Job Overview

Candidate will be responsible for improving yield and device performance of automotive chips during production ramp, and high-volume manufacturing.

• Analyze yield, process, diagnostic, and semiconductor test data to ramp production volume, support lot disposition, drive baseline yield improvement, and isolate root causes of yield loss and product performance degradation.
• Support foundry / assembly house on process qualification, test house management, test probe card, load board and tester validation on performance over process and operating condition, debug and release test program into mass production.
• Collaborate with wafer foundries, assembly and test houses and Qualcomm PTE (product and test engineering) team to isolate root causes of yield loss and drive improvements.
• Interface with management and business teams to provide yield outlook for product planning and cost analysis.
• Lead teams and task forces to address and drive resolution of yield excursions.

Minimum Qualifications

- 3+ years experience with ATE test platforms, especial familiarity with Advantest 93K.
- Good understanding of VLSI test techniques.
- Basic understanding of digital/analog functional block and electronic circuits.
- Basic data analysis skills.
- Fluent in English, both spoken and written.
- Proactive working attitude.
- Capable to handle new challenge.

Preferred Qualifications

- Basic knowledge of design for test, design for manufacturing, design for experiment.
- Basic knowledge of reliability test, and quality concept.
- Basic knowledge of foundry process, assembly process, and failure analysis.
- Good experience with yield management software (O+ or exensio)
- Understand yield management, continuous improvement and cost reduction in a high volume fabless semiconductor environment
- Understand test house working model, supply chain and KPI.

- automotive related experience is preferred

JR107699

Roles & Responsibilities

• Review requirements, design, develop, implement and maintain software applications for data acquisition and control systems with OT (including but not limited to OPC UA, BACnet, Modbus) and IT (including but not limited to MQTT, REST).
• Collaborate closely with system engineers and system integrators to ensure seamless integration of software components with existing systems.
• Perform unit testing, integration testing, and system testing to ensure software quality and reliability - benchmark and optimize performance as necessary.
• Create technical documentation, including software specifications, user manuals and test plans, while ensuring good documentation practices.
• Strong team player who is able to communicate well, and excited to lean new technologies in a fast pace environment.
• Stay updated on emerging technologies and industry trends in building automation and IoT.

Requirements

• Minimum Diploma/Degree in automation, information technology or equivalent.
• 3 – 4 years of working experience in building automation industry and relevant industry.
• Possesses strong knowledge on OPC UA, BACnet, Modbus.
• Possesses knowledge on SQLite, PostgreSQL, Python, Linux OS.
• Possesses knowledge on Containerization.
• Work individually or collaborate as a team.
• Require working onsite for project delivery.

#HS

At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world!

The Job Responsibilities:

- Responsible for performing outdoor & indoor repair, maintenance and troubleshooting work

- Where there is no outdoor repair, you are required to work within the Company workshop

What It Takes:

· Degree/ Diploma/ Certificate in electrical & electronic engineering (AC & DC motors, single-phase & three-phase, lead acid & lithium batteries, electrical control circuits, hydraulic system)

· minimum a year of customer support experience

· ability to work as part of a team and possess strong communication skills

· obtained local driving license is a plus

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 24 months
• Start from: End January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of factory OR commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Join our R&D team within Chemtech division in Singapore as Electrical and Instrumentation Technician/Engineer.

Your main tasks and responsibilities:

• The job holder is responsible for the execution of preventive maintenance, troubleshooting, repairs, and maintenance of all pilot plant facility as well as maintaining the calibration program of all instruments.
• Develop electrical and instrumentation systems tailored for ATEX or IEC classified environments. This includes designing control panels, crafting intricate wiring diagrams, and meticulously mapping out instrumentation layouts.
• Oversee the installation, commissioning, and maintenance of electrical and instrumentation systems. Troubleshoot and resolve electrical and instrumentation issues to minimize downtime and ensure safety. Conduct routine inspections and preventive maintenance on electrical and instrumentation equipment.
• Ensure all electrical and instrumentation systems adhere to relevant safety standards and regulations. Participate in safety assessments and develop strategies to mitigate risks associated with electrical and instrumentation systems.
• Maintain accurate documentation of electrical and instrumentation designs, configurations, and maintenance records. Prepare technical reports, drawings, and documentation for internal and external stakeholders.
• Identify opportunities for process optimization and efficiency improvement in electrical and instrumentation systems. Stay updated on industry trends and emerging technologies to recommend upgrades and improvements.

To succeed in this role, you will need:

• Diploma or Degree in Electrical Engineering with relevant experiences in pharmaceutical, chemical or petrochemical industries.
• >7 years for Diploma or 3-5 years for Degree experience in pharmaceutical, petrochemical or flavor and fragrance environment.
• •Hands-on experience in ATEX or IEC environment, preventive maintenance, troubleshooting, repairs, maintenance of automation and equipment, as well as maintaining the calibration program of all instruments.
• Ability to conceptualize and provide design for electrical, instrument and control wiring diagrams.
• Requires skills in analyzing malfunctions in control systems and making appropriate repairs. This includes troubleshooting PLCs, field sensors, control wiring, general I/O wiring, & networks/communications wiring.
• Requires skill in the use of technicians' tools such as electric meters, oscilloscopes, calibration devices, electronic testers, etc.
• Awareness for safe handling of chemicals, potentially dangerous materials and equipment.
• Proficiency in AutoCAD or other relevant design software.

Location: We are based in Cleantech 3 (This role is for our new R&D Test Centre)

Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable

Responsbilities

• Plan and design mechanical engineering works for building services, with a focus on ACMV systems.
• Develop detailed reports, specifications, calculations, drawings, and project documentation.
• Present designs to stakeholders, review shop drawings, and manage material/equipment submissions.
• Handle RFIs and perform contract administration tasks effectively.
• Oversee installation, testing, and commissioning of mechanical systems to ensure compliance with design and quality standards.

Requirements:

• Degree in Mechanical Engineering or equivalent.
• Minimum 7 year of relevant experience in mechanical engineering design. More than 10 year experience will consider for Principal Engineer role.
• Strong knowledge of mechanical engineering design systems and software.
• ACMV expertise is mandatory.
• Candidates with experience in handling government projects will have a strong advantage.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

Work Location: 6 Tampines Industrial Avenue 5 Singapore 528760
Work Day : Monday - Friday, 8.30am - 5.30pm

Responsibilities:

• To lead a team of Engineers to carry out all the Test related activities for Server & Rack products for the production
• To support & implement PXE Server configuration for the products
• Perform & maintain the Server & Rack run-in test process
• Perform & maintain the burn-in & power test process
• To liaise with customer & HQ / factory on the test program implementation and maintenance
• To test and analyze all failures in the production products and work back with customer & HQ / factory for improvement
• Participate in the Kaizen activities
• To update the test program master list & tracking
• To prepare and update Working Instruction
• To provide training over W/I to production
• To support the NPI Process
• To support production on the mass run
• Participate in ISO activities (implementation & maintenance)

Requirements:-

• Min. Diploma in Engineering discipline with min 3 years relevant experience in Server / Rack/ Manufacturing environment
• Ability to work with the customer, HQ / factory, Peers / Subordinate and Superiors
• SAP & Linux knowledge
• Able to multi-task & work under pressure
• Good understanding of test methods and concepts
• Knowledge of programming and debugging skills

Compliance with RBA standards

As a technical support engineer, you’ll be part of a global team whose main focus is ensuring that Wise API integrations get an industry-leading level of assistance when they need it. You’ll work with Wise Platform enterprise partnerships and business payouts customers, Open Banking providers, and self-onboarded API users. They all depend on rapid and dedicated support: from general questions about the behaviour of an API or webhook, to acting as a first-responder for a major incident.

What you'll be doing:

• Develop a deep expertise in the Wise API products and capabilities, and solid understanding of how Wise Platform partnerships have integrated with the solution. You’ll collaborate with teams across the Wise Platform and Open Banking products to do that.

• Support the team to help contacts across all channels, primarily over email in our support queues, and also by phone in the case of critical issues for a partnership.

• Contribute significantly to troubleshooting and solving issues users report, both independently and collaboratively with engineering and commercial teams in Wise.

• Enable the rest of the team to support API users globally, by sharing and capturing knowledge and trends on the issues users are raising.

Job Highlights
Career progression opportunities.

Guidance by Experience Engineers to develop holistic competencies.

OJT training on company operational and management processes.

Develop management skills.

Job Description

• Civil & Structural Engineering Design.
• Fire Safety, Pollution Control and Singapore Statutory requirements design.
• Project execution & management.

Responsibilities

• Civil & structural and other engineering design
• Manage or support design teams.
• Project co-ordination or management.

Job Requirements

Civil Engineering degree that is registerable as a Singapore Professional Engineer preferred.

Candidates with BIM knowledge/experiences will be an advantage.

Additional Requirements

• Effective communicator and motivated.
• Have broad vision and good sense of reality.
• Proactive and takes full initiative.

Years of Experience

3 years experience preferred. (New graduate will also be considered)

Duties and responsibilities:

1. Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

2. Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

3. Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

4. To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

5. Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

6. Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

7. Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

8. Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

9. To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

10. To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

11. To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

12. Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

13. To be actively involved with quality management system of the company.

14. Perform any other duties as assigned by higher management or superior.

Your role:

We offer you an exciting SME role in our Singapore based SRE team where you will have a combination of production responsibilities and hands-on DevOps deliveries.

• Gain a strong technical and business focused understanding of UBS Wealth Management CRM environment
• Manage the relationship with the development teams and self-drive the SRE driven toil elimination and tooling initiatives
• Manage the CRM systems regionally, from dev environment to production
• Crisis/Incident Management, escalating with appropriate urgency. Ensuring team follow the prescribed incident & problem management
• Identify and drive efficiencies in support and development tasks, enabling all teams to be more effective.
• Grow the internally built operation tool (JavaScript/Python) to reduce toil or shift left procedural tasks
• Drive a best-in-class Observability platform leveraging the Grafana stack
• Work with development managers to reduce the support profile of existing applications and help design and deliver more stable solutions. Drive the resolution of recurring issues at a systemic level

Your team:

You’ll be working in the Client Service Data Crew (Stream Be a Client of UBS) in Singapore. We provide an agile working environment with training and exposure to a wide range of the latest technology and development tools. As a Java Software Engineer, you’ll play an important role in ensuring UBS requirements. As part of the Client Service Data Crew (Stream Be a Client of UBS), our teams design, deliver and operates of-the-art systems that offer best-in-class services to the bank’s clients.

Your expertise:

Contribute to provide a state-of-the-art CI/CD toolchain for modern software engineering, which is part of our DevOps platform. Help to support our agile programs and software engineering teams to efficiently delivery valuable and high-quality solutions and changes to our business.

The appropriate candidate delivers the following profile:

• Strong exposure on Core Java, Spring, Spring boot, REST APIs and Microservices
• Experience with enterprise integration and messaging related technologies such as JMS, MQ and/or Kafka
• DevOps mindset. We believe in DevOps and DevOps by developers. If you share the same passion, it is a good add-on
• Interests in monitoring, support technologies such as, AppDynamics, Splunk is an added advantage
• Deep understanding of all aspects of application development and SDLC methodologies – agile & waterfall
• Agile, Test Driven Development and DevOps practices part of your DNA
• Solid design, coding, testing and debugging skills.
• Ensure compliance with the defined standards and guidelines by the agile programs and software engineering teams when using the CI/CD toolchain and services

About RDA

Passionate about innovating and creating the frontier in data centre industry? Join our team to unfold the future of data centre operations!

Red Dot Analytics specialises in developing cognitive digital twin solutions to transform data centre operations and management, towards smarter decisions and a sustainable future. You will be at the forefront of this fast-growing industry that is concreting the foundation of AI and digitalisation wave – your next great opportunity is just a few clicks away!

Job Summary

We are seeking a Digital Twin Engineer to join our team. In this role, you will contribute to the development and application of cutting-edge digital twin technologies for data centers. By integrating modeling, simulation, and analysis, you will help drive innovation in optimizing data center operations. This position is key to our vision of promoting sustainability and efficiency in the industry. You will collaborate with diverse teams to deliver impactful solutions and ensure project success.

Responsibilities:

· Analyze and process HVAC design data for data centers, focusing on cooling systems and airflow management.

· Develop detailed digital twin models using in-house platforms for visualization and simulation, incorporating calibration to ensure accuracy.

· Conduct simulations to evaluate energy efficiency, thermal dynamics, and airflow optimization to identify areas for performance improvement.

· Provide actionable insights from simulation results to optimize system performance.

· Prepare comprehensive analytical reports that detail findings, optimization strategies, and key performance metrics.

· Leverage data analytics to identify trends, detect anomalies, and uncover opportunities for enhanced performance during project execution.

Requirements:

· Diploma, Bachelor's, or Master’s degree in Mechanical Engineering, Computer Science, or a related field.

· Knowledge of HVAC system, such as chiller plants, cooling towers, and airside cooling, is a strong plus.

· Experience with CAE (Computer-Aided Engineering) or CAD software is desirable.

· Familiarity with BIM (Building Information Modelling) tools is an advantage.

· Proficiency with digital twin technologies is highly desirable.

· Ability to analyze complex simulation data and extract actionable insights.

· Strong written and verbal communication skills to present technical findings clearly and effectively.

· Detail-oriented, proactive, and adept at managing multiple tasks in a dynamic work environment.

· Prior experience in digital twin development, data center projects, or related fields is a significant advantage.

ABOUT

As a leading financial software company, NeoXam delivers data management and transaction software solutions to financial institutions located in Europe, America, and Asia Pacific. Every day, NeoXam helps to process more than $14 trillion worth of assets for over 10,000 user accounts across the globe.

Headquartered in Paris, NeoXam expanded its business to China in 2009 and established Singapore’s office in 2017 (now APAC HQ). Supported by over 600 employees globally including 80 staff in APAC, the company continues to grow and is looking for local talents to join our Singapore’s office to pursue this rewarding journey through an internship which would lead to a working contract for the best performers. Candidates will have the opportunity to join a multicultural dynamic team working in an entrepreneurial spirit on one of the best worldwide multi-awarded Data Management and Investment Book of Record solution (Datahub) used by the largest financial institutions globally.

JOB DESCRIPTION

NeoXam Singapore is looking for an experienced and motivated Neoxam Datahub Software & Application Manager who will lead the team working on Enhancement and Support of NeoXam Datahub Entity Master. This role will be based in Singapore, working closely together with the NeoXam project team.

He / she will join a team of experienced consultants and participate in the implementation and support of the application, the installation of new modules and features using NeoXam DataHub: the most comprehensive, efficient and customizable solution for centralized data management available on the market. The solution acts as a hub, a central repository and a user-oriented data management tool for data used or produced by financial institutions.

MISSION & MAIN ACTIVITIES

• Lead the team working on Enhancement and Support of NeoXam Datahub Entity Master
• Writing and implementing modified codes to meet client’s requirement
• Developing quality assurance procedures
• Working closely with Research & Development (R&D) team on the improvements of NeoXam software solutions
• Implementing and managing NeoXam Datahub software
• Test and evaluate the success of software implementation
• Run analysis on installation and implementation problems to identify and resolve technical issues within the established time frames to meet clients’ satisfaction
• Identifying areas which requires modification in existing programs and subsequently work with R&D team on these modifications
• Provide best practice guidance to clients by leveraging technical expertise, NeoXam software knowledge and industry experience
• Ensure coordination and responsive follow-up to client needs and requirements, interfacing with the appropriate NeoXam departments and colleagues as needed
• Communicate NeoXam’s offerings and identify new opportunities to grow
• Participate in support efforts
• Continuously keep up to date with NeoXam DataHub functional and technical features and improvements
• Identify and resolve any installation and implementation problems to the clients satisfaction within established time frames
• Manage the overall design and configuration activity by ensuring the team follows configuration / scripting / design guidelines
• Analyze the clients’ needs, accompany and coach their teams and/or take charge of the product implementation, meet clients’ requests, manage the client relation and coordination of the project

PROFILE

• Engineering Bachelor Degree / Master’s degree or equivalent
• Minimum of 4 years of successful implementation and support of NeoXam Datahub solution at customers worldwide
• Minimum 8-10 years of experience with Financial software implementation and IT Projects in the banking / financial industry.
• Strong analytical and problem solving skillsExperience of a development language (Java, C, C++…) is required to be capable of writing rules in scripting language
• Experience with RDBMS, Data Modeling, and SQL language
• Understanding of Enterprise Data Management and ETL techniques and processes
• Previous experience of financial data provider feeds such as Bloomberg, Refinitiv, ICE and others
• Knowledge of financial instruments such as Equities, Fixed Income and Derivatives
• Previous project experience with involvement in multiple stages of the project life cycle
• Independent, with own initiative and good interpersonal skills and are concerned about the quality of service provided
• Proactive and a real team player
• Fluent in English

WE OFFER

• Competitive compensation
• Excellent medical, dental and maternity coverage for you and your dependents
• Life insurance, allowance
• A co-working space filled with multinational companies / startups / entrepreneurs, located next to Raffles Place MRT
• A collaborative, collegial and fun-loving office culture
• An exposure to diverse technical and functional areas

At NeoXam, we love people who are curious, involved and self-driven, who like to propose solutions and for whom it is essential to continue to learn and grow on a daily basis.

The position requires rigour, tenacity and a good ability to communicate and promote best practices.

Review lac scripts and be involved with the solutioning team's discussions to provide feedback and validate improvements

Be involved in DevOps and Security domain discussions as part of your scope Design and implement infrastructure automation solutions using Terraform to manage cloud-based and on-premises environments.

Develop and maintain CI/CD pipelines to automate software deployments, infrastructure provisioning, and configuration management.

Conduct regular code reviews, perform testing, and maintain documentation to ensure the reliability and repeatability of infrastructure deployments.

Troubleshoot and resolve issues related to infrastructure automation, ensuring minimal downtime and optimal system performance.

Act as a hands-on technical advisor, mentoring peers and providing technical guidance on best practices for infrastructure automation and DevOps processes. Design and implement automation improvements to support large scale Linux, Windows, SAN storage, and virtualization environments (e.g. VMware) Perform provisioning and automation enhancements via scripting (e.g. Bash and Python) and centralized management tools.

Experience and skills requirements

Experience

Proven experience (3+ years) as an Infrastructure Engineer, DevOps Engineer, or similar role focused on infrastructure automation and laC.

Experience in adopting cloud security tools like Azure Security Centre, Sentinel

Good understanding of cloud security and solutioning concepts to get up to speed on design discussion

Expertise in using Terraform to manage cloud-based environments (e.g. AWS, Azure).

Strong proficiency in scripting and programming languages (e.g. Python, Bash, PowerShell) for automation and configuration management tasks.

Experience supporting virtualized environments on centralized storage, (e.g. Nutanix, VMware vSphere).

Certification

Bachelor's degree in Computer Science or a related field, and at least 5+ years of relevant work experience.

Added advantage with the following:

Good understanding of networking concepts, security best practices, and infrastructure architecture.

Strong operating systems management skills, with a proven background in Linux (RHEL/CentOS) administration, Windows administration experience a plus Tenacity to persevere and meet challenges head-on during project implementation Inquisitiveness to assess and understand the latest cloud technologies and features Excellent analytical and problem-solving skills, with an eye for detail

Strong ability to juggle multiple projects and work closely with various key stakeholders

Team player who is comfortable working in a highly collaborative environment and excellent customer service.

We are looking for an experienced Electrical Engineer to join our Singapore team. The ideal candidate will possess the necessary technical skills and expertise to ensure the flawless commissioning of mechanical, electrical, and plumbing systems in various construction projects.

Role & Responsibilities

Design:

· Understand the project requirements and coordinate with Arch, Civil, MEP team, and Client across all the stages

· Designing complete Electrical Systems of a project

· Preparation of Electrical system design calculations and schemes

· Preparation of electrical BOD, BOQ, Cable schedule, Load estimation, and Quantity estimation

· Design of Lighting, Power, cable tray, Earthing, and Equipment layouts

· Calculations such as load calculation, Transformer / DG / Capacitor Bank sizing, Cable Sizing / Schedule / HT / LT Cable sizing, Tray Sizing, Lighting Calculation, Short Circuit Calculation, Earthing Calculation, and Lightning protection

Testing & Commissioning:

· Witness and report on Factory Acceptance Testing (FAT)

· Inspect and report on construction installation quality

· Attend and witness Testing and Commissioning activities during construction phase on site

· Review design drawings and documents from a commissioning perspective

· Attend and contribute to commissioning meetings with Client and Contractors

· Assist with development of Integrated Systems Testing (IST) plans and scripts

· Participate in IST on site

· Assist with weekly and monthly reports on commissioning progress

· Review vendors O&M Manuals and training plans

Qualifications And Skills

· Degree in Electrical Engineering or similar field of study

· Good understanding of electrical systems design

· 4 to 7 years’ experience in either design consultancy or electrical equipment vendor or electrical contractor

· Experience working on buildings construction projects

· Experience in Data Centres projects would be advantageous

· Familiarity with data centers infrastructure and ensuring the proper integration of MEP systems

Infrastructure Management:

• Deploy, configure, and manage cloud resources using infrastructure-as-code (IaC) tools such as Terraform or CloudFormation

• Monitor and maintain cloud infrastructure to ensure optimal performance, availability, and security.

• Implement automation and orchestration to streamline deployment and scaling processes.

Cloud Services Administration:

• Manage and administer various cloud services, including compute instances, storage solutions, databases, networking components, and serverless offerings hosted on AWS and Azure.

• Optimize resource utilizations to ensure efficient cloud service delivery and cost management.

Monitoring and Incident Response:

• Set up monitoring and alerting mechanisms to promptly identify and address performance issues and security vulnerabilities.

• Collaborate with the incident response team to troubleshoot and resolve operational incidents, ensuring minimal service disruption.

Security and Compliance:

• Implement security best practices to protect cloud environments from potential threats and vulnerabilities.

• Assist in conducting security audits and assessments to maintain compliance with industry regulations and standards.

Collaboration and Documentation:

• Collaborate with cross-functional teams, including DevOps, development, and security, to understand requirements and align cloud infrastructure accordingly.

• Maintain comprehensive documentation related to cloud infrastructure, processes, and procedures.

Requirements / Qualifications

• Atleast 5 years of working experience in cloud operations, managing cloud-based infrastructure, and deploying cloud services.

• Proficiency in cloud platforms such as Amazon Web Services (AWS) and/or Microsoft Azure.

• Strong understanding of infrastructure-as-code principles and tools.

• Familiarity with scripting and automation using languages like Python, PowerShell, Bash, etc.

• Experience with monitoring and log aggregation tools for proactive issue detection.

• Knowledge of security best practices and experience implementing security controls in cloud environments.

• Excellent problem-solving skills and the ability to troubleshoot complex technical issues.

• Strong communication and collaboration skills to work effectively with diverse teams.

• Certification in AWS Cloud Practitioner, AWS Architect is a plus.

Scripting (good to have)

• Python and associated libraries (pandas, pyspark) • R • Frameworks – React/FLASK

Job Summary:
We are seeking an experienced and dedicated Senior Site Engineer to join our dynamic team in the construction industry. The Senior Site Engineer will be responsible for overseeing construction projects from inception to completion, ensuring they are completed on time, within budget, and to the highest quality standards. This role requires strong leadership skills, technical expertise, and the ability to effectively manage a team of site engineers, supervisors, and construction workers.

Key Responsibilities:

Project Management:

• Plan, schedule, and coordinate construction activities to meet project deadlines.
• Monitor project progress and adjust schedules and targets as required.
• Ensure all work is completed in accordance with specifications, codes, and standards.

Site Supervision:

• Oversee daily site operations, ensuring compliance with safety regulations and quality standards.
• Conduct regular site inspections and resolve any issues or conflicts that arise.
• Liaise with contractors, suppliers, and other stakeholders to ensure smooth project execution.

Technical Guidance:

• Provide technical support and guidance to site engineers and construction teams.
• Review and interpret construction drawings, plans, and specifications.
• Ensure accurate implementation of construction designs and plans.

Quality Control:

• Implemen and monitor quality control procedures to ensure the highest standards of construction.
• Conduct regular inspections and testing of materials and workmanship.
• Address any non-conformance issues promptly and effectively.

Budget and Cost Control:

• Prepare and manage project budgets, ensuring cost-effective utilization of resources.
• Monitor and control project expenses to ensure adherence to budget constraints.
• Report on financial performance and progress to senior management.

Health and Safety:

• Promote and enforce a strong safety culture on site.
• Ensure compliance with all health and safety regulations and standards.
• Conduct regular safety audits and implement corrective actions as needed.

Communication and Coordination:

• Serve as the main point of contact for clients, consultants, and subcontractors.
• Facilitate effective communication between all project stakeholders.
• Prepare and present project reports, progress updates, and documentation.

Qualifications Education:

• Bachelor’s degree in Civil Engineering, Construction Management, or a related field.

Experience:

• Minimum of 7-10 years of experience in the construction industry, with at least 3 years in a senior supervisory role.
• Proven track record of successfully managing large-scale construction projects.

Skills:

• Strong leadership and team management skills.
• Excellent problem-solving and decision-making abilities.
• Proficiency in project management software and tools.
• In-depth knowledge of construction methods, materials, and regulations.
• Strong communication and interpersonal skills.

Certifications:

• Professional Engineer (PE) license or equivalent certification is preferred.
• Safety management certifications (e.g., WSQ) are an advantage.

Working Conditions:

• Full-time position based on-site with occasional office work.
• Willingness to work extended hours and weekends as required to meet project deadlines.
• Ability to work in a fast-paced, high-pressure environment.

As a member of the respondents, you will be part of the team responsible for operational support of Authority's Data Centres (DCs) and expected to work independently. Your primary responsibility is to ensure system functionality, availability, data security, and compliance with industry standard. This includes:

a. Facilitating, monitoring and resolving any IT Infra (Hardware) service request/fault.

b. Conducting regular audit check to ensure vendor/user comply to Authority's DC policies/processes.

c. Ensuring smooth DC operation such as coordinating with Facility Management (FM) for any M&E matters.

You will be working closely with all levels of IT Infra support team and is expected to operate, excel, maintain and monitor operating systems of the Data Centres (DCs) whenever and whatever support service for the enterprise system. This includes being on 24 x 7 standby for response and scheduled maintenance events.

Job Scope:

Data Centre Operation Management

1. Work with user (with/without vendor support) for any escorting/installation/decommission/replacement of IT Infra equipment hosted inside the Data Centre, ensuring compliance to Authority policies/processes and update relevant inventories accordingly.

2. Carry out periodic checks inside Data Centre, looking out for any:

a. Unreported IT Infra hardware fault

b. Environment issue to be addressed (e.g.: Faulty lighting, item obstructing airflow)

c. Abnormality status of facility system (e.g.: Air-con) and report it to Facility Management (FM)

d. Non-compliance

e. Collect power utilization statistic (if required)

3. Manage, procure and support provision of Data Centre equipment/systems, peripherals, spares, user documentations and technical manuals.

4. Utilise alerting and reporting systems/tools to monitor Data Centre operation and relevant M&E related equipment status (If deemed required by the Authority).

5. Work with Asset Management (AM) to perform asset tagging for IT infra equipment.

Requirements:

- Diploma in Electrical Eng., Computer Eng., Information Technology or equivalent with at least 1 year of experience in system administrator role.

- Basic understanding of Network knowledge and components

- Experience in administrating Linux (Redhat) and Windows Server (2016-2025) OS

- Experience in managing virtualization technologies like VMware server/ESXi

- Relevant DC-related professional certifications, such as EPI Certified Data Centre Professional (CDCP) or Data Centre Certified Associate (DCCA) is a plus.

Job Description:

• Responsible for developing system specifications and electrical diagram layouts.
• Assist in setting up, programming, testing, and implementation of computer control systems used for production automation and industrial equipment design.
• Designing and drafting drawings using CAD software.
• Evaluate engineering design to ensure it meets customer specification.
• Prepare design documents based on project specifications.
• Suggest modifications to develop and design to enhance quality.

Job Requirement:

• Good interpersonal and communication skill
• With PLC knowledge and have experience in Electrical wiring & diagram
• Familiar with CAD software
• Able to work well in a team
• Company is located at West Singapore

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Supervision of works at site in accordance with the design

• Preparation and maintenance of daily report / record

• Check and conduct inspections on works performed by subcontractors / gangs

• Check all construction drawings / sketches received on site and to report any discrepancy to the Project Manager

• Handle all problems arising from the project

• Preparation of progress report for the Client / Consultants

• Work in conjunction with the Project Manager and Safety Supervisor to keep the site safe and tidy

• Co-ordinate the handing over of completed works to the Client / Consultants and completion of the necessary rectification works

• Submission of as-built drawings at the end of the project

• Work closely with project team to assist Quality and Validation Manager Asia region to the tasks on schedule and within quality standard compliance.
• Responsible completion of the Quality, Cost, and Time validation functions for customer projects.
• Create and maintain qualification/validation documentation for mechanical, software, and hardware components from the design phase of projects.
• Oversee the qualification and validation processes for projects in conducting risk analysis, protocol drafting, and test implementation during FAT & SAT process internally and partners’ sites.

Requirements:

• Diploma in Mechanical Engineering or equivalent
• At least 2 years of quality and validation of automated systems experience.
• Proficient in MS Office (Excel, Word and PowerPoint).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

Snr. Backend Engineer

About Us:

Vama is an innovative chat and payment platform committed to revolutionizing communication

and transactions. Our team is passionate about creating seamless, secure, and user-friendly

experiences for our customers.

Role Overview:

We are seeking a skilled Backend Engineer to join our talented team. As a backend engineer at

Vama, you will be vital in designing, developing, and maintaining the backend infrastructure that

powers our cutting-edge chat and payment platform. If you are a tech enthusiast with a strong

background in Go, distributed systems, and cloud infrastructure, we want to hear from you.

Key Responsibilities:

● Collaborate with cross-functional teams to design and implement backend services using

Golang and other relevant technologies.

● Work with databases such as Cassandra, ensuring efficient data storage, retrieval, and

maintenance.

● Implement messaging solutions using NATS.io for reliable communication between

microservices.

● Utilize in-memory caching systems like Redis to optimize data access.

● Implement and maintain infrastructure as code using Docker and Terraform.

● Monitor, troubleshoot, and optimize system performance using Grafana, Loki, and

Prometheus.

● Contribute to the development of scalable and robust cloud-based solutions on GCP.

● Write clear and concise API documentation and design APIs that adhere to best

practices.

● Collaborate with front-end developers to integrate user-facing elements using

server-side logic.

● Write unit and end-to-end tests to ensure the reliability and stability of developed

features.

● Demonstrate expertise in Unix systems and a comfort level with Bash scripting.

Required Experience:

● 10+ years of professional experience as a Backend Engineer.

● 5+ years of professional experience in Golang.

● Solid understanding of databases, tables, indices, and distributed systems.

● Knowledge of parallelism, locking, synchronization, and race conditions in software

development.

● Familiarity with caching mechanisms and cache invalidation strategies.

● Experience in cloud infrastructure, preferably GCP or AWS.

● Proficiency in Unix systems and comfort in the terminal.

● Strong commitment to writing comprehensive tests for all developed features.

● Good understanding of API design principles and best practices.

Helpful Experience:

● Previous experience with Cassandra or other distributed databases.

● Familiarity with Docker, Redis, Terraform, and Grafana.

● Knowledge of Kubernetes (experience optional but beneficial).

* Compensation will be commensurate with experience and qualifications *

1. Preparing the project reports and guidelines as per the instructions of higher authorities.
2. Assisting senior engineers in conducting research, designing systems, and analyzing data of specific projects.
3. Identify the problems of execution of project and solve them using engineering principles.
4. Maintaining equipment and inventories of the organization.
5. Collaborating with co-workers to meet the goals of projects.
6. Ensure testing and quality control processes of the products.
7. Stay familiar with the advancement in technologies to develop the highly demandable skills.
8. Following safety guidelines and engineering parameters to executive the project tasks.
9. Participating in learning and development sessions to gain expertise.

Job Description

1) Supervise the work of sub-contractors and work closely with other site operations staff to meet the project schedule.
2) Ensure that works are executed in accordance to specifications.
3) Coordinate with all M&E subcontractors to resolve all technical problems in order to achieve the desired overall project objective.
4) Work together with other project team members to coordinate/resolve technical issues.
5) Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Requirement

1) Minimum 3 years of experience as M&E Engineer in construction related field
2) Diploma/Degree in Mechanical or Electrical Engineering or degree in relevant subject.