Job Responsibilities

• Responsible for the design and development of CMOS and SOI analog Integrated circuit designs for mobile handset applications.
• The candidate will work within a group of analog/RF IC design experts and be assigned to a multi-chip module product team with typically 3 to 5 design engineers.
• The candidate will interface with design management and module design teams to create the detailed specification, report design progress, and to collect, track, and resolve any performance and circuit design issues.

Job Requirements

• Possess a BS degree (MS is preferred) and 2 years of experience in analog IC design.
• Demonstrate experience in analog or RF IC design at the chip level.
• Have understanding of the basic device physics with the ability to develop and use advanced linear and non linear models or simulation techniques
• Able to translate between the model, simulation, physical implementation, and the measured performance of a device.
• This job also requires experience in simulation tools, analog circuit test characterization techniques and equipment.
• Proven track record in using Cadence or similar analog IC design tools and hands-on experience with lab measurements and characterization equipment.

Our Company (Tigris) is a Singapore-based project development company, focusing on Environmental and Sustainability Projects, such as water/wastewater/waste treatment, energy optimization and efficiency systems, distributed renewable energy, etc.

Tigris is active in India, the Philippines, Indonesia and Singapore. Tigris works with environmental engineering firms in these countries to develop, finance, operate and maintain Environmental and Sustainability solutions to customers, including commercial, industrial and residential end-users.

www.tigris.com.sg

Job Description:

Primary Role: Responsible for techno-engineering work during the project cycle, from evaluation, implementation through to operations / maintenance, including:

• Pre-investment technical due diligence, such as review of engineering and process design, comparing capex/opex estimates to industry benchmarks, technical capabilities of EPC contractors, etc
• Supervision during implementation, such as:
  • Verify whether project-related EPC and investment agreements are being met.
  • Physical status of the work implemented on site.
  • Judge and report the quantum of finance contributed and used for the project.
  • Estimated expenditure for the project over observed progress.
  • Review and comment of Statutory Approvals and Clearances.
  • To check whether physical progress is in line with project implementation schedule and planned project timelines.
  • Review the drawdown schedule for the planned project activity.
• Oversee operations and maintenance of project investments, to ensure O&M contractors are performing their roles, and projects are being managed in line with budgets and contracts

Secondary Role: Support Business Development / Commercial / Investment work, i.e. identify and contact potential environmental projects which Tigris can invest in, including in India, Philippines, Indonesia, Singapore, and over time, to work with local partner companies on project development and business strategy.

Skills

Candidates should have the following:

• 5 to 10+ years of relevant work experience gained (e.g. in a Water, Engineering/Construction, or Consulting Company)
• Proven ability for critical / logical thinking and problem solving
• Strong co-ordinator & team player
• Self-motivated, well-organized and can-do attitude
• Strong communication skills. Ability to work very independently in a small team
• Evidence of high performance standards in previous position(s)

On job training to be provided

• Study and analyse utilization of the network capacity resources, plan and implement changes to optimise and expand the network.
• Generate monthly reports via digital inventory to monitor network utilization, analyse trends and provide suggestions for improvement.
• Ensure all inventory assets, utilization, circuit routings are updated in the digital inventory in a timely manner.
• Streamlined process for inventory control, to achieve leaner and efficient operations.
• Document network design, configurations topology diagrams for ongoing processes, references and training purposes.
• Collaborate with various internal stakeholders such as AM, CS, PM for capacity request and new sales order.
• To work with external parties including bilaterial partners and vendors.
• Perform Ad-hoc restoration during outage, plan restoration using existing available capacity within specific SLA.
• Manage different projects, monitor timeline and resources to ensure project delivery within specific timelines.
• To remain on standby via call during assigned week to support Operations and respond to urgent request and outages for circuit restoration.
• Go on site for assigned activities to work with vendors for system planning and implementation and migration activities.
• Perform all other duties and responsibilities as assigned by supervisor.

Skills for Success:

• Nitec / Diploma in Engineering/Telecommunications or in relevant field.
• Goal-oriented with good analytical skills to solve problem. Candidate must be committed and driven to deliver projects assigned on time.
• Able to work independently with minimum supervision.
• Experience in telecom environment with focus on transport network, optical transmission and ethernet technologies.
• Good understanding of transport network architectures including OTN and Ethernet, DWDM.
• Good technical skill set with knowledge of L2 and L3 networking and strong understanding of TCP/IP, IP addressing, and routing protocols.
• Experience with networking hardware from major vendors.

Overall Job Purpose

To independently determine and draft the Requisitions for packages of mechanical components and / or equipment that are required in a project, assists in evaluating the technical aspects of bids and executing in order to deliver the packages on time and to ensure that the packages meet the technical requirements.

Core Responsibilities

• Understands the specifications and requirements in the area of mechanical components and equipment (such as compressors, heat exchangers, pressure vessels, pumps etc.) of the assigned project.
• Independently develops technical specifications and attachments that are part of Requisitions.
• Independently evaluates the technical and engineering aspects as well as issues related to components delivery of bids received from suppliers and gives assessment to the Senior Engineer.
• Generally, Senior Engineers are assigned complex packages and / or medium risk equipment
• Upon award to the successful tenderers, executes the orders for complex and / or medium risk packages by ensuring that documents (such as data sheets, drawings etc.) provided by the suppliers are complete, accurate and in order.
• An example is the specifications and information related to the interfacing between the mechanical component and other components.
• Being the focal point in respect of those packages handled, liaises and coordinates with various internal stakeholders, other discipline engineers, quality team, Engineering contractors and suppliers, ensuring that their needs are met timely and according to the specifications.
• Periodically visits suppliers, checks and tests the packages and their components to ensure that they function as per specifications. Occasionally, has to work with the suppliers to rectify the components making sure that they comply with the specifications and are ready on time
• Provides technical/engineering support and advice to Construction/Commissioning work at site, trouble shoots and follows up with suppliers to rectify the defects or problems.
• Resolves technical issues independently that may arise during the execution of packages handled using expert knowledge and technical know-how, and takes part in HAZOP workshop related to the assigned package and ensures recommendations are incorporated in the completed package with appropriate HAZOP close out.
• Is responsible for capturing lessons learned in his/her functional area, entering in MIMS, and closing out project related MIMS actions.

Qualifications & Experience

• Bachelor in Mechanical Engineering
• 12 years or more of relevant working experience in Mechanical engineering in oil and gas sector.
• Is aware of

1. Applicable industry standards, Company standards, specifications and procedures for his functional area;
2. Expert knowledge in the application of mechanical components such as pressure vessels, heat exchangers, pumps, compressors, Generators etc and market practices in the oil and gas sector.

Brunel International S.E.A Pte. Ltd

UEN No: 199603098R

EA License No: 16S8067

Shinu Alexander: R1657042

Responsibilities:

• Report directly to Mechancial Department Head in all matters
• Supporting Engineers and Senior Engineers in day to day operation
• Supervise and ensure safety of vessel maintenance and repair works.
• Leading a team of Technician to perform repair and maintenance onboard ships
• Carry out troubleshooting and rectification of mechanical/diesel defects.
• Perform joint inspection and acceptance with ship representative
• Hands on work in rectification of defects and maintenance of mechanical components
• Ensure quality of work performed by ownself and technician deployed
• Assist in logistic support, lifting of equipment and workshop equipments etc

Requirements:

• Diploma in Mechanical / Marine Engineering
• Able to use IMTE Tools such as Torque Wrench, Pressure gauges, Internal and External Micrometer
• Able to work under pressure
• Able to work in a team
• Able to perform hands on work
• Able to work in shipyard environment – heat, grease, dust
• Proficiency in Microsoft Word, Excel
• Only Singapore Citizens will be considered for this role

Other Information:

• Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Our client is a leader in the Water Treatment industry in Singapore. Due to their current expansion plan, they are looking for a Commissioning Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibility

• Responsible for testing and commissioning of water and wastewater facilities, including onshore and offshore projects.
• Develop and execute comprehensive commissioning and startup plans.
• Create detailed procedures for testing, cleaning, and initial equipment/system startup.
• Coordinate with clients, vendors, and subcontractors during system startup activities.
• Design and deliver training programs and materials for process plant operations.
• Oversee and document all commissioning activities, including data collection, as-built records, O&M inputs, and design feedback.
• Communicate effectively, both verbally and in writing, with all stakeholders.
• Foster and maintain strong working relationships with all project contacts.
• Focus on customer satisfaction to support broader organizational objectives.
• Contribute to knowledge sharing and the effective use of business and technical insights.
• Ensure health and safety standards are upheld and promote a safe work environment.
• Address safety concerns responsibly and help improve safety practices.
• Stay updated on industry trends and advancements through networking and professional development.
• Maintain a positive, solution-oriented approach, providing constructive feedback when needed.
• Participate in progress and commissioning meetings.
• Compile and deliver all required commissioning documentation and reports.
• Any ad-hoc duty as given

Requirement

• Min Degree in Chemical Engineering and/or Degree in Engineering (Mechanical)
• Min 10 years of experience in Water and Waste Treatment or Oil and Gas onshore/offshore experience.
• Experience in project management / plant testing & commissioning / facility setup will be an added advantage

Proficiency using Microsoft Office and Microsoft Project, good report writing skills

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Overview

We are looking for result-driven candidates who would thrive under a fast-pace working environment and having a strong desire to make an impact in their organization.

What you will do

• Own the entire layout implementation process: schedule estimation, floorplanning, layout construction, physical verification and memory compiler leaf-cell creation
• Implement top quality layout which meet the specifications set forth by designers and layout leads while meeting the project objectives and milestones
• Diligently perform all physical & reliability verifications (DRC/LVS/ERC/etc.) on the layout designs and ensure the database is fully compliant with all requirements of tape-out flow
• Work closely with multi-functional members to optimize layout realization according to the desired power, performance and area optimization requirement
• Candidates with strong soft skills could be tasked to undertake project management, coaching of new hires/interns or workflow improvement initiative

What you bring

• Bachelor’s degree in Electrical/Electronic/Computer Engineering or equivalent
• WIth direct experience in custom Memory layout implementation (SRAM/ROM/TCAM/CIM) in advanced finFET/GAA process nodes
• Proficient in understanding DRM of advanced CMOS technologies and have a good understanding of deep sub-micron and DFM issues (eg. WPE, LOD effects, etc.)
• Strong knowledge in floor-planningtechniques at different hierarchies, with emphasis on power mesh planning, critical block placement, critical signal routing and top-down integrationflow
• Strong knowledge in executing and debugging various physical verification checks like DRC, LVS, ERC, Antenna, Density, ESD, LUP, EM, IR, etc
• Proficient in Synopsys/Cadence layout editors
• Ability in script programming (eg. Python, Tcl, Perl or C-shell) is a plus
• Team player and effective in cross-team communication and time management

Location: One North, Singapore

Why MediaTek

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

My client is a Construction company located at Tiong Bahru.

Customer Support Engineer

Working Hours : Mon to Fri (office hour)

Key Responsibilities:

• Prepare and issue accurate quotations based on customer requirements and follow up on potential sales.

• Liaise with Site Engineers to understand customer needs and provide necessary support.

• Assist in the preparation of sales proposals and offer technical solutions where appropriate.

• Liaise with the Operations and Purchasing teams to ensure timely sourcing of products to meet customer demands.

• Support purchasing roles by ensuring that materials and products are sourced in line with customer requirements and job timelines.

• Assist in sourcing and evaluating products and suppliers, negotiating pricing, and ensuring lead time clearly defined.

• Handle general customer inquiries through calls, emails and WhatsApp to resolve issues in a timely and professional manner.

• Provide administrative support for sales meetings, product presentations, and other related events.

• Track and monitor customer satisfaction and dissatisfaction, addressing issues where necessary to enhance the overall customer experience.

• Escalate unresolved issues to the Section Team Lead/ Sales Manager or relevant departments for further action.

• Perform ad-hoc administrative tasks as assigned by the Section Team Lead or Sales Manager.

Requirements:

• Exposure in Engineering or a related field preferred.

• Experience in sales support or customer service roles is an advantage.

• Excellent communication and interpersonal skills.

• Proficiency in MS Office applications (Word, Excel, Outlook) and experience with CRM systems.

• Ability to handle multiple tasks, work under pressure, and meet deadlines.

• Design, deploy, and manage containerized applications and infrastructure to ensure reliability and scalability across development, staging, and production.
• Oversee and configure cloud resources, including compute, storage, networking, and security, to support multi-cloud infrastructure.
• Streamline build, test, and deployment processes to support continuous integration and delivery across multiple environments.
• Enforce security best practices across cloud, CI/CD, and virtualized environments to safeguard applications and data.

Requirements:

• Degree in Computer Science or equivalent.
• Cloud certified
• At least 3 years of relevant working experience
• Proficient in Python or other programming languages for automation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Good degree in Civil / Structural Engineering from a recognized University
• Minimum 5 years working experience in Civil & Structural Consultancy Firm
• Experience in LTA – Road work would be advantages
• Ability to work independently
• Candidates without the relevant working experience but with good academic results may be considered

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

On your day to day:

• Handle multiple projects and provide network design and deployment support from project initiation to closure.
• Follow network standards and configuration templates to prepare Network Design Documents (NDD) and submit for review and approval. Create Build Packages that includes implementation plans, test plans and network changes.
• Oversee the deployment of Build Packages on the corporate data network. Implement network changes during the allowed weekend green zone window.
• For some large/complex projects, you will be required to represent network domain in a virtual team and effectively communicate and liaise with business/technical stream owners.
• Assist with knowledge transfer of new products to internal teams.
• Assist in the development of & implementation of processes to allow repeatable designs with the view of provisioning automation and efficiencies.
• Prepare and submit all required project documentations for audit purpose & project closure

Qualifications:

• Proven experience (5+ years) working with Cisco and Arista network devices (routers and switches).
• Minimum of at least CCNP or equivalent.
• Strong working knowledge of following routing protocols: BGP, OSPF.
• Experience on WAN technology, e.g. Metro Ethernet, MPLS. VPLS, IPLC etc.
• Preferable with working experience on using Multicast in a Cisco/Arista environment.
• Preferable with working experience in large financial or banking network operation/implementation team.
• Ability to effectively communicate to internal clients through all available mediums (verbal, listening, writing, presenting).

Key Responsibilities:

• Design, develop, and execute automated test scripts using Tosca.

• Ensure automation coverage for regression, smoke, and integration testing.

• Perform end-to-end (E2E) testing to validate workflows and integrations.

• Conduct database testing to verify data accuracy, consistency, and integrity.

• Execute User Acceptance Testing (UAT) in collaboration with business stakeholders.

• Document and track test cases, test results, and defects using HP QC/ALM and Microsoft Azure DevOps.

• Ensure timely reporting and resolution of defects.

• Maintain and update regression test suites to reflect new functionality and defect fixes.

• Validate critical system functionalities during release cycles.

• Collaborate with development teams to test interfaces between components and systems.

• Validate APIs, microservices, and data flows across platforms.

• Leverage Azure DevOps for continuous integration/continuous deployment (CI/CD) pipelines.

• Integrate test automation into the DevOps pipeline to support continuous testing.

Required Skills and Qualifications:

• Hands-on experience with Tosca for test automation.

• Minimum of 3 years of experience in Software Testing.

• Bachelor of engineering or similar relevant industry experience.

• Strong knowledge of E2E, regression, smoke, integration, database, and UAT testing methodologies.

• Proficiency in using HP QC/ALM and Microsoft Azure DevOps for test case management and defect tracking.

• Experience with SQL and other database technologies to validate backend data.

• Familiarity with Azure DevOps pipelines and continuous testing practice

• Experience with Agile and DevOps methodologies.

• Knowledge of API testing tools (e.g., Postman, SoapUI) and performance testing tools.

• ISTQB or other relevant certification in software testing

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

• Develop and promote overall corporate and Data Centre sustainability goals as direction for all initiatives, including promoting decision- making based on financial and sustainability goals.
• Develop and run systems to make reporting and information sharing more efficient, accurate and impactful. Work with stakeholders to develop and achieve their key performance indicators
• Manage the development of sustainability communications internally and externally. Create continual educational resources on sustainability issues
• Institutionalize sustainability through documentation and quarterly review of policies e
• Manage and track corporate sustainability goals and metrics, analyze data and produce regular reports. Run regular audits as information-gathering exercises for content generation
• Keep abreast with trends and industry leading best practices in sustainability

Requirements

• Diploma / Degree in Electrical / Mechanical Engineering with background in Sustainability
• Preferably 1 - 3 years' of working experience in related fields
• Good verbal and written communication skills
• Good interpersonal skills, meticulousness, and a strong desire to learn.
• Knowledgeable and continually curious about current best practices in corporate responsibility, environmental efficiency, sustainability reporting
• Knowledgeable of Local and International standards such as BCA Green Mark for Data Centre and Buildings, SS564 Green Data Centre, ISO 14001 Environment Management System, etc
• Strong analytical and project management skills to track progress and reporting
• Motivated self-starter, resourceful, and independent

We are seeking a technically sound Business Development Executive or Engineer with a minimum of 5 years of experience in the field of Process, Energy, and Utilities. The ideal candidate will have a degree in an Engineering field and be capable of selling energy solutions, understanding customer and process requirements, and adapting solutions and proposals accordingly.

Key Responsibilities:

• Identify and develop new business opportunities in the energy sector.
• Understand and present energy solutions to customers.
• Analyse customer requirements and processes to offer tailored solutions.
• Develop and deliver compelling proposals and presentations.
• Build and maintain strong relationships with clients and stakeholders.
• Stay updated on the latest technologies and trends in energy solutions.
• Participate in training programs to enhance knowledge of various technologies and energy solutions.

Requirements:

• Minimum 5 years of experience in the Process, Energy, and/or Utilities field.
• Degree in Engineering or a related field.
• Strong technical understanding of Process / Energy Solutions and Technologies.
• Good communication and presentation skills.
• Ability to understand and adapt to customer requirements.
• Outspoken and confident in selling and presenting solutions.
• Self-motivated and results-driven.

Benefits:

• Competitive salary and benefits package.
• Opportunities for professional growth and development.
• Training to enhance knowledge of various energy solutions and technologies.
• Collaborative and dynamic work environment.

If you are a driven and technically proficient individual with a passion for energy solutions, we would love to hear from you.

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyze and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Bachelor’s degree in computer science, Software Engineering, or a related field (Advanced degrees are a plus).
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis)
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.

Job Title: NLP Research Scientist

Job Responsibilities:

Responsible for leading and driving innovative research and development in the field of NLP technology to address the fundamental challenges and core issues in language models, knowledge representation, machine translation, dialogue systems, and text generation. Achieve high impact through the publication of influential papers and the creation of valuable patents. Proactively explore and identify new applications for these cutting-edge technologies.

Job Qualification

● Possess a strong foundation in deep learning, machine learning, and natural language processing, including a thorough understanding of common models. Capable of selecting appropriate models and devising effective technical solutions for problem-solving purposes.

● Demonstrated outstanding publication records in top-tier international conferences and journals like ICLR, ACL, NeurIPS, EMNLP, TACL, etc. Preference given to individuals with experience in LLMs.

● Proficient in popular deep learning frameworks like PyTorch, with comprehensive knowledge of key deep learning models such as Transformer, BERT, GPT, RNN, LSTM, and their implementations.

● Exceptional organizational and communication skills, self-motivated and capable of handling pressure. Possess a strong enthusiasm for acquiring knowledge and a genuine passion for technology.

• Good knowledge and hands on experience working with software and hardware systems in the area of:
  • IP CCTV System
  • Perimeter Protection System (PPS)
  • Physical Security Information Management System (PSIM)
  • Video Management System (VMS)
  • Audiovisual System
• Analyze, plan, implementation (network, system, infra, applications), testing, and management of a state-of-the-art integrated perimeter, video surveillance and video analytics security system.
• Work closely with team members to meet client’s service delivery level agreement
• Able to work and coordinates with contractors and clients
• Works with partners to diagnose and rectify technical issues as well as support preventive and corrective maintenance
• Understands technical documentation, installation manuals, system drawings etc.
• Able to read and orientate construction drawing, floor plan, etc.
• Continuously looking to improve processes as well as introduce new technologies for better security and greater customer satisfaction
• Proficient in electrical power and good knowledge on power cabling works for on-site works
• Understands technical documentation, manuals, as-built system drawings etc.
• Works independently without supervision and communicates well with team members, partners, and clients
• Assists maintenance team to ensure System Availability and Reliability meets customers’ requirement
• Carries out any other technical related duties that may be required
• With knowledge on construction site safety and regulatory requirements
• Diploma in Information Technology, Electrical / Electronic, Information Systems or equivalent discipline
• 1-3 years of relevant experience in security surveillance hardware and software administration, configuration, and troubleshooting
• Positive work attitude, self-motivated, creative, and resourceful with a customer first mind set
• Independent, hardworking, and able to work under pressure
• Able to handle emergency situations outside of normal work hours when required
• Good inter-personal, organizational, problem solving and teamwork skills.

• Identifying new clients while nurturing and strengthening relationships with existing key accounts
• Provide quotation for project tender and technical support to stakeholders.
• Participating in site meetings and providing after-sales support with proactive follow-ups.
• Fostering and nurturing strong, collaborative relationships with customers.
• Any other adhoc duties as assigned

Requirements:

• ITE/ Diploma in Electrical / Electronics engineering or equivalent
• Min 2 years experience in related fields
• Working Hours: Monday - Friday (8.30am - 6.00pm)
• Location: Ubi
• Salary: Up to $6500
• Possess own vehicle

How to apply:

Interested applicants kindly state your expected salary, last drawn salary and starting date.

We regret to inform that only shortlisted candidates will be notified.

Log on to www.e-cruitteam.com.sg for more job opportunities!

EA Personnel: Teo Kai Xin, Joey

EA Reg ID: R23114229

EA Licence No.:19C9603

• Good knowledge and hands on experience working with software and hardware systems in the area of:
  • IP CCTV System
  • Perimeter Protection System (PPS)
  • Physical Security Information Management System (PSIM)
  • Video Management System (VMS)
  • Audiovisual System
• Analyze, plan, implementation (network, system, infra, applications), testing, and management of a state-of-the-art integrated perimeter, video surveillance and video analytics security system.
• Work closely with team members to meet client’s service delivery level agreement
• Able to work and coordinates with contractors and clients
• Works with partners to diagnose and rectify technical issues as well as support preventive and corrective maintenance
• Understands technical documentation, installation manuals, system drawings etc.
• Able to read and orientate construction drawing, floor plan, etc.
• Continuously looking to improve processes as well as introduce new technologies for better security and greater customer satisfaction
• Proficient in electrical power and good knowledge on power cabling works for on-site works
• Understands technical documentation, manuals, as-built system drawings etc.
• Works independently without supervision and communicates well with team members, partners, and clients
• Assists maintenance team to ensure System Availability and Reliability meets customers’ requirement
• Carries out any other technical related duties that may be required
• With knowledge on construction site safety and regulatory requirements
• Diploma in Information Technology, Electrical / Electronic, Information Systems or equivalent discipline
• 1-3 years of relevant experience in security surveillance hardware and software administration, configuration, and troubleshooting
• Positive work attitude, self-motivated, creative, and resourceful with a customer first mind set
• Independent, hardworking, and able to work under pressure
• Able to handle emergency situations outside of normal work hours when required
• Good inter-personal, organizational, problem solving and teamwork skills.

Responsibilities:

• Gather and analyse user requirements and translate them into application specifications.

• Analyse, design, test, implement, and maintain application systems or web-based applications.

Requirements:

• At least 5 years of experience in systems analysis, design (include database design), development, implementation, and quality assurance.

• Good communication, project management, strong analytical, problem-solving skills.

• Proficiency in both Java and DevOps

Technical Specifications:

Experience in one or more of the following:

Frameworks:

o Angular/ AngularJS

o Apache Spark

o Hibernate

o Java Persistence API (JPA) Framework

o Node.JS

o Oracle Application Development Framework (ADF)

o PrimeFaces

o React Framework

o Spring Framework (Spring Batch, Spring Boot, Spring Web)

o Structs

Integrated Development Environments (IDEs):

o Eclipse

o JDeveloper

o Netbeans

Application Server:

o JBoss Application Server (now WildFly)

Architectural Concepts and Tools:

o Messaging system (e.g. IBM MQ)

o Responsive Web Design

o Rules Engines

o Service Oriented Architecture

o Weblogic

o Websphere

Programming Language:

o Java

Experience in one or more of the following:

o Asynchronous JavaScript and XML (AJAX)

o JavaServer Faces (JSF)

o Web Services

o Web Services for Remote Portlets (WSRP)

Development Tools:

o Web Integrated Development Environment (IDE)

Web Service Architectural Styles:

o Representational State Transfer (REST)

o Simple Object Access Protocol (SOAP)

Environment/Systems

Experience in one or more of the following:

o Linux

o MS SQL

o Oracle

o Unix

o Windows

Operating Systems

Experience in one or more of the following:

O Linux

O Oracle Solaris

O Unix (Solaris)

Database technologies:

O DB2

O MSSQL

O Oracle

Frameworks:

O Service Component Architecture (SCA)

Programming Languages and Other Languages:

o Extensible Markup Language (XML)

o HTML

o Java

o JavaScript

Others:

o At least 5 years of experience in systems analysis, design (include database design), development, implementation, and quality assurance

o Good communication, strong analytical, problem-solving skills

o Able to work independently in gathering requirements from users, translating them into application specifications

o Project Management skills

o Vendor Management skills

Additional skills set:

o Working experience in Object Oriented Analysis and Design.

o Proficiency in Java Enterprise Edition or Spring or equivalent.

o Proficiency in Development of Web-based applications using UI framework such as

o Angular/AngularJS, JQuery, Struts or equivalent.

o Proficiency in Development of application using Persistence framework such as Hibernate, JPA or equivalent.

o Proficiency in Relational Databases like DB2, SQL Server, Oracle.

o Proficiency in Using tools for testing.

o Working experience in using Webserver like Apache Webserver, Microsoft IIS or equivalent.

o Working experience in COBOL, CICS, DB2 (preferred)