solver.
1.3.18. A person with high degree of integrity and patient.
1.3.19. Understand the Japanese culture to support working with Japanese colleagues. (Preferred)

1.4. Others:

1.4.1. Location: Jurong Island (Company Transport provided)
1.4.2. Commence work: ASAP.
1.4.3. Applicants can work in Singapore without requiring a work pass.
1.4.4. Working Hours: Mon ~ Fri from 8:00 am - 4:45 pm

Job Description:

• Monitoring the entire production line with quality issues.
• Work with internal teams to improve the quality of the products
• Familiar with various inspection techniques and able to act as an auditor for quality system

Requirements:

• Require to travel to our malaysia's plant
• Minimum 1 year working experience in manufacturing field
• Previous work experience as a QA Engineer or any similar role
• Minimum Diploma/ Post-secondary/ Polytechnic in engineering or equivalent

• Manage and maintain security protocols, IT systems, networking infrastructures and database systems.
• Troubleshoot technology issues.
• Manage multiple projects simultaneously.
• Work with inter-disciplinary teams to craft IT solutions.
• Communicate complex information to a non-technological audience.
• Assist in researching, designing and implementing new programs.
• Identify and solve problems in existing hardware and software solutions.
• Develop, modify and maintain database.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment in order to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures
  Witness and provide contractor resources to support FAT as required.
• Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

Job Descriptions:

• Valve remote control and tank gauging system

• Hydraulic deck machinery testing/ commissioning/ service

• Installation, maintenance and upgrade these systems and related equipment , including inspection, testing and repair

• Carryout testing and inspections by company policies and procedures

• Must have relevant experience in Electrical/ Instrumentation/ Hydraulic fields

• Able to read and understand the electrical drawings and P&ID/ hydraulic circuits

• Need to work onboard the ship (shipyard, anchorage, offshore) if necessary

• Travel to overseas for service job when necessary

• Preferred background knowledges:

• Hydraulic/ Pneumatic/ Electric Actuator functions/ principles

• Hydraulic Power Units functions/ Trouble Shooting/ Service

• Electrical Motor Stater panel troubleshoot, solenoid control, instrumentation, Automation control troubleshoot

• Basic knowledge for the PLC Programming upload/ download/ Scada/ HMI

Requirements:

• Minimum Diploma/ Degree in Electrical/ Mechanical Engineer

• Minimum 3 years of relevant working especially in Marine/ Offshore/ Instrumentation & Control/ Hydraulic

• A self-starter

• Comfortable working independently and working with team members

• Innovative thinking, thinking outside-the-box, resourceful problem solver

• Excellent communication and interpersonal skills

Job Benefits

Excellent learning environment

Positive and closely knitted working environment

Working location:

15 Kwong Min Road

Singapore 628718

Shortlisted candidate will be notified

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

• Deliver sub-assemblies to production on time, cost and to specification.
• Develop detailed specifications and design requirements for interdependent systems
• Identify and design test requirements to replicate anticipated usage and optimise products to be robust and high performing.
• Build functional prototype products suitable for testing, review and demonstration
• Perform and review analysis on test failures and develop efficient solutions
• Take an active, hands-on role to ensure that all engineering problems are resolved thoroughly.

About you

• A degree in a relevant Engineering or Science discipline or equivalent
• 4+ Years of experience in a relevant role, working on complex and challenging technical problems
• A creative and considered approach to problem solving, following clear design processes
• A practical and methodical approach to design using an iterative development cycle of prototyping and testing
• Experience working in a 3D CAD design environment.
• The skills to communicate your ideas to others within your team and across a business
• A demonstrable desire to constantly improve yourself including evidence of self-development
• Knowledge and understanding of a broad range of manufacturing techniques

Dyson is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our technology so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

In this role, you will have the unique opportunity to engage in field service, site installation, and perform Quality check on all completed machines.

Job Responsibilities:

• Provide site machine installation and maintenance.

• Attend to service call.

• To conduct in-house and on-site training for customer.

• Investigate and handle customer's complaints.

• Quality check on all completed machines to ensure stringent quality compliance before delivery to customer.

Requirements:

• Diploma in Electrical or Mechatronics Engineering

• Minimum 2 years of field service or QA experience in Industrial Automation projects

• Ability to build strong relationships, work with customers to solve problems

• Good team player with excellent interpersonal and communication skills.

• Meticulous, Quality conscious and Problem solving/troubleshooting skills.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

IT Support:

• Provide technical assistance and troubleshooting for hardware and software issues on desktops, laptops, printers, and other peripherals.
• Perform routine maintenance tasks such as system updates, antivirus scans, and system optimizations to maintain compliance.
• Assist in setting up and configuring workstations, mobile devices, and audio/visual setups.
• Responsible for managing security incidents and outages for area of geographic responsibility partaking in the IRP / ERBC as directed. Due to geographic isolation, possible need to take on the local lead role.

IT Administration:

• Manage office IT to documented IT standards and process.
• Manage inventory, via asset tracking for IT equipment and software license in ITSM system.
• Manage IT tasks that pertain to employee life cycle from onboarding to user separation.
• Log and manage tickets in ITSM system, following Incident and Problem Management process where applicable.
• Work with external suppliers for IT hardware procurement and repair.

Qualifications:

• Bachelor's degree in Computer Science, Information Technology, or related field, or equivalent work experience.
• Proven at least 1.5 years of experience in providing technical support and troubleshooting for hardware, software, and network issues.
• Proficiency in operating systems such as Windows and macOS is a must.
• Proficiency in Microsoft Office Suite, including Word, Excel, PowerPoint, and Outlook.
• Knowledge of networking concepts, protocols, and troubleshooting methodologies.
• Strong verbal and written communication skills, with the ability to effectively communicate technical information to non-technical users.
• Excellent problem-solving skills and the ability to work independently or as part of a team.
• Attention to detail and ability to prioritize tasks in a fast-paced environment.

ob Description:

• Logic or creative mindset, strong initiative and passionate in mechanical concept development
• Evaluate all enquiries and requests
• Formulate proposals and quote the project
• Conduct presentations to customers
• Negotiate the technical (conceptual design) and commercial matters for the project
• Liaise with the Production Manager to ensure smooth delivery of the project
• Enthusiasm in project management

Job Requirement:

• Travelling required
• Able to communicate at all level
• Able to read technical drawing at advantage
• Good personality
• Driving license Class 3
• ME/EE/Business qualification or background
• Able to speak English and Mandarin
• Fresh graduates are welcomed to apply

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules
• Check and ensure all the temporary work is carried out as per PE design

Requirements

• Degree in Civil Engineering or equivalent
• Min 2 to 3 Years Relevant Work Experience (C&S RC / building work)
• Proficient in English writing and speaking
• Microsoft application (words, excel, ppt etc)

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

Key Responsibilities:

• Design and develop electrical systems, components, and wiring diagrams.
• Design and oversee the electronics hardware design activities of the whole product.
• Select electrical/electronics components for new product development, and replacement for existing products as well.
• Conduct electrical testing and troubleshoot systems to ensure functionality.
• Collaborate with cross-functional teams (e.g., mechanical) on product development.
• Liaise with supplier and operation for design improvement.
• Provide technical support of products introduced into both the domestic and international markets.
• Work closely with a multidisciplinary team to drive cost optimization, manufacturability, quality and reliability.
• Provide technical support during installation, commissioning, and maintenance of systems.

Requirements:

• Bachelor’s degree in electrical engineering or related field.
• Proficient in electrical design software tools
• Strong knowledge of electrical systems, power distribution, control systems, and circuit design.
• Strong problem-solving skills and attention to detail.
• Hands-on experience with hardware testing, troubleshooting, and equipment commissioning.
• Experience in microcontroller platform hardware design is a plus
• Knowledge of HVAC systems is a plus.

The person will be responsible for

1) Prepare & compile Monthly Progress Claim for all the projects;

2) Prepare & submit Variation Order for all projects where applicable;

3) Quantity Take-off;

4) Assist in monitoring & compilation of all ISO 9001, ISO14001 & ISO45001 documentation for Audit & BCA Accreditation;

5) Any others relevant task that maybe assign from time to time

Qualifications : Diploma in related field;

Experience : Fresh or 2 years relevant experience will be added advantage;

JOB RESPONSIBILITIES:

• Research on concepts to innovate and improve existing/new products
• Plan, design and develop products within quality target and cost
• Consolidate design input and develop schedule of conceptual design for Manager’s approval
• Participate in Innovate Project Team Projects - Execute basic R&D projects and focus on main research area: Bike System

JOB REQUIREMENTS:

• Degree in Mechanical Engineering / Mechatronics
• Proficient in CAD / CAE, Finite Element Analysis using NX
• Highly innovative and creative
• Must know how to cycle
• Able to perform overtime
• Open to overseas training / secondment

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

• Lead the team in executing electrical work during the construction phase, including cable tray installation, cable pulling, panel installation, cable termination, and testing/commissioning for MV/LV switchgear, transformers, UPS, DCIS/HMI, etc.
• Monitor and inspect construction activities to ensure compliance with design documents.
• Manage a team comprising supervisors, sub-contractors, and vendors.
• Responsible for electrical interfaces with the operational team, conducting meetings, and providing technical clarifications.
• Investigate and troubleshoot electrical switchgear faults or failures, implementing effective corrective and preventive actions.
• Analyze and enhance equipment reliability to prevent recurrence, collaborating with operation groups and external contractors.
• Prepare documentation for maintenance work, ensuring compliance with safety standards, and utilizing appropriate Method Statements and Risk Assessments, meeting BCA requirements.
• Collaborate cross-functionally to ensure systems, equipment, and rooms align with internal customers' needs.
• Review inspection and testing plans for electrical and instrument system installations through relevant checklists.
• Coordinate with stakeholders to ensure the smooth completion of projects.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred