Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Responsibilities:

• Lead Analog Circuit Design and Optimization:
  Direct the design and optimization of complex analog circuits, leveraging advanced schematic capture and simulation tools to achieve superior performance and reliability across diverse operating conditions.
• Drive Digital Standard Cell Library Development:
  Oversee the creation of high-performance, low-power digital standard cell libraries, ensuring alignment with stringent performance, power, and area specifications.
• Innovate Cutting-Edge Cell Architectures:
  Develop and implement advanced digital standard cell architectures, introducing innovative solutions to enhance design efficiency and meet evolving technological demands.
• Guide Layout Implementation:
  Provide strategic oversight to layout teams, ensuring accurate, efficient, and manufacturable physical implementations that adhere to performance and reliability goals.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s/Ph.D.) strongly preferred.
• Experience:
  10+ years in analog design and digital standard cell development, with expertise in deep sub-micron process technologies (12nm and below) and proven tape-out leadership.
• Advanced Technical Skills:Deep expertise in analog design, power optimization, and noise analysis.
  Mastery of tools such as Cadence Virtuoso, Spectre, and HSPICE for design and simulation.
  Extensive experience in digital standard cell library creation, optimizing for power, performance, and area.
  In-depth knowledge of deep sub-micron challenges, including layout optimization and power delivery strategies.
• Leadership and Communication:
  Demonstrated ability to lead cross-functional teams, mentor junior engineers, and foster innovation. Exceptional communication skills to articulate complex concepts and align multidisciplinary teams toward common objectives.

Our client provides the machinery, tools and technology in getting the best end glass quality.

• Manage all maintenance related problems on site, troubleshoot and provide technical support to customers.
• Responsible for site acceptance tests, commissioning and start-up assistance.
• Handle the customers on after sales service, understand and help customers define their needs.
• Perform trainings to enable users in optimizing the product performance.

Requirements:

• Diploma in Electrical/Mechanical/Mechatronic Engineering or equivalent
• At least 2 years of relevant working experience in servicing machineries.
• Independent with good time management skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
  Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Provide presales support by solving technical business solutions for the client.
• Responsible for product demonstration, proposal writing, creating compliance table, training and product enablement.
• Develop working proficiency and obtain certifications on assigned products and technologies.
• Conduct hands-on POC independently and present vendor’s solution to partners and end-users.

Requirements:

• Diploma in Computer Studies or equivalent
• At least 2 years of presales experience in IT network and Cybersecurity domain.
• Good knowledge of security and networking infrastructure environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Automation/Electromechanical Equipment)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Set up and troubleshoot semiconductor equipment.
• Document engineering enhancements for continuous improvement and future reference.
• Develop procedures for the assembly, inspection, and testing of equipment.
• Collaborate with the engineering and software teams to enhance system designs.
• Work alongside cross-functional engineering teams to troubleshoot and resolve system issues.

APPLY NOW!!!

• Min. Diploma in Mechanical or Mechatronics Engineering.
• At least 2 years of experience in setting up and managing automation equipment.
• Possesses a thorough understanding of electromechanical systems.
• Willingness to travel internationally for field support as needed.
• Availability to work overtime when required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69727 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Vision Inspection Systems)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist in component selection, engineering evaluations, and testing of parts and sub-modules for vision inspection equipment.
• Design electrical parts and sub-modules for vision inspection systems.
• Maintain product design documents, including drawings and BOM (Bill of Materials).
• Work closely with and manage suppliers to ensure all design requirements are met.
• Provide troubleshooting expertise for design and system issues.
• Plan and coordinate the release of new designs to manufacturing.

APPLY NOW!!!

• Min. Diploma in Electrical or Electronic Engineering.
• Familiarity with CAD software for electrical layout and schematic design.
• Experience working with PC hardware, Windows OS, and relevant software.
• Knowledge of PCB/PCBA design, fabrication, and testing processes is a plus.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cloud Infrastructure Engineer (Endpoint Security) to join us!

Responsibilities:

· Work with Product Owner and Product Principals to operate the various endpoint security tools, including:

- EPP/EDR

- Data Loss Prevention

· Work with Central ICT Infra teams to operate the on-prem components of the SSE platform.

· Conduct system health check and proactively identify and troubleshoot issue in end-to-end manner.

· Manage the change, release, incident, problem management processes in ITSM platform.

· Document the requirement and specification to address the needs for all Public Service agencies.

• Comfortable with a 5-year direct contract
• At least 5 years of experience in the above domain areas

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS's privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Benefits

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

Role:

Project Sales Engineer (Mechanical / Engineering Design)

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

• Assists Lead Engineer in developing concept for new project work;
• To develop Civil & Structural framing plans, layouts from concept stage to basic engineering stage to further detailed engineering stage for smaller to larger projects;
• Assists Lead Civil and Structural Lead in developing Civil and structural details, drawings, calculations, specifications for larger projects;
• Works independently in the detailed design, specifications, and calculations;
• Develops Expertise in carrying out design works to comply to local code requirements;
• Ensures that the drawings developed for the project comply to project standards/ company standards;
• Assists Lead Engineer in dealing with shop drawings, vendor print review and comment, if necessary or as advised by the Lead Engineer;
• Assists Lead Engineer working on developing necessary documents as per project requirement and also assist Lead Engineer in analyzing output results;
• Assists Lead Engineer in meeting with client in kick off meeting or other weekly meeting as and when needed;
• Provides guidance to the Assistant Engineer, Engineer in carrying out the design works;
• Visits Client site as and when necessary and as advised by Lead Engineer;
• Assists in technical report writing, compiling and coordinating;
• Assists Project Managers in achieving project completion within budget and on schedule;
• Addresses site issues related to design;
• Supports construction on solving process design issues. Visit site to check and analyses issues;
• Assists Project Managers in achieving project completion within budget on schedule;

Requirements

• Bachelor Degree in Engineering (Civil)
• Design and Construction experience preferably in industrial buildings with Precast and Long span roof trusses experiences
• Experience with checking of shop drawings for Precast and steel structures and able to do detailed Design and work in a team and able to provide details for computer aided design team
• Familiar with the Local authorities requirements for civil and structural submissions

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

We are seeking a highly skilled Senior Software Developer to contribute to significant government projects!

• Join a team that utilizes technology to enhance the lives of Singaporeans.
• Agile development culture to promote continuous learning and growth.
• Competitive remuneration package. Hybrid working arrangement.

Responsibilities:

• Design and implement scalable backend solutions using Golang.
• Engage in Agile practices like sprint planning and daily standups, alongside Scrum methods such as code review and unit testing, ensuring iterative delivery of high-quality software.
• Collaborate with cross-functional teams to deliver high-quality software products.
• Participate in code reviews and provide feedback to improve code quality.
• Deploy applications to production and provide ongoing support.
• Spearhead initiatives to streamline build and release processes, leveraging DevOps principles and automation tools to enhance deployment pipelines.
• Troubleshoot and resolve technical issues in a timely manner.
• Identify opportunities for process improvement and contribute to continuous improvement efforts

Job Requirements:

• Singaporean only.
• Minimum of 5 years of experience in Software development, with at least 4 years in Golang, ReactJS and NodeJS.
• Prior hands-on experience in handling highly scalable distributed system, configuring automated build, test, and deploy pipelines to streamline the software delivery process.
• Proficient in REST and SOAP API.
• Experience in cloud-native technology, such as AWS (Related certification will be an added advantage.
• Hands-on experience with databases like Postgres, MySQL, and Redis.
• Proficiency with development tools like Visual Code and CI/CD tools (e.g., Git, Jira, Jenkins).
• Working experience in Agile environments or projects (Scrum/Kanban).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Location: Tuas

Working Hours: 12 hrs shift (2-2-3)

Job Scope:

• Support the shift operation in all activities, ensuring that it is meets all environmental, health and safety regulations.
• Support the STS in ensuring that all operation and maintenance activities are in compliance to the safety procedures for Lock out/Tag out, energy control procedures, line breaking activities, confine space entry, work at height, hot and cold work permitting.
• Ensure that the shop floor is in a constant state of safety and quality regulatory compliance and inspection ready
• Perform all production, pre MI and post MI activities to ensure manufacturing attainment is achieved, assist the STS in the deployment of resources based on criticality and priority.
• Assign operation task according to Manufacturing Standard Work (MSW) and Operation Standard Work (OSW)
• Participate in all troubleshooting activities in processing issues, deviations and coordinating with other functions when require immediate and preventive actions.
• Participate in all investigation, report and troubleshoot findings on both EHS and quality related issues observed during manufacturing or during batch record review.
• Participate in Continuous Improvement (CI) activities, contribute ideas and perform Plan, Do, Check, Action (PDCA) cycle
• Support the STS in the development of risk assessment, creation of job safety assessment and participate in HAZOP when required.
• Develop Standard Operating Procedures as part of change control and perform periodic review.
• Assist in all commissioning, qualification and validation activities as necessary.
• Participate as a member of the emergency response team (ERT) when necessary.

Job Requirements:

• Min. Degree in Chemical engienering or any relevant field
• Some Pharma Manufacturing intern experience

For interested applicants, please send your updated resume to: [email protected]
All candidates’ information will be treated with the strictest confidence
Melissa Zhang Zhiqi (Mezzo)
R2197564
Recruit Express Pte Ltd
99C4599

Contract :

• 3 months - Jan 2025 till Mar 2025

Working Hrs:

• Monday to Friday, 8:30 am to 6:00 pm

Responsibilities:

• Maintaining computer networks including mainframes, VPNs, routers and other physical hardware
• Installing and configuring network equipment
• Creating firewalls and updating virus protection software and data security systems to keep data and communications protected

Qualification:

• ITE or higher

Experience:

• Min 1 year

• SGD 5,000 – 7,000 + Variable bonuses
• Consultancy handles projects in major flagship infrastructure & building projects government agencies(LTA, NParks, HDB, etc)
• Excellent career progression + Equal opportunities for advancement
• Attractive employee welfare benefit
• Wide range of projects grant a competitive advantage for future career progression
• Location: Site stationed | 5.5 work days

Responsibilities

• Oversees and inspect building project on day-to-day operations
• To liaise and coordinate with relevant authorities and Contractors
• To manage and develop project schedule and to ensure compliance with authorities’ requirements,
• To establish and monitor safety and risk management and performance of environmental control measure

Requirements:

• Degree in Civil/Structural Engineering from a recognized Institution;
• Have at least 4-5 years of experience

Applicants are encouraged to include the following in their resume:

1. Expected salary
2. Notice period
3. Past project details – what kind of construction/building, etc

We regret to inform that only shortlisted candidate will be contacted.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

Field Service Engineer (Safety / healthcare)

up to 4K

Field Service Engineer, Gas Detection – Safety Service Department.

Purpose of Function

The basic function within Dräger Service is to carry out all technical and service duties as directed by the Service Manager in a professional and safe manner, and to provide support and establish a good relationship with internal and external customers in order to achieve high customer satisfaction.

Tasks and Responsibilities

The essential tasks of Field Service Engineer consist of, but are not limited to the following:

• Support start-up, contract maintenance and other service activities with emphasis on safety and protection.

• Perform routine preventive maintenance, logging, corrective maintenance works and to carry out warranty repairs.

• Participate in service and repair of gas detectors, safety activities, emergency response, breakdown calls and ad hoc projects.

• Manage all orders efficiently until fulfilment stage, by working closely with Service team.

• Liaison with relevant parties such as customers, service supervisor, coordinators and logistic pertaining to queries, technical issues, status and deliveries.

• Ensure equipment turnaround and breakdown responses are achieved at optimal level of efficiency.

• To provide support to other service activities that may be assigned in the course of work

• Effective communication of technical information to employees, customers and external parties in an accurate and concise manner in both a written and verbal media.

• To participate/take up Workplace Safety & Health responsibilities/ activities as per requested by the company.

How to Apply:
Please send your resume to:

• To provide high-quality, onsite technical and troubleshooting services covering below support activities within the required SLA time frame.
• Hardware support: Technical diagnosis and coordination with OEM vendors for repair of defective hardware for a variety of devices including desktops/laptops/workstations, mobile devices, tablets, meeting room equipment, printers etc.
• Software support: diagnosis and resolution of software functionality for both the operating system and standard desktop applications
• IMACD: physical installations, moves, adds, changes, and de-installs for a wide variety of supported hardware devices including desktops/laptops/workstations, mobile devices, tablets, meeting room equipment, printers and etc. and supported software
• Enhanced support for VIP users
• Coordinate with infrastructure teams to resolve issues with network, servers or other infrastructure devices or services that impact the normal work of end users
• Support hardware and software changes (e.g. hardware device change/refresh, system upgrade/migration, patch update, etc.) for end users
• Asset management support for end user devices by following defined processes
• Provide smart hand support for all kinds of hardware such as printers, servers, network devices, backup devices, meeting room equipment, scientific devices etc.
• Onsite support for events such as trade shows or special meetings
• Regular checks for IT Room devices and Meeting Room equipment when required
• Deployment services for large-scale efforts include asset auditing and discovery, project support, image integration, on-site installation, user self-installation, migration, and asset recovery governed with full project status and reporting

Job Requirements

• Diploma in Information Technology, Computer Engineering, Electronics or related field
• 3 years of deskside support experience (MNC support and VIP support experience preferred)
• Experience in using ServiceNow is preferred
• 5 days work at Raffles Quay
• Salary up to $3200

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

• Singapore Based (Kranji)
• Monday - Saturday, 08:30 am - 05:30 pm
• Degree in Engineering (Civil) or equivalent (Recognized by PEB); Versed in PUB(WRN) projects with more than 5 Year(s) of working experience.
• Career Progression Opportunities

Responsibilities

Project Management

• To resolve all technical and non-technical issues during the project lifecycle.
• To ensure the tracking and monitoring of items per contractual requirement.
• Responsible for submission and monitoring of technical drawings, method statements and proposals.
• To ensure construction meeting client & regulatory requirements.
• To carry out short-term planning to meet site progress.
• To co-ordinate, program and monitor site work, materials, plant & equipment.
• Carry out project objectives to align with company goals.
• Minimize material wastage on-site and maximize machinery/equipment usage.
• To control the allocated direct workforce effectively i.e. no. of direct workers and overtime etc.
• Follow approved construction method that is cost effective, productive & without compromising on Quality.
• Achieve targeted progress of works to ensure the intended cash flow.

Technical Understanding

• Fully understand project drawings and scope of work.
• Understand the implications of different technical choices so as to meet the project objectives.
• Involving in providing value engineering solutions basing on his knowledge.
• To have knowledge in the preparation of engineering project proposals and method statements.

Requirements

• Candidate must possess at least Degree in Engineering (Civil) or equivalent (Recognized by PEB).
• Versed in PUB(WRN) projects with more than 5 Year(s) of working experience in the related field is an advantage.
• Candidate with comparable qualification may be considered for Project Manager post.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Site Engineer

Working Days: Monday - Saturday

Working Timing: 0830am - 530pm

Office Location: Kranji - Sungai Kadut

Salary range: $2500-$3500

Responsibilities

Project Management

• To resolve all technical and non-technical issues during the project lifecycle.
• To ensure the tracking and monitoring of items per contractual requirement.
• Responsible for submission and monitoring of technical drawings, method statements and proposals.
• To ensure construction meeting client & regulatory requirements.
• To carry out short-term planning to meet site progress.
• To co-ordinate, program and monitor site work, materials, plant & equipment.
• Carry out project objectives to align with company goals.
• Minimize material wastage on-site and maximize machinery/equipment usage.
• To control the allocated direct workforce effectively i.e. no. of direct workers and overtime etc.
• Follow approved construction method that is cost effective, productive & without compromising on Quality.
• Achieve targeted progress of works to ensure the intended cash flow.

Technical Understanding

• Fully understand project drawings and scope of work.
• Understand the implications of different technical choices so as to meet the project objectives.
• Involving in providing value engineering solutions basing on his knowledge.
• To have knowledge in the preparation of engineering project proposals and method statements.

Requirements

• Candidate must possess at least Degree in Engineering (Civil) or equivalent (Recognized by PEB).
• Versed in PUB(WRN) projects with more than 5 Year(s) of working experience in the related field is an advantage

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Job Responsibilities:

·Plan, execute, monitor and assist in the installation and ongoing support and maintenance of all hardware, software and networks in project delivery

·Conduct root cause analysis & implement pro-active measures

·Responsible for supporting operational systems satisfying contractual Service Level Agreement

·Perform and manage routine preventive maintenance and operational activities promptly and effectively

·Perform troubleshooting and fault rectification

·Provide up-to-date project documentation and reports

·Diagnose and rectify technical issues

·Perform standby duties if required

Job Requirements:

·Experience in Windows server OS, Unix/Linux OS & virtualization environment (VMware, HyperV etc.)

·Strong troubleshooting skills and analytical mind with problem-solving aptitude

· Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment

·Pro-active, dynamic and with good analytical/conceptual thinking

·Able to work independently as well as in a team and good interpersonal skills

·Good Working knowledge with VPN, firewall appliances would be an advantage

·Good working knowledge with routers, switches would be an advantage

·Good working knowledge in hardware like servers, storage area networks (SAN), network-attached storage (NAS) devices

•Experience in hardening of OS, system and network equipment

•Experience in Patch Management

•Good Knowledge of IT Infra services like Active Directory, DHCP, DNS, Exchange/Mail Service, Database, Web or App Server etc.

You may submit your resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

(EA Reg No: 20C0312)

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 5+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Location: Jurong East

Working hours : Mon – Fri, 8.30am – 5.30pm

Job Responsibilities:

• Supervise, execute and coordinate project activities together with a group of Engineers and Technicians
• Monitor and control project on schedule, within budgeted cost and quality standards.
• Work closely with consultant/ project owner to ensure project is delivered according to requirements.
• Perform system programming and troubleshooting during project implementation.

Requirements:

• Diploma/Higher Nitec in Electrical and/or Electronics
• 1-2 years’ experience in site supervision and coordination with main contractors and subcontractors
• Must have hands-on experience in alarm, card access and CCTV system installation knowledge.

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Key Responsibilities:

• Design power supply hardware for various switching mode power converters (3-phase Vienna Rectifier, NPC, PFC, Flyback, Forward, Buck, Boost, Resonant topologies, and Synchronous Rectification), ranging from 1,000W to 22,000W.
• Design on-board charger requirement, compact and high-power density requirement.
• Design to meet functional safety and reliability standards. For automotive grade.
• Theoretical analysis of concepts (calculation and simulation).
• Practical and detailed evaluation of all types of power circuits.
• Enhance and improve circuit performances such as Efficiency and Reliability.
• Creation of 3D/2D models, assembly drawings, PCB, and schematic designs.
• Support firmware development using various DSP/MCU platforms.
• As project key person to start from concept to mass production stage.
• Implement design for manufacturing and design for automation. DFx.
• Patent and technology creation, defining new power requirements.
• Electrical and Firmware architectures (lead and support).

Key Requirements:

• BSc, MSc, PhD, or researcher with Min. 8 years experience.
• Experience with EV chargers and onboard chargers (OBC) is a plus.
• Familiar with power measurement equipment.
• With solid technical know-how on the transformer, power Mosfet, PWM controller, and synchronous rectifier circuits.
• Understand the application of PID controllers and control loop analysis.
• Knowledge of EMC/IEC/UL/EN standards.
• Experience in PCB schematic and layout designs.

Job Description:

• Collaborate with other developers and engineers to design, build, and maintain applications.
• Develop end-to-end specifications for solution components.
• Perform testing and implementation of the solution.
• Troubleshoot software issues and participate in impact analysis of encountered issues.
• Generate relevant documentations, reports etc.
• Contribute to continuous improvement of software development best practices.
• Keeping up-to-date with industry trends and technology developments.

Requirements:

• Degree in Computing/ Computer Science/ Computer Engineering/ Info Systems / EEE or equivalent
• Entry level candidates with good learning attitude and relevant experience can be considered.
• Familiar to full-stack development and understand concepts of software engineering.
• Knowledge of Agile Development methodology.
• Knowledge of basic coding languages such as C++, Javascript, HTML5 and Java
• Basic programming experience.
• Knowledge of databases (SQL / NoSQL).
• Comfortable using AngularJS, NodeJS, ReactJS and other common frameworks to develop software for various platform.
• Ability to learn new software and technologies quickly.
• Ability to follow instructions and work in a team environment.
• Good team player with critical thinking, analytical and creative problem-solving skills.
• Detail-oriented.
• Candidates with more professional/complexity of experience can be considered for the senior role

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239