Responsibilities

• Work as Senior Tankage Design Engineers to execute the Tankage Design Engineering of

the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650,

Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII &

Cryogenic Double Wall Tanks as per API 620 & API 625.

• Preparation, Review & Checking of Tankage Design Documents such as Design Calculation

for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification,

Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME

Sec VIII, AP 2000 and all Applicable Codes & Standards.

• Prepare all Tankage documents in accordance with project specification. Maintain Design

integrity and quality within the Project Engineering Team

• Preparing Engineering schedule and Engineering man hours estimation to meet project

requirements.

• Coordination with PMC and Construction Coordination.

• Participates in discipline and inter-discipline design check and screening meetings for

compatibility, completeness and correctness in works.

• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

• Preparation of Technical Specification for Works and Technical Bid Evaluation

• Technical assistance to construction activities and attending to Site Queries.

• Preparation of Foundation Loading Data.

• Generate 2D construction drawings and data sheet.

• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system,

aluminium dome roof & etc. Preparing technical bid evaluation for item purchased.

Checking vendor’s calculation & construction drawings.

• Checking of construction drawings. Preparation of bill of material for purchasing.

• Preparation of technical queries to client base on design deviation.

• To be proactive in creating a safe working environment for everyone and ensuring that HSE

in-house rules are observed at all times.

• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce

HSE hazards, aspects and risks.

• Any additional Adhoc related work

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Min. 10 years’ experience in oil and gas.

Software Requirements

• Autocad

• Good proficiency in MS Excel , MS word

Code Knowledge

• API 650/ API 620

• ASME Section VIII D1 & D2

• ASME Section II Part A & D

• ASTM

• NFPA

Job Duties and Responsibilities:

• Integrate and commission a variety of instrumentation and control systems for commercial projects.
• Program and integrate control systems, design control panels and subpanels, and generate I/O lists.
• Perform engineering tasks, including PLC and SCADA software interface programming.
• Develop process functional designs, including control write-ups and control schematics.
• Create hardware and software design specifications, as well as other software/test documentation.
• Diagnose and resolve issues in electrical, instrumentation, and control systems.
• Manage multiple tasks effectively, work under pressure, and meet tight deadlines to ensure timely completion of commissioning activities.

Job Requirements:

• Proven experience in PLC control program design and implementation within industrial or marine automation, or process automation settings.
• Strong technical knowledge and hands-on programming skills with various PLC brands.
• Proficient in technical knowledge and programming of SCADA software.
• Resourceful and highly organized, with excellent time management and problem-solving skills.
• A collaborative team player who can also work independently in a fast-paced environment.

Responsibilites

• Assist the Project Manager in producing, analysing and accepting design and technical details
• Assist the Project Manager in developing, managing and overseeing a safety management system for projects across the organisation
• Provide Engineering support to project, production and yard staff as directed by Project Manager.
• Provide technical expertise during design activities and reviews.
• Produce technical documentation as required to support daily operations and tendering activities
• Coordinate stakeholder activities during construction phases of projects not limited to clients, suppliers and contractors
• Create and maintain a culture of continuing improvement in safety performance and awareness across teams & work areas
• Execute Project Plan assigned by Project Manager.

Roles & Responsibilities

• Reports to Construction Manager.
• To assist in site supervision works.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination,supervision & monitoring the progress of the project works on site,manpower mobilization, materials planning & ordering.
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Assist in the preparation of the project schedule and coordinate for all submission.
• Responsible for the quality inspection of the bridge structure.
• Produce weekly site progress report and necessary submission.
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Ensure all legal requirements under Singapore laws are compiled and ensure all standard operating procedures comply with specifications quality standards statutory and regulatory requirements.

Job Requirements:

• Degree in Civil Engineering/relevant studied recognized by PE Board, BCA or IES registered Resident Engineer (RE).
• Minimum 5 years’ working experiences in marine sector.
• Familiar with costing, contract, regulations and building operations.
• Oversee all site projects operations, functions, and requirements.
• Able to handle AutoCAD or relevant drawings submission.
• Required skill(s): MS Office, M.S. Project, AutoCAD.

Job Duties and Responsibilities:

• Provide technical support to resolve technical inquiries from ships/vessels on Nordic Systems.

• Attend on-board service attendances and commissioning services, annual inspection and maintenance for vessels based on troubleshoot of the technical issues and feedback by chief engineer/vessel managers.

• Review service reports, customer technical specifications and provide support to sales team for bidding of spares.

• Troubleshoot issues involving electrical/electronic control systems, PLC products.

• Read and understand manuals, schematics, and P&ID's.

• Lead the preparation and coordination of ITRs based on approved electrical completion procedures.

• Prepare and update status of punch list and ensure all cleared punch items to be acknowledged by the client reps.

• Monitor and manipulate site execution in line with sequence of works.

• Handle technical issues, drawings, reports, procedures and any other relevant documents.

• Develop engineering capabilities and work with sales team on project proposal and bidding.

• Selection of equipment, materials for instrumentation and controls.

• Execution of projects.

• Plan and carry out E&I maintenances

• Manage Subcon and other adhoc activities, lead the team of technicians on site to execute the project.

Job Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic) or equivalent.

• Prior experience in the Maritime/Oil & Gas industries and shipyards will be highly advantageous.

• Excellent verbal and written communication.

• Possess excellent interpersonal and communication skills.

• Responsible, Meticulous and able to work under pressure.

• Proficient with Microsoft Office Applications (Outlook, Word, Excel, Power Point, etc).

• Experienced in PLC/SCADA systems.

• Fluency in English (verbal and written) is essential.

• Collaborate with engineers, architects etc. to determine the specifications of the project
• Negotiate contracts with external vendors to reach profitable agreements
• Obtain permit and licenses from appropriate authorities
• Determine needed resources (manpower, equipment and materials) from start to finish with attention to budgetary limitations.
• Plan all construction operations and schedule intermediate phases to ensure deadlines will be met
• Acquire equipment and materials and monitor stocks to timely handle inadequacies
• Supervise the work of laborers, mechanics etc. and give them guidance when needed
• Evaluate progress and prepare detailed reports
• Ensure adherence to all health and safety standards and report issues
• Materials quantity take off , Drafting works if necessary

Job Requirements:

• Proven experience as Project Manager
• In-depth understanding of construction procedures and material and project management principles
• Familiarity with quality and health and safety standards
• Outstanding communications and negotiation skills
• Able to use Microsoft office , microsoft project , autocad , revit , naviswork and other engineering softwares skillfully.
• Excellent organizational and time-management skills
• A team player with leadership abilities
• Advances time management and analytical skills
• Excellent client-facing communication skills
• Candidate must possess at least BSc/BA in Engineering Civil) or Engineering (Metal Fabrication/Tool & Die/Welding) or relevant field (Degree is recognized by BCA will be an advantage)
• 5 years' experience in Project Management (Metal Works)
• Able to liaise with Chinese client

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We work with organizations to protect them from cyber threats. We help detect new unknown cyber threats through research, fortify networks, and defend critical information infrastructures. Our team consists of cybersecurity experts who use the advanced techniques and technologies to deliver cutting-edge solutions and services.

Responsibilities:

• Develop, refine, and implement cutting-edge algorithms for product research and development or solutions utilizing ensemble or artificial intelligence model workflows.
• Construct APIs to deploy models as microservices/containers.
• Lead architectural and technical design, prototyping, development, and reviews of complex data and algorithmic pipelines.
• Engage in communication and negotiation of technical and analytical solutions, as well as architectural designs, with a diverse range of stakeholders.
• Stay updated on advancements in data science.
• Produce comprehensive technical documentation.

Requirements:

• Strong understanding of machine learning, deep learning, and data science with some hands on experience.
• Proficiency in Python programming language and frameworks such as PyTorch and TensorFlow.
• Excellent problem-solving skills and ability to work in a fast-paced environment.
• Strong communication skills and ability to collaborate effectively with cross-functional teams.
• Proven ability to adapt to new technologies and learn quickly.
• Work location: near Jurong East MRT

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Service, repairs, maintenance of Marine Electronics Systems on board the vessel including but not limited to Communication, Navigation and Bridge equipment.

Responsible for turn-key implementation of On-board Marine projects including Planning, Installation, Testing and Commissioning of Navigation and Communications systems such as: Radar systems, GMDSS stations, Gyro compass, Autopilots, BNWAS, Satellite TV systems, CCTV systems, Echo sounders, Speed logs, AIS, SSAS, Inmarsat terminals, ECDIS, SVDR, etc.

Strong service field orientation with a proven, demonstrable track record of having completed on-board installations, repairs and servicing of Radar`s, Gyro`s, Echo sounders, Speed logs, GMDSS equipment, Inmarsat terminals, Satellite TV systems, BNWAS, ECDIS, SVDR`s, AIS, LRIT, VTMS, VSAT, etc.

Pleasing personality, good interpersonal and communication skills.

An ability and willingness to adapt to on-shore installations and project execution (and pre-sales related activities, as required).

Ability to work independently or as a part of a team.

Ability to execute maintenance contract.

Ability to execute projects in time bound manner, within the allocated budget and resources.

Skills in computer hardware, networking and software are essential.

Position Summary:

To be expertise with complete technical knoweldge on troubleshooting, modification and new design for marine and offshore equipment control system & pannel wiring - Cranes, Winches, Hydraulic Power Packs.

Responsibilities:

1. Take full responsiblity from customer enquiry to project completion including all commercial and technical.
2. Lead team on electrical jobs.
3. To prepare electrical Schematics diagram (Single line or Electrical Block Diagram).
4. Design and hands on cable Termination.
5. Equipment technical Specification based on owner’s requirement, Classification bodies, and all relevant authorities.
6. Prepare document for shipyard repairs.
7. Travel overseas on short notice for offshore and marine jobs.
8. Basic knowledge on PLC programming
9. Coordinate with hydraulic team on troubleshooting and rectifications.

Job Requirements:

Minimum 4 to 6 Years on offshore and marine equipments

Working at shipyard environment

Familiar with Microsoft Office

English fluency and report writting skills.

Class 3 driving licence

Job Summary:

• Salary range: Up to $9000
• Working Days and Hours: Monday - Friday (9am to 5pm)
• Location: Bugis/Taiseng/Paya Lebar
• Benefits: Performance Bonus, Hybrid work arrangement, AL

Job Responsibilities:

• Lead the technical implementation of AppDynamics solutions, translating solution architecture into actionable technical plans.
• Collaborate with the customer’s technical teams and stakeholders, understanding their environment and aligning deliverables with business objectives.
• Work with AppDynamics R&D and Customer Support to address product feedback engagement-specific support issues, and improvement opportunities.
• Provide technical mentorship and guidance to junior team members, fostering a collaborative learning environment.
• Communicate effectively with customers to gather requirements, set expectations, and propose relevant technical solutions.
  
  Requirements:
• Bachelor’s degree in Computer Science or related field required; Master’s degree preferred, or equivalent work experience.
• AppDynamics Certified Associate Administrator (ACAA)
• AppDynamics Certified Associate Performance Analyst (ACAPA)
• AppDynamics Certified Implementation Professional (ACIP)
• Preferred: ITIL, TOGAF certifications
• Hands-on programming experience

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON,

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Foo Kai Jing (Fiona)

Registration Number: R2199329

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Roles & Responsibilities

The Service Engineer will be responsible for the installation, maintenance, and repair of various types of construction equipment. This role requires advanced technical expertise, problem-solving skills, and a strong understanding of safety protocols. The ideal candidate will provide exceptional customer service and ensure that all work is completed to the highest industry standards.

**Key Responsibilities:**

- **Installation and Commissioning:**

- Perform installation and commissioning of associated equipment at customer sites.

- Conduct thorough testing and calibration to ensure proper functionality.

- **Maintenance and Repairs:**

- Perform preventive maintenance, diagnostics, and repairs on a wide range of construction equipment.

- Troubleshoot complex mechanical, electrical issues.

- **Technical Support:**

- Provide technical support and training to customers..

- Assist in the development of maintenance schedules and service documentation.

- **Safety and Compliance:**

- Adhere to all health and safety regulations and ensure compliance with industry standards.

- Conduct safety audits and risk assessments as required.

- **Customer Service:**

- Establish and maintain strong relationships with customers through effective communication and excellent service delivery.

- Address and resolve customer inquiries and complaints in a timely manner.

- **Continuous Improvement:**

- Stay up-to-date with the latest industry trends, technologies, and best practices.

- Identify opportunities for process improvements and implement changes to enhance service quality and efficiency.

**Qualifications:**

- Diploma or degree in Mechanical Engineering, Electrical Engineering, or a related field.

- Minimum of 2 years of experience in service engineering or a related field.

- Extensive knowledge of mechanical, electrical systems.

- Proficiency with diagnostic tools and software.

- Strong problem-solving skills and attention to detail.

- Excellent communication and interpersonal skills.

- Ability to work independently and in a team-oriented environment.

- Valid driver’s license and willingness to travel to various job sites.

• Collaborate with engineers, architects etc. to determine the specifications of the project
• Negotiate contracts with external vendors to reach profitable agreements
• Obtain permit and licenses from appropriate authorities
• Determine needed resources (manpower, equipment and materials) from start to finish with attention to budgetary limitations.
• Plan all construction operations and schedule intermediate phases to ensure deadlines will be met
• Acquire equipment and materials and monitor stocks to timely handle inadequacies
• Supervise the work of laborers, mechanics etc. and give them guidance when needed
• Evaluate progress and prepare detailed reports
• Ensure adherence to all health and safety standards and report issues
• Materials quantity take off , Drafting works if necessary

Job Requirements:

• Proven experience as Project Manager
• In-depth understanding of construction procedures and material and project management principles
• Familiarity with quality and health and safety standards
• Outstanding communications and negotiation skills
• Able to use Microsoft office , microsoft project , autocad , revit , naviswork and other engineering softwares skillfully.
• Excellent organizational and time-management skills
• A team player with leadership abilities
• Advances time management and analytical skills
• Excellent client-facing communication skills
• Candidate must possess at least BSc/BA in Engineering Civil) or Engineering (Metal Fabrication/Tool & Die/Welding) or relevant field (Degree is recognized by BCA will be an advantage)
• 5 years' experience in Project Management (Metal Works)
• Able to liaise with Chinese client

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$3500

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$3500

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer

Internal Code: A24013

What will you do?

• We develop the Smart Nation infrastructure and applications and facilitate collaboration with citizens and businesses to co-develop technologies.
• Join us as we support Singapore's vision of building a Smart Nation - a nation of possibilities empowered through info-communications technology and related engineering.
• Our objective is to catapult our government infrastructure into the new digital era with faster time to market, operational agility, automated deployment and scalability.
• We are an agile development and operations house that is bold, agile and collaborative.
• The team is responsible for designing, prototyping, building and operating different products and services.
• As a Software Engineer (frontend), you will help to level up the team's competency with your valuable past experiences.
• Experiences of failure are just as important as those of success.
• You will drive, implement, deploy, maintain and operate products or key components of your products. You will work closely with different teams to deliver the best possible and impactful solutions.
• If you are looking for opportunities to collaborate with leading industry experts and be surrounded by highly motivated and talented peers, we welcome you to join our team. Make a difference by taking up the key role and be part of the passionate and inspirational team.
• Ownership over feature design and implementation, with a focus on sound technical choices and maintainability. At times, this would be in collaboration with other software engineers.

What are we looking for?

• From 3 - 5 years of relevant experience
• Proficient in JavaScript, TypeScript
• Experience in frontend technologies (HTML & CSS etc) as well as any web framework (React Preferred), understand their design principles and application scenarios; and have good practise and understanding of common web compilation and bundling frameworks, including Webpack/Rollup/Babel/AST.
• Familiar with various front-end related debugging and testing tools, and have independent problem-solving skills
• Contribute in technical discussions and solutioning sessions.
• Possess good coding and documentation habits, pay attention to code style, familiar with basic design patterns and principles, and continuously focus and optimize projects
• Autonomy to drive the direction of the product
• Chance to work on creating developer tooling systems from the ground up, from research all the way to implementation.
• Chance to work with different development teams while enabling them to be more productive at the same time
• Excellent teamwork and communication skills; communicating technically complex ideas to non-technical people effectively is a plus
• Having a growth mindset and willing to share knowledge to grow together with the team
• Enjoy making data driven decisions
• Understand that problems can be solved in different ways, sometimes not with engineering; understand how these solutions can and should be evaluated.
• Willing to learn and own fullstack

If would be a plus if you have:

• Experience in fullstack or backend JavaScript (Node.js)/TypeScript or other backend frameworks
• Experience with automated testing
• Experience with deployments cloud infrastructure such as AWS, Azure, or Google Cloud
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

1. Preparing the project reports and guidelines as per the instructions of higher authorities.
2. Assisting senior engineers in conducting research, designing systems, and analyzing data of specific projects.
3. Identify the problems of execution of project and solve them using engineering principles.
4. Maintaining equipment and inventories of the organization.
5. Collaborating with co-workers to meet the goals of projects.
6. Ensure testing and quality control processes of the products.
7. Stay familiar with the advancement in technologies to develop the highly demandable skills.
8. Following safety guidelines and engineering parameters to executive the project tasks.
9. Participating in learning and development sessions to gain expertise.

Job Responsibilities:

1. Update CMS database checklists based on the latest engineering drawings and punch lists for mechanical/electrical processes, safety, and HVAC disciplines, and assign tasks accordingly.
2. Prepare boundary drawings to support subsystem listings.
3. Develop procedures, method statements, and risk assessments for commissioning activities.
4. Attend supplier Factory Acceptance Tests (FAT) as required.
5. Lead a team of mechanical/electrical technicians and mechanics to perform on-site preparation and execution, liaising with all parties, including supplier representatives, to resolve issues promptly.
6. Be adaptable to overseas travel and prepare the required documentation.

Candidate Requirements:

1. Relate experience in commissioning within the oil & gas or marine industry required.
2. Hands-on experience in commissioning diesel generators, compressors, pumps, piping systems, packaged equipment, cranes, mechanical handling equipment, HVAC, etc.
3. Familiar with work permit systems, lock-out tag-out (LOTO) procedures, and project specifications, technical, and HSE standards.
4. Experience with completion management system databases such as PIMS-CMS, WinPCS, ProCoSys, or ICAPS is a plus.

Benefits:

1. Annual Leave: 7 days in the first year, increases by 1 day annually, up to 14 days.
2. Medical Leave: 14 days per year.
3. Bonus: Based on performance.
4. Transportation provided (shuttle service available). Accommodation is located in Singapore.

Key Responsibilities:

• Install GT Power & Distribution Transformers, HT & LV Switchgear, and substation equipment.
• Oversee material planning, cable tray/support installation, and project coordination.
• Lead testing & commissioning of electrical systems.
• Perform quantity surveying and ensure quality assurance/control.
• Manage electrical project timelines and budgets.
• Coordinate with other service providers to ensure smooth site installations

Requirements:

• Minimum 7 years experience in electrical engineering, ideally in the semiconductor industry.
• Proven expertise in electrical system installation and project management.
• Strong skills in material planning, quantity surveying, and quality control.
• Bachelor's degree in Electrical Engineering or related field.

Job Summary:

We are seeking a highly skilled Marine Structural Analysis Engineer to join our team. The successful candidate will be responsible for performing detailed structural analyses and design evaluations for various marine structures, ensuring safety, reliability, and compliance with industry standards and regulations.

Key Responsibilities:

• Perform structural analysis and design of marine structures including ships, offshore platforms, and subsea installations.
• Utilize advanced finite element analysis (FEA) tools and software to conduct stress, fatigue, and dynamic analyses.
• Develop and validate structural models to simulate and predict performance under various loading conditions.
• Collaborate with multidisciplinary teams to integrate structural analysis results into overall project designs.
• Prepare detailed technical reports, design documentation, and presentations for stakeholders.
• Ensure compliance with relevant industry codes, standards, and regulatory requirements.
• Participate in design reviews, risk assessments, and failure mode analysis.
• Provide technical support during the construction, installation, and operational phases of projects.
• Stay updated with the latest advancements in marine structural engineering and analysis methodologies.

Qualifications:

• Bachelor’s or Master’s degree in Civil Engineering, Structural Engineering, Naval Architecture, or a related field.
• Proven experience in structural analysis and design of marine structures.
• Proficiency in using FEA software such as ANSYS, ABAQUS, or equivalent.
• Strong understanding of marine structural codes and standards (e.g., DNV GL, ABS, ISO).
• Excellent analytical, problem-solving, and decision-making skills.
• Strong communication skills, both written and verbal, with the ability to present complex technical information clearly.
• Ability to work effectively in a team environment and manage multiple projects simultaneously.
• Professional Engineer (PE) license or Chartered Engineer (CEng) status is preferred but not required.

Preferred Skills:

• Experience with structural analysis of offshore wind turbines, oil & gas platforms, and subsea structures and marine vessels.
• Familiarity with software tools such as MATLAB, Python, or other programming languages for custom analysis and automation.
• Knowledge of marine construction techniques and materials.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional development and career advancement.
• A dynamic and collaborative work environment.
• The chance to work on innovative and challenging projects in the marine industry.

Responsibilities:

Prepare Electrical and Instrumentation design documents including:

• Lighting design and calculation.
• Preparation of lighting layout 2D and 3D drawings, Lighting circuit diagram.
• Earthing and Lightning Protection design and drafting of layout, section, and elevation drawings.
• Cable ladder, conduit, trunking, cable routing design. Preparation of 2D and 3D design drawings.
• Cable sizing calculation, prepare Electrical cable schedule
• Prepare material take off (MTO) for material purchase.
• Fire Alarm, CCTV, Card Access, Public Addressing system design, preparation of system schematic and Layout drawings 2D and 3D.
• Preparation of Instrument Location layout drawing
• Preparation of Junction box termination drawings, Instrument Loop diagram
• Preparation of instrument Hook up, typical installation details
• Preparation of instrument cable schedule

Design coordination with internal design disciplines such as Structure, mechanical, piping team for design interface issue

Attend 3D model review and coordination with internal discipline engineers to resolves clashes.

Attend site survey and provide design sketches such as cable routing, support installation details, etc.

Support project tender team for material take-off from client tender documents.

Attend factory inspection for E&I related material such as Fire alarm, CCTV, MCC, PLC system

Support construction site to raise material purchase request, evaluation vendor quotation, preparation of Material approval submission.

Support site testing & commissioning work such as fire alarm system, CCTV System, DCS loop check, etc.

Requirements:

• Minimum Diploma in Electrical or Electronics Engineering.
• 3~5 Year of relevant design experiences
• Fresh graduates are welcome to apply
• Minimum hands-on experience for using design software such as AutoCAD MEP (Electrical), AutoCAD Plant 3D, Navisworks Manage, DIALux.

• Servicing experience on Marine and Offshore deck equipment.
• Intensive knowledge on hydraulic system troubleshooting.
• Hydraulic system modification.
• Knowledge on Low pressure system service and troubleshooting.
• Min knowledge on electical control system and fault finding.
• Service / Troublshoot / Repairing knowledge on marine and offshore cranes and winches.
• Communication / Report writting skills.
• Overseas travel on short notice.
• Attending ship repair meeting / apply permit / Preparation of shipyard entery documents.
• As a team leader.
• Participate in vessel dockings repair work at shipyards.
• Adhoc duties as assigned