Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

As a Cloud DevOps Engineer, you will run and support the company’s software application infrastructure in the cloud, ensuring the optimized use of resources to scale.

What will you do

• Design, develop, and implement cloud infrastructure as code using Terraform.
• Manage and optimize cloud resources for cost-efficiency and performance.
• Secure infrastructure by implementing best practices and adhering to security compliance standards.
• Implement robust monitoring and alerting systems for infrastructure resources.
• Collaborate with developers and operations teams to integrate infrastructure changes seamlessly into the software development lifecycle.
• Champion DevOps best practices for cloud infrastructure management.
• Setup, monitor and support CI/CD pipeline on premise or in the cloud.
• Stay up to date on the latest AWS services and Terraform features.

What do we expect

• Proven experience as a DevOps Engineer with at least 3 years of experience (with a focus on AWS cloud infrastructure).
• Implementation proficiency in service control policy and account governance (Control Tower, OU management, etc.).
• Enable and configure AWS VPC flow logs, load balancer logging, direct connect, AWS VPN, TGX etc.
• Experience managing Unix/Linux environments.
• Extensive experience in scripting in languages such as Python/Ruby/Perl and shell scripting.
• In-depth knowledge and experience with AWS services (EC2, S3, VPC, IAM, etc.).
• Expert-level proficiency in Terraform, including writing reusable modules and leveraging best practices.
• Able to troubleshoot infrastructure issues in cloud, identify root cause and implementation improvement and fixes.
• Good knowledge of microservices architecture, container technologies (Docker, Kubernetes).
• Expertise in Git and GitOps philosophy.
• Good people skills, teamwork, collaboration with cross function and cross-geo teams.
• Self-motivated, willing to learn new technologies continuously.
• Maintain documentation for design, integration, testing, and deployment.

Good to have

• Relevant DevOps certifications (e.g. AWS).
• Some experience with other cloud providers like Azure and GCP.
• Experience with CI/CD pipelines and integrating infrastructure provisioning with development workflows.
• Knowledge on mobile and web applications development.
• Knowledge of big data and data analytics infrastructure in cloud.

Roles and Responsiblities

1. Site project management.

2. Overall project planning, scheduling, monitoring and updating to meet project completion targets.

3. Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

4. Work closely with sub-contractors on project progress and ensure timely work arrangements

5. Liaise with consultant and carry out site inspection.

6. Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

7. Preparation of structural analysis, loading calculation and drawings.

8. Establish good relationship with all relevant parties.

9. Ensure site safety & compliance to authorities’ requirements.

10. To take on PE Assignee supervision role.

Requirement

1. Degree in Civil Engineering or relevant Engineering

2. Min. 3 years’ experiences.

3. RE registration with IES

4. Experience in Infra-structure project more than 200million.

Other informaiton :

Work location at Bugis

To Apply

Please submit updated CV with below details.

• Current & Expected Salary

• List of Projects Handled

• Notice Period

MES Engineer/ IT Engineer/ Manufacturing IT

*Permanent Position

*Working Hrs: Mon- Fri 8.15am - 5.45pm

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• Gather business requirements and evaluate shop floor automation solutions.
• Lead the implementation and optimization of MES systems to enhance production planning and execution.
• Configure and integrate MES with other plant systems, such as ERP and PLCs.
• Collaborate with vendors to develop and implement MES modules for data collection, analysis, and reporting.
• Coordinate with stakeholders and conduct testing (SIT, UAT).
• Provide system monitoring and support, system backup, including troubleshooting, configuration, and issue resolution.
• Perform systems and user administration.
• Provide training to end-users on MES, create and maintain documentation
• Develop and implement digital solutions to improve operational efficiency
• Lead and manage digitalization projects
• Provide technical support for production PCs, workstations, and network devices.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 2- 5 years of practical experience in MES implementation, configuration, and support, preferably in a manufacturing setting.
• In-depth knowledge of MES systems and their functionalities.
• Experience with industrial automation and control systems (PLCs, SCADA).
• Skilled in programming languages (e.g., SQL, Python, C#) and scripting.
• Experience in project and vendor management.

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Joey

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743 | EA Reg No: R1103523

www.rightrecruit.com.sg

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Overview:

Electrical / PLC Engineer to design, implement, and maintain electrical and automation control systems. The ideal candidate will have strong electrical and programming skills and extensive experience with industrial automation systems.

Key Responsibilities:

Design, develop, and implement PLC programs for automated manufacturing systems using platforms such as Allen-Bradley, Siemens, or Beckhoff. Other platforms may also be utilized in the course of your work.

Create and maintain HMI (Human Machine Interface) applications, SCADA systems and MES as required.

Troubleshoot complex control system issues and provide timely solutions to minimize production downtime.

Develop and maintain documentation for PLC programs, including logic flowcharts and technical specifications.

Perform risk assessments and ensure compliance with safety regulations.

Perform calculations, sizing and deployment of LV electrical and control systems.

Inspection, testing and troubleshooting of existing and new systems.

Qualifications:

Bachelor's degree (or Diploma) in Electrical Engineering, Computer Engineering, or related field. Fresh graduates are welcome to apply, experience in Semi-conductor field is an added bonus.

Experience programming PLCs in an industrial environment preferred.

Proficient in ladder logic programming and structured text.

Experience with major PLC platforms. (Allen-Bradley, Siemens, TwinCAT, etc.)

Knowledge of industrial networks and communication protocols.(Ethernet/IP, Profibus, Modbus)

Experience with HMI/SCADA development.

Experience with MES integration and deployment.

Experience with electrical systems and industrial safety standards.

Strong problem-solving and analytical skills.

Strong communication skills.

Working Conditions:

Mix of office and factory floor environment

Will require travel to overseas sites including but not limited to, Singapore, Malaysia, China, India. Existing Visas not required, but is an added bonus.

☑ Basic $ 4500 - $ 5000 Days (Mon – Fri: 08:30am – 5.30pm)

☑ Office Centrally located, Island wide jobsite attended required

☑ Good Benefits + Career Growth

☑ Experience in Fire Protection Project is advantageous!!

Responsibilities:

• Conduct site inspections, gather data, and coordinate with the design team for drawings.
• Verify drawings before construction, addressing customer requirements.
• Coordinate with design team, customers, and subcontractors during construction.
• Inspect and ensure quality work from subcontractors; assist Project Manager in meeting project timelines and safety standards.
• Oversee testing, commissioning, customer training, and final inspections for as-built drawings.

Requirement

• Diploma / Degree in Mechanical Engineering or any related field.
• 1-3years of Project Management experience.
• Knowledge of ISO 9000 standards, problem-solving, and analytical skills.
• Proficient in English, computer skills, and experience with LTA projects preferred.

Interested applicants are welcome to apply online with updated resume to [email protected]

Only shortlisted candidate will be notified

Yvette Kam Soo Leng

Registration: R22107492

Responsibilities:

• Responsible for the design and selection of rotating equipment on EPC projects through the various engineering work phases (i.e. Feasibility / FEED studies and detailed engineering for Offshore, FPSO Projects)
• Plans and directs technical specifications/ standards
• Review all technical requirements incorporated in engineering deliverables.
• Evaluates the technical aspects of bids received from suppliers and concludes technical assessment.
• Assists in placing and executing the orders. Review supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakeholders.
• Oversees the technical and administrative management of the project mechanical team and ensures quality/ schedule of deliverables from the team.
• Provides technical/ engineering support and advice for quality work at site.
• Resolves technical issues using expert knowledge and technical know-how that may arise during the execution of package engineering, fabrication and post delivery.
• Ensures business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behaviour.

Requirements:

• Possess Degree in Mechanical Engineering or equivalent
• At least 15 years of relevant work experience, preferably in the Marine Offshore/ Oil & Gas industries
• Conversant with design standards and International Industry Codes such as ASME, API etc.
• Conversant with specifications and requirements for mechanical rotating equipment such as process gas compressors, screw compressor packages, reciprocating compressors, gas turbines, Sea Water injection pumps and requirements of Industry Codes and Standards, Classification Society rules and all relevant regulatory.

Interested applicants are welcome to submit your resume to [email protected]

EA. R1107675

Agency no. 07C3676

Job Responsibilities:

Gather software requirements and design solutions for modules and small software systems

Develop and support software including applications, database integration, interfaces and new functionality enhancements.

Coordinate cross-functionally to ensure projects meet business objectives and compliance standards.

Write both internal and external technical documentation

Deploy, install, and configure hardware and software systems

Work with team members in customer support, field test and deployment

Perform bug fixing and improvement of current application framework

Requirements:

Bachelor Degree in Computer Science & Engineering, Electrical & Electronics Engineering, Information Technology, or equivalent

2-4 years of in-depth knowledge and experience in front-end and backend development

Ability to solve complex development problems and produce high-quality code while pushing the technical boundaries.

Proficiency in one or more programming languages; we use Python, Javascript and TypeScript.

Knowledge in frontend frameworks such as React, Next.JS, FastAPI, REST API or similar frameworks.

Experience with Docker/Kubernetes, DevOps, CI/CD, Github

Experience with Linux operating system (Ubuntu, RHEL, etc.)

Experience working on Agile projects and Agile methodology in general

Excellent problem solving, communications, and teamwork skills

Summary:

As an OutSystems Senior Software Engineer, you will be responsible for designing, developing, and maintaining applications using the OutSystems low-code platform. You will work closely with business analysts, project managers, and other developers to translate business requirements into robust, scalable, and user-friendly applications. Your role will involve both front-end and back-end development, integration with existing systems, and ensuring the overall quality and performance of the applications.

Key Responsibilities:

· Design, develop, and maintain applications using the OutSystems platform.

· Collaborate with stakeholders to gather and analyze requirements, translating them into technical specifications.

· Develop user-friendly interfaces, ensuring a seamless user experience.

· Integrate applications with existing systems and third-party services.

· Write clean, scalable, and maintainable code.

· Conduct unit testing and participate in code reviews to ensure high-quality deliverables.

· Troubleshoot and resolve issues in existing applications.

· Stay updated with the latest OutSystems features, best practices, and industry trends.

· Document application designs, processes, and changes

We are looking for a skilled and motivated DevOps Engineer (Azure) to join our project on a 12 months extendable contract basis. You will get an oppourtunity to work on exciting AI projects.

The successful candidate will work on the development, deployment, and continuous improvement of our cloud infrastructure, leveraging Azure DevOps practices and tools. This role will focus on building scalable and reliable infrastructure solutions that support our business applications.

Key Responsibilities:

• Azure Cloud Infrastructure Management: Design, deploy, and manage scalable infrastructure solutions using Microsoft Azure.
• DevOps Automation: Implement automation using Azure DevOps pipelines to automate the build, test, and release processes.
• CI/CD Pipelines: Develop, maintain, and improve Continuous Integration/Continuous Deployment (CI/CD) pipelines for seamless application delivery.
• Cloud Resource Management: Work on Azure resources (e.g., virtual machines, databases, storage) and ensure the infrastructure is cost-effective, scalable, and secure.
• Monitoring & Optimization: Monitor system performance and application health to ensure high availability, identify bottlenecks, and implement optimization strategies.
• Collaboration & Support: Collaborate with software development teams, QA teams, and system architects to ensure alignment between development and operational goals.
• Incident Management: Troubleshoot and resolve issues related to the infrastructure and deployments. Perform root cause analysis to ensure issues are resolved efficiently.
• Security & Compliance: Ensure the infrastructure follows best practices for security, disaster recovery, and compliance with industry regulations.
• Documentation: Create and maintain technical documentation on infrastructure architecture, processes, and procedures for knowledge sharing and process improvement.

Key Requirements:

• Education: Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Experience:Proven experience working as a DevOps Engineer or in a similar infrastructure role.
  Hands-on experience with Azure Cloud Services (Azure Compute, Networking, Storage, Azure Resource Manager, etc.).
  Strong expertise in Azure DevOps services, including pipeline creation, release management, and configuration management.
  Experience in building and managing CI/CD pipelines using tools like Jenkins, Azure Pipelines, or GitLab CI.
  Knowledge of containerization technologies such as Docker, Kubernetes, and Azure Kubernetes Service (AKS).
  Familiarity with Infrastructure as Code (IaC) tools like Terraform or Azure ARM Templates.
  
• Skills:Strong scripting skills in languages such as PowerShell, Bash, or Python.
  Experience with version control systems (e.g., Git).
  Familiarity with cloud monitoring tools such as Azure Monitor, Log Analytics, and Application Insights.
  Understanding of networking and security principles within cloud environments.
  Strong problem-solving, troubleshooting, and analytical skills.
  Good communication skills and the ability to collaborate across teams.

Preferred Qualifications:

• Certifications in Microsoft Azure (e.g., Azure DevOps Engineer Expert or Azure Solutions Architect Expert).
• Experience with Agile methodologies and tools such as JIRA.
• Knowledge of microservices architecture and related deployment strategies.

Argyll Scott Consulting Pte Ltd

Position: Senior/ Junior Software Engineer

Campus: DigiPen (Singapore)

Description:

We are hiring a team of software engineers to design and develop software platforms for supporting multi-user AR/VR applications.

Salary Package for 2 years:

• Salary range: $4,000 - $8,000 per month
• 13th-month bonus
• Health and dental insurance

Role:

• Design and develop AR/VR software solutions for online education, team collaboration, and workplace training with a focus on real-time interactive simulation.
• Build infrastructure for real-time interactions, scripting tools, backend web services, and frontend applications.
• Design and implement spatial interactions using 3D game engines, modelling animation tools and shader programming

Educational and Experience Requirements:

• A degree in Computer Science or relevant field
• Strong knowledge in C++
• 3D engine development experience
• Familiarity with core engine technologies such as engine architecture, multi-threading, streaming, computer graphics and advanced real-time rendering techniques
• Experience developing optimized modules in C#/C++ within Unity and/or Unreal Engine
• Experience with database management systems
• Experience with software development life cycle
• At least 5 years of work experience in a similar capacity to qualify for the senior position

Application:

To apply, please submit your updated resume and relevant portfolio with the subject line “Senior/ Junior Software Engineer” sent to:

Dr. Tang Liang

Associate Dean of Academic

Email: singapore-jobs(at)digipen.edu

Responsibilities:

· Develop, test, and deploy Ansible playbooks to automate infrastructure provisioning, configuration management, and application deployment.

· Collaborate with development and operations teams to identify automation opportunities and implement efficient solutions.

· Maintain and improve existing Ansible playbooks and modules.

Qualifications:

· 3-5 years of hands-on experience with Ansible, with knowledge in Openshift and Red Hat Middleware is a plus.

· Strong understanding of containerization, virtualization, and cloud technologies.

· Proficiency in scripting languages (Python, Bash) and configuration management tools.

· Experience with Linux administration and networking.

· Excellent problem-solving and troubleshooting skills.

· Strong communication and interpersonal skills.

· Red Hat certifications (e.g., RHCSA, RHCE) are expected.

About the Company

Our Client is an innovator and leader in the mobility space.

Responsibilities

We’re looking for a Software Engineer (Full-Stack) to provide technical expertise and perform hands-on development and maintenance of the company’s web applications.

• Perform hands-on software development for both frontend and backend;
• Ensure that code and tests are well-designed and of high quality;
• Troubleshoot and find solutions for complex technical issues;
• Work closely with product and engineering teams to ensure strong alignment;
• Identify any risks and suggest mitigations;
• Ensure proper documentation.

Requirements

• Degree in Computer Science or a relevant discipline;
• At least 3 years of experience in full-stack software engineering;
• Technical proficiency and proven experience in React, Angular, and/or Typescript;
• Proven experience in microservices;
• Familiar with in agile methodologies;
• Understanding of software engineering best practices.

Employment Details

• Permanent role;
• Hybrid work arrangement;
• Excellent career progression and advancement opportunities.

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

• Work with users and IT members on a routine basis to troubleshoot reported problems pertaining to application software.
• Identify, log and resolve technical problems of the scope (Incident Management)
• Respond to site to troubleshoot, diagnose and rectify faults.
• Liaise and coordinate the recovery of systems.
• Identify potential changes and system improvements for consideration and implementation
• Create, maintain, and distribute reports of progress to service delivery manager.
• Gather, analyze and assess the client's business requirements and processes evaluate the viability and feasibility of implementing them (including operational and security policies and requirements) and also possible improvements.
• Conduct system functionality testing and work with users user acceptance testing to verify that client requirements are incorporated into the system design
• Support multiple application systems.
• Identify the cause, design, or develop an approach for resolution.
• Communicate and interface with vendors and customers.
• Generate reports and write documentation, e.g. maintenance guide, operation manuals

Requirements

• Degree / Diploma in Information Technology
• Min 3 years of experience with enterprise scale Linux and Windows administration
• Familiar with MySQL, Oracle, and other database servers
• Hands-On experience of .Net framework and Web Services
• Scripting: Windows PowerShell, Unix Scripting will be added advantage
• Able to work well within team and willing to learn
• Good grasp of emerging technology trends
• Start-up focused with an upbeat and enthusiastic attitude

Please send your detailed resume in MS Word format to [email protected] with:

• Education Level
• Working experiences
• Each employment background
• Reason for leaving each employment
• Last drawn salary
• Expected salary
• Date of availability

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Key Responsibilities:

1. Design & Implementation:

• Integrate Azure Sentinel with on-premises and cloud-based resources for comprehensive threat visibility.

• Develop and manage Log Analytics Workspaces and data connectors.

2. Security Monitoring & Threat Detection:

• Create and maintain custom rules, alerts, and automation playbooks.

• Analyze security events, identify threats, and provide actionable recommendations.

• Monitor and manage SIEM dashboards for real-time threat intelligence.

3. Incident Response & Management:

• Respond to security incidents and conduct root cause analysis.

• Coordinate with stakeholders to mitigate risks and resolve vulnerabilities.

4. Optimization & Automation:

• Enhance Sentinel performance by optimizing data ingestion and query performance.

5. Documentation & Reporting:

• Develop and maintain documentation for configurations, processes, and incident responses.

• Generate detailed reports on security incidents, trends, and recommendations.

Qualifications & Skills:

• Bachelor’s degree in Computer Science, Information Technology, Cybersecurity, or related field.

• Proven experience with Azure Sentinel, Microsoft Defender, and Azure Security tools.

• Strong understanding of SIEM platforms and security operations.

• Knowledge of KQL (Kusto Query Language) for writing log queries and analytics rules.

• Familiarity with threat detection frameworks like MITRE ATT&CK.

• Experience with incident response, threat hunting, and SOC operations.

Being client representative for all Process-related activities and installations

Supporting the E.O in getting the necessary information at the battery limits of the package

Ensuring alignment between equipment suppliers and client Specification and Guidance

Reviewing design and technical documentation

Following-up construction & all testing activities falling under the package' scope

Ensure systems start-up and punch list solving

Provide projects support in terms of technical expertise, contractors' management and troubleshooting capabilities.

Facilitating handover process towards the end user

Review documents for ITT process & contractors' selection

Detailed design studies review with contractors, including follow up of yellow reviews, functional specifications, piping and vessel design, 3D-model

Works supervision, Walkdowns performed, FAT, SAT, IQ, OQ + punch list follow-up

Provisional and final acceptances

Final handover for process packages and systems.

Experience in the Bio-Pharmaceutical industry

Perform his/her work in an EHS and cGMP high-demanding environment.

Chemical or Process engineering degree is required.

10 years of experience in the field of Bio or Vaccine Process engineering is required, ranging from early design to facility start-up.

Deep knowledge of commissioning and qualification of similar production trains is a must.

Experience with Centrifugation and Ultrafiltration systems is a must.

• Good degree in Civil / Structural Engineering from a recognized University
• Minimum 5 years working experience in Civil & Structural Consultancy Firm
• Experience in Underground & Bridge structures would be advantages
• Ability to work independently
• Candidates without the relevant working experience but with good academic results may be considered

Job Description

This is a client facing / delivery role, working on cloud operations in the delivery team. You will execute daily cloud operations as well as cloud implementations in technical customer engagements including basic operations and administration, specific implementation projects and/or pilots in Cloud.

The ideal candidate will have experience in delivery roles and success in implementation discussions, hands-on experience with good client handling skills and good team player within the team. The candidate should also be able to provide solutions and technical expertise to fellow team members and in client accounts.

Responsibilities

• Apply technical knowledge, hands-on and customer insights to operate and administrate a cloud infrastructure
• Ensure all configuration conforms to high levels of performance, security, scalability, maintainability, and appropriate reusability and reliability upon deployment, aligning to design documentation specifications
• Ability to codify or implement/deploy configurations with the principles of automation by default in new projects with proper documentations will be advantageous
• Ability to codify or maintain cloud systems in an automated fashion using tools like Ansible, CloudFormation, Terraform etc with proper documentation will be advantageous
• Participate in Cloud Migrations for VMs using tools like CloudEndure, Azure Migrate with more than 20 VMs migration or Databases would be preferred
• Collaborate with team members to engage clients in operational meetings, discussions, process betterment and contribute to optimisations for the client’s environment
• Maintain technical skills, certifications and knowledge of market trends and competitive insights; collaborate and share with the technical community specifically in the cloud space
• Ability to resolve issues with proper resolution/documentation technically and SLAs is required for this role

Qualifications

• Professional Experience - 3+ years of success in operational/administration and deployment/migration projects in Cloud Environment
• Problem Solving. Ability to solve customer problems through cloud technologies
• Collaboration and Communication. Acknowledged helping to provide solutions to issues collaboratively, resolving conflicts and ensuring follow through with proper follow up and closure.
• Technical
  Strong technical experience with cloud infrastructures, migrations, and technology management preferred
  AWS Solution Architect Associate Certification will be advantageous.
• AWS Cloud Practitioner Certification or Azure Certified Administrator or Fundamentals is required
• Subject matter expertise in one or more of the following:
• Competitive Landscape. Knowledge of Containerisation technologies eg EKS/AKS/GKE/K8s/Openshift/Tanzu would be advantageous

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

General information

As a Service Engineer, you will be responsible for executing Service work with low to medium complexity according to work instructions and in accordance with ABB standard processes, quality standards and safety guidelines.

Reporting to Service Manager, you will be delivering quality customer service to satisfy customers. In close co-operation with customer and other ABB teams, take actions to identify new Service business opportunities for ABB.

Health and Safety

• Apply safety rules and safe practices as well as environmental responsibilities
• Report unsafe practices and incidents

Service Delivery

• Execute after sales business activity preventive & condition based maintenance, trouble-shooting, repairs and commissioning.
• Actively coordinate with operation supervisors for optimal service potentials from regular customer interactions.
• Proactively involve in self learning and practical exposure for continuous competence and productivity improvement.
• Maintain high level of personal leadership on safety and quality on work performed as well as documentations.
• Reports early any technical/contract/quality/program/cost issues to management, along with recommendations for resolution.

Additional Requirement

• Understand customer needs & manage customer relationships
• Co-operate actively with other ABB units to achieve common targets
• Support sales team

Leadership

• Provide leadership and coordination for the service team
• Create and develop good team spirit

Continuous improvement

• Proactively identify area of improvement eg. Self-technical knowledge, job safety and etc
• Participate in discussion, meeting, training and e-learning

Your background

• Diploma, ITC or equivalent in Electrical/Electronics engineering with at least 3 years hands on repair and service experience on electrical equipment.
• Experience on LV & MV VFD will be an advantage
• Strong electrical or electronics engineering fundamental knowledge. Knowledge on theory, structure, application, testing methodology and component fault diagnosis/analysis will be added advantage.
• Strong self-discipline with initiative and learning spirit with positive attitude, team work and responsibility.