In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

WHAT YOU WILL DO:

Cost Transformation and Energy Management

● Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.

● Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.

● Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program

● Support the computerized energy monitoring system for the site to drive efficiency and sustainability

● Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.

● Provide expertise in conducting energy audit, evaluating options and providing solutions

● Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation

● Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts

● Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

● Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate

● Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets

● Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

● Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology

● Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations

● Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site

● Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.

● Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

● Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan

● Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels

● Ensure projects are timely, on budget and completed in compliance to safety and quality

● Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

Technical Competencies

● Advance in Energy Conservation Technologies, Proven Energy Savings Program, Standards and Benchmarking.

● Advance in the practical application of theoretical engineering knowledge

● Advance in the development and monitoring of engineering budgets

● Advance in planning of engineering and non-engineering activities in support of role

● Advance in the principles and application of risk based decision

● Consistently applies and promote LSS, MPS and change management tools

SHE

● Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards

● Seek opportunities to improve company SHE standards and move company towards goal on injury free work place & better environment

cGMP Standards

● Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards

● Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions

● Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance

● Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Problem Solving

● Demonstrate creativity, maturity and foresight in providing solutions which are highly innovative, practical for implementation and may have strategic impact

● Lead cross-functional teams in the evaluation and resolution of complex problems with potential impact across business units and demonstrates ability to make rapid rational decisions under pressure

ACCOUNTABILITIES

● Undertakes activities to realize cost reduction, energy reduction or continuous improvement projects to be on time, on budget and to meet compliance requirements

● Effectively implements the Performance Management Process (PMP), ensures that objectives are developed, provides timely continuous feedback to direct reports, and appropriately rewards team members based on performance and demonstration of our leadership standards

● Implement effectively any tasks or projects as assigned by Supervisor as prioritized by business need.

WHAT YOU MUST HAVE

● Engineering Degree or equivalent

● Singapore Certified Energy Manager (preferable)

● Advance degree, such as Masters, would be a plus

● Work experience required with 5-20 years’ experience in engineering, manufacturing, consultancy or equivalent industry

● Demonstrate leadership behavior in alignment with our leadership standards

Functional Competencies

● Demonstrated project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.

● Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance and calibration.

● Demonstrated capability in vendor service contracts management.

● Demonstrated knowledge of our System Life Cycle Methodology.

● Understands maintenance programs and requirements (reliability-centered, preventative, predictive).

● Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

● Demonstrated capability in the application of appropriate trouble-shooting and problem solving techniques.

● Effective communication skills, ability to lead cross-functional teams.

● Performance planning: objectives setting, metrics, action plan, reviews and performance management.

● Understands the site value stream and is customer focused.

Provide technical expertise, improvement recommendations and guidance in support of the manufacturing process. Work to improve the performance and efficiency of existing machine. Plan projects or subtasks that may be tracked and presented.

Responsibilities :

• Gather, analyse and summaries production process data for their use in valuing and prioritising process continuous improvement opportunities; utilise continuous improvement methodologies to lead, implement, and track improvements and to conduct check and adjust activities with the objective to reduce wastes while striving for efficiency and profitability.

• Work with cross-functional personnel to analyse and solve production flow issues stemming from sequence of work, balance of tasks, tooling/equipment constraints, and manpower allocation/training.

• Analyse and makes recommendations regarding production facility arrangements for improvements to production capacity, manufacturing flow, new model incorporation, and strategic work transitions.

• Identify, justify and implement new technology and manufacturing techniques to improve safety/ergonomics, reduce manufacturing cost (Labour, material, inventory, scrap) and improve product/process quality.

• To develop and implement an Energy program to prevent waste/reduce utility consumption.

• Support the needs of the plant by participating in all strategic initiatives.

• Control of Bill of Materials (BoM), CAD Models and Engineering Drawings.

• Participate in overseas project management team by the provision of engineering and technical expertise in the design and installation of new plant design and production lines. This includes the designing, installing/constructing and commission new production plant, monitoring development.

• Develop, implement and manages all maintenance procedures to ensure all engineering and maintenance goals are met.

• Ensure the Maintenance Department supports the needs of production and keeps all production equipment in proper working condition.

• Write reports and present progress at project meetings.

• Ensure plant equipment and processes are in compliance with all regulatory requirements including WSH, environmental, health and emissions.

• Responsible for completing technical work assignments with direction and Supervision.

• Responsible for reporting and taking any necessary action to prevent food safety and food quality problems from occurring.

• Responsible for following and enforcing procedures outlined in the HACCP & Quality Plan under the ISO & ISO Management Systems.

• Perform other related duties as assigned by superior.

Requirements :

· Diploma in any Engineering / Project Management related discipline.

- Fresh Graduates are welcome.

· Proactive team player and technically motivated to solve problems, innovate and deliver to internal and external customers.

· Possess strong written and communication skills.

Job Highlights:

• company transport provided
• Meal provided

Job Description

Key Responsibilities

• Design or modify electrical/electronic engineering assemblies, layouts/schematics and/or detailed drawings/specifications of moderate scope under general supervision
• Perform basic engineering analysis under general supervision
• Perform and generate basic engineering test reports under general supervision
• Generate related alpha/gamma documentation for product release
• Coordinate the procurement and assembly of electrical/electronic components/equipment and identify sources of critical parts and subsystems to resolve technical issues
• Troubleshoot a variety of moderately complex electrical problems
• Implement concepts for product issues and electrical solutions of moderate difficulty
• Assist in development of electrical product specifications

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Job Responsibilities

• Basic troubleshooting, installation, calibration, maintenance and repair on designated equipment.
• Completing Preventative Maintenance/Calibration reports
• Keeping up to date on administrative responsibilities such as maintaining customer service logs and internal service records in a timely manner.
• Maintaining daily communications with customers to ensure resolution and proper follow-up.
• Utilising the escalation process to resolve customer service delivery issues.
• Identifying and participating in sales opportunities such as new contracts or contract renewals
• Working as a member of the local team to provide efficient service delivery to all accounts within the assigned area.

Qualifications & Requirements

• Candidate should be Electrical /Electronic/ Mechanical trained with qualifications from polytechnics or relevant institutions.
• Possess some basic IT related experience.
• Possess minimum 2 years of relevant working experience/ Candidates with limited working experience will also be considered.
• Experience in troubleshooting and responding to customer concerns.
• Should have basic level of computer skills including MS Word, PowerPoint, Excel and Outlook
• Candidates are required to perform outdoor servicing of equipment and work in warm/humid environment.

Job Summary

We are seeking a skilled and driven Software Engineer to join our team and contribute to the design, development, and integration of cutting-edge software solutions using Microsoft technologies.

Mandatory Skill-set

• Diploma or Degree in Computer Science or Engineering or Information Systems;
• At least 3 years of experience in C# .NET Development, design, implementation, and quality assurance;
• Proficient in using DotNet, ASP.Net, C#, Microservices, XML, SOAP, RESTful APIs;
• Familiarity with tools like SonarQube for code quality monitoring;
• Hands-on experience with Milestone VMS and MIP SDK;
• Good understanding open-source media players i.e. VLC Player, OpenCV and Linux/Windows OS shell scripting;
• Understanding of SOAP, Webservices, and API versioning strategies;
• Good knowledge in Object Oriented Analysis and Design, Net technologies and tools;
• Excellent communication and interpersonal skills, with the ability to explain technical concepts to non-technical users;
• Strong problem-solving skills and the ability to work independently and collaboratively in a team environment.

Desired Skill-set

• Prior experience in video management systems or a similar domain.

Responsibilities

• Part of the application team to design and develop software integrations with Video Management Systems (VMS) using Microsoft (.NET) technologies;
• Responsible to gather and collect user requirements and document for overall software design;
• Build rapport with customers to understand their pain-points and business needs;
• Work collaboratively with team members for system and module integration and testing within project milestones;
• Responsible for training and supporting end-users on the software implementation and delivery;
• Provide documentation & manuals for all phases of project lifecycle from requirements, design, operation, testing and post support.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

The Project Engineer for the project will be responsible for managing and overseeing the technical aspects of the offshore substation engineering, procurement, construction, transport & installation, and commissioning processes. This role involves ensuring that all engineering activities are conducted in accordance with project specifications, timelines, budgets, and quality standards. The Project Engineer will work closely with the engineering, construction, and commissioning teams to ensure the successful execution of the offshore substation project.

DUTIES & RESPONSIBILITIES

Engineering and Technical Support:

• Coordinate and oversee the detailed design activities for the offshore substation, ensuring compliance with Employer Requirement, industry standards (e.g., IEC, DNV, ISO), and safety regulations.
• Support performing engineering calculations, simulations, and assessments to verify the integrity of designs and ensure that all technical requirements (e.g., electrical, mechanical, structural) are met.
• Provide technical support to the project team during design, procurement, construction, and commissioning phases. Address any technical queries and assist with resolving complex engineering challenges.
• Participate in design reviews and workshops with the engineering team, ensuring that designs are optimized for cost, schedule, and performance.

Procurement, Supplier & Subcontractor Management:

• Work closely with the procurement team to define technical specifications for equipment, materials, and systems required for the offshore substation. Ensure that procurement activities align with engineering requirements.
• Liaise with suppliers and subcontractors to ensure the timely delivery of materials and equipment. Participate in supplier selection and manage technical discussions and clarifications.
• Oversee the performance of subcontractors and suppliers during the entire project schedule, ensuring compliance with technical requirements and specifications.

Construction and Transport & Installation Oversight:

• Coordinate with the construction team to ensure that the offshore substation is constructed according to design specifications. Supervise the installation of electrical, mechanical, and structural components of the substation.
• Monitor the quality of materials, workmanship, and installations. Ensure all activities adhere to the project’s quality management system (QMS) and relevant standards.
• Liaise with the offshore construction team to provide technical support, ensuring that engineering issues are promptly addressed and resolved. Act as the primary focal point for any technical challenges during construction and T&I stage.
• Track the progress of construction and transport & installation activities, ensuring they are completed on schedule. Provide regular updates to the Project Manager regarding the status of engineering tasks.

Safety, Health, and Environmental (SHE) Compliance:

• Ensure that all engineering and construction activities adhere to the project's health, safety, and environmental (HSE) policies and regulations. Support in conducting safety audits and risk assessments where applicable.
• Identify potential risks associated with engineering tasks, including offshore conditions, and work with the project team to develop strategies to mitigate these risks.

Commissioning & Handover:

• Provide technical support during the post-commissioning phase to address any issues that arise and ensure the substation operates efficiently.
• Collaborate with the commissioning team to ensure the offshore substation is tested and commissioned successfully. Provide technical support during system tests, including electrical, mechanical, and communication systems.
• Ensure all technical documentation, including design calculations, test reports, commissioning results, and as-built drawings, is accurately recorded and handed over to the Employer.

Reporting & Documentation:

• Prepare and deliver regular technical reports to the Project Manager and senior management, outlining the status of engineering tasks, challenges, and any risks, being incorporated in Project Report.
• Maintain accurate and up-to-date technical documentation, including design changes, specifications, test results, and approvals. Ensure all documents are in compliance with project management processes and procedures.

Coordination & Communication:

• Work closely with other disciplines (electrical, mechanical, structural, etc.) to ensure that the design, construction, and commissioning of the projects are well integrated.
• Maintain clear communication with Employer, subcontractors, suppliers, and other stakeholders. Liaise with project team in providing technical explanations and in resolving any issues that arise during the project lifecycle.

REQUIREMENTS

Education

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Civil Engineering, or a related field. A Master’s degree is a plus.

Experience

• Minimum 5-8 years of experience in project engineering, with at least 3 years in offshore energy projects (e.g., offshore substations, offshore wind, or oil & gas industry).
• Experience with electrical, mechanical, and civil engineering aspects of offshore substations is highly desirable.
• Experience in project coordination and the ability to manage technical tasks within a multidisciplinary team.

Qualifications

• Strong understanding of offshore substation systems, including electrical distribution, power transformers, switchgear, protection systems, and control systems.
• Familiarity with the design, procurement, construction, and commissioning phases of offshore substation projects.
• Knowledge of relevant codes and standards (e.g., IEC, DNV, ISO, and offshore standards).
• Strong verbal and written communication skills, with the ability to clearly present complex technical information to non-technical stakeholders.
• Ability to work effectively with Employer, subcontractors, and team members, both onshore and offshore.
• Strong analytical and problem-solving skills with the ability to resolve technical issues on the spot and think critically during challenging situations.
• Knowledge of offshore health, safety, and environmental regulations and the ability to implement safety measures during engineering and construction activities.
• Offshore safety certifications (e.g., BOSIET) are a plus.
• Familiarity with engineering design software (e.g., AutoCAD, VISIO, etc.) is desirable.

You will be involved in the planning and design development of bridge engineering and structures projects. You will conduct feasibility and engineering studies, review design submissions or carry out detailed civil and structural design for road / rail projects. You will also be involved in management of design consultants, conducting project safety reviews and construction audits for major infrastructure projects, reviewing engineering standards as well as providing technical support to construction teams and other LTA technical divisions for project implementation.

Requirements:
• Tertiary qualification in Civil / Structural Engineering or equivalent
• At least 3 years of relevant experience in Civil / Structural Engineering design with knowledge in structural design and construction of underground engineering works / bridges /rail
• Keen interest in land transport infrastructure projects
• Good analytical, communication and interpersonal skills
• Candidates with strong relevant years of experience will be considered for senior roles

Technical Sales Engineer
5 days
9am-6pm
Kallang
$4000-$6000

The Technical Sales Engineer is responsible for supporting the sales staff in presenting technical presentations of our products as well as assisting on installations of our products in both a pre and post-sales support role

Responsibilities:

• Provide pre- and post-sales technical support to customers
• Technical support of field service engineers and customers when required
• Evaluating and establishing vision system performance specifications
• Manage customer specific projects & documents

Requirements:

• Degree / Diploma in engineering discipline with minimum 1 year experience
• Knowledge in field servicing and semiconductor industry
• Knowledge in Die Sorter or Wafer Sorter will be preferred.
• Ability to troubleshoot electronics hardware system is an added advantage.
• Good Knowledge of PC hardware, OS and networking.
• Proficient in Microsoft application
• Min 1 year related experience. Technical and support to field service engineer and customer

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

ISCE2 is looking for a highly motivated candidate to join Advanced Characterization and Instrumentation (ACI) Division. This candidate will play an important role to contribute the following and ensure successful and sustainable operations for our ACI technical domains.

• Maintain quality management system and support material characterization requirements for technical domains "Chromatography and Mass Spectrometry" and "NMR, Physical and Thermal Characterization".
• Chromatography and Mass Spectrometry Domain - HPLC / LC-QTOF / LCMS-MS / CIC / GPC / ICP-OES / ICP-MS / GC / TD, PY, HS-GCMS / Gas sampling and analysis, etc.
• NMR, Physical and Thermal Characterization Domain - NMR, FTIR, UV, BET, SDT, TPDRO, EA, Rheometer, Tensile Testing, etc.
• Foster strong partnership and close collaborations with both internal R&D and external key industry stakeholders.
• Demonstrated competency in managing analytical instruments. This includes applying specialised knowledge to build deeper understanding for method development / validation and equipment calibration / troubleshooting / maintenance.
• Conduct analytical training for laboratory personnel, ensure appropriate competency before certifying them as authorised users.
• Strong focus and compliance with health, safety and environment requirements (laboratory safety, general housekeeping, chemical storage, waste disposal, etc).
• Good interpersonal and communication skills to interact with various project stakeholders, both internally and externally, through routine updates, written reports and/or meeting presentations.
• Participates in R&D project meetings to provide technical inputs as when required.
• Some knowledge in electronic laboratory information systems that connect with analytical data handling or workflow projects will be an advantage.
• Procurement duties – Laboratory supplies, equipment consumables and maintenance services.

Job ID: 19411

• Location: Expo
• Working hours: 9am - 6pm
• Salary: up to $4,500 (Depending on experiences)

Job Description

• Provide technical support to customers either on-site or remotely.
• Troubleshoot and repair systems at customer site.
• Install new test systems and software upgrades.
• Work on projects such as creating manuals/SOPs etc.

Job Requirement

• Diploma or Degree in Electronics, Mechatronics, or a related field.
• Proficiency in Japanese (written and spoken) to effectively communicate with counterparts in Japan during weekly meetings, training, or troubleshooting.
• Intermediate skills in Microsoft Excel and Word.
• A team-oriented mindset with strong interpersonal and communication skills (oral and written).
• Willingness to travel frequently overseas on short notice.
• Flexibility to work overtime or on public holidays if necessary.
• A proactive attitude toward acquiring technical knowledge relevant to the role.
• Prior experience in a customer support role.
• Over 5 years of experience in the semiconductor industry.
• Familiarity with lasers, oscilloscopes, spectrum analyzers, or other similar instruments.
  

Interested applicants, kindly send your updated resume to Joanne (R21101135) [email protected] with the email subject header "Job Application for "19411, Assistant Engineer/Engineer".

Only shortlisted candidates will be notified, other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Pasona Singapore Pte Ltd

Joanne Yeo Min Qian
EA License No:90C4069

Registration No.: R21101135

• Degree in Computer Science Engineering or a relevant discipline.
• Developed software in at least one full Software Development Lifecycle.
• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object-oriented software design and UML modelling
• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
• At least 4 years’ experience in object-oriented software development.
• Strong analytical and problem-solving skills.
• Good written and verbal communication skills.
• Self-motivated, independent and a good team player.

Job Description

Overall Job Summary

The incumbent is responsible to provide support in the day-to-day overall HR and office administration functions, including handling of administering pay and employee benefits, recruitment and selection, training and development, updating of HR policies and procedures, employee relations and administrative matters.

Responsibilities and Duties

• Advertise, search and schedule candidates for interview
• Process clients’ monthly payroll and CPF
• Manage end-to-end process of on boarding and off boarding of employees
• Handle EP, work pass application, renewal, and cancellation
• Support daily administration/operations matters
• Other admin duties assigned by the Manager

Job Requirements

• Minimum 2 years of relevant HR experience with a diploma / degree in Human Resources Management or equivalent.
• Possess effective verbal and written communication skills.
• Resourceful, initiative, self-motivated, diplomatic and people-oriented.
• Good team player and yet able to work independently with minimal supervision.
• Ability to multi-task with good time management skills.
• Proficient in Microsoft Word, Excel, Power-point and IT savvy.
• Experience with Opensoft and Success Factors HRIS software will be an added advantage.
• Able to commence employment within short notice.

Job Responsibilities:

• Report to Project Manager.
• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Coordinate with Archi, C&S, M&E, BIM team on drawings, BIM models and site activities.
• Site inspection & upkeep of site record.
• Attend meetings, liaise with consultants, clients, etc.

Job Requirements:

• Relevant Degree in Civil Engineering recognized by Singapore PE Board.
• Minimum 10 years of experience in construction projects.
• Analytical, organized and possess strong planning skills.
• Excellent project and time management abilities.
• An effective communicator and has strong interpersonal skills.
• Highly driven and able to work under minimum supervision

Job Description & Requirements

• Support on Wintel & virtualization infrastructure.
• Knowledge and experience in operations of virtual technologies such as VMWare
• Windows Server OS administration and support
• Server administration such as Active Directory, DNS, Databases, IIS security configuration and patching, and Backup/Restore
• Troubleshooting of VMWare, MS Windows technologies, AD, clustering and MS NLB (Network Load Balancing) especially troubleshooting.
• Experience or working knowledge of Disaster Recovery technologies helpful.

JOB DESCRIPTION

We are looking for a strong candidate with strong AI background and experiences in audio, speech AI training for industrial projects on audio & speech recognitions.

Key Responsibilities: Work on audio processing, data preparation and multiple model training of multi-language code-switch ASR for projects.

JOB REQUIREMENT

• Has a related B.S degree in Computer Science or Software Engineering with min 5 years of relevant experience
• Experiences in speech signal processing, speech recognition, in both hybrid models, supervised E2E models, LLMs fine-tuned models and deep learning
• Strong in the following programming languages: Python, Pytorch, C/C++, Linux Bash/Shell
• Knowledge in web-based and app developments for demo systems is advantageous

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

As a Software Engineer or Senior Software Engineer, you will be responsible for designing, developing, and maintaining applications on the Microsoft Windows operating system. Your work will be critical in ensuring hardware and software compatibility, security, and system stability. You will collaborate closely with cross-functional teams to deliver reliable and efficient software applications.

Key Responsibilities:

Software Development: Design, develop, and maintain Windows applications.

System-Level Expertise: Possess an in-depth understanding of the Windows system architecture to create efficient and stable applications.

Debugging and Troubleshooting: Identify and resolve issues related to software application functions, performance, and system stability by utilizing debugging tools and techniques.

Security Compliance: Ensure that software adheres to security best practices and that they do not introduce vulnerabilities into the system.

Testing and Validation: Develop and execute comprehensive testing and validation procedures to ensure software functionality and reliability.

Documentation: Create clear and detailed technical documentation.

Collaboration: Work closely with cross-functional teams to ensure software compatibility and functionality.

Qualifications

• Bachelor’s/Master's degree in Computer Science, Computer Engineering or related technical discipline.
• Highly proficient in C/C++.
• Understanding of security principles and best practices.
• Strong problem-solving skills and attention to detail.
• Excellent communication and documentation skills.

Following skills will be taken into consideration for a senior role:

• 5+ years of professional software development experience using C/C++.
• Deep understanding of Windows internals, memory management, and system architecture.
• Experience with any of the following:

1. Windows Driver Kit (WDK) and minifilter driver development.
2. Microsoft Foundation Classes (MFC).
3. Component Object Model (COM API).
4. Debugging tools such as WinDbg and SysInternals
5. Familiarity with Windows Hardware Certification Program (WHCP).

ISCE2 is looking for a highly motivated candidate to join Advanced Characterization and Instrumentation (ACI) Division. This candidate will play an important role to contribute the following and ensure successful and sustainable operations for our ACI technical domains.

• Maintain quality management system and support material characterization requirements for technical domains "Chromatography and Mass Spectrometry" and "NMR, Physical and Thermal Characterization".
• Chromatography and Mass Spectrometry Domain - HPLC / LC-QTOF / LCMS-MS / CIC / GPC / ICP-OES / ICP-MS / GC / TD, PY, HS-GCMS / Gas sampling and analysis, etc.
• NMR, Physical and Thermal Characterization Domain - NMR, FTIR, UV, BET, SDT, TPDRO, EA, Rheometer, Tensile Testing, etc.
• Foster strong partnership and close collaborations with both internal R&D and external key industry stakeholders.
• Demonstrated competency in managing analytical instruments. This includes applying specialised knowledge to build deeper understanding for method development / validation and equipment calibration / troubleshooting / maintenance.
• Conduct analytical training for laboratory personnel, ensure appropriate competency before certifying them as authorised users.
• Strong focus and compliance with health, safety and environment requirements (laboratory safety, general housekeeping, chemical storage, waste disposal, etc).
• Good interpersonal and communication skills to interact with various project stakeholders, both internally and externally, through routine updates, written reports and/or meeting presentations.
• Participates in R&D project meetings to provide technical inputs as when required.
• Some knowledge in electronic laboratory information systems that connect with analytical data handling or workflow projects will be an advantage.
• Procurement duties – Laboratory supplies, equipment consumables and maintenance services.
• Minimum 3 years of experience.

JOB DESCRIPTION

We are looking for a strong candidate with strong AI background and experiences in audio, speech AI training for industrial projects on audio & speech recognitions.

Key Responsibilities: Work on audio processing, data preparation and multiple model training of multi-language code-switch ASR for projects.

JOB REQUIREMENT

• Has a related B.S degree in Computer Science or Software Engineering.
• Experiences in speech signal processing, speech recognition, in both hybrid models, supervised E2E models, LLMs fine-tuned models and deep learning
• Strong in the following programming languages: Python, Pytorch, C/C++, Linux Bash/Shell
• Knowledge in web-based and app developments for demo systems is advantageous

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Responsibilities:

• Lead and direct cross-functional team in program execution
• Ensure proper qualification of new projects and successful implementation of programs in the production/manufacturing unit
• Track and monitor project progress to ensure project schedules and cost objectives are met
• Actively follow on sales leads and take lead in business development
• Serve as primary technical contact with customers on strategic or politically sensitive issues
• Provide support to BD manager in generating quotation for molding projects involving new toolings
• Provide customer support and perform in BD activities to direct customers; Serve as primary technical contact with customers on strategic or politically sensitive issues
• Work with Manufacturing on developing and establishing workflows and production concepts (to optimize production efficiency &meet customers’ requirements)
• Identify and specify engineering requirements for new projects
• Initiate equipment procurement activities for new projects when needed (with Purchasing)
• Plan and execute tooling qualification activities with supporting groups to achieve successful project execution
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Job Requirements:

• Diploma/ Degree in Mechanical Engineering or related
• Minimum 3 years of working experience in project management & production process
• Plastic injection moulding and mould assembly background preferred

Note

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Thin Film department diverse team of talent. You will be responsible for supporting Thin Film Equipment startup, maintenance and related activities to support daily production and achieve operation targets.

What you will be working on:

• Support CVD/PVD equipment engineering related activities to achieve operation targets and meet company objectives
• Participate in Continuous Improvement for Cost, Yield, Productivity and Uptime
• New Equipment Startup and Relocation to support Production Plan
• Tool Ownership and accountability for Uptime, Wafers scrap, Parts Management, Equipment Down Memo Reduction
• Troubleshoot and resolve Equipment issues to support daily production
• Review and optimize equipment maintenance procedures
• Consumable and spare management ensure adequate provision
• Participate in technology transfer from motherfab
• Participate in implementation of TSMC/NXP BKMs and generate SSMC BKMs
• Update of OIs and SOPs to document real and best practices
• Preventive Maintenance Planning and alignment of schedule with Manufacturing
• Conduct Training and certification for new PM crew in terms of Hands on and Theory
• Drive Manufacturing for Monitoring Time reduction to improve Uptime
• Lead/ Participate in Transform Platform and generate LSS, BKMs and Trade Secrets for value creation for the company
• Able to perform weekend 12-hour shift or Swing Shift or any shift pattern as defined by Manager

More About You:

• Bachelor in Engineering (Mechanical/Mechatronic/Electrical/Electronic)
• 1-3 years’ experience in semiconductor manufacturing environment.
• 5 years direct experience in CVD equipment for Diploma holders
• Knowledge in the following tool types AMAT Endura , Centura WxZ, Novellus Altus, Tel Scrubber, Jusung Eureka
• At least 3 years’ experience in same field will be consider for senior position
• A strong background and experience in semiconductor manufacturing

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

6 Days working

MRT Project

Min 3 Years of Experience in LTA / MRT Projects

Responsibilities:

• Oversee the construction activities and progress, plan, implement and monitor work
• Schedule in accordance to the master and detailed work program
• Liaise with Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle of technical and engineering problems
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule,
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep site safer and neat
• Supervise ongoing site activities closely

Requirements

• Diploma/Deg in Civil Engineering or equivalent
• Min. 3 years of working experience, preferably in LTA projects
• Experience in managing D/wall and Borepiling and Tunneling Projects

HOW TO APPLY:
Interested applicants, kindly send your resume in MS WORD format to ref45(at)trustrecruit.com.sg
We regret only shortlisted candidates will be notified.
Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.
Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Rachel Tang Sue Leng
EA Personnel Reg No: R24121588

Responsibilities:

• Oversee the construction activities and progress, plan, implement, and monitor work
• Schedule following the master and detailed work program
• Liaise with a Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle technical and engineering problems
• Guide supervisors about construction works, ensure progress according to schedule,
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep the site safer and neat
• Supervise ongoing site activities closely

Requirements:

• Diploma in Civil Engineering or equivalent
• must have Lifting Engineer Certification for a Senior role
• Experienced in Singapore underground project, D/wall, and other structural works
• Minimum 2 years of relevant experience in LTA Project is preferred
• willing to work 6 days and/or 5.5 days per week

As the Assistant Purchasing Manager, you will support the Head of Purchasing in sourcing and procuring products essential for our company's operations.

This is a crucial role in maintaining inventory levels, negotiating with suppliers, and ensuring timely delivery of products.

Responsibilities:

• Participate in the developing of purchasing strategies together with the HOD based on company goals and market trends.
• Source and evaluate international suppliers based on price, quality, selection, service, support, availability, reliability, and supplier reputation.
• Negotiate contracts, terms, and pricing with suppliers.
• Maintain and update inventory records and ensure accuracy in purchasing and delivery.
• Work closely with international suppliers, key stakeholders and functional team members to ensure uninterrupted supplies of products.
• Evaluate supplier performance and conduct regular performance reviews to ensure compliance with contractual obligations.
• Monitor and analyze market trends and competitor activities to identify opportunities and challenges.
• Handle administrative tasks such as preparing purchase orders, requisitions, and reports.
• Resolve supplier or delivery issues in a timely manner to minimize disruption to operations.
• Stay updated with industry trends and best practices in purchasing and supply chain management.
• Ensure compliance with relevant laws, regulations, and company policies in all procurement activities.
• Communicate effectively with internal teams to provide updates, gather feedback, and address concerns related to procurement.

Requirements:

• Bachelor’s degree in Business Administration, Supply Chain Management, or a related field.
• Proven 5 years’ experience in purchasing, procurement, or supply chain management in the foodservice industry.
• Strong negotiation skills and ability to build and maintain supplier relationships.

Remuneration

• Basic salary: $4,000 t0 $4,500 per month (can be negotiated depending on experience)
• 14 days annual leave per year
• 1 month AWS
• Variable Bonus
• Medical insurance coverage
• 5.5 days workweek (on assigned Sat duty)

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

WhatsApp me @ +65 8882 1834 for a prompt response to your enquiry!

Charmaine Soh Rui En | Reg No.: R24122333

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings, and other documents prepared for the different stages of a project.
• Supervise the installation, testing, and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Correspond with project experience acquired and individual competency in technical knowledge/skills, project management, and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognized by the Professional Engineers Board, Singapore
• Registered with the Professional Engineers Board, Singapore.
• Minimum 3 years of relevant experience in Mechanical engineering design for building services and infrastructure works. Those with more than 5 years of relevant experience may considered for a Senior role.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational, and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous

Job Responsibilities:

• Handling MEMS modules development related project independently.
• Host regular PRS review meeting with project owners of TD integration and Fab module engineers.
• Provide robust recipe to TD PI for new process developing
• Co work with fab module engineers to provide solutions for projects
• Provide risk assessments for new developing projects.
• Continuous improvement

Job Requirements:

• Bachelor degree in any Engineering discipline
• At least 3 years' experience from Etch/Diffusion/Thin Film/Photo process engineer
• Integration experience is a plus
• Capable of using DPE, 7 QC tools, FMEA, SPC, 3L5W, 8D