Electrical and Electronics Engineer

Roles & Responsibilities

Job Description

· Be responsible for designing new product developments and sustaining matured products in the semiconductor automation equipment industry.

· To design and layout system-level electro-mechanical modules and interconnects.

· Maintain development and engineering documents and provide technical support to production and field.

· Ensure world-class quality and competitive cost.

· Committed to meet or exceed customer requirements and schedule.

Requirements

· Diploma / Degree in electrical and electronic engineering, mechatronics, or electro-mechanical engineering. ITE with more than 10 years’ experience will be considered.

· At least 1 year of relevant experience

· Strong fundamentals in actuators, servo motors, sensors, power supplies, cabling, and electro-mechanical engineering.

· Experience in safety consideration, good grounding practice, understanding and elimination of electrical noise, EMI/EMC compliance, and international standards requirements like CE, SEMI, IE, etc

· Knowledge of CAE/CAD such as PADS, AutoCAD, SolidEdge, MATLAB, etc.

· Familiar with measurement equipment such as oscilloscope, current probe, position sensor, accelerometer, etc.

Responsibilities:

• Prepare Product / Architectural / Mechanical drawings with AutoCAD / Solidworks.
• Work within stated procedures to ensure that design records/controls are maintained.
• Provide product technical support to customers / suppliers.
• Ensure Supplier’s Quality meet our Quality Standard.
• To Initiate / propose / participate in Quality Improvement.
• Take part in new product development.
• Other ad-hoc job assigned by the supervisor.

Requirements:

• Min Degree in Mechanical/Engineering or equivalent.
• Good understanding of Precision machining processes.
• Well versed with manufacturing process & good understanding of material specifications common to Ironmongery industry.
• Minimum 3 to 4 years experience in mechanical field or Ironmongery industry.
• Required language(s): English, Mandarin (to liaise with 90% Mandarin speaking customers - majority, and suppliers in regard to technical support).
• Well verse in Solidworks & AutoCAD Software.
• Responsible, mature, independent with a positive attitude and willingness to learn.

Additional Information

• Office Location: 141 Woodlands Industrial Park E 5, Woodland E-Terrace Singapore 757507.
• Working Hours: Mondays to Fridays (8:30am to 5:30pm), Alternative Saturdays (8:30am to 1:30pm)

For immediate consideration, please indicate the following information in your resume:

(a) Current and expected salary

(b) Earliest available date to commence work

Please note that qualified applicants who are immediately available will be given priority, and we regret that only shortlisted applicants will be notified.

Summary:

The incumbent will collaborates closely with the indoor sales team to source, prepare quotations, and liaise with the Customer Service team to fulfill orders. The executive is expected to be conscientious and able to work under pressure in order to coordinate between the sales team, the vendors/suppliers, forwarders, the customer service team, and the customers. He/She is expected to be proficient in English as well as basic computer software such as Excel and Outlook. Experience with Business Central is a plus.

Possible coverage areas include North Asia (China, Taiwan, Korea, and Japan), Southeast Asia (Cambodia, Myanmar, Laos, Thailand, the Philippines) and Singapore. For regional roles, business travel of up to 50% per month is expected. Experience including, but not limited to, local language fluency, past stints, and existing aerospace networks in these countries are a big plus.

Candidates are also expected to have previous experience trading aerospace consumables such as tapes, chemicals, tooling, and raw materials. Experience with rotable programs is also welcomed.

Job Responsibilities:

· Further develop current accounts and hunt for new accounts in assigned territories. These include airlines, MRO shops, 3P repair shops, and air forces.

· Closely partner with the indoor sales team (when available) to source, prepare quotations, and coordinate with the customer service team to fulfill orders. Functions include, but are not limited to -

a. Source and expand existing vendor pool;

b. Negotiate with vendors for best pricing and lead time;

c. Prepare quotations for the customers;

d. Process purchase orders from the customers by coordinating with the Customer Service team by way of systematically sending out the relevant quotation from the vendor and purchase order from the customer;

e. Track and monitor outstanding sales orders.

· Support sales analysis.

· Any other duties as assigned by the supervisor.

Requirements

1. Minimum 3 years of experience in Aerospace industry.

2. At least 2 to 5 years of experience in general admin or sales support.

3. Strong interpersonal, effective written, and verbal communication skills in English.

4. Good working knowledge of Microsoft Office.

5. Team player with good interpersonal skills.

6. High integrity, reliability, and honesty.

7. Independent and able to work in a fast-paced, goal-oriented, and time-sensitive global environment

Job Description & Requirements

Responsibilities:

• Assembly, fitting, basic tool room machining, mould development, implementing process improvements for tool manufacturing and liaise with machining technician for process planning and scheduling of project.
• Discuss tooling drawing with Designer to ensure tooling design is meeting customer product requirement.
• Assemble, fitting and troubleshooting of tooling related issue.
• Fabricate tooling components and inserts according to tooling drawing.
• Liaise with Production Engineer for execution/planning on mould testing.
• Ensure tool manufacturing and trial meeting planned schedule.
• Initiate corrective action if first article or parts not meeting specification.
• Use various measuring devices including micrometers, calipers, optical measuring machine, gauges and all inspection equipment
• Ensure tool room facilities and equipment are properly maintained and used.
• Ensure tool room health and safety precautions are taken care at all times.
• Participate in Continuous Improvement Project.
• Any other ad hoc jobs assigned by Manager / Supervisor

Requirements:

• Minimum 5 year experience in mould manufacturing toolroom environment.
• ITE or Nitec certificate in Tool & Die Trade.

Responsibilities:

• Customises CMS database checksheets and allocation of checksheets based on latest engineering drawing revisions and punchlist updates for mechanical/ process/safety /HVAC discipline
• Prepares boundary drawings as per subsystem listing
• Prepares procedures/ work method statements and risk assessment for mechanical/ process/ safety/ HVAC commissioning activities
• Attends Factory Acceptance Test at vendors' premises, as required
• Leads a team of mechanical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides
• Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability
• Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities
• Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner
• Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities, etc
• Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc
• Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures
• Reviews completed commissioning documentation such as checksheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.
• Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

Requirements:

• Min. 5 years years of commissioning experience in the Oil & Gas/ Wind Farm industty
• Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc
• Good knowledge and experience in commissioning activities of oil and gas/ wind farm facilities
• Familiar with permit-to-work systems and lock-out tag-out procedures
• Good analytical, problem solving and planning skills.
• Familiar with Project Specifications, Technical and HSE Standards
• Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.
• Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Amiralty Yard)

60 Admiralty Road West, Singapore 759947

(Tuas Yard)

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description & Requirements

Responsibilities:

-Responsible for technical drawings for electrical designs

-Develop PLC Program and HMI Graphics for projects

-Conduct Testing & Commissioning and Site Acceptance

-Execute 1 or more Automation Projects concurrently

Requirements:

-Diploma/Bachelor Degree in Electrical/Mechatronics

-Knowledge in PLC (Omron NJ) / C++ / C# / ACAD / Microsoft Office

-Preferably with Automation experience

Roles & Resonsibilities

1. Attending site meetings.

2. To co-ordinate and correspond with suppliers and consultants.

3. Supervision and quality checking.

4. Manage and ensure workers in compliance.

5. Send workers to/from project site/office/dorm daily basis.

6. Arrange Materials and Manpower of Projects.

Requirements:

1. Mininum Degree in Civil Engineering or related education diploma

2. Certificate in Managing Work at Height Course (MWAH) and Certificate in Assess Confined Space for Safe Entry and work is a plus.

3. Mininum 9 year related working experience in Singapore is a must.

4. Class 3 driving license.

5. Good interpersonal, analytical and high level of problem-solving skill

6. Able to work independently.

7. PC Skill

8. Long Working Hour, night shift might be required

Job Requirements:

Education:

• Bachelor’s degree in Civil Engineering, Construction Management, or related field.

Experience:

• Minimum 3–5 years of relevant experience in construction project management in Singapore.
• Hands-on experience with local construction projects and regulatory requirements.

Skills:

• Proficiency in project management tools (e.g., MS Project, Primavera) and CAD software.
• Strong understanding of construction methods, materials, and local building regulations.
• Excellent leadership, problem-solving, and time-management abilities.
• Effective communication skills to liaise with stakeholders at all levels.

Key Responsibilities:

• Plan and execute construction projects, including budgeting, scheduling, and resource management.
• Collaborate with architects, contractors, and consultants to ensure project alignment with design specifications.
• Supervise on-site activities to ensure adherence to safety, quality, and compliance standards.
• Resolve technical and operational challenges during project execution.
• Prepare and present progress reports to stakeholders.
• Ensure compliance with Singapore's building codes, safety regulations, and environmental standards.

Responsible for creating, improving, and protecting our immediate environment. They plan and oversee construction and rebuilding, as well as the maintenance of roads, bridges, tunnels, railways, dams, harbors, power plants, and airports.Managing, designing, developing, creating and maintaining construction projects,Conducting on-site investigations and analyzing data,Assessing potential risks, materials and costs.

Job Responsibilities:

• Able to plan/coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at the site and recommend solutions to relevant teams/departments.
• Review Architectural drawings for conflicts with Structural/M&E and liaise with consultants to resolve issues.
• Ensure all work is carried out within the schedule and maintain the required quality.
• Ensure a safe work environment at the work site and manage workers.
• Assist the Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submitting and monitoring technical drawings, method of statements, and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.

Job Requirements:

• Possess a Degree / Diploma in Civil Engineering / Structural / Architecture and related discipline.
• Experience in LTA-MRT project will be advantageous
• Proficient in Microsoft Office/Projects, Autodesk AutoCAD/Revit.
• Ability to keep a positive attitude in a fast-paced environment.
• Good attitude, good communication skills, and good team .

Job Description:

• Support Sales Manager to develop comprehensive BMS estimation which include preparation of tender submission and marketing materials during tender and follow up stage.
• Understand technical drawings and specification requirements.
• Establish good relationship with vendors and negotiate with them.
• All other ad hoc duties as assigned.

Requirements:

• At least Higher Nitec/ Diploma in Engineering Discipline
• Preferably some technical knowledge of BMS System
• Good communication skills and able to speak English well
• Well versed with Microsoft Office including Excel, Words, Powerpoint
• Team player
• Able to prioritizes, organized and multitasking
• Fresh graduates are welcome to apply. Training will be provided.

Job Responsibilities

• Lead the development, standardization, benchmarking and continuous improvement of operation/equipment metrics, business processes and BKMs for the FE ME network.
• Govern the ground rules for FE ME operation and Fab fields.
• Proactively uncover opportunities for improvement by deep-diving into the root cause of WS or Equipment MA/Lost/Standby nonperformance, partner with Site/MAE/CPEE teams drive recovery and improvement.
• Anticipate potential obstacles in constraint workstation management and develop strategies with the site ME Managers to improve WPD.
• Partner with network SIC, Equipment and Process team to improve and support BIC (Best In Class) Gb Output, Constraint Workstation utilization, as well as NPI (New Product Introduction) Cycle Time and Inventory Management.
• Be an Area technical global SME to optimize area operations, systems integration and to drive global standardization across all sites.
• Govern MAS change process with WW alignment and implementation of scheduling enhancements and drive continuous improvement in scheduling solutions.
• Identify challenges in operations and conduct Powerwalk to discover opportunities for improving efficiency through digital transformation.
• Lead proof-of-concepts and facilitate deployment of BKM reports and automation to improve fab/area efficiency and productivity.
• Participate in the WW ME forums, facilitate area network meetings and sustain/audit existing BKMs and business processes in the network.
• Cultivate an environment of motivation to encourage engagement from distributed team members, enabling them to reach their fullest potential.

Requirements

• Bachelors/Masters Degree in Engineering or related field of study or equivalent experience
• Intermediate knowledge of the 300mm semiconductor manufacturing process is preferred.
• Confirmed experience in Manufacturing Engineering.
• Proficient in the fundamental principles of Lean Manufacturing, Equipment Efficiency, and Line Management.
• Thorough knowledge of Micron’s MES, Scheduling System, Line Management systems and related production and planning reporting tools.
• Knowledge in SQL, Tableau, Python capability to enable automation will be an advantage.
• Lean Six Sigma Certified or Lean Manufacturing Certified will be an advantage.
• Show initiative and determination to identify the right collaborators and overcome obstacles to achieve objectives for various projects.
• Show success in applying their knowledge of area processes and equipment to solve problems and implement comprehensive solutions for all Micron sites.
• Proven track record of effective global collaboration, demonstrate good cultural awareness and agility to effectively drive alignment and use digital tools to establish rapport remotely across various countries.

We have an exciting position in the explosive growth area of Data Center Enterprise Storage. In this role you will be responsible for
developing the most advanced semiconductor devices to support stringent high capacity storage needs across all the top tier service
providers. Our IC R&D team is looking for an experienced physical design engineer to develop high speed custom analog/mixed signal
products for the storage industry. A qualified applicant would work closely with circuit design engineers to lay out high-speed custom analog
designs and develop mask layouts for customer products, as well as printed circuit board designs. You will join a cross-functional team
responsible for developing leading edge high-speed custom IC products that ultimately achieve high volume production.

Job Responsibilities
- Lay out high speed, high performance analog/mixed-signal custom integrated circuits
- Work directly with a team of engineers to determine floor plan, routing and I/O requirements
- Perform IC design rule and connectivity verification and drive products through mask release flows.
- Contribute to methodology improvements to increase layout and verification efficiency.
- Create reticle layouts, documentation, and PO’s to release products for mask build.
- Complete PCB layouts for test hardware.

Requirements/Qualifications should be:
- Bachelor's degree in Electrical Engineering (or related field)
- 5 years experience in custom analog IC physical design
- Experience with schematic-driven layout, floor planning, chip level routing, design for manufacturing and design rule and connectivity
verification is preferred
- Experience using Cadence Virtuoso XL preferred
- Experience with Cadence Allegro for PCB layout preferred
- Familiarity with both analog and digital layout tools and flows, circuit design concepts and IC manufacturing processes desired
- Strong communication skills
- Understanding of silicon process technologies (CMOS and Bipolar) and device physics would be a plus.
- Proven analytical skills (application of math and physics to solve problems)
- Must be meticulous and demonstrate attention to detail.

• Create ATE (Advantest SmarTest PS1600 & EXA Scale) test program and integrate various test functions in test flow to support First Silicon bring up for wafer and package in NPI phase.
• Perform design validation/characterization/experiment on ATE across process, voltage, frequency and temperature. Evaluate test and product margins, debug and communicate result/yield/analysis to various teams.
• Utilize ATE test tools and other test instrument to debug and analyze the test, design and product issue.
• Support ATE test hardware design (Including build instruction, SI/PI...etc.) and debug.
• Support test time reduction.
• Support proto demands/qualification for IP owner and customer requests.
• Complete test development, test program transfer and product release at respective milestones.
• Initiate, plan and execute multiple projects to achieve target.
• Good knowledge of product engineering, failure analysis and manufacturing test process.
• Interest in learning, researching, sharing and implementing new technology and test methodology.
• Good written/Oral communication skills.
• Result orientated and team work.

As a Micron Singapore Construction Electrical Engineer, you will play a key role in the design, installation, and commissioning of electrical systems in semiconductor manufacturing facilities. This role requires strong technical expertise, project management skills, and the ability to collaborate effectively with cross-functional teams to deliver projects on time and within budget.

Electrical Distribution

Key Responsibilities:

Electrical System Design & Engineering:
- Develop and review detailed electrical designs, including schematics, wiring diagrams, and system layouts, ensuring they meet the specific needs for manufacturing, cleanrooms and process areas.
- Perform load calculations, short circuit analysis, and system capacity planning to ensure electrical infrastructure is robust and reliable.
- Work with the general contractor to specify and select electrical equipment, such as switchgear, transformers, distribution panels, and backup power systems, ensuring compliance with industry standards.
- Collaborate with other engineering disciplines (mechanical, structural, etc.) to ensure the electrical design is integrated with other building systems.

Construction Support & Installation Oversight:
- Provide technical guidance to construction teams during the installation of electrical systems, ensuring adherence to design specifications, safety standards, and project timelines.
- Review and approve electrical submittals, shop drawings, and contractor work plans.
- Conduct regular site inspections to monitor progress, troubleshoot issues, and verify that electrical work is performed in compliance with codes and regulations.
- Work with the general contractor to manage and coordinate with subcontractors and suppliers for the procurement, delivery, and installation of electrical components.

Testing, Commissioning, & Handover:
- Oversee and participate in the testing and commissioning of electrical systems, including power distribution, lighting, emergency power, and control systems.
- Work with the general contractor and/or sub contractors to perform or oversee functional testing, troubleshooting, and adjustments to ensure systems operate according to design and client requirements.
- Review documentation for system handover, including as-built drawings, test reports, and operating manuals.
- Lead or support the transition to facilities operations, providing technical expertise during the ramp-up phase and ongoing support as needed.

Compliance, Safety, & Continuous Improvement:
- Ensure all electrical installations comply with relevant codes (e.g., NEC, IEEE), safety standards (NFPA, OSHA, MOM), and environmental regulations.
- Implement best practices for energy efficiency, sustainability, and electrical safety within semiconductor environments.
- Stay updated with the latest advancements in electrical engineering and semiconductor manufacturing technologies, recommending improvements or innovative solutions for future projects.
- Participate in post-project reviews and implement lessons learned to improve electrical designs and processes in subsequent projects.


Qualifications:

Education: Bachelor’s degree in Electrical Engineering or related field.
Experience: Minimum 5 years of experience in electrical engineering, preferably within the semiconductor or high-tech manufacturing sector.
Skills: Proficiency in electrical design software (AutoCAD, Revit, ETAP), strong knowledge of electrical codes and standards, excellent problem-solving and communication skills.

Working Conditions:
This position requires working in both office environments and active construction sites, with occasional travel to project locations.

Working Location :

F10N

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

As a Global FE Central Planning Capital Engineer in Micron, you are part of the Global FE team responsible for managing the capital budgeting, funding and savings process.

In this role, you will work closely with Manufacturing Central Team resources, Fab resources, Global Procurement and Finance. You need to have good communication and presentation skills, and able to provide clear and qualitative data analysis to facilitate decision making. You should possess detailed understanding on capital expenditures and able to identify opportunities for capital optimization.

Capital System Project

• Contribute and provide subject matter expert guidance and requirement feedback in Capital Asset Lifecycle Management (CALM) project – to set up the end-to-end CALM system in SAP replacing MICAP for budget and fund.
  
• Communicate status of tasks, report issues, risks, changes, and quality concerns to the project manager and team.
  
• Establish reports to monitor Capital Health.
  
• Discuss and propose metrics and the action plans required.
  

Monthly Capital and Cash Flow Review Process

• Facilitate the monthly capital review process for Micron’s Front End (FE) Operations. Define, sustain, and continually improve the processes to enable the budgeting, funding, savings and GR/cash flow compliance of Micron’s FE Operations.
  
• Provide support and technical expertise to the various stakeholders to deliver an effective capital request to the executive teams for approval.
  
• Collaborate with site planning and other Teams to ensure used assets are considered before the commitment of any new capital expenditures, and identify opportunities for capital optimization.
  
• Balance the need to push for optimized capital plans against the monthly capital cycle deadlines.
  
• Act as a liaison between the sites and other Central groups, to establish and enforce business processes for a sustained and effective capital cycle, and help resolve conflicts as and when required.
  

Executive Capital Review

• Generate Biweekly and Monthly Capital cash flow update to leadership based on MOR, Loading scenarios, Cashflow adjustments and Projects activities.
  
• Validate Micron Capital Ledger and work closely with Finance team and other organizations/team to roll up Board of Directors reporting and Earnings Call data.
  
• Generate Wafer Fab Equipment (WFE) data based on validated Finance cash flow reports for Industrial benchmarking analysis
  

Requirements :

• Masters/Bachelors’ Degree in Engineering.
  
• Strong verbal communication and presentation skills
  
• Ability to work closely and effectively with others in a team environment
  
• Strong data validation skills and reporting skills
  
• Strong ability to perform data analysis and problem solving
  
• Ability to map relevant conclusions to support decisions making
  
• Exceptional customer focus
  
• Knowledge and practical application of statistics, data analysis and problem solving
  
• Independence and high determination to complete tasks in a timely manner
  

As the Global Facilities Regional Engineering Electrical Engineer you will be responsible for providing technical support, expertise, and lead business process alignment on construction project design, management, schedule, cost control, testing & commissioning, operational and maintenance programs for the facility Electrical systems at all manufacturing sites in your location / region.

As a global team member residing in your current site/geography, you will represent all facility design standard alignment, construction project management, O&M BKM alignment initiatives. You will also support the Global Facilities Central Engineering Team, Construction Team , Line Planning Team and O&M Team in providing critical design standard alignment, supplier quality improvement, operational and maintenance input and support construction projects.

Critical metrics include construction project management, schedule, cost control, safety index, and facilities system reliability improvement program in eliminating production events that minimize lost moves and scrap.

Responsibilities and tasks:

• Project
• Design and construction of regional green field project with alignment to global standards and collaboration with central sustainability, cost, construction and line planning team.
• Engineering support for site projects, Alpha to Beta technology transfer and sustainability projects
• Review and approve site capacity expansion and sustainability capex
• Review priority and make business driven decision on Facilities Reliability Improvement project capex
• Reliability
• Engineering support for site system improvement projects (System Reliability Improvements, Quality Improvement and Equipment EOL replacements)
• Oversee regional efforts and identify opportunities to align strategic program (eg BCP, Critical spec, Quality Defense line)
• Engineering support for major SIPP review
• Regional events lesson learnt sharing and influence of global standards development
• Communication
• Single point of contact for regional sites and GFC central teams
• Provide alignment on metrics reporting
• Engineering, O&M and Others
• Expert understanding of each sites Electrical systems operational and maintenance capabilities in order to provide critical support
• In addition to your global Electrical engineering role you will also provide site/regional support for global facility initiatives at your location/region
• Technically lead a global cross functional team focused on project, design, construction, operational excellence with the site Electrical systems engineers
• Provide support to all sites including on site presence for construction project and critical Electrical failures of
• Actively involved in TPM implementation and alignment along with ongoing support for Electrical systems
• Drive improvement in the quality of our utilities through variation reduction (SPC).
• Drive the alignment for common methodologies including SPC, conformance, SIPP’s, MOC and 8D problem solving throughout the network for Electrical systems
• Identify and deploy cost reduction efforts while optimizing and reducing energy usage for Electrical systems throughout the network
• Assess and insure effective and consistent PM and predictive maintenance programs, procedures and checklists across the network
• Regular communication with the site engineering and O&M teams on status and performance
• Analyze and benchmark equipment performance.
• Identify and develop training and certification programs that support global and site efforts
• Develop appropriate metrics to drive improvement (On time PM’s, MTTF, MTTR etc.)
• Send out regular updates with key items of focus and initiatives.
• You will review FIPA/METS events and provide recommendations to drive the reduction of critical Electrical impact events.
• Collaborate with the construction / engineering team to insure alignment on projects
• Support the network effort to implement, monitor and drive continuous improvement for success of Micron’s Sustainability programs in alignment with the long-term Sustainability strategy
• Benchmark system performance and drive Best-In-Class approach (BICs) across network
• In depth review of site sustainability projects and sustainability data monitoring to support site’s and company’s sustainability targets.
• Provide technical advice and support to overcome challenges and roadblocks in project planning & execution
• Support sustainability projects achievement data acquisition and validation in central tracking depository.
• Conduct, Analyze and create improvement actions based on electrical systems studies using design software tools such as SKM or ETAP.

Education Required

• Bachelor’s Degree or equivalent experience in Electrical Engineering or any related field of study

Experience Required

• 10+ years of Facility Engineering experience and preferred with Semiconductor Industry experience.

Experience Desired

• Lead or actively involved in global facility engineering efforts

As a Micron Singapore Construction ELV Engineer, for the design, installation, and commissioning of ELV systems in semiconductor manufacturing facilities. This role involves ensuring that the critical systems for communication, security, and control are properly integrated and functional to meet project requirements.

Extra Low Voltage Systems

Design & Engineering of ELV Systems:
- Design and develop ELV systems such as Life Safety System (LSS), fire alarms, CCTV, access control, public address systems, structured cabling, and building management systems (BMS).
- Perform detailed ELV system layout, cabling schedules, and interface drawings to ensure smooth integration with electrical and mechanical systems.
- Select and specify appropriate ELV components and devices, ensuring they meet project specifications and comply with local and international standards.
- Collaborate with other engineers (electrical, mechanical, etc.) to coordinate ELV designs with other building services.

Project Execution & Installation Oversight:
- Supervise and provide technical support during the installation of ELV systems, ensuring work is performed according to approved designs and specifications.
- Coordinate with contractors and subcontractors for the proper installation of cabling, devices, and control systems.
- Review shop drawings, submittals, and material selections from contractors to ensure compliance with project requirements.
- Conduct regular site inspections to monitor ELV installation progress, identify any issues, and ensure adherence to safety standards.

Testing, Commissioning, & Integration:
- Oversee and conduct system testing and commissioning of all ELV systems to verify they function as per design specifications and operational requirements.
- Ensure seamless integration of ELV systems with other building systems, such as HVAC, lighting controls, and security systems.
- Troubleshoot and resolve any technical issues during the testing and commissioning phases.
- Review as-built documentation, operation manuals, and test reports for handover to the client or facility operations team.

Compliance, Safety, & Continuous Improvement:
- Ensure all ELV installations comply with relevant codes and standards (e.g., NFPA, BICSI, TIA/EIA) and that safety protocols are strictly followed.
- Implement energy-efficient and scalable solutions for ELV systems, considering the evolving needs of semiconductor manufacturing facilities.
- Stay updated on advancements in ELV technologies, recommending system upgrades or improvements where applicable.
- Participate in post-project evaluations to gather lessons learned and apply best practices to future projects.

Qualifications:

Education: Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field.
Experience: Minimum 5 years of experience in ELV systems design and installation, preferably within semiconductor or high-tech construction environments.
Certifications: Profinet certification is required,
Skills: Strong knowledge of ELV systems, proficient in AutoCAD, Revit, or similar design tools; excellent problem-solving and communication skills.

Working Conditions:
This position involves working in both office settings and on active construction sites, with the potential for travel to project locations.

Working Location :

F10N

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever!

We need someone who is passionate about detecting problems, making changes for the better, and seek out innovative ways in how predict device performance! We are an equal opportunity company who values of People, Innovation, Customer Focus, Tenacity and Collaboration.

As Yield Failure Analysis Engineer in Micron NAND Technology Integration (NTI) Singapore department, you will be responsible for providing yield analysis for next-generation Micron products. In this exciting role, you will become a domain expert on physical failure analysis methods for any given electrical failure! You will also participate in the identification and communication of yield issues, assist with the root cause analysis for process deviations, characterize, probe, parametric, and fabrication data to identify the sources of failures.

Your responsibilities will include, but are not limited to, the following:

Perform Failure analysis which includes conducting electrical characterization, perform electrical verification to confirm failures, and understanding PFA techniques available for de-processing failures

Drive failure analysis initiatives for the yield enhancement team. Create and deliver new methodologies, capabilities, and innovative ways for failure analysis de-processing failures

Participate in global meetings and present results to Product Development and Process Integrations teams

Collaborate with metrology and RDA team to re-define and validate inline detection capability

Assist and support the transfer documentation of layout/architecture fundamentals of new technology from R&D to manufacturing fab.

Understand and follow all health, safety, and environmental procedures and requirements.

Successful candidates for this position will have:

• Experience in the semiconductor industry in the areas of Process Integration, Yield Enhancement, Failure Analysis, Data Science, or Unit Process.
• In-depth knowledge and direct experience with nonvolatile memories
• Minimum 4 years of related work experience in yield analysis
• Good understanding of the process flow, and interaction of process and device.
• Poses theoretical and/or operational knowledge of scanning electron microscopes (SEM), focused ion beam (FIB), Transmission emission microscopes (TEM), and Elemental Analysis (EDS, EELS).
• Fluency in Python, JavaScript, C or C++ is Windows, Linux, JMP statistic software is desirable.
• Ability to be self-motivated and self-governing with confirmed ability to work in a demanding and dynamic environment.
• Solid analysis, communication and reporting abilities with demonstrated presentation abilities.

Education:

B.S., M.S., or Ph.D. in Electrical Engineering, Microelectronics, Materials Science, Chemical Engineering, Physics, or a related field. We also consider applicants with equivalent experience.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally.
• Strict adherence to Micron Intellectual Property protection policy is a must.

Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry are welcomed to apply.
• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport
• 2-3 years of experience in Semiconductor Equipment/Process development is preferable
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE) Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 2-4 months at a stretch to work on technology development.

Job Summary

· To develop Motion Control Solutions and algorithm for precision stages and robotic applications

· To develop R&D product development integration with motion control solutions

· Evaluation of R&D product performance

Job Responsibilities

1. Development of Motion Control with complex motion profile requirement for jerk reduction, vibration control

and force control

2. Development of R&D products in accordance to motion control solutions

3. Technical review of motion control products, including controllers, drivers, encoders and any peripherals

4. Provide technical support for product range including motion controllers, PLC, HMI, motor drives, DDT motors

and actuators, encoders and robotic arms.

5. Diverse a vibration monitoring system for predictive maintenance investigation

People Requirements

1. PhD/Degree / Diploma in any Mechatronics, Electrical, Electronic, Control or relevant Engineering discipline

2. Familiar and knowledgeable in Closed-loop Control systems and precision engineering

3. Knowledgeable in control systems principles and electrical fundamentals

4. Programing in C#

5. Self-motivated and good communication skills

Job Responsibilities:
- Maintains the Company Integrated Management System, ensuring all business processes are documented, have a designated owner and a plan for their maintenance, aligned to Survitec strategy and associated accreditation and/or regulatory frameworks.

- Perform internal audit procedure and schedule as per Department audit plans, to include the audit Scope, Objective and Criteria. Deliver the audit report including findings; agree on corrective actions with auditees and refer findings to the Manager.

- Investigate non-conformances using current and appropriate methods, systems, and procedures, taking action to solve immediate compliance issues.

- Identifies shortcomings in quality processes or outputs, identifies root cause and works with internal stakeholder to adjust processes or working practices to remove or mitigate any production quality issues; uses established change management programs to address issues and deliver sustained improvements.

- Attend aviation related training and create/refresh and update on internal company aviation training notes.
Conduct internal company training as per aviation requirements.

- Implements systems to ensure compliance with QHSE policies, group and Customer requirements; ensures audit, inspection and risk management are adhered to and embedded throughout the system.

- Document control system management, revision and updating.

- Defines and communicates the processes and schedule for audit, working with colleagues from the Quality function to ensure all supplier, operational, technical, health, safety and environmental audit activity is carried out as planned.

- Leads and participates in quality, non-conformance and customer complaint investigations.

- Provides written reports on audit and investigation findings, implements and monitors CAPA and improvement actions. Ensures findings are reported and escalated appropriately.

- Works with Survitec QHSE colleagues to develop tools and dashboards for the statistical analyses on which recommendations for improvement are based. Ensures outputs from QHSE reporting tools and dashboards are communicated to and understood by the business.

- Inform manager of audit findings and compliance issues, including capability gaps, workflow issues or matters requiring quality development or improvement.

- Any others tasks/projects as assigned by line manager from time to time.


Job Requirements:
- Degree/Diploma in Engineering (preferably Quality Engineering).

- At least 2 years of Quality Assurance experience in Aviation industry.

- Knowledge of ISO 9001, ISO 14001, and TS 16949.

- Proficiency in statistical tools and Microsoft Office.

- Strong analytical, problem-solving, and communication skills
Certified Internal/Lead Auditor (preferred).

- Train the trainer qualification will have added advantage.

Responsibilities:

• Define Product Architecture, Conceptualize and Prototype new designs based on specifications
• Participate in Design and Development of baseband analog/logic/digital circuit for wireless audio products.
• Perform circuit integration, schematic generation and circuit/system levels testing and optimization.
• Ensure design processes and documentation meets company requirements
• Work with a team of engineers and/or designers through different phases of the product development.
• Willing to travel overseas to support prototype builds and customers reviews

Requirement:

• Degree in Electrical/Electronics/Communication Engineering.
• Min 3 years experience in baseband design and Development
• Hands-on experience in design and test of Baseband/Audio/Power management is required.
• Knowledge of baseband system integration for audio, power, battery, memory and processor components are desired.
• Experience in audio/wireless hardware system design is an advantage.
• Analytical, independent, highly energized, good interpersonal skills, excellent communication skills and good leadership qualities.
• Excellent teamwork skills, flexibility, and ability to handle multiple tasks.

The above information on this description has been designed to indicate the general nature, and level, of the work performed by this position. It is not designed to contain, or be interpreted, as a comprehensive inventory of all duties, responsibilities and qualifications required.

Interested candidates may also apply or write in to CS Chua, EA 12C6130/ R1548619 [email protected]. Shortlisted candidates will be contacted for a discussion.

The intern will work in the Production department of Keystone Cable factory. He will report to the Plant Manager (mentor) and work alongside engineers / technicians to identify opportunities for factory operations efficiency and productivity improvement.

Expected tasks / responsibilities

1. Job shadow / On-job training, OJT of Production Engineer to understand cable manufacturing process.
2. Problem understanding of current methods of manual production data collection with the intent of improving the process flow and to digitize where possible.
3. Data acquisition of shop floor data to set baseline targets for production improvement
4. Research and testing of hypothesis on production parameters we want to improve
5. Project management of one or two projects to improve factory productivity / efficiency using existing or acquired skillsets.

Learning outcomes and objectives

1. To allow intern to gain a good understanding of the work and responsibilities of a production engineer in a factory.
2. To project manage one or two projects that tackle factory productivity and efficiency problem statements.
3. To apply and extend intern’s skillsets on shop floor data collection and analysis with the objective of improving existing factory systems.
4. To allow company and intern to assess compatibility for potential collaboration opportunities in the future.

Requirements

Personal traits requirements: Respect for individual, Team player, Good communication skills, Willing to accept new challenges and learn.

Technical requirements: Industrial control and automation, Power systems, PLC systems, Basic programming skills will be a plus: Python, SQL database, MS Office proficiency

*Kindly indicate the period you are able to commit to the internship in resume

*Only available for internship period beyond August

· Responsible for all conceptual design, mechanical design, cost control, fabrication parts and BOM generation of automated equipment.

· Support RFQ proposal, documentation for manual, ECN, work instruction, specification and test plan.

· Responsible for project co-ordinating and project timeline control

· Good knowledge of using solid works 3D cad software a must.

· Knowledge in motor, pneumatic component, sensors and LM parts selection.

· Minimum 2 year of working experience

· At least a Diploma or ITE in Mechanical/Mechantronic