Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Responsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTOResponsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

· Degree in Civil/Structural Engineering (recognized by Singapore PE Board)

· Minimum 5 years’ of precast experience in commercial and condo building projects

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Job Description

• Troubleshooting and performance monitoring on network
• Setting up network, switches, routers, firewall
• Implementation and configuration of switches, routers, firewall
• Perform analysis of systems & security logs
• To detect network problems, intrusion and systems failure
• Vulnerability assessment & incident resolution
• Change and Service Request fulfilment
• Perform ticket closure and documentation
• Preventive maintenance tasks fulfilment
• Assist the Team Lead/Operations Manager
• Work independently for L1/L2 Support also as a member in the assigned projects
• Liaise with vendors, distributors & customers to resolve any technical issues
• Review and recommend procedures to manage operations efficiently
• Ensure that service quality standards are met and maintain SLA

Requirement

• Minimum Diploma in Information Technology, Engineering or related field
• Minimum 2 years’ experience in network environment
• Strong knowledge of BGP/OSPF routing protocols
• Familiar with devices like Cisco, Huawei, Fortinet or Palo Alto Cisco ASA
• Experience in various firewalls
• Certification in CCNA would be an advantage
• Strong analytical, good organization skill, and team player
• Possess good communication skill
• Possess a proactive attitude and customers oriented

Please send your detailed resume in MS Word format to : [email protected]

Stating your notice period / earliest available commencement date, Current & expected salaries

Applicants with more relevant years of hands on experience will be considered for senior roles.

Wintel Engineer JD

· Administration and troubleshooting of Windows Servers (Preferably Windows 2008 R2, Windows 2012, Windows server 2003).

· Able to Install of windows servers and has good troubleshooting skills for Wintel systems, knowledge in hardening and securing of Wintel systems.

· Advanced level of Administration of Windows server with active directory, DNS, DHCP and High Availability.

· Understanding of RAID, pros and cons of various RAID levels and decision making on the same in a given situation

· Microsoft cluster configuration, administration and troubleshooting.

· Working experience with various storages, precisely for cluster configurations is good to have.

· Working knowledge in SAN environment and storage space management from systems side is good to have.

· File system and quota management.

· Experience and knowledge on FTP and SFTP Client and Server Model.

· Experience and knowledge with installing and implementing VMware ESX server, VMware virtual Center, setting up V-Motion, HA, DRS, and related VMware products such as VM Workstation, VMware converter VM Backup products and other products for virtualization would be advantages.

· Understanding about the ITIL process

· 3+ Years of System Administration Experience is must.

· Must be a Graduate in Engineering / Science / Diploma in Computers

· Preferably with any two of the given certifications - MCSE / VMWare Certification

· Must have good communication & Interpersonal Skills

· Must be customer-focused

· Good problem-solving skills

Good knowledge and Work Experience in Networking & Security is must.
Managing of Security devices like Checkpoint and Palo Alto Firewalls.
Knowledge on data center network including Cisco Nexus switches.
Knowledge on load balancer like F5 BIG IP (LTM and GTM).
Managing of Servers; AAA, SNMP, Syslog, NTP, DHCP, FTP, DNS, AAA, DNS and DHCP
Managing of Cisco Routers ISR/ASR Series and Switches Catalyst 6500,4500,3750,2960 & 3560 Series
Significant exposure to 802.1x, TACACS+ and Radius.
Experience in managing Wireless Environment with WLAN Controller.
Responsible for day to day Operations and administration on data center network & security infrastructure.
Perform Installation, configuration and maintenance of network equipment and network operating System
Responsible for security, particularly trouble shooting and/or debugging network related problems.
Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities to  first- and second-level teams.
Perform maintenance of the network authorization infrastructure as well as network backup system.
Maintains inventory of equipment and parts as well as documentation of vendor activates.
Develop and documents systems standards for computer and network device.
Recommend and schedule repairs to the LAN/WAN and ensure timely user notification of maintenance requirements and effects on system availability.
Strong networking background and experience, with the ability to do troubleshooting of both access control and network related problems.
Troubleshoot networks, system, and applications to identify and correct malfunction; other operational difficulties and provide telephone and internal users.
Preferably with one of the given Certification - CCNA/CCNP or a Firewall Certifications.
Ready to work in shifts

Job Description

• Responsible for Equipment Uptime, Productivity and CIP.
• Work in a cleanroom environment for long hours.
• In-charge of PM planning, Equipment Maintenance, and Parts Management.
• Co-work with Engineer to resolve equipment/line issues.
• To improve and enhance machine performance and upgrade machine capability.
• Perform any other duties as assigned.

Requirements

• Diploma/Higher Nitec/Nitec in Engineering (Electrical / Electronic / Mechanical), or equivalent.
• Proficiency in Microsoft Office.
• Ability to work independently as well as in a team.
• At least 2 years of relevant working experience in manufacturing environment.
• Fresh graduates are also encouraged to apply.

Responsibilities

• Designing, developing, testing, and debugging sophisticated computer programs such as database management systems, client/server applications, BI Reports.
• Troubleshooting and maintaining existing applications for their continued operation.
• Select and implement appropriate data storage technologies (relational databases, NoSQL databases, data warehouses) based on business needs.
• Ability and eagerness to learn and work in new technologies and Adhering to project timelines.

Requirement

• Relevant study in Computer Science or related field with more than 5 years of experience
• Expertise in SSIS, Power BI, MSBI, SSAS and .Net.
• Strong knowledge of database systems and data modeling techniques
• Basic knowledge in T-SQL and RDMS
• Knowledge in ETL process is added advantage
• Excellent problem-solving skills and attention to detail.

Job Description & Requirements

• Liaise with Clients, Consultants, and Authorities for management of the project
• Must have the experience in Diaphragm wall and pilling
• Perform Civil/Structure engineering design works
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation, and close monitoring of projects
• Determine best materials and methods with Professional Engineers
• Liaise with Architects on design and safety of the structure
• Analysis of structural components with engineering software
• Prepare drawings, specifications, and computer models of the structure
• Ad-hoc duties as assigned by the Senior Engineer

Requirements:

• Candidate must possess at least Degree in Civil/Structural Engineering
• Minimum 10 years of LTA experience required
• Required Skill(s): Good communication and interpersonal skills, ability to liaise with all levels of people
• Relevant experience in the design of Buildings, Civil and Infrastructure works
• Preferably with project site co-ordination experience
• Knowledge of engineering software and MS Office

Job Description & Requirements

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices.

Requirements:

• Possesses at least 7 years of experience in design and construction.
• Minimum Degree in Civil Engineering from accredited Universities.
• Experience in MRT & LTA projects
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.

Well versed in Autocad and BIM software is preferred

Job Description & Requirements

Control and monitor work progress and ensure work quality.

· Responsible for working closely with project team and resolving technical issue

· Responsible for coordination and liaise with contractors, suppliers, and consultants

· Prepare and compile related report

· Attend site meetings

· Any other ad-hoc duties assigned

Requirements:

· Engineering or Civil / Structural Engineering Diploma / Equivalent

· Minimum 5 years’ relevant experience

· Carry out project planning, scheduling, cost control

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

Job Description & Requirements

• Liaise with Clients, Consultants, and Authorities for management of the project
• Must have the experience in Diaphragm wall and pilling
• Perform Civil/Structure engineering design works
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation, and close monitoring of projects
• Determine best materials and methods with Professional Engineers
• Liaise with Architects on design and safety of the structure
• Analysis of structural components with engineering software
• Prepare drawings, specifications, and computer models of the structure
• Ad-hoc duties as assigned by the Senior Engineer

Requirements:

• Candidate must possess at least Degree in Civil/Structural Engineering
• Minimum 10 years of LTA experience required
• Required Skill(s): Good communication and interpersonal skills, ability to liaise with all levels of people
• Relevant experience in the design of Buildings, Civil and Infrastructure works
• Preferably with project site co-ordination experience
• Knowledge of engineering software and MS Office

Job Description:
We are seeking an experienced AI Chip DFT (Design for Test) Engineer to join our team. This role involves the design and implementation of test architectures for AI chip designs, ensuring efficient and reliable testing processes. The ideal candidate will be responsible for integrating DFT circuits, performing simulations, developing test vectors, and supporting yield improvement and fault analysis.

Key Responsibilities:

• DFT Architecture Design: Lead the design of DFT architecture at the chip level, implementing testing circuits such as Scan, Mbit, Memory repair, and Bscan.
• DFT Circuit Design and Insertion: Implement DFT circuits and integrate them into the chip, ensuring proper timing constraints for DFT mode convergence.
• Functional Verification: Perform functional verification, pre-simulation, post-simulation, and power simulation of DFT circuits. Troubleshoot and resolve any issues encountered during testing.
• Test Vector Development: Develop high-coverage, low-cost test vectors and validate them through simulation and timing analysis.
• Yield Improvement and Fault Analysis: Contribute to yield improvement efforts and fault analysis. Assist with testing SDC (Synopsys Design Constraints) constraint files in testing modes and help with timing and power convergence in the backend.

Qualifications:

• Educational Background: Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s or Ph.D.) are a plus.
• Professional Experience: Minimum of 4-5 years of experience in DFT, with expertise in chip-level DFT architecture design, circuit insertion, and testing.
• Technical Skills:
  • Proficiency in DFT methodologies, including Scan, Mbit, Memory repair, and Bscan.
  • Strong experience with functional verification and simulations (pre/post, power simulation).
  • Ability to develop efficient test vectors and perform timing and simulation analysis.
  • Familiarity with yield improvement and fault analysis processes.
• Tools & Scripting: Experience with DFT tools and scripting languages (e.g., TCL, Perl, Python).

Soft Skills: Strong problem-solving skills, attention to detail, and the ability to collaborate effectively with cross-functional teams.

Collaborate with cross-functional teams to develop and support business applications, adhering to company and industry best practices.

Actively participates in analysis, design, coding and testing phase.

Perform maintenance and troubleshooting of issue in existing solutions.

Participates in R&D effort on new and exciting technologies.

Requirements:

Diploma or Degree in Computer Science

Minimum 1 year of hands-on experience in Web Applications development.

Skilled in C#, ASP.Net, .Net Core, MS SQL, Angular, Jquery, Flutter.

Experience in mobile app development (Flutter) is an added advantage.

Attention to details, committed and responsible with strong working ethic, able to work on tight deadlines.

Self-motivated individual with the ability to learn and develop independently in a fast paced environment.

Strong analytical and problem-solving skills and good team player with good communication skills.

The candidate need to work in construction site and need to have construction site work experience. candidate must work shift work and long hours till complete the concrete work task. co -ordination with clients and supervisor and company executives. need to know how to estimate quantity for the concrete volume and steel and form work materials requirements.

Responsibilities

• Assist in project planning and scheduling.
• Review engineering designs, drawings, and specifications to ensure compliance with project requirements and industry standards
• Assist Construction Manager & Quantity Surveyor in Project Progress Claiming Work
• Coordinate with project stakeholders, contractors, and suppliers.
• Track project progress, identify risks, and implement mitigation strategies.
• Provide technical support and resolve engineering issues.

Requirements

• Diploma/Degree Civil Engineering or equivalent
• Minimum 3 years of working experience in LTA Project
• Responsible, mature, hands-on, meticulous and committed team player

Other:

• Working Day: 6 days per week

Skillsets (Must have)

• Experience as a software engineer, with a minimum of 2+ years of proven DevOps and ideally DevSecOps experience.
• Strong knowledge and experience of programming languages such as Java, Python, C# or Javascript/Typescript.
• Good experience in developing software, writing unit/integration test cases and test driven development (TDD).
• Strong knowledge in Linux operating systems and commands.
• Strong knowledge and experience with Git.
• Strong understanding of Docker, Kubernetes (preferably Openshift 4).
• Good communication and written skills.

Skillsets (Good to have)

• Strong understanding of software development best practices including SDLC, Software Configuration and Change Management, Agile, Scrum, Kanban.
• Knowledge and experience with Jenkins, Gitlab, SonarQube, JFrog Artifactory, Cloudbees CD/RO (or equivalent CD tool), and JIRA.
• Knowledge and experience with Helm 3, Terraform and commonly used AWS services as well as AWS automation/IaC stack (e.g. AWS CLI, CloudFormation, Boto3, CDK).

We are seeking a Maintenance Engineer with a focus on security and CCTV systems to ensure the smooth operation and maintenance of our security infrastructure. You will be responsible for installing, troubleshooting, maintaining, and repairing security systems, including CCTV cameras, access control systems, and alarm systems, ensuring they are fully functional and secure.

Responsibilities:

• Install, configure, and maintain CCTV systems, including cameras, recording devices, and related infrastructure.
• Perform regular maintenance checks and troubleshoot any issues related to security systems.
• Conduct system inspections and provide repairs or replacements as needed to ensure system reliability.
• Monitor and maintain access control systems to safeguard restricted areas.
• Ensure that all security systems are compliant with industry standards and best practices.
• Respond to security system alarms, analyze events, and provide recommendations for system improvements.
• Document all maintenance activities, service reports, and system configurations.
• Stay updated with the latest security technologies and trends to ensure systems remain secure and efficient.

Qualifications:

• A graduate in Engineering, Electronics, or a related field (or equivalent experience).
• Knowledge of security systems, including CCTV, access control, and alarm systems.
• Experience with CCTV camera installation, configuration, and troubleshooting.
• Basic understanding of networking and IP-based security systems.
• Ability to work independently and as part of a team.
• Strong problem-solving skills and attention to detail.
• Excellent communication skills and ability to document technical information clearly.
• Must be willing to do OT and standby when necessary.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

• Assist Project Engineers on site
• Monitor site progress and schedule
• Manage to set out, level and survey the site
• Responsible for checking/advise of plans, drawings and qty for accuracy of calculations of area are followed correctly.
• Responsible to ensure all materials used and work performed area are in accordance with the specifications and budget.
• Supervise of project crews and subcontractors
• Coordination work with authorities, clients and QP
• Ensure safety,health & security in charge area

Requirement:-

• Minimum degree holder in Civil Engineering (Recognised by PE Board)
• Minimum 3 years experience in civil engineering
• Able to work under fast environment

BMS Engineer

Responsibilities

• Design and Implement Lighting Control System and Hotel Guestroom System
• Testing and commissioning of Lighting Control System and SCADA
• Project implementation and Project Management
• General server administration and database management

Requirements

• 1 year working experience in the Lighting, AV, CCTV, Building Automation Industry
• Self-motivated and able to work independently
• Diploma/Degree in Electrical/Electronic/Information Technology/ Computer Science or equivalent.
• Working experience with Lutron, KNX Lighting Control advantageous
• CAD Drawings
• Benefits: Excellent Career Advancement, Attractive Salary, AWS, Bonus

Responsibilities

• Responsible for the design, development, maintenance of applications and systems as well as IT production and management of the Bank's technical infrastructures.
• At the forefront of technological innovation, IT teams provide technical and functional support for the development activities and projects of the various Corporate and Investment Banking professions in an international environment.
• Design and development of AI/IA Generative models: Data preparation, feature engineering, training, evaluation, versioning, deployment and monitoring. Select the most appropriate models and techniques based on the available data and the objectives of the projects.
• Establish MLOps / LLMOps infrastructure: Define and implement a robust MLOps architecture to ensure the full life cycle of AI and Generative AI models from design to production. Automate model development, deployment and monitoring processes.Ensure the quality, reliability and scalability of models in production.
• Contribute to realisation of Rest API and development in Python, industrialisation of internal POCs and maintenance of embeddings. Ensure necessary documentation and support handover processes
• Work closely with business teams and other project stakeholders to understand their needs and translate their issues into scientific questions. Communicate the results of the analyses and recommendations in a clear and concise manner.
• Coordinate with Cloud Centre of Excellence and Infrastructure teams to ensure project needs are addressed.

Qualifications and Profile

The successful candidate will definitely have:

• Experience required 2 to 7 years minimum in development of AI/ML technology solutions
• expertise in machine learning, deep learning, generative AI and MLOps.
• Knowledge of data management practices to clean, preprocess and transform data sets for model training
• Mastery of AI algorithms and frameworks (e.g., Tensorflow, PyTorch, Scikit, etc.)
• Knowledge of GEN AI and LLM technologies on the public Cloud using RAG patterns
• Understanding the ethical principles to better generate embeddings for GenAI.
• Expertise in Python, .NET or Java, DevOps / MLOps / LLMOps (GitLab CI/CD, Kubernetes, AWS Cloud, AWS Bedrock, AWS Sagemaker)

Other Professional Skills and Mindset

• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Excellent Aptitude, Curious to learn and inquisitive.
• Autonomous, self motivated and excellent team player.

Next Step

• Prepare your updated resume and expected package.
• Simply click on 'Apply here' or email to [email protected] to drop your resume
• All shortlisted candidates will be contacted.

Tamanna Bilandi

EA Licence No. 91C2918

Personnel Registration No. R2096241

Developer/Senior Developer (Full Stack)

Shaping Singapore’s digital future, we at the Infocomm Media Development Authority (IMDA) often tackle head-on challenges that come with developing and deploying emerging, frontier technologies across various sectors. We Dream, Design and Deliver in the technology and media space, leading Singapore into a limitless digital future.

Join us in playing an exciting role in building Singapore’s digital metropolis.

If you have what it takes to build Singapore’s digital future with us, we are looking for a Full Stack Developer for the role in SGTraDex Technologies Pte Ltd, wholly owned subsidiary of IMDA.

What the role is:

SGTraDex Technologies Pte Ltd is a company incorporated to design, own and operate SGTraDex, a trusted and secured data exchange highway.

You will be part of the Engineering Team and will be working on enterprise level applications to build web applications that facilitates data exchanges across multiple systems.

What you will be working on:

• Drive the development team in building reusable and extensible services

• Advocate and practice agile principles in software development

• Design and build services with a focus on business value and usability

• Design systems with scalability and flexibility in mind

• Embrace and ensure “lean operations” for all system

• Contribute in technical discussion or solutioning session

• Perform code reviews and encourage best practices

• Maintain user guides and technical documentations

What we are looking for

• Experience with Cloud hosting or PaaS such as AWS, Azure, Google Cloud, Heroku, Firebase, etc

• Write high quality and maintainable code on open-source (Linux based) web platforms and frameworks (Example: NodeJS, Angular, ReactJS, Go, etc.)

• Experience with both frontend and backend development from development to operation

• Experience with micro-service architecture

• Experience with at least 1 SQL and NoSQL database

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines

• Excellent written and communication and skills

• Work in a cross-functional service team consisting of software engineers, DevOps, and other specialists

For senior developers:

• Own end-to-end design and implementation for complex systems

• Provide technical leadership within the team

• Mentor junior engineers

• Review and approve code

• Take ownership of the project documentation

• Perform the Scrum master role (scrum master certification is a plus)

This position will commensurate with experience

Only shortlisted applicants will be notified

Job Title: Project Engineer

Occupation: Mechanical Engineer / Fire Protection Engineer

Industry: Industrial Pump Supply

Job Highlights

• 5 Days Work Week
• Attractive Employee Benefits
• Guaranteed 1-Month Bonus + Attractive Sales Incentive
• Work-Life Balance
• Ample Opportunities for Growth

Job Description

We are seeking a dedicated Project Engineer to support our growing team.

As a key player in the company, you will:

• Support the Project Team in pump selection, quotations, technical documentation, and drawings
• Follow up with customers and suppliers on inquiries and orders
• Liaise with customers, suppliers, and internal departments to ensure project deadlines are met
• Initiate and request orders for required project supplies
• Coordinate project timelines and resources

Requirements

To be successful in this role, candidates should have:

• A minimum of a Diploma in Mechanical Engineering or a relevant field
• Project coordination experience
• Strong critical thinking and time management skills
• Ability to work independently in a fast-paced environment
• Analytical, detailed-oriented, flexible, and dynamic mindset
• Strong written and verbal communication skills
• 2D AutoCAD skills are essential (Good AutoCAD skills are an advantage)
• A Class 3 Driving License is preferred but not mandatory

Skills Required

• Project Coordination
• Mechanical Engineering
• AutoCAD (2D)
• Technical Documentation
• Time Management
• Verbal Communication
• Critical Thinking
• Project Management
• Commissioning
• Ability to work independently