Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Project Management:

1. Assist Project Manager to plan overall schedule and tracking and prioritize job card sequence and methodology according to contractual requirements and onboard vessel/site condition.
2. Lead, manage and supervise project team on the execution of works as well as ensuring the delivery of assigned projects within the planned schedule.
3. Direct and plan sufficient resources of manpower, material, and equipment for the project team for meeting the targets according to contractual requirements.
4. Attend daily vessel coordination meetings with clients and prepare daily reports on progress.
5. Attend or chair meetings with clients, ship crews, vendors, and classifications of society for work scope clarification, permits to work systems compliance, schedule updates, working methodology planning, and any other contractual matters as required.
6. Be responsible for the team's wellbeing during traveling and offshore.
7. Any other associated tasks and responsibilities assigned from time to time by the organization.

WSH Management:

1. To facilitate the safe execution of works particularly in hot and any other incompatible works according to onboard vessel/site conditions as and when required.
2. Administer and plan for risk management with regards to all works carried out in ensuring best safe work practices are in place.
3. Responsible for the overall safety and health standard of work together with the project manager throughout the execution of projects as assigned.

Contract and Cost Management:

1. Perform as organization representative and be responsible as per contractual requirements throughout project execution duration.
2. Coordinate with the costing department and be alert in overall costing control to ensure maximum profit return to the organization.

Knowledge and Skills:

1. Able to travel overseas, offshore on short notice and on a long-term basis.
2. Able to attend to projects’ needs as and when required.
3. Strong level of planning, organization, people management, and communication skills in critical decision making and quick problem-solving.
4. Good knowledge of different scopes of work in aspects of the hull, mechanical, piping, and electrical for marine and offshore industries shall be advantageous.
5. High level in marine and offshore standards or class requirements on various works.
6. Good computer skills in Microsoft Office and Project.

Duties:

- Planning and execution of project plans at construction site

- Execute project plan and ensure works completed as per schedule and in accordance to contract specification and design drawing

- Ensure construction site fulfill authority's code of practice and comply with safety house rules.

- Handle correspondence job paperwork and submission

- Liaise with all parties involved in the project including authorities, consultants, clients, subcontractors and suppliers

- Attend site meetings and inspections, report regularly on progress and monitor schedule

- Prepare and monitor work schedules, project costing, procurement, and coordination with all partied involved to ensure work progress smoothly and completed within target time and budget

- Supervise and report progress of the work to Project Manager

- Ensuring project progress are on schedule and to meet the timeline given

- Make sure having the latest construction drawings on-site and work is constructed as per drawing given.

- Update drawing if there is any revision and to keep a updates copy in site office and head office

- Feedback to Project Manager on any issue encounter on site and proposed feasible solution.

- Any other adhoc duties assigned by Project Manager

Job Duties and Responsibilities:

• Supervision, executing and coordinate project activities.
• Ensuring that the project is on-schedule, within budgeted cost, and quality standards.
• Review project plans, specifications, and drawings to ensure accuracy and feasibility.
• Coordinating with Clients and Suppliers to develop project schedules, and resources plans.
• Attending Clients coordination and technical meetings.
• Supervise constructions activities.
• Formulation of Method-Of-Statement, Risk Assessment and Safe Procedure
• Involvement in both internal and external WSH Activities.
• Maintain accurate and comprehensive project documentation, including daily report, inspection records and As-Built drawings.

Job Requirements:

• Minimum Higher NITEC/ Diploma in Engineering or related field.
• Proficient in MS Office applications
• Possess valid Singapore Class 3 driving License
• Good team player with ability to lead and multi task
• Good interpersonal skills and communication skills

Project Engineer will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. Attend and manage dealing with vendors, designers, classification, and flag statutory on engineering issues

5. Reviewing technical specification and drawings from designer meeting owner, class, and customer requirements

6. To perform any other duties & Responsibilities assigned by superiors from time to time.

7. Ability to demonstrate and implement cost -saving measures.

8. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

- Possess positive working attitude

This role supports the Project Manager. It involves the planning and co-ordination of site work. The person in this role needs to be good at communication and obtaining feedback. Instructions must be given to site personnel in a manner that is easy to understand and the person needs to ensure his instructions are understood correctly. This person will also help the Project Manager with any issues that may arise on site.

Job Scope:
1.) Plan and coordinate site work
- Attend meeting with Main Con and work with PM to prepare relevant information i.e. drawings for approval.
- After approval, update Site Personnel of requirements.
- Prepare necessary permits, drawings to get clearance from authorities.
- Co-ordinate with PM, Site Supervisors and Main Contractor.

2.) Attend site meetings
- Ensure approved construction methods are communicated clearly to site personnel.
- Communicate frequently with PM and Site Supervisors.
- Prepare and pass updated drawings to Site Supervisors.
- Go through drawings and permits and explain to site personnel.
- Clarify with PM if unsure.
- Make decision on behalf of PM if there is a need on site.

- Please note that site can be by the roadsides, at substations or in tunnels. There will be some exposure to the elements.

3.) Submit applications for wayleave to relevant authorities.
- Process for application: Road Opening application, NCE, Purchase of Services Plan, Prepare drawing submission
- Monitor and submit site progress reports
- Submit weekly schedules to client
- Submit monthly progress report to PM

4.) Design of SOP

5.) Training of workforce to reach safety goalposts

Requirements:
- Possess certificate "Manage Workplace Safety and Health in Construction Sites (or Construction Safety Course for Project Managers)".

- Required to sign Permit To Work.
- Proven track record with SP group's projects in high voltage power cable installations.

- Candidates with class 3 license and/or their own transport will be viewed favourably.

- Working hours: Monday - Saturday, 8am-5pm

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Data Engineer

Internal Code: A2412

This is a healthcare application:

• Mobile application (iOS and Android)
• Dashboard (React)

What will you do?

• Support the development and business teams in unit testing and archiving data, engineered features, and algorithmic inputs/outputs throughout the data pipeline and to support analytics.
• Proven experience as a data engineer/ data analyst in mobile app development projects and administrative dashboards.

1. Create unit tests throughout the data and algorithms domain:

• Work with engineering and business teams to implement wide-coverage unit tests of data and engineered features at different stages throughout the data collection and processing pipeline
• Create unit tests of inputs to and outputs from the algorithms that drive the clinical service
• The unit tests include validation of the inputs and outputs of black-box machine learning algorithms
• Establish a regular process to execute the tests and document their outcomes as a part of our product development and release lifecycle

2. Implement and refine mechanisms to continuously archive the state of algorithmic inputs and outputs:

• Implement a process of taking snapshots of data/features input into algorithms necessary to recreate their outputs/predictions at any point in the past during the service
• Communicate requirements to the software development team

3. Assist in the successful delivery of regular service analytics and reports:

• Support the business and analytics teams in their daily and weekly delivery of reports on data completion, user engagement, and algorithm actions by addressing any data quality and validation requirements.

What are we looking for?

• Bachelor's Degree in computer science, engineering, business analytics, technology, or a related field.
• Minimum of 2 years of experience in data engineering, data analytics, or data product management roles within the tech industry. Experience in healthcare is a plus.
• Ability to implement tests in Python.
• Experience in machine learning algorithms
• Good understanding of the validation requirements of an algorithmic product. Knowledge of healthcare regulation and auditing requirements is a plus.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

What will you do?

• As a Full Stack Developer, you will be responsible for designing, developing, and maintaining web applications across both front-end and back-end technologies.
• You will work closely with our customers and teams which consist of Software engineer, DevOps specialist, Data analyst/scientist to deliver easy to use application to help improve developers experience and accelerate application delivery while using our runtime platform.
• Design and develop responsive web applications using modern front-end frameworks and back-end technologies.
• Integrate third-party APIs to enhance the functionality and user experience of our applications.
• Implement security best practices to protect user data and prevent unauthorised access.
• Optimize application deployment cycle through improvement of application design and automation workflow.
• Collaborate with cross-functional team from Development, Platform, and Product management teams to achieve common objectives.
• Participate in code reviews, sprint planning, and secondary SRE-role rotation for better understanding of runtime platform.

What are we looking for?

• Bachelor's degree or Diploma in Computer Science, Engineering, or a related field (or equivalent experience).
• Minimum 5 years of experience as a Full Stack Developer or similar role, preferably with background in containerization, orchestration, and cloud-native technologies.
• Proficiency in front-end technologies such as HTML, CSS, JavaScript, and modern frameworks like Next.js, React, Angular, or Vue.js.
• Experience in DevOps
• Strong understanding of back-end technologies including Node.js, Express, Python, or Go.
• Solid understanding of Git, RESTful APIs, and Agile methodologies.
• Hands-on Experience with developing application in cloud platforms (AWS, Azure) or PaaS platforms (Vercel, OpenShift, Heroku, or similar offerings).
• Experience with database systems such as PostgreSQL, MySQL, MongoDB, or similar offering from cloud providers.
• Experience with microservices architecture or serverless computing is preferred.
• Strong communication and collaboration skills, with the ability to work effectively in cross-functional teams.
• Familiarity with runtime technologies (ECS, Lambda), and infrastructure-as-code (Pulumi, Terraform) is advantageous.
• Familiarity with DevOps tools and practices, including Docker, and CI/CD (e.g. GitLab CI/CD, Github Action) is advantageous.
• Familiarity with implementing AI/ML based application, BI solution, Data warehouse, analytics, or visualisation is a plus.
• Certifications such as AWS Certified Developer or AWS Solutions Architect is a plus.
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Responsibilities:

• Responsible for docking with the APIs of major centralized exchanges around the world.
• Responsible for troubleshooting and correction of related business issues.
• Responsible for related business stability.
• Able to develop relevant business requirements according to product manager requirements

Requirements:

• Computer major or related major, bachelor degree or above.
• More than 8 years of software development experience, Java language programming, Internet middleware or frameworks such as spring, redis, mybatis, kafka, and guava. Familiar with microservice architecture.
• Proficient in using Mysql database/MongoDB for business development.
• Familiar with common algorithms, data structures and able to do complexity analysis.
• Proactive, able to complete work independently, and able to integrate into the team

We regret that only shortlisted candidates will be notified

Interested applicants please send your updated resume to [email protected]

Noga Lim Wei Loong

Registration Number: R1329872

EA License Number: 10C3804

People Profilers Pte Ltd, 20 Cecil St, #08-09, PLUS Building, Singapore 049705

http://www.peopleprofilers.com

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Key Responsibilities:

1. Design & Implementation:

• Integrate Azure Sentinel with on-premises and cloud-based resources for comprehensive threat visibility.

• Develop and manage Log Analytics Workspaces and data connectors.

2. Security Monitoring & Threat Detection:

• Create and maintain custom rules, alerts, and automation playbooks.

• Analyze security events, identify threats, and provide actionable recommendations.

• Monitor and manage SIEM dashboards for real-time threat intelligence.

3. Incident Response & Management:

• Respond to security incidents and conduct root cause analysis.

• Coordinate with stakeholders to mitigate risks and resolve vulnerabilities.

4. Optimization & Automation:

• Enhance Sentinel performance by optimizing data ingestion and query performance.

5. Documentation & Reporting:

• Develop and maintain documentation for configurations, processes, and incident responses.

• Generate detailed reports on security incidents, trends, and recommendations.

Qualifications & Skills:

• Bachelor’s degree in Computer Science, Information Technology, Cybersecurity, or related field.

• Proven experience with Azure Sentinel, Microsoft Defender, and Azure Security tools.

• Strong understanding of SIEM platforms and security operations.

• Knowledge of KQL (Kusto Query Language) for writing log queries and analytics rules.

• Familiarity with threat detection frameworks like MITRE ATT&CK.

• Experience with incident response, threat hunting, and SOC operations.

Being client representative for all Process-related activities and installations

Supporting the E.O in getting the necessary information at the battery limits of the package

Ensuring alignment between equipment suppliers and client Specification and Guidance

Reviewing design and technical documentation

Following-up construction & all testing activities falling under the package' scope

Ensure systems start-up and punch list solving

Provide projects support in terms of technical expertise, contractors' management and troubleshooting capabilities.

Facilitating handover process towards the end user

Review documents for ITT process & contractors' selection

Detailed design studies review with contractors, including follow up of yellow reviews, functional specifications, piping and vessel design, 3D-model

Works supervision, Walkdowns performed, FAT, SAT, IQ, OQ + punch list follow-up

Provisional and final acceptances

Final handover for process packages and systems.

Experience in the Bio-Pharmaceutical industry

Perform his/her work in an EHS and cGMP high-demanding environment.

Chemical or Process engineering degree is required.

10 years of experience in the field of Bio or Vaccine Process engineering is required, ranging from early design to facility start-up.

Deep knowledge of commissioning and qualification of similar production trains is a must.

Experience with Centrifugation and Ultrafiltration systems is a must.

• Good degree in Civil / Structural Engineering from a recognized University
• Minimum 5 years working experience in Civil & Structural Consultancy Firm
• Experience in Underground & Bridge structures would be advantages
• Ability to work independently
• Candidates without the relevant working experience but with good academic results may be considered

Job Description

This is a client facing / delivery role, working on cloud operations in the delivery team. You will execute daily cloud operations as well as cloud implementations in technical customer engagements including basic operations and administration, specific implementation projects and/or pilots in Cloud.

The ideal candidate will have experience in delivery roles and success in implementation discussions, hands-on experience with good client handling skills and good team player within the team. The candidate should also be able to provide solutions and technical expertise to fellow team members and in client accounts.

Responsibilities

• Apply technical knowledge, hands-on and customer insights to operate and administrate a cloud infrastructure
• Ensure all configuration conforms to high levels of performance, security, scalability, maintainability, and appropriate reusability and reliability upon deployment, aligning to design documentation specifications
• Ability to codify or implement/deploy configurations with the principles of automation by default in new projects with proper documentations will be advantageous
• Ability to codify or maintain cloud systems in an automated fashion using tools like Ansible, CloudFormation, Terraform etc with proper documentation will be advantageous
• Participate in Cloud Migrations for VMs using tools like CloudEndure, Azure Migrate with more than 20 VMs migration or Databases would be preferred
• Collaborate with team members to engage clients in operational meetings, discussions, process betterment and contribute to optimisations for the client’s environment
• Maintain technical skills, certifications and knowledge of market trends and competitive insights; collaborate and share with the technical community specifically in the cloud space
• Ability to resolve issues with proper resolution/documentation technically and SLAs is required for this role

Qualifications

• Professional Experience - 3+ years of success in operational/administration and deployment/migration projects in Cloud Environment
• Problem Solving. Ability to solve customer problems through cloud technologies
• Collaboration and Communication. Acknowledged helping to provide solutions to issues collaboratively, resolving conflicts and ensuring follow through with proper follow up and closure.
• Technical
  Strong technical experience with cloud infrastructures, migrations, and technology management preferred
  AWS Solution Architect Associate Certification will be advantageous.
• AWS Cloud Practitioner Certification or Azure Certified Administrator or Fundamentals is required
• Subject matter expertise in one or more of the following:
• Competitive Landscape. Knowledge of Containerisation technologies eg EKS/AKS/GKE/K8s/Openshift/Tanzu would be advantageous

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

General information

As a Service Engineer, you will be responsible for executing Service work with low to medium complexity according to work instructions and in accordance with ABB standard processes, quality standards and safety guidelines.

Reporting to Service Manager, you will be delivering quality customer service to satisfy customers. In close co-operation with customer and other ABB teams, take actions to identify new Service business opportunities for ABB.

Health and Safety

• Apply safety rules and safe practices as well as environmental responsibilities
• Report unsafe practices and incidents

Service Delivery

• Execute after sales business activity preventive & condition based maintenance, trouble-shooting, repairs and commissioning.
• Actively coordinate with operation supervisors for optimal service potentials from regular customer interactions.
• Proactively involve in self learning and practical exposure for continuous competence and productivity improvement.
• Maintain high level of personal leadership on safety and quality on work performed as well as documentations.
• Reports early any technical/contract/quality/program/cost issues to management, along with recommendations for resolution.

Additional Requirement

• Understand customer needs & manage customer relationships
• Co-operate actively with other ABB units to achieve common targets
• Support sales team

Leadership

• Provide leadership and coordination for the service team
• Create and develop good team spirit

Continuous improvement

• Proactively identify area of improvement eg. Self-technical knowledge, job safety and etc
• Participate in discussion, meeting, training and e-learning

Your background

• Diploma, ITC or equivalent in Electrical/Electronics engineering with at least 3 years hands on repair and service experience on electrical equipment.
• Experience on LV & MV VFD will be an advantage
• Strong electrical or electronics engineering fundamental knowledge. Knowledge on theory, structure, application, testing methodology and component fault diagnosis/analysis will be added advantage.
• Strong self-discipline with initiative and learning spirit with positive attitude, team work and responsibility.

EMQ2 is seeking a highly qualified Software Development Engineer to join our team and work on projects that impact the lives of many. Our products, including Enterprise Login, Payment Gateways, and Training and Learning Management Systems, are used by over 1,000,000 users. We're looking for passionate professionals to grow and learn with us. If you have more experience, you may be considered for a senior role.

You will be

As a developer on our team, you will have the opportunity to work with the latest technologies and take on challenging projects that will both test and reward your skills. In addition to working on projects that align with your passions and helping you grow as a developer, you will play a key role in the design and implementation of high-quality software systems. Collaboration is a crucial aspect of this role, as you will work closely with other engineering teams, product management, and QA/DevOps to ensure that our products meet the needs and expectations of our customers.

By actively participating in and providing feedback on internal practices, you will also help to drive our commitment to continuous improvement and excellence. This may involve suggesting new ideas or approaches, or providing constructive feedback on current processes. We believe that by constantly striving for excellence, we can provide the best possible products and services to our customers.

Ideally, should have

• Strong communication skills to work with clients and team members
• Passion for learning and growing as a developer
• Grit and determination to overcome challenges and strong problem-solving skills to solve complex problems
• Ownership of work and desire to deliver high-quality solutions
• Capable of understanding the business requirements, working closely with customers, product management, and engineering to develop customer-centric solutions
• Experience in Agile Software Development Methodologies or at least theoretical knowledge and classroom experience
• Experience in Software Development and Design with frontend technologies like ReactJS, NextJS, VueJS or React Native
• Experience in Source Control Management (SCM) tools such as Git
• Experience with web services and RESTful APIs
• Ability to work independently and collaboratively as part of a team in a flexible and fast-paced environment

It would be a plus if you also have:

• Experience working with Design Language System, design patterns and tokens
• Experience in using Continuous Integration and Continuous Deployment (CI/CD) tools
• Experience in backend technology stack like Java Springboot, ASP .NET or NodeJS
• Experience in using and developing with SQL databases (e.g. Microsoft SQL, MySQL)
• Experience in using and developing with Docker
• Experience in using and developing with Amazon Web Services (AWS)

Our Benefits:

• Competitive remuneration package
• Flexible work schedule and remote work options
• Career progression opportunities
• Medical Insurance Coverage
• Open & Transparent Culture with a flat hierarchy

How to Apply

Interested candidates, please send your resume to [email protected]

Our Recruitment Process

After submitting your resume, we will personally review it and invite qualified candidates to take a technical test. The test should take no more than 60 minutes and will be based on the skills required for the position.

If you pass the test, you will be invited for a technical interview with the hiring manager. The interview will be a 60-minute session where we will discuss your experience and knowledge in the field.

Based on the outcome of the interview, the hiring manager will decide if you are suitable for the position. If that's the case, our HR team will contact you with an offer and the next steps.

• Generate new clients and maintain existing clients
• Arrange for zoom/appointments to introduce company with sales presentation
• Handle customer’s enquiries
• Liaise with internal and external departments to ensure client’s requirements is met
• Prepare costing, tenders, proposals and quotations
• Maintain updated record of business transactions with clients and suppliers
• Responds to client’s complaints and feedbacks
• Provide after sales/technical support to clients
• Refer technical issues to Engineer Specialist if it is beyond the current team’s expertise
• Ad-hoc duties as assigned

Requirements:

• Proficient in MS Office Applications
• Min. 2 year of related work experience
• Working Hours: Mon-Fri (8.30am – 5.30pm)
• Location: Tagore
• Salary: up to $6000 + Transport Allowance + Mobile Allowance
• Able to start work immediate or on short notice

How to apply:

Interested applicants kindly state your expected salary, last drawn salary and starting date.

We regret to inform that only shortlisted candidates will be notified.

Log on to www.e-cruitteam.com.sg for more job opportunities!

EA Personnel: Teo Kai Xin, Joey

EA Reg ID: R23114229

EA Licence No.:19C9603

Responsiiblitiies:

• Responsible for the Software Test design and execution for the applications under test.
• Work closely work with the QA Manager, Business/Functional Analyst and Project Manager through the Project Life Cycle.
• Able to perform defect reporting and verification of the fixes.
• Effective Communication with strong interpersonal skills and good analytical, problem solving skills.
• Conduct Test Readiness Review (TRR) to ensure readiness of the test phase.
• Experience in API testing using postman.
• Knowledge of SQL and scripting.
• Hands-on experience and expertise with test management tool.
• Development /scripting skills in programming languages which are compatible for Selenium WebDriver such as Java/C#/Python.

Requirement:

• Bachelors degree in comuter science or equivalent
• Possess 3 to 5 years of experience in Funcational / Automation testing
• Experience in Software Development Life Cycle Process (SDLC) , Software Testing Lifecycle (STLC) ,Test Methodologies and defect life cycle.
• Knowledge and experience in analysing Software Requirement Specification and identifying and creating the required test scenarios, test cases, test data and document traceability matrix to ensure sufficient test coverage.
• Experience in executing test cases and test plans to support the quality assurance activities throughout the software lifecycle.
• Healthcare domain knowledge.
• Experience in testing mobile apps.
• Experience in Automation of Web Applications.
• Good Knowledge in using Version control Management tools such as Bitbucket, GitHub and sound understanding of the code review process.

Shortlisted candidates will be offered a 1 Year Agency contract employment.

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

• Develop, test, and debug automated tasks (Apps, Systems, Infrastructure)
• Have a solid technical skill with diversity of thought and creative solutions that are in the best interests of our customers globally.
• Lead and participate in performance tests; identify bottlenecks, opportunities for optimization, and capacity demands.
• Troubleshoot priority incidents, facilitate blameless post-mortems.
• Work with development teams throughout the software life cycle ensuring sustainable software releases.
• Perform analytics on previous incidents and usage patterns to better predict issues and take proactive actions.
• Adhere to firm-wide architecture standards, risk management and security policies.
• Team player and ability to work in Global Team setup, product owners and business team to develop, build & support application.
• Communicate and collaborate on development items with global team, as well as raise/work to resolve issues impacting development.
• Participate in quality assurance, peer reviews and code reviews Qualifications.
• Build processes supporting data transformation, data structures, metadata, dependency, and workload management.
• Good understanding of networking protocols and cybersecurity best practices in public cloud environment
• Advanced working SQL knowledge and experience working with RDBMS, Hadoop, and NoSQL DB.
• Experience performing root cause analysis on internal and external data and processes to answer specific business questions and identify opportunities for improvement.
• Build processes supporting data transformation, data structures, metadata, dependency, and workload management.
• Working knowledge of message queuing, stream processing, and highly scalable ‘big data’ data stores.
• Experience supporting and working with cross-functional teams in a dynamic environment.
• Strong understanding of DevOps practices, tools, and techniques and experienced deploying application in a containerized environment using Docker/Kubernetes/PCF/Openshift/AWS etc.
• Hand-on experience with cloud-based technologies and tools especially in deployment, monitoring and operations, such as Prometheus, Splunk, Elasticsearch, Grafana

Founded in 2006, IGG is a leading global mobile games developer and publisher committed to making amazing innovative games for players all over the world. Our games are available in 23 different languages, and are enjoyed by 38 million monthly active users from over 200 countries and regions.

At IGG, we are innovators at work, gamers at heart.

We are currently looking for a Server Programmer to join our energetic team in Singapore!

Job description

· Work on server or network related tasks that include but not limited to mobile game server architecture design, modular design, game server end program logic development and maintenance efforts

· Develop game services and supporting applications

· Assess, develop, test, debug, and maintain game services

· Propose creative solutions to meet product goals

· Work effectively in cross-functional teams and collaborate with internal and remote teams to identify, produce, and deliver tasks on time

Job requirements:

· Degree in Computer Science or related field

· 3+ years’ experience in the mobile games industry or equivalent

· Experience with all phases of product development lifecycle, including requirement definition, development, testing, releasing of product(s) and live operations

· Expert in C/C++ is a must, familiarity with C++ as server framework is a plus

· Expert on network protocols: Socket programming, TCP, UDP, HTTP

· Solid understanding of distributed systems and micro service development (SOA, SaaS)

· Expert on SQL and relational database operation

· Preferably with understanding of Unity game engine and C#

· Preferably with Git-related experiences

· Preferably with solid understanding of functional and reactive programming

· Preferably with experience in developing mobile games (iOS & Andriod)

· Familiarity with client server data synchronization (e.g. state/frame synchronization) is a plus

· Familiarity with Golang, protocol buffers would be a plus