Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

We are looking for multiple seasoned Senior and Staff System Engineers to grow an Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

Deliveries:

• Neural Network Processor (NPU) architecture, programming Model, simulation, verification, profiling and optimization
• Specification, review and verification of other IP blocks
• FPGA images and IO boards for pre-silicon verification and design exploration
• Boot ROM, bare metal BSPs, sample applications

Responsibilities:

• Support Inference Engine, Toolchain and ASIC teams on NPU
• Constantly improve productivity through automation in all areas

Skills:

• Strong ANSI C bare-metal design, implementation, optimization and debugging using GCC-like toolchains
• Strong processor architecture knowledge: ARM/RISC-V ISA, symmetric multiprocessing, cache architecture, SIMD, Vector Processing, custom instructions
• Strong software, hardware and FPGA debugging capability
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc
• Familiarity with

o Python for prototyping, demo, verification and/or automation

o OS: GNU/Linux, proprietary RTOS, Bare metal

The following will be advantageous:

• Detailed and comprehensive understanding of TinyML (e.g. TensorFlow Lite for MCUs), from training, quantization through to operator execution, optimizing for power, performance, and size.

Requirements:

1. Ph.D/MSEE/BSEE in Electrical Engineering, Computer Science or Computer Engineering
2. At least 5 years of commercial embedded system architecture and development experience.

The Air Traffic Management Research Institute (ATMRI) is the first institute in Singapore to be entirely dedicated to Air Traffic Management research. As part of its agenda for innovation, it is seeking to recruit a Research Engineer to work on the AI-Assisted ATFM project, to deliver an operationally ready prototype of an AI enabled ATFM system. This job will be responsible for contributing to the research transition into development, by documenting existing AI tools, including those designed by ATMRI researchers, and integrate them into operational software development.

Key Responsibilities:

• Interpret research papers and program, for conversion into applicable software development. Develop a vision for transforming research papers into technologies ready for deployment.
• Design and develop the front and backend of the applied research, for operational use. Work closely with the researchers and stakeholders to design a user-centric, ready for development software that emphasizes the benefits for end-users.
• Rigorously document every aspect of the software development, for integration into industrial development.
• Participate in meetings and workshops with fellow researchers and stakeholder partners to discuss the future directions for research and development.

Job Requirements:

• Bachelor / Master of Engineering in Computer Science or a related field.
• Impeccable English writing and communication skills
• 1+ year experience in industrial software development
• Experience in the development of APIs, UI, authentication and actualization systems, with proficiency in several programming languages (Python, Java, C++…)
• Industrial or operational prior experience in air traffic services is a plus.

We regret that only shortlisted candidates will be notified.

Job Description & Requirements

Responsiblities :

1. At least 2 years IT Service Desk experience or,

2. At least 1 year in IT Remote Support experience or,

3. At least 1 year IT Onsite/Desktop Support Experience

• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

Job Description & Requirements

1. At least 2 years IT Service Desk experience or,

2. At least 1 year in IT Remote Support experience or,

3. At least 1 year IT Onsite/Desktop Support Experience

• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

• Tuas Naval Base
• Up to $4000 + Bonus (salary based on experience)
• Direct Contract
• Training Provided

Responsibilities:

• Work on delicate Radar System for preventive and corrective maintenance on sites.
• Execute maintenance tasks within the committed TAT, Ops availability and good quality
• Liaise with customer for maintenance activities
• Perform maintenance activities and ensure tasks are performed accordingly to requirements
• Monitor and activate replenishment of consumables at reorder level
• Schedule and perform calibration of tools and equipment
• Provide inputs and prepare documentation required to complete job
• Manage inventory of authority furnished spares
• Perform housekeeping
• Response to customers’ requirements

Location: Tuas Naval Base

Working Hours: Mon – Fri, Normal Office Hours (Standby Required)

Salary Range: $3,000 - $4,000 + Bonus

Requirements:

• Min Nitec in Engineering in Electronics or equivalent
• Knowledge of EO/Radar maintenance experience would be advantageous
• Able to perform 24/7 stand by
• Physically fit and able to lift heavy loads
• Able to work at height and do not have height phobia
• Good team player and yet able to work independently.
• Valid Class 3 driving license would be advantageous.

If you are interested, please submit your application here.

Thank you for your application and we regret that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to P-Serv Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.p-serv.com.sg/priv.... You acknowledge that you have read, understood, and agree with the Privacy Policy.

P-Serv Pte Ltd

EA License No: 90C3494

Uma Maheswari | EA Personnel: R2092012

You may also reach me at 81278347 for further information.

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

• Perform first level troubleshooting on all reported incidents and escalate incidents to 2nd level resolver groups as per work instructions
• Provide First Call Resolution (FCR) technical support
• Troubleshoot and investigate cause of user’s problem
• Update work information with all troubleshooting steps used in the ticketing system
• Set Incident to “Resolved” if User’s problem has been solved
• Reassign ticket if agent is unable to resolve ticket

Quantity Surveyor

• Secure new contracts / projects, administer all project contracts
• Prepare tender and contract documents including bills of quantities;
• Undertake costs analysis for all project trade works;
• Establish client’s requirements and undertake feasibility studies with project team, perform value management and cost control;
• Execute procurement strategy and propose refinements / improvements;
• Identify, analyze and develop responses to commercial risks;
• Prepare and analyze costing for tenders;
• Analyze tender outcome and prepare detailed reports for review;
• Allocate work to subcontractors;
• Evaluate completed work and arrange payments;
• Monitor Gebiz, SESAMi, newspaper notices and other platforms for private and public tender and quotations;
• Maintain awareness of the current building contracts;
• Ensure compliance with relevant ISO and company standards or objectives;
• Keep abreast of relevant regulations such as Security of Payment Act (SOP), etc.

Project Engineer

• Coordinate with clients / main contractor, architect, consultants, suppliers and subcontractors;
• Conduct preliminary surveys of the construction site;
• Responsible for submission of technical drawings, work schedules and samples for clients / main contractor's approval;
• Undertake structural analysis, calculations and prepare design sketches and drawings indicating arrangement and design intent for a variety of building structures;
• Review and check shop drawings and built drawings;
• Attend site meetings with owners / subcontractors;
• Responsible for overall aspects of the management of subcontractors;
• Plan, work, schedule and delivery of equipment and materials to site;
• Responsible for monthly progress claims and project costing;
• Raise material requisition for local material ordering
• Ensure that all formalities such as permits and clearances are obtained from respective government agencies;
• Work closely with Consultants, Regulatory Authorities and Contractors, to provide planning, design and supervision to solve site matters and timely completion of the projects;
• Take part in the project plan and give inputs regarding implementation;
• Coordinate and manage Sub-contractors and Supervisors on site to ensure all works comply fully with regulatory and Client’s requirements;
• Update progress of construction work to Project / Site Manager
• Keep in touch with designers, architects, consultants and suppliers to ensure that construction is on schedule;
• Ensure implementation and sustaining of construction quality and safety programme;
• Prepare Method Statement, Risk Assessment and Safe Work Procedure;
• Process suppliers and sub-contractors (progress) claims;
• Ensure compliance with time and money constraints or budgets for projects; with relevant QMS, OHSAS, EMS and company standards and policies.

JOB REQUIREMENTS:

• Preferably Degree in Quantity Surveying or Engineering (Civil / Structural / Construction)
• Process relevant skills in MS Office, AutoCad, Microsoft Project
• At least 3 years working experience in the related field preferably min. 2 years experience in Building Construction specializing in Quantity Surveying or Engineering in Civil / Construction / Structural
• Good communication skills in both oral and written English and has the ability to liaise effectively with other professionals, e.g. clients / developers, main contractors, construction managers, quantity surveyors, subcontractors, architects, designers, other engineers, consultants, suppliers, etc.
• Possess excellent negotiation and coordination skills and able to work in fast paced environment

Kindly indicate the following information in your CV.

• Current / Last Drawn Salary (in SGD)
• Expected Salary (in SGD)
• Availability
• Residency Status in Singapore

We regret only shortlisted candidates will be notified.

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Deploy, administer, and support database and data lake infrastructures.
• Formulate and execute plans for high availability, backup, recovery, and disaster preparedness.
• Diagnose and resolve database issues and optimize performance.
• Enforce industry-standard security measures, policies, and best practices.
• Enhance clients' data warehouses and data lakes, and maintain comprehensive documentation.

Requirements

• Proficiency in Database Administration.
• Experience with Linux operating systems and scripting.
• Practical experience with at least one of the following: Hadoop Distributions, Relational Databases, or NoSQL Databases.
• Advantageous knowledge in one or more of the following areas: Data Virtualization tools, Scripting languages, Cloud platforms, and Docker/Kubernetes environments.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Deliver project milestones, install hardware/software, and troubleshoot issues during implementation.
• Draft and execute Statements of Work (SOW), coordinating issue resolution with external parties.
• Participate in System Acceptance Tests, collaborating with vendors and customers.
• Create and update technical documentation, emphasizing clear network topologies.
• Produce SOW, system handover documents, and maintain inventory records.

Requirements

• Proficient in Linux operating systems.
• Well-versed in Networking, Firewall, and Fiber-Optic transmission devices.
• Acquainted with Big Data technologies; preferred background in implementation and system maintenance.
• Advantageous experience in Virtualization.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Set and advance sustainability targets, balancing financial and environmental goals.
• Implement effective reporting systems; collaborate on performance benchmarks.
• Lead sustainability communications; create educational materials.
• Formalize sustainability practices through documentation and reviews.
• Monitor and report on sustainability metrics; conduct audits.

Requirements

• Experience in a related field preferred.
• Knowledged of BCA Green Mark for Data Centre and Buildings, ISO 14001 Environment Management System, SS564 Green Data Centre etc

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Job Description

• Industry/ Organization Type: Manufacturing/ Supply Chain
• Position Title: Facility Engineer
• Working Location: Tuas
• Working Hours: 5 days (Monday - Friday, 8 AM - 5 PM)
• Salary Package: Basic Salary + Transport Allowance ($750) + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintenance of building, facilities, and security at all Company’s sites.
• Coordinate and execute, when necessary, inspection, testing, general maintenance, and repair of the critical site systems and equipment.
• Ensure that all equipment and other facilities are working properly.
• Critical systems and equipment include power/ UPS, backup generator, and fuel supply. HVAC (Heating, Ventilation, Air Conditioning), plumbing/ water supply, security doors/ alarms/ cameras, Fire safety systems and equipment.
• Provide situation/ status updates to the Facility Manager on issues which are to be resolved and the critical system or equipment is fully operational.
• Initiate interventions to solve problems in the facilities and develop a system for cleaning, repair and maintenance of facilities.
• Deliver timely and efficient solutions to facility-related requests.
• Liaise with contractors on maintenance/ repair.
• Supervise contractor on-site.
• Review the risk assessment submitted by the contractor prior to the commencement of work.
• Ensure required safety requirements are in place prior to the commencement of work.

APPLY NOW!!!

• Diploma in Engineering or equivalent
• At least 2 years of work experience in Facility Management
• Possess own transport is an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65726 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

hands on in provisioning aws services which includes sagemaker, aws lambda, defining best practices, monitoring aws services etc.

design and delivery of AWS cloud-based projects, ensuring the creation of scalable, secure, and highly available environments tailored to business needs. • Deployed and managed cloud infrastructure across production, testing, and staging environments using Terraform, facilitating Infrastructure as Code (IaC) practices. • Created significant application solutions within the AWS cloud, optimizing functionality and scalability for diverse business needs. • Implemented AWS Control Tower to streamline the management of multiple AWS accounts, ensuring compliance with organizational governance policies and best practices • Oversee AWS cloud networking, including VPC design, subnet configuration, security groups, and routing, to ensure robust and secure network connectivity. • Collaborate with cross-functional teams to deliver Proof of Concept (POC) projects on Oracle Cloud, validating use cases, performance, and cost-efficiency for potential large-scale adoption.

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
  Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Evaluate design package and prepare shop drawing of RC structural works and temporary works.
• Liaise structural design works with design-relevant counter parties and construction team.
• Design of temporary works related to structural design.
• Lead the project department in solving design related matters.
• Manage production, quality, design & engineering and schedule issue.

Requirements:

• Degree in Civil Engineering or equivalent
• At least 5 years of civil & structural works experience in Infrastructure/LTA Projects.
• Proficient in STADD, AutoCAD, MicroStation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Physical Design Engineer (Digital IC)

Job Description：
1. Works with the senior physical design team to complete the chip floorplan , clock architecture, and powerplan .
2. Involved in one or more physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.
3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:
1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science
2. 0 - 5 years of work experience in the digital backend design field. (Fresh graduates can be considered).
3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.
4. Willing to work in a new start up entity in Singapore

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

Requires a BS in Electrical or Computer Engineering and > 5 years of related experience

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for Software Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Job Responsibilities:

• Design solutions that meet functional requirements.
• Develop end-to-end specifications for solution components.
• Perform testing and implementation of the solution.
• Participate in impact analysis of encountered issues.
• Contribute to continuous improvement of software development best practices in the areas of coding tools, languages and APIs, as well as software design and development processes.

Participate in UX activities such as:

• Conduct user research/interviews
• Develop user stories, storyboards to articulate current and future concepts
• Create wireframes, detailed visual mock ups and interactive prototypes
• Create style guides and digital assets for production

Requirements:

• At least 2 – 3 years’ Software Engineer experience, with strong expertise in at least of the following languages: Java, JavaScript, Python, C#, .Net.
• Good understanding of software development lifecycle processes
• Proficiency in Web Technologies such as HTML, CSS
• Diploma or Degree in any IT discipline or equivalent

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

• To provide onsite technical and troubleshooting services covering below support activities within the required SLA time frame.
• Hardware support: Technical diagnosis and coordination with OEM vendors for repair of defective hardware for a variety of devices including desktops/laptops/workstations, mobile devices, tablets, meeting room equipment, printers etc.
• Software support: diagnosis and resolution of software functionality for both the operating system and standard desktop applications
• IMACD: physical installations, moves, adds, changes, and de-installs for a wide variety of supported hardware devices including desktops/laptops/workstations, mobile devices, tablets, meeting room equipment, printers and etc. and supported software
• Enhanced support for VIP users
• Coordinate with infrastructure teams to resolve issues with network, servers or other infrastructure devices or services that impact the normal work of end users
• Support hardware and software changes (e.g. hardware device change/refresh, system upgrade/migration, patch update, etc.) for end users
• Asset management support for end user devices by following defined processes
• Provide smart hand support for all kinds of hardware such as printers, servers, network devices, backup devices, meeting room equipment, scientific devices etc.
• Onsite support for events such as trade shows or special meetings
• Regular checks for IT Room devices and Meeting Room equipment when required
• Deployment services for large-scale efforts include asset auditing and discovery, project support, image integration, on-site installation, user self-installation, migration, and asset recovery governed with full project status and reporting

Job Requirements

• Diploma / Nitec in Information Technology, Computer Engineering, Electronics or related field
• 1 to 2 years of desktop support experience in Corporate environment
• 5 days work at Raffles Quay
• MNC work environment
• Salary $2700 - $3100

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, Etabs, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

• Singapore Based (Tuas)
• Monday to Friday (8am to 5pm)
• Basic: $3800 to $4300 + site allowances + Transport Allowance
• Joining Bonus
• Bachelor in Chemical Engineering; Min 1 years of process industry experience
• Career Progression Opportunities

Responsible for developing and implementing process strategies, managing process resources, optimizing current processes, and maintaining process documents.

Job Specifications

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement
• and Safety Management

Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown
• To undertake any other assignment given by the Management from time to time.

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279