BMS, Building Management System Engineer x 1

5 day week. Attend site rectification, able to work from home if site does not require.

Job Description

• Programme DDC panel
• Well verse in digital and analogue systems.
• High level interfacing with various communications. Modbus, IP, etc.
• Control, monitoring, systems.
• Hvac control, Electrical control, Power usuage
• Attend to fault call.
• Good troubleshooting skill and experience

Dip/ Degree in Engineering

Good understanding and hands on experience in programming of BMS systems is a MUST.

CHANG MIN ENGINEERING LOOKING FOR AN ENTHUSIASTIC CIVIL ENGINEER FOR THE UPCOMING PROJECTS.

• Perform preparation of design specifications
• Incorporate special features which relate to the project at hand into specifications. These include order of work, physical conditions at the site, construction work schedules, method of payment and measurement, construction procedures and special methods, and coordination with contractors and other stakeholders
• Perform technical review on specifications to ensure clarity, completeness, and exactness, and to remove restrictive descriptions so as to ensure competitive bidding
• Prepare project for advertisement by compiling contract specification into Electronic Bid Set (EBS)
• Visit proposed project site to obtain necessary information for use in creating project specification. This include condition and location of project site, location of storage and staging areas, and character and scope of work
• Provide guidance and technical advice to various persons and departments, including engineering personnel, Branch Chief, Section Chief, Engineering and Construction Department, and Architect-Engineer firms where necessary to develop basic specification procedure and policies to cover new types of projects and structures, and to make clearer various phases of the construction work
• Communicate with higher authorities on issues concerning specifications, engineering interpretations and explanations, supply of items, and items of work, and offer recommendations on reviewing specifications.

Requirements – Knowledge, Skills, and Abilities – for Civil Engineer Role

We are expecting the major requirements and qualifications the candidate should possess to be considered for the position:

• Minimum 4-year Bachelor’s degree in civil/construction engineering
• Strong skills in analysis and problem solving
• Solid understanding and ability to adhere to local, state, and federal guidelines and regulations
• Ability and willingness to travel frequently – for at least 40% of the time
• Strong ability to supervise tendering procedures and compile job specifications
• Ability to carry out effective technical and feasibility studies, as well as site investigations
• Ability to effectively monitor and drive project activities
• Ability to prepare safety and function analyses
• Possess strong organizational and site management skills to effectively coordinate site activities
• Ability to perform calculation, dimensioning, and control of concrete and metallic construction
• Profound ability to carry out safety analyses and stability and quality control
• Ability to effectively work with professionals from other fields, including subcontractors and architects
• Strong ability to plan and manage project resources and budgets
• Excellent in the use of relevant civil engineering software programs, including AutoCAD and Civil 3D
• Strong communication skills, including verbal and written

Conduct primary technical reviews of the contractors work and ensure approvals are obtained where relevant

Evaluate and advise on electrical related design changes and non-conformances to ensure fulfilment of the requirements

Identify new business opportunities and have involvement in bids/tenders etc

Provides guidance and direction on department design guides, standards, systems, applicable engineering codes and policies

Independently applies knowledge and complies with quality program relative to assigned tasks

Oversees collection, assimilation, and management of data for engineering work

May offer other services to the clients

Provide electrical engineering and technical expertise to ensure the safe and reliable operation of electric power systems in processing facilities worldwide

Originate plans and develop strategies for power systems worldwide to ensure electrical reliability and safety in the most cost effective manner

Participate in engineering design through all phases of the process

Preparation or supervision of drawings for plant general arrangements, power single line diagrams, cable block diagrams, instrumentation loop diagrams, P&IDs, control system architecture drawings, and cable, instrument and I/O schedules at detailed design level.

Some electrical design will also be required for integration and system development of electro-mechanical systems

Assist in design and documentation of vehicle electrical architecture

Develop Project Timelines in support of Program milestones

Development and Release of Engineering Component and Assembly Drawings

Resolve Test Issues and Document Through the use of the PDCA Process

Test and certification report generation

Provides electrical engineering and project management expertise in support of projects, to ensure stated quality, operational, safety, schedule and budget objectives are met

Provide training to electricians on safety

Ensure complete and current electrical prints for all machines

Maintain documentation for all electrical components used

Organize documentation and electrical prints

Design Circuit Card Assemblies (CCA) using Altium Designer for Schematic, and layout

A working knowledge of cost estimating, code review, field investigation, report and memo writing and other similar electrical engineering related tasks

Power distribution, essential power systems including generators and UPS, Substations, transformers, metering, primary and secondary switchgear, motor control and motor control centers Life Safety including Fire Alarm system design

Prepare reports, proposals, and tender/bid submissions, budgets, project plans and other supporting documentation as required

Develop standards related to our electrical engineering practice, ensuring best practices for project delivery, and when applicable sustainable building constructions

Lighting, Lighting Control systems.

Manage internal and external stakeholders - Support and run the commercial and contractual side of projects

Evaluates and test components

Ensures design, fabrication, maintenance and repair methods/processes are developed executed in a manner, which supports all quality standards

Develops, designs low voltage (600V) and medium voltage (15kV) and high voltage (115kV) electrical distribution systems for building, industrial and utility facilities

Performs electrical system design for switchgear, switchboards, motor control centers, variable frequency drives, generators, transformers, distribution panels and various raceway systems

Designs underground medium voltage distribution systems and sizes electrical low voltage (600V) and medium voltage (15kV) and high voltage (115kV) equipment

Serves as the Engineer of Record for drawings, specifications and reports prepared under their direction

Performs field investigations, field inspections and witnesses start-up/acceptance testing activities

Works effectively in a collaborative environment with Architects, Mechanical Engineers, Civil Engineers and Structural Engineers on large multi-discipline projects

Coordinates with Mechanical, Fire, Architecture, Structural and Civil disciplines for comprehensive building design or modification.

Provide instruction on electrical drawing and using AutoCAD electrical

Work with PCB Fabrications houses to develop the stack-ups, dieletric materials, routing guidelines, and any Design For Manufacturing (DFM) suggestions

Write AFCEs

Determine project specifications

Compare equipment and select manufacturer

Work with on-shift maintenance personnel to find and fix problems on down equipment

Engineer solution to fix root cause and prevent recurring failures

Create and conduct training, if required, to prevent future downtime

Design equipment upgrades to optimize machine performance

Estimate total project costs and estimate project payback

Responsible for designing, testing, supporting, and troubleshooting components of low-voltage and medium-voltage electrical systems operating up to several megawatts

Develop system-level and/or physics-based models of components and devices in support of new technology development, project engineering, and test & evaluation

Develop and/or improve the test methods and procedures

Write test procedures and technical papers

Responsible for the design, analysis, and testing of advanced power electronic systems for both military and commercial applications

Will lead and direct small technical teams (engineers, designers and technicians) in solving complex problems

Responsible for writing requirements, specifications, and design reports

Act as an expert and advisor in power electronics engineering and electrical engineering area

Advises and directs the activities of assigned programs and/or projects to achieve technical objectives

Responsible for digital and analog design with power electronics emphasis and must be able to do system level design and analysis

Requirement:

Degree in Electrical and Electronics Engineering.

Knowledge of international codes & standards IEC, ANSI / IEEE

Significant experience in the power generation industry strongly desired

Prepare Electrical Engineering deliverables such as calculations, equipment specifications, datasheet

Working knowledge of “AutoCAD” or equivalent CAD system, MS Project, and MS Office

Track record of launching high volume electronics products, especially low power platforms

Knowledge of the PCB design process and tools experience with Cadence or Altium products

Proficiency with EE lab instruments and their use in verification and troubleshooting

Experience with ODM, JDM, or CM models of product development

Self-starter and creative problem-solver

• Supply Chain Management / Procurement Exp
• Maintenance Industry / Electrical Spare Parts Exp
• Degree in Supply Chain / Business

Job Scope:

• Responsible for sourcing for direct / indirect materials, dealing with vendors and negotiating for the best price and payment term from local / overseas vendor
• Collaborate and maintain good working relationship with stakeholders and vendors, for planning and initiation of necessary procurement
• Liaison with vendors for timely delivery and monitor all purchases to avoid any shortages, overcharges and defects of materials
• Resolve supply, quality, service and invoicing issues with stakeholders, vendors and identify process bottleneck, propose and implement solutions to resolve issues in a timely manner
• Assist to implement internal procurement strategies
• Prepare, develop and review department contracts for new and existing supplier, and constantly monitoring the validity and expiry of each contract
• Prepare and develop various documentations (e.g. Tender, SOPs, Work Instruction, Reports, etc.) and monitor the validity & expiry of each documentation
• Assist as the System Administrator for section’s Maintenance Management System (MMS)
• Monitor and track Asset Life Cycle for planning of asset renewal and/or disposal
• Support Budgetary Planning and Costing
• Any other duties as assigned

Requirements:

• Possess a Degree in Business Admin / Supply Chain is preferred
• Possess 1 – 3 years of relevant working experience in Asset Management / Supply Chain Management / Procurement
• No experience are welcome and training will be provided
• Prior experience from equipment maintenance industry or with experience in electrical spare parts is advantageous
• Hands-on experience on Enterprise Resource Planning (ERP) Systems (e.g. ServiceNow, SAP, Maximo, Oracle) is advantageous
• Able to work well independently and in a team under a challenging and fast-paced environment

To apply please click on the APPLY NOW button or email your resume with the following details inside your resume for faster processing:

• Reason for leaving each past & current employment

• Salary drawn for each past & current employment

• Expected Salary

• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Yoong Poh Feng

EA License | 14C7092

EA Registration Number | R1105076

• Strong understanding of DevOps principles and experience with CI/CD pipelines.
• Knowledge in source code management tools such as Git and GitHub, and experience with branching and merging strategies.
• Familiarity with containerization technologies such as Docker and Kubernetes.
• Experience in Cloud computing platforms such as AWS, including EC2, S3, Lambda, Glue and RDS.
• Good understanding of infrastructure as code principles and experience with tools such as Terraform or Cloud Formation.
• Experience in Level 2 issue troubleshooting.
• Knowledge in test environment setup and experience with tools such as Selenium or Postman.
• Knowledge in databases and SQL.
• Knowledge in networking protocols and services, such as DHCP, DNS, Firewalls etc.
• Experience in JVM development environment.
• Support RPMD applications.

Responsibilities:

• Purchase administration and order processing
• Negotiate with suppliers for the most cost-effective deal
• Negotiation of pricing, credit terms and supplier contracts, delivery schedule
• Monitor cost and project budget and develop cost forecasts
• Vendor development-evaluate vendors based on quality, on-time delivery, and cost
• competitiveness
• Source of quotation and liaise with suppliers, manufacturers, and relevant internal
• departments
• To perform any other duties as assigned by management

Requirements:

• Preferably having experience in relevant fields
• Team players and committed to work
• Good communication and negotiation skills
• Proactive in solving problems
• Good in planning, organizing, and prioritizing assignments
• Able to implement improvement processes
• Independent, able to work under pressure, as well as multi-tasking

Our client is a Water Treatment Industry. Due to their current expansion plan, they are looking for a Purchasing Assistant to join their team, in hopes of developing the current high performing team. They are located in the West.

Key Responsibilities:

• Manage data input, analytics, and maintenance of the Procurement Department’s electronic folders.
• Conduct clerical and administrative tasks within the Procurement Department.
• Assist and support the team with quotation and tender activities.
• Utilize internal Purchase Requisitions to identify and process purchase requirements, ensuring accurate information for the Purchase Order process.
• Monitor and expedite Purchase Orders with vendors.
• Communicate order status updates to internal stakeholders.
• Ensure proper filing and archiving of Vendor Registration documentation.
• Confirm goods receipt for Purchase Orders upon delivery.
• Perform additional duties as required, aligned with the role.

Requirements:

• Possess at least “O" Level or Diploma/ITE certification in Office Skills or equivalent.
• Knowledge of Microsoft Office applications (Word, Excel)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

R24122162 | LAI CHAI LI

Technical Sales Engineer
5 days
9am-6pm
Kallang
$4000-$6000

The Technical Sales Engineer is responsible for supporting the sales staff in presenting technical presentations of our products as well as assisting on installations of our products in both a pre and post-sales support role

Responsibilities:

• Provide pre- and post-sales technical support to customers
• Technical support of field service engineers and customers when required
• Evaluating and establishing vision system performance specifications
• Manage customer specific projects & documents

Requirements:

• Degree / Diploma in engineering discipline with minimum 1 year experience
• Knowledge in field servicing and semiconductor industry
• Knowledge in Die Sorter or Wafer Sorter will be preferred.
• Ability to troubleshoot electronics hardware system is an added advantage.
• Good Knowledge of PC hardware, OS and networking.
• Proficient in Microsoft application
• Min 1 year related experience. Technical and support to field service engineer and customer

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

Responsibilities:

• Purchase administration and order processing
• Negotiate with suppliers for the most cost-effective deal
• Negotiation of pricing, credit terms and supplier contracts, delivery schedule
• Monitor cost and project budget and develop cost forecasts
• Vendor development-evaluate vendors based on quality, on-time delivery, and cost
• Competitiveness
• Source of quotation and liaise with suppliers, manufacturers, and relevant internal
• Departments
• To perform any other duties as assigned by management

Requirements:

• Preferably having experience in relevant fields
• Team players and committed to work
• Good communication and negotiation skills
• Proactive in solving problems
• Good in planning, organizing, and prioritizing assignments
• Able to implement improvement processes
• Independent, able to work under pressure, as well as multi-tasking

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Job Responsibilities:
- Maintains the Company Integrated Management System, ensuring all business processes are documented, have a designated owner and a plan for their maintenance, aligned to Survitec strategy and associated accreditation and/or regulatory frameworks.

- Perform internal audit procedure and schedule as per Department audit plans, to include the audit Scope, Objective and Criteria. Deliver the audit report including findings; agree on corrective actions with auditees and refer findings to the Manager.

- Investigate non-conformances using current and appropriate methods, systems, and procedures, taking action to solve immediate compliance issues.

- Identifies shortcomings in quality processes or outputs, identifies root cause and works with internal stakeholder to adjust processes or working practices to remove or mitigate any production quality issues; uses established change management programs to address issues and deliver sustained improvements.

- Attend aviation related training and create/refresh and update on internal company aviation training notes.
Conduct internal company training as per aviation requirements.

- Implements systems to ensure compliance with QHSE policies, group and Customer requirements; ensures audit, inspection and risk management are adhered to and embedded throughout the system.

- Document control system management, revision and updating.

- Defines and communicates the processes and schedule for audit, working with colleagues from the Quality function to ensure all supplier, operational, technical, health, safety and environmental audit activity is carried out as planned.

- Leads and participates in quality, non-conformance and customer complaint investigations.

- Provides written reports on audit and investigation findings, implements and monitors CAPA and improvement actions. Ensures findings are reported and escalated appropriately.

- Works with Survitec QHSE colleagues to develop tools and dashboards for the statistical analyses on which recommendations for improvement are based. Ensures outputs from QHSE reporting tools and dashboards are communicated to and understood by the business.

- Inform manager of audit findings and compliance issues, including capability gaps, workflow issues or matters requiring quality development or improvement.

- Any others tasks/projects as assigned by line manager from time to time.


Job Requirements:
- Degree/Diploma in Engineering (preferably Quality Engineering).

- At least 2 years of Quality Assurance experience in Aviation industry.

- Knowledge of ISO 9001, ISO 14001, and TS 16949.

- Proficiency in statistical tools and Microsoft Office.

- Strong analytical, problem-solving, and communication skills
Certified Internal/Lead Auditor (preferred).

- Train the trainer qualification will have added advantage.

The Job:

Act as key person of the project as designated by Piping Department Manager and performs the function inherent to this position.

Preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection.

Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information.

Review piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, providing technical guidance, and organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

The Role:

• Study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.

• Assist in planning and organizing piping engineering activities and manpower requirement for the project.

• Assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.

• Coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project.

• Prepare piping information list and layout and document list following standard procedure created for the project.

• Prepare piping general specification inclusive of specification for piping arrangement, piping support standards.

• Interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.

• Develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, air fin coolers, heaters, compressors and reactors, preferably in 3D CAD format.

• Check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.

• Check and review piping material specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.

• Provide field engineering support/advice towards piping installation and testing at construction site.

• Perform the function inherent to Piping Key Person as designated by Piping Department Manager.

• Evaluate the performance of and provide counseling and guidance to members of the project.

• Identify and recommend training programs including cross training of piping staff within the team in collaboration with the Department Manager.

• Prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.

• Perform other tasks that may be assigned by the Department Manager.

• Carry out engineering support work during the construction phase of the project.

The Requirements:

• Degree of any four years BS Engineering course, preferably Mechanical Engineering or least 15 years related experience and/or training; or equivalent combination of education and experience.

• At least 12 years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, and 5 years of which in a supervisory capacity.

• Good knowledge of AutoCAD.

• Basic knowledge of 3D Model review through Navisworks or SPR Software.

• Interpretation of stress/vibration analysis report.

• Able to read, analyze, and interpret common technical information, contracts reports and instructions.

• Able to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.

• Strong leadership qualities and analytical and reasoning abilities.

• Good interpersonal and communication.

To Apply:

Please send your latest CV in word file to [email protected]
Kindly indicate your availability, current and expected remuneration package.
We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)
Registered EA Personnel (Reg. No.:R1551322)

PURPOSE OF THE JOB

The Mechanical/Thermal/Process Engineer will support diverse power and energy consulting projects throughout the Asia region. Further responsibilities would also include assisting in business development and proposal preparation, collaborating with WSP's regional and international experts as needed.

MAIN RESPONSIBILITIES

As a Mechanical Engineer within the Power and Energy Team, your responsibilities will include:

• Supporting Clients during project feasibility studies, appraisals, procurement evaluations, contractor/vendor design reviews, engineering processes, construction, commissioning, and performance testing, and when required, presenting to clients.
• Contributing to preparing design specifications and provide technical advice to clients on various aspects of power plant development, including configuration options, performance evaluation, prime equipment selection, Balance of Plant (BoP) systems and components, reliability and availability analysis, enabling infrastructure, and considerations for project implementation.
• Assisting managing the technical delivery requirements of projects and project execution to ensure they meet established standards and client expectations.
• Assisting in Business Development and Proposal Preparation, collaborating when required with WSP's regional and international experts as required.
• Conducting market analysis, identifying opportunities, and helping to building business cases for new projects and services.

QUALIFICATIONS

• Master/Bachelor of Engineering degree in Mechanical/Chemical engineering.
• 3 to 10 years of experience as a mechanical/process engineer in the power and energy sector, ideally developed within a plant/system design role or professional services/consulting environment.
• Familiar with gas turbines, CC & CHP power plants, or waste-to-energy plants, including key technologies & components and project lifecycle considerations.
• Experience of working with public and private sector clients in the Asia region.
• Experience in managing and developing client relationships, driving sales, and achieving business growth in engineering consulting or a similar technical industry.
• The following are desired:

1. An additional business qualification (e.g., MBA) would be advantageous.
2. Knowledge of, or the ambition to learn and develop, expertise in process systems for generation of biofuels and power plant waste cleaning systems such as flue gas and wastewater treatment.
3. Familiarity with any design software such as Thermoflow’ GTPro, Steam Pro, CFD, PVsys, WAsP, etc., would be advantageous.
4. Proficiency in MS Office.
5. Experience with project management methodologies and project planning software tools such as, Primavera and MS Project.
6. Ability to collaborate and work effectively with cross-functional teams.

Responsibilities:

• Define Product Architecture, Conceptualize and Prototype new designs based on specifications
• Participate in Design and Development of baseband analog/logic/digital circuit for wireless audio products.
• Perform circuit integration, schematic generation and circuit/system levels testing and optimization.
• Ensure design processes and documentation meets company requirements
• Work with a team of engineers and/or designers through different phases of the product development.
• Willing to travel overseas to support prototype builds and customers reviews

Requirement:

• Degree in Electrical/Electronics/Communication Engineering.
• Min 3 years experience in baseband design and Development
• Hands-on experience in design and test of Baseband/Audio/Power management is required.
• Knowledge of baseband system integration for audio, power, battery, memory and processor components are desired.
• Experience in audio/wireless hardware system design is an advantage.
• Analytical, independent, highly energized, good interpersonal skills, excellent communication skills and good leadership qualities.
• Excellent teamwork skills, flexibility, and ability to handle multiple tasks.

The above information on this description has been designed to indicate the general nature, and level, of the work performed by this position. It is not designed to contain, or be interpreted, as a comprehensive inventory of all duties, responsibilities and qualifications required.

Interested candidates may also apply or write in to CS Chua, EA 12C6130/ R1548619 [email protected]. Shortlisted candidates will be contacted for a discussion.

Job Description

• Industry/ Organization Type: Manufacturing (O&G)
• Position Title: Mechanical Engineer
• Working Location: Jurong East
• Working Hours: 5 days (Monday to Friday (9 AM - 6 PM)
• Salary Package: Basic Salary up to $7,500 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Focus on equipment design, hands-on assembly, testing, troubleshooting, and supporting projects related to jacket flooding systems and valves
• Assess the client's needs to understand design requirements.
• Use CAD software to create design drafts (such as P&ID and GA drawings).
• List necessary materials, compare with current stock, and manage inventory reports for project implementation.
• Keep track of the project's progress to ensure it aligns with the planned timeline.
• Test, diagnose issues with, and fix equipment or products manually.
• Manage the submission of documents to clients.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or a relevant advanced qualification.
• Minimum 1-2 years of mechanical engineering experience in the O&G industry.
• Skilled in using AutoCAD for drafting and competent with Microsoft Office.
• Hands-on technical skills are an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66240 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Civil Engineering Firm
• Position Title: C&S Engineer
• Working Location: Lavender (near MRT)
• Working Hours: 5 Days, Mon – Fri (8.30am – 6pm)
• Salary Package: Basic Salary + Annual Bonus
• Duration: Permanent

Key Responsibilities

• Perform civil and structural analysis, design development, and impact assessments.
• Oversee the planning, design, and coordination of civil engineering and infrastructure-related designs, as well as site works.
• Ensure that all engineering activities adhere to the relevant statutory requirements, regulations, and industry standards.
• Act as the main point of contact, maintaining communication between project stakeholders, clients, consultants, contractors, and relevant authorities.
• Support the Team Leader in ensuring that design and supervisory work meet high-quality standards.
• Other tasks as assigned.

APPLY NOW!!!

• Bachelor’s Degree in Civil Engineering or equivalent. (Preferably recognized by PEB)
• At least 1 year of design experience in civil engineering projects in consulting firm.
• Good knowledge of authorities’ submission requirements for civil and infrastructure projects is required.
• Familiarity with ground improvement works, civil and structural design, and BIM is a plus.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70252 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Application Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $3200
• Duration: Permanent

Key Responsibilities

• Assist with vision software, GUI, and SDK integration.
• Develop and implement robotic applications and AI functionalities.
• Conduct evaluations and proof of concept, and create proposals for project initiatives.
• Install and provide on-site system support.
• Contribute to R&D efforts for emerging technologies.

APPLY NOW!!!

• Must Diploma/bachelor’s degree in an Engineering or Physics related discipline.
• Candidates with relevant experience but without the education will still be considered.
• Minimum of one (1) year of relevant work experience.
• Able to travel overseas for work
• Training will be provided for candidates without relevant experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70610 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: IT/Telecommunications
• Position Title: Project Engineer
• Working Location: Macpherson
• Working Hours: 5 working days (Mon to Fri 8.30AM – 5.30PM)
• Salary Package: Basic Salary up to $3,500 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for managing the overall direction, coordination, implementation, execution, control and completion of structured cabling projects
• Monitor the day-to-day activities in the field, managing the flow of information, and reporting and tracking issues arising from progress, quality and safety
• Assist in completing the handover plan, ensuring documentation is completed and expectations are met on time and with quality
• Identify issues proactively and work with the team to resolve effectively
• Maintain and develop strong relationship with customers with direct interaction with focus on improving customers’ perception of service, quality, on time delivery, responsiveness, and problem solving.
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Diploma/Degree in Engineering or any relevant discipline
• Has 1 year of experience with fiber optics or relevant products in the industry
• Prior experience with Structured Cabling/ELV is an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71056 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities:

• Design, develop, and deploy data tables, views, and marts in data warehouses, operational data stores, data lakes, and data virtualization platforms.
• Perform data extraction, cleaning, transformation, and flow, including web scraping as required.
• Build, launch, and maintain efficient, reliable large-scale batch and real-time data pipelines using data processing frameworks.
• Collaborate with cross-functional teams, including Project Managers, Data Architects, Business Analysts, and others, to develop scalable data-driven products.
• Develop backend APIs and manage databases to support applications.
• Work in an Agile environment, practicing Continuous Integration and Delivery (CI/CD).

Experience and Skills Required:

• Proficiency in data cleaning and transformation tools (e.g., SQL, pandas, R).
• Expertise in building ETL pipelines using tools such as SQL Server Integration Services (SSIS), AWS Database Migration Services (DMS), Python, and AWS Lambda.
• Strong database design skills and experience with various databases (e.g., SQL, PostgreSQL, MongoDB, MySQL).
• Familiarity with cloud technologies (AWS, Azure, Google Cloud).
• Knowledge of system design, data structures, and algorithms.
• Proficiency in scripting languages (e.g., SQL, Python).

Responsibilities:

• Design, develop, and deploy data tables, views, and marts in data warehouses, operational data stores, data lakes, and data virtualization platforms.
• Perform data extraction, cleaning, transformation, and flow, including web scraping as required.
• Build, launch, and maintain efficient, reliable large-scale batch and real-time data pipelines using data processing frameworks.
• Integrate and consolidate data silos in a scalable and compliant manner.
• Collaborate with cross-functional teams, including Project Managers, Data Architects, Business Analysts, and others, to develop scalable data-driven products.
• Develop backend APIs and manage databases to support applications.
• Participate in pair programming and code reviews with fellow developers.

Experience and Skills Required:

• Proficiency in data cleaning and transformation tools (e.g., SQL, pandas, R).
• Expertise in building ETL pipelines using tools such as SQL Server Integration Services (SSIS), AWS Database Migration Services (DMS), Python, AWS Lambda, and ECS Container tasks.
• Strong database design skills and experience with various databases (e.g., SQL, PostgreSQL, MongoDB, MySQL).
• Experience with cloud technologies (AWS, Azure, Google Cloud).
• Familiarity with big data frameworks and tools (e.g., Hadoop, Spark, Kafka).
• Proficiency in scripting languages (e.g., SQL, Python).

Responsibilities:

• Lead the planning, implementation, and management of secure system architecture.
• Oversee the development and optimization of automation systems to address system bottlenecks and ensure maximum service availability.
• Manage advanced CI/CD pipelines and automate integration and deployment in enterprise environments.
• Conduct infrastructure-level vulnerability assessments and troubleshooting.
• Implement enterprise-level security tools and ensure compliance with regulatory standards.
• Mentor junior engineers and guide organizational DevSecOps transformations.
• Design disaster recovery strategies, system backups, and restore protocols.

Requirements:

• Master’s degree in Computer Science, Cybersecurity, or equivalent.
• 5+ years of experience in DevSecOps roles.
• Advanced knowledge of cloud platforms, including Kubernetes and CNCF tools.
• Experience with enterprise security tools like Hashicorp Vault, Tenable, and Sonatype Nexus IQ.
• Security certifications (e.g., CREST) are highly preferred.
• Proven track record of success in DevSecOps transformations.
• Deep understanding of network infrastructure, including subnets, firewalls, and routers.

Job Description

• Industry/Organization Type: Marine Maintenance/Services
• Position Title: Service Engineer
• Working Location: Islandwide
• Working Hours: Flexible – must be on standby 24/7 to respond to client calls
• Salary Package: Up to $4,500 +OT + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Perform diagnostics, maintenance, and repair work on DF engines and other marine propulsion systems.
• Conduct routine inspections and troubleshoot engine issues to minimize downtime.
• Provide technical support and expertise to clients, ensuring optimal engine performance.
• Collaborate with the engineering team to develop and implement maintenance strategies.
• Prepare detailed service reports and documentation for all completed work.
• Ensure compliance with safety regulations and industry standards during all service activities.
• Travel to client sites as required to perform on-site maintenance and repairs.

APPLY NOW!!!

• At least a Diploma in Marine & Offsho, Mechanical Engineering, or Electrical Engineering.
• Minimum of 2 years of experience in engine repairs and maintenance, preferably within the marine industry.
• Experience with DF engines is highly preferred.
• Able to travel to client sites as needed, sometimes on short notice.
• The position requires flexibility in working hours, as the engineer must be on standby 24/7 to respond to client calls.
• Ability to work in varying environments and under pressure to resolve issues promptly.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68647 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/Organization Type: Design & Manufacture of Material Handling Systems
• Position Title: Project Engineer
• Working Location: Gul Circle (Transportation provided)
• Working Hours: Monday – Friday, 8.30 am – 5.30 pm
• Salary Package: Up to $5,500 + HP Allowance + VB
• Duration: Permanent

Key Responsibilities

• Manage and execute all phases of project delivery, encompassing engineering, scheduling, cost control, coordination, and on-site supervision.
• Prepare, submit, and keep track of all necessary project documentation and engineering records.
• Actively monitor project execution for timeliness and quality, promptly addressing and expediting any issues that arise to maintain progress.
• Coordinate with clients, subcontractors, consultants, and other related parties to ensure project specifications are met.
• Oversee the work performed by contractors to confirm adherence to quality standards and project requirements.
• Ensure customer satisfaction with the product delivered and the services provided.

APPLY NOW!!!

• Minimum Diploma in Mechanical Engineering or equivalent or with at least 2 years of relevant experience.
• Comfortable with working on weekends if required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68956 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Responsibilities:

• Perform feasibility study, concept design, front end engineering design (FEED) and detailed designs for concrete and steel structures in Energy and Industrial related facilities such as pile foundation, footings, pilecaps, pipe racks, sleepers, pipe bridge, equipment plinths, underground pipeline culvert, drainage, sewerage, road works
• Prepare related material take off (MTO) for cost estimates
• Prepare tender specifications, project requirement, carry out tender evaluation for projects
• Conduct project presentation to clients and stakeholders
• Project management for engineering works
• Perform authorities’ pre-consultation, submissions and liaison with authorities for necessary approvals and permits

Requirements:

• Degree in C&S Engineering, preferably from a university recognised by Singapore Professional Engineers’ Board (PEB), with strong competency in concrete, steel and foundation design.
• Able to perform concrete and steel structural analysis and design, and preferably also working knowledge in using application related to geotechnical design like Plaxis and Geoslope.
• Experience in marine facilities’ design would be an added advantage
• Minimum 5 years of relevant design experience in concrete, steel and foundation structures, drainage, sewerage and road works, preferably in a consultancy firm
• Candidate with more than 15 years of relevant design experience and/or a locally registered Professional Engineer will be considered for higher position
• Knowledge in Eurocodes, BS Codes. Knowledge in NFPA, API would be an added advantage
• Conversant with local authorities’ requirement, pre-consultations and submissions
• Experience in performing feasibility study, conceptual, FEED and detailed design, preferably, able to perform basic CAD drafting
• Possesses skill in project management, conducting presentation, effective communication and good report writing skills
• Good spoken and written English
• Fluency in spoken and written Chinese would be an advantage
• Able to travel for oversea projects at short notice