• Serving as the first point of contact for Client end users seeking technical assistance over phone, email, MS team and ticketing system and updating all cases reported into the Client ticketing system.
• To configure, install, support, and maintain IT hardware and software – PCs, laptops, and mobile devices, printer/copiers. Windows operating systems, applications software.
• To support Meeting Room Tablet, Projector, Telephone, Cabling and Audio Video (AV) System.
• Record events and problems and resolutions in Client ticketing system.
• Coordinate with Client IT Department to plan and implement software upgrade and OS installation or hardware tech refresh on PCs, laptop, and mobile devices.
• Day to day management of the helpdesk – dealing with cases from inception to competition
• Required to monitor and update Client IT Asset Management System
• Required to attend Client end-users within Client premises.
• Client IT Environment require support is inclusive of: -
  • Install and troubleshoot Windows & No Windows Applications
  • Account Administration
  • End User Support
  • Setup / Troubleshoot Laptop / Desktop / Printing / Meeting Room facilities /Video Conference System
  • Multi-purpose hall Sound System
  • PC inventories & Bi-monthly stock take
  • Skype / MS Team Voice
  • Software Management: Endpoint Central / Intune
  • Microsoft Defender
  • VPN Solution
  • In-house escalation to Level 2/3 Support. Hardware Tech Refresh – Windows 11 Migration, Autopilot implementation

Key Roles and Responsibilities:

• Deliver technical solutions to clients and take responsibility for the standards of work, project sign off and client satisfaction.
• Provide client support, assisting with troubleshooting and design, configuration and escalated problem management.
• Act as key project team members charged with the analysis of client and technical requirements, specifications development, solution design and development, and in some environments may consult on testing and deployment processes.
• Expected to be technology leads for specific technologies and to use their deep knowledge of these technologies to propose enhancements.
• Interact with clients on site to meet complex requirements of a solution.
• Escalate unresolved problems and issues to the relevant third parties.
• Respond to escalated client requests and support client applications to a first line resolution.
• Escalate complex problems to the relevant third parties.
• Write reports and proposals and complete and maintain project documentation.
• Assist with the documentation of standard operating procedures relating to installations and fixes.
• Act as coach and mentor to more junior Implementation Engineers and Technicians.
• Assume responsibility for the co-ordination of the activities of the Engineers, in line with performance targets.
• May be required to serve periodically on the customer service desk, providing third line telephonic, remote and on-site support and problem management.
• Included in higher complexity design work, with input to the design expected.
• Expected to take ownership of relevant technologies according to domain or specialization.
• Knowledge, Skills, and Attributes:
• Good understanding and appreciation of technical design and business principles
• Demonstrates project management and administration ability.
• Good project skills which are demonstrated in the execution of installations and other assignments.
• Demonstrate customer engagement skills.
• Demonstrate relevant domain specialist knowledge.
• Good verbal communication skills
• Client focused and displayed a proactive approach to solving problems.
• Ability to work under pressure.
• Ability to coach, mentor and provide guidance to team members.
• Good understanding of project management principles

Academic Qualifications and Certifications:

• Computer Science / Information Technology Degree or equivalent together with specialized training in new technologies and legacy systems or equivalent
• CCNP (SDN, ACI, SDA, SD-WAN, DNAC), Meraki
• CCNP (Wireless, Meraki)
• ACMA, ACMP, ACCA, ACCP
• ACFE, ACSE
• JNCIA, JUNCIP-ENT, JCIA-MistAI
• CCSE, PCNSE, NSE4
• SolarWinds NPM, NCM
• CCIE – highly advantageous
• F5 Certified Technical Specialist (30X track) – highly advantageous
• Nokia GPON – highly advantageous
• Project management certification

Required Experience:

• At least 5 – 8 years' professional technical experience related to software development, systems design and deployment, or networking and infrastructure within a large scale (preferably multi- national) technology service environment.
• Experience in designing and building complex LAN and large WAN.
• Expertise in routing/switching technology, including BGP, OSPF, etc.
• Experience in designing and building complex data center network with Software Defined Networking (SDN) solutions such as SD-WAN, Cisco ACI, VMware NSX or any OpenFlow protocol.
• Experience in designing and building complex WLAN – Cisco/Meraki/ Aruba/ Alcatel/ Juniper Mist
• Extensive in Network Access Control – ISE/ Aruba ClearPass
• Extensive hands-on LAN switches: Cisco N9K, Alcatel Omni Switches, Juniper EX switches
• Extensive hands-on Wireless site survey; Post & Pre heatmap generation
• Experience in designing and building complex campus network with Software Defined Access (SDA) solutions from Cisco or any other SDA vendors.
• Experience in network automation via scripting (e.g., Python, Ruby) or tools (e.g. Ansible, Algosec, Chef)
• Experience in designing and building network security (Checkpoint, Palo Alto, FortiGate, Cisco firewall, IDS/IPS, VPN, SSL), Content Networking (cache, load balancer, F5, etc.)
• Experience in project management methodologies

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quotation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• Handle tendering processes and engage with clients from oil companies through various communication channels such as meetings, phone calls, and written form tendering clarification.
• Draft and compile technical documentation, such as datasheets, proposal designs, clarification notes, and responses to tender specifications.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience in tendering and quotation process.
• Proficient in Microsoft Office, SharePoint, and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Job Description

• Industry / Organization Type: Manufacturing
• Position Title: QC Engineer / Quality Control Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Work with Process Engineer & Engineering team on QC requirement
• Document inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

APPLY NOW!!!

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirements in PCB Assembly, quality requirements of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to converse with overseas suppliers

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65192 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: Manufacturing/Construction Machinery
• Position Title: Service Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8.15 am – 5.15 pm
• Salary Package: Up to $4,000 + AWS + Meal Allowance + Company Transportation/Transport Allowance + OT
• Duration: Permanent

Key Responsibilities

• Conduct product delivery training for distributors and customers.
• Provide diagnosis guidance and analysis of fault found to Distributor / End-user, remotely via emails and/or calls.
• Carry out field services at sites in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team in locating correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Mechatronics Engineering or relevant studies.
• With at least 2 years of relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Comfortable with travelling internationally within Asia (Entitled to travelling allowance).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65794 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description:

- Conduct routine inspection and evaluates their condition and recommend proper execution during work activities.

- Prepare project schedule and presentation of project.

- Lead the kick of meeting.

- Responsible of project management and quality control.

- Prepare & review Civil and Structural drawing.

- Prepare Quantity Take-off of Civil and Structural Materials for BOQ.

- Prepare bid documents for Civil and Structural Project.

- Witness Dimensional Checking during erection & construction.

- Control and check all fabrication activities.

- Maintain welder performances and welders repair.

- Conduct final walk through inspection and monitor rectification of final punch list item. Safety aspects on construction is defined in safety assurance, procedure and thoroughly implemented.

Requirement:

- Minimum 2-4 years Experiences in Civil and Structural sector process plant.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing (O&G)
• Position Title: Technical Sales Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Develop and grow key accounts in the Oil & Gas or Petrochemical sector.
• Establish and maintain business relationships with target customers to secure sales.
• Cultivate a comprehensive understanding of the customer’s operations and objectives.
• Develop and adhere to optimum profit margins and pricing points.
• Monitor assigned accounts - including progress, customer requests, competitor activity, and execution updates.
• Collate forecasts and reports for each key product/service offering assigned.
• Plan and negotiate long-term contracts with key account customers.
• Present and close sales opportunities to executives at major oil companies.
• Continually push company’s product/services to existing customers.
• Coordinate site work and discuss technical requirements on-site with customers.
• Review customer requests and provide technical solutions.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent.
• Has 3 years of working experience in downstream oil and gas/petrochemical industry preferred.
• Prior experience in flange management is advantageous.
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69726 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities

Mechanical

• Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
• Monitors and ensure all mechanical works are carried out according to the latest revision mechanical drawing and complies with contract specification, class requirements and quality management system.
• Arranges coordinate and carry out all the inspection inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
• Performs material equipment incoming are as per Vendor document;
• Verifies tools and equipment used are as per procedures;
• Familiarizes with mechanical inspection process;
• Verifies NDT are done as per approved NDT plan & procedures.
• Verifies preservation are being performed as per preservation plan & procedures.
• Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
• Prepares review and document inspection records, certificates and NDT reports for the submission to relevant party.
• Checks and endorse inspection record prior to issue to customers.
• Ensures subordinates comply with company’s procedure and work instructions.
• Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
• Implements and compile the monthly key performance indicators (KPI) related to mechanical.
• Verifies mechanical MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.

Dimension Controller

• Implements dimensional control methods and procedures throughout the fabrication and integration process of the modules to meet the requirements of project specifications and codes.
• Conducts dimensional checking using latest electronic total stations before and after welding of the main deck frame and main column of the modules to ensure that the dimensions are within specifications.
• Reviews design drawings, do necessary best fit calculations, prepare professional dimensional control reports using AutoCAD and get approval by the clients and/or certifying authority.
• Maintains dimensional survey equipment and keep proper documentation of dimensional control reports to meet project requirements and QA/QC audit standards.
• Gives guidance and advice to sub-contractors on how they can increase their productivity.
• Liaises with key stakeholders including Client on the dimensional control methods, acceptance criteria in accordance to project requirements.
• Prepares and compile final dimensional control survey reports as part of the final documentation report.

Electrical

• Takes charge of projects, coordinate and carry out all E& I QA/QC activities for the projects including hazardous zone equipment’s inspection (ATEX/CompEx/IECEx Certified).
• Review and evaluate the drawings as per Classification Societies and Client’s requirement.
• Prepares the QA procedures and get it approved with Classification Societies and Client.
• Witness the testing of HV/LV circuit breaker/starter, neutral earthing resister/fuses and cable megger-ing.
• Coordinates all termination inspection of electrical installation of equipment.
• Preparations of electrical or mechanical completion for equipment.
• Carries out the inspection and testing with Class Surveyors and Class Representatives.
• Ensures all quality control documents are compiled and information’s are handed over for as-build.
• Coordinates daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Monitors and ensure all work is carried out according to the latest revision electrical drawing and complies with contract specifications, Class requirements and Quality Management System procedures.
• Checks and endorse inspection record prior to issue to Client.
• Ensures subordinates comply with Company’s procedure and work instruction
• Reports any non-conformance (NC) and issue Corrective Action Request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
• Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
• Implements and compile the monthly Key Performance Indicators (KPI) related to electrical and instrumentation.
• Verifies electrical and instrumentation MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.
• Performs others duties as signed by the superior(s) from time-to-time.

Coating

• Goods knowledge of all international surface preparation standards, painting/coating application standards, inspection standards, contract, specifications, material technical data sheet, material safety data sheet, documentation etc.
• Witness prequalification of painting system, painter, blaster and adhesion testing subjected for project approval before commencement of painting activities.
• Coordinates in-coming coating materials (e.g. paints, thinners, abrasives etc) conditions, data sheet and batch certificates in accordance with project.
• Inspects correct type of blasting equipment and tools to be used to meet the paint quality according to the paint specification.
• Inspects pre-cleaning or solvent cleaning of surface, metal surface imperfection/defects, surface profile of blast cleaned surface using right inspection tools.
• Assesses surface cleanliness soluble salt contamination on blast-cleaned surface and related test such as pull-off test & reports.
• Able to handle painting inspections in blasting and painting inspection of tank coatings, ship hull painting, and structural items
• Coordinates Request for inspection (RFI) to third party and client paint inspectors on hold point and witness point as per project inspection test plan (ITP).
• ·Able to send enquiries to Paint manufacturers for Painting Specification in accordance with project Requirements and Secure Quality document for painting; Inspection & Test plan, blasting and coating procedure.
• Ensures calibration certificates of painting instruments are valid & available for reference
• Supervises the workplace and workers safety.
• Ensures coating is practical and in accordance with the specified requirements by preparing or reviewing drawings, specification, job instruction and material selection notes etc.
• Reviews Inspection Test Plan (ITP) as per project specification and procedures
• Coordinates and perform Coating inspection of structural, piping and outfit works etc. of the assigned project as per approved ITP.
• To monitor all painting/coating related works and ensure all final products meet project specification requirement.
• Conducts surveillance inspection of surface preparation, paint mixing, WFT, DFT adhesion and curing of paints.
• Coordinates with yard QA/QC team for all quality documentation submission to SCM with the construction completion.
• Conducts onsite audit as per relevant specification and customer requirement.

Structural

• Takes charge of project and carry out all QA functions for the assigned project.
• Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
• Monitors and ensure all piping works are carried out according to the latest revision piping drawing and complies with contract specification, class requirements and quality management system.
• Coordinates all the inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
• Materials verification done with the specified mill certificates and codes;
• PMI testing on incoming, welder material;
• Verifies material use on sites are approved project materials;
• Familiarizes with piping inspection process;
• Verifies NDT are done as per approved NDT plan & procedures.
• Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
• Ensures project documents including inspection, traceability records, certificates, radiography films, and NDT reports are submitted to relevant party to signing.
• Checks and endorse inspection record prior to issue to customers.
• Ensures subordinates comply with company’s procedure and work instructions.
• Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
• Implements and compile the monthly key performance indicators (KPI) related to piping.
• Verifies piping MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.
• Performs others duties as signed by the superior(s) from time-to-time.

Requirements

• Degree or Diploma in Mechanical Engineering / Marine and Offshore or equivalent.
• Minimum 5 years of relevant work experiences in shipbuilding / oil and gas / offshore projects as QA/QC Structural Inspector.
• Working in FPSO/FSO/FPU Project will be added advantage.
• Shall be familiar with AWS D1.1, API 2X, ASME Section II, and ABS Class rules.
• Certified Welding Inspector (AWS CWI or CSWIP 3.1)
• NDT Level II in RT/UT/MPI/PT

Our Address and Working Hours:

Seatrium Limited

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Seatrium Limited

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 7:30am - 5:15pm

Fri: 7:30am - 4:15pm

Seatrium Limited

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Ltd and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

1. Diploma or above, major in marketing and business management is preferred.

2. Have more than 2 years working experience in market development or sales. Familiar with medical equipment, aviation equipment and semiconductor equipment industry is preferred.

3. Proficient in English, with good communication and negotiation skills.

4. Be familiar with the Singapore market and understand the local business culture and consumption habits.

5. Have strong market analysis and judgment ability, and be able to formulate effective market development strategies.

6. Have good team spirit and ability to work independently.

7. Be able to adapt to business trip and work pressure, and have strong self-drive and sense of achieving goals.

8. Skillful use of office software and sales tools.

Responsibilities of marketing salesman:

1. Be responsible for investigating Singapore market and global market, collecting and analyzing market information and competing products.

2. Develop Singapore and global customer resources, establish and maintain good customer relationships.

3. Formulate and implement the market development plan and achieve the sales target.

4. Promote the company's products or services, and enhance the brand's popularity and influence in the Singapore market.

5. Coordinate internal and external resources to ensure the smooth progress of the project and meet customer needs.

6. Feedback the market dynamics and customer demand in time, and provide a basis for the company's strategic adjustment.

If you are interested in this job, please contact Mr.Ning @ [email protected] ASAP.

Position: Service Engineer (Product: Microscopes)
Location: Tai Seng, Singapore
Salary: $2,800 - $3,300, commensurate with experience and educational background
Additional Benefits: Monthly mobile and commuting allowance

Key Requirements:

• Education: Diploma in Engineering
• Experience: 1-2 years in field service, ideally in medical device servicing, with exposure to small, delicate parts
• License: Class 3 driving license preferred

Job Responsibilities:

Visit clients’ sites to perform servicing and maintenance on microscopes

Handle small microscope parts with care and precision

How to Apply: Send your resume to Jocelyn Chan at [email protected] or contact via Telegram @jocelynchan.

Jocelyn Chan | Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience) Company EA Licence Number: 99C4599 Personnel EA License: R1331820

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Sales Engineer
• Working Location: Tuas West
• Working Hours: Monday – Friday, 9am – 5.30pm (One Saturday per month, 9am – 12pm)
• Salary Package: Up to $4,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Identify and develop new business opportunities by expanding the customer base.
• Prepare detailed sales reports, monitor project progress
• Act as the primary point of contact between various suppliers and customers to meet project and sales objectives.
• Contribute to achieving the company’s overall sales and marketing goals by aligning with the strategic plans.
• Manage any additional tasks assigned.

APPLY NOW!!!

• Degree in Mechanical, Electrical, or related Engineering fields.
• Willingness to travel across various Asian countries for sales promotions and client meetings.
• Proficiency in Microsoft Word, Excel, and PowerPoint.
• Inexperienced candidates are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70294 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Application Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $3200
• Duration: Permanent

Key Responsibilities

• Assist with vision software, GUI, and SDK integration.
• Develop and implement robotic applications and AI functionalities.
• Conduct evaluations and proof of concept, and create proposals for project initiatives.
• Install and provide on-site system support.
• Contribute to R&D efforts for emerging technologies.

APPLY NOW!!!

• Must Diploma/bachelor’s degree in an Engineering or Physics related discipline.
• Candidates with relevant experience but without the education will still be considered.
• Minimum of one (1) year of relevant work experience.
• Able to travel overseas for work
• Training will be provided for candidates without relevant experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70610 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Sales Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $5000
• Duration: Permanent

Key Responsibilities

• Build and strengthen strong relationships with existing customers to ensure positive rapport and long-term business partnerships.
• Pursue and nurture new business opportunities by following up on potential leads.
• Stay informed on market trends, industry shifts, and evolving customer needs to collaborate with the BD Manager in refining sales strategies.
• Coordinate projects effectively with the Project Manager and key stakeholders to ensure smooth execution.
• Engage in supplier collaborations to stay updated on the latest applications and technological advancements

APPLY NOW!!!

• Min. Engineering related Diploma/Degree
• Minimum of one (1) year of relevant work experience.
• Training provided for candidates without experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70611 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Network Engineer
• Working Location: Kallang
• Working Hours: 5 days (Mon – Fri, 9 am – 6 pm)
• Salary Package: Basic Up to $7,500 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Develop client business by exploring opportunities, guiding client needs, and designing solutions.
• Provide after-sales technical support to major accounts, including service management, channel management, pre-sales testing, project implementation, troubleshooting, and customer service planning.
• Coordinate resources (technical, sales, R&D, service providers) to ensure smooth project progression and address any issues promptly.
• Support client and market success by consolidating industry experience and standardizing knowledge through training and process improvements.
• Analyze the Asia-Pacific telecommunications market to understand demand, competition, and industry trends, and provide feedback to help the company gain a competitive advantage.

APPLY NOW!!!

• Diploma or higher in Computer Science, Information Technology, Engineering, or related field.
• Network-related certifications like CCNA, CCNP, and CCIE are preferred.
• 3-5 years of experience in network solution design or on-site delivery, preferably in the Singapore market.
• Experience in designing and implementing cloud data centers or campus networks.
• Proficiency in network protocols (BGP, OSPF, SSH, VRRP, STP, NetConf, HTTP/HTTPS, DNS, DHCP).
• Familiarity with network automation tools (Ansible, Terraform) and scripting (Python, Shell).
• Ability to troubleshoot complex network environments using tools like Wireshark.
• Deep understanding of network technology and industry trends in the Singapore market.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67599 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Your Role

• Coordinate design drawings with consultants to comply with requirements of the authorities
• Review and provide solutions to technical problems as well as plan, monitor and report shop drawing production progress
• Prepare technical submissions for materials, construction methods and C&S shop drawings
• Resolve construction issues on drawings and liaise closely with Architectural and M&E teams as well as the authorities
• Supervise a team of BIM Modelers for the production of coordinated shop drawings and Concrete Body Plans

The Requirements

• Possess a Degree in Civil/ Structural Engineering with relevant design working experience with contractors
• Preferably a Professional Engineer registered with the Professional Engineers Board, Singapore
• At least 3 year(s) of working experience in the related field is required for this position.
• Be conversant in British & Singapore Design Standards
• Be independent, analytical, highly motivated with excellent team spirit and interpersonal skills

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Service/Sales Engineer
• Working Location: Tuas
• Working Hours: 5 days (Mon 8 am – 5 pm, Tue – Fri 8 am – 6 pm)
• Salary Package: Basic salary up to $3,600 + Transport Allowances + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Attend to customer inquiries and requests for spare parts and services.
• Plan and execute sales action plans to engage and follow up with prospects.
• Assist in preparing proposals, tenders, and quotations.
• Build strong customer relationships and identify business opportunities within the industry.

APPLY NOW!!!

• Diploma or Degree (strong relevant experience required if no diploma).
• Good communication and presentation skills.
• Self-motivated to work.
• Possess Class 3 Driving License and own vehicle (preferred). Transport allowance provided if own vehicle is used.
• At least 1 year of sales experience in the Heavy Industry.
• Knowledge of ERP systems is an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68290 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description:

• Analyse client needs, scope problems, and develop business cases to address them.
• Document requirements, source, and evaluate alternatives, and recommend suitable solutions that best aligns with specific client needs.
• Collaborate with client and application vendors for solution design and to seek clarification and acceptance.
• Design, develop, and deliver software applications that satisfies customer expectations.
• Improve software quality using XP practices, including code review and unit testing.
• Prepare architectural and other technical documentation.
• Assist Business Analysts with user stories elaboration.
• Support QA teams with test automation and bug fixes.
• Assist DevOps teams with build and release automation.
• Work with Client users to ensure smooth deployment and adoption of new solutions.
• Assess business needs for service requests and the impact of enhancements to the system.
• Evaluate problem resolution approaches and implement effective recovery plans for ICT incidents, establishing processes to prevent recurrence.
• Understand IT management policies, quality management policies, and security guidelines to ensure compliance in development processes.

Job Requirements:

• Degree or Diploma in Computer Science, Computer/Electronics Engineering, Information Technology or related disciplines.
• Prior experience with version control systems such as Git.
• Proficiency in front end technologies such as Angular.
• Prior experience in backend technologies such as Java, Python, Node.js.
• Proven experience in low code application platforms such as Pega.
• Knowledge in one or more of the following processes: agile processes, continuous integration/deployment, cloud/PaaS platforms (e.g., AWS, GCP), serverless frameworks, and container technology like Docker would be an added advantage.
• Prior experience with low code development and wireframing tools such as Figma
• Familiarity with unit testing.
• Additional advantageous traits include being self-driven, independent, strong problem-solving skills, good communication, interpersonal skills, and excellent presentation and listening abilities.
• Hands-on experience with at least one full project development lifecycle in Pega.
• Relevant professional certification in Pega is a plus.
• Prior experience in Agile and UX development environments is an added advantage.
• Advantageous skills include consulting or business analysis experience, knowledge of system solutioning for mid/large-scale projects, understanding of web services, REST APIs, sFTP, and security concepts.
• Extensive experience in defining UAT test scenarios and facilitate SIT and UAT tests.
• Ability to define system interface specifications.

Responsibilities:

1. Assist in managing and analysing data assets, ensuring data quality and accuracy.
2. Collaborate with teams to understand data needs and contribute to data solutions and projects.
3. Utilize data analytics tools and techniques to assist in deriving meaningful insights.
4. Support data visualization efforts to communicate findings to stakeholders.
5. Participate in data governance and compliance initiatives to uphold data security and privacy.
6. Contribute to the documentation of data processes and procedures.
7. Stay informed about industry trends in data analytics and best practices.
8. Provide support in data-driven business planning and performance enhancement.

Qualifications:

• Bachelor's degree in Software Engineering, or a related field.
• Minimum 5 years of experience or understanding of data analysis, data management, and data visualization.
• Hands on experience with data analytics tools such as SQL, Python & Coding
• Good problem-solving and analytical skills with an eagerness to learn and grow.
• Strong attention to detail and organizational abilities.
• Collaborative mindset and willingness to work in a team-oriented environmen

Interested candidate please submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://sg.go.persolkelly.com/job/apply/10579

We regret to inform that only shortlisted candidates will be notified.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance, and skills upgrading services, and partnering with employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nationwide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use, and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E • EA License No. 01C4394

• Registration ID <R1105286> (Ngiam Xinyi)

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Production Engineer
• Working Location: Tuas (Transport provided)
• Working Hours: 5.5 days (Mon - Fri. 8.00 am - 5.00 pm; Sat, 8.00 am - 12.00 pm)
• Salary Package: Basic salary up to $5,000 + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Coordinate all aspects of assigned tasks to ensure efficient production flow.
• Provide monthly production input and identify areas for improvement.
• Offer technical leadership for new and existing challenges.
• Create and maintain process instructions and documentation.
• Develop, record, and present reports for monthly production meetings.
• Perform assembly tasks and guide technicians/operators as needed.

APPLY NOW!!!

• Diploma or Degree in Engineering or a related professional certification.
• Proficient in Microsoft Office.
• Able to work with minimal supervision.
• Effective team player with good communication and presentation skills.
• 2-5 years of relevant experience in related industry.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69139 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechanical Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide guidance and technical assistance to sales and service teams.
• Offer customized solutions for technical issues and sales inquiries.
• Assist the service team with equipment repair and maintenance.
• Develop procedures for equipment testing, maintenance, and operation.
• Coordinate in-house product assembly and validation testing and produce test reports.
• Conduct technical presentations and product training for clients.
• Create and maintain drawings, bills of materials, and design documentation.
• Discuss technical requirements with clients on-site and coordinate site work.
• Prepare method statements and reports for site work.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience in Mechanical Engineering, preferably in O&G industries
• Prior experience in flange management is advantageous
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69140 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Highlights

• Permanent Position / MNC/ Near Woodlands MRT/ Urgent Hiring!!
• Afternoon Shift (Monday to Friday: 3pm – 11pm, Sat: 1pm - & 7pm)
• Afternoon Shift allowance
• AWS bonus, Annual Leave,Medical Benefit, Dental Benefit

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities

• Responsible for all automation related activities of the product.
• Responsible for the Maintenance and Repair of production automated machines.
• Optimise automation parameters and meeting specific cycle time for existing and new products.
• To provide timely support to ensure efficiency of production machines & equipments are met.
• To work with respective department on product quality issues.
• Initiate containment plan and implement effective long term plan on quality related issues
• Attend to all daily quality and process related issues.
• Execute process validation for new and existing products with tooling and quality personnel.
• Continuous Improvement to enhance quality and productivity through automated processes
• Perform internal quality system audit.
• Train and assess production staff on processes and product where applicable.
• Attend routine production and quality meetings
• Execute engineering change notice from customer.
• Analyze quality data collected periodically and provide recommendation to management for improvement

Requirements

• Degree/Diploma in Engineering-related discipline, preferably Mechatronics
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA
• Results-oriented, meticulous and a self-motivated team player

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg