Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilities

• Develop technical designs of roadworks and highways, traffic diversion schemes and delivery models according to different standards and requirements.
• Planning and supervising projects.
• Responsible for temporary traffic diversion scheme to suit construction progress.
• Coordination with relevant authorities for purpose of obtaining information and approvals.
• Preparation of Traffic Management Plan (TMP) for construction project.
• Preparation of tender documents and proposals.
• Preparation of Traffic Management Plan for road widening and viaduct construction project.
• Stakeholder management & liaising with different authorities.

Requirements

• Preferably with a Degree in Traffic Engineering and above or equivalent.
• Min 10 years experience in construction industry .
• Able to work as a team, assertive, independent, and proactive.

JOB DESCRIPTION

• Plan and co-ordinate on the project progress and schedule and ensure timely completion
• Attend project meeting and prepare report for project progress update
• Prepare project budget and cost estimation
• Coordinate and plan to achieve project milestones, project deliverables and schedule monitoring
• Manage, control and monitor all project activities such as engineering design, site execution, testing and commissioning of project
• Prepare / review as built iso for claim purpose, follow up with client for any outstanding DO issue
• To prepare progress claim report and submit progress claim documents according to client requirement
• To prepare operations and maintenance manual after project completion
• To coordinate with inter-departments for operations matters (procurement, engineering, group office)

Competency Requirements

• Diploma or Degree in Mechanical Engineering
• At least 3 years of working experience in the related field
• Familiarity with semi-conductor/construction industry
• Proficient in Microsoft Office
• Knowledge of QA/QC procedure (PQR/WPS) will be an added advantage
• Multi-tasking team player with excellent interpersonal and communications skills
• Attended QEHS related awareness training

Job Responsbilities

• Prepare of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Perform technical proposal c/w PFD, P &ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new product technical evaluation

Job Qualifications

• Degree in Chemical/Mechanical/ Electrical Engineering
• Technical knowledge (i.e. Process Design and calculation) in membrane (MF/UF/RO/MBR), Ion Exchange (2B3T, MB, CPU, EDI) and pretreatment processes (coagulation/ flocculation, sedimentation, clarification, filtration)
• Relevant project management / plant testing & comissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details

Please include your current and expected Salary in your resume.

· Provide technical supports before & after sales

· Sourcing, compiling of costing, preparation of proposals

· Reviewing of sales inquiries, tender specifications, drawings etc.

· Corresponding with supplier and customers

· Prepare/submit quotations/proposals after reviewed & approved

· Handle ordering processing

· Reviewing of purchase orders against drawings, specifications, BOM and/or RFQs

· Diploma in Mechanical/Electrical/Mechatronics with experience preferred

· Higher Nitec/Nitec in Engineering with experience are welcome

· Outspoken personality, able to work independently as well as a team player in pressurized environment

· Transport provided in Boon Lay

· Training will be provided

· Work in customer’s site if requires

· Entry level candidates are welcome

· Both genders may apply

· Estimate Monthly Salary : SGD2,500.00 to SGD3,200.00

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for an individual to join us as a NOC IT Shift Engineer (2 year contract)!

A brief summary of your job responsibility:

• Performs regular system, application and network (“System”) health checks to verify that the System is operating optimally.
• Monitors and identifies IT system abnormalities, resolves problems, or escalates to relevant parties for help.
• Performs first-level trouble-shooting on the Systems and escalate to second-level teams for assistance.
• Provides technical support during disaster recovery, contingency test, scheduled maintenance, system change requests, software installation, system equipment problems, etc.
• Generates inventory and statistical reports for monitoring, analytics and audit purposes.
• Generate reports, updates, escalates, and close of incident tickets.
• Reviews and verifies the accuracy of operational procedures and processes. Provides recommendations to improve systems or to streamline processes.
• Maintains and updates System’s documentation and inventories.

To succeed in this role, you will ideally have:

• Minimum a year of technical support experience in a NOC environment is preferred.
• Work in teams of 12 hours rotation shifts that span across weekends and public holidays.
• Able to follow documented work instructions and procedures.
• Good written and verbal command of written English

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience. Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

• Leave Benefits with additional perks such as Family Care and Birthday Leave.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Contract Staff enjoys the same benefits as Permanent Employees.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Data Engineer to join us! If you're being selected, you'll be hired as a contract employee.

As a Data Engineer, a brief summary of your job responsibility:

• Perform data extraction, cleaning, transformation, and flow.
• Design, build, launch and maintain efficient and reliable large-scale batch and realtime data pipelines with data processing frameworks.
• Integrate and collate data silos in a manner which is both scalable and compliant.
• Collaborate with Project Manager, Frontend Developers, UX Designers and Data
• Analyst to build scalable data-driven products.
• Be responsible for developing backend APIs & working on databases to support the applications.
• Bridge the gap between engineering and analytics.
• Work in an Agile Environment that practices Continuous Integration and Delivery
• Work closely with fellow developers through pair programming and code review process

To succeed in this role, you will ideally have:

• Experience with building production-grade data pipelines, ETL/ELT data integration with proper documentation
• Proficient in general data cleaning and transformation (e.g. pandas, pysparks, SQL)
• Knowledge in database design and various databases (e.g. structured dbase(postgres, mysql etc and unstructured -mongodb  etc)
• Knowledge about system design, data structure and algorithms
• Knowledge with rest api and web requests/protocols in general
• Comfortable coding in at least 2 scripting language (eg. Python/SQL)
• Comfortable working in both windows and linux development environments
• Interest in data engineering in a big data environment using Cloud platforms (i.e. AWS, Azure, Google Cloud)
• Familiar with data modelling, data access, and data storage infrastructure like Data Mart, Data Lake, and Data Warehouse.
• Proficient in creating comprehensive data dictionaries to ensure clear and consistent data definitions.
• Skilled in designing Entity-Relationship Diagrams (ERDs) to visually represent data models and relationships.
• Capable of collaborating with stakeholders to understand business processes and develop effective data solutions.
• Familiar with BI Tools such as Tableau
• Familiar with Docker containers

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Contract Staff enjoys the same benefits as Permanent Employees.
  

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Job Summary

The Lead Repair Development Engineer, Laser Ablative Technology, is responsible for designing, developing, and optimizing laser ablation processes in cooling holes clearing application. You will be part of AMRT (Advanced Manufacturing & Repair Technology) Breakthrough team and support industrialization of process around the global repair network to deliver quality and productivity, as well as transactional services growth.

Key Responsibilities:

• The focus for this role is to lead to identify, develop, industrialize, and globalize laser ablation processes for cooling holes clearing technology for the services network. This role can affect short-term and long-term business goals.
• Hands-on experimentation to apply and integrate advancements in laser technology to enhance process efficiency and quality
• Recommend approaches to meet the technical and program requirements.
• Understanding of laser system and ensuring compliance with safety standards.
• Identify project, develop, industrialize and globalize cooling holes clearing technology for the services network
• Collaboration with cross-functional teams on development and implement of technology
• Provide technical leadership to other personnel; mentor others in the organization
• Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures
• Monitor and communicate project status, business issues, and significant developments
• Lead or participate in organizational efforts in assigned projects and/or tasks
• Participate as a presenter or reviewer in technical and program reviews

Qualifications/ Requirements

• Bachelor’s Degree in Engineering, Physics, Chemistry, Materials from an accredited college or university
• Minimum of 10 years of manufacturing experience and at least 5 years of experience in Laser technology
• Experience in laser physics and ability to demonstrate a proactive approach to solving complex technical challenges through direct engagement with equipment and processes.
• Basic understanding of robotic concepts and systems, including vision systems and kinematics
• Ability and willingness to travel a minimum 10% of the time, as required
• Able to demonstrate experience in project management and hands on trials
• Strong analytical and problem-solving skills
• Ability to work collaboratively in a team environment
• Good communication and documentation skills

About Us

VFlowTech (VFT) is reinventing energy storage with Vanadium redox flow technology, with a vision to develop the cheapest and most scalable Vanadium redox flow batteries in the world. VFT storage solution has an expected life span of 25 years and is proven to be one of the safest and most environmentally friendly battery technologies. VFT founders have deep experience in the renewable space, and Vanadium redox flow technology. VFT is a spin-off of the CleanTech lab of Nanyang Technological University (NTU), Singapore, and benefits from unique IP arising from many years of intensive research at NTU.

Job Responsibilities

• Develop and conduct research in development of high-power density vanadium redox flow battery stack by designing flow fields, manifolds, material treatment etc.
• Design, model, simulate, test, and characterize vanadium redox flow battery stacks of various sizes.
• Perform material and electrochemical characterization (both in-situ and ex-situ techniques such as cell cycling, CV, EIS, segmented cell, polarization tests, pH tracing, spectroscopy, XRD, through plane/ in plane resistivity, etc.) to reduce the stack resistivity and improve the capability to operate at high current density.
• Project management including project planning, progress tracking, manage resources, and work together with interns, research staffs and international collaborators.
• Develop IPs and Publish in high quality journals.

The work requires an in-depth understanding of electrochemistry of flow batteries, simulation/modelling skills, material fabrication, material characterization tools, and engineering integration of various components of vanadium redox flow battery stacks. The candidate should be able to work on dynamic, product-oriented group and manage the multiple tasks independently. Passion for research and multitasking abilities makes you the head of research group at VFlowTech with additional benefits.

Job Requirements

• Bachelor, Master’s Degree or PhD in Power Electronics, Renewable Energy, or relevant faculty.
• Knowledge about solar/photovoltaic (PV), wind, or fuel cell power generation systems.
• Knowledge of microgrid systems and their interactions with distribution systems.
• Experience in hardware-in-loop modeling and simulations.
• Knowledge of different microgrid control architectures, different control modes of inverter-based resources, droop controls, consensus algorithms and their applications on microgrid load power sharing and voltage regulation.
• Experience in analyzing and modeling the dyanamics of a diversity of distributed energy and emerging grid resources (solar, wind turbine, small hydros, microturbines, energy storage, electric vehicle charging, power flow controller, etc.)
• Ability to provide engineering specifications and electrical drawings, to conduct field testing and troubleshooting.
• Extensive knowledge of industry standards, and government regulations.

Desired Skills and Experiences

Power Generation, Cell, Troubleshooting, Written English, Modeling, Electrical, Estimates, Structural Engineering, Simulations, Renewable Energy, API, FEED, Soil, Manufacturing, Electronics, Design Management

Your benefits

· Receive support in your own self-development (regular feedback and coaching sessions, access to personal development material, workshops, start-up presentations, and networking events)

· Make key decisions that impact the future of the company

· Enjoy regular team lunches and social events

· A secured employment in a constantly growing company and a future-proof industry with a multitude of personal development opportunities

· Work in an environmentally conscious company - we see climate action as a responsibility

· Competitive remuneration package

· Dental and Medical Benefits

Our company culture

Our team is diverse, international and shares the drive to make a difference and create change.

· We encourage our team to bring in their ideas and take initiatives that make them proud of

· We foster a rapidly scaling working environment with a very entrepreneurial, innovative and collaborative culture

CYSREN was established to address these concerns through multi-disciplinary research and development around cybersecurity, leveraging NTU’s core competencies in Engineering, Exact Sciences, International Studies and Business, among others.

We have a dedicated core team that uses its domain expertise and global experience while leveraging on NTU’s vibrant research culture and comprehensive R&D infrastructure to deliver state-of-the-art R&D projects. We engage with local as well as global agencies and industry partners to develop capabilities for a number of areas of strategic importance including:

• cyber worthiness of autonomous vehicles
• cyber risk management, advanced threat intelligence
• secure-by-design for IoT and policy
• governance of cybersecurity

For more details, please view https://www.ntu.edu.sg/cysren.

We are looking for a Research Engineer to contribute to advancing research in software security and source code auditing. The role will focus on developing and applying Large Language Models (LLMs) to detect logic bugs and vulnerabilities in software systems, ensuring the reliability and security of critical software systems.

Key Responsibilities:

• Conducting research on the development of an LLM-based code auditing agent to identify vulnerabilities and improve code quality in software systems.
• Developing tools to identify and analyze the business logic of software applications, ensuring alignment with functional requirements.
• Building and maintaining a comprehensive vulnerability database for software systems, cataloging known issues and patterns for further analysis.
• Writing high quality paper based on results.

Job Requirements:

• Bachelor's degree in computer science, cyber security or related field.
• Familiarity with common software vulnerabilities, static program analysis and large language models.
• Good written and oral communication skills.
• Proficiency in at least one programming languages for static analysis; building LLM-based agent systems.
• Good publication on static program analysis and LLM for security.

We regret to inform that only shortlisted candidates will be notified.

• 5 days, Tuas, Transport provided
• $4000 - $5500 basic salary, AWS, performance bonus
• Allowances, career growth
• Good learning environment

Main Purpose of Role:

Responsible for the installation, commissioning, testing, and servicing of equipment throughout its lifecycle. Ensure the delivery of high-quality, fit-for-purpose equipment and services while meeting client expectations.

Responsibilities:

• Diagnose problems or malfunctions in equipment, assess service requests, and perform technical interventions such as repairs, maintenance, or replacements.
• Carry out commissioning and testing of installations or components in line with project requirements, protocols, and safety regulations.
• Ensure seamless field service operations by handling technical, logistical, and administrative tasks. This includes documentation management, planning, and communication.
• Perform disassembly and assembly of equipment, including physically intensive tasks. Engage in machining activities such as drilling, sawing, or welding.
• Adhere to health and safety standards while ensuring project timelines and goals are met.

Requirements:

• Possess a Degree in Electrical Engineering
• Candidates with minimum 1 year of relevant experience
• Candidates with no experience can apply. On-the-job training is provided
• Prior experience in equipment servicing or manufacturing is an advantage
• Client-oriented mindset, Strong planning and organizational skills
• Progress monitoring and follow-through
• Adaptability in dynamic environments
• Effective problem analysis and resolution
• Self-motivated, team player, and able to work independently
• The role involves physically demanding tasks and may require travelling to client sites

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Responsibilities:

• Prepares engineering information required for the production departments and to execute activities within schedule.
• Coordinates interdisciplinary and subcontracting activities where required.
• Reviews supplier / sub-contractors design deliverables.
• Prepares project documentation for submission and for production works using PLM
• Prepares design and production drawings such as main cable routings, cable tray layout, cable schedules, electrical diagram and etc.)
• Coordinates with other engineering team members (i.e. within shipyard engineering department, production, QC, etc.), subcontractors and consultants on technical issues
• Prepare outfitting material and electrical fittings for vessel to project technical requirement specifications
• Prepares arrangement and bill of material for outfitting and equipment supports for the procurement.
• Provides updates to production and project team members on all aspects engineering deliverables to support yard’s fabrication and installation activities

Requirements:

• Diploma in Electrical or Mechanical Engineering or any other related engineering disciplines
• Minimum 2 years of working experience in Electrical and Instrumentation design and/or engineering in the oil and gas industry
• Experience in electrical related design and marine vessels added advantage
• Proficient in engineering office software and CAD tools such as AVEVA or equivalent
• Able to work overtime where project has requirement.

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

The Digital Supply Chain Group of the Resilient Value Chain Division at ARTC is searching for a Senior Research Engineer to lead and support engineering projects focused on operations research using advanced analytics, simulations, and optimization.

Responsibilities:

Innovate and Develop New Solutions:

Design and prototype novel algorithms, tools, and systems to solve complex operational and industrial challenges.

Conduct research and feasibility studies to create innovative, scalable, and efficient engineering solutions that meet industry needs.

Lead the Development Process:

Lead end-to-end development of research concepts into functional engineering prototypes, ensuring they are industry-ready.

Collaborate with cross-functional teams to transition research results into tangible, deployable products or solutions.

Apply Advanced Research in Engineering:

Leverage cutting-edge technologies such as simulations (discrete-event & agent-based), network analysis, and optimization techniques to develop solutions.

Implement machine learning and AI technologies into operational processes to enhance decision-making capabilities.

Conduct Performance Testing and Optimization:

Evaluate the performance and scalability of developed solutions through testing and optimization.

Continuously improve prototypes by analyzing performance data and making necessary adjustments.

Collaborate with Industry Partners:

Work closely with industry partners to ensure that developed solutions align with real-world applications and requirements.

Engage with stakeholders to gather feedback and refine research prototypes for successful industry adoption.

Job Requirements:

• Bachelor or Master Degree in Engineering, Computer Science, Operations Research, or related fields.
• At least 3 years of experience
• Strong foundation in mathematical modeling, algorithm design, and scientific computing.
• Expertise in simulations (discrete-event, agent-based) and optimization techniques.
• Proficiency in programming languages such as Python, C, C++, or MATLAB.
• Familiarity with machine learning frameworks (e.g., TensorFlow, PyTorch, Scikit-learn) and optimization libraries (e.g., Gurobi, CPLEX).
• Experience in data structures, algorithm development, and software development best practices.
• Prior experience in operational optimization, such as fleet management, scheduling, or network design, is highly preferred.
• Experience applying research in practical settings such as aerospace, logistics, energy, manufacturing, or supply chain management.
• Familiarity with Industry 4.0 technologies such as advanced robotics, automation, or smart manufacturing.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Job Description

We are seeking a dedicated Support Engineer professional to join our team to ensure the smooth operation of our systems and applications. The ideal candidate will have strong technical skills and be able to collaborate with various departments to support and maintain our software systems.

Responsibilities:

Monitor and troubleshoot production issues (Linux VMs, Vendor Product, SFTP).

Collaborate with cross-functional teams to identify and resolve production issues.

Perform root cause analysis and provide solutions to prevent future issues.

Create and maintain documentation related to production issues and resolutions via JIRA.

Implement and maintain processes and procedures to improve production support.

Provide daily, weekly, and monthly reports on system performance and issue status.

Ensure proper deployment and release of software updates & infrastructure patches/upgrades.

Participate in on-call rotation and respond to production issues after business hours. There are two shifts, Morning (7 AM to 4 PM) and Afternoon (2 PM to 11 PM), running 7 days a week.

Deployments during silent hours.

Development work within the vendor product (about 10%-20% of time).

Preferred Qualifications:

Bachelor’s degree in Computer Science or related field.

2–4 years of experience in Production Support or related role.

Strong technical skills in Java, SQL, UNIX, and scripting languages.

Ability to troubleshoot and resolve complex production issues efficiently.

Excellent problem-solving and analytical skills.

Effective communication skills to collaborate with cross-functional teams effectively.

Willingness to participate in on-call rotation.

JOB DESCRIPTION

• CP test program development.
• Work with designer to develop test programs, debug programs, solve problems.
• Work with commissioned factory to identify, propose, prioritize and implement test automations.
• Design automated test scenarios accordingly to test plan with its acceptance criteria
• The commissioned testing factory product management.
• Test plant test plan management. Ex: prepare test environment, test data, update functional test scripts according to changing requirements
• Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency
• Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

• Bachelor’s/ Master’s degree in Electronical Engineering ,Computer Science, Software Engineering or other equivalent degree/experience
• Strong VBT scripting skill and C++ programming background
• Good written and verbal communication skills in English and Mandarin is required to liaise with Chinese associates/clients
• Able to work well both independently as well as in a team
• Singaporeans are welcome to apply

• Marine & Offshore industry
• Basic up to $7k + yearly bonus
• 5 days
• Working location: Jurong area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Electrical Design: Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• System Optimization and Performance Enhancement: Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Documentation and Reporting: Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Regulatory Compliance and Safety: Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.

Requirements

• Min Diploma in Electrical Engineering or related.
• Min 3 years of experience in Electrical Design in Marine/ Automation/ Automotive industry.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for an experience individual to join us as Cloud Infrastructure Engineer (System Administration and ServiceNow)! This will be offered as a contract employment.

You will work as a member of the Service Management and Insights Platform (SMIP) Team, assisting the Lead Engineer in supporting Agile solution delivery and managing key services on the whole-of-government (WOG) platform. The primary focus of this role is the administration and management of the ServiceNow platform, along with responsibilities for maintaining and optimizing other cloud infrastructure components. The ideal candidate will have a strong background in ServiceNow platform administration, cloud infrastructure management, and a passion for ensuring system reliability, security, and scalability.

A brief summary of your job responsibility:

• Manage the overall health and performance of the ServiceNow platform, including upgrades, patches, and maintenance;
• Configure and maintain ServiceNow modules (e.g., ITSM, CSM) to align with business requirements;
• Ensure compliance with governance standards and best practices for the ServiceNow instance;
• Troubleshoot and resolve platform-related issues and incidents;
• Ensure optimal platform operation in terms of availability, capacity, security, and business continuity;
• Maintain and monitor cloud infrastructure components (e.g., AWS, Azure) to ensure high availability and performance;
• Assist in the design and deployment of secure and scalable cloud solutions;
• Implement cloud automation, orchestration, and monitoring tools.
• Troubleshoot and resolve cloud infrastructure issues;
• Document procedures, configurations, and best practices for knowledge sharing;
• Identify opportunities for platform optimization and process automation;
• Recommend and implement enhancements to improve system reliability and efficiency;
• Provide technical expertise and guidance to ensure infrastructure aligns with business goals;
• Collaborate with development teams to support customizations, CI/CD pipelines and integrations
• Ensure project implementation and operations are aligned with Government technology standards and policies;
• Work closely with cross-functional teams, including operations, application development, and business stakeholders and
• Perform any other IT related tasks / duties as and when assigned to support the smooth business operations.

To succeed in this role, you will ideally have:

• Minimum 3 years of hands-on-experience in ServiceNow platform administration;
• Proficient in System Administration (RHEL & Windows), Networks and Cloud Solutions (AWS, Azure);
• Excellent written and verbal communication skills and ability to influence and communicate effectively with non-technical audience and Senior Management.
• Additional skills and knowledge will be an advantage:
• Network, System or Application Administration & Troubleshooting;
• Python Scripting;
• Bash Scripting;
• ServiceNow Certified Implementation Specialist;
• Exposure to On-Premise ServiceNow Deployments
• Cloud Certifications (AWS/Azure);
• DevOps Infrastructure

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience. IInterested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Contract Staff enjoys the same benefits as Permanent Employees.
  

Job descriptions :

• Work on SoC/Subsystem define and integration.
• Work on IP developments, Perform Verilog/System Verilog RTL design to meet product specifications and requirements；
• Work with SW Engineer and HW Engineer on all aspect of SoC to optimise Silicon and board level design;
• Work on SoC system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;
• Work on SoC floorplan with APR and HW Team; SoC timing constraints and review support; SoC DFT support; SoC verification plan and SoC verification support
• Post silicon Debug and support.

Job requirements:

• Bachelor's or Master's degree in electronic engineering with more than 5 years ASIC design experience.
• Experience with ASIC design flow
• Experience in RTL coding, RTL and gate-level simulation, logic synthesis, static timing analysis, timing closure and verification
• Experience in video processing and video analytics is a plus
• Experience in USB/SDMMC/DDR IP is a plus.
• Experience in Functional Safety, automotive certification is a plus.
• Passionate and strong in general programming is a plus
• Good understanding of DFT
• Familiar with UNIX/ Linux environment and scripting
• Good communication and interpersonal skills
• Strong analytical and problem-solving skills
• Professional working with bilinguals in Mandarin is a plus

What we offer:

• Competitive salary package
• Medical insurance (including dental)
• Annual Health Screening
• Company trip & teambuilding activities

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

Responsibilities:

• Prepares engineering information required for the production departments and to execute activities within schedule.
• Coordinates interdisciplinary and subcontracting activities where required.
• Reviews supplier / sub-contractors design deliverables.
• Prepares project documentation for submission and for production works using PLM
• Prepares design and production drawings such as main cable routings, cable tray layout, cable schedules, electrical diagram and etc.)
• Coordinates with other engineering team members (i.e. within shipyard engineering department, production, QC, etc.), subcontractors and consultants on technical issues
• Prepare outfitting material and electrical fittings for vessel to project technical requirement specifications
• Prepares arrangement and bill of material for outfitting and equipment supports for the procurement.
• Provides updates to production and project team members on all aspects engineering deliverables to support yard’s fabrication and installation activities

Requirements:

• Diploma in Electrical or Mechanical Engineering or any other related engineering disciplines
• Minimum 2 years of working experience in Electrical and Instrumentation design and/or engineering in the oil and gas industry
• Experience in electrical related design and marine vessels added advantage
• Proficient in engineering office software and CAD tools such as AVEVA or equivalent
• Able to work overtime where project has requirement.

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm