Job Responsibilities:

• Establishes networking environment by designing system configuration, directing system installation, defining, documenting, and enforcing system standards
• Maximizes network performance and optimization by monitoring performance, troubleshooting network problems and scheduling upgrades when necessary
• Oversee maintenance of all IT system in line with IT security policy
• Secures network system by establishing and enforcing policies, defining and monitoring access
• Ensure project tasks are completed on time and project goals are achieved

Relevant experience:

• 1-2 years of experience in network engineering, administration, or related roles

Basic skills required:

• Diploma / Bachelor degree in IT related field
• Strong understanding of network protocols (Eg: TCP/IP, DNS, DHCP, BGP, OSPF)
• Knowledge on LAN/WAN networking, network design, problem solving, network hardware configuration and project management
• Familiarity with cloud networking (AWS, Azure, Google Cloud) is a plus
• Knowledge of network security best practices and tools
• Excellent problem-solving and analytical skills
• Responsible, resourceful, customer oriented and an independent player

Job Description & Requirements

• Perform general electrical maintenance including troubleshooting and repairing malfunctioning equipment.
• Identify the root cause and conduct analysis to generate solutions.
• Ensure completion of all protective maintenance duties are following the safety standards that complying with company policy.
• Install improvements and major upgrades to process system.
• Provide engineering support in project or plant maintenance
• Alert the Engineer Managers of any unusual incident that have taken place.
• Monitor the equipment process and prevent the equipment breakdown.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Job Requirements:

• Good interpersonal and communication skill
• Work independently
• Attention to details
• Good problem solving and observing skills

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Degree/Diploma in Electrical Engineering or equivalent
• Min 3 years experience in machine tool or automation environment
• Experience in CNC Machinery assembly process and automation will be advantageous
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical engineering or equivalent.
3. Must have valid API 510 and API 570 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Oversee the installation, calibration, and testing of instrumentation and control systems
• Conduct functional and performance tests for instrumentation and control systems
• Identify and troubleshoot issues during commissioning and ensure timely resolution
• Collaborate with engineering and construction teams to ensure seamless integration of systems
• Prepare and maintain accurate documentation and reports related to commissioning activities
• Ensure compliance with safety standards and protocols
• Any other duties to be assigned from time to time

Pre-requsites:

• Bachelor's degree in Electrical, Instrumentation, or a related engineering field.
• Minimum 5 years of experience in commissioning instrumentation and control systems in power plant or industrial projects
• Strong knowledge of control systems, instrumentation and DCS
• Excellent troubleshooting and problem-solving skills
• Ability to work in a team environment and communicate effectively
• Project Location: Jurong Island (Transport will be provided at designated pick-up points)

Purpose: To manage and provide technical support of IT systems and networks, to ensure uninterrupted and secured business operation, and compliance with VDL/ETG standards and roadmap.

Key Area of Responsibilities:

• Maintain and update all information technology (IT) systems, devices and peripherals, within the company to ensure stable and reliable performance.
• Maintain and update the company’s network infrastructure and adhere to the parameters & static address tables according to the One-ETG standard.
• Trouble-shoot and resolve all IT-related technical issues and prevent re-occurrences.
• Ensure security and proper access control of all IT systems, networks and data, so that they are free from malware, spyware, hacking, illegal software and unauthorized access.
• Create regular backups of all relevant company data and store it safely, to ensure Business Continuity, in case of systems and/or network outage.
• Research and benchmark new developments in the IT industry, and propose improvements to business processes to save costs and drive for better efficiency and productivity.
• Source, communicate and manage external parties or service providers that provide service support and maintenance to operational IT matters.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Computer Science/Electrical and Electronic Engineering or other relevant field.
• Minimum 3 years of working as a system support engineer in the semiconductor industry or other similar roles.
• Proficient in Microsoft Excel functions
• Good communication skills

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

Tasks and Responsibilities

• To assist Fire Safety Manager in the implementation of protocols as per Emergency Response Procedure (ERP) to be in line and compliance with Singapore Fire Code requirements.
• To assist Fire Safety Manager in conducting relevant drills as per frequency stipulated by SCDF.
• To enforce on compliance of all Fire safety related legislations and Pollution control matters.
• To develop, plan and conduct training relevant to emergency response scenarios to all relevant staff and contractors within PaxOcean.
• To organise and conduct first aid & rescue related training to all HSE and yard staff.
• To lead appointed CERT members in firefighting, rescue and oil pollution control operations.
• To support in the administration and conduct of all other HSE related training i.e., Safety Induction Program for all staff & subcontractors.
• To be in charge of planning, inspecting, replenishing and maintenance of all emergency response equipment within HSE department Store in accordance manufacturers recommendation and/or industry best practices.
• To support and provide first aid treatment to casualties in times of emergency.
• To ensure that all fire fighting, fire suppression and rescue/ first aid equipment are maintained periodically as per manufacturer’s or Industry best practices.

Job Requirements

• At least 3-5 years of SCDF Experience on Emergency.
• NITEC or higher NITEC or equivalent and above.
• At least 3-5 years of actual front-line emergency response experience including (but not limited to) Firefighting and casualties Rescue, Confined Space Rescue, Work at Height Rescue
• Experience in leading and managing a team of responders for the mentioned emergency scenarios
• Candidates without prior experience are encouraged to apply.

In this role, you will:

• Responsible for machine wiring, troubleshooting, and performing functional checks on electrical systems in prototypes.
• Documenting activities in technical reports and also support for basic mechanical assembly.

Responsibilities:

• Wire prototype machines according to design specifications.
• Identify and troubleshoot electrical issues for prototype machine.
• Perform function check to ensure that the prototype operates as intended.
• Document activities and troubleshooting processes in technical reports.
• Provide supporting basic mechanical assembly

Requirements:

• Diploma in Electrical Engineering or Equivalent
• Able to Interpret electrical schematics, diagrams, and technical documents.
• Independent and ability to diagnose and resolve electrical problems.
• Hands-on experience with machine.
• Good time management, pro-active, self-motivated and high sense of responsibility.

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical engineering or equivalent.
3. Must have valid API 510 and API 570 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience in shell Seraya Singapore.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

Job Title: Sales Engineer
Industry: Marine

Job Summary:

As a Sales Engineer in the Marine Industry, you will be responsible for promoting and selling marine equipment, systems, and solutions to clients within the maritime sector. Your primary focus will be on understanding customer needs, providing technical expertise, and delivering tailored solutions that meet or exceed their requirements. This role requires a blend of technical knowledge, sales skills, and a deep understanding of marine engineering principles.

Responsibilities:

• Client Relationship Management:Build and maintain strong relationships with existing and potential clients in the marine industry.
  Understand client needs, preferences, and requirements to propose appropriate products and solutions.
  
• Technical Expertise:Provide technical guidance and support to clients on marine equipment, systems, and solutions.
  Conduct product presentations, demonstrations, and technical discussions with clients.
  
• Sales and Business Development:Identify new business opportunities and develop strategies to achieve sales targets.
  Prepare and deliver persuasive sales proposals and quotations.
  Negotiate contract terms and conditions with clients.
  
• Market and Product Knowledge:Stay updated on industry trends, market conditions, and competitor activities.
  Conduct market research and analysis to identify potential growth areas and product improvements.
  
• Collaboration:Coordinate with internal teams (engineering, logistics, etc.) to ensure timely delivery and installation of products.
  Work closely with suppliers and partners to leverage their expertise and capabilities.
  
• Documentation and Reporting:Prepare sales reports, forecasts, and other documentation as required.
  Maintain accurate records of sales activities and customer interactions in CRM systems.
  

Requirements:

• Education: Bachelor’s degree in Marine Engineering, Mechanical Engineering, Naval Architecture, or related field. A Master’s degree or additional certifications (e.g., MBA) is a plus.
• Experience:Proven experience (X years) in technical sales or sales engineering within the marine industry.
  Strong understanding of marine equipment, systems, and solutions.
  Experience in dealing with shipyards, shipowners, and marine equipment suppliers.
  
• Skills:Excellent communication and interpersonal skills.
  Ability to explain complex technical information in a clear and concise manner.
  Strong negotiation and presentation skills.
  Proficiency in MS Office Suite and CRM software (e.g., Salesforce).
  
• Personal Attributes:Self-motivated with a results-driven approach.
  Ability to work independently and as part of a team.
  Adaptability to travel domestically and internationally as required.
  

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Responsibilites

• Assist the Project Manager in producing, analysing and accepting design and technical details
• Assist the Project Manager in developing, managing and overseeing a safety management system for projects across the organisation
• Provide Engineering support to project, production and yard staff as directed by Project Manager.
• Provide technical expertise during design activities and reviews.
• Produce technical documentation as required to support daily operations and tendering activities
• Coordinate stakeholder activities during construction phases of projects not limited to clients, suppliers and contractors
• Create and maintain a culture of continuing improvement in safety performance and awareness across teams & work areas
• Execute Project Plan assigned by Project Manager.

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types

A PROCESS AUTOMATION ENGINEERING COMPANY IS LOOKING FOR AN AUTOMATION ENGINEER

REQUIREMENT:

- DIPLOMA / DEGREE IN ELECTRICAL POWER AND CONTROL

- A GOOD KNOWLEDGE AND EXPERIENCE IN PLC PROGRAMMING AND TROUBLESHOOTING

- MIN 5 YEARS OF WORKING EXPERIENCE

JOB DESCRIPTION

- PLC DESIGN / PROGRAMMING

- TROUBLESHOOTING

- TESTING, COMMISSIONING OF EQUIPMENT / MACHINERY FOR FOOD & BEVERAGE, CHEMICAL INDUSTRIES ...

Degree/Diploma in Electrical Engineering or related fields

Must have minimum Two (5) year work experience in the servicing, maintenance and troubleshooting on the Sewage water network, pumping station and reclamation plant with ancillary system.

Responsibilities

· Manage & Lead engineering team

· Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations to as part of the engineering project team

· Team development

· QA/QC documentation review of engineering deliverables

· Liaison with clients, project managers, architects, contractors

· Resolve any technical problems faced during project design and/or construction stages

· Any other required duties as required by the Project Team.

· Candidate who has knowledge in the application of Bentley BIM models and project scheduling software Primavera P6 will be added as an advantage.

As a mechanical engineer, your responsibilities can vary based on the industry and specific role, but they generally include:

1. Design and Development:Create and refine mechanical systems and components using CAD (Computer-Aided Design) software.
   Develop prototypes and test designs to ensure they meet required specifications and performance standards.
   Use engineering principles to solve design problems and improve product functionality.
   
2. Analysis and Testing:Perform simulations and analyses to predict how components will behave under various conditions (e.g., stress, temperature, and load).
   Conduct tests and experiments to validate design concepts and performance.
   
3. Project Management:Plan, coordinate, and oversee engineering projects from conception through completion.
   Manage project timelines, budgets, and resources.
   Collaborate with other engineers, stakeholders, and clients to ensure project objectives are met.
   
4. Manufacturing and Production:Develop and oversee manufacturing processes and procedures.
   Ensure that products are produced efficiently and meet quality standards.
   Work with suppliers and manufacturers to source materials and components.
   
5. Maintenance and Troubleshooting:Monitor and maintain mechanical systems and equipment.
   Diagnose and resolve mechanical issues or failures.
   Implement improvements to enhance reliability and performance.
   
6. Compliance and Documentation:Ensure designs and processes comply with industry standards, regulations, and safety guidelines.
   Prepare detailed documentation, including design specifications, reports, and user manuals.
   
7. Research and Innovation:Stay updated with advancements in mechanical engineering and incorporate new technologies into designs.
   Conduct research to explore new materials, techniques, and systems.
   
8. Collaboration and Communication:Work with cross-functional teams, including electrical engineers, software engineers, and project managers.
   Communicate technical information clearly to non-engineering stakeholders.
   

These responsibilities can vary significantly depending on the specific sector, such as aerospace, automotive, manufacturing, or energy.

Assist Project Manager on project functions included but not limited to project management, risk control management etc.

Prepare, plan, and submit project related documents such as method statements, risk assessments, test reports etc.

Coordinate, attend and supervise a team in daily transmission cable testing and commissioning work.

Ensure works are carried out safely, timely and within specifications.

Ensure quality of work is achieved, complying with best industry practices, and following workplace health and safety requirements.

Coordinate and liaise with main contractor, subcontractors, and site supervisors regarding on-site requirements and progress.

Site management, conduct site surveys and resolve problems on site.

Any other duties that may be assigned.

Requirements

Degree in Electrical Engineering recognised by Professional Engineers Board Singapore. Entry level welcome to apply.

Passion in Electrical Engineering and eager to start their career in the industry.

Good oral and written communication skills.

A team player with a positive working attitude and the ability to handle tight deadlines.

Proactive and flexible, able to work on site.

• Class 3 driving licence.

Job Description:

- Assist HOD and supervise a team of technicians in delivering technical advices/ support to the various business units

- Actively involved in job estimation and WIP (Work-In-Progress) tracking

- Read Manual and Engineering Drawing for any re-engineering work required

- Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems

- Manage and supervise the MRO tasks allocated to the section in supporting commercial products, company's proprietary and non-proprietary Army products

- Deliver allocated and ad-hoc tasks within stipulated timeline and cost

- Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost

- Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches, studies and make necessary recommendations

- Submit investigation reports to relevant authority for approval

- Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained

- Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components

- Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible

- Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts

- Perform other related duties as assigned

Job Requirements:

- Degree in Mechanical/Mechatronic Engineering

- Experience in Component MRO in related industries

- Experience in effectively leading a team of Technicians

- Experience in SAP System is advantageous

- Knowledge in Army systems will be an added advantage

- Ability to read and interpret schematics and datasheets

- Strong technical skills in troubleshooting Engine, Transmission or Gearboxes

- Competent in Mechanical/Mechatronic system

- Familiar with components testing

- Ability to read and interpret Engineering Drawing and datasheets

- Good communication skills and a strong team player

- Able to work under pressure and tight timeline

- Good analytical and problem-solving skill

• Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement)
• Design systems and components that meet needs and requirements
• Produce outline designs
• Conduct experiments methodically, analyse data and interpret results
• Test and evaluate theoretical designs
• Identify, formulate and produce effective solutions to emerging problems
• Evaluate final product’s overall performance, reliability and safety
• Alter and modify design to meet requirements and to eliminate malfunctions
• Estimate budget and scope of project
• Solicit observations from operators
• Prepare product reports and documentation
• Engage in lifelong learning and develop new theories or methods

Roles & Responsibilities

Official working hours: 5 Days

Salary: Basic $3000 - $5000 plus Overtime

Working location: Tuas or Site

• To carry out inspection, troubleshooting & repair of marine equipment such as hatch cover, winches and crane on site.
• To carry overhauling of marine equipment or components in workshop, such as winches, cylinders , motor.

Requirements

We are looking for an experienced Hydraulic/Mechanical Service Engineer who capable to work in marine industry.

• Nitec, Diploma or Degree in Mechanical or Electrical Engineering or equivalent
• At least 1 years working experience in Mechanical, Hydraulic, Electrical, Marine, or heavy engineering Industry. Preferably with service and troubleshooting skill.
• Capable in mechanical and hydraulic and mechanical troubleshooting.
• Good coordination skill and capable to supervise repair team at shipyard and during vessel repair.
• Positive attitude and able to work under pressure to complete work within timeframe.
• Eager to learn and good team player.
• Capable to prepare service reports and able to communicate well with colleague, customer and contractor.
• Willing to work overtime and travel overseas for short period.

Job Scope

The Process Engineer applies engineering principles and techniques to optimise the production processes in a manufacturing environment to meet organisational objectives. His/her work also includes troubleshooting process engineering issues and developing work instructions for out-of-control processes. He/she will be required to analyse manufacturing/maintenance issues and recommend engineering solutions.

In addition, the Process Engineer leads production and manufacturing systems improvement projects and is expected to develop operation plans per organisational objectives. He/she would also be required to ensure compliance with workplace safety, health and other regulatory requirements in his/her line.

The Process Engineer is required to have strong communication skills to collaborate with the production and maintenance team to meet organisational outcomes.

The process engineer will report directly to the Managing Director and Plant Manager.

Tasks

• Adopt new technologies to improve process monitoring.
• Develop work instruction and control plan.
• Enforce compliance with safety and good manufacturing practices and processes in production areas.
• Implement network solutions for production improvement.
• Investigate Out of Control (OOC) and improve the Process Capability (cpk).
• Investigate the root cause of process failures.
• Lead continuous improvement projects.
• Lead working level community exploring opportunities for improvement projects.
• Maintain quality assurance system.
• Manage manufacturing processes using statistical modelling.
• Monitor process performance data to establish good control parameters.
• Review the abnormality report.
• Troubleshoot process engineering issues.
• Conduct technical presentations to management and peers.
• Perform training.

Qualification and Experience

· At least a diploma or degree in Electrical, Mechanical or Process Engineering.

· At least 3 to 4 years of work experience in the Electromechanical Industries as a process technician or associate engineer.

· Candidates with the following experience will be an advantage

o Recycling or refining industries (Incinerator, Crushing, Melting, Plating, etc)

o Project Management

· A team player to work alongside with peers

· Willingness to attend certain courses/licences such as Hazardous Materials Transport Driver (HMDR), WSH Work at Height etc on behalf of the company

· Willing to travel occasionally if required

· Any other duties and job scopes that may be assigned by the Managing Director/Plant Manager

· Class 3 driving licence (mandatory)

Benefits Highlights

• 5 working days, regular working hours, work life balance
• AWS, variable bonus and yearly increment
• Good staff benefits with insurances, dental & medical benefits
• Daily transport and tea allowances
• Lunch provided