Role Overview:

We are seeking an experienced QA Engineer with a strong background in the oil and gas sector, specifically in FPSO projects. The QA Engineer will be responsible for ensuring that all quality assurance and quality control procedures are in place, adhered to, and continuously improved throughout the project lifecycle.

Key Responsibilities:

1. Quality Management System (QMS):
   Develop, implement, and maintain the project-specific Quality Management System in alignment with ISO standards.
   Ensure compliance with company policies, client requirements, and regulatory standards.
2. Project QA Oversight:
   Conduct regular quality audits, inspections, and surveillance activities on FPSO project sites.
   Identify and document non-conformances, and lead the resolution process to prevent recurrence.
   Ensure that all QA documentation is properly maintained and accessible.
3. Supplier and Vendor Quality Control:
   Review and approve vendor QA/QC documentation.
   Conduct supplier audits to ensure compliance with project quality requirements.
   Coordinate with procurement teams to ensure that materials and equipment meet quality specifications.
4. Engineering & Fabrication Quality Assurance:
   Ensure that engineering designs, drawings, and specifications comply with quality requirements.
   Monitor fabrication and construction activities to ensure they are carried out according to approved procedures and quality standards.
5. Testing & Commissioning:
   Oversee testing and commissioning processes to ensure systems meet quality standards before handover.
   Verify that all test procedures and results are properly documented.
6. Risk Management:
   Identify potential quality risks and implement mitigating measures.
   Participate in risk assessments and HSE (Health, Safety, and Environment) meetings.
7. Training and Continuous Improvement:
   Provide training to project teams on quality processes and best practices.
   Promote a culture of continuous improvement by identifying opportunities for process optimization.

Qualifications:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 5 years of experience in a QA role within the oil and gas industry, with specific experience in FPSO projects.
• In-depth knowledge of quality management systems (e.g., ISO 9001) and industry standards.
• Strong understanding of fabrication, construction, and commissioning processes for FPSOs.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership skills.
• Certification in quality auditing (e.g., ISO 9001 Lead Auditor) is an advantage.

Job Description & Requirements

Responsibilities:

· Direct and Supervise WIP and Final Inspections

· Handle and Approve First Article Submissions

· Understand & Ensure Compliance with customer’s requirements

· Monitor, maintain and continually improve quality standards.

· Resolve Quality issues with internal and external parties.

· Supervise and maintain calibration of measuring equipment

· Review on non-conformances & approve disposition actions.

· Create 8D reports.

· Provide periodical quality review and trainings

· Involve in First Article Product and process development

· Assist in maintaining ISO System, reports, follow-up and closure

Requirements:

· Minimum Diploma in Mechanical/ Manufacturing or related Engineering field.

· Minimum 5 years in related field.

· Knowledge on measuring and statistical techniques

· Knowledge on CMM Machine

· Responsible, Positive Attitude and able to work well as a team.

· Able to lead a team of quality operators

· Able to work in Tuas area

· Class 3 license is an advantage

If you are interested to join our enriching and challenging environment, please submit a comprehensive resume to: [email protected] to include:

1. Recent passport-sized photo

2. Current Salary

3. Expected Salary

4. Notive Period

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

Candidates are expected to performance quality inspections on incoming products.

He/she is also be expected to prepare/handle FAI reports and non-conformance reports.

Liaise with customers and suppliers on quality requirements and matters.

He/she who is familiar and have experience with C-parts (fasteners, small mechanical components etc) will be preferred.

Technical knowledge of mechanical components would be advantageous.

Familair with quality documentations. ISO.

Willing to learn and be a team player.

Candidates with relevent experience may be considered for senior positions.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

• Develop and implement quality assurance plans, standards, and protocols for production or project management.
• Review project specifications and engineering drawings to establish quality standards.
• Ensure all work complies with relevant codes, ISO standards and regulations.
• Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database.
• Identify and document any quality issues, non-conformance and corrective actions.
• Providing guidance and advice to the Project Manager on significant changes to the quality management system with direct impact on site operations.
• Training the production team on quality control measures to improve product excellence.
• Collaborate with production, engineering and project management teams to identify and implement process improvements.
• Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements.
• Conduct root cause analysis for site level NCRs and recommend corrective action and preventive actions.
• Overall knowledge of safety policies and procedures to achieve safe work practices.

Requirements:

• Diploma /Degree in Engineering, Quality Management or related filed.
• Minimum 5 to 8 years of working experience quality assurance/control in industrial /equipment production or engineering projects would be advantageous.
• Proficient in quality inspection tools, data analysis and report writing.
• Up to date knowledge of federal and industry standards and best practices.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Excellent problem solving and analytical skills.
• Keen attention to detail.
• Willingness to travel for site inspections.
• Able to work independently and a good team player.
• Candidate who can start work within short notice or immediately would be advantageous.

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processes & controls.
• Able to Liaise & resolve with customers on quality related issues.
• Data Compilation, Co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processes & controls.
• Able to Liaise & resolve with customers on quality related issues.
• Data Compilation, Co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001

Job Description & Requirements:

• Coordinate with HOD's and HR on namelist for QA training matter.
• Liaise with external providers and HOD's on calibration and verification schedule.
• Schedule sample collection, prepare sample and sample labels.
• Check temperature data and highlight to QA executive on any trends or data above the limit.
• Monitor site cleanliness and staff PPE's.
• Monitor product weight and temperature.
• Check and key-in returned goods data.
• Keeping and recording of retention samples; disposal of retention sample.
• File all documents and records accordingly; maintain obsolete files
• Coordinate with HOD's on schedule; maintain visit calendar for audits purpose.

Education requirements:

• Preferably a Diploma in Applied Food Science or relevant field of study
• All are welcome to apply, including fresh Diploma holder in Applied Food Science or relevant field of study and those with relevant work experience.
• Positive thinking and willingness to learn
• Able to work in manufacturing and chilly environment handling fresh meat and processed food.

Incorporated in 1996, Our core business is the supply of fresh and frozen pork.

Our other ventures include Food Manufacturing, Cold Storage, Wholesale / Distribution, and import.

All our raw ingredients are sourced from SFA-approved establishments and quality is controlled through regular scheduled farm / plant surveys.

Some of our products include:

• Free Range Pork
• Fresh & Frozen Pork
• Delicatessen such as Hams & Sausages

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Perform inspections and tests on electrical and instrumentation systems, including cables, panels, field instruments, and control systems.
• Ensure installations and testing comply with approved drawings, project specifications, and relevant standards
• Prepare and review Inspection and Test Plans (ITPs), Method Statements, and Quality Control procedures.
• Maintain quality records, such as test reports, calibration certificates, and inspection checklists.
• Liaise with construction team, subcontractors, and corporate QMS department to address quality-related issues
• Support commissioning activities by ensuring all quality requirements are met before system handover
• Ensure compliance with industry standards, local regulations, and safety requirements
• Any other duties to be assigned from time to time

Pre-requsities

• Degree/Diploma in Electrical Engineering or related field
• Minimum 5 years of experience in power or industrial plant construction projects
• In-depth knowledge of electrical systems for critical equipments in power plant construction
• Proficiency in inspection and testing of electrical and instrumentation systems
• Effective communication and interpersonal skills for collaboration with multidisciplinary teams
• Commitment to safety and compliance with regulatory requirements
• Project location: Jurong Island (Transport provided at designated pick-up points)

Key Responsibilities

• Evaluate the suitability of new materials for product development in alignment with customer requirements.
• Ensure all incoming materials meet defined quality parameters.
• Preparing chemical formulations of new products.
• Conduct trial blends, assess results, and optimize formulations.
• Develop and evaluate product formulations based on test results and customer specifications.
• Ensure finished product test results comply with customer requirements.
• Maintain and develop quality assurance/control procedures to ensure product consistency and compliance.
• Oversee test method development, transfer, and validation to ensure reliable and accurate product testing.
• Provide technical support to the sales team, assisting with product knowledge and customer inquiries.
• Supervise and manage the issuance of job orders for production, ensuring product specifications are met.
• Supervise lab staff, ensuring productivity and adherence to quality standards.
• Conduct training on product knowledge, lab practices, and quality procedures to enhance team skills.
• Oversee the maintenance, calibration, and troubleshooting of laboratory equipment, ensuring efficient and accurate operations.
• Manage laboratory resources, including budgeting and resource allocation, to ensure operational efficiency.
• Enforce a strong safety culture in the laboratory, ensuring strict adherence to Health, Safety, and Environmental (HSE) regulations, protocols, and procedures.

Key Skills and Personsl Attributes

• Professional experience 11+ years, with relevant functional experience.
• Read, write and speaking ability of English and Mandarin is a must.
• Proven leadership and team management experience.
• Excellent problem-solving skills and attention to detail.
• Strong communication skills for cross-departmental collaboration and customer support.
• Knowledge of ISO 9001/14001/ HSE regulations and safety protocols.

Essential Criteria

• Bachelor's or Master's degree in Chemistry, Chemical Engineering, or a related field.
• Extensive experience in a laboratory environment with a focus on product development and quality assurance.
• Strong knowledge of chemical formulations, testing methodologies, and quality control standards.

1. Job Requirements

A. Educational Qualification and Experience

• Diploma / Degree in Engineering or its equivalent
• 3 to 4 years’ related work experience testing, QA / QC and document control.
• Working experience of ISO 9001
• Understanding of engineering and processes.
• Previous laboratory and tensile testing experience advantageous.

B. Skills and Abilities

• Physically fit able to carry some parts.
• Good problem solving skills.
• Strong math including standard/units of measurement calculations
• Sense of initiative and able to work under minimal supervision or ability to work as a team.
• Working knowledge of machines, equipment, and processes.
• Resourceful and proactive; ability to work in a fast-paced environment
• Attention to Detail: Exceptional attention to detail and accuracy in all tasks.
• Analytical Skills: Strong analytical and problem-solving skills.
• Communication: Excellent written and verbal communication skills.
• Teamwork: Ability to work effectively both independently and as part of a team.

2. Key Responsibilities

• Conduct Internal and External Audits: Plan, execute, and report on external audits to ensure compliance with industry standards and regulations.
• Testing: Ensures product testing incoming and finished product to established standards/procedures;
• Certify, File and control in-house and third party certificates very accurately.
• Filing of all certificates and paperwork both hard and soft copies.
• Maintain complete history of client products in use.
• Liaise with third party surveyors on testing and certifications wherever necessary.
• Review work procedures and method statements for compliance with good work practices.
• Ensure compliance with all safety regulations when carrying out inspections.

• Report daily to QNQC Coordinator/ Engineer and advise him on the client main contractor compliance to contract procedures and standards and any matters effecting quality
• Ensure documentation is clear, precise and accurate, and within the requirements of the applicable construction code and project specifications.
• Working knowledge of ASME SEC
• Perform visual inspection on welds for the following or as applicable
• Flag / identify any welds or items that require NDE to be completed, once completed, ensure this is documented, in case of any items that have had NDE completed and repairs are required
• Report and document internal & external Non-Conformances
• Perform field inspections and quality assurance of construction projects
• Provide daily construction reports and maintain up-to-date files of all construction documents
• Attend and participate in project meetings to keep Project Manager apprised of project progress, status, quality and schedule
• Identify and evaluate potential new observed hazards and implement controls as project's scope of work changes

No deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scope and Responsibilities:

• Support day-to-day Quality Assurance activities in accordance with approved

SOPs / Policies for a multi-product, cGxP contract manufacturing facility

• A good understanding of cGxPs and compliance in a GxP manufacturing

setting performing both supervised and unsupervised tasks

• Receive minimal supervision and able to perform independently on routine

assignments

• Revise, review and approve SOPs, protocols, reports or records

• Make real-time decisions on process events on the floor based on knowledge

of defined SOPs & policies

• Demonstrate appropriate interpersonal skills which encourage collaboration

of individuals or teams to meet objectives

Qualifications:

• Bachelor's Degree in a Science or technical field
• Minimum 5 years’ experience in the biopharmaceutical or biologics industry
• Hands-on prior QA Batch Release and SAP experience
• Understand GMP documentation with a high level of proficiency
• Ability to interpret and evaluate data and summarize results independently

Responsibilities:

• Manage internal and external excursions (MRB or Quality Claims).
• Oversee customer data reporting.
• Conduct quality-related training sessions.
• Support customer surveys and audits.
• Lead continuous improvement activities.
• Perform other ad hoc duties as assigned.

Requirements:

• Degree in Engineering or equivalent.
• Preferably knowledgeable in Statistical Process Control (SPC) and statistical techniques.
• Auditing experience is a plus.
• Understanding of system flow and databases is an added advantage.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage internal and external excursions (MRB or Quality Claims).
• Oversee customer data reporting.
• Conduct quality-related training sessions.
• Support customer surveys and audits.
• Lead continuous improvement activities.
• Perform other ad hoc duties as assigned.

Requirements:

• Degree in Engineering or equivalent.
• Preferably knowledgeable in Statistical Process Control (SPC) and statistical techniques.
• Auditing experience is a plus.
• Understanding of system flow and databases is an added advantage.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

MiRXES is a Singapore-headquartered molecular diagnostic company with R&D, manufacturing, and clinical lab operations in Singapore, USA, Japan, and China. We specialize in microRNA technologies and the development, manufacturing, and provision of diagnostic test kits and clinical services. Our mission is to enable early disease detection and provide insights for better patient care by harnessing the power of microRNA to augment traditional testing. Our vision is to be the world’s leading developer and provider of accurate, actionable, and affordable microRNA-powered diagnostic tests.

Job Location: Tukang

Job Summary

• Maintain and upkeep quality assurance and operational compliance processes within the organization.
• Ensure compliance and adherence to established quality requirements and regulations.

Roles and Responsibilities

Quality Systems:

• Maintenance and upkeep of the quality system.
• Monitoring of quality system processes to ensure compliance to standards, corporate requirements and upkeep of system health.
• Collaborate with Process Owners to set-up/improve processes to achieve compliance and excellence.
• Cross functional collaboration to ensure successful implementation/enhancements to existing processes.
• Document control.
• Drafting and review of documents.
• Assist in 1st, 2nd and 3rd party audits.
• Assist in audit actions.
• Facilitate and assist in risk management activities.
• Upkeep of quality events.
• Monitoring and control of artwork.
• Assist in vendor evaluation/reevaluation.
• Facilitate/assist in validation activities.
• Assist in design/technology transfer.
• Complaint and feedback management.

Product Quality:

• Review of MBR.
• Review of technical documents, inclusive of QC data or technology related documents from design/technology transfer.
• Incoming and outgoing inspection.
• In-process inspection.
• Verification of returned goods.
• Equipment management.

Quality Oversight:

• Act as a point of contact for all quality-related inquiries and issues.

Training and Development:

• Foster a culture of quality awareness and continuous improvement throughout the organization.

Reporting and Analysis:

• Monitoring of quality metrics to line manager.
• Analyze data to identify trends.

Desired Skills & Competencies

• Degree/diploma in a related Science or Engineering discipline
• Extensive experience in quality assurance, preferably in a regulated environment would be an advantage.
• Strong knowledge of ISO 13485, CAP, and ISO 9001 standards would be an advantage.
• Good verbal communication, interpersonal and team skills.
• Results oriented, with a high level of integrity and dependability.
• Prior knowledge in qPCR, molecular diagnostics, and next generation sequencing, technology and techniques would be an advantage.

This position is based in Singapore.

We appreciate your interest in the above-mentioned position, however, due to overwhelming response, only shortlisted candidates will be contacted.

Salary: $2400-$2800+allowances+OT=>$3300

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist HOD-QA for handling customer complaints and compile reports and follow-up on closures.
• Create OGP Smart Scope / CMM programs and support QA Manager
• Ad-hoc duties

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368