Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

We are partnered with an established organisation to look for a Test Automation Engineer on a permanent basis.

Responsibilities:

• Automation Design & Development: Creating automation designs and scripts to test product functionality.
• SDLC Participation & Collaboration: End-to-end testing and Interfacing with a diverse range of IT stakeholders (vendors, developers, business analysts, project managers, etc.).
• Test Planning & Execution: executing tests across various domains (systems, networks, applications, etc.).
• Continuous Improvement: Evaluating, maintaining, and improving automation systems for efficiency and effectiveness.
• User Acceptance Testing: Emphasizes documenting processes for ease of future modifications, assisting with User Acceptance Testing (UAT)

Responsibilities:

• Bachelor's Degree in Computer Science / Computer Engineering or equivalent
• At least 6 years of experience in Automation Engineering with a solid understanding of Testing Methodologies, frameworks and SDLC.
• Proficiency in Java, VBScript and automated scripts
• Experience working in an agile environment

Due to the urgency of this role, we are only considering candidates with existing working rights in Singapore.

If you are keen on this role and meet the qualifications, apply now or send your cv to [email protected]. We will arrange for a confidential chat if your profile aligns.

If you do not hear from us within 2 working days, please take this as a notification that you have not been shortlisted.

Working hours: Mon-Fri - 8.15am to 5.45pm

Responsibilities:

• Inspect outgoing parts & incoming parts according to specification of inspection
• Maintain quality record and file quality data.
• Highlight quality problems to Managers for action.
• Ensure non-conforming products are not mixed with good products prior to disposition.
• Authorise the rejection of parts if found unsatisfactory.
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.
• Perform factory routine test and check of switchboards completed in the workshop.
• Testing and commission of switchboards on board vessels or on-site to the satisfaction of customers;
• Attend to warranty claims / quality complaints. Conduct tests on switchboards.
• Assist the Manager in quality responsibilities and achieving quality objectives.
• Maintain good housekeeping in the QA Department.
• Observe and adhere to safety rules during the performance of every task.
• Ensure the use of calibrated instrument for inspection.
• Initiate action to prevent the occurrence of Product Non-Conformity.
• Initiate, recommend or provide solutions to problem detected.
• Verify the implementation of solutions.
• Control further processing and delivery of Non-Conforming products until the deficiency corrected
• Carry out other responsibilities as and when assigned by the superiors.
• Follow the procedures of Quality Management System for effective implementation and control.

Requirements:

• Diploma in Electrical/Mechatronics Engineering
• At least 2 years of QA experience
• SG or SPR only
• Able to work under stress and meet tight schedule
• 14 days annual leave
• AWS, Variable Bonus, 14 days medical leave
• Lunch Subsidy
• Transport pickup @ Boonlay, Bukit Batok & CCK

Interested candidates who wish to apply for the advertised position, please click APPLY NOW.

Alternatively, you may send your application and resume in MS Words format to [email protected] or Whatsapp to 8767 9648

We regret that only shortlisted candidate will be notified.

K N Tan
Registration Number: R1768143
EA Licence No: 17C8778 (JIH SUN EMPLOYMENT AGENCY)

R: N12OP3PWT30

Responsibilities:

• Oversee all civil infrastructure and building projects for defects rectifications.
• Provide regular status updates and prepare weekly and monthly summary reports.
• Attend meetings and inspections with clients and other stakeholders.
• Gather and manage documentation, including material certificates and test reports from suppliers or subcontractors.
• Prepare, review, and/or approve documentation submissions to clients and other stakeholders.
• Coordinate and engage with relevant parties, including clients and stakeholders, for inspections and other related activities.
• Submit Requests for Inspection for all inspection activities and maintain accurate records.

Requirements:

• Minimum Degree in Civil Engineering or related field
• At least 5 years of relevant experience
• Experience in defects rectifications

Kindly email your resume in a comprehensive Word format to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Please be informed that by applying for the advertised position, the candidate is considered to have given their consent for us to collect, utilize, or disclose their personal information for the purposes related to the services we provide.

Jacqueline Goh

EA License Number: 22C1430

Registration Number: R1326664

Our client is an MNC specializing in advanced sheet metal fabricators with a focus on precision engineering and a precision machining service provider based in Singapore.

Job Highlights:

• Basic Up to $4000
• Working Location: Tuas (walking distance from MRT)
• Working days: 5 days (Mon-Fri) - Office Hours

Job responsibilities:

• Oversee in-progress and final product inspections.
• Approve first article submissions and ensure compliance with customer requirements.
• Monitor and improve quality standards continuously.
• Resolve quality issues with internal teams and external partners.
• Supervise and ensure proper calibration of measuring equipment.
• Review on non-conformances & approve disposition actions.
• Prepare 8D reports to address quality issues.
• Provide regular quality reviews and training sessions.
• Support product and process development for First Article Product.
• Assist in maintaining ISO compliance, including reports and follow-ups.

Job Requirements:

• Minimum Diploma in Mechanical, Manufacturing, or related Engineering field, or equivalent.
• At least 3 years of relevant experience is required for this role.
• Knowledge of measuring and statistical techniques.
• Familiarity with CMM machines.
• Ability to lead a team of quality operators.
• Class 3 driving license is a plus.

How to Apply:

Interested candidates, please submit your updated resume by using Apply Now button

**We regret to inform that only shortlisted candidates will be informed.**

Lee Yu Qian (Lenore)

Registration Number: R24124538

EA License Number:18C9027

Job Scope:

• Devising and implement methods and procedures for inspection, testing and evaluation the precision and accuracy of products and production equipment
• Conduct quality assurance test and perform statistical analysis to assess the level of control and manage product quality risks
• Undertake root cause analysis of incidents requiring corrective action
• Other duties as assigned

Requirements:

• Min Diploma or equivalent
• Preferably with API Q1 and Q2 certifications as well as internal audit certification

Angela Teh Ling Wei (CEI No.R1104464)

Contact Number:67860100

Email Address:[email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted

*Entry-Level* QA Engineer (Manual Testing)

Working Location: Singapore, Central (Hybrid Working Arrangement)

Salary Package: Up to $3,800 + AWS + Variable Bonus

We are looking for a Quality Assurance (QA) engineer, who will be will be responsible for conducting tests before product launches to ensure software runs smoothly and meets client needs. The QA engineer responsibilities include designing and implementing tests, debugging and defining corrective actions. You will also review system requirements and track quality assurance metrics (e.g. defect densities and open defect counts.) The QA engineer role plays an important part in our company’s product development process.

Responsibilities

• Review requirements, specifications and technical design documents to provide timely and meaningful feedback
• Create detailed, comprehensive and well-structured test plans and test cases
• Estimate, prioritize, plan and coordinate testing activities
• Identify, record, document thoroughly and track bugs
• Perform thorough regression testing when bugs are resolved
• Monitor debugging process results
• Track quality assurance metrics, like defect densities and open defect counts
• Stay up-to-date with new testing tools and test strategies
• Coordinate with development team/project management team for smooth SIT/UAT

Requirements

• Tertiary degree in Computer Science, Engineering or a related subject
• Proven work experience in software quality assurance
• Strong knowledge of software QA methodologies, tools and processes
• Experience in writing clear, concise and comprehensive test plans and test cases
• Experience working in an Agile/Scrum development process
• Hands-on experience with both white box and black box testing is a plus
• Experience with performance and/or security testing is a plus
• Self - starter and can work independently

"By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

Contact you about potential opportunities.

Delete personal data not required at this application stage.

To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Aloysius Tan Sheng Rong - R22110441

ScienTec Consulting Pte Ltd - 11C5781

• Adecco is partnering with a leading bank to look for a QA Tester
• Starts off as a 12 months contract

Responsibilities: 
1. Assist Product Owner to lead the Agile team and deliver the product road map required to support the business growth.
2. Acquire in-depth understanding of business processes to articulate use-cases/user-stories for identified features/capabilities for the platforms
3. Work in agile framework and be accountable for delivery of product build road map by ensuring that platform road maps prioritised against business are published regularly
4. Engage key stakeholders periodically to refine business requirements and work towards maximising the product value based on the feedback
5. Collaborate with squad members to deliver wireframes, user journeys, and product backlog, and other artefacts as needed to support technical design and development
6. Be responsible for modification and enhancements of existing products to address emerging business/market, user or regulatory needs
7. Conduct market research on assigned industries/sectors and identifying key players in the sectors
8. Perform other project administrative tasks such as handling of presentation decks for senior management, assisting in organising inception workshops, regional stakeholder managements (PSC) etc
9. Coordinate with various key stakeholders to prepare UAT Test cases and review of test results based on targeted deliverables. Liaise with vendors or other departments to ensure testing is complete and results are documented and filed.
10. Develop test scenarios and perform system testing based on test plans.
11. UAT support and coordination: Support user acceptance testing by coordinating with end users, gathering feedback.
12. Reporting to Delivery Lead

Key requirements:
1. Candidate should possess at least bachelor’s degree in business management, IT, Science, Mathematics, Engineering or Digital Innovation.
2. At least 2-3 years of experiences, preferably in Banking domain.
3. Resourceful and possess strong analytical skills
4. Proficient with Microsoft Office applications
5. Experience in using JIRA and Confluence, SQL. Familiarity with Agile project delivery methodologies will be considered favourably
6. Pro-active and independent with a team player mentality
7. Eager to take on challenges, driven and motivated to grow
8. Strong communication, negotiation and stakeholder management skills to ensure the product roadmap and features are well presented and buy-in obtained from stakeholders.

Next Step

• Please send your resume to: [email protected]

Amos Tan Jun Han

EA Licence Number: 91C2918

Personnel Registration Number: R23113385

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Well Established Company
• Basic $ 3000 to $ 4500 + AWS + VB
• No Experience Welcome – Training will be provided
• Working Location: Tuas, Singapore (Company Transport Provided)
• Normal Working Hours (Monday - Friday)

Job Responsibilities:

• Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out incoming process inspection
• Authorise the rejection of parts if found unsatisfactory
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers
• Perform factory routine test and check of switchboards completed in the workshop
• Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints
• Maintain good housekeeping in the QA department
• Observe and adhere to safety rules during the performance of every task
• Initiate, recommend, or provide solutions to problem detected
• Control further processing and delivery of non-Conforming products until the deficiency has been corrected
• Follow the procedures of Quality Management System for effective implementation and control
• Carry out other responsibilities as and when assigned by the superiors

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $ 2700 to $ 3500 + AWS + VB
• No Experience Welcome – Training will be provided
• Working Location: Tuas, Singapore (Company Transport Provided)
• Normal Working Hours (Monday - Friday)

Job Responsibilities:

• Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out incoming process inspection
• Authorise the rejection of parts if found unsatisfactory
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers
• Perform factory routine test and check of switchboards completed in the workshop
• Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints
• Maintain good housekeeping in the QA department
• Observe and adhere to safety rules during the performance of every task
• Initiate, recommend, or provide solutions to problem detected
• Control further processing and delivery of non-Conforming products until the deficiency has been corrected
• Follow the procedures of Quality Management System for effective implementation and control
• Carry out other responsibilities as and when assigned by the superiors

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $ 3000 to $ 4500 + AWS + VB
• No Experience Welcome – Training will be provided
• Working Location: Tuas, Singapore (Company Transport Provided)
• Normal Working Hours (Monday - Friday)

Job Responsibilities:

• Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out incoming process inspection
• Authorise the rejection of parts if found unsatisfactory
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers
• Perform factory routine test and check of switchboards completed in the workshop
• Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints
• Maintain good housekeeping in the QA department
• Observe and adhere to safety rules during the performance of every task
• Initiate, recommend, or provide solutions to problem detected
• Control further processing and delivery of non-Conforming products until the deficiency has been corrected
• Follow the procedures of Quality Management System for effective implementation and control
• Carry out other responsibilities as and when assigned by the superiors

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Carry out calibration of equipment, standardization and stocking of reagents in accordance with schedule.
• Assist in the preparation, compilation, and maintenance of Quality Manual of AmSpec Singapore which comply with standard for accreditation and requirements of the competent authority.
• Conduct regular quality audits with the Company and provide feedback to Department Manager.
• Ensure consistent follow-up for non-conformances in quality control.
• Develop enhanced awareness with continual education of all AmSpec personnel on quality assurance principles and accreditation requirements.
• Conduct regular in-house training, briefing, meeting and feedback dialogue session etc.
• Work closely with Lab and Business Manager in providing advice & and guidance in ensuring the consistently conform to Quality Assurance procedures.
• Deputize for the Quality & HSE Manager, in his / her absence in liaising with SAC-SINGLAS on all matters related to accreditation or other quality related matters.
• Deputize, in his / her capacity, for QA Manager in all QA and calibration-related matters.
• Assist Chemists in identifying tests / equipment that requires SQC, gather necessary data, set up manual and electronic control chart. Monitor progress and ensure conformance.
• Assist and implement necessary corrective actions assigned from all audits.
• Brief staff and check reagents / equipment before witnessing of test takes place.
• Carry out internal and external calibrations and issue Certificate of Calibration based on the scope of accreditation.
• Undertake specific quality-related projects as directed by the QA and HSE Manager.

Requirements:

• Diploma / Degree in Science or at least 2-3 years’ experience working in a chemical, petroleum, or petrochemical laboratory.
• Have some experience in changing GC column would be an advantage.
• Ability to understand ASTM standards and procedures.
• Knowledge of quality assurance terminology, methods and tools.
• Protocol, procedure, and safety oriented.
• Analytical and problem-solving skills.
• Able to work effectively under pressure, while directing numerous projects concurrently with different deadlines.
• Able to work on flexible schedule as position will include evenings, weekend, and holidays, based on customers’ requirements.
• Dependable and reliable individual whose daily presence adds to the success of the department.
• Able to work independently and a good team player.
• Ability to work and communicate with persons of diverse personalities and backgrounds.

Additional Information

• Qualified or interested candidates, please submit your updated resume in MS Word / PDF format to [email protected]

We regret to inform you that only shortlisted candidates will be notified.

Please include the following in your resume (if any): -

• Last drawn / current and expected salary.
• Reason(s) for leaving previous / current company.
• Education background.
• Work experience in point forms.

Areas of Responsibility:

1. EduTrust

· Spearhead the entire EduTrust certification and renewal process, ensuring successful preparation and coordination for site assessments.

· Provide clear guidance to process owners on meeting EduTrust requirements and maintaining alignment with Policy and Operations Manual (POM) standards.

· Act as the custodian of all controlled documents, ensuring timely updates and consistent document control, including Policy and Operations Manuals.

· Collaborate with process owners to review and enhance policies and SOPs, ensuring alignment with EduTrust criteria and operational effectiveness.

· Conduct thorough internal assessments as part of the QA team to monitor compliance and identify areas for continuous improvement.

· Analyse performance data, audit findings, and compliance trends to identify gaps and recommend improvements.

· Support the development of internal benchmarks and evaluate organisational performance against relevant industry and regulatory standards.

2. ERF

· Ensure timely and accurate submissions related to SkillsFuture Singapore (SSG) registrations, including updates for Managers, Academic & Examination Board (AEB) members, courses, and premises.

· Coordinate the submission of PEI Annual Returns, ensuring completeness and adherence to regulatory deadlines.

· Assist in the preparation and execution of ERF renewal exercises to maintain compliance and secure re-certification.

· Maintain organised and up-to-date documentation, ensuring records are easily accessible and audit-ready.

Requirements:

• Minimum Diploma or Degree in a relevant field.
• At least three years of experience as a QA Manager in a Private Education Institution (PEI).
• Proven track record of having led at least one full EduTrust certification or renewal assessment.
• Strong understanding of EduTrust and ERF requirements, including compliance standards, internal assessments, and documentation practices.
• Ability to perform data analysis, interpret trends, and derive meaningful insights to support benchmarking and decision-making.
• Familiarity with establishing and monitoring internal benchmarks to support continuous improvement and regulatory compliance.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Senior QA Executive

Job Specification

1. Overall responsible for the QA/QC and R&D functions

2. To lead and ensure a productive and high-performance QA and R&D work environment

3. To provide effective and efficient technical support services to support the company’s business growth and operations.

4. To develop and revise the quality assurance framework for the company and to modify and improve the existing production standards and Standard Operating Procedures (SOPs), when necessary.

5. To collaborate with all departments, customer, suppliers and government regulatory bodies to ensure that quality is a high priority in the company.

6. To drive projects and processes to ensure compliance with the various food safety and hygiene standards and requirements.

7. To lead and report on quality audits, identify and resolve problems highlighted in yield reports.

8. Ensure that all food safety, quality related and non-compliance issues are investigated and that corrective measures are implemented and adhered to.

9. Oversee of GMP and food safety training for Production personnel.

10. To be involved in the feasibility study for setting-up overseas factories.

11. To perform new product development from ingredient sourcing, laboratory and kitchen trials to commercialization, focusing especially in sauces.

12. To conduct continual improvement of existing products.

13. To conceptualize new and innovative products.

14. To source for new and alternative suppliers.

15. To conduct sensory evaluation and approval of new and/or alternative raw materials.

16. To prepare product costings based on raw materials and manufacturing costs.

17. Collaborate with the Marketing department to understand the customers’ needs and requirements and to also assist in troubleshooting customers’ technical issues (when necessary).

18. Ensure all product creation complies with customer, government and legal regulatory requirements within the country of use.

19. To conduct product stability and shelf-life studies of new products.

20. To develop innovative solutions to help grow and value-add to customers’ requirements, ensuring that any solutions provided are within the stipulated cost parameters and manufacturing capability.

21. To facilitate the handover of new product(s) so as to ensure the smooth transition from test kitchen to Production. This includes liaising with the Technical / Production Manager to ensure that the product development fits the site capabilities.

22. Ensure the cleanliness and orderliness of the laboratory.

23. Liaison with China customers and distributors to support China market.

24. Any other appropriate duties and responsibilities as assigned by the Management.

Report to BIM, Project Engineer / DfMA Manager.

Scope of assist in maintaining product quality within the factory.

Collaborate with the team to meet quality standards and objectives.

Maintain records of quality control activities.

Work closely with suppliers and vendors to ensure quality compliance.

Assist in quality investigations and problem-solving.

Participate in training and development opportunities to enhance you skills

Qualification:

• Diploma or above in Mechanical Engineering or a related field.
• NITEC/Higher NITEC in Mechanical Engineering or a related field may also be considered based on relevant experience and skills.

Requirements:

• Knowledge in both M&E services and DfMA Principles
• Familiarity with QA/QC process, tools and techniques.
• Knowledge in Industry Standards.
• Knowledge in BIM is an added advantage.
• Strong independence and good communication in English
• Able to work 5.5 days week

Fast progression position

• Progression-centric
• AWS included
• Variable Performance Bonus
• Annual Incentive Trip
• Further learning/education encouraged and sponsorships
• Flexible working hours and Work from home accepted on top of physical attendance

StemiGen Therapeutics is a Singapore biotechnology start up with a focus in the manufacturing of mesenchymal stem cells for clinical applications for regenerative medicine to meet the needs of aging societies worldwide. The company is seeking three suitable candidates to join the Team:

Job Responsibilities:

- Support superior in managing day-to-day operating expenditures against operating budgets to ensure efficient usage of resources.

- Support the design and development of quality procedures, processes, and standards to ensure alignment to quality policy and local regulatory guidelines.

- Provide technical assistance to production on quality and process improvements and perform troubleshooting when necessary.

- Responsible to write and/or update all relevant documentation for project activities.

- Support quality manager during internal and external audit.

- Conduct QC test for every batch of raw material, in-process and finished product.

- Execute the technical transfer and validation protocol for QC assays.

- Assist in the implementation of new assay methodologies and the associated instrumentation.

- Proper issuance and filing of documents in accordance with GxP documents.

- Perform equipment monitoring and basic housekeeping.

- Perform routine clean room sanitization task to maintain the cleanroom ISO standards.

- Identify and facilitate continuous improvements.

- Maintains inventory and submit purchase requests as needed.

- Any other tasks / projects assigned by supervisor.

Job Requirements:

- Degree in biomedical science/biotechnology or related discipline.

- 1 – 3 years working experience in QA/QC role or relevant work experience in similar manufacturing industry or cleanroom environment.

- Proven experience in cGMP, FDA regulations and ICH Guidelines regarding the manufacture of biological products.

- Good knowledge in quality assurance tools, concepts, and methodologies.

- Experience in writing and/or review of GxP documents to ensure good

documentation, data integrity, GxP and regulatory requirements are met.

- Experience in cell/gene therapy is preferred.

- Expertise in cell culture, flow cytometry and molecular biology.

- Self-initiated, able to work independently and in a team.

- Ability to communicate at all levels.

Welcome to the dynamic world of LAI Games, a leading Singapore-based game studio at the forefront of revolutionizing arcade entertainment. As a key player in the industry, we pride ourselves on crafting immersive and thrilling gaming experiences that captivate players worldwide. We develop our games in-house, often in collaboration with top-tier video game creators and integrating the newest hardware from renowned technology suppliers in our arcade games. We are dedicated to pushing the boundaries of innovation.

Join us on this exhilarating journey as we seek a hands-on Software QA Lead to strengthen our team in creating the next generation of thrills!

Our QA Engineers are the masters of our products – they know every mechanic inside and out, having been with the product every step of the way from prototyping to production.

What You’re Responsible For

• Create detailed, comprehensive, and well-structured test plans and test cases for web applications and games
• Estimate, prioritize, plan and coordinate testing activities such as release candidate testing
• Design, develop and execute automation scripts using open-source tools
• Identify, record, document thoroughly, and track bugs, including steps to reproduce them, possible causes and triage severity levels.
• Perform thorough regression testing when bugs are resolved
• Assist the development team with verifying bug fixes and deeper debugging of issues
• Take ownership of verifying release builds, ensuring that our products are released bug-free
• BE a positive and active contributor to the team by continuously looking for opportunities for improvement of processes and skills.

What We’re Looking For

• 3+ years of quality assurance, ideally in Games development and/or Web Application development.
• 2+ years of experience in Games development and/or Web Application development.
• Ability to lead a team of testers.
• Experience in C/C++, C#, Python, React, experience with Unity, Unreal.
• Familiarity with automated testing suites such as Selenium, Playwright, Pytest.
• Great attention to detail
• Experience with smoke testing, regression testing, stress testing, exploratory testing and testing edge cases, corner cases, etc.
• Solid planning, documentation, problem solving and critical thinking skills.
• Familiarity with software development methodologies including Agile, and experience working in Agile environments, version control systems, software test frameworks, and software testing techniques.
• Strong analytical thinking and problem-solving skills and a commitment to delivering high-quality results.
• Able to work autonomously.
• Excellent communication skills and the ability to collaborate effectively with multidisciplinary teams.
• Able to work under tight deadlines and respond to changing business and technical conditions.

Qualifications / Education

• Bachelor’s or master’s degree in computer science, computer engineering, or equivalent field.

Besides working with an awesome team, in an arcade, and making games, we also offer:

• Competitive salary
• Performance bonus
• Training and education programs
• Private medical, dental, and life insurance coverage
• Flexible working hours
• Quarterly self-directed personal development days
• Finish work early every Friday afternoon for social drinks and games
• Work in a dynamic, creative arcade/workspace
• Team events - being a part of the out-of-home entertainment industry, we like to have frequent team events and enjoy what the industry has to offer

LAI Games is a global company committed to growing our employees along with the business. We’ve worked hard to foster an intensely collaborative and creative environment, a diverse and inclusive employee culture, and training and opportunities for professional growth.

Job Responsibilities
- Organize and lead the team to accomplish the quality goals
- Recruit qualified talent and improve team building & development
- Focus on optimizing the holistic team workflow and achieve efficient cooperation across teams.
- Work with the quality control team and external partners to maintain high quality support
- Deal with dynamic and fast-paced environment and make decisions with ambiguous information
- Responsible for ensuring quality in game development and operation

Requirements
- Bachelor’s degree or higher in Computer Science or related
- Proficient in a programming language (C++,C,C#,php,Python).
- 10+ years Quality Assurance experience, with 5+ years managing in-house testers
- Experience with game testing, including functional testing, frontend and backend performance testing, adaptability testing, etc.
- Experience in overall project testing design and management
- Experience in working with testing teams and experts remotely
- Ability to work under pressure, having strong interest in and passion for games.
- Ability to quickly pick up and implement new technical skills
- Excellent communicating skills and coordination abilities

Job Highlights

• Location: Hybrid-Working; Work-from-Home/ Changi Naval Base/ Penjuru
• Job Type: Permanent
• Work Hours: 9am to 5pm
• Working Days: Monday to Friday
• Transport Allowance provided

Job Descriptions

Tester & Quality Assurance

• Conduct manual and automated testing of software applications to ensure functionality, performance, and security meet requirements.
• Identify, document, and track defects and bugs, and follow up with developers for resolution.
• Assist in developing and executing test plans, test cases, and test scripts.
• Perform regression, integration, and system testing.
• Collaborate with developers, business analysts, and other stakeholders to understand requirements and testing needs.

Collaboration & Support

• Provide feedback on user experience, usability, and functional design during the testing process.
• Support the project team in resolving documentation and testing-related issues.
• Participate in team meetings to discuss project progress, risks, and issues.

Required Skills & Qualifications

• Diploma in Computer Science, Information Technology, or a related field (or equivalent experience).
• Basic understanding of software development and testing principles.
• Familiarity with testing tools and methodologies (e.g., Selenium, JIRA, or similar).
• Strong attention to detail and organizational skills.
• Excellent written and verbal communication skills.
• Ability to work collaboratively in a team environment.