Roles and Responsibilities:

• Responsible for preparation and delivery of process calculations, design drawings and other documents for water, wastewater treatment, and air treatment projects.
• Aware the requirements for full compliance to local authorities
• Conduct process calculations such as treatment unit sizing, pipe or ducting pressure losses for above mentioned projects.
• Design PFD, P&ID drawings for these projects.
• Select equipment or propose the parameters for selection of equipment such as pumps, fans.
• Design the layout and section views of the overall treatment system including process treatment units, equipment, and pipings and ductings with the help of drafters.
• Prepare other textual documents in process discipline such as control philosophy, datasheets.
• Evaluate technical documents from subcontractors and suppliers.
• Coordinate the works with mechanical engineers, and electrical, control and instrument engineers.
• Provide technical support to sales and project teams.
• Develop or provide design recommendations, value engineering and training to clients or co-workers
• Liaising with other departments (Project, QAQC or Commissioning) on schedule and deliverables timeline.
• Report to engineering manager.

Requirements:

• A recognized degree in environmental engineering, chemical engineering, mechanical engineering, or all other process related engineering.
• 3 years above work experience in water, wastewater treatment, or air treatment.
• Master degree holders with less experience will be considered.
• Proficiency in CAD, MS office or other design softwares.  Strong analytical and problem solving, critical thinking skills.
• Experiences in ultrapure water treatment, air treatment scrubbers, and thermal oxidizers are preferred.
• Good writing and communication skills.

• Manage & develop new customers based for spare part sales in the industrial, Marine & Offshore/Oil Gas market.
• Responsible for maintaining a high standard level of customer services and good customer relation.
• Responsible for maximizing a high level of profit margin and ensure meeting the pre-set sales target.
• Executing sales & marketing strategies to maximize opportunities in both domestic and international markets.
• Make sales presentation and provide technical support to customer
• Gather information on market demand, competition and latest technologies.
• Submission of weekly, monthly and quarterly reports.

The Field Service Engineer is responsible for providing technical expertise and support at customer sites within the maritime industry. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.

The Lead Project Engineer is responsible for achieving project objectives within the defined time and cost framework while ensuring full delivery scope and quality. This role involves comprehensive project management, technical verification, and stakeholder communication to ensure customer satisfaction and successful project execution.

Key Responsibilities:

Project Objectives & Delivery

• Achieve project objectives within the defined time and cost framework.
• Ensure the delivery scope and quality meet the desired standards.

Customer & Stakeholder Liaison

• Liaise with the Customer, End User, and/or appointed Engineering Contractor.
• Ensure technical compliance with specifications.
• Technically verify customer requirements for order processing.

Project Management & Execution

• Manage projects within budget and on schedule until customer acceptance and hand-over.
• Oversee tender evaluation and provide Project Management support.
• Source third-party components and manage subcontractors.

Documentation & Data Management

• Manage documentation required by the project.

Team Leadership

• Lead and mentor other project team members when necessary.

Progress Reporting

• Report regularly to the Project Department Manager on project progress.

Responsibilities:

• Plan, design and supervise C&S engineering works (e.g. buildings, roads, drains, sewers, earthworks, underground buildings, temporary structures).
• Perform analysis and design for the project.
• Supervise the drafting of drawings related to design.
• Ensure all engineering works comply with relevant statutory standards, regulations and Codes of Practice.
• Manage project stakeholders, clients, design team, site team and other relevant parties.
• Coordinate with contractors, project team and design consultants.

Requirements:

• Possess a Civil and Structural Engineering degree recognized by the Professional Engineers Board of Singapore.
• Prior working experiences in structural engineering projects preferred.
• Familiar with structural engineering design to local Codes, Regulations and requirements,and Eurocode.
• Well verse in structural design software, e.g. ETABS, STAAD Pro, SAFE, SAP 2000, MIDAS, etc.
• Familiar with authority submission requirements for civil-structural works.
• Experience in design/project management works in BIM.
• Conversant with statutory code and requirements for site supervision, quality control procedure and construction administration.

ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB

We are seeking an Electric System Design Engineer to design hydraulic and electric systems for Ro-Ro equipment. As a key team member, you will be responsible for developing high-performance systems that meet safety, regulatory, and operational requirements in Marine Industry. Fresh graduates from Electrical, Mechatronics, or Mechanical Engineering backgrounds are encouraged to apply, as we provide training and development opportunities to enhance your skills.

Qualifications:

• Bachelor’s degree or higher in Electrical, Mechatronics or Mechanical Engineering.
• Strong problem-solving skills and active communication skills.
• Excellent interpersonal and collaboration skills.
• Experience in the design of hydraulic and electric system add value.
• Experience in both of Shipbuilding and Marine industry will be a significant plus.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

As a Salvage engineer, the world is your playground. You never know when or where a ship gets into trouble. That is why for a Salvage Engineer literally every day is different. It sounds like a cliché, but it is the reality. As a Salvage Engineer, you will have an adventurous job. When a ship is in distress, you will travel to the emergency scene with a multidisciplinary team. Once on-site, you work together with the team to repair the ship's plant and get the systems up and running again. It is vital to salvage the vessel as quickly as possible. As well as working on actual ship salvage operations.

Your responsibilities as a Salvage Engineer

• As part of the mobile team, provide support to the Salvage Master/Project Manager at site.
• When at base, assisting the technical manager and the operations manager in the selection of new salvage equipment and setting up the right maintenance procedures.
• Maintaining company owned salvage equipment.
• Sharing knowledge with other engineers about complex ship's systems.
• Advising the salvage inspector and superintendent about how to break into existing ship's systems in order to use them during the salvage operation.
• Producing reports about the actions taken to get systems operational again. As you can expect from a leading international maritime service company, you will work with state-of-the-art equipment.

Your qualities
To make your mark as a salvage engineer with SMIT Salvage, you will need a flexible approach; you never know when or where your next project will be. You adapt easily to working with different teams and you are fully proficient in English. Of course, you are happy to work irregular hours and to spend longer periods of time abroad. In addition, you have:

• A minimum degree in any field with experience sailing onboard ships.
• Worked for at least 5 years on modern (merchant) ships.
• Preferably experience with a range of different types of vessels and engine-room plants.
• Willingness to work on weekends and public holidays frequently, with OT and allowances compensated.

Job Responsibilties:

• Plan and design mechanical engineering works for building services.
• Prepare reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Conduct design presentations, review shop drawings and material/equipment submissions, handle RFIs and other contract administration duties.
• Oversee the installation, testing and commissioning of Mechanical engineering works.

Job Requirements:

• Degree in Mechanical Engineering from a University recognized by the Professional Engineers Board, Singapore.
• Minimum 3-5 years of relevant experience in mechanical engineering design.
• Good working experience in a consulting firm with proven track records in major development projects.
• Knowledge of mechanical engineering design systems software.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.
• Conversant with local codes and regulations, and authority submission procedures.
• A team player, able to work both independently and as a group, ensuring excellent project delivery to Clients and other stakeholders.

1. Lead sales and operation / project team

2. Set direction and guide the project team for all the project

3. Ensure project all is provided with support and advise all aspects of project planning, execution, monitor and control

4. Value engineering, lean engineering and selection of equipments

5. Liaising with main contractor, owner, stakeholder & consultant

6. Check and ensure the scope of work for all the fire protection system and services

7. Prepare weekly, monthly report and project budget

8. Overseeing current project as well upcoming projects

9. Attend and conducting project review and attend meeting

10. Ensure the project delivery as planned schedule and manage operational cost within the budget

11. Prepare and submit authority required documents

12. Monitor compliance of work with the workplace safety and health regulations

13. Maintain customer relationship

14. Knoweldge in AUTO CAD & Revit

14. Other ad-hoc duties as assigned by management

About the Opportunity

The IT Engineer provides support to employees experiencing technical problems and performs troubleshooting, problem diagnosis, resolution, and escalations. In-depth knowledge and hands-on experience with system and server administration and virtualization experiences are required. Area of expertise for this position includes Microsoft technologies, VMware virtualization, Citrix VDI, Linux and storage. Prior experience supporting L1 and L2 requests in IT would be helpful for this position.

Job Responsibilities:

• Primary responsibilities will include overseeing and executing system-based projects, writing scripts to automate manual processes, and creating system documentation & diagrams. Provide system administration and configuration of specialized mission applications and software.
• Strategic Infrastructure Management: Global Administration, maintenance, and support of the Server environment and VDI infrastructure, ensuring optimal performance and scalability to meet the evolving needs of the organization as the need arise.
• Incident Resolution and Technical Escalations: Act as a point of escalation for complex technical issues, leveraging your advanced troubleshooting skills to swiftly diagnose and resolve incidents, minimizing impact on business operations.
• Advanced Problem Analysis and Resolution: Conduct in-depth analysis of system problems, particularly those related to hardware, software applications, and operating system servers, employing sophisticated diagnostic techniques to implement effective solutions.
• Comprehensive Documentation and Knowledge Management: Develop and maintain comprehensive documentation, including automation scripts and procedures, to streamline troubleshooting processes, enhance team collaboration, and ensure continuity of operations.
• Root Cause Analysis and Problem Management: Lead root cause analysis efforts for critical problems and major incidents, identifying underlying issues and implementing preventive measures to mitigate future occurrences, thereby safeguarding business continuity.
• Proactive Performance Monitoring and Security Compliance: Utilize advanced monitoring tools and command-line interface utilities to continuously assess server performance, identify potential vulnerabilities, and ensure adherence to stringent security standards.
• Change Management and Risk Mitigation: Spearhead the planning, coordinating, and executing system software upgrades, patches, and firmware updates, meticulously evaluating risks and impacts to minimize disruptions and maintain system integrity.
• Effective Communication and Stakeholder Engagement: Interface with IT management, end-users, and departmental teams to communicate feedback, share insights, and champion initiatives aimed at enhancing operational excellence and delivering exceptional service quality.
• Follows SOP: Support procedures and provides troubleshooting guideline and cause analysis for technical issues

Job Requirements

• BS degree or equivalent experience.
• 8 + years of advanced experience as a IT Administrator or Engineer with hands on experience in servers, virtualization and storage.
• Active Directory (AD) & Domain Controller Administration including DNS and GPO management in a multi-site environment.
• Building and administering Windows\Linux servers and accompanying infrastructure, maintaining capacity and performance in enterprise environment.
• Candidates must possess experience with both Windows and Linux mixed environments.
• Experience with Infrastructure – virtual environment, VDi, Citrix Netscalar, Backup& Restore, disaster recovery and business continuity
• Hardware: Dell MX7000 Chassis and MX700 series blade configuration, PowerEdge rack servers
• Storage: NFS and ISCSI storage concepts. Cronjobs and rSync functionality
• Networking: TCP/IP, VLAN, DNS, Load Balancing and security concepts
• Virtualization: VMware 7 and above and Citrix Storefront
• Transferable Skills: Communication, ability to work with a diversity of people, ability to plan and organize, time management, analytical problem solving, Project Management, & customer service skills.
• Strong communication and collaboration skills
• Ability to work independently and as part of a team.
• Willingness to learn and adapt to new technologies and processes.
• Ability to multi-task in a fast-paced IT environment with fluctuating priorities and deadlines.
• Ability to interface and work with varied positions and levels of technical knowledge both within the department and with other departments in the company.

- Designing electrical system

- Ensure designs meet industry standards and regulations

- Knowledge of design techniques

- Prepare technical documentation and reports

- Responsible for producing schematic drawings

- Proficiency in electrical design software (e.g., AutoCAD, Solidwork)

- Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.

- Assist and collaborate with other project team members to comply with project requirements and meet project schedules

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection.
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality.
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules.
• Check and ensure all the temporary work is carried out as per PE design.

Requirements

• Degree in Civil, Mechanical or Electrical, or a related field.
• Min 2 to 3 Years Relevant Work Experience (MEICA)
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Key Responsibilities:

• Design and develop electrical systems, components, and wiring diagrams.
• Design and oversee the electronics hardware design activities of the whole product.
• Select electrical/electronics components for new product development, and replacement for existing products as well.
• Conduct electrical testing and troubleshoot systems to ensure functionality.
• Collaborate with cross-functional teams (e.g., mechanical) on product development.
• Liaise with supplier and operation for design improvement.
• Provide technical support of products introduced into both the domestic and international markets.
• Work closely with a multidisciplinary team to drive cost optimization, manufacturability, quality and reliability.
• Provide technical support during installation, commissioning, and maintenance of systems.

Requirements:

• Bachelor’s degree in electrical engineering or related field.
• Proficient in electrical design software tools
• Strong knowledge of electrical systems, power distribution, control systems, and circuit design.
• Strong problem-solving skills and attention to detail.
• Hands-on experience with hardware testing, troubleshooting, and equipment commissioning.
• Experience in microcontroller platform hardware design is a plus
• Knowledge of HVAC systems is a plus.

Company Description

Working at Boskalis is about creating new horizons and sustainable solutions. In a world where population growth, an increase of global trade, demand for (new) energy and climate change are driving forces, we challenge you to make your mark in finding innovative and relevant solutions for complex infrastructural and marine projects.

Within a vibrant company culture, you will be working as part of a diverse, international team of experts. We offer you the opportunity to realize your full personal potential and expand your professional career by creating new horizons. Together!

Job Description

As a Salvage Engineer, the world is your playground. You never know when or where a ship gets into trouble. That is why for a Salvage Engineer literally every day is different. It sounds like a cliché, but it is the reality. As a Salvage Engineer, you will have an adventurous job. When a ship is in distress, you will travel to the emergency scene with a multidisciplinary team. Once on-site, you work together with the team to get the ship systems up and running again. You are responsible for the vessel maintenance, trouble shooting, and on-site repairs of our salvage equipment. It is vital to salvage the vessel as quickly as possible. As well as working on actual ship salvage operations.

Your responsibilities as a Salvage Engineer

• As part of the mobile team, reports to the Salvage Master/Project Manager at site.
• When at base, assisting the technical manager and the operations manager to set up the right maintenance procedures and carry out the planned maintenance system of our equipment.
• Sharing knowledge with other engineers about complex ship's systems and maintenance solutions.
• Advising the salvage inspector and superintendent about how to break into existing ship's systems in order to use them during the salvage operation.
• Producing reports about the actions taken to get systems operational again. As you can expect from a leading international maritime service company, you will work with state-of-the-art equipment.

Your qualities

To make your mark as a Salvage Engineer with SMIT Salvage, you will need a flexible approach; you never know when or where your next project will be. You adapt easily to working with different teams and you are fully proficient in English. Of course, you are happy to work irregular hours and to spend longer periods of time abroad. In addition, you have:

• An experience sailing onboard ships.
• Worked for at least 5 years on modern (merchant) ships.
• Preferably experience with a range of different types of vessels and engine-room plants.
• Ability to handle heavy duty diesel machineries, hydraulic, pneumatic and basic electrical etc.
• Willingness to work on weekends and public holidays frequently.

Qualifications

What you can expect

• Career opportunities: We challenge you every day to get better. Together we realize your full personal and professional career by creating development opportunities.
• Warm welcome: We warmly welcome our new colleagues, so they feel at home as soon as possible. During your onboarding program, we give you all the ins and outs of Smit Salvage!

Extra information

• Your team: As a Salvage Engineer, you will work for SMIT Salvage Singapore. You will work for one of the largest salvage companies in the world. You are part of a team of 6 Salvage Engineers. You will also work with various other colleagues who are part of the Salvage team.
• Where you will work: You will work at our warehouse in Singapore (23 Gul Road) and at project locations onboard vessels worldwide.
• Procedure: You can easily apply by filling in the online application form and uploading your CV and cover letter. You will always receive an immediate confirmation of receipt by e-mail. It is not possible to apply by email, the contact form or by post. Depending on the position, we invite you for two or more job interviews. If you have successfully completed all steps, you will receive an offer from us and we would like to welcome you to Smit Salvage Singapore!

Additional information

We’ll be happy to answer your questions about the position of Assistant/Salvage Engineer. Please contact Arshad Asharaf, corporate recruiter via our careers page.

Interested? Please apply by filling in your details and by uploading your cover letter and CV on our careers site.

Disclaimer for recruitment and selection agencies

We appreciate your interest in our vacancies and understand that your candidate might be enthusiastic about this exciting opportunity. However, our recruitment process is not structured this way, at Boskalis we handle recruitment ourselves. Therefore, we do not accept unsolicited applications or CVs from recruitment agencies. Any submission will be treated as a direct application.

LI-AASH