• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Familiar with AUTOCAD Software.

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.

Job Responsibilities:

• Lead Process Engineering and design, process configuration and optimization studies
• Perform Process simulations, prepare Process/Utility Flow Diagrams, Heat and Material Balance, Utility Balance
• Create Piping and Instrumentation diagrams (P&IDs)
• Prepare datasheets for process equipment and instruments
• Conduct relief and blowdown studies, analyze relief load scenarios and calculate flare network requirements
• Perform process calculations for equipment sizing and line hydraulics
• Prepare Process design philosophies and operating guides

Job Requirements:

• Bachelor's Degree in Chemical Engineering
• At least 20 years of relevant engineering design experience
• Have worked on Concept studies, FEED and detailed design projects
• Good experience with Offshore Oil and Gas, and LNG terminal projects. Experience on Energy transition projects will be an advantage.
• Have led process teams on Hydrocarbon projects
• In-depth understanding of process design, heat and material balance and P&IDs
• Familiarity with international codes and standards, software and tools
• Candidates with Lead Engineer experience will be given preference

Civil Engineer (Project & Site coordination)

Civil constriction projects

Primary Role

Responsible for advanced Planning, designing, integrating, installation, rigging and lifting equipment, including management of contractors and vendors

Responsible for supervising and assessing the set-up of all project components, manage all aspects of an engineering project, prepare schedules, communicate with clients, project progress.

Key Activities

1. Oversee and regularly review engineering processes and resources to maximize efficiency and productivity
2. Develop plans for new engineering initiatives, including investigating new technologies and developing plans for new project implementations
3. Required to be analytical and precise, to explore alternative solutions and analyze feasibility of plans
4. Work independently and to coordinate closely with internal and external stakeholders to implement new processes and technology, to offer innovative solutions to customers
5. Design, communicate and implement an operational plan, create and maintain cost estimates for projects and programs
6. Identify, develop, and gather the resources necessary to complete the project. This may include preparing engineering standards, designs, and work specifications
7. Developing project schedules, budgets, and forecasts; and selecting materials, equipment, and external contractors
8. Liaise with other operational areas in the organization (engineering, design, drafting, technical) to secure specialize resources and contributions for the project
9. Conduct project meetings and prepare regular reports to communicate the status of the project within and beyond the project team
10. Set priorities, allocate tasks, and to meet project targets and milestones, ensure smooth authority submission
11. Solve technical issues such as drawing discrepancies, site condition changes, verify plans, drawings and quantities for accuracy, raise RFI when necessary
12. Ensure accuracy of setting out, levelling and site surveying and all materials used and work performed are as per specifications
13. Liaising with project consultants, architect, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project
14. Support Project manager to liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws
15. Liaising with clients and their representatives (architects, engineers, and surveyors), including attending regular meetings to keep them informed of progress
16. Overseeing quality control and assist safety department to achieve health and safety target on site
17. Preparing method statement, daily weekly and monthly report
18. Ensuring all site inspection and record as per client/developer requirement
19. Ensuring all testing and quantity inspection are carried out as per contract requirement
20. Analyze and resolve engineering problems and demonstrate effective skills in oral and written communication

Requirements

Min 3 years experiences in civil, infrastructure projects

Bachelor degree in Civil Engineering, PE board recognized

You will work closely with development teams to implement SRE best practices, automate operations, and ensure the reliability of our distributed systems. This role combines software engineering with systems engineering to create sustainable, resilient infrastructure solutions that support our rapidly growing platform.

Responsibilities:

• Design, implement, and maintain scalable infrastructure automation using Infrastructure as Code principles
• Lead and implement SLI/SLO frameworks to measure and improve system reliability
• Develop and maintain monitoring, alerting, and observability solutions
• Participate in on-call rotations and lead incident response efforts
• Drive postmortem processes and implement systematic improvements
• Collaborate with development teams to improve system reliability, performance, and efficiency
• Build and maintain tools and frameworks to automate routine operations
• Contribute to capacity planning and performance optimization initiatives
• Champion SRE best practices and mentor junior team members

Qualifications:

• 5+ years of experience in Site Reliability Engineering or similar roles
• Golang is an added advantage
• Cloudflare deep knowledge
• CNCF cert preferred, familiar with Rancher K8s control engine
• Know how to properly use KMS like Hashicorp vault enterprise
• Deep knowledge in ETL
• Strong knowledge of monitoring systems, logging infrastructure, and observability tools
• Solid understanding of networking concepts and distributed systems
• Experience with CI/CD pipelines and automation tools
• Strong problem-solving skills and ability to debug complex production issues
• Experience with high-volume, distributed systems in a production environment
• Knowledge of security best practices and compliance requirements
• Excellent communication skills and ability to collaborate effectively with global teams

Preferred Qualifications:

• Experience with chaos engineering practices
• Contributions to open-source projects
• Experience with performance tuning and optimization

Responsibilities

• Manage and monitor all FM related systems to ensure highest level of system availability
• Providing level 2 support and works with vendors to ensure timely resolution of incidents / issues
• Derive and maintain up to date technical documentation, work instructions and procedure
• Involved in project-based work for new implementation or improvement to existing system
• Supporting DCIM (Data Centre Infrastructure Management) system, to be able to maintain the collection of the data from various location for central monitoring at IoC.
• Support of CCTV system from all locations with linkage to central view at IoC
• Managing Smart Facility System.
• Access Control, i.e. card access, Facial recognition.
• Manage Electronic Key Management System
• Updating the Smart Facility Access list
• Any other ad-hoc duties as assigned by superior from time to time.

Role Requirements:

• Degree in IT or related field with minimum 2 years of experience in network facilities management or Data Centre facility management
• Possess understanding of Facility management but without relevant experience but willingness to learn is welcome
• Skilled in physical security management and systems
• Strong problem-solving skills, critical thinking, excellent analytical ability
• Ability to communicate both verbally and in writing in a clear and concise manner.
• Work well under pressure with differing levels of people
• Ability to maintain confidential information and communications.
• Ability to plan and organize ones work in-order to meet target set
• Results focused and understands critically the needs of meeting customer SLA and KPI requirements.
• Fresh graduates are welcome to apply

Responsibilities:

• End-to-end project management for all diversion and new provisioning works
• Attend of site surveys together with contractors, clients & developers
• Planning & execution of all necessary civil and fibre works
• Project managing contractors and ensure timely completion of projects
• Manage project budget & verification of claim submission
• Update As-Built / project completion reports in GIS
• Manage conflict resolution with regards to payment, access and installation
• Lead and manage maintenance projects and ensure timely recovery of services
• Provide standby support after office hours when needed
• Any other ad-hoc duties as assigned by superior from time to time.

Role Requirements:

• Degree in telecommunication, computer engineering or IT related field
• At least 3 years of working experience in passive infrastructure operations (inside or outside plant operations)
• Strong technical knowledge of outside plant infrastructure which include civil pipe works and fibre optic cable works
• Able to negotiate and work with difficult clients and strong project management skills
• Ability to work independently and collaboratively with contractors, colleagues and building management team / developers
• Independent, self-driven, highly customer focused and able to work under high-pressure environment especially during emergency restoration of telecommunications services
• Good communication skills, keen to learn and a team player
• Applicants with class 3 driving license will have an added advantage

• Design and implement methods, processes, and systems to aggregate and analyze diverse, unstructured data, providing actionable insights for management.
• Develop software programs, algorithms, and automation tools to clean, integrate, and analyze large datasets from multiple sources.
• Work closely with business experts to enhance data and uncover valuable insights to create practical solutions.
• Automate repetitive data tasks to streamline processes and minimize manual work.
• Create clear and effective data visualizations to communicate findings and recommendations to stakeholders.
• Stay informed on the latest developments and best practices in data science, machine learning, and AI.
• Assist the Global IFF Business Control team with various tasks and project requirements.
• Support administrative duties and handle ad-hoc tasks assigned by the Head of Department.

Requirements:

• Diploma in Data Science, Statistics, Computer Science, Mathematics, or a related field.
• 1–2 years of experience in a data science role; experience in a similar industry is a plus.
• Proficiency in programming languages such as Python, R, SQL, and PowerShell, with experience in data manipulation and analysis libraries.
• Familiarity with data visualization tools like Power BI and the ability to effectively communicate complex analyses to non-technical stakeholders.
• Strong problem-solving and analytical skills, with the ability to translate business needs into data-driven solutions.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

- Candidate will be required to Develop, design, program, upgrade software for Crane Safety Devise – Anti-Collision System.

- Troubleshoot & maintenance of Cloud & E-Platform for ACS.

- To provide software solution for our project specific requirements.

- Staying current with modern development practices, including continuously developing new skills as needs arise.

- Degree in Computer Science/Computer Engineering/Information Technology

- 3 years of experience in system analysis, design and programming.

- Ability to develop software in Java, C++, React or other programming languages

- Familiar with Autocad, PLC Programming & HMI Programming

- Strong analytical and problem solving skills.

JOB RESPONSIBILITY

• Responsible for building and facility services, system operations and maintenance program
• Ensure all the works are carried out safely and in accordance with safety work procedures
• Oversees the Building Automation System (BAS) and other systems within the BMS/BASCO/FRC room, including ensuring the smooth operation (within the acceptable limits and are run safely, effectively and economically) and timely rectification of the M&E equipment and responding to all alarms as part of the drive to achieve KPIs.
• Manage and assign Corrective Maintenance (CM) and Preventive Maintenance Work order (PM) using the CMMS (Computerized Maintenance Management System) to the maintenance staff accordingly.
• Lead the coordination and communication process of rectifying the faults between the maintenance staffs, vendors and contractors.
• Manage a team of technicians in attending to breakdown calls.
• Responsible to undertake maintenance program in accordance with the standards, all corporate policies and legislated regulations
• Develop working schedule / duty roster for the team.
• Ensure all building and facility systems are operational within the acceptable limits and are run safely, effectively and economically
• Responsible for conducting preventive and corrective maintenance program in accordance with the standards, all corporate policies and legislated regulations
• Liaison with OEM /system contractor for all building services & regularly solicit feedback from maintenance staff regarding fault status and feedback to users.
• Assists in Business Continuity, Emergency Operations and Exercises such as Fire Drill/Evacuation exercise, major equipment breakdowns, major power shutdown, disease outbreak and incidents where deemed to be of top priority. Activates Recall protocol for emergency situation.
• Provide feasible solution and coordinate with owners/users, consultants, vendors/contractors on engineering function requirement
• Conduct regular inspection of existing building equipment and its serviceability status
• Review service reports and escalate any finding or action that is required
• Assist in the Development, maintenance and the regular review and test of SOP/EOP
• Advice and lead the technical investigation / troubleshooting for rectification works
• Investigate and determine root cause of faults and report
• Prepare and submit regular reports to Management and Customer, with analytical findings and propose improvements.
• Provide training to technician /technical officers, and junior staff as necessary
• Undertake any ad hoc assignment requested or delegated by the AFM/FM as required for the operational needs
• Senior Grade level would have the below additional job responsibilities & deliverables:
  Participate in Ops Meeting and ensure follow-up items for BASCO issues (campus level) are closed in a timely manner.
  - Chairs BASCO Trade meetings with NUH Customer on a regular basis and to follow-up with delegation of tasks to ISS team to ensure completeness in follow-ups.
  - Lead the planning for BASCO coverage at assigned building and on campus wide for CERT requirements
  - Overall accountable for training and uplifting the competency and familiarity of BASCO team members on-site.
  - Target to reduce 15% month-on-month of Open RM items, by proposing practical solutions for customer to implement.
  - Perform on-boarding program for any new joiners to BASCO Team at NUH ISS. This can be done on a fixed-monthly frequency including existing staff as part of the refresher training.
  - Overall visibility & control of the BASCO team & performance at site. Key target is to hold internal bi-monthly meetings and foster camaraderie and team bonding among the team. Target is to establish full contractual compliant BASCO team and achieve 95% attendance rate.
  - Oversee and report the Emergency Recovery Equipment list at a cluster level and on a predefined frequency to ensure all equipment are operational functional and readiness.
  - Overall BASCO Lead during working / Shift Hours and leads in handling any key events / incidents, while working closely with other BASCO team members across the campus for manpower deployment, cross-support or coordination works.

JOB REQUIREMENT

• Degree in Mechanical Engineering / FM discipline with minimum 3 years experience; or Diploma in Mechanical Engineering / FM discipline with minimum 5 years of relevant experience;
• Preferably minimum 2-3 years of working experience in a facility management environment in a hospital / clean room / pharmaceutical will be preferred.
• Pro-active, ability to prioritize work and achieve desired result
• Independent, able to work with minimum supervision and have a good understanding of critical workflow
• Able to communicate and write well in English and Mandarin
• Able to work on Monday to Friday (Shift 1) 0700-1600 Hrs (Shift 2) 1100-2000 Hrs; Saturday 830am to 1230pm.

Project/Site Engineer is responsible for planning and coordinating technical engineering initiatives to make sure they can complete a project within their budget and according to a schedule, also to uphold project standards by researching compliance regulations, developing project implementation plans and adjusting specifications for elements of a project.

Job Description:

• To study tender / construction drawings, specifications and contracts to understand project requirements.
• Plan and schedule work sequences for construction operation, according to the Project Management Plan and master construction programme
• Liaise with consultants, client & main/sub-contractors and coordinate for site activities arrangement and work progress supervision
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering

Senior Project Engineer is responsible for assisting the Project Manager on the progress of the projects/site works and manpower related aspects of the project. He/She is to oversee drawing management and make sure the updated drawings to the clients and subcontractor are issued. This also includes planning and coordinating technical engineering initiatives to make sure a project can be completed within budget and according to schedule, while upholding project standards by researching compliance regulations, developing project implementation plans and adjusting specifications for elements of a project.

Job Responsibilities:

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, clients & main/sub-contractors and coordinate for site activities arrangement, design submission and work progress supervision
• Perform site inspection (excavation, structural, casting) and ensure that the work is carried out based on the project specification and construction drawing / final approved drawing from authorities
• Lead a team of supervisors / foreman for works coordination with main/subcontractors and/or authorities and/or consultant on project progress and technical issues
• Assist in preparation of method statement and construction sequence for project implementation
• Assist Project Manager in Project Costing, monthly progress claims and monthly progress report
• Support Quantity Surveyor (QS) in verifying progress payments and claims
• Coordinating the handing-over of completed works to the client and completion of the necessary rectification works

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering
• At least 3-6 years of working experience in the related field is required

From making valuable connections between people and businesses to building premium services that deliver high-value experiences, we are the teams who create all of Meta's products used by billions of people around the world. As Meta focuses on building the next evolution of social experiences, the team plays a crucial role in shaping the communication pathways that all sized businesses, especially small to medium ones, need to thrive in the new digital economic environment. And we achieve that from end-to-end product and technology innovation.

As a Software Engineer on the team at Meta, you can help build cutting-edge full-stack technologies that will transform the way people and businesses connect and communicate. You’ll help develop the next-generation of products that help us connect the next billion people, create new features that have billions of interactions per day and be a part of a team that’s working to help people connect with each other around the globe.

Responsibilities

• Full stack development with a variety of coding languages
• Create consumer products and features using internal programming language Hack
• Implement web or mobile interfaces using XHTML, CSS, and JavaScript
• Work closely with our PM and design teams to define feature specifications and build products leveraging frameworks such as React & React Native
• Work closely with operations and infrastructure to build and scale back-end services
• Build report interfaces and data feeds
• Sets direction and goals for the team regarding project impact, product quality and engineering efficiency
• Leads major initiatives, projects, teams, rollouts and phased-releases
• Helps to onboard new team members, provides mentorship and enables successful ramp up on your team's code bases

Minimum Qualifications

• 8+ years of programming experience in a relevant programming language
• 6+years relevant experience building large-scale applications or similar experience
• Experience with scripting languages such as Python, Javascript or Hack
• Experience leading major initiatives successfully
• Experience leading projects and teams accordingly
• Experience building and shipping high quality work and achieving high reliability
• Experience improving quality through thoughtful code reviews, appropriate testing, proper rollout, monitoring, and proactive changes
• Experienced in utilizing data and analysis to explain technical problems and providing detailed feedback and solutions
• Bachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience.

Preferred Qualifications

• Experience in programming languages such as C, C++, Java, Swift, or Kotlin

Meta builds technologies that help people connect, find communities, and grow businesses. When Facebook launched in 2004, it changed the way people connect. Apps like Messenger, Instagram and WhatsApp further empowered billions around the world. Now, Meta is moving beyond 2D screens toward immersive experiences like augmented and virtual reality to help build the next evolution in social technology. People who choose to build their careers by building with us at Meta help shape a future that will take us beyond what digital connection makes possible today—beyond the constraints of screens, the limits of distance, and even the rules of physics.

• Reports to Construction Manager
• Ensure all relevant permits and clearances obtained from respective agencies prior any excavation works
• Ensure all resources provided (manpower/equipment) comply with stakeholder’s requirement
• Coordination and liaison works with relevant authorities / agencies on services /stakeholder for utilities and diversion works
• Facilitate Permit-to-dig application from Client / Stakeholders
• Attend the meeting with the stakeholder/client
• Generate and handle company reports, meetings and documents required
• Propose alternative work method or other way to increase productivity
• Provide advise on appropriate measures on services / utilities protection and adopt safe work procedure to prevent damage to utilities
• Ensure the activities comply with the quality, environment, health & safety requirements

Job Requirements:

• Degree in Civil Engineering or its equivalent
• Minimum of 5 years relevant experience in road construction projects
• Possess basic understanding of Permit-to-Dig process and application
• Proficient in Microsoft Office and AutoCAD
• Attained BCSS/Confined space
• Qualified as a Licensed Cable Detector Worker (LCDW), Licensed Telecommunication Cable Detection Worker (TCDW)
• Registered Earthwork Supervisor (RES) with EMA/SPPG
• Ability to perform task under pressure and multi-task
• Hardworking and willing to learn
• Good interpersonal skills
• Past experience in LTA project (NSC) is an added advanatge
• Project: Viaducts
• Location: Woodlands

Job responsibilities:

• Report to, and provide support to the Lead/ Senior Instrumentation Engineer on assigned projects and report to the Head - Instrumentation Engineering at the basis level.
• Be familiar with and implement Company work processes, procedures and quality policy as appropriate on assigned areas of projects.
• Be aware of Company contractual requirements and Scope Boundaries
• Responsible for work assigned by the Lead / Senior Engineers through project lifecycle phases and for compliance to project specific performance, integrity, quality and HSE requirements relevant to his/ her assigned scope of work. Specific duties could include:
• Prepare requisitions, specifications and datasheets as assigned.
• Evaluate vendor offers and prepare Technical Bid Evaluation Report for assigned packages.
• Populate Instrument database such as SPI/Aveva Instrumentation.
• Prepare and Issue documents such as Instrument Index, Hazardous Are registers etc
• Provide inputs to designers to develop design/drafting deliverables such as cable block diagrams, wiring diagrams, Layouts and review these deliverables
• Assist in preparation of control system deliverables such as I/O lists, Control narratives, Cause and Effect Matrix etc.
• Review and provide technical inputs on Instrumentation Engineering related technical matters to interfacing disciplines
• Review and provide technical inputs to equipment/ package related technical matters
• Be responsible for and manage the Instrumentation Engineering technical interfaces with equipment and package suppliers, in coordination with the Lead/ Senior Instrumentation Engineer, for assigned areas to ensure that the equipment and packages comply with the technical requirements & specifications of and to monitor the compliance to Client’s Basis of Design, Standards & Project Specifications.
• Continuously seek to improve discipline working methods, tools and procedures and contribute actively to “Discipline Development” and “Experience Transfer”.

Work experience requirements:

• Minimum of 3 years of work experience in instrumentation engineering activities such as preparation of data sheets, specifications, Technical Bid Evaluation reports etc in a reputed engineering consultancy.
• Applicants with less than 5 years of relevant Instrumentation Engineering experience may be considered for junior positions.

Qualifications:

• Bachelor’s Degree in Instrumentation/Electrical/Chemical Engineering with relevant work experience as per above.

Other skills:

• A self-starter who can work independently, make sound decisions, analyse problems and provide focused solutions.
• Good understanding and knowledge of oil and natural gas industry standards such as, but not limited to, API (American Petroleum Institute), ISO (International Organisation for Standardisation),IEC, NORSOK, EU Directives ATEx, IECex requirements and other relevant standards related to Instrumentation Engineering.
• Effective verbal and written communication skills in English
• Experience in engineering of Oil and Gas offshore projects would be an advantage.
• Experience in SPI/Aveva Instrumentation would be an advantage.
• Applicant shall have strong computer literacy in commonly used business software applications such MS Word, MS excel, Teams etc.
  
  We regret that only shortlisted candidates will be notified.

Job Description

• Scope of Work: NPI (New Product Introduction) and mass production, for assigned product (module, sub-assembly, instrument level) for LCMS.
• Product Quality, Yield, and Cycle Time: Lead cross functional team to drive continuous product and quality performance improvement i.e. factory yield, DEFOA, warranty/Annual Failure Rate and production efficiency (yield and cycle time).
• Product Development: Collaborate with R&D in product development and validation, and provide engineering support. Works with R&D to design, develop and release new tools or process technologies and is a resource for risk assessments and design for manufacturability. Influencing the design of the product and/or process to ensure manufacturability leveraging global supply chain, enabling prototyping and run manufacturing and realiability test, scale-up, and manage prototype transition into production. Develop manufacturing and test for new product i.e. responsible for the development of product manufacturing process, assembly fixture/tooling and test system. Design test procedures to optimize test time and troubleshooting. Actively participate design reviews and provide input on electronic circuit designs and obsolescence re-design. Define manufacturing process and test and product test plans. Support and implement the transition of products and manufacturing processes from prototype to full production, and through the entire product life cycle.
• Product Sustenance: Performs a variety of engineering duties to support manufacturing operations. Provide technical support to day-to-day product issues and all product/manufacturing process related issues, which include customer quality issues, production line troubleshooting, product/part/process change validation, etc. Maintain & improve product quality. Redesign products/processes to meet cost objectives, obsolescence, and customer requirements. May be assigned as the technical leader to assist operating manager or as project lead for value engineering or CPE (current product engineering) projects, product/process improvement, product/process transfer, equipment and test enhancement, New Product Introduction.
• Process Improvement/Digitalization and Compliance, Lean Manufacturing: Ensure compliance to engineering change order (ECO) procedures and work instructions. Collaborate with R&D to transition design prototypes into cost-efficient, manufacturable (DFx) high-volume products. Implementing Lean Manufacturing principles within manufacturing. Design jig/fixtures for new product, to ensure product manufacturability. Utilizes digital solutions to optimize and maintain state of the art manufacturing processes.
• Supply Chain related: Collaborate with procurement and material engineering in the specification, sourcing and qualification of materials used in the design and production of Agilent products to meet quality, cost and manufacturability goals.
• Other tasks and responsibilities assigned by manager in support of business needs.

Qualifications

• Education: Bachelor's or Master's Degree or University Degree or equivalent in the field of Electrical & Electronic Engineering. Candidates with Mechanical, Mechatronic Engineering, Physics or Computer Science qualifications with strong product engineering experience are also encouraged to apply.
• Certifications: Relevant certifications can enhance your qualifications. Examples include ASQ, QC/QA, EMC, and EMI.
• Knowledge in 6Sigma / Engineering Statistics (PFMEA, SPC, DOE, Process Capability), Value Stream Mapping, Qualification of equipment and Process Validation would be added advantages.
• Skills: Knowledge of probability and statistics, board-level product qualification procedures, manufacturing processes, and familiarity with tools like Microsoft Office and pythons. Knowledge in designing test fixture and tools is added advantage.
• Experience: At least 5+ years relevant experience, especially in manufacturing environment of Mass spectrometry. Vacuum system, electronics and test is desirable. Process characterization and validation using tools such as Cp/Cpk, and Design of Experiments techniques have added advantage. Product test methodology, test software and tester development are advantageous.
• Passionate, innovative, systematic problem-solving and leading on continuous improvement. Self-starter and proven track record of results in setting, implementing complex engineering projects and achieving the goals and demonstrated levels of creativity.
• Must possess strong engineering and analytical skills. Ability to multitask, prioritize and work independently.
• Strong team player with good interpersonal skill and excellent collaboration, oral and written communication skills.

Job Descriptions & Requirements

Job Descriptions:

To work with customer to identify and verify the scope of work

To work with customer or customer’s site project manager to develop project schedule

To work with project installation team to develop project installation schedule

To plan weekly work schedule with scheduler for the installation team

To work with project installation team to complete the weekly project monitoring report

To ensure timely progressive monthly project billing

To ensure that work site safety regulations are being enforced

To provide and monitor scope of work on project variation work for salesperson

Ability to work under pressure and resolve problem independently

Job Requirements:

Candidate must possess at least Professional Certificate/Nitec, Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical/Electronic), Engineering (Mechanical), Computer Science/Information Technology or equivalent.

At least 2 Year(s) of working experience in the related field is required for this position.

Preferably Junior Executive specialized in Engineering - Electronics/Communication or equivale

In this role, you will be involved in evaluation, testing and implementation of IT infrastructure systems to support PSI business processes and operations.

Based in Singapore

You will:  

• Maintain, upgrade and improve company IT infrastructure systems and networks
• Design new computer systems and frameworks
• Manage the set-up and configuration of IT infrastructure systems including Azure/MS 365/Microsoft Exchange/ MS Teams and its integrations
• Develop and implement maintenance procedures, troubleshoot reported errors
• Optimize and maintain LAN and WAN
• Optimize and maintain backup and restore processes
• Install, configure and maintain server (HP/HPE) and network (Cisco) hardware
• Translate highly technical specifications into clear non-technical requirements
• Create IT guidelines and manuals
• Deliver trainings on IT infrastructure system processes

The key functions of Process Engineer is to:

• Applies engineering principles and techniques to optimise the production processes in a manufacturing environment to meet organization objectives
• Analyse and troubleshoots process engineering, manufacturing and /or maintenance issues and recommends engineering solutions, and develops work instructions for out of control processes
• Leads production and manufacturing systems improvement projects, and develops operation plans in accordance with organization objectives and other regulatory requirements.

Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide feedback/ training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Mechanical /Microelectronics / Chemical Process / Chemistry / Physics/ Material Science/Material Engineering
• Min 7 years of relevant work experience in Etch Process or BEOL
• An excellent team player with good interpersonal, communication and written skills
• Strong leadership capabiity to lead and guide junior engineers
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Education & Work experience Requirements:

1. At least Bachelor's degree in Automation, Control Engineering, Internet of Things (IoT), or related fields.

2. At least 3 years of relevant work experience in the structural steel industry.

Job Description:

1. Develop and optimize automation solutions based on production requirements, and coordinate with teams to deploy automated inventory management systems.

2. Design and improve automated steel structure production processes, integrating industry-standard software (e.g., Tekla) with processing equipment to achieve automated cutting, assembly, and welding.

3. Maintain existing production lines and propose improvements to minimize manual intervention and increase efficiency.

4. Collaborate with teams to ensure seamless integration of automated systems with existing production management systems, and provide training and guidance on new equipment and systems.

5. Generating reports outlining new automation ideas, machine and software upkeep best practices, test results.

Key Skill & Competency Requirements:

1. Proficiency in sensor principles and applications, with the ability to design and optimize sensor-based monitoring and control systems.

2. Proficiency in embedded systems design, including embedded hardware development, microcontroller programming (e.g., ARM, STM32), and real-time operating systems (RTOS).

3. Familiar with C# programming.

4. Familiar with mainstream automation development tools and software, such as LabVIEW, MATLAB/Simulink, Siemens TIA Portal, and AVEVA System Platform.

5. Familiar with industrial automation technologies, including PLC programming, servo control, and industrial robotics.

6. Familiar with smart manufacturing technologies (e.g., Industry 4.0, MES systems, IoT devices) and their applications in steel structure manufacturing.

Role and Responsibilities:

• Designing, implementing, maintaining, and supporting local and remote portions of the PCI-DSS enterprise financial network.
• Deploy InfoSEC-approved DC architecture based on existing best of breed design and emerging trends.
• Management of Campus/Partner connectivity via LL, VPN (Virtual Private Networks) (IPSEC and SSL (Secure Sockets Layer)) & SDWAN
• SSL/TLS certificate management.
• Application Delivery management via DEV/QA/UAT/Prod support.
• Triage support for all LAN/WAN/Cloud related operations and infrastructure.
• Manage circuit provisioning, activations, and troubleshooting.
• Conducting regular security assessments of the enterprise IT environment.
• Participating in design and strategy meetings for assigned IT projects for the enterprise.
• Evaluating existing communications systems, identifying deficiencies, and making network performance recommendations.
• Installing and configuring Physical Servers, Host VM’s and Data/Voice Communications equipment as needed inside the APAC region offices and datacenter’s.
• Responsible for performing off-hours maintenance as required.

Required Skills:

• Network+/KCA/CCNA/CCNP/NSE4/CISSP preferred.
• Conversational competency in Cantonese and/or Mandarin to work with APAC partners and providers.
• Bachelor’s degree or equivalent education and/or experience.
• IPS (Intrusion Prevention System), DDOS (Distributed Denial of Service), 802.1X, NAC (Network Access Control), ISE, AV implementation experience.
• ISO 8583, PCI-DSS, GDPR (General Data Protection Regulation) compliance and standardization knowledge a plus.
• Scripting in TCL, knowledge of VMware ESX, Coralogix, Netreo, OpsGenie, Wireshark/PCAP analysis, ELK, Wazuh, Fortinet Fabric technologies (client, sandbox, gate, analyzer, VDOM’s/ADOM’s., AP’s)
• Dynamic Routing knowledge of OSPF, iBGP, eBGP
• F5 LTM VE (Virtual Edition) Knowledge, iNAC/eNAC knowledge
• Knowledge of HPE (Hewlett Packard Enterprise), Dell, Cisco Switching Checkpoint/SPLAT familiarity.

Role:

• Diagnose and troubleshoot problems with marine engines, auxiliary engines, steering systems, and other related components.
• Carry out repairs on inboard and outboard engines, including work on fuel, cooling, and exhaust systems.
• Perform routine maintenance to ensure all shipboard systems are functioning properly.
• Maintain cleanliness of the ship and engine room while onboard.
• Provide detailed reports on work performed and communicate the nature of repairs and services to customers.

Safety and Compliance:

• Follow all safety protocols and regulations to maintain a safe working environment.
• Ensure compliance with environmental regulations related to marine services and repairs.

Documentation and Reporting:

• Keep accurate records of all services performed, including time spent, parts used, and labor involved.
• Use service management software to log and track repairs and maintenance tasks.

Team Collaboration:

• Collaborate with other technicians and service team members to ensure efficient workflow and high levels of customer satisfaction.
• Assist in training and mentoring junior technicians as required.
• Perform any other duties as assigned.

Requirements:

• Diploma or equivalent; technical certification or associate degree in marine mechanics or a related field is preferred.
• Minimum of 2 years’ experience in marine service and repair.
• Strong mechanical skills and ability to solve problems.
• Proficient in using diagnostic tools and marine service equipment.
• Knowledge of marine engines, auxiliary engines, and cargo pumps.
• Ability to read and understand technical manuals and schematics.
• Capable of lifting heavy objects, working in various weather conditions, and performing physically demanding tasks.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Validation Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $6,000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist Quality and Validation Manager Asia to complete the tasks on time with good quality.
• Responsible for the successful execution of the Validation functions for customer projects, as required – Quality, Cost, and Time.
• Responsible for driving and supporting the project team for projects where validation is required and ensuring execution complies with company's standards.
• Provide training on qualification activities.
• Responsible for maintaining qualification documentation standards and procedures.
• Create and maintain qualification/validation documentation from the design phase of projects for mechanical, software, and hardware parts.
• Lead the qualification/validation activities of projects (risk analysis, protocol drafting, and test execution during FAT/SAT) internally and at our partners' sites (approximately 20% of the time on travel throughout the year).
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 2 years of working experience in quality or validation of automated systems (mechanical, software, hardware) or equivalent
• Prior work experience in control systems design is advantageous
• Excellent understanding of assembly, test & debug procedures

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69403 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Building & Construction
• Position Title: Site Engineer
• Working Location: Pioneer
• Working Hours: 5.5 working days (Mon to Fri 8 AM – 5 PM, Sat half day)
• Salary Package: Basic Salary up to $6,500 + AWS + Variable Bonus + Transport Allowance
• Duration: Permanent

Key Responsibilities

• Handle daily construction activities, ensuring works progress according to the project schedule, design, and safety standards.
• Provide technical support and guidance to construction workers, subcontractors, and other engineers on-site.
• Ensure that construction methods and materials used meet project specifications and quality standards.
• Coordinate with project managers, contractors, and other team members to ensure smooth and successful execution of the project.
• Conduct regular inspections of construction activities to ensure the quality of work meets industry standards and the specific requirements of the project.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum Diploma in Civil Engineering or related qualification
• Has experience with the Land Transport Authority (LTA), Strategic Planning Policy Group (SPPG), or Defence Science and Technology Agency (DSTA)
• Prior experience with road and airfield runway construction and resurfacing is required
• Proficient in MS Office
• A class 3 driving license is required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69580 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Industry: HVAC Industry
Location: East
Working Hours: Monday Friday, 8.30am- 5.30pm
Basic + AWS + VB

Responsibilities:

• Provide technical support to contractors/customers, assisting them with any technical queries or concerns.
• Conduct site measurements and evaluate system performance to identify areas for improvement and optimization.
• Conduct Technical trainings.
• Support product quality control through rigorous testing and analysis.
• Undertake ad-hoc assignments as required, demonstrating flexibility and adaptability in your work.

Requirements:

• Possess a Higher Nitec or Diploma in Mechanical, Electrical/Electronic Engineering, or a similar field.
• Experience with ACMV including troubleshooting and Building Management Systems (BMS) would be advantageous. On-the-job training will be provided.
• Results oriented with the ability to define problems, exhibit sound judgement, and take initiative to develop alternative solutions rationally and independently.
• Possess a valid Class 3 or 3A driving license, which will be an advantage.
• Able to work both independently and collaboratively as a valuable team player.
• Both Junior and Senior positions are available, depending on experience.

Please send your updated CV to [email protected]

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

We regret that only shortlisted candidates will be notified

EA Personnel: Lim Jing Yee, Lena
EA Registration No.: R1872533
People Profilers Pte Ltd
20 Cecil St, #08-09, PLUS Building, Singapore 049705
EA Licence Number: 02C4944
Tel: 6950 9755
JOBID: QWV77R8W