We are looking for a Lead GTCC (Gas Turbine Combined Cycle) Commissioning Engineer, who can apply expert engineering knowledge and seasoned project / site experience to support the successful commissioning of any project in MODEC business areas including hull/topsides/mooring facilities right from preparation phase to execution phase.

Scope Of Work

• Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.
• To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.
• Develop Onshore and Offshore Commissioning Procedures for Topsides Mechanical Systems and supporting Mechanical Systems / Thermodynamic requirements for Combined Cycle systems.
• To support in developing project deliverables as per project & client requirement.
• Prepare & Review of company development work methodology / procedures.
• Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.
• Attend FAT and SAT depending on project requirements.
• Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.
• Carry forward the MODEC HSEQ policies / requirements to the team and meet overall HSEQ objectives in all projects / feedback results to corporate HSEQ team.
• Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.
• Perform duties as per directives of reporting authority.
• Leads site execution team on performing pre-commissioning and commissioning activities planned for the Topsides Mechanical systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to Operations safe system of work regarding all the Topsides System Commissioning SoW.
• Commissioning of Topsides Mechanical systems, Functional tests and system certification with Class Society.
• Responsible for verification and close out of all Safety critical elements associated with the package.
• Ensure all regulatory and statutory testing and requirements are performed and records are maintained.
• Perform Risk assessment for the commissioning scope, conduct toolbox meetings
• Ensure to supervise Technicians to carry out commissioning activities in a safe and controlled manner in accordance with site procedures and PTW requirements
• Manage discipline and cohesive environment in the office. Monitor / Guide all commissioning engineers/assistants/administrators.
• Day to day Planning of work, Manage schedule & targets of the project as required.
• Identify and manage resource requirement to meet schedule and targets.
• Prepare and maintain commissioning records of site observations, testing processes and checklists
• Coordination of functional testing of commissioned systems and engaging the Operations Team when and where needed
• Troubleshoot the logic function, suggest modification plan of logic diagram, liaise with I&C engineer as well as ICSS vendor, and implement.
• Execute pre-commissioning and commissioning as per procedure and sign-off respective documents with Client representative for system closure.
• Prepare timely and accurate technical report for management and a reference for future.
• Travel to offshore project sites and perform offshore commissioning / assist facility startup.
• Lead the team to perform Start-up at offshore following the start-up procedure, stabilization and performance testing.
• Ability to set priorities and meet deadlines
• Ability to problem solve with or without the guidance of senior leadership
• To conduct analytical review of complex progress reports in order to systematically identify issues and from there, address these issues in a timely manner.
• Disciplined in time management and independent in handling/prioritizing complex work requirements within the project’s stringent timelines.

Qualifications

• Bachelor Degree in Engineering (Mechanical) with 14 to 17 years work experience (or) Master Degree in Engineering (Mechanical) with 12 to 15 years work experience with minimum of 10 years work experience in onshore/offshore Oil & Gas area or FPSO line(s). Also Diploma in Engineering with 17 to 20 years work experience (making the equivalent to degree) can also be considered.
• Specialist knowledge of at least Three MODEC or related project line.
• Ability to define concepts of completion process.
• Experience in design of FPSO’s including FEED, detailed design, construction, commissioning & start-up phase.
• Experience of Topsides Mechanical Production Systems and EPCIC to handover to operations.
• Experience in Complex Gas Compression, Injection, Export Systems and Thermodynamic requirements for Heat Recovery and Steam systems, especially Combined Cycle.
• Experience in steam system Commissioning and S/U, including initial cleanup (steam blows).
• Experience with OTSG (Once Through Steam Generator) a plus.
• Experience with condensing steam turbines and specific utilities such as boiler feedwater pumps and vacuum pumps.
• Have proven project experience and skills within the field of Testing, Pre-commissioning, Commissioning execution and startup at offshore.
• Experience in offshore plant startup and stabilization and able to provide Operations with technical support throughout start-up, stabilization, and performance testing.
• Experience on commissioning and startup of Gas Compression and Gas Treatment plants.
• Experience on commissioning and startup of Water Treatment and Water Injection plants.
• Work experience within strict regulatory environments and aligning commissioning independencies with engineering compliance and contractual requirements.
• High safety awareness is mandatory. A good knowledge of managing simultaneous operations (SIMOPS) is essential.
• Significant knowledge of multiple technologies, projects and applications. Working knowledge of competing and alternative technologies.
• Familiar in use of Software, Database systems related to System Completion, Project Management (MS Project / P6) and General computer literacy (MS office).

Are you a tech leader passionate about building high-performing teams and ensuring exceptional application uptime?

Morgan Mckinley is seeking a motivated and experienced Application Support Lead to join our dynamic team!

In this role, you will:

• Lead and mentor a team of application support specialists, fostering their growth and development.
• Tackle complex technical issues related to .NET, Java, and SQL/Database applications.
• Proactively improve application performance and stability through innovative solutions.
• Collaborate closely with development teams to identify and fix bugs.
• Manage vendor relationships for optimal service and timely resolution of support requests.
• Build strong relationships with internal stakeholders across business, IT, and management.
• Champion continuous improvement by developing and implementing process enhancements.
• Stay ahead of the curve by learning the latest technologies and trends in application support.

Are you a perfect fit? You'll have:

• A Bachelor's degree in CS, IT, or a related field (Master's preferred).
• 5+ years of experience in application support, 2+ in a leadership role.
• Proven track record of troubleshooting and resolving complex technical issues.
• Excellent communication, interpersonal, and presentation skills.
• Strong analytical and problem-solving abilities.
• A knack for thriving in fast-paced, team-oriented environments.
• Network and infrastructure management experience a plus.
• Vendor management and stakeholder relationship building skills.
• ITIL or similar methodology experience preferred.

Interested candidates may apply through the application system or send it to [email protected]. Shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to Morgan Mckinley Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.morganmckinley.com/sg/privacy-policy. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Morgan McKinley Pte Ltd

Koh Boon Sien

EA Licence No: 11C5502

EA Registration No. R1110345

Job Description

We are looking for someone with a leader's soul, who likes to work in a team, and who knows how to transmit the needs to the client so that the team can clearly understand the tasks to be developed. It is necessary to have a broad knowledge of the tool and be able to offer the client the best solution to get the most out of Salesforce Marketing Cloud in terms and at a functional level.

Key responsibilities:

• Guide the team to develop campaign launches through Marketing Cloud.
• Cohesively explain requirements and tasks to be performed by the team.
• Review and ensure that the quality of the work delivered by the team is up to standards.
• Conduct trainings and create documentation of the processes and campaigns.
• Negotiate and monitor the project/s with the client.
• Collaborate with the agency’s management team in matters related to the client, business, product and people.

Required Competencies/Skills/ Experience:

• Experience working with Salesforce Marketing Cloud for at least 4 years
• Basic knowledge of HTML and SQL
• Knowledge and ability to run Salesforce tools (e.g. journey builder, content bulider, automation studio, CDP, Personalization Studio)
• Knowledge in other types of channels (SMS, APP via Mobile Studio)
• Proficiency in explaining the different modules of Salesforce Marketing Cloud and in understanding SFMC best practices
• Knowledge and skills to carry out a tool implementation
• Knowledge of other clouds within Salesforce (Service, Sales, Loyalty, Commerce etc.)
• Knowledge of Marketing Automation strategy
• Expertise in Martech Solutions, passionate about marketing automation, the user journey, and lead nurturing
• Ability to understand business needs and make sound recommendations to clients.
• Strong consultancy and presentation skills
• Excellent verbal and written communication skills
• Proactive and has good time management and leadership skills
• Ability to work in a fast-paced, demanding environment, with multiple and changing priorities while maintaining strong attention to detail

AT MRM, RELATIONSHIP IS OUR MIDDLE NAME.

MRM is a modern relationship marketing agency that delivers transformative creative solutions at the intersection of business, culture, and technology. MRM operates in a borderless, integrated way, to allow for greater collaboration and velocity—all to the service of helping businesses grow meaningful relationships with people. MRM is part of McCann Worldgroup and the Interpublic Group of companies (NYSE: IPG), and spans 35 offices across North America, Latin America, Europe, the Middle East, and Asia Pacific. For more information, please visit www.mrm.com.

NO THIRD PARTY RESUMES ACCEPTED.

We love our diverse workplace! MRM is an equal opportunity employer and does not discriminate on the basis of race, color, gender, religion, age, sexual orientation, national or ethnic origin, disability, marital status, veteran status or any other occupationally irrelevant criteria.

Responsibilities:

• Conducting product research and sourcing new suppliers and vendors.
• Sourcing materials, goods, products, and services and negotiating the best or most cost-effective contracts and deals.
• Performing inventory inspections and reordering supplies and stock as necessary.
• Conducting market research to keep abreast of emerging trends and business opportunities.
• Inspecting stock and reporting any faulty items or inconsistencies immediately.
• Updating and maintaining records of all orders, payments, and received stock.
• Coordinating with the delivery team and following up on delays or orders that have been rescheduled.
• Attending product launches and networking with industry professionals.
• Establishing professional relationships with clients as well as vendors and suppliers.
• Ensuring all stock is packaged appropriately and delivered to the correct location in a timely manner.

QA Lead Responsibility

• Provide functional workflows, test data, and support to black box, automation, VA and PT.
• Experience with test automation tools such as Tricentis Tosca.
• Expertise in writing test scenarios and test cases.
• Effectively collaborate, communicate and build rapport with team members, project stakeholders, business partners, and vendors
• Support UAT, including obtaining official sign-off approval on releases ready for UAT and production
• Champion agility and improvement in the test process
• Facilitate complex group meetings and conduct information-gathering sessions with groups across IT offshore teams
• Own QA automation frameworks.
• Test new developments on all platforms.
• Work closely with the CX & UX team to make sure the code meets defined product requirements
• Leading a team of testers and be responsible for the quality of their work
• Creating test plans and strategies
• Identifying and documenting defects
• Tracking Quality Assurance metrics (e.g. defect density, open defect count)
• Participating in daily stand-up meetings, sprint planning, and sprint retrospectives
• Coordinating with other teams to ensure timely delivery of quality software products.
• Lead and mentor a team of junior QA engineers.

QA Lead Requirements & Skills

• 8+ years of experience in software testing
• Strong knowledge of software QA methodologies and tools
• Strong communication and interpersonal skills
• Ability to lead and motivate a team of testers
• Ability to work in a fast-paced environment and meet deadlines
• Experience with test management tools (e.g. JIRA, Quality Center)

Responsibilities:

Purchasing -

· Handle all purchasing activities

· Responsible for Order Placement Timing, Supply & Demand Alignment, Material replenishment and Supplier Performance

· Continuously monitoring, evaluating and improving supplier performance

· Source the most cost-effective material for the company

· Stock level projection

· Purchasing budget control.

· Monitor delivery times to ensure timely delivery

· Managing the procurement suppliers’ relationships for the Company

· Regular negotiations with suppliers on purchasing prices

· Resolve disputes and claims with vendors and suppliers.

· Prepare Monthly or Weekly purchase & inventory report

· Analysis of sales forecast accuracy, stock movement and aging stock

· Liaise with finance department with regards to cycle count and inventory reconciliation

· Work closely with the sales team to support with daily B2B customers invoicing.

· Ensure Monthly closing report is completed within deadline (Inventory report for all outlet & warehouse)

· Handle unforeseen situation related to inventory and stock matters in all outlets, work closely and provide support to operation outlet team in all restaurant activities

· Organize Monthly stock take activities on selected outlet

· Airport pass application for delivery suppliers

· Other ad-hoc duties when required

Logistic (Import/Export and Delivery Operations) –

· Planning Shipment from overseas suppliers

· Ensure timely & accurate arrival of shipment through close liaison with 3PL, freight forwarder supplier & distribution.

· Prepare and check all shipping documents such as B/L, packing list, certificate of origin etc. to ensure that they are complete and comply with AVA import and export rules and regulations

· Coordinate AVA inspection when shipment arrive at warehouse

· Liaise with Freight Forwarder in arranging overseas shipment, transportation, etc. to ensure timely clearance and fulfilment to shop.

· Other ad-hoc duties when required

Requirements:

· Diploma or Degree in related field

· At least 1 years of relevant work experience

· Ability to multi-task and prioritise work schedules

· Well-versed in F&B and non-food products knowledge

· Entry level candidate are welcomed

Email your resume to [email protected] to apply!

Job Responsibilities

1. Sourcing of products requested by all user departments and obtaining competitive quotes.

2. Preparing a comparative analysis of supplier’s quotes in a comparison summary.

3. Responsible for purchasing duties such as generating Purchase Orders, creation of article codes and updating of quotations for food and non-food items.

4. Generate and process purchase order timely.

5. Follow up closely on the status of product delivery to ensure smooth operation support.

6. Follow up with Suppliers if there is any discrepancy between the Purchase Order and physical delivery on pricing, quantity or quality.

7. Work closely with respective departments on their purchasing needs.

8. Maintain purchasing records filing system and ensure that records are up to date.

9. Arrange for product demo, food-tasting and yield test.

10. Update the Purchasing Manager and relevant departments with information on new products/prices.

11. Assist in physical inventory for all operating equipment in circulation and in-store when required.

12. Perform any assignment given by the Purchasing Manager from time to time.

Education & Work Experience

1. Possesses minimum GCE ‘A’ or ‘O’ Level.

2. Minimum 3 years working experience in Purchasing.

3. Good negotiation and interpersonal skills.

4. Well-versed in F&B and non-food products knowledge.

5. Good knowledge of vendor sourcing and a good understanding of supply chain procedures.

6. Self-motivated and able to work with minimal supervision in a dynamic environment.

Software Test Lead (Automation)

Our Esteemed and Reputable Client is looking for an Software Test Lead (Automation).

Requirements:

• Solid experience in handling Software Quality Assurance methodologies
• Strong experience in handling Quality Assurance and Software Governance.
• Good track record in handling Software Automation.
• Extensive experience with test automation tools and frameworks.
• Lead the development of comprehensive test strategies and plans in collaboration with stakeholders.
• Good in Creating and maintain test documentation,including test plans, test cases, and test reports.
• Collaborate closely with software developers, product managers, and other stakeholders to resolve issues and improve product quality.
• Sound knowledge in handling quality improvement practices and processes.
• Experience in handling IT Quality Assurance, Process Improvement, Software Testing and Methodology.
• Strong knowledge of software testing methodologies, tools, and best practices.
• Minimum 3- 5 years of Software Test experience.
• Possess ISTQB Certification.
• Maintain and write Quality Management System procedures and processes.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Location: Commonwealth (Near MRT)

5 Days Work Week/ Mon to Fri - 8:30am to 5:45pm

Salary: Up to $2,700

Responsibilities

• Learn about products through training sessions.
• Efficiently execute daily procurement tasks.
• Support Purchasing Manager in day-to-day operations.
• Issue Purchase Orders and ensure timely delivery.
• Handle import shipping documents and Letters of Credit.
• Coordinate with warehouses for shipments.
• Process Goods Receipt and submit documentation for payments.
• Update information on new certificates.
• Assist in local sourcing for new or replenished products.
• Manage claims for defectives, shortages, and missing parts.
• Update product information and supplier profiles.
• Perform other tasks assigned by the supervisor.

Requirements

• Diploma holder
• Entry-level candidates are encouraged to apply; however, individuals with work experience will be given preference.
• Proficient in MS Office

Interested applicants, please email your resume to [email protected]

Tan Li Lian

EA 01C3135

Reg R1100465

Key Responsibilities

- Handle basic office tasks, attend to incoming phone calls, collect / manage mails, data entry and other ad-hoc duties as assigned.

- Responsible to source construction materials / equipment / tools, product / price evaluation, negotiation with suppliers, issuance of Purchase Order, monitoring / updating of delivery timeline and ensure that all invoices are matching PO and DO accordingly.

Job Requirement

Min GCE ‘O’ level

Minimum 1 to 2 years’ experience

Proficient in Microsoft Office

Proactive, responsible, resourceful, organized approach to multitasking, able to work independently with minimum supervision

Job Description

• Industry/ Organization Type: Manufacturing/Industrial Machinery
• Position Title: Purchasing Assistant (Part-Time)
• Working Location: Tuas
• Working Hours: 3 days (8 am – 5:30 pm/6 pm)
• Salary Package: $1,400
• Duration: Part-Time

Key Responsibilities

• Assist the Purchasing Manager with daily procurement activities and sourcing equipment, parts, and supplies.
• Process purchasing orders, and monitor order status to ensure timely delivery; communicate any delays or issues to the appropriate parties.
• Compare product deliveries with issued purchase orders and contact vendors when there are discrepancies.
• Work closely with the receiving department to ensure proper goods are received and resolve any discrepancies in a timely manner.
• Assist with the maintenance of accurate procurement records, including details of orders, invoices, and documentation for inventory audits.

APPLY NOW!!!

• GCE ‘O’ levels and above.
• Minimum 1 year of procurement experience preferred.
• Proficient in Microsoft Word and Excel.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66069 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Lead Process Engineer (Injection Moulding)
• Working Location: North - Yishun (Nearest MRT: Canberra)
• Working Hours: 5 days (Mon – Fri, 8.30 am – 5.30 pm)
• Salary Package: Up to SGD 8000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Establish process conditions through scientific moulding for existing/new products
• Troubleshoot moulding processes and material or equipment issues
• Evaluate tooling for areas of concern, areas of improvement for quality and efficiency, and recommend improvements to optimize moulding, set up, and overall manufacturing
• Collect and analyse data on individual processes to identify and improve process capability
• Document and maintain Mold process sheets for accuracy
• Support process technicians through training in scientific moulding practices
• Leadership role in continuous improvement and cost reduction activities
• Use Lean Manufacturing, Six Sigma, and other techniques to analyze process data to determine capabilities as well as improvements
• Manage projects, and ensure all tooling is executed smoothly and efficiently against an agreed plan
• Perform evaluation and development activities to provide solutions for technical problems to sustain and improve production yield, quality, process cycle time and cost reduction
• Lead team in problem-solving – identification of problems and analysis of the root cause
• Conduct proof of concept (POC) evaluation and design of experiments (DOE) during development, establish baseline process and metrics
• Lead design of experiments (DOE) to establish a stable and robust process that can be handed off to production personnel
• Develop detailed training manuals and independently train production staff on machine and cell operations
• Exhibit clear technical information and supporting documentation to ensure accurate handover to cross-functional teams
• Audit manufacturing process - assessing process inefficiencies, safety improvements, and potential optimizations through the implementation of automation
• Develop methodology and process to monitor die temperatures and automated evaluation (including acceptance criteria) for start-up procedure vs. steady-state production
• Solve technical and emergent issues in the manufacturing cell (part quality, machine reliability, process instability, etc.)
• Create and manage detailed step-by-step troubleshooting work instructions and manage on-schedule completion of training activities for Technicians
• Provide technical leadership and mentorship to Production Leaders, Production Technicians, Machine Operators, Material Handlers
• Be vocal as a participant, influencer, and presence for Process related Development

APPLY NOW!!!

• Diploma in Engineering or Sciences
• Min. 5 years’ experience in plastic injection moulding environment
• Experience in process capability studies and tooling technical incline is a plus

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66052 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Location: Novena/Clarke Quay

Responsibilities:

• Lead a team of Customer Experience Officers to achieve KPI
• Respond to survey enquiries via inbound calls and emails
• Conduct survey interviews via outbound calls
• Reach out to the respondents to assist them to complete the survey
• Organize workflow and ensure that officers understand their duties and delegated tasks
• Set goals for KPI and deadlines in accordance to the project timeline to ensure project’s success
• Provide fair, constructive, and timely feedback towards performance expectations and goals
• Manage escalated cases and maintain public relations including any complaints
• Provide assistance, guidance, and coaching support to officers to meet KPI
• Assess work performance of officers and identify areas that need improvement
• Monitor and provide project status report to manager
• Ensure officers understand the survey objectives
• Ensure officers compile, record, input survey returns and data accurately into the system
• Ensure officers conduct verification to ensure completeness and accuracy of data collected
• Ensure that the given KPI are being met based on the project timeline

Requirements:

• Only Singaporean
• At least 2 years of working experience as Supervisor in Call Center environment.

Should you be interested in this position, please contact Terence at +65 9645 4048 your resume directly for fast respond.

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. R23116141 Le Cong Thang

Essential Duties & Responsibilities:

• Responsible for overseeing and leading the mechanical design of UPW and wastewater treatment systems, including the selection and sizing of equipment such as process vessels, pumps, compressors, heat exchangers, dewatering devices, and other mechanical components.
• Ensure seamless integration of these components into the overall treatment system.
• Prepare technical specifications for mechanical equipment and work with vendors to procure the required components.
• Evaluate equipment proposals and make recommendations based on technical and budgetary considerations.
• Collaborate with project managers and other engineering disciplines to plan and execute UPW and wastewater treatment projects.
• Participate in project meetings, design reviews, and progress assessments to ensureproject objectives are met.
• Perform engineering calculations, simulations, and modeling to assess theperformance and reliability of mechanical systems.
• Address technical challenges and propose solutions to optimize system performance.
• Ensure that all mechanical designs and installations comply with applicable codes,standards, and industry best practices.
• Conduct quality control reviews to verify design integrity and safety.
• Collaborate with the project team to prepare cost estimates for mechanical components and equipment.
• Identify cost-saving opportunities where applicable.

Skills & Experiences required:

• Bachelor’s degree in Mechanical Engineering or a related Engineering field.
• At least 15 years of exposure and experience in mechanical engineering with expertise in water and/or wastewater treatment systems will be considered for the Lead or Manager role.
• Proficiency in mechanical design software and engineering analysis tools.
• Strong understanding of various mechanical components and equipment used inwater and/or wastewater treatment systems.
• Has the ability to handle multiple tasks and priorities.
• Excellent communication and collaboration skills to work effectively within cross-functional teams.

Job Description

• Industry/ Organization Type: Distribution of equipment and accessories
• Position Title: Admin cum Purchasing Assistant
• Working Location: Tuas (Transportation Provided from Boon Lay MRT)
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $2,400 + AWS + VB
• Duration: Permanent

Key Responsibilities

• Liaise and negotiate with suppliers.
• Issue Purchase Orders.
• Monitor the timeliness of deliveries.
• Liaise with freight forwarders and courier companies on the deliveries of incoming shipment.
• Liaise with internal departments on product type, price, and quantity of products to be purchased.
• Ensure that all invoices are certified accordingly.
• Data entry and proper filing of documents.
• Other ad-hoc administrative duties as assigned.

APPLY NOW!!!

• Minimum GCE ‘N’/‘O’ levels with at least 2 years of administration experience
• Proficient in Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65896 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing/ Electronics
• Position Title: Logistics and Purchasing Coordinator
• Working Location: Commonwealth Ln (near the MRT)
• Working Hours: 5 days (Mon-Fri, 8:30 AM - 6 PM)
• Salary Package: Basic Salary + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Responsible for coordinating shipping, receiving deliveries, conducting stock checks, documenting records, and storing of inventory.
• Ensure outgoing and incoming shipments are done on time, within budget, and to the exact location.
• Preparing shipping documents (e.g., airway bills, bills of lading, purchase orders, delivery orders, certificates of beneficiary, etc.).
• Preparing export LC documents for negotiation and ensuring compliance with the terms and conditions stipulated in the LC.
• Familiar with shipping incoterms.
• Liaise with shipping companies, transport contractors, and inter-department to ensure timely clearance and smooth flow of shipments.
• Tracking orders to ensure timely deliveries.
• Responsible for procurement process and sourcing in a timely manner.
• Effectively acquire the most relevant and cost-effective deals.
• Managing and dispatching spare parts requests.
• Sourcing and managing suppliers, vendors, and freight forwarders, and maintaining good business relationships.

APPLY NOW!!!

• GCE 'A' level or Diploma in Logistics, Procurement or equivalent.
• At least 1-2 years of relevant experience is preferred.
• Good communication skills and strong negotiation skills.
• Proficiency in MS Word and MS Excel.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65060 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• As a Team Lead you will lead the end-to-end development of digital platform
• You have a strong focus on feature grooming, system architecture design, and sprint planning.
• You have strong software engineering skills to create and deliver robust, reliable, and scalable platforms.
• You possess the versatility to discuss solutions, estimate, and break down into tasks for the software developers.
• You easily adapt to working closely with a team of product managers, designers, frontend/backend/data engineers, and devops, influencing the right technical decision making.
• You will be reporting to the Engineering Manager.

Duties and Responsibilities

• Lead a product development team to build and evolve the platform technology.
• In charge of developing and maintaining platform services, such as communication, media, and other common services
• Support the entire application lifecycle (concept, design, test, release, and support)
• Gather specific requirements and suggest solutions.
• Write unit and API tests to identify malfunctions.
• Troubleshoot and debug to optimize performance.
• Ensure new and legacy applications meet quality standards.
• Research and suggest new mobile products, applications, and protocols.
• Stay up to date with new technology trends Mandatory requirements.
• Experience working with software engineers, who specialize in ReactJS or Java/Spring Boot.
• Experience with REST and various HTTP Verbs
• Experience in developing or maintain Cloud Application through at least one provider among AWS, GCP, or Azure
• Experience of end-to-end software design and performant architecture (serverless, containers)
• Automation with CI/CD tools (Github Actions, Bitbucket Pipelines)
• Experience of building scalable and highly available products using microservices
• Experience in agile development methodologies
• Experience leading product strategy
• Excellent communication, presentation, and analytical skill

Essential Duties & Responsibilities:

- As part of an integrated system, the candidate is responsible for the design and technical support of all hardware, software, instrumentation and control elements

- Identify, create and support project documentation including, but not limited to:

• HMI, PLC programming
• power distribution
• control/signal wiring
• wireless technology
• cabinet/panel design
• BOM and layout drawings

- Develop instrumentation specifications as related to process requirements and control schemes.

- Prepare, check, and issue instrument schedule and list, including document index, instrument index, I/O list, cable schedules, interconnection wiring drawings, termination drawings, junction box schedule, instrument hookup drawings, and material take off.

- Support engineering, project management and deployment groups to identify and resolve technical issues.

- Work with vendors and purchasing to select and establish equipment component specifications, material take-offs, requisitions and vendor orders.

- Coordinating cost control, project schedule, and manufacturing efforts.

- Check and issue the following:

• block diagrams,
• control/rack room layout,
• cable route, instrument location plan,
• DCS, SIS, BMS systems loop drawings,
• instrument hook-up details, and
• instrument sizing and calculation.

- Prepare and issue instrument data sheets for control valves, on-off valves,PCVs, MOVs, PSVs, and other field instruments.

- Support and assist designers in drawing preparation.

- Provide technical direction as required.

Skills & Experiences required:

• Bachelor’s Degree in Engineering or related field with more than 15 years of experience in System Controls, Instrumentation and Wiring for the Lead or Manager role.
• Ability to work independently and in an interdisciplinary team environment to perform all duties in a professional and timely manner.
• Able to work through problems from a technical and practical prospective, while maintaining cost controls.
• Proven experience and exposure in Wastewater, Chemical Processing and/or Oil and Gas systems experience is preferred.
• Experience designing PLC & Control panels, PLC and HMI programming is required.
• Must possess in-depth knowledge of Automation programmable controllerhardware, automation software, and AC Drives
• Proficient skill use of MS Office and AutoCAD
• Knowledge of PLC programming experience is a plus.
• Prior experience with SCADA system
• Has the ability to handle multiple tasks and priorities.
• Excellent communication and collaboration skills to work effectively withincross-functional teams.

• Market Leader
• Managerial Responsibilities

About Our Client

Our client is a market leader in the insurance field, with over 30 years of expertise. Leveraging on its strong and established relationships with industry partners, they have built their reputation on providing a wide array of insurance solutions. They are now looking for someone to head up their Corporate Solutions team.

Job Description

• Manage & grow the overall portfolio to meet the department's targets - New & Renewal Business
• Oversees and manages the daily operations and business activities of the Corporate Solutions Department
• Ensure Teamwork and align roles & responsibilities for maximum effectiveness
• New Business development strategies
• Ensure excellent retention rate on existing portfolio
• Renewal invitation to be executed diligently at least 60 days before expiry
• Develop Cross Sell strategies with other Business Units & Existing Clients
• Ensure prompt premium collection for new business
• Gather market studies and/or feedbacks and take necessary action
• Managing escalations from the team and work closely with the General Manager for the overall succession planning of all team members
• Carry out any other duties as assigned

The Successful Applicant

• About 6 years of B2B Insurance experience including team management
• Knowledge and experience in Property & Casualty is a plus
• Proficient in Microsoft Office and computer skills
• Good analytical, communication and time management skills
• Understanding of diverse business processes and strategy development
• Able to manage high transaction volume and in a fast-paced environment
• BCP, PGI, CGI & HI Certifications are required

What's on Offer

This is a chance to join a well-established company that will offer managerial responsibilities and an attractive basic salary to the chosen candidate.

Benefits:

• Basic salary: $7500 - $8000
• AWS, Peformance bonus, medical/dental
• East area, MNC

Job scope:

• Develop strategic plans for the purchasing function
• Prepare cost estimates, tender, contracts and price finalizing for project tender submission
• Render support to business leaders for all project procurement matters
• Source for required material and suppliers, either directly or through consultant
• Contributes to deliver bottom line/top line results, managing own spend/projects according to long term planning and upfront targets defined
• Conducts periodic risk assessment, designing and managing adequate countermeasures for selected spend
• To review with vendors on quality issues and ensure corrective and preventive actions are taken by vendors
• Review & plan purchasing order through :
  • Internal : collect related customer inquiries from Sales on specification and lead time
  • External : sourcing suppliers, networking, market information and negotiation
• Procurement of material and negotiation with suppliers, ensuring price is always competitive and landed cost evaluation is performed
• Evaluate prices and suppliers and make selection recommendation to project and stakeholders
• Manage and plan Inbond Shipping : manage delivery suppliers (UPS), negotiate discount rate
• Manage Capital Equipment with engineering knowledge
• BOM and material planning to ensure smooth delivery at minimum inventory level
• Yearly cost saving initiatives

Job Requirement:

• Minimum 5 years of experience in EMS/Manufacturing environment
• Good oral and written communication skills
• Exercises sound judgment based on factual data and analysis
• Strong project management, change management and strong leadership skills
• Strong analytical skills including mathematics, statistics and problem solving
• Capability to evaluate and mitigate risks in the planning process
• Proven negotiation skills in dealing with customers and internal challenges

Interested applicants, please send your resume to [email protected]

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Contracts Manager to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Collaborating on project contracting strategies and establishing contract schedules and overall plans.
• Developing detailed contract plans for various disciplines involved in pharmaceutical plant construction.
• Conducting comprehensive surveys to assess contract capabilities for the project's requirements.
• Compiling a bidders list and securing necessary approvals.
• Maintaining organized contract files in line with project protocols.
• Crafting bid packages based on engineering data and project needs.
• Facilitating bid explanation meetings to ensure bidders understand scope of work.
• Fairly evaluating bid documents, including technical assessments.
• Generating regular contract status reports.
• Coordinating final work acceptance and safeguarding pricing information.
• Providing recommendations and coordinating contract awards.
• Drafting and executing contract documents in support of the legal team.
• Conducting site meetings to monitor progress and ensure contract compliance.
• Managing contracts, documenting changes promptly, and processing invoices.

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

We are looking for a Lead UI/UX Designer to join a Software Solutioning Company working on FinTech applications.

• Lead a team of designers to deliver FinTech related applications.
• Salary package up to $8,500 + AWS + VB (~2 months bonus).
• Dynamic working environment.

Responsibilities:

• Lead the design team’s design roadmap through standardization and process implementation
• Design and create concepts, mockups, prototypes and user journey that lead to intuitive user experiences for a wide range of platforms.
• Gather and evaluate user requirements in collaboration with project managers, product managers, engineers and various stakeholders.
• Strategically create new features and functionality based on user stories and behaviour.
• Ability to clearly communicate research and design ideas to internal teams and key stakeholders.

Requirements:

• Bachelor degree in design or a related subject.
• Min 5 years of working experience in wireframing, user flows, interaction design.
• Prior experience in leading a team.
• Strong understanding of current UI design practices to create an efficient & seamless user experience.
• Mandarin may be required for business communication needs.

Interested candidates may apply via email to [email protected] (indicating Job ID J43674 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

The job function is a specialist lead role in managing a team responsible in Equities Post Trade Life Cycle Processing for Local & Foreign Markets. The candidate is responsible to ensure daily transactions are processed in accordance with service level. The candidate must be highly detail-oriented when processing numerous transactions with strong quality mindset. The candidate must be a team player as he/she is expected to collaborate with various internal and external stakeholders.

Roles and responsibilities

• Manage the Team responsible in Equities Post Trade Life Cycle in day-to-day liaison with Internal / External Clients as well as 3rd Parties (e.g. Custodians, Counterparties etc) to deliver quality services within established controls & service levels
• Process Trading Transactions in various instruments including Securities, Fixed Income in Local and Foreign Exchanges adhering to documented procedures, control guidelines and compliance framework
• Maintain strict oversight of the Team’s deliverables and processes to ensure no operational risk and control lapses
• Ensure any discrepancies / exceptions are timely addressed and solution escalated to Head of Department for prompt and effective resolution
• Responsible to provide accurate / timely statistics for Management and Regulatory Reportings
• Identify opportunities, develop strategies and design execution plans to continuously streamline / automate processes / drive innovations to achieve better customer & employee experiences as well as improve operational efficiency with yoy operational cost savings
• Champion various Initiatives working with Internal / External Stakeholders in documenting Functional To-BEs, User Test Cases, etc to the Actual Implementation of the Systems / Services
• Mentor / Role Model to the Team

Qualifications - External

Requirements

• Bachelor’s Degree with Min 8-10 Years of relevant experience of Singapore and Foreign Markets, Depository Clearing and Settlements (ideally with Securities / Brokerage Backoffice experience)
• Eye for details and meticulous in managing tasks assigned within tight timeline and service levels
• Strong risk controls / compliance mindset
• Strong analytical and problem solving skills
• Excellent verbal/written communication, conflict resolution and interpersonal skills
• Positive attitude towards learning new roles and adapting to changes / varying priorities
• Self-motivated and Pro-active with the ability to work independently as well as part of a team (across multiple functions)

As a Cloud Engineering Lead in the software engineering team in Singapore for our financial services customer, you are an integral part of an agile team that works to enhance, build, and deliver trusted market-leading technology products in a secure, stable, and scalable way. Drive significant business impact through your capabilities and contributions, and apply deep technical expertise and problem-solving methodologies to tackle a diverse array of challenges that span multiple technologies and applications. As part of this dynamic role you will work closely with business units and other Software Development teams to deliver leading edge technology to enable digital capabilities.

Your focus

• Lead Architecture and Design: Architect, design, and oversee the implementation of various components of the key platforms, ensuring integration with technologies developed by software engineering teams, APIs for Front-End Apps, leveraging Cloud, Cloud Native, and AI/ML technologies.

• Metrics and Optimization: Define key performance metrics for the platform, establish processes for tracking these metrics, and continuously optimize platform performance.

• Engineering Processes: Implement and refine engineering processes, implement engineering roadmap items, utilizing the most effective tools and methodologies to enhance development efficiency and data management.

• Cross-Functional Collaboration: Work closely with Product Owners and Engineering teams to align on platform capabilities, and solutions with both business and technical requirements.

• Platform Development Lifecycle Management: Oversee the entire lifecycle of platform development, from conception through deployment and maintenance.

• Technical Leadership and Oversight: Provide technical guidance to engineers, ensuring high-quality technical delivery and effective problem-solving during implementation phases.

• Architectural and Non-Functional Considerations: Ensure that the platform/applications architecture adequately addresses key non-functional requirements such as high availability, scalability, maintainability, and extensibility.

• Actively engage in coding, with a focus on full stack development and system integrations.

• Design and standardize APIs for efficient internal/external partner integration and scalability

Your competencies

• Strong expertise in technical architecture, system design, software development, and security considerations of cloud based applications.

• 10+ years of relevant experience in software engineering.

• Proficiency in backend technologies and frameworks (e.g., Java, Spring boot).

• Cross platform Front-end technology experience (e.g. React, Flutter) is a plus.

• Expertise in RESTful/GraphQL API development and integration.

• Familiarity with SQL/NoSQL databases, data structures, and algorithms.

• Good understanding of cloud services and infrastructure (Azure, Google Cloud).

• Experience with Cloud CI / CD automations (i.e. Terraform, GitHub) would be an advantage.

• Experience with container (i.e. GKE, K8S), auto-scaling, HA would be an advantage.

• Ability to code, test, and maintain a future-proof platform, considering risk management, security aspects and scalability.

Education

• Degree in Computer science, Computer Engineering or equivalent experience

Job Summary

We are seeking an experienced and strategic-minded Paid Ads (Lead) to take charge of our paid advertising initiatives. As a Lead Paid Ads Specialist, you will be responsible for overseeing the planning, execution, and optimization of paid advertising campaigns, driving the team towards achieving ambitious business goals. This role requires a combination of hands-on expertise, leadership skills, and the ability to develop and implement advanced paid media strategies.

Responsibilities and duties:

Leadership and Strategy

• Provide leadership and guidance to the paid advertising team, ensuring alignment with overall marketing and business objectives.
• Develop and execute advanced paid media strategies to maximize ROI and achieve long-term business growth.

Campaign Planning and Execution

• Lead the development of comprehensive paid advertising strategies, including audience targeting, remarketing, budget allocation, channel selection, and cross-channel optimisation.
• Oversee the creation and optimization of ad creatives and landing pages, ensuring they align with brand messaging and resonate with the target audience.

Team Collaboration

• Collaborate with cross-functional teams, including creative, content, and analytics, to ensure cohesive and integrated marketing campaigns.
• Foster a collaborative and innovative team culture, encouraging continuous learning and development.

Performance Analysis and Optimization

• Utilize advanced analytics tools to analyze campaign performance, identify trends, and make data-driven recommendations.
• Implement testing methodologies and optimization strategies to continuously improve campaign effectiveness.

Budget Management

• Manage and allocate advertising budgets effectively, ensuring an optimal return on investment.
• Provide strategic recommendations on budget adjustments based on performance data and business goals.

Stay Ahead of Industry Trends

• Stay informed about industry trends, emerging technologies, and changes in the digital advertising landscape.
• Integrate new opportunities and innovations into the paid media strategy to maintain a competitive edge.

Qualifications and skills

• Bachelor’s degree in Marketing, Advertising, Business, or related field.
• At least 2 - 3 years of working experience in the related field is required for this position.
• Proven experience in a leadership role within paid advertising, with a track record of successful campaign management.
• Strong analytical and strategic thinking skills, with the ability to translate data into actionable insights.
• Hands-on experience with Google Ads, Performance Marketing, and Meta Ads Manager. (Tiktok Ads manager will be a bonus.)
• Prior experience as Ad Ops/Ad Operations Specialist, Media Buyer/Media Buy Specialist, and Programmatic Specialist is preferred but not required.
• Proficient in MS Office and Google Office suite e.g Excel Sheets, Word Documents & PowerPoint Presentations.
• Required Skill(s): Google Ads, Performance Marketing, Google Analytics, Google Tag Manager, Facebook Ads Manager.

Benefits and remunerations:

• Annual salary review
• Performance bonus
• Annual & Medical Leave
• Healthcare Benefits
• Transport Claim
• Meal Claim
• Birthday voucher
• Alternative work-from-home schedule

This role presents an opportunity for anyone looking to extend his or her experience in the digital industry and simultaneously grow with our company. Interested candidates, please submit your application here.

**We regret to inform you that only the successful candidate will be notified. **