Responsibilities for this position include:

• Broad-based, hands on knowledge and experience with various types of instrument and electrical systems, equipment and software
• Troubleshoot electrical and instrumentation maintenance issues and complete appropriate documentation
• Update and archive electrical prints, PLC programs, and operator interface software, necessary for the documentation of projects that have gone into production
• Update and archive electrical prints, PLC programs, operator interface software, necessary for the documentation of projects that have gone into production
• Design electrical control and communication systems for production equipment
• Coordinate the installation of electrical equipment by contractors and plant personnel to meet scheduled completion dates
• Carry out the effective delivery of electrical, mechanical and fabric maintenance to both plant equipment and building equipment on the Client’s sites

Desired experience for electrical maintenance engineer includes:

• Provide technical support to Maintenance for AC and DC electronic drives, Programmable Logic Controllers, and control systems
• Provide cost estimates for new projects and system upgrades
• Develop specifications for projects to assure completion of work on schedule with required materials and workmanship
• Assist Production and Maintenance in the start-up and operation of new equipment and facilities

Scope of job:

1. Installation and Commissioning:

• Install electrical systems, equipment, and machinery as per technical specifications and safety regulations.
• Assist in the commissioning of electrical systems and ensure they are operating correctly.
• Ensure all installations are in compliance with the relevant codes and standards.

2. Maintenance & Troubleshooting:

• Conduct routine maintenance checks on electrical systems to ensure efficient functioning.
• Diagnose faults, troubleshoot electrical problems, and repair or replace faulty components.
• Provide preventive maintenance to avoid breakdowns and optimize system performance.

3. Customer Support:

• Offer on-site and remote technical support to customers, ensuring customer satisfaction.
• Respond to customer queries and resolve electrical issues promptly.
• Provide training and guidance to customers on proper use and maintenance of electrical systems.

4. System Upgrades:

• Assess and recommend upgrades to existing electrical systems and equipment.
• Implement system improvements to enhance functionality, safety, and efficiency.

5. Safety & Compliance:

• Follow all safety protocols, electrical codes, and regulations to maintain a safe working environment.
• Conduct safety inspections and risk assessments on electrical systems and equipment.
• Ensure compliance with local, national, and industry-specific electrical standards.

6. Documentation & Reporting:

• Maintain accurate records of service activities, including repairs, maintenance, and customer interactions.
• Prepare and submit detailed reports on findings, repairs, and service schedules.
• Maintain an inventory of electrical components and tools.
• Monitor progress on the works carried out and coordinate with customer and shipyard on site during Repair and Commissioning Job.
• Prepare timesheets and service report upon completion of all works and ensure all document is properly endorsed/verified by customer and uploaded to serve on time.

7. Collaboration & Coordination:

• Work closely with project managers, technical teams, and clients to understand service requirements.
• Coordinate with suppliers and vendors for spare parts and service tools.
• Collaborate with colleagues to ensure efficient and effective project execution.

8. Continuous Improvement:

• Stay updated with the latest electrical technologies, techniques, and industry best practices.
• Attend training and certification programs to enhance skills and knowledge.
• Contribute ideas for improving service efficiency and customer satisfaction.

Required Skills & Qualifications:

· Education:

• A bachelor’s degree or equivalent qualification in Electrical Engineering, Electronics, or a related field.
• Certification in electrical systems or maintenance (e.g., NEC, NFPA) is a plus.

· Experience:

• Proven experience as an Electrical Service Engineer or similar role (typically 5 years above).
• Hands-on experience with electrical systems, wiring, motors, circuit boards, and related components.
• Familiarity with diagnostic tools, testing equipment, and electrical schematics.

· Technical Skills:

• Strong knowledge of electrical systems, circuits, and components.
• Proficient in using electrical diagnostic tools, multimeters, and testing devices.
• Understanding of electrical safety regulations and standards.

· Soft Skills:

• Excellent problem-solving and troubleshooting abilities.
• Strong communication skills (both verbal and written).
• Ability to work independently and as part of a team.
• Customer-oriented with a focus on delivering high-quality service.

Physical Requirements:

• Ability to lift and carry heavy electrical components and tools.
• Ability to work in confined spaces or at heights when required.
• Comfortable working in various weather conditions for outdoor jobs.
• Commissioning, start-up, and testing of mechanical, hydraulic, control system and electric integration system on newly build vessel.
• Recommendation of Spare Parts or solutions to customer during Repair or Troubleshoots Works.
• Constant monitoring of the progress and quality on the works carried out and coordinate with customer and shipyard on site during Repair and Commissioning Job.
• Ensure our Equipment’s perform as per requirement and satisfaction of Customer.

Work Environment:

• The role requires travel to client sites for installations, maintenance, and repairs.
• Work hours may vary based on project deadlines or emergency service calls.

Responsibilities:

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and clients’ requirements
• Work closely with the Professional Engineers, regulatory authorities and contractors to provide supervision on site, to resolve all site issues and ensure timely completion of the projects
• Implement the site supervision quality and safety assurance system
• To carry out all inspection that is under KTP’s submission, Including ERSS, and specialist work that will need his supervision, whenever required.

Requirements:

• Degree in Civil Engineering recognised by BCA, Singapore
• Must be an accredited Resident Engineer with IES, Singapore, upon successful hiring
• Fresh graduates / Resident Engineers with other specializations are welcome to apply
• Candidates with HDB experience are an added advantage and strong encouraged to apply

Energy Engineer

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

About the Role:

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

Critical Responsibilities but not limited to:

Cost Transformation and Energy Management

• Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.
• Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.
• Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program
• Support the computerized energy monitoring system for the site to drive efficiency and sustainability
• Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.
• Provide expertise in conducting energy audit, evaluating options and providing solutions
• Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation
• Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts
• Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

• Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate
• Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets
• Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations
• Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site
• Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.
• Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

• Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan
• Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels
• Ensure projects are timely, on budget and completed in compliance to safety and quality
• Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

SHE

• Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards
• Seek opportunities to improve company SHE standards and move company towards goal on injury free workplace & better environment

cGMP Standards

• Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards
• Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions
• Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance
• Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Requirements:

• Bachelor’s Degree in Engineering related fields
• Singapore Certified Energy Manager
• At least 5 years’ experience in energy engineering, manufacturing, consultancy or equivalent industry
• Demonstrate leadership behaviour
• Project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.
• Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance, and calibration.
• Demonstrated capability in vendor service contracts management & knowledge of our System Life Cycle Methodology.
• Understands maintenance programs and requirements (reliability-centred, preventative, predictive).
• Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

Reg No: R22104540

EA License no: 94C3609

· Manage and grow customer base on the assigned product range.

· Prospecting sales visits and regular follow-ups to customer relationship

· Offer commercial and technical proposals or quotations according to technical specifications and customer requirements

· Tender preparation, sales presentations, conversion of prospects to customers and after-sales service

· Gather regional market and competitor information (technical, prices and product development), ensure meeting pre-determined targets.

· Formulation and execution of market growth strategies for tasked Segment and territories

· Collaborate and work with other department/ regional offices to maximise growth and orders

· Prepare and deliver technical presentations and demonstrations to clients

· Collaborate with the engineering and product development teams to understand product specifications and capabilities.

· Oversee and coordinate the installation and implementation of products and systems.

· Ensure projects are completed on time, within scope, and within budget.

· Prepare and present sales proposals, contracts, and agreements.

· Track and report on sales performance and progress against targets.

· Maintain accurate records of customer interactions and transactions.

· Provide post-sales support to ensure customer satisfaction and repeat business.

· Address customer inquiries and resolve issues in a timely and effective manner.

· Gather customer feedback and work with internal teams to improve products and services.

· Traveling within the designated region to meet clients and manage projects as require.

· Participate in industry conferences, trade shows, and networking events to promote the company and its products.

Requirements:

· Diploma in Marine/Mechanical/Electrical/electronic/Engine

· Possess good sales and customer service knowledge

· 7-10 years of sales experience in marine diesel engine or marine equipment related experience.

· Self- motivated, independent and sales driven to develop and increase revenue

· Strong learning curves in upgrading technical knowledge

. Excellent presentation and negotiation skills

· Regional travelling is required

· Good oral and written communication skills in English and Chinese

. ⁠Other assigned duties

For more information, please reach us at [email protected]

*Only shortlisted candidates would be notified*

Job Descriptions:

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints.
• Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues.
• Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives.
• Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements:

• Diploma/Degree in Mechanical Engineering/relevant field
• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus.
• Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

• Facilitates planning and development ofquality control systems for specifiedproducts or processes.
• Collaborates with teams of engineers andproduct specialists to ensure customer anddivision quality requirements are met.
• Identifies the root cause of qualityproblems, and coordinates modificationsor other corrective actions.
• Liaising of Calibration Program.
• Periodically inspect instrument accordingto the specified schedule date
• Reviews design, manufacturing, and testingdocumentation.
• Update our Quality Management system(QMS) with incidents, fixes andimprovement.
• Offers technical guidance and support inresponse to quality testing and analysis.
• Ensures contract compliance by reviewingand approving quality requirements forsupplier purchase orders, manufacturing,and other related services.
• Performs other duties as assigned.

Responsibilities:

• Understand Contract Specification.
• Understand Marine Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and Piping routines.
• Good knowledge in preparing Technical specification and Material take off (MTO).
• Review and comments technical proposal from vendor.
• Technical Bid Evaluation for procurement.
• Monitor procurement process to meet Project Schedule.
• Review vendor certified Document (VCD).
• Monitor piping bulk material usage, surplus material and warehouse balance utilisation.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Attend factory acceptance test (FAT) if required.
• Able to perform piping procurement related activities with no or minimum supervision.

Requirements

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies.

By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

1.1. Lead and manage the implementation, delivery and operations of digital services, including ICT governance, budget management, application architecture and stakeholder engagement to achieve digital services transformation for the agency.

1.2. Provide experienced technical leadership and direction for digital services

1.3. Define application architecture framework for various components in the end-to-end digital solution and build architecture roadmap.

1.4. Review existing design and implement solutions for improvement from performance, security and usability perspective

1.5. Involved in procurement and vendor management.

1.6. Develop risk identification, quantification and mitigation plan.

1.7. Understand and ensure compliance with policies, standards, and guidelines in Infocomm Technology and Smart Systems Management defined by Singapore Government.

1.8. Prepare technical documentation and design, and conduct sharing sessions

1.9. Improve relevant work systems, processes and SOPs to achieve consistent results.

1.10. Good knowledge of next generation IT, such as cloud technology, IoT, data analytics, system architecture, etc

1.11. Work with Project Manager and clients to handle resources, scope, and schedule

1.12. Design Technology and Application architecture.

1.13. Convert system requirements into software architecture and design documentation.

1.14. Interface and coordinate tasks with Module Leaders to ensure all modules within the system are progressing as planned, and modules can be integrated smoothly.

1.15. Understand and determine clients’ requirements, expectations and design the technical infrastructure.

Job Requirement

1.1. Relevant background in Computer Science/Computer Technology or equivalent.

1.2. Minimum 8 years of working experience in digital service implementation, IT outsourcing management and ICT security.

1.3. Hands-on experience across the spectrum of Web and mobile technologies, such as Microsoft .NET technologies (e.g. C#, ASP.NET MVC 5), HTML5, JQuery, JavaScript, CSS, Microsoft SQL Server/Oracle database management

Roles & Responsibilities

* Project management, system testing, technical analysis

* Providing engineering design support

* technical documentation

* Performing analysis and diagnostics for battery energy storage systems

* Managing battery energy storage systems

Job highlights

4 off days monthly, rest days depend on schedule

Competitive salary 3k and above

Positive and nurturing working environment

Work location: co location

Duration: permanent

Requirements

Qualifications - diploma or high school diploma above

Work experience- at least two year working experience in related fields

Job type- full time

Required languages: English and able to communicate with mandarin speaking customers

Job specialisation- services,engineering

If you have an interest in applying for this role, please WhatsApp me at 98198786 to apply. Only shortlisted candidates will be notified. Priority will be given to Singaporeans

Young hon Lim/ manager

Render private limited

EA licence no 15c7827

Responsibilities:

• Prepares key project documentation in executing the complete Telecom and Navigation engineering scope of work as per the project requirements in meeting customer’s expectations
• Prepares telecom system concepts, schedule of deliverables and plan activities in line with overall project schedule, delegate the tasks to telecom team member assigned to the project and monitor the progress
• Leads telecom teams to prepare documents, such as design philosophies, block diagrams, room layout and deck arrangement, cable schedules and etc
• Leads telecom teams to perform system design verification, such as PAGA sound coverage, PAGA voltage drop calculation, Link budget, system redundancy cabling etc. Coordinates with other engineering team members (i.e.yard engineering, basic design and etc.), subcontractors and consultants on technical issues and design solutions in meeting project deliverables
• Leads telecom team to prepare procurement engineering documents, such as technical specifications, equipment data sheets, MTO, technical bid evaluation etc
• Participates in project meeting/technical meeting/3D model review/Workshop, attends to basic technical queries and issues related to Telecom and Navigation system design and reviews the deliverables (i.e.VCD, third party study report, workshop report etc)
• Participates and support for Digital Security review regarding the network design and security implementation
• Liaises with owners, statutory and classification authorities for design compliance review and approval on the proposed project plans in meeting project requirements
• Works with Procurement and project team to source for Telecom & Navigation vendors or Telecom System Integrator in complying with the project technical requirement specifications in meeting project deliverables
• Prepares engineering deliverable such as interconnection diagram, termination diagram, room & equipment layout in compliance with requirements of contract, classifications and regulations and coordinate with various disciplines for material handling, working environment requirement, constructability and installations, operations and maintenance, and safety etc
• Provides solutions to commercial, production and project team members on all aspects of Telecom engineering to support new-built’s/conversion fabrication, installation, testing and commissioning activities
• Performs technical studies and site survey in cooperation with production team members and Telecom & Navigation vendors or Telecom System Integrator for conversion project and/or repair & life extension project
• Performs any other duties as assigned by superior(s) from time to time

Requirements:

• Bachelor’s degree in Electrical and Electronics Engineering, Telecommunication Engineering or related engineering disciplines
• 3 years of working experience in planning, designing and construction of Telecom and Navigation system in the oil and gas industry
• Experience in telecom and navigation system design in Pre-FEED, FEED, EPCC, Conversion and Repair & Life Extension.
• Familiarity with USCG and BSEE requirements will be an additional advantages
• Excellent proficiency in English (written and spoken)

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

Geotechnical:

- Experienced in the design and design management of major earth retaining and stabilizing structures, deep foundations, reclamations, ground improvements, slope stabilities.

- Familiar with the preparation of Geotechnical Interpretative Reports.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

· Technically sound and consistently designed and delivered to client’s project requirements

· Preparation of design report, calculation, drawings, specification, cost estimates and schedules for project assigned.

· Assist Professional Engineer in management of preparation, liaison, and follow up with authority submission and approval.

· Liaison with client, architects, QS and other project consultants throughout the duration of projects.

· Supervise and guide employees assigned to the projects

· Role as project manager

· Implementation of QA/ QC

· Any other duties as assigned

Requirements:

· Diploma in Mechanical Engineering from a recognized Polytechnic with more than 5 years of working experience in engineering design consulting practice on Building Services projects

· Degree in Mechanical Engineering from a recognized University and eligible for registration with the Professional Engineers Board with more than 3 years of working experience in engineering design consulting practice on Building Services projects.

· Being a Professional Engineer is an advantage.

· Strong project technical knowledge and design softwares

· Good supervision and project management skills

· Excellent with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Lead team of staff for successful delivery of projects

· Strong analytical skills would be preferred

· Excellent interpersonal, good written and verbal communication skills

· Strong time management and resources management skill

If you wish to have the opportunity to work in an international consultancy firm which offers attractive remuneration, a 5-day week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park #06-08

The Strategy Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified.)

About Us

VFlowTech (VFT) is reinventing energy storage with Vanadium redox flow technology, with a vision to develop the cheapest and most scalable Vanadium redox flow batteries in the world. VFT storage solution has an expected life span of 25 years and is proven to be one of the safest and most environmentally friendly battery technologies. VFT founders have deep experience in the renewable space, and Vanadium redox flow technology. VFT is a spin-off of the CleanTech lab of Nanyang Technological University (NTU), Singapore, and benefits from unique IP arising from many years of intensive research at NTU.

The Cloud Software Engineer must be able to work effectively in a collaborative, fast paced environment providing experience on energy storage systems. They will demonstrate strong project management, development, and execution capabilities. The successful candidate will be an innovative thinker, fast-learner, collaborative worker, and self-starter with a passion for the renewable energy industry holding a track record of success thriving in a high growth environment.

Responsibilities:

· Develop and Collaborate on IoT products and solution in cloud based IoT Platform by interfacing Energy Management Systems (EMS) and Battery Management System (BMS).

· Design, Development, Testing and Maintenance of IoT Cloud Software stack in Energy Management Systems (EMS) and Battery Management System (BMS).

· You should be familiar with the operation of ESS (Energy Storage Systems) and implement various energy and battery management graphs and data display and will need to have passion for battery and energy management solutions.

· You should follow software development lifecycle practices including design and reviews, testing and regression, revision control, and user documentation.

Requirements:

· Minimum Bachelor’s Degree in computer/electronics engineering or relevant discipline with minimum 2 years of relevant professional development experience.

· Must have software development experience in C/C++, Python, JavaScript, NodeJS, JSON and SQL or other relevant programming languages.

· Experience with IOT cloud technology, instrumental monitoring, remote monitoring and IoT Device knowledge (Gateway, Sensor).

· You should have knowledge of communication interfaces and protocols, such as RS232, RS485, CAN, Modbus-TCP, Modbus-RTU, etc.

· Familiar in DevOps practices and CI/CD pipelines

· You will be required to travel for business.

· Knowledge on battery technology would be ideal

Mandatory Skills

Key Responsibilities

• Create complex, enterprise-transforming applications in high-energy, collaborative teams.
• Work with the latest tools and techniques in a hands-on coding environment, often utilizing pair programming.
• Build high-quality, maintainable code in a collaborative team environment.
• Demonstrate a solid understanding of model implementation, data structures, data manipulation, distributed processing, application development, and automation.
• Possess knowledge of consumer financial products, data systems, environments, and processes critical for the implementation of Risk and Finance models.

Essential Skills & Prerequisites

• Bachelor’s/Master’s degree in Computer Science, Engineering, Sciences, Mathematics, or a numerate subject, with 6 years of relevant experience.
• Hands-on development experience with PySpark, Scala Spark, and distributed computing.
• 4–6 years of experience in:
• Designing and developing applications using Python.
• Working on the Hadoop platform (Hive, HDFS, and Spark).
• 3–5 years of experience in Unix shell scripting and SQL.
• 2–3 years of experience in Spark programming.
• Knowledge of microservices architecture and cloud computing is an advantage.
• Familiarity with Java and Scala is beneficial.

Desired Skills

• Additional experience in developing service-based applications.
• Excellent analytical skills, including proficiency in MS Office and the ability to produce board-level documentation.
• Fluency in written and spoken English, with strong communication and interpersonal skills.
• Self-starter with the ability to meet challenging personal targets and maintain a big-picture outlook with attention to detail.
• Understanding of current technologies used by Tier 1 Investment Banking Institutions.
• Team-oriented mindset.
• Advantageous experience includes:
  • Working in the financial or banking industry.
  • Knowledge of Avaloq, Windows Batch Scripting, T-SQL, and Python.

Mandatory Skills Summary

• Hands-on development experience with PySpark, Scala Spark, and distributed computing.
• 4–6 years of experience in:

· Python development.

· Hadoop platform (Hive, HDFS, Spark).

• 3–5 years of experience in:

· Unix shell scripting.

· SQL development.

• 2–3 years of experience in Spark programming.

Mandatory Skills

Key Responsibilities

• Create complex, enterprise-transforming applications in high-energy, collaborative teams.
• Work with the latest tools and techniques in a hands-on coding environment, often utilizing pair programming.
• Build high-quality, maintainable code in a collaborative team environment.
• Demonstrate a solid understanding of model implementation, data structures, data manipulation, distributed processing, application development, and automation.
• Possess knowledge of consumer financial products, data systems, environments, and processes critical for the implementation of Risk and Finance models.

Essential Skills & Prerequisites

• Bachelor’s/Master’s degree in Computer Science, Engineering, Sciences, Mathematics, or a numerate subject, with 6 years of relevant experience.
• Hands-on development experience with PySpark, Scala Spark, and distributed computing.
• 4–6 years of experience in:
• Designing and developing applications using Python.
• Working on the Hadoop platform (Hive, HDFS, and Spark).
• 3–5 years of experience in Unix shell scripting and SQL.
• 2–3 years of experience in Spark programming.
• Knowledge of microservices architecture and cloud computing is an advantage.
• Familiarity with Java and Scala is beneficial.

Desired Skills

• Additional experience in developing service-based applications.
• Excellent analytical skills, including proficiency in MS Office and the ability to produce board-level documentation.
• Fluency in written and spoken English, with strong communication and interpersonal skills.
• Self-starter with the ability to meet challenging personal targets and maintain a big-picture outlook with attention to detail.
• Understanding of current technologies used by Tier 1 Investment Banking Institutions.
• Team-oriented mindset.
• Advantageous experience includes:
  • Working in the financial or banking industry.
  • Knowledge of Avaloq, Windows Batch Scripting, T-SQL, and Python.

Mandatory Skills Summary

• Hands-on development experience with PySpark, Scala Spark, and distributed computing.
• 4–6 years of experience in:

· Python development.

· Hadoop platform (Hive, HDFS, Spark).

• 3–5 years of experience in:

· Unix shell scripting.

· SQL development.

• 2–3 years of experience in Spark programming.

MAIN RESPONSIBILITIES:

The Field Service Engineer is responsible for providing technical field assistance in promoting spare part sales, maintenance, operation, equipment installation supervision and startup and/or shutdowns for all CPM processes. The Field Service Technician must have strong business and communications skills to establish and maintain strong relationships with the customer. Analytical and problem-solving skills are just as essential to this position.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Promoting aftermarkets/replacement spare parts or services for existing and potential new customers

· Identify customer's needs and sales opportunities to help future growth

· Provide technical field assistance in maintenance, installation, operation, and startup for CPM equipment; prepare customer field report after each trip.

· Perform inspections of existing CPM equipment during plant shutdowns, assist plant/contractors with recommended repairs/parts and provide each customer with a field report.

· Evaluate fabricated product when asked; prepare non-conformance report when necessary and work with internal and external customers to resolve issues.

· Provide technical training or maintenance presentations to relevant customer and responsible for tracking customer claim.

· Work integrally with internal employees and external customers to promote the CPM Aftermarket service, to meet group initiatives and objectives.

· Assist contractors in the erection of CPM equipment at customer site.

· Participate in company meetings in order to increase communication, understanding, and teamwork.

· Cross train with engineers/technicians to learn technical processing information.

· Observe all customer and OSHA safety rules.

· Perform other related duties as required and assigned.

QUALIFICATION AND SKILLS:

· Associate degree or equivalent from a two-year college or technical school, preferably in Engineering.

· A minimum of 2 years of experience in animal feed or biomass related manufacturing industry.

· Good written and verbal communication skills.

· Establish and maintain effective working relationships with co-workers, customers, and vendors.

· High integrity and ethics.

· Working knowledge in AutoCAD is a plus point.

· Required knowledge of Microsoft Office.

· Be able to communicate in English fluently and at least one local language.

· Ability to travel on need basis – domestically or internationally and up to 50% of the time.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Identify, propose and evaluate new business opportunities for business growth, with respect to the sale/purchase of refining products including procurement of intermediate components for value-added feedstock/blending entities, and third-party service collaboration.
• Coordinate with internal and external stakeholders to establish operating, commercial and accounting procedures for managing third-party contracts and agreements.
• Oversee day-to-day refinery performance and ensure stakeholders adherence to contractual quantity and obligations. Liaise and collaborate with stakeholders to resolve issues and concerns.
• Work closely with internal stakeholders to support the needs of refinery feedstock demand and supply of products, to achieve optimal refinery operation.

• Degree in Chemical Engineering

• At least 2 years' relevant experience in oil refinery/petrochemical.
• Experience in process/development engineering or commercial work knowledge will be advantageous

Tasks:

● Develop and implement navigation algorithms for autonomous robots, including

localization, mapping, and path planning.

● Integrate sensor data from various sources (lidar, cameras, IMUs) to improve robot

perception and navigation capabilities.

● Work with simulation tools to validate and debug navigation algorithms in a virtual

environment.

● Collaborate with other team members to ensure overall system integration and

functionality.

Education:

● A bachelor's or master's degree in Robotics, Computer Science, Electrical

Engineering, or a related field is typically required.

Technical Skills:

● Robotics: In-depth understanding of robotic systems, kinematics, dynamics,

and control theory.

● Navigation algorithms: Proficiency in developing localization, mapping, and

path planning algorithms for autonomous robots.

● Sensor fusion: Experience with integrating data from various sensors (such as

lidar, cameras, IMUs) to improve robot perception and navigation.

● Linux, ROS, C++ and Python are your thing and you are familiar with modern

software development processes.

● Simulation tools: Experience with robotic simulation frameworks like Gazebo

or V-REP.

● Problem-solving and analytical skills: Strong analytical and problem-solving

abilities are vital for identifying issues, debugging complex systems, and

proposing effective solutions.

● Communication and teamwork: Excellent verbal and written communication

skills to collaborate with cross-functional teams, document technical

specifications, and present findings effectively.

Experience:

● Robotic navigation: Prior experience in developing navigation systems for

autonomous robots, including localization, mapping, and path planning.

● Sensor integration: Knowledge of integrating sensors like lidar, cameras, or

IMUs into the navigation system.

● ROS: Practical experience with the Robot Operating System (ROS) for robotic

software development and integration.

· Preparation of design report, calculation, drawings, specification, cost estimates and schedules for project assigned

· Management of preparation, liaison, and follow up with authority submission and approval.

· Liaison with client, architects, QS and other project consultants throughout the duration of projects.

· Supervise and guide employees assigned to the projects

· Role as project manager

· Implementation of QA/ QC

· Any other duties as assigned

Requirements:

· Degree in Electrical Engineering from a recognized University and eligible for registration with the Professional Engineers Board

· Professional Engineer Certification will be an advantage

· At least 6 years of working experience in engineering design consulting practice on mechanical projects.

· Good project technical knowledge and design softwares

· Good project management and technical skills

· Familiar with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Team player and able to work independent with minimum supervision

· Able to work under pressure with good time management skill

· Good analytical skills would be preferred

If you wish to have the opportunity to work in an international consultancy firm which offers attractive remuneration, a 5-day week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park #06-08

The Strategy Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified.)

Job Description:

• Aggressively build, maintain and grow accounts & relationships with key clients to achieve sales earnings and management established targets & objectives
• Grow products sales revenue and earnings per client
• Create, identify and solicit aggressively new project potentials by proactively sourcing for sales opportunities
• Identify, Qualify, Present, Negotiate and Close complex deals
• Build and maintain strong relationships with major clients and trading partners
• Tender preparation / assessment of commercial viability to bid, review technical requirements, customer specification review, best vendor assessments, deriving costing estimates, product / vendor sourcing, commercial negotiations
• Maintain high level of customer satisfaction by following up closely with inter-departments, customers & vendors during pre-sales, order, or post -sales processes to deliver end results effectively
• Sales forecasting, project coordination, after sales support, sales presentations
• Participate in trade shows, exhibitions and conferences
• Prompt submission of reports
• Provide product on networking and data-communication products/solutions within an industrial application environment
• Developing solutions, design & consultancy
• Providing pre-sales advice and consultancy on systems
• Interface with principals on technical aspects of products and solutions
• Manage, develop, build and maintain strong relationship with principals and partners on focal products/solutions under its charge
• Keep abreast of new developments and innovations and/or improved related product applications in areas of responsibility
• Additional role may be assigned by management from time to time.

Job Requirement:

• Diploma or Higher in electrical & electronics engineering or equivalent
• At least 1 year of relevant experience in BD or sales role
• Experience in IT industry or related industries an advantage
• Knowledge of industrial & commercial telecommunication systems and its applications
• Experience in the promotion of industrial and/or telecommunication systems, with proven track records in securing projects related to Telecommunication Solutions (such as network, ex-proof and electrical products)
• Technical experience with industrial and/or telecommunication systems and good understanding of equipment specification is an advantage.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

Responsibilities:

• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in all electrical engineering designs, calculations, preparing bill of materials including measurement and sizing, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in construction, installation, testing and commission activities.
• Able to use autocad/drafting software and also guide drafters for drafting

Requirements:

• Good team player. Can work with others harmoniously.
• Willing to learn new activities.
• Good communication skills in English both written & spoken.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Must know how to operate and draw in AutoCAD.
• Must know basic fire and gas detection knowledge.
• Must know how to operate MS office (minimum Word and Excel).
• Prepared to travel if required for overseas meeting
• Min Diploma/ Degree in Engineering or related field.

Job Description & Requirements

* Design, analysis and plan for Civil & Structural engineering works
* Liaise with consultants, contractors & authorities from inception to completion of projects on C&S matters
* Responsible for timely submission of plans and reports to authorities and clients
* Manage projects to meet the time, cost and quality objectivies
* Coordinate and monitor work progress at site including periodical site inspection and attending meeting
* Assists in other ad hoc duties as assigned

Requirements:

• Able to work independently with minimal guidance.
• Proficient in MS Office/Excel
• At least 3 years of local construction experience
• Knowledge in AutoCAD / BIM software is added advantage.
• At least Diploma/ Degree in Civil & Structural engineering or equivalent recognized by the Professional Engineers Board
• Fluent in English , Good project management and communication skills

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Work Scope:

• To repair electrical and electronic component of plastic processing machinery and equipment.
• To modify electrical and electronic circuit of machinery and equipment for upgrading, data logging & process automation etc.
• To install or de-install electrical works for factory building or machinery.
• To conduct periodical maintenance for electrical and electronic related works.
• To update and maintain electrical circuit drawing of all machinery and installation.
• To design and build new machinery that may improve production efficiency of factory.
• To assist in procurement for components and parts.
• To keep tooling in organized manner.
• Other duties as and when assigned by the company.

Job Requirement:

• Diploma or certification in Electrical Engineering or a related field.
• Minimum of 3 years of experience in industrial electrical maintenance.
• Able to read single-line diagram.
• Hands on experience in electrical installation and cabling
• Able to work independently with discipline.
• Have teamwork and is committed.
• Able to cooperate on overtime arrangement.
• On-job-training will be provided.

Working Conditions:

• Full-time position with potential for overtime.
• May require working in various environmental conditions, including high noise levels and confined spaces.
• Must be able to lift and carry heavy equipment as needed.