Be a catalyst for change and drive sustainability forward with us at The Westin Singapore, where your passion transforms into meaningful action.

As a Duty Engineer, you will be tasked to:

Install, maintain, perform room preventative maintenance and recommend replacement of tools, appliances, and equipment. Calibrate all controls, gauges, meters, etc. Identify, locate, and operate all shut-off valves. Order, mark, and stock parts and supplies as needed. Interact with guests as per The Westin Brand Standards. Maintain inventory and purchase orders log. Inspect tools, equipment, or machines. Enter and locate work-related information using computers. Operate power lift. Complete the life safety checklist, including the fire-pump run test and generator run test. Inspect fire sprinkler valves and alarm systems. Assist in development of disaster and emergency response protocols. Respond and attend to guest repair requests. Mentor and assist associates on duty. Liaise with departments (Front Office, Housekeeping, etc) on Guest Room Maintenance. Ensure timely maintenance of assets logged in Engineering System (Transcendent). Ensure Marriott Environmental Sustainability Hub (MESH) data compliance.

Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional and maintain confidentiality of proprietary information. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, and assist individuals with disabilities. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Speak with others using clear and professional language. Visually inspect tools, equipment, or machines. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight. Stand, sit, or walk for an extended period of time. Move up and down stairs and/or service ramps. Perform other reasonable job duties as requested by Supervisors.

Marriott International is an equal opportunity employer. We believe in hiring a diverse workforce and sustaining an inclusive, people-first culture. We are committed to non-discrimination on any protected basis, such as disability and veteran status, or any other basis covered under applicable law.

At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work,​ begin your purpose, belong to an amazing global​team, and become the best version of you.

About Us:

In OneSystems Technologies we provide peace of mind with end-to-end security and communication solutions, affiliation with core partnerships enables innovative and reliable integrated system opportunities across industries and applications. By optimizing your communication and security systems through our valued partnerships, we deliver smart and integrated turnkey solutions that meet diverse business needs.

Role Overview:

We are seeking a Project Engineer responsible for planning, coordinating, and overseeing project execution to ensure timely and successful delivery. This role involves reviewing system designs, supervising installations, and managing communication with stakeholders. Strong technical expertise, organizational skills, and attention to detail are essential for ensuring project quality and compliance

Roles & Responsibilities

• Assist in project planning and scheduling, ensuring timely execution and alignment with project goals.
• Coordinate with project stakeholders, contractors, and suppliers to facilitate smooth operations and address project requirements.
• Attend site meetings as required, professionally representing the company and providing technical insights.
• Ensure timely submission of personal timesheets, expense reports, project tracker updates, and other required documentation on a weekly basis.
• Review system designs before installation, identifying and addressing technical, functional, or compatibility issues while ensuring compliance with client standards.
• Supervise and manage installation teams, including internal technicians and local service partners, ensuring high-quality workmanship and adherence to project specifications.
• Provide regular progress updates to the Project Manager, supporting efficient resource planning and project execution.

Job Requirements

• Degree or Diploma in Electronic Engineering, or a related field
• 3 year’s industry experience working within security and communication systems installations, servicing, or design.
• Proven organizational and security system trouble shooting skills.
• Practical aptitude and ability to work independently, prioritize work schedule and make own decisions.
• Logical worker, able to work under pressure to meet deadlines and ability to prioritize well.
• High quality of work and a ‘can do’ attitude.
• Commercial awareness.
• IT literacy, preferably in MS Office. Knowledge of AutoCAD will be an added advantage.
• Demonstrable knowledge of IP technology and basic understanding of networking (e.g. Cisco, TCP/IP, routing, switching )
• Proficiency in communicating with Chinese stakeholders will be advantageous, as the client is primarily Chinese.

Job Responsibilities

• Ensure successful and timely execution of projects
• Work with Design Department on generating Workshop Drawings (GA / P&ID / Electrical drawings)
• Conducting Factory Acceptance Test (FAT)
• Attending site vists when required
• Engagement and coordination with sub-contractors and clients on projects

Job Requirements

• Minimally possess a Diploma in MechanicalEngineering
• At least 2 years of work experience in project management
• Positive attitude and committed to tasks dedicated
• Ability to manage multiple priorities and meet deadlines
• 5 days work week (Monday to Friday)

Responsibilities

Project Planning and Coordination:

Collaborate with the project management team to develop project plans, timelines, and budgets for HVAC projects.

Ensure compliance with project specifications, codes, and industry standards.

Coordinate and schedule project activities, subcontractors, and resources effectively.

Design Review and Analysis:

Review HVAC system design drawings and specifications to identify potential issues or improvements.

Perform engineering calculations and simulations to optimize system performance.

Provide input and technical guidance during the design phase.

Material Procurement and Vendor Management:

Assist in the procurement of HVAC materials and equipment.

Evaluate and select vendors and suppliers based on cost, quality, and reliability.

Maintain strong vendor relationships and ensure timely deliveries.

Quality Control and Inspection:

Implement quality control processes to ensure HVAC systems meet project requirements.

Conduct regular site inspections to verify workmanship and compliance.

Identify and address any deviations from project standards.

Documentation and Reporting:

Maintain accurate project documentation, including drawings, change orders, and progress reports.

Prepare and submit regular project status reports to the project management team.

Document and address any project-related issues or disputes.

Safety and Compliance:

Ensure that all HVAC installations comply with safety regulations and industry standards.

Promote a culture of safety among project team members and subcontractors.

Conduct safety audits and address any safety concerns promptly.

Client Communication:

Act as a primary point of contact for clients regarding HVAC project updates and inquiries.

Address client concerns and seek opportunities for additional services.

Budget and Cost Control:

Monitor project budgets and expenditures to ensure they align with project plans.

Identify cost-saving opportunities and implement cost control measures.

Qualifications

• Bachelor's degree in Mechanical Engineering or related field.
• 1-2 years of experience in HVAC engineering and project management.
• Strong knowledge of HVAC systems, design principles, and industry best practices.
• Proficiency in AutoCAD, HVAC design software, and project management tools.
• Excellent communication, leadership, and teamwork skills.

5.5 days /week

Mon - Fri : 0830 to 1730 hrs

Sat : 0830 to 1230 hrs

project EngineerOccupationContract EngineerJob Description & Requirements
Project Engineer ：

1. Work in Semi-con Industry· Career Development and Personal Growth·

2. Harmonious Working Environment and CultureJob DescriptionMain

Duties:·

1. Liaise with clients for the schedule and work method regarding maintenance activity·

2. Preparing Pre-Documents (Method Statement & Drawing) and post-report (Service report) for the maintenance jobs·

3.Coordinate with subcontractor for the maintenance jobs·

4. Manage and Control sub-contractors and monitor their work closely to keep site safe and neat· Supervise ongoing site activities closely·

5.Requirements:· Degree In Environmental Engineering/Civil Engineering or equivalent from Local Singapore recognized University.·

6.Able to work independently and eager to learn, team player.· Good interpersonal communication skill

As a Systems Specialist, will be providing support in the following areas:

a) Windows system administration, including PowerShell scripting, system hardening, patching etc.

b) Linux (SuSE and Redhat) system administration, including shell scripting, system hardening, patching etc.

c) Virtualisation (VMware) administration, including provision of resources, hardening, patching etc.

d) Knowledge in Security Remediation process (vulnerability assessment and patch management)

"e) Basic knowledge of the following:

• Storage technology and Storage area network

• Infrastructure troubleshooting (server, network and etc)

• Commercial Clouds (AWS, Azure and GCP)

• Dockers, Containers and Kubernetes Platform operations and administrations

• Server Anti-Virus Software and Patch Management Software

• Databases such as MS SQL, DB2 and etc"

Requirements

a) Strong background in IT, Computer Science / Computer Engineering, or related discipline

b) Minimum 3 years of relevant working experience in the above technology is preferred.

"c) Relevant experience in the following would be advantageous:

• Working with Docker Containers and Kubernetes

• Setting up and managing commercial cloud platform such as AWS, Azure or GCP

• Infrastructure As Code, IT Automation Tool such as Ansible, Puppet. "

d) Possesses good communication and interpersonal skills

e) Have good command of written and oral English

f) Must be able to work beyond business hours including weekend when necessary

JOB MISSION

The mission of the Commissioning Engineer is to ensure all system installations are carried out on schedule, and to both the clients and Northlands Standards. The Commissioning Engineer facilitates successful delivery through the testing, inspection and commissioning process while maintaining and improving standards where possible.

DUTIES

Outline the essential duties of the position:

• Work within the project delivery teams to engineer physical layout and system security designs or mark-ups.
• Review of system design prior to installation works and highlighting of any apparent technical, functional or compatibility issues with the design package while highlighting any deviation to client’s standards.
• Assist the project manager with onsite trades both external and internal ensuring that all security dependencies are aligned and completed on time to enable the project to be delivered successfully as planned for the clients FDOB (First Day of Business).
• Manage and execute onsite changes to the physical installation to meet Client and Northland standards as indicated within the agreed design package.
• Communicate on and offsite effectively the local service providers, clients, client project teams, and the Northland Project team.
• Problem solve by clearly discussing problems, clarify situations, and, to identify and explain possible solutions.
• Discuss with LSP (Local Service Partner) project details, requirements, identified problems, clarify updates, identify, and explain clear solutions.
• In-depth testing and troubleshooting of access control and IP network video systems.
• Basic population of programming sheets at the discretion of the assigned application engineer.
• Completes Project Testing Commission sheets, site plans, mark-up drawings, plangrid, and coordinates with the assigned application engineers in the commissioning process.
• Follow assigned projects to final adjustments, test, troubleshoot and rectify as part of the commissioning and signoff process.
• Ensure on-site clients are trained in the use of the installed system.
• Supervise and manage members of the installation team for both internal technicians and local service partners engineering teams while working on site.
• Verify the installation quality meets as a minimum the standards as defined within the security design package and in line with Northland best practice guidelines for security installation standards.
• Communicate progress on jobs and provide regular status reports to the Project Manager to enable efficient resource planning.
• Work on project pre-builds when required or inspect and verify the quality of builds completed by others are to client and Northland standards prior to being dispatched to sites.
• Partner with colleagues to improve and maintain standards across the company.
• Attend site meetings as required, representing the company in an effective and professional manner.
• Ensure prompt completion of personal timesheets, expenses, project tracker reports and any associated paperwork on a weekly basis.
• Work and maintain compliance with the Company’s Health and Safety standards and requirements; with the safety of self and others in mind at all time.
• Maintain confidentiality and be sensitive to client’s security requirements.
• Other duties as assigned.

QUALIFICATIONS

• Minimum of 4 year’s industry experience working within security installations, servicing or design.
• Relevant degree or certifications in Electronic Engineering.
• Experience /Certification on security systems like Lenel, Milestone, Genetec, Software House CCure preferred.
• Valid driver's license

SKILLS

• Excellent verbal and written communication skills.
• Highly organized and detail oriented.
• Practical aptitude.
• Ability to work independently under minimal supervision.
• Time-management
• Works well under pressure.
• IT literacy, MS Office.
• High level of knowledge in MS Excel.
• Demonstrable knowledge of IP technology.
• Basic understanding of networking (e.g. Cisco, TCP/IP, routing, switching

Responsibilities:

1. Communicate and coordinate with suppliers, customers, and internal departments to meet objectives and requirements, plan, monitor, and control the project within the deadline, including carrying out implementation of the project.

2. Ensure excellent customer relations and achieve customer satisfaction throughout the project.

3. Be responsible for installation, buy-off, and support of projects at customer sites.

4. On-site support and remote service support.

5. Provide troubleshooting expertise, technical training, and system documentation to customer and internal departments.

6. Assist in factory manufacturing and other technical activities.

7. Prepare cost estimation, budget, and control report.

8. Prepare reports on project progress and ensure the project schedule is being met.

9. Fulfill any other duties as and when assigned by the management.

Requirements:

1. Candidate must possess at least a Diploma/Bachelor's Degree in Engineering with a minimum of 5 or more years of working experience.

2. Experiences with machine vision solutions is an added advantage.

3. Able to work independently, and as a team player, commitment, and a sense of ownership are necessary.

4. Good interpersonal, management, and decision-making skills.

5. Able to travel with short notice and station overseas when required.

6. Excellent oral and written communication skills in English.

7. Communication skills in Mandarin (Chinese) are an added advantage.

5-day work week at Woodlands area. Able to start work immediately or on short notice is preferred. Only shortlisted candidates will be notified.

Responsibilities:

• Work out schedule for shop drawing preparation/approval and material approval/procurement based on master programme and monitor the status.
• Supervise BIM modeler to produce Structural & Architectural shop drawings and obtain Consultant’s approval.
• Review, coordinate, and liaise with Consultants and Subcontractors to develop the Construction details for Structural & Architectural works and the interface to other work trades.
• Ensure compliance with construction drawings, project specifications, client needs and regulations, and authorities' codes and standards.
• Verify site installation according to approved shop drawings and finalise as-built drawings

Requirements

• Master’s degree in civil engineering and/or Architecture
• Minimum 4 years’ experience in technical coordination and/or site supervision in mixed development projects
• Experience in RC structure and Steel structure Building projects.
• Experience in Building projects requiring Top-Down or Semi Top-Down method and Deep Excavation, more than 15m depth.
• Experience in coordination and/or supervision of Structural and Architectural works.

1. attend vessel to do service, repair, calibrate and troubleshooting of marine automation system.

2. with good troubleshooting skill

3. can communiate with customers and other team members

4. can handle elecctrical, electronics , penumatic control system

5. can travel to other countries ( Southeast aisa, etc) for jobs.

Our esteemed client, an established MNC, is searching for an QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: Monday to Friday
• Working Hours: 8:15 am - 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

1. Responsible to delegate new enquiries for processing by drafters and verify the output

2. Responsible to assign awarded projects to drafters to generate shop drawings, final material extract and related documents

3 Responsible for attending to customers complain on technical or quality issues and follow up until resolve

4. Responsible to identify and enlist the latest authority regulations with regards to technical specifications for present ation to management

5. Responsible to identify and enlist the latest authority regulations with regards to technical specifications for presentation to management

6. Responsible to conduct spot sampling and inspection for incoming material in Logistics warehouse

7. Responsible to compile presentation materials and upkeep database on technical matters for organisational knowledge.

8. Attend to internal meeting,

9. Ensure achievement of departmental and individual goal aligning with corporate goal.

10. Ensure the efficiency and sufficient manpower.

11. Ensure the achievement of yearly performance standard.

12. Ensure Technical Team abide with Company Directive and OPPs

Education Required:
• Bachelor’s degree in civil engineering

Experience Required:
• Minimum 3 years of experience in precast detailing coordination works for building projects as contractor or precast manufacturer.
• Experience in PBU and PPVC projects would be preferred.

Competencies and Skills Required
• Good knowledge in AutoCAD and MS Office. TEKLA/ BIM Software experience is added advantage.
• Proficient in MS Excel
• Knowledge in precast concrete products for residential or industrial building projects.
• Reinforced concrete structural detailing skills, detail presentation skills, communication and analytical capacity
• Knowledge in interpreting architectural and structural drawing for building projects.
• Communication skills with ability to express profile and steel detailing challenges.
• Ability to plan, organize and work independently.
• Proactive at exploring external references to improve job performance
• Promote team works to achieve common shared objectives

Job Description & Requirements

• Act as a client representative mechanical design engineer for JTC and various ministries for the development of building and infrastructure projects
• Formulating the project briefs for consultant tender
• Managing the consultants and reviewing their design drawings, technical calculations and specification, in the interest of the clients, from design until the project completion.
• Develop innovative solutions to integrate building and facility layout to optimize land resource.
• work with our partners and academia on technologies research and deployment as well as customers to provide solutions to improve production layout efficiency.
• plan and conceptualise new and advanced engineering related technologies areas in our building facilities.
• Also draft specifications, call tender, review and recommend tender awards as well as plan and implement annual budget and workplans.

Requirements

• Background in Mechanical Engineering, with at least 5 years of relevant working experience in consultancy & design or construction companies. Being a Professional Engineer will be an added advantage

Engineer possess a good design experience in design development ideally related to precision tooling, machinery or mechatronics assembly project realization, working collaboratively with cross functional teams internally and externally.

Engineer understands basic physical & mechanical principles, various manufacturing processes and technologies particularly in moulding, stamping, machining, adhesive etc and engineering research & development through analysis, prototyping & testing.

A well-rounded mix of experimental, theoretical and design skills. Aptitude in hands-on prototype lab work, including but not limited to debug, test, assembly & measurement jig design; commission the company’s product, jigs and fixtures, customized semi and fully automatic machines or assemblies.

Solid experience in fundamentals of geometric symbols & dimensions

Tolerance stack creation and analysis

Proficiency in 2D CAD and 3D modelling with other tools such as PDM, PLM etc

Duties and Responsibilities

1) Apply engineering principles to draft, design, modify, reverse engineering and develop new products

2) Intuitive in mechanical movement, function and performance.

3) Responsible for precision tools, jigs & fixtures, mechanical design

4) Project coordination to meet customer expectations and product specifications

5) Manage design activities from planning phase to final acceptance

6) Maintain and perform proper documentation controls complying with ISO9001:2015

7) Attend customer feedback, issue of quality defects and modification improvement.

8) Check engineering drawing, material/ quantity are reported to the customer specific work requirements to all relevant manufacturing processes

9) 5.5 day work week

Job Requirements

• Requires a Bachelor’s degree or diploma in the field of manufacturing, mechanical or mechatronics engineering

• Minimum 5 years of relevant work experience

• Demonstrate operations and technical skills

• Good analytical, project management and machining techniques

• Good interpersonal and communication skill and coordination work

• Meticulous, Independent and possess good organizational skill & planning control abilities

Looking for Device Engineer for east camp and west camp.

Job Description

• Perform Asset Management of Infrastructure and Computing Devices.
• Provide computer support services (Troubleshooting, patching, confriguration, testing and maintenance) for any supported software and hardware
• Work with 3rd parties vendors
• Provide Training, Coaching and orienting users on how to use computer devices
• Be responsible for completing assigned tasks on time and to the satisfaction of the users
• Must be able to handle helpdesk duties

Requirements

• Possess at least a Nitec in IT related qualification
• 1-2 years' experience in similar capacity with technical skills and experience supporting Computing Devices
• Proficient in Microsoft Words/Excel/Outlook
• Computing Devices Platform Supported: Windows, IOS and Android
• Professional competencies that include:
• Ability to work without supervision
• Good communication skills
• Customer service
• Army camp environment, office hours, 5 days work week
• Need MSD clearance which takes around 4-6 weeks before starting work

Job Overview

The Layout Engineer is responsible for designing and optimizing the general arrangement and layout of FPSO topsides, hulls, and related systems. This role ensures that all layouts meet project specifications, safety standards, and operational efficiency, while coordinating with multidisciplinary teams to achieve seamless integration of systems.

Key Responsibilities

• Design and Optimization:Develop and optimize layout designs for FPSO topsides, modules, and hull structures.
  Ensure designs comply with safety, operability, and maintainability requirements.
  
• Multidisciplinary Coordination:Collaborate with piping, structural, mechanical, electrical, and process teams to integrate systems into cohesive layouts.
  Resolve layout clashes and ensure effective utilization of available space.
  
• Compliance and Standards:Ensure all layouts adhere to project specifications, industry codes, and regulatory standards (e.g., ABS, DNV, API).
  Incorporate fire safety, explosion protection, and evacuation criteria into designs.
  
• Review and Validation:Conduct design reviews and model walkthroughs to validate layouts and address design issues.
  Use 3D modeling software (e.g., AVEVA E3D, AutoCAD) to produce accurate and detailed layouts.
  
• Reporting and Documentation:Prepare layout drawings, specifications, and technical documentation.
  Generate reports highlighting design progress and any potential risks or deviations.
  

Qualifications and Experience

• Education:Bachelor’s degree in Engineering (Mechanical, Civil, or related field).
  
• Experience:Minimum of 10 years in layout engineering for FPSO or offshore oil and gas projects.
  Familiarity with topsides, hull integration, and module design.
  
• Skills:Proficiency in 3D modeling software (e.g., AVEVA E3D, PDMS, AutoCAD).
  Strong knowledge of offshore layout design standards and regulations.
  Excellent problem-solving and coordination skills.
  

Preferred Qualifications

• Experience with FPSO conversion projects.
• Knowledge of weight control and material handling strategies in offshore environments.
• Certification in offshore safety and engineering practices.

Job Description

As a Design Engineer, you will report to and assisting Design Manager.

Key Responsibilities

1. Understand the project requirements and specifications. This includes the architectural, structural, and MEP designs, as well as the client's requirements for the M&E ACMV systems, that may be used for various purposes of calculations, cost estimations, design for specific results, or objectives of the company.
2. Develop the M&E ACMV design in accordance with the project requirements. This includes the selection of equipment, materials, and components, as well as the development of the system layouts and drawings.
3. Calculate and coordinate the M&E ACMV design with the architectural and structural designs. This ensures that the M&E ACMV systems are compatible with the overall design of the building for the purpose of value engineering and also design and safety, while achieving technical and engineering compliance for our systems.
4. Prepare the M&E ACMV specifications. This includes the detailed descriptions of the M&E ACMV systems, as well as the performance requirements and testing procedures.
5. Guide Bim Modellers to create the BIM models of the M&E ACMV systems to meet design specifications, and the BIM models may be used for visualization, clash detection, and coordination purposes.
6. Review and approve the M&E ACMV shop drawings. This ensures that the M&E ACMV systems are constructed in accordance with the design.
7. Monitor the installation of the M&E ACMV systems. This ensures that the systems are installed correctly and that they meet the performance requirements.
8. Provide testing and commissioning compliance factors for the M&E ACMV systems. This includes testing and adjusting the systems to ensure that they are operating properly.
9. Continuous learning to further develop new methodologies, adoption of tools or techs for use in innovative solutions and any other scopes deemed necessary as part of job designation.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills:Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage. Inexperienced candidates must be willing to learn, with training provided.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

MAJOR RESPONSIBILITIES:

1) Execution of projects:

Ensure the successful and timely execution of projects professionally within the budgetary cost and contractual completion time given by the Sales Department.

Ensure the accurate documentation of all activities /transactions.

Preparation of Bill of Materials (BOM)/production order before the commencement of the kick-off meeting.

2) Payment: Check with the Sales Department about the down payment, LC, or other payment methods before the commencement of procurement of items.

3) Workshop Drawings: After populating the BOM with all the items, work with the Design Department on generating Workshop Drawings

(GA / P&ID / Electrical drawings).

Obtain the client’s official approval on all drawings before

any commencement of works.

4) Engineering: Check the correct sizing of components (e.g. motors, pumps, valves & instrumentations).

In case of any changes, ensure other related components are correctly sized.

5) Master Production: Update the Master Production Schedule (MPS) and inform relevant departments of the strict compliance to

the delivery schedule, in consultation with the GM.

6) Kick-off Meeting: Mini-lead project kick-off meeting for the dedicated

projects handled with all critical information established

(e.g. BOM, Gantt chart, lead time)

7) Lead Time: Consistent follow-ups and confirmation from

Procurement Department on the ETA especially lead-time and technical specifications with the help of the

Design team.

: Communicate with customer in case of any changes

after discussion with the Sales Department, if authorized by

GM.

8) Factory Acceptance Test

(FAT)

: Attend together with the Engineering Department to

ensure complete factory testing is accomplished before

generating the in-house testing reports as records for the client

before delivery of the project.

9) Site Visit / Meeting: If necessary, attend and write minutes of meeting for

recording purposes at the site; and insert these in Project

File, provided site meetings are held.

10) Sub-contractor: Engagement and coordination with sub-contractors

services upon approval of GM for any ongoing projects.

Ensure the quality of sub-contractor work is strictly

according to requirements.

• Salary Range: S$3,500 – Maximum S$4,000 (depends on experience and profile)
• Working Location: (the nearest MRT is Tuas West Road - 3 mins walk)
• Working Hours: 8.00AM to 5.30PM, Monday to Friday (5 days work week)
  • A minimum Diploma in Mechanical Engineering – only this field of study is accepted.
  • Must have at least 2 years of Project Management experience.
  • Possess knowledge in AutoCAD 2D and 3D drawing.

The candidate will be responsible for maintaining IT Infrastructure network and application assets among multiple office locations.

Responsibilities:

• Managing corporate hardware (Fireworks, Networks Hardware, Servers, NAS (Synology), Open VPN System, etc)
• Installing, configuring, testing and maintaining operating systems, corporate application software and system management tools.
• Maintain and update corporate software and licenses.
• Ensure the highest levels of systems and infrastructure availability and security.
• Ensure all IT Asset inventory documentation and license renewals are updated frequently.
• Maintain security, backup and redundancu strategies.
• Identify possible areas to automate processes for the overall infrastructure (Alert, dashboard, etc)
• Monitoring of production envinroment status with the DevOps team.
• Provide remote co-support to other countries.

Requirement:

• Minimum 3 years of relevant experience
• Possess good communication skills.

Other information:

• Working hours: 9am - 6pm (Monday to Friday)
• Overtime may required occasionally (server down, etc)
• Location: Ubi Avenue 3, Vertex Tower
• 12 months contract (renewable)

Roles & Responsibilities

1. Must play a vital role in ensuring that these systems function correctly and integrate seamlessly with the building's electrical infrastructure.

2. Electrical engineers ensure that fire protection systems have access to emergency power in case of a mains power failure. This may involve designing backup power systems such as generators or battery backup systems to ensure uninterrupted operation during emergencies.

3. Proficiency in software like AutoCAD Electrical, PDMS Revit, or similar.

4. Knowledge of electrical principles, codes, and standards.

5. Expertise in circuit design and power distribution.

6. Electrical engineers design and install fire alarm systems, including smoke detectors, heat detectors, manual pull stations, and notification appliances such as horns, strobes, and speakers. They ensure that these systems meet code requirements and provide timely and effective notification of fire events to building occupants and emergency responders.

7. In larger buildings or complexes, fire protection systems may require communication capabilities to coordinate responses and relay information to emergency services.

8. Electrical engineers design and implement communication systems such as voice evacuation systems or interfaces with building management systems.

9. Electrical engineers may be involved in testing and maintenance activities for fire protection systems, ensuring that electrical components are functioning correctly and that backup power systems are operational.

10. Electrical engineers ensure that all electrical aspects of the fire protection system comply with relevant codes, standards, and regulations, such as NFPA, NEC (National Electrical Code), and local building codes.

11. Electrical engineers may provide training to building staff on the operation and maintenance of electrical aspects of the fire protection system. They also ensure that comprehensive documentation, including wiring diagrams, equipment specifications, and maintenance procedures, is available for reference.

Requirements

• Six days work Mon – Friday (8.00 am to 5.00 pm) & Sat 8.00 am to 12.30 pm) 44 hours weekly.
• Minimum Diploma in Engineering from Local Polytechnic.
• Electrical major
• Minimum 2 - 3 years Experience
• Singapore Citizen or Singapore PR
• Work on Site

Site engineers work chiefly on construction projects. They form part of construction management and use their skills and expertise to guide crew members and ensure the successful completion of a project. Site Engineers frequently liaise with clients and negotiate with vendors and suppliers to secure the best deals.

Quality Engineer

Roles & Responsibilities

This position is responsible for the timely, accurate, efficient preparation and management of Quality System, Quality tracking, Quality assurance & Quality control.

1. Full responsibility of Quality Assurance and Quality Control function to ensure Products quality are meeting customer’s expectation and accordance with regulatory requirements. (Throughout Product Life Cycle)

2. Update and maintain company Quality Management System and Documentation

3. Conduct internal audit and continuous improvement on departmental process

4. Responsible for Customer audit and ISO9001 certification.

5. Prepare for AS9100 certification and implementation.

6. Drive continuous improvement projects that lead to Product Quality and Operational Excellence.

Qualifications & Requirements

1. Bachelor’s degree with at least 3 years relevant working experience.

2. Diploma with at least 5 years relevant working experience may apply.

3. Strong knowledge of Quality system, such as ISO9001/AS9100 and other regulatory compliances.

4. Experienced on Supplier Quality management, In-coming, In-process, Outgoing inspection.

5. Preferably Electronics/Communication industry.

6. Familiar with internal & external audits.

7. Strong communication skill.

8. Possess ERP experience will be added advantage.

9. Fluent in English and Mandarin.

Responsibilities:

• To provide engineering support to the Project team from validation phase to project implementation

• To identify type of material and equipment requirement during validation phase.

• To involve in preparation and submission of engineering submittals.

• Programming of devices & creating and programming graphics in accordance with the project requirement.

• To assist in Test and Commissioning of system equipment.

• To assist in preparation and submission of operation and Maintenance Manuals.

• To provide Bill of Quantity for the projects.

• Any other duties as assigned by superior

• Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements:

• Diploma/ Degree in Engineering or Building Control in relevant field

• Min 1-2 years of relevant work experience

• Experience in PLC programming is added advantage

• Experience in handling energy management systems/ HVAC systems/ Chiller Plant systems/ Building Management Systems will be a plus

• Knowledge of IT networking and database programming, Function Block programming, Structured Language Programming or HTML5 programming will be of added advantage

• Knowledge of industrial system protocols like BACnet, Modbus, LONTalk

• Strong customer management and problem solving skills

• Able to work with the team and self-motivated

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

Responsibilities

Planning: Set out the site, level it, and survey it

Design: Check plans and drawings for accuracy

Materials: Oversee material selection and requisition

Construction: Supervise and monitor the work of contractors and the site labor force

Compliance: Ensure compliance with regulations, safety standards, and sustainability policies

Communication: Liaise with clients, contractors, subcontractors, and other stakeholders

Reporting: Prepare reports for clients and other stakeholders

Costing: Prepare estimates for time and material costs

Quality: Ensure quality standards are met

Health and safety: Ensure health and safety standards are met.Skills and qualifications

Technical skills in civil, structural, geotechnical, building services, mechanical, or electrical engineering

Understanding of the construction industry

Good business acumen

Strong leadership skills

Ability to form strong relationships with clients, contractors, and other stakeholders. SALARY:3,800-4,000

LANGUAGE kNOWN: ENGLISH,TAMIL,

AGE:30 AND BELOW

EXPERIENCE: 5 YEARS

RACE:INDIAN