Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Brief description

You will be involved to implement and maintain a reliable quality control system to guarantee high quality products and solutions output from the company, and to plan and schedule its manufacturing order outputs.

Tasks

• Plan, and schedule all manufacturing orders, and prototyping activities in accordance to order priority,

• Ensure all its manufacturing use equipment and tools are prior calibrated to acceptable standards and records,

• To check all incoming supplies for customer’s production meets the adopted quality acceptance standards,

• To ensure all production outputs at various stages of manufacturing processes exceeds &/or meet customer’s requirement,

• Conduct all out-going goods meet the stipulated IPC & customer Quality control standards,

• To observe, identify, recommend, and implement improvement for company overall quality assurance and control system,

• Conduct ISO9001 internal audits as when scheduled,

• Develop, conduct any relevant technical or IPC based trainings to Manufacturing staffs as when required,

• Conducts product / solution failure analysis as when required for internal/external orders

Qualifications and Requirement

• Minimal Advanced Technical Certificates, Diploma or Degree in Electrical or Electronics Engineering discipline.

• Relevant working experience is preferred.

• Hands-on attitude towards problem-solving is essential.

• Able to interpret and understand electrical and mechanical drawings / datasheet and charts accurately and independently.

• Familiar with ISO9001:2015 QMS, and Audit Matters

• IPC standards trained (specialist) certification is preferred, otherwise training shall be provided (training bond applies)

• Honest and Strict, and have Good interpersonal communication skills.

• Well organized, responsible, and always strive to meet production datelines.

• 5.5 days work week

Job Highlights

• Location: Hybrid-Working; Work-from-Home/ Changi Naval Base/ Penjuru
• Job Type: Permanent
• Work Hours: 9am to 5pm
• Working Days: Monday to Friday
• Transport Allowance provided

Job Descriptions

Tester & Quality Assurance

• Conduct manual and automated testing of software applications to ensure functionality, performance, and security meet requirements.
• Identify, document, and track defects and bugs, and follow up with developers for resolution.
• Assist in developing and executing test plans, test cases, and test scripts.
• Perform regression, integration, and system testing.
• Collaborate with developers, business analysts, and other stakeholders to understand requirements and testing needs.

Collaboration & Support

• Provide feedback on user experience, usability, and functional design during the testing process.
• Support the project team in resolving documentation and testing-related issues.
• Participate in team meetings to discuss project progress, risks, and issues.

Required Skills & Qualifications

• Diploma in Computer Science, Information Technology, or a related field (or equivalent experience).
• Basic understanding of software development and testing principles.
• Familiarity with testing tools and methodologies (e.g., Selenium, JIRA, or similar).
• Strong attention to detail and organizational skills.
• Excellent written and verbal communication skills.
• Ability to work collaboratively in a team environment.

Job Description

• Industry/ Organization Type: Manufacturing & Production
• Position Title: QA Executive/Senior QA Executive
• Working Location: Redhill (Near to the MRT)
• Working Hours: 5 days a week (Flexi Hours)
• Salary Package: Up to $5000 (Basic) + $88 (Fixed Allowance) + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Conduct regular quality assessments to troubleshoot and resolve issues with product functionality.
• Partner with R&D to evaluate new products or parts and generate detailed quality reports.
• Execute functional, performance, and reliability tests.
• Maintain compliance with Quality Management Systems, including ISO 9001.
• Provide expert QMS advice and lead continuous improvement efforts across all business units.
• Manage ESG projects from initiation to completion, aligning with corporate sustainability goals.
• Create and oversee project plans, timelines, and budgets, ensuring efficient resource coordination.
• Lead cross-functional teams to deliver projects on schedule and within budget.
• Perform additional duties as delegated by the team leader.

APPLY NOW!!!

• Bachelor’s degree in Electronic and Electrical Engineering.
• At least 2 years of experience in operations, quality, and engineering within the manufacturing sector.
• Proficient in Quality System Standards, including ISO9001, ISO14001, and ISO45001.
• Solid understanding of sustainability concepts, ESG frameworks, and current industry trends.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Responsibilities
- Organize and lead the team to accomplish the quality goals
- Recruit qualified talent and improve team building & development
- Focus on optimizing the holistic team workflow and achieve efficient cooperation across teams.
- Work with the quality control team and external partners to maintain high quality support
- Deal with dynamic and fast-paced environment and make decisions with ambiguous information
- Responsible for ensuring quality in game development and operation

Requirements
- Bachelor’s degree or higher in Computer Science or related
- Proficient in a programming language (C++,C,C#,php,Python).
- 10+ years Quality Assurance experience, with 5+ years managing in-house testers
- Experience with game testing, including functional testing, frontend and backend performance testing, adaptability testing, etc.
- Experience in overall project testing design and management
- Experience in working with testing teams and experts remotely
- Ability to work under pressure, having strong interest in and passion for games.
- Ability to quickly pick up and implement new technical skills
- Excellent communicating skills and coordination abilities

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

⇒ Role Summary

We are seeking a highly skilled and motivated JAVA Backend QA Automation Tester to join our dynamic team. The ideal candidate will be responsible for ensuring the quality and reliability of our backend systems through automated testing.

⇒ Main Responsibilities

• Develop, maintain, and execute automated test scripts for backend systems using Java.
• Collaborate with developers and other QA team members to design and implement test plans, test cases, and test scripts.
• Identify, document, and track bugs and issues found during testing.
• Perform regression, integration, and performance testing of backend services.
• Utilize automation frameworks and tools such as Selenium, TestNG, JUnit, and REST Assured.
• Contribute to the continuous improvement of the QA process, tools, and methodologies.
• Participate in code reviews and provide feedback to ensure testability and quality of code.
• Work closely with cross-functional teams to understand requirements and provide input on testability and quality.
• Ensure compliance with industry standards and best practices.

⇒ Qualifications & Experience

• Strong knowledge on JAVA programming.
• Proven experience in backend testing and automation using Java.
• Strong understanding of software development life cycle (SDLC) and QA methodologies.
• Proficiency in automation tools such as Selenium, TestNG, JUnit, and REST Assured.
• Experience with API testing and tools like Postman or SoapUI.
• Familiarity with version control systems like Git.
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills.
• Ability to work independently and in a team-oriented environment.
• Testing certifications (ISTQB) is a plus.

⇒ Transversal Skills

• Effective listening, communication and presentation skills.
• Strong ability to analyze and solve problems and/or suggest solutions.
• Strong appetite for non-stop learning.
• Dynamic, proactive, sense of initiative.
• Interpersonal skills to work with various cross functional teams.
• Ability to work independently and/or prioritize tasks in fast paced environment.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Responsibilities:

• Develop and implement quality assurance plans, standards, and protocols for production or project management.
• Review project specifications and engineering drawings to establish quality standards.
• Ensure all work complies with relevant codes, ISO standards and regulations.
• Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database.
• Identify and document any quality issues, non-conformance and corrective actions.
• Providing guidance and advice to the Project Manager on significant changes to the quality management system with direct impact on site operations.
• Training the production team on quality control measures to improve product excellence.
• Collaborate with production, engineering and project management teams to identify and implement process improvements.
• Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements.
• Conduct root cause analysis for site level NCRs and recommend corrective action and preventive actions.
• Overall knowledge of safety policies and procedures to achieve safe work practices.

Requirements:

• Diploma /Degree in Engineering, Quality Management or related filed.
• Minimum 5 to 8 years of working experience quality assurance/control in industrial /equipment production or engineering projects would be advantageous.
• Proficient in quality inspection tools, data analysis and report writing.
• Up to date knowledge of federal and industry standards and best practices.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Excellent problem solving and analytical skills.
• Keen attention to detail.
• Willingness to travel for site inspections.
• Able to work independently and a good team player.
• Candidate who can start work within short notice or immediately would be advantageous.

Responsibilities:

• Attends and records the daily quality assurance related inspections for mechanical and HVAC installations
• Coordinates with other production departments, clients, and surveyors for Inspection & testing requirements
• Assigns the systems to be tested to the various supervisors and technicians involved in the operation
• Ensures that the Quality work processes to enhance efficiency and productivity
• Reports on non-conformance and issue Improvement notes, where necessary
• Ensures timely completion of project
• Ensures that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements
• Any other assigned duties and responsibilities

Requirements:

• Degree in Marine and Offshore / Mechanical Engineering
• Minimum 5-10 years’ experience with 3 years in marine construction and installations
• Must have ASME PCC-1
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Supervise the effective implementation of all test and inspection schedules, ensure adherence to all procedures, and coordinate with various teams to perform quality audits on processes.
• Assist employees in ensuring knowledge of all quality standards, ensure compliance with all quality manuals and procedures, and collaborate with contractors and suppliers to maintain the quality of all systems.
• Manage to lift all equipment, handle the efficient storage of all hazardous materials, and perform quality audits per the required schedule.
• Monitor an efficient system, record all project activities, and analyze all processes to ensure all work meets quality requirements.
• Manage all work methods, maintain knowledge of quality assurance standards, monitor continuous application for all quality assurance processes, and recommend corrective actions for all operations.
• Develop a method statement for the activity, including risk assessment, job safety environmental analysis, and Inspection

Key Responsibilities

• Evaluate the suitability of new materials for product development in alignment with customer requirements.
• Ensure all incoming materials meet defined quality parameters.
• Preparing chemical formulations of new products.
• Conduct trial blends, assess results, and optimize formulations.
• Develop and evaluate product formulations based on test results and customer specifications.
• Ensure finished product test results comply with customer requirements.
• Maintain and develop quality assurance/control procedures to ensure product consistency and compliance.
• Oversee test method development, transfer, and validation to ensure reliable and accurate product testing.
• Provide technical support to the sales team, assisting with product knowledge and customer inquiries.
• Supervise and manage the issuance of job orders for production, ensuring product specifications are met.
• Supervise lab staff, ensuring productivity and adherence to quality standards.
• Conduct training on product knowledge, lab practices, and quality procedures to enhance team skills.
• Oversee the maintenance, calibration, and troubleshooting of laboratory equipment, ensuring efficient and accurate operations.
• Manage laboratory resources, including budgeting and resource allocation, to ensure operational efficiency.
• Enforce a strong safety culture in the laboratory, ensuring strict adherence to Health, Safety, and Environmental (HSE) regulations, protocols, and procedures.

Key Skills and Personsl Attributes

• Professional experience 11+ years, with relevant functional experience.
• Read, write and speaking ability of English and Mandarin is a must.
• Proven leadership and team management experience.
• Excellent problem-solving skills and attention to detail.
• Strong communication skills for cross-departmental collaboration and customer support.
• Knowledge of ISO 9001/14001/ HSE regulations and safety protocols.

Essential Criteria

• Bachelor's or Master's degree in Chemistry, Chemical Engineering, or a related field.
• Extensive experience in a laboratory environment with a focus on product development and quality assurance.
• Strong knowledge of chemical formulations, testing methodologies, and quality control standards.

Job Role

• Responsible for routine quality oversight on site GMP production and testing, ensure all GMP activities are executed following company procedures.
• Support to establish an effective quality system, ensure its healthy running in all GMP functions/ processes during daily operation.
• Ensuring procedures and other instructions/documents are reviewed and approved appropriately
• Ensuring starting materials, packaging materials etc. are sourced from approved suppliers and released per established procedures.
• Ensuring sufficient quality oversight on shopfloor, ensure manufacturing and testing activities are carried out according to established procedures;
• Ensuring premise, utilities and equipment are qualified and appropriate maintenance program is in place to maintain the qualification status
• Approve product specifications
• Batch disposition of drug substance and drug product
• Ensuring that each batch of medicinal products has been manufactured and checked in compliance with the regulations and internal procedures
• Ensuring all necessary testing is carried out and the associated records evaluated;
• Ensuring the appropriate process/ method qualification and/ or validations are carried out per internal procedure;
• Ensuring all quality event, e.g., deviation, change control, OOS, complaint etc. are thoroughly investigated and/or assessed, all necessary actions are in place
• Participation in regular management reviews of process performance, product quality and of the Pharmaceutical Quality System and advocating continual improvement;
• Ensuring stability program is completed per internal procedure
• Ensuring the completion of product quality review per internal procedure;
• Ensure starting materials, packaging materials, intermediate and products are stored under appropriate storage conditions
• Support internal and external audit.
• Participation of product recall or mock recall, when occurs
• Maintaining good relationship with clients QA
• Team management
• Other tasks assigned by the supervisor.

Requirements

• Bachelor degree or above, majoring in Biologics, Pharmacy, Pharmaceutical Engineering, Bioengineering or other relevant majors
• 15+ years’ working experience in production and/or quality management (QA/QC), with minimum 8+ years in manufacturing QA.
• 5-8 years’ experience in team management
• Be familiar with FDA, EMEA, PICS GMP requirement
• Familiar with Biological product manufacturing and quality control related requiement
• Experience with Biopharma commercial supple is preferred
• Experience with new site start up is preferred
• Prefer to have ADC manufacturing and quality management experience
• Familiar with quality management requirement throughout the whole product lifecycle, including process development, clinical and commercialization.

Job Description

• Industry/ Organization Type: Manufacturing & Production
• Position Title: QA Executive/Senior QA Executive
• Working Location: Redhill (Near to the MRT)
• Working Hours: 5 days a week (Flexi Hours)
• Salary Package: Up to $5000 (Basic) + $88 (Fixed Allowance) + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Conduct regular quality assessments to troubleshoot and resolve issues with product functionality.
• Partner with R&D to evaluate new products or parts and generate detailed quality reports.
• Execute functional, performance, and reliability tests.
• Maintain compliance with Quality Management Systems, including ISO 9001.
• Provide expert QMS advice and lead continuous improvement efforts across all business units.
• Manage ESG projects from initiation to completion, aligning with corporate sustainability goals.
• Create and oversee project plans, timelines, and budgets, ensuring efficient resource coordination.
• Lead cross-functional teams to deliver projects on schedule and within budget.
• Perform additional duties as delegated by the team leader.

APPLY NOW!!!

• Bachelor’s degree in Electronic and Electrical Engineering.
• At least 2 years of experience in operations, quality, and engineering within the manufacturing sector.
• Proficient in Quality System Standards, including ISO9001, ISO14001, and ISO45001.
• Solid understanding of sustainability concepts, ESG frameworks, and current industry trends.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description & Requirements

1. Support in inspection with CMM, i-Vision.

- FA Inspection

- First piece set up inspection

- Routine inspection (in-coming, in-process, out-going)

2. Fixture inspection (New fixture) to ensure acceptable usage.

- Inspection fixture

3. Support in CAPA/Root Cause Analysis for both internal and external quality issue.

- Data collection

- Data analysis

- Root Cause identification

- Solution establishment

4. Generate internal and supplier quality performance report.

- Monitoring of internal production quality issue

- Monitoring of sub-con/supplier quality issue

- Review, analyse and evaluate data on the above quality issue

5. Lead MRB review and disposition.

- Perform review on the rejection, evaluate and disposition of rework, scrap or UAI

6. Participate in supplier evaluation and qualification.

- General supplier management

- Supplier audit (new and existing supplier)

7. Support in audit (internal and supplier).

- Perform auditor role during internal audit

- Auditing of major supplier with high quality issue

8. Lead in internal calibration management.

- Keep track on the calibration due date and take initiative to recall for calibration

- Maintain internal IMTE to date

9. Support on Documentation Control.

- Inspection report

- Material Certificate

- Treatment COC

- Internal inspection record

- Perform GDP

10. Oversee quality activities and action plan.

- Arrangement of inspection priority

- Updating of inspection status

- Liaise with cross function on quality issue

- Problem solving through team work

11. Support QM to lead the Quality Department.

- Perform as a lead of Quality Department

- Take over the HOD role in the absent of QM

Further scope will be added as per necessary prior to changes of needs with reference of current capabilities, knowledge, skill and performance.

12. AS9100, ISO14001 capability.

- Understand all clauses of international standard.

- Execution of these international standard.

- Maintenance of organisation QMSJob Description & Requirements

13. Able to be outstation in Southeast Asia if required

Role Overview:

We are seeking an experienced QA Engineer with a strong background in the oil and gas sector, specifically in FPSO projects. The QA Engineer will be responsible for ensuring that all quality assurance and quality control procedures are in place, adhered to, and continuously improved throughout the project lifecycle.

Key Responsibilities:

1. Quality Management System (QMS):
   Develop, implement, and maintain the project-specific Quality Management System in alignment with ISO standards.
   Ensure compliance with company policies, client requirements, and regulatory standards.
2. Project QA Oversight:
   Conduct regular quality audits, inspections, and surveillance activities on FPSO project sites.
   Identify and document non-conformances, and lead the resolution process to prevent recurrence.
   Ensure that all QA documentation is properly maintained and accessible.
3. Supplier and Vendor Quality Control:
   Review and approve vendor QA/QC documentation.
   Conduct supplier audits to ensure compliance with project quality requirements.
   Coordinate with procurement teams to ensure that materials and equipment meet quality specifications.
4. Engineering & Fabrication Quality Assurance:
   Ensure that engineering designs, drawings, and specifications comply with quality requirements.
   Monitor fabrication and construction activities to ensure they are carried out according to approved procedures and quality standards.
5. Testing & Commissioning:
   Oversee testing and commissioning processes to ensure systems meet quality standards before handover.
   Verify that all test procedures and results are properly documented.
6. Risk Management:
   Identify potential quality risks and implement mitigating measures.
   Participate in risk assessments and HSE (Health, Safety, and Environment) meetings.
7. Training and Continuous Improvement:
   Provide training to project teams on quality processes and best practices.
   Promote a culture of continuous improvement by identifying opportunities for process optimization.

Qualifications:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 5 years of experience in a QA role within the oil and gas industry, with specific experience in FPSO projects.
• In-depth knowledge of quality management systems (e.g., ISO 9001) and industry standards.
• Strong understanding of fabrication, construction, and commissioning processes for FPSOs.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership skills.
• Certification in quality auditing (e.g., ISO 9001 Lead Auditor) is an advantage.