Job Description:

• Familiar with HVAC offshore / marine regulations and rules, such as, SOLAS, ABS, DNV, NORSOK, ASHRAE, ISO 7547, 8861 etc.
• Preparation of cooling load calculation, ventilation system design, air conditioning design, pressure drop calculation, duct sizing, grille/diffuser sizing, material take off etc.
• Responsible for HVAC equipment sizing and selection.
• Preparation of P&ID, D&ID and ducting layout drawings etc.
• Preparation of electrical single line diagram, cable block diagram, control diagram, termination diagram, electrical load calculation HVAC system logic diagram, HVAC Cable schedule etc.
• Ensure the HVAC system design and equipment selection are compliance with client specification, class regulation and hazardous area classification.
• Submission of HVAC/Architectural Design document and drawings for class approval.
• Technical submission (drawings and document) checking and revision control.
• Preparation of technical specification, technical bid evaluations.
• Interface with other disciplines and provide necessary guidance on HVAC/Architectural installation.
• Technical Clarification with Client and Vendor.
• Involved actively and monitoring the engineering, procurement, construction and commissioning HVAC system and architectural work.
• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works.
• Instruct supervisors/foreman on a day-to-day basis for work progress.
• Liaise with representatives, classification society surveyors and other to comply with inspection requirements.
• Resolve any technical problems or issues faced at work site.
• Monitors progress and instruct supervisors and foreman on safety and quality.
• Maintain the file copy of all latest revision drawings, approved procedures, client site instruction, project specifications, raised AFI and client signed reports for materialreceiving inspection and mechanical works for internal and external audits.
• Prepare Red-Line Mark-up as per site changes and submit to Engineering Dept to prepare as-built.

Job Requirement:

• Diploma/Degree in Mechanical Engineering
• At least 5 year experiences in Bolt Torque and Flange Management in Marine shipyard
• Experience in Marine HVAC installation and testing
• Experience in troubling shooting HVAC system and equipments

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned

Requirement:

• Bachelor’s Degree in Civil Engineering or equivalent
• Able to lead and work independently
• Proficient in Microsoft Office and AutoCAD
• Good communication skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Responsibilities:

To assist Operations Director in projects

Plan, organize, day-to-day operations for wastewater treatment plant and sludge dewatering plant

Provide technical support to operations & trouble-shooting for wastewater treatment and sludge dewatering plant equipment related problems

In charge of quality control and enforce operation compliance with regulations & other requirements

Liaises with clients, consultants, subcontractors, suppliers and government authorities on project-related issues

Review Project teamwork performance

Performs other duties as assigned

Requirements:

Candidate must possess Diploma in Chemical or Environmental Engineering

Working experience in Oil/Gas and Petrochemical Industries is preferred

Possess Driving Licence is preferred

Multi-tasking team player with excellent interpersonal and communications skills

Ensure that all works carried out are of highest quality standard to meet customer satisfaction.

Execute the site testing and commissioning activities of the company to the satisfaction of the owners and builders

Liaise with Yard’s commissioning personnel to close out issues which will affect the smooth completion of project

Ensure that Punch List are corrected and Test Memo and Service Acknowledgement Report are signed

Ensure that site issues are highlighted to the Production Manager/Assistant Production Manager in order to come up with proper and timely solution

Inform the project engineers in the event of changes on design, drawings and system operation which may arise during the job execution.

Highlight to Project Engineers any changes that may be required on supplied equipment for quality improvement.

Ensure that the equipment used for commissioning are calibrated and maintained in good working condition to achieve quality standard.

Ensure non-conformity report is being raised as and when necessary.

Ensure that non-conformances are promptly resolved by means of investigation and corrective action.

You will be leading the mechanical testing laboratory.

- Minimum of 5 years of working experience in mechanical testing.

- Familiarity with international standards related to mechanical testing.

- Ability to work independently and improve job productivity.

- Strong communication and negotiation skills to discuss terms and conditions and update clients on job status.

- Capability to secure new jobs and contracts from clients.

- Lead a team of technicians to ensure jobs are completed on time and meet quality standards.

- Manage regular audits conducted by clients and the Singapore Accreditation Council.

As a Service Engineer, you have to :

• Attend to equipment fault at customers’ premises.
• Liaise with the customer and sub-contractors regarding all aspect on the add-on project activities.
• Monitor the progress of the work done closely in order to ensure that the schedule and quality of work are met.
• Ensure that all materials and equipment are delivered on time as per schedule for site installation or rectification of fault.
• To carry out periodic maintenance for our customers.

You should :

• Possess a Diploma in Electronics and/or Electrical Engineering.
• 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc.
• With good interpersonal communication skills.
• Have a valid Class 3 license.
• Be ready for rotating stand-by duty.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory
• Be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Have the ability to oversee standard and/or routine technical problem solving activities and interact with customers on technical issues and questions
• Assist in the professional development of novice technicians and engineers within the local laboratory and works on well delineated technical issues including standard and routine analysis
• Carry out crucial examination and implementation of testing concepts and data and able to utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Has a clearly demonstrated ability to apply an array of testing techniques in a rational and practical style to help examine issues and build solutions.

Job Requirements:

• Possess a minimum Bachelor Degree of Science or Engineering major and 2 years of relevant working experience in a testing related field
• Possess a high level of expertise related to scope, core theories, concepts, terminologies and boundaries of chosen engineering discipline
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business
• In-depth understanding of testing concepts and compiles testing data from the tests performed

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Responsibilities

• Develop technical designs of roadworks and highways, traffic diversion schemes and delivery models according to different standards and requirements.
• Planning and supervising projects.
• Responsible for temporary traffic diversion scheme to suit construction progress.
• Coordination with relevant authorities for purpose of obtaining information and approvals.
• Preparation of Traffic Management Plan (TMP) for construction project.
• Preparation of tender documents and proposals.
• Preparation of Traffic Management Plan for road widening and viaduct construction project.
• Stakeholder management & liaising with different authorities.

Requirements

• Preferably with a Degree in Traffic Engineering and above or equivalent.
• Min 10 years experience in construction industry .
• Able to work as a team, assertive, independent, and proactive.

1. Manage the team of RTOs, supervision of site set up, earth works, drainage works and reinstatement works

2. Report to Qualified Person

3. Prepare weekly reports and monthly reports.

4. Attend the meeting with client and consultants

5. Report any non-compliances to Qualified Person

6. Ensure the site Safety

1. Undertake project management and product design works.

2. Provides customer support from product development to realisation.

3. Support cost study on machining and project works.

4. Handle all jigs and fixtures development works on machining jobs.

5. Represent company when dealing with subcontractors relating to hardware support.

6. Ensure safe operations and handling at all times

Performs site engineer responsibilities for

managing all aspects of the construction,

installation, maintenance, and repair of

electrical power lines, electrical systems,

fixtures, apparatus, and appliances.

This individual is responsible for planning,

scheduling, assigning, participating in, and

inspecting the works of power linesmen,

electricians, and trades helpers. The employee

also has responsibility for supervising the

operation of an electrical repair shop. Work

includes the design and construction of

special electrical apparatus and fixtures and

the preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and complex

jobs are normally inspected upon completion

for conformance with specifications; smaller

jobs are checked for satisfactory operation by

the users of the equipment. Work is

performed under general direction of an

administrative superior and is reviewed

through discussions and inspection of

completed work.

DUTIES AND RESPONSIBILITIES

Plans, assigns, schedules, and supervises the

work of power linesmen, electricians, and

helpers engaged in the construction,

installation, maintenance, and repair of university power lines, electrical systems, fixtures, apparatus, and appliances;

participates in the more difficult work.

Trains and instructs subordinates on detailed

procedures. Conducts periodic inspections and gives onsite

supervision over hazardous or unusual

work assignment is; assures availability of

equipment, materials, and supplies.

Estimates the time and material costs

required for projected jobs; keeps cost and

job records and submits reports; initiates

requisitions for supplies, tools, and

equipment. Troubleshooting of all Electrical &

ELVS PLC Knowledge preferred

Perform & Supervises the installation of all

Electrical & ELVS

Enforces safety regulations, rules, and working

conditions.

Recruits and trains personnel in the safe

operation of equipment and tools.

EDUCATION AND EXPERIENCE:-

Degree or Higher ; 4 years of related

experience including site engineer or lead

experience and considerable experience as a

Lead Site Engineer or any equivalent

combination of training and experience.

Excellent communication skills.

KNOWLEDGE, SKILLS AND ABILITIES:-

Thorough knowledge of the practices,

methods, equipment, materials, and tools of

the electrical trade.

Thorough knowledge of the occupational

hazards and safety precautions of the work.

Ability to supervise the work k of skilled

workers.

Considerable knowledge of the National

Electrical Code for electrical installations.

Ability to interpret and work from instructions,

pencilled plans and sketches, and blue prints.

Ability to communicate and coordinate with

superiors, subordinates, vendors and Ability to estimate materials and labour costs.

Skill in the use and care of all hand and shop

tools and equipment of the electrician's trade.

Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Retrofit Engineer

Do you enjoy being part of team that provides high-quality services for our customers?

Would you like to be in a team delivering world class service to our customers?

Be part of a successful Customer Service team

Baker Hughes Valves is a global technology company that designs, develops and manufactures the highest quality, most accurate and reliable control valves and safety valves products, services and solutions to our customers across a large range of process industries.

Partner with the best

As a Retrofit Engineer, you will be in charge of BoM and technical support for Pressure Safety Valves (Consolidated) and Control Valves (Masoneilan). You will also provide a global engineering support focused on Channel Partners and Aftermarket Centers for the selection, repair, maintenance, and replacement of Masoneilan and Consolidated products.

As a Retrofit Engineer, you will be responsible for:

• Executing design and analysis of assigned projects to develop valves meeting customer application needs, specification requirements, complying with local design/product standards.
• Reviewing customer specifications and “translating” customer specification in to order instructions for manufacturing of valves.
• Providing Retrofit solutions, with bills of material, drawing information, test specifications and processing instructions to meet quality and manufacturing requirements.
• Creating the design review process, ensuring accuracy, quality and design for manufacturability goals are met.
• Enabling the use of design tools (like 2D / 3D CAD (SolidWorks / ProE / UG), Excel, and in-house design calculations.
• Engaging with sales to support the quotation activities.
• Identifying, Own and Enable such initiatives which are in line with business objectives.

Fuel your passion

To be successful in this role you will:

• Have a Bachelor's in Mechanical Engineering (or) Equivalent from an accredited uni or college.
• Have a minimum 12-15 yr of experience in an Engineering Design / Analysis /Scientific / Technical Position.
• Have at least 7 yr of Control Valve and/or Safety valve Design Expertise.
• Demonstrate effective communication and interpersonal skills with the ability to work as a team.
• Have knowledge of control valve and/or safety valves including instrumentation and actuator.
• Have good understanding and experience in Valves regarding applications, Material of Construction, Non-Destructive Tests.
• Have experience with ASME B16.34 and PED, 3D design (Solid works/Ansys), mechanical design & tech writing.
• Have basic knowledge of manufacturing processes such as casting, machining, welding or cutting etc.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

Site engineers work chiefly on construction projects. They form part of construction management and use their skills and expertise to guide crew members and ensure the successful completion of a project. Site Engineers frequently liaise with clients and negotiate with vendors and suppliers to secure the best deals.

SINOTCC, an Engineering, Procurement and Construction (EPC) firm specializing in PROCESS and GENERAL CONSTRUCTION, is looking for a suitable candidate to fill up the role.

- Bachelor Degree in Engineering (major in HVAC, Mechanical, Electrical, Instrumentation).

- At least 5 years experience working in the Process & Construction Industry

- Independent, hardworking and self-motivated

- Willing to travel overseas (if needed)

- Willing to work over time

- 5.5 days work week

- Salary Negotiable

Location of Work : Jurong Island

The Resident Engineer shall be the Customer’s main point of contact on site in relation to the Long-Term Service Agreement (LTSA) and shall act as a technical representative of Mitsubishi Power (MPW) in relation to operation and maintenance of the Gas Turbine Combined Cycle (GTCC) Power Plant located in Jurong Island, Singapore.

The Resident Engineer needs to have strong technical knowledge in Gas Turbine Combined Cycle Power Plant. The role requires analyzing operational data to investigate various operation problems on turbines and auxiliary systems, trouble shooting a diverse range of problems that occur during operation and/or maintenance. With the support from the Singapore office and the Service Engineering Head Office in Japan, the Resident Engineer needs to be capable of providing solutions on an urgent basis.

The Resident Engineer must have experience completing Gas Turbine Combined Cycle Power Plant outages successfully and know how to coordinate with various internal stakeholders, vendors, technical advisors and local labour. The Resident Engineer must establish and maintain good working relationships with the Customer, ensuring that the customer’s technical issues and requirements are understood and addressed in an effective and timely manner.

The Resident Engineer shall be stationed at the site in Jurong Island during normal working hours (8 hours per day, 5 days per week, excluding public holidays), and at times when there is a substantial risk of Power Train operation interruption due to problems arising from the Power Train. As the Power Plant provides essential services, in the event of an emergency, the Resident Engineer shall be required to reach the Power Plant within specific required timeframe based on the service agreement with the customer, upon activation by the Customer to support the efficient recovery of the power plant.

Technical Support

The Resident Engineer shall act as the Customer’s interface for the flow of information to and from the Singapore office and Service Engineering Head Office in Japan. Such activities include but are not limited to:

· Establishing and maintaining good working relationships with the Customer, ensuring that the customer’s technical issues and requirements are understood and addressed in an effective and timely manner.

· Responding to and resolving internal and external customer requests for technical issues concerning relevant operation and maintenance matters of the GTCC Power Plant, making use of technical product knowledge and analytical skills while adhering to sound engineering principles, standards, practices and procedures.

· Communicating with and supporting the Customer to act on Technical Information notices to improve or upgrade the plant.

· Proactively identifying potential failures, assessing and controlling operational risks with support from the 24/7 remote monitoring hub and expert support

· Proactively advising and assisting the Customer in planning and executing relevant maintenance activities and coordinating with the Customer and MPW for the preparation of planned and unplanned inspection activities.

· Analyzing, tracking and reporting monthly Reliability, Availability, and Maintainability (RAM) data and relevant KPIs for the LTSA, for the purposes of invoicing and for monitoring performance · against the contractual guarantees and obligations. If necessary, recommend corrective actions.

· Reviewing and presenting the monthly monitoring diagnostic reports to the Customer.

· Reviewing and presenting the inspection findings and outage reports to the Customer.

Maintenance Work Coordination

The Resident Engineer shall be responsible for coordinating all activities provided by MPW under the LTSA, including but not limited to:

· Collaborating with the Customer, various MPW group resources (E.g. LTSA Program Manager, Technical Advisors, Field Services, Engineering) and Local Vendors (E.g. Labour, Onsite Machining, Local Workshop or other Third Party Services) in order to achieve the common goals with the Customer including but not limiting to health and safety, environmental protection, customer satisfaction, unit availability, reliability, performance and emissions

· Presenting and discussing with the Customer the scope and the planning of Planned/ Unplanned Maintenance

· Actively contributing in maintenance planning meetings, pre-outage and post-outage meetings between the Customer and MPW, confirming repair status with Repair Facilities.

· Supporting the Customer in the selection of spare parts to be kept on stock, aiming to increase the timely availability of necessary spare parts while optimizing inventory costs.

· Helping the Customer in selecting tools and equipment required for maintenance of the Covered Equipment.

· Coordinating dispatch of Parts and Technical Advisory Services

Troubleshooting/ Failure Investigations

The Resident Engineer shall be responsible to lead and/or support the troubleshooting of a diverse range of problems that may occur during Plant operation and/or Planned or Unplanned Maintenance, with the support from the Singapore office and Service Engineering Head Office in Japan. Such activities may include but are not limited to:

· Conducting fact-finding and communicating failure data between the Customer and MPW

· Analyzing operational data to investigate various operation problems on the Power Train and Auxiliary systems and suggesting necessary actions.

· Leading or supporting root cause analysis to determine the original cause of failures that led to plant trips or unplanned maintenance.

· Investigating problems that have occurred during maintenance works and be capable of providing solutions on urgent basis.

· Summarizing findings and conclusions in clear, logical and easily understood reports for external customers or internal departments.

Pre-requisites

Education level and relevant experiences

· Diploma/Degree in a relevant engineering or technical field

· More than 10 years of proven related work experience in the Power Industry

· Previous site work experience in Long Term Service Agreements, field service or maintenance and overhaul of CCGT power plants or industrial plants rotating equipment is preferable.

· Previous customer facing experience where there is regular interaction with plant personnel to provide support and resolve problems.

Knowledge and skills

· Knowledge of Gas Turbine Combined Cycle Power Plant Equipment operations and maintenance.

· Good communication skills.

· Able to develop and write clear and concise technical instructions, reports, specifications and recommendations.

· Able to work in a multidisciplinary team with people from different cultures and nationalities.

· Good Knowledge of MS Office software (Word, Excel & PowerPoint)

· Industry standard training courses on NDT, Machinery Diagnostics, Lubrication, Automation, Quality Control, Metrology would be an added advantage.

Company Introduction

SepPure Technologies is a CleanTech company revolutionizing energy-intensive chemical separation processes through the application of novel membrane materials and processes. We are passionate about making a positive impact on the world through sustainable technology. Our chemical-resistant nanofiltration membranes are disrupting traditional chemical separation processes, such as distillation and evaporation, reducing global energy use, emissions, and pollution. With up to 15% of the world's total energy spent on industrial-scale chemical separations, SEPPURE's sustainable process is a game changer. We are currently working on transformative projects in the edible oil, pharmaceutical, semiconductor, solvents, and fine-chemical industries. If you enjoy working in an innovative environment and want to be part of creating a sustainable future through CleanTech innovation, we have a great opportunity for you.

Job Description

SepPure Technologies is seeking a dedicated and detail-oriented Research Engineer to join our Applications Team in Singapore. The Research Engineer will work closely with the team to develop flatsheet and hollow fibre membranes for organic solvent nanofiltration applications. The Research Engineer will also be required to plan and conduct experiments to evaluate the performance of membranes, based on robust engineering and scientific techniques. The Research Engineer may also be required to assist in the evaluation of data and provide recommendations for membrane development.

Key Responsibilities

Membrane research and development

• Keep up-to-date with latest membrane technology development
• Support the development of dope formulation for membrane fabrication
• Modify processes to improve membrane performance
• Develop methods for membrane characterisation and performance evaluation
• Ensure high repeatability for experiments and data collection
• Maintain documentation and databases for research and development

Qualifications

Must have:

1. B.Sc in chemical engineering or related fields
2. Good understanding of polymer chemistry, design of experiment, data analysis and process troubleshooting
3. Good problem-solving skills
4. Team player with strong communication skills

Good to have:

1. Working experience in developing hollow fiber or flat sheet membranes

Worked in a lab environment.

• Attend to Client’s site surveys, meetings and maintain constant contact/communication regarding project works (In progress and new)
• Work closely with the drafting department to come out with preliminary design (for client’s approval), material take off and cost estimation for the new potential projects
• Carry out cost estimation and prepare quotation for clients
• Overall in charge of project’s delivery schedule, cost control, quality and safety (i.e. ensure that projects are carried out within budget, schedule and with zero rework and safety incident)
• Prepare Risk Assessment for Clients review and approval prior to work start
• Check and ensure proper documentation (such as test packages, as-built drawings etc) are in place prior to project close up
• Ensure overall safety well being of workers in the workshop as well as the on site during project execution
• Attend and participate all Safety Meetings organized by Clients

As a Project Engineer specializing in interior works, you will play a pivotal role in the planning, execution, and completion of our projects. Working closely with our project managers, you will oversee all aspects of construction, ensuring adherence to timelines, budgets, and quality standards. This is an excellent opportunity for a talented individual to make a significant impact in the dynamic field of construction engineering.

Key Responsibilities:

• Collaborate with project managers to develop project plans, schedules, and budgets for Interior Projects.
• Conduct thorough site assessments and surveys to identify potential challenges and ensure compliance with regulatory requirements.
• Coordinate with architects, engineers, subcontractors, and suppliers to facilitate the timely procurement of materials and resources.
• Manage day-to-day construction activities, including site logistics, safety protocols, and quality control measures.
• Monitor project progress and performance, identifying and addressing deviations from plans and specifications.
• Provide technical expertise and problem-solving support to resolve construction-related issues effectively.
• Prepare and review engineering drawings, specifications, and documentation to ensure accuracy and completeness.
• Foster a culture of teamwork, innovation, and continuous improvement among project team members.

Qualifications:

• Bachelor's degree in Mechanical Engineering or a related field.
• Strong understanding of construction principles, practices, and techniques.
• Excellent communication, leadership, and interpersonal skills.
• Immediate availability will be preferred

Big Data Developer (3 – 10 Years)
§ Good understanding of concurrent software systems and building them in a way that is scalable, maintainable, and robust
§ Experience in designing application solutions in hadoop ecosystem
§ Deep understanding of the concepts in Hive, HDFS, yarn, Spark, Spark sql, Scala and Pyspark
§ HDFS file formats and their use cases (eg Parquet, ORC, Sequence etc)
§ Good knowledge in data warehousing system
§ Experienced in any scripting language (SHELL, PYTHON)
§ HortonWorks distribution and understanding on SQL engines (Tez, MR)
§ Java/RestServices/Maven experience is a value addition
§ Control-M development. Monitoring Resource utilization using Grafana Tool
§ Good skillset to create automation scripts in Jenkins & knowledge in working on automating builds, test frameworks, app configuration etc
§ Experience in implementing scalable applications with fully automated deployment and control using Bitbucket, Jenkins, ADO etc
§ Skillset:
o Mandatory: Big Data – Hive, HDFS, Spark, Scala, Pyspark.
o Good to have : Schedulers (Control-M), ETL Tool – Dataiku , Unix/Shell scripting , Knowledge of Integration services of FileIT/MQ and others , CI/CD tools – Jenkins, Jira, ADO Devops – tools suite , Oracle .

JD:
Big Data Developer (3 – 10 Years)
§ Good understanding of concurrent software systems and building them in a way that is scalable, maintainable, and robust
§ Experience in designing application solutions in hadoop ecosystem
§ Deep understanding of the concepts in Hive, HDFS, yarn, Spark, Spark sql, Scala and Pyspark
§ HDFS file formats and their use cases (eg Parquet, ORC, Sequence etc)
§ Good knowledge in data warehousing system
§ Experienced in any scripting language (SHELL, PYTHON)
§ HortonWorks distribution and understanding on SQL engines (Tez, MR)
§ Java/RestServices/Maven experience is a value addition
§ Control-M development. Monitoring Resource utilization using Grafana Tool
§ Good skillset to create automation scripts in Jenkins & knowledge in working on automating builds, test frameworks, app configuration etc
§ Experience in implementing scalable applications with fully automated deployment and control using Bitbucket, Jenkins, ADO etc
§ Skillset:
o Mandatory: Big Data – Hive, HDFS, Spark, Scala, Pyspark.
o Good to have : Schedulers (Control-M), ETL Tool – Dataiku , Unix/Shell scripting , Knowledge of Integration services of FileIT/MQ and others , CI/CD tools – Jenkins, Jira, ADO Devops – tools suite , Oracle .

PROJECT ENGINEER will be under service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.Working in workshop and vessels.
Good communication skills with Ship Owners and Superindents.
Good time Management and work Independently.
To perform any other duties & Responsibilities assigned by superiors from time to time.
Ability to demonstrate and implement cost -saving measures.
Ability to lead to manage project operations, schedule and specifications.
Requirements:- Min 5 Years experience .- Knowledge of MS office.- Able to work OT.- Excellent coordination skills.-

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

Job Responsibilities:

• Responsible for liaising with Engineering team on technical drawings, layout and clients specifications, clarifying system isometric drawings, equipment foundation drawings, drawing of parts, material lists and additional drawings for production support
• Prepares planned schedule for logistic and manpower arrangements under the supervision of senior team members and responsible for the product hierachy in outfitting installation
• Performs supervision on site to ensure outfitting installation work have been safely and appropriately executed according to the arrangement and coordination plans and sequence in outfitting production
• Coordinates with other production team members, subcontractors and consultants to resolve technical issues on-site which affect the outfitting schedule and project deliverables
• Liaises with QA/QC, owners, statutory and classification authorities for completed outfitting installation inspection and acceptance (i.e.piping systems, HVAC, electrical cabling, fitting equipment and equipment foundation) to sign off completion
• Performs on-site checks on the recorded checklists, ensuring the information is accurate and generates reports on work progress for senior team members’ review
• Maintains a high level of efficiency, ensuring good housekeeping, resource optimisation and effective material management to continuously improve the execution of outfitting scope of work
• Continually improves and implements safe work environment, efficient and effective methods for reducing project man-hours, costs and improving schedule
• Identifies, trouble-shoots problems and performs root cause analysis study on recurring cases of defects by resolving to corrective and preventive measures to improve process performance
• Works with other Production team members as required to achieve functional objectives and deadlines
• Provides support in various projects as required to promote cross-functional learning and development, balance team workload and enhance overall team productivity
• Incorporates HSEQ work cultures and best practices to ensure the successful implementation of HSEQ management systems
• Maintains and executes HSEQ procedures, policies and programmes and drives continuous improvement through risk-based thinking and analysis
• Supports the conduct of HSEQ management system audits to ensure compliance with legislations and company policies

Job Requirements:

· Bachelor’s degree in Marine/ Mechanical Engineering, or related engineering disciplines

· 3 years of working experience in planning and construction of outfitting scope of work in the oil and gas industry

· Experience in engineering outfitting activities in marine engineering projects

· Excellent proficiency in English (written and spoken)

· Knowledge and experience in the interpretation of outfitting diagrams, general mechanical drawings and its elements to deliver class approved documents and drawings

· Knowledge of engineering analysis techniques and tools/software applications (i.e.3D modeling software such as Cadmatic or Aveva Marine etc.)

· Familiar with material and equipments (i.e.main engine, generator, pump, deck machinery, mooring equipment, switchboard, etc.) used in outfitting design

· Some knowledge and experience in site inspection standards, class rules requirements and industry codes

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.