Job Description:

• Design FA project inclusive of tooling, artwork, material and process.
• Draft drawing for making of tooling and artwork.
• Liaise with suppliers regarding the making of tooling and artwork.
• Create job ticket which consists of material and process.
• Co-ordinate FA run with FA report submission
• Co-ordinate product transfer from US to Singapore facility.
• Develop and fabricate test jig/tool for testing of functionality of finish product.
• Maintain all test jig/ tool used in production.
• Perform product failure analysis, as well as reduce cost through yield improvement, cycle time reduction and process enhancement.
• Coordinate the Engineering Change Notice (ECN) process.
• Putting up sales quotation for the customer through the sales department.
• Any other task assigned

Requirements:

• Diploma in Electrical / Electronics / Mechanical or Microelectronics Engineering.
• Knowledge of 3D modeling software such as Pro/Engineer and AutoCAD.
• Need to be flexible on working hours as support over the weekends may be required.
• Must be a self-motivated team player with good presentation and communication skills
• Good project and time management capabilities

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills

Job Description

· Responsible for ensuring that assigned projects meet customer’s specs, strictly follow procedures and schedules

· Communicate and coordinate effectively with all relevant internal & external team members including contractors to ensure efficient completion of projects

· Review work procedures and highlight activities which may cause interruptions on the projects

· Closely supervise all contractors to execute tools services hook-up activities, ensure safety regulations practiced and monitor work quality performance

· Maintaining and modifying equipment to ensure that it is safe, reliable and efficient

· Liaise with clients on services requirement, schedule, reports and progress claims

· All other ad-hoc assignments assigned by Project Manager

Qualification

· Degree /Diploma in Mechanical Engineering

· At least 2 years of working experience

· Proficiency in Microsoft Project and Microsoft office and AutoCAD

· Highly analytical, meticulous, proactive and self-driven

· Strong team-player with excellent interpersonal and communication skills

· Able to work under pressure and in fast-paced environment

· Able to work collaboratively with others

· Able to start immediately

· Able to read and interpret P&ID.

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

Job description

• Support agency in new cloud related projects implementation.

• Assist agency in reviewing access rights, and accounts control in cloud.

• Review and resolve the vulnerabilities reported from scan and/or alerts.

• Provide consultancy to new projects to onboard AWS cloud services.

• Strengthen the security posture of existing cloud infrastructure and propose enhancement.

• Raise service request to BAU Operations Team for in-scope cloud related tasks.

• To support and maintain AWS S3 Buckets and other AWS Storage services such as FSX.

• To support Trend Micro Cloud One Workload and Endpoint Security / AMHIPS as part of Agency Anti-Virus/ Anti-Malware system.

• To support and maintain ABLR Heavy Forwarder as part of Agency Audit Logging requirement.

• To support Agency Infrastructure using DevOps process or tools such as Terraform or AWS CloudFormation.

• To support Audit and security compliance activities.

• Work with BAU team, System Engineers, Cloud Engineers, and DBA to support and maintain agency environment.

• To support and maintain Central Account Management (CAM) servers as part of Agency Audit requirement.

• To support Disaster Recovery exercises.

• Possessing Cloud certifications is preferred.

If no relevant certification, a minimum of 4 years working experience in the IT field and at least 2 years working experience in a cloud environment will be required.

Job Responsibilities:

• To coordinate with customers and sub contractors on maintenance and upgrading works.
• To prepare sales quotations, service orders and breakdown reports.
• To visit customers to gain their feedback.

Job Requirements:

• Diploma in Electrical, Electronics or Mechanical Engineering.
• Preferably 3 years of relevant working experience.
• Work experience in Lift/Escalator/Service/Project/Building industry preferred.
• Good communication skills.
• Only Singaporean need to apply

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

Element has an opportunity for a Sales Engineer. In this role you will be an inside seller, responsible for establishing and maintaining strong relationships with a defined group of Element clients and prospects.

You will expand business with dormant and existing accounts, provide increased touch points for accounts, and is budget responsible for 200+ growth and retention clients. It will be your responsibility to assure customer satisfaction through all stages of the sales process. In addition to client relations, this role will interact with the broader Element Sales Team, General Manager, and lab/technical personnel. The ideal candidate will be action oriented, customer focused and have an entrepreneurial drive.

Job Duties:

• Establish and proactively maintain a strong professional relationship with key decision makers and influencers within assigned accounts
• Identify current and future customer service requirements by establishing personal rapport with potential and actual customers, acting as a liaison between the customers and Element
• Identify opportunities early in the sales cycle to ensure maximum share of wallet for Element
• Qualify opportunities with assistance of inbound team / specialists
• Manage relationships and utilize technical support to assist in Sales
• Follow up in a timely manner on quotations for the assigned customer base
• Actively utilize CRM to record activities, ensuring contact details are accurate, duplicates are removed, new information is added and accurate call / visit logs are entered
• Actively participate in regular pipeline reviews, ensuring all CRM records are up to date and critical success factors are identified for key opportunities
• Achieve sales goals by converting and penetrating accounts
• Build and maintain a working knowledge of Element’s service offerings; participate in training/coaching opportunities
• Ensure compliance with all Element policies including but not limited to terms and conditions, trade compliance, treatment of others, moral code of conduct, and employee handbook
• Ensure adherence to all applicable laws pertaining to safety, environment and corporate governance

Job Requirements:

• Approximately 3 years of Business Development, Sales or Account Management experience
• Ability to read and interpret documents such as customer quotes / contracts, marketing materials, and customer testing specifications
• Ability to write routine reports and correspondence and speak effectively before groups of customers or employees of organization
• Ability to calculate figures and amounts such as discounts, interest, commissions and proportions and apply concepts of basic algebra and geometry
• Ability to solve practical customer problems and interpret a variety of instructions, data and details furnished in written, oral, diagram, or schedule form
• A valid driver’s licence, with an acceptable driving record under Element’s policy
• Experience in interpreting testing procedures and requirements desired
• Proficiency in Microsoft Applications (Word, Excel)
• Availability, flexibility, and maturity to represent the company at a broad range of events / projects in the community, with customers and within the company
• Ability to remain calm when faced with mounting pressure related to deadlines and multiple priorities
• Well-developed oral and written communication skills to meet a variety of communication needs
• Good interpersonal skills that foster open upward and downward communication built on mutual respect
• Ability to interface with clients, win new work and determine their requirements; helps develops proposals including cost estimates, work plan and terms and conditions
• Some overnight travel may be required

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Description:

• Familiarization of ASME / API Codes & Standards, DNV Rules
• Proven experience of providing solutions on NDT inspection related problems
• Responsible for company NDT management and controls
• Responsible for trouble shot problems related to NDT
• Provide internal training technical guidance to QC Inspectors
• Develop/Review/approve NDT procedures, NDT techniques complying with project/code/regulatory requirements. Review NDT procedures prepared by NDT sub-contractor as per project specification prior to submitting for client approval
• Monitor the performance of NDT personnel through system of review of qualification, competency assessment, Cross checks and reports review
• Risk assessment of NDT works and lead the risk assessment process of NDT in the yard
• Prepare and conduct Project Specific Inductions/workshops/tool/box talk about NDT requirements
• Co-ordinate with NDT contractors to develop and update their individual competency matrix
• Maintain all NDT personnel qualification records and update from time to time.
• Keep a copy of all NDT contractors’ certificates
• Review NDT operator qualification and submit for project approval
• Establish calibration and validation blocks required to demonstrate Ultrasonic Testing
• Perform Audit on NDT contractors to ensure compliance with project requirements
• Witness & provide technical guidance on standard PAUT validations
• Provide technical support for inspection auditing activities and provide effective audit programming for companywide NDT activities
• Reviewing and commenting on standards, specifications, and enquiries
• Work as part of a team to ensure all regulatory, quality and customer requirements are met
• Verify NDT reports for project requirements compliance
• Creative problem solving - able to suggest and develop new methods and ways of working
• Sound communication skills – able to communicate ideas and results to various stakeholders both in written reports and in meetings, presentations etc
• Understanding of clients’ needs and ability to suggest and apply “fit for purpose” solutions
• Willingness to be flexible and multi-task as part of a team, and contribute to company objectives

Job Requirement:

• Bachelor’s degree in Mechanical Engineering / Master Degree in NDT
• Minimum 5 years experience in fabrication environment as NDT Level III
• ASNT/PCN Level III qualification in UT/RT/MT/PT/ CSWIP (PAUT)

Position Summary

• Able to do engineering and design for Fire and Gas detection and suppression systems in accordance with international standards (e.g. NFPA) and project specifications.
• Provides daily technical support to instrument and electrical technicians and supervisors during installation.

Tasks and Responsibilities

• Involved in Fire Alarm Detection System Design and installation.
• Involved in Gas Detection Design and installation.
• Involved in Fire Suppression design and installation.
• Involved in preparing Intrinsically Safe calculation for Instruments.
• Involved in HVAC design control philosophy and instrumentation
• Involved in preparing mapping list for interface to customer.
• Involved in preparing bill of materials and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting.

Job Requirements

• Good communication skills in English both written & spoken.
• Must know basic fire alarm detection system.
• Must know gas detection system.
• Must know HVAC instrumentation.
• Must know PLC logic.
• Have knowledge in basic electrical design.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Willing to travel to Batam

Job Duties:

• Maintain 5S & Safety in Laboratory, plan and deliver services to meet the local and regional business plan objectives
• Technical report preparation and authorization and provide technical and engineering leadership, and supports the development of new technologies within a local laboratory
• Provide onsite project leadership and testing execution while ensuring development and training of junior staff
• Be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing, possess the ability to oversee standard and/or routine technical problem solving activities and able to interact with customers on technical issues and questions
• Provide Input and support on business development opportunities with new or existing customers and be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory
• Carry out crucial examination and implementation of testing concepts and data, utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions
• Ensure that tests assigned to the technicians are performed in a timely manner in accordance with validated test protocols and procedures; give training to the technicians as required, upkeep test reports and related records and ensure equipment and testing meets the requirement of ISO/IEC 17025
• Maintain and upkeep test facilities and laboratory equipment, assist with hazard identification and risk assessment exercises within their areas of responsibility and monitor day-to-day health and safety in their section of responsibility and ensure all hazards, near misses and accidents are reported

Job Requirements:

• Working knowledge of laboratory safety
• Possess a Degree in Civil Engineering or Materials Engineering major or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic / professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

We are seeking a highly skilled and motivated Service Engineer to join our team. The ideal candidate will be responsible for providing technical expertise, performing maintenance, and delivering support services to ensure the efficient operation of equipment and systems.

• Designing and developing electrical systems for marine vessels
• ⁠Installing and commissioning electrical systems on ships
• Supervising the work of marine engine technicians
• Inspecting and testing electrical systems and equipment
• Maintaining and repairing electrical systems and equipment
• Designing tray routes and electrical panel positions
• Creating single-line diagrams of lighting and other electrical panels
• ⁠Supervising the installation, cabling, and termination of electrical equipment
• Independently testing and Commissioning electrical panels
• Presenting surveys of electrical systems to relevant authorities

Endress+Hauser is a global leader in measurement instrumentation, services, and solutions for industrial process engineering. We provide process solutions for flow, level, pressure, analytics, temperature, recording and digital communications, optimizing processes in terms of economic efficiency, safety & environmental impact.

Our customers come from various industries, including chemical, food & beverage, life sciences, power & energy, mining, minerals & metals, oil & gas, and water & wastewater. Although we employed close to 16,000 individuals worldwide, we remain a family-owned company and family-owned companies are different. We believe that competent and motivated employees are the crucial factor for future success.

Become part of our team and write the next chapter in this success story with a career at Endress+Hauser, "Driving Progress Together".

Key Responsibility

• To work closely with sales, service, and industry managers in a team approach to serving customers. To perform out-door sales activities to achieve the agreed sales targets.
• To promote and develop existing customers in Singapore for Endress+Hauser products, services and solutions in the industries assigned to your team.
• To provide customer service, build and maintain good customer relations, solve problems, attend to complaints, and provide effective customer support, to achieve the best customer experience from end-to-end.
• To develop sound customer relationships at all levels and keep the accounts plan and forecast regularly updated in Salesforce Lightning CRM.
• To work closely with colleagues internationally, joining our global network to ensure the best of service to our customers and to be an active participant in Kaizen and Lean projects.
• To respond to and follow up on customer enquiries and specifications for products and systems or packages based on E+H products, services and third-party suppliers and pass on clear instruction to Internal Sales Engineer to prepare quotations and proposals in SAP, in a timely manner.
• To be responsible for sales functions, like customer visits, product demonstration, negotiations, complaint handling, providing technical assistance and advice, following up of quotations, closing orders and customer liaison.
• To assist in marketing activities, like exhibitions, seminars, presentations, direct mailing, etc.
• To assist service department in satisfying customers’ after-sales and commissioning service requirements, where applicable.
• To execute agreed strategic plans in an organized way.
• To promote digital sales and meet/exceed assigned targets.
• To be always polite and customer oriented

Requirements

• Diploma in Electrical engineering or its equivalent
• At least 3 years' relevant experience.
• Experience in Sales/Business Development, Project Management or Engineering related industry
• Proven sales records of achieving sales target.
• Knowledge of SAP and Salesforce will be an advantage

1. Design and Planning

• Review and interpret electrical designs, blueprints, and technical drawings.
• Coordinate with design engineers, architects, and other stakeholders to ensure that electrical plans align with project requirements.
• Propose modifications or improvements to electrical systems to enhance efficiency or safety.

2. Installation and Supervision

• Oversee the installation of electrical systems, equipment, and fixtures, ensuring compliance with standards and specifications.
• Supervise electricians, technicians, and subcontractors to ensure proper execution of tasks.
• Plan and allocate resources, including manpower, tools, and materials.

3. Quality Assurance and Compliance

• Ensure that all electrical work complies with local codes, standards, and regulations (e.g., NEC, IEC).
• Conduct regular inspections and audits to ensure quality and adherence to safety protocols.
• Test and commission electrical systems to confirm functionality and performance.

4. Troubleshooting and Maintenance

• Identify and resolve issues with electrical systems during installation or operation.
• Develop and implement preventive maintenance schedules for electrical equipment.
• Prepare troubleshooting guides and provide technical support as needed.

5. Safety Management

• Enforce safety protocols and ensure the use of appropriate Personal Protective Equipment (PPE).
• Conduct risk assessments to identify and mitigate hazards related to electrical works.
• Train staff on electrical safety and emergency response procedures.

6. Documentation and Reporting

• Maintain detailed records of electrical installations, inspections, and maintenance activities.
• Prepare daily progress reports, test reports, and as-built documentation.
• Report project progress and issues to the project manager or higher management.

7. Budget and Cost Control

• Estimate costs for electrical components and systems.
• Monitor project expenditures to ensure that electrical work stays within the budget.
• Suggest cost-effective solutions without compromising quality or safety.

8. Coordination and Communication

• Collaborate with other engineering disciplines to integrate electrical systems into the overall project.
• Communicate effectively with stakeholders, including clients, contractors, and suppliers.
• Attend project meetings and provide updates on electrical works.

9. Problem-Solving and Innovation

• Propose innovative solutions to overcome challenges during project execution.
• Stay updated on advancements in electrical engineering and incorporate new technologies where applicable.

Are you a motivated and enthusiastic professional with exceptional programming skills? Join our dynamic and innovative team in Singapore as a Project Engineer!

At our fast-growing company, you'll enjoy an exciting career in a cutting-edge technology environment and benefit from a highly competitive salary.

If you're ready to elevate your career and make an impact, we'd love to hear from you. Apply now and become part of our journey to shape the future!

Job Scopes

• Site coordination, project schedule planning, coordinate site works with subcontractor
• Design and deploy HVAC controlling and building automation system.
• Project Management and attend project meeting.
• Provide training to customers.
• Provide testing and commissioning services
• Prepare and submit operations and maintenance manuals
• Projects management and implementation and troubleshooting

Requirements

• Strong protocol Knowlagent for Modbus/BACnet/OPC and etc
• Familiar with HVAC controlling and building automation system.
• Knowledge on HVAC, power meter, PLC and SCADA
• Strong troubleshooting skill
• Strong analytical mind
• Self-motivated and team player
• At least 1 Year(s) of working experience in the related field is required for this position.

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

We seek a highly skilled and experienced Facility Engineer to oversee the maintenance and operations of our facilities. You will play a crucial role in ensuring functionality, safety, and compliance while leading our maintenance team. The ideal candidate will have a strong technical background in mechanical or electrical disciplines and extensive experience in facility management and supervision. Proficiency in English and Mandarin, along with excellent communication and negotiation skills, is essential for liaising with contractors, local authorities, and stakeholders.

RESPONSIBILITIES

· Oversee the maintenance and repair of facility systems, equipment, and infrastructure.

· Supervise contractors, including negotiating pricing, scheduling, and quality control.

· Ensure compliance with local codes, safety regulations, and environmental standards.

· Prepare reports on maintenance activities, budget expenditures, and project progress.

· Serve as the primary contact for local authorities, obtaining permits, and ensuring regulatory compliance.

· Develop and implement emergency response procedures.

· Lead and mentor the facility maintenance staff, providing guidance and training.

JOB REQUIREMENTS/QUALIFICATIONS:

· Diploma in Mechanical or Electrical discipline or certification in facility management.

· Minimum of 5-7 years of experience in facility management, with supervisory roles.

· Proficiency in English and Mandarin, with strong communication skills.

· Ability to write reports, plan schedules, negotiate prices, and supervise contractors.

· Familiarity with local codes, safety regulations, and environmental standards.

· Class 2 or 3 driving licence required for travel to various facilities.

ATTRIBUTES:

· Ability to lead and motivate teams, fostering accountability and teamwork.

· Strong analytical and problem-solving skills.

· Flexibility to adapt to changing priorities and deadlines.

· Meticulous attention to detail for accurate documentation and compliance.

· Excellent organisational skills to manage multiple tasks and projects.

· Clear and effective communication skills for conveying technical information.

JOB DESCRIPTION

• Manage projects from conception to completion, including planning, budgeting, and coordinating with cross-functional teams.
• Conduct thorough testing and inspection of mechanical systems to ensure they meet performance and safety standards.
• Provide technical support and expertise to production and maintenance teams, troubleshooting and resolving mechanical issues.
• Prepare detailed reports, technical drawings, and documentation for all projects and maintenance activities.

JOB REQUIREMENTS

• Diploma in Mechanical Engineering or in a related field.
• Must have minimum 2-3 years of electroplating experience
• Minimum 3 years experience in mechanical engineering, preferably in the Oil & Gas, Marine, or Industrial sectors.
• Proficiency in CAD software (e.g., AutoCAD, SolidWorks) and other engineering design tools.
• Strong analytical and problem-solving skills with the ability to troubleshoot problem.
• Excellent verbal and written communication skills.
• Ability to work collaboratively in a team environment, as well as independently when required.

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

(A) Primary Function

1. Responsible for all engineering related activities of the product line concerned.

2. Responsible for quality of products at all stages and drive production yield.

3. Identify and initiate actions to prevent occurrence and recurrence of product, process, quality systems nonconformities.

4. Work as a team with all departments to achieve mutual agreement on specification required by customers.

5. Ensure all products meet the standard cycle time and minimise machine and mold down time.

6. Implement improvement plans to enhance efficiency of process, material and manpower.

7. Responsible for new RFQ enquiry and advise the management the feasibilities for mass production.

8. Responsible for resolving discrepancies and technical issues related to product with customers.

(B) Duties and Responsibilities

1. Establish optimum process parameters and meeting specific cycle time for new product.

2. Analyze defect reported in-house and customer with quality, tooling and production.

3. Responsible to test and qualify all new molds by applying systematic molding that includes Load Senstivity Test, Viscosity/Shear Rate Test, Gate Freeze Test, Thermal Mapping of Mold, Short Short Test etc.

4. Must perform DOE on molding process parameter for process window study.

5. Attend to all daily quality and process related issues.

6.Prepare and execute process validation protocols and reports for new and existing products with tooling and quality personnel for all customers.

7. Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap.

8. Perform internal quality system audit.

9. Train and assess production staff on processes as well as WI as and when required.

10. Attend routine production and quality meetings.

11. Execute engineering change notice from customer/ in house and update ERP system promptly.

12. Compliance to all regulatory and in house system requirements especially for medical and automotive customers.

C) Qualifications / Requirements

1. Degree/Diploma in Engineering-related discipline, preferably in Polymer and Plastic technology, Mechanical.

2. At least 3 years related experience/knowledge in Plastic Injection Molding, preferably in medical and automotive industries.

3. Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA, PPAP, APQP and IOPQ.

4. Possess strong leadership, positive attitude, analytical and good interpersonal skills.

5. Results-oriented, meticulous and a self-motivated team player.

Service Engineer

We are at the heart of every place that matters: as a leading global provider in the access solutions market, we enable people to move seamlessly in safe, secure and sustainable places.

Do you want your work to matter? Then join our team!

At dormakaba, more than 16,000 people from all over the world work together and grow together. If you are looking for exciting career prospects, if you want to fuel innovation and like tackling new challenges, then we would love to hear from you!

Our Singapore Service team is always on the lookout for talents and help you reach your best potential!

Role & Responsibilities

· Provide customer support for our Company’s products such as handling their enquiries with tact and courtesy.

· Perform on-site advice, installation, preventive maintenance and repairs of our Company products.

· Offer aftersales solutions and training to customers on product features, configuration, usage and maintenance.

· Proactive in informing customers of additional product and services we offer.

· Handle all essential resources, materials and equipments for effective and efficient delivery.

Key Competencies

· Good level of customer service experience.

· Good communication skills to enable interaction with internal and external customers.

Qualification:

· NITEC/ Diploma in IT/Engineering/Electrical/Mechanical/Computer-related or equivalent discipline.

· Candidates without prior working experience are welcome as on-the-job training will be provided.

· Possess a valid Singapore Class 3 Driving License.

Benefits:

· Learning culture where every employee is engaged in learning and development growth.

· Team programs and activities that celebrate individual and team’s success.

· Long service award recognition for our committed and dedicated colleagues.

· Health insurance and flexi-benefits cater for the employee’s health and wellness.

Is this you? Access your career at dormakaba today!

Diversity, Equity & Inclusion is part of our overall business and sustainability strategy. We consider all applicants equally throughout the whole recruitment process without regard to culture, age, ethnicity, gender identity, disability, marital status, language, national origin, physical/ mental ability, religion, sexual orientation, socio-economic status, underrepresented communities, etc. We do not use unfair selection methods for any of our positions, all employees are appointed based on performance and suitability for the role

Roles & Responsibilities

Official working hours: 5 Days

Salary: Basic $3000 - $5000 plus Overtime

Working location: Tuas or Site

• To carry out inspection, troubleshooting & repair of marine equipment such as hatch cover, winches and crane on site.
• To carry overhauling of marine equipment or components in workshop, such as winches, cylinders , motor.

Requirements

We are looking for an experienced Hydraulic/Mechanical Service Engineer who capable to work in marine industry.

• Nitec, Diploma or Degree in Mechanical or Electrical Engineering or equivalent
• At least 1 years working experience in Mechanical, Hydraulic, Electrical, Marine, or heavy engineering Industry. Preferably with service and troubleshooting skill.
• Capable in mechanical and hydraulic and mechanical troubleshooting.
• Good coordination skill and capable to supervise repair team at shipyard and during vessel repair.
• Positive attitude and able to work under pressure to complete work within timeframe.
• Eager to learn and good team player.
• Capable to prepare service reports and able to communicate well with colleague, customer and contractor.
• Willing to work overtime and travel overseas for short period.

• Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement)
• Design systems and components that meet needs and requirements
• Produce outline designs
• Conduct experiments methodically, analyse data and interpret results
• Test and evaluate theoretical designs
• Identify, formulate and produce effective solutions to emerging problems
• Evaluate final product’s overall performance, reliability and safety
• Alter and modify design to meet requirements and to eliminate malfunctions
• Estimate budget and scope of project
• Solicit observations from operators
• Prepare product reports and documentation
• Engage in lifelong learning and develop new theories or methods

Job Duties:

• Maintain 5S & Safety in Laboratory, plan and deliver services to meet the local and regional business plan objectives
• Technical report preparation and authorization and provide technical and engineering leadership, and supports the development of new technologies within a local laboratory
• Provide onsite project leadership and testing execution while ensuring development and training of junior staff
• Be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing, possess the ability to oversee standard and/or routine technical problem solving activities and able to interact with customers on technical issues and questions
• Provide Input and support on business development opportunities with new or existing customers and be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory
• Carry out crucial examination and implementation of testing concepts and data, utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions
• Ensure that tests assigned to the technicians are performed in a timely manner in accordance with validated test protocols and procedures; give training to the technicians as required, upkeep test reports and related records and ensure equipment and testing meets the requirement of ISO/IEC 17025
• Maintain and upkeep test facilities and laboratory equipment, assist with hazard identification and risk assessment exercises within their areas of responsibility and monitor day-to-day health and safety in their section of responsibility and ensure all hazards, near misses and accidents are reported

Job Requirements:

• Working knowledge of laboratory safety
• Possess a Degree in Civil Engineering or Materials Engineering major or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic / professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. In this role, you will perform a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory and be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing and have the ability to oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide Input and support on business development opportunities with new or existing customers
• Be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory and carry out crucial examination and implementation of testing concepts and data
• Utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelor Degree in Materials Science, Materials Engineering or Civil Engineering
• Have a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business and working knowledge of laboratory safety
• In-depth understanding of testing concepts
• Can analyze and compiles testing data from the tests performed
• Possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.