Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description:

• Ensure the quality of all construction work performed on site are in accordance with the company's QAQC requirement.
• Visit project sites, arrange and conduct QAQC inspections on mainly Structural Works and Architectural Works.
• Assist project teams on the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards.
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practises.
• Ensure that all project quality records and quality audit plans are maintained.
• Any other duties as assigned.

Job Requirement:

• Candidate must possess Bachelor Degree or Diploma in relevant discipline.
• Minimum 3 years of experience in construction/ civil engineering industry.
• Able to read and understand CAD, Revit/Navisworks software services in 3D model is essential.
• Have experiences in working in large scale projects.

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Our client is one of the leading medical manufacturers. Due to business needs, they are now recruiting a Quality Assurance Engineer to be part of their QA Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Quality Assurance Engineer:

• Maintain and update Quality Management System (QMS) procedures to ensure compliance.
• Verify process documentation, including work instructions, quality inspection plans, data sheets, and inspection reports.
• Lead and guide quality control inspectors to uphold compliance standards.
• Oversee in-process and final quality inspections, collaborating with internal teams to address manufacturing quality issues.
• Resolve process non-conformance issues promptly and effectively.
• Address customer complaints through containment actions, root cause analysis, and implementation of corrective and preventive measures.
• Manage documentation control systems and facilitate internal and external audits.
• Ensure timely completion of customer environmental surveys and related requests.
• Provide support for QA/QC activities, projects, and other ad hoc duties as needed.

Requirements:

• Min Diploma in related field
• At least 1 year of experience in Medical Manufacturing Industry, with exposure of ISO 13485 and ISO 90001

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

• To plan, coordinate and execute quality assurance and quality control of project
• To ensure all products are executed in accordance to contract specifications
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• Any other ad-hoc duties as and when assigned

Requirements

• At least 5 years experience in LTA MRT Projects

Summary of responsibilities:

• Responsible for executing tests as defined in the test plan. He/She will work closely with developers and stakeholders throughout the Product Development Lifecycle (PDLC). This includes planning, conducting tests, managing test cases, resolving bugs found during testing activities, ensuring there aren't any blockages during the testing process.

Responsibilities:

• Collaborate with developers, product managers, and other stakeholders to ensure high-quality software releases.
• Plan, develop and execute test plans and test cases for desktop and web-based applications.
• Perform manual and automated testing using tools like Selenium, Bash scripting and Python.
• Identify, document, and track bugs using bug tracking tools such as JIRA
• Conduct performance testing using tools like JMeter.
• Perform API testing using tools like Postman.
• Create and maintain test automation frameworks and scripts.
• Create tracking metrics to ensure each step of the testing process is documented and tracked.

Requirements:

• Bachelor’s degree in Information Technology, Computer Science, Engineering or equivalent.
• 5 to 10 years' of working experience in software build & release, software quality assurance, software testing, including at least 3 years in leadership role in planning and proposing QA test activities to stakeholders.
• Familiar with test methodologies, including functional and non-functional testing, regression testing, smoke testing, sanity testing, end-to-end testing, integration testing, and installation testing
• Strong understanding of manual testing methodologies and processes, with good exposure and hands-on experience to automation frameworks (e.g., Katalon Studio, etc).
• Expert level proficiency with QA tools (e.g., Selenium, JIRA, Postman) and performance testing tools (e.g., JMeter, LoadRunner).
• Familiarity with Agile and Scrum methodologies, along with scripting or programming languages (e.g., Bash, Python, JavaScript).
• Experience with and end-to-end QA for complex web applications.
• Proficiency in Java coding, Python and C++ would be beneficial.
• Familiarity with version control systems (e.g., Git, SVN).
• Experience on software build & release in both Windows and Linux environments.
• Excellent analytical thinking and attention to detail.
• Strong verbal and written communication skills.
• Ability to troubleshoot and resolve issues efficiently.

• Report daily to QNQC Coordinator/ Engineer and advise him on the client main contractor compliance to contract procedures and standards and any matters effecting quality
• Ensure documentation is clear, precise and accurate, and within the requirements of the applicable construction code and project specifications.
• Working knowledge of ASME SEC
• Perform visual inspection on welds for the following or as applicable
• Flag / identify any welds or items that require NDE to be completed, once completed, ensure this is documented, in case of any items that have had NDE completed and repairs are required
• Report and document internal & external Non-Conformances
• Perform field inspections and quality assurance of construction projects
• Provide daily construction reports and maintain up-to-date files of all construction documents
• Attend and participate in project meetings to keep Project Manager apprised of project progress, status, quality and schedule
• Identify and evaluate potential new observed hazards and implement controls as project's scope of work changes

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

We are partnered with an established organisation to look for a Test Automation Engineer on a permanent basis.

Responsibilities:

• Automation Design & Development: Creating automation designs and scripts to test product functionality.
• SDLC Participation & Collaboration: End-to-end testing and Interfacing with a diverse range of IT stakeholders (vendors, developers, business analysts, project managers, etc.).
• Test Planning & Execution: executing tests across various domains (systems, networks, applications, etc.).
• Continuous Improvement: Evaluating, maintaining, and improving automation systems for efficiency and effectiveness.
• User Acceptance Testing: Emphasizes documenting processes for ease of future modifications, assisting with User Acceptance Testing (UAT)

Responsibilities:

• Bachelor's Degree in Computer Science / Computer Engineering or equivalent
• At least 6 years of experience in Automation Engineering with a solid understanding of Testing Methodologies, frameworks and SDLC.
• Proficiency in Java, VBScript and automated scripts
• Experience working in an agile environment

Due to the urgency of this role, we are only considering candidates with existing working rights in Singapore.

If you are keen on this role and meet the qualifications, apply now or send your cv to [email protected]. We will arrange for a confidential chat if your profile aligns.

If you do not hear from us within 2 working days, please take this as a notification that you have not been shortlisted.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: Manufacturing & Production
• Position Title: QA Executive/Senior QA Executive
• Working Location: Redhill (Near to the MRT)
• Working Hours: 5 days a week (Flexi Hours)
• Salary Package: Up to $5000 (Basic) + $88 (Fixed Allowance) + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Conduct regular quality assessments to troubleshoot and resolve issues with product functionality.
• Partner with R&D to evaluate new products or parts and generate detailed quality reports.
• Execute functional, performance, and reliability tests.
• Maintain compliance with Quality Management Systems, including ISO 9001.
• Provide expert QMS advice and lead continuous improvement efforts across all business units.
• Manage ESG projects from initiation to completion, aligning with corporate sustainability goals.
• Create and oversee project plans, timelines, and budgets, ensuring efficient resource coordination.
• Lead cross-functional teams to deliver projects on schedule and within budget.
• Perform additional duties as delegated by the team leader.

APPLY NOW!!!

• Bachelor’s degree in Electronic and Electrical Engineering.
• At least 2 years of experience in operations, quality, and engineering within the manufacturing sector.
• Proficient in Quality System Standards, including ISO9001, ISO14001, and ISO45001.
• Solid understanding of sustainability concepts, ESG frameworks, and current industry trends.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Key Roles & Responsibilities

The Snr Executive / Asst Manager will support the Vice President (Systems and Quality Assurance) in implementing and managing the Company's Excel QA framework, School Management Model (SMM) Knowledge Repository, EduTrust compliance and data protection across the organisation.

Company's Framework & SMM Knowledge Repository

1. Assist in the development, management, and implementation of the SingEdExcel framework across schools.

2. Support the Vice President in monitoring, reviewing, and evaluating the effectiveness of the framework and the knowledge repository.

3. Coordinate with school leaders and staff to ensure effective adoption and implementation of standardised policies and procedures.

4. Maintain documentation of all policies and procedures, ensuring they are up-to-date and accessible in the knowledge repository.

5. Assist in organising professional learning sessions for school leaders on the SingEdExcel framework and SMM Knowledge Repository.

EduTrust Compliance & Support

1. Support the Vice President in serving as an internal assessor for schools preparing for EduTrust certification.

2. Assist in reviewing EduTrust-related documents.

3. Coordinate and manage documentation and evidence gathering for the EduTrust certification renewal exercise.

Data Protection Compliance

1. Assist in the development and implementation of data protection policies and procedures.

2. Support in conducting data protection risk assessments and audits across all schools.

3. Monitor compliance with data protection laws and regulations and report findings to the Group DPO.

4. Coordinate data protection training and awareness programmes for staff.

5. Maintain comprehensive records of data processing activities and assist in the preparation of reports on data protection compliance.

Job Specification

• Recognised bachelor’s degree in Education, Business Administration, Quality Management, or a related field.

• Minimum of 3 years of experience in quality assurance, compliance management, or a related field.

• Minimum of 1 year of experience with data protection and privacy laws, and their implementation in organisational processes.

• Knowledge of quality/compliance management systems and frameworks (e.g., EduTrust, ISO 21001) is essential.

• Experience with quality improvement initiatives and system implementation is highly regarded.

• Strong analytical skills and attention to detail, with an aptitude for data review and analysis.

• Prior experience in the education industry is preferred.

• Proficiency in Micros

Profile of Competency

• Excellent communication skills.

• Ability to work independently and as part of a team.

• Ability to manage multiple projects simultaneously.

• Ability to work under pressure and meet deadlines.

• Commitment to continuous improvement.

• Passion for education and school improvement.

• Understanding of local and regional data protection laws and best practices.

• Ability to manage and implement data protection projects within set timelines and budgets.

• Commitment to maintaining the highest levels of integrity and confidentiality.

Other Professional Qualifications

• Completion of relevant training programmes in data protection and/or privacy laws.

• Any additional certifications in quality management or project management will be beneficial.

Industry: Education / International schools

Working hours: 8.30am to 5.30pm / Mon-Fri

Jessie Hoe Huey Miin

CEI R1103861

EA: 99C4599

Roles & Responsibilities:

• Establishing work procedures, instructions and monitor performance and control of workmanship towards quality.
• Ensure sub-contractors and suppliers comply with project’s QA/QC requirement and manage project quality to ensure compliance to codes, standards and regulations.
• Carry out audit processes, review procedures, and ensure compliance with industry standards.
• Carry out various inspections and tests on the materials, products and components during various stages and completion of construction.
• Identify areas for process improvements, implement best practices and ensuring ongoing compliance.
• Maintain records of inspection results, deviations and corrective actions taken to ensure traceability and accountability.
• Initiate corrective actions to resolve the issue and prevent recurrence when defects or non-conformities are found.
• Review client’s complaints relating to QA/QC matters.
• Preparing and maintaining detailed reports on quality performance.

Requirements:

• ITE / Diploma in engineering or equivalent.
• At least 5 years of working experience in the local construction industry.
• Good communication and interpersonal skills.

Job Highlights:

• Professional Growth
• Collaborative Environment
• Positive Company Culture

Job Descriptions:

• Planning and preparing test cases and test scenarios based on the project requirements and specifications.
• Executing test cases and scripts to identify defects or bugs in the software.
• Reporting defects or bugs found during the testing process to the development team and tracking them until they are resolved.
• Collaborating with the development team to identify the root cause of defects and assist in fixing them.
• Conducting functional, integration, performance, regression, and user acceptance testing to ensure that the software is meeting quality standards.
• Participating in code reviews and suggesting improvements to the development team.
• Developing and maintaining test plans, test reports, and other documentation related to the testing process.
• Providing feedback to project managers and stakeholders on the software’s quality and testing progress.
• Staying up-to-date with industry trends and best practices in software testing and quality assurance.
• Perform tasks assigned by direct supervisor.

Requirements:

• Degree in Information Technology, Computer Science, or equivalent relevant experience
• Preferably with 3 years experience in IT infrastructure field.
• Technical skills:Strong understanding of software testing methodologies (functional, regression, performance, and user acceptance testing), tools, and techniques; experience with automated testing tools and frameworks such as Selenium, Appium, or Cucumber; ability to develop and execute automated test scripts; ability to identify, document, and track software defects and issues; experience with agile development processes and methodologies.
  
• Pre and post deployment testing: You should have experience testing software both before and after deployment to ensure compatibility and functionality.
• Familiarity with programming languages: While not a requirement, familiarity with programming languages such as JavaScript, Java & Golang can be helpful in understanding the software development process and identifying issues.
• Database testing: Experience with database testing is a plus, as many software applications rely on database functionality.

Our esteemed client, an established MNC, is searching for a QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• Review and clarify test requirements.
• Execute testing based on the test cases.
• Perform the exploratory test and clarify the test procedure when needed.
• Perform troubleshooting and identify root causes for the issues and report the defects.
• Record and document results.

• Minimum Diploma in Computer Science or relevant studies
• Minimum 1 year of software or prototype testing

We love building HR software. And surely we can do better – with your help.

What We Value:

• You have initiative and are innovative
• You seek ownership in your work
• You have passion and ambition
• You love challenges and look for responsibilities
• You have a sense of humour (we love a good joke)
• You possess good English written and spoken communication skills

Responsibilities

• Create, maintain, and execute automated regression test suite for mobile and web applications
• Develop and maintain test plans, testing strategies, test cases, test data, matrices, and other QA related documentation
• Work with the Engineering Team to continuously improve test coverage to improve quality of released products
• Keep up to date on the latest tools, industry trends and technologies for software testing and put them to good use!

Requirements

• Degree/Diploma in Information Technology, Computer Engineering, Computer Science or related fields
• MUST HAVE:

1. At least one (1) year of experience in test automation experience
2. At least one (1) year of experience working in an agile environment.
3. Familiar with at least 1 test automation tool software (e.g. testsigma, selenium, Telerik, etc.)
4. Strong understanding of Software QA methodologies best practices to design, build and execute unit, functional and integration test cases
5. An independent, resourceful, result-oriented and analytical thinker.
6. Experience with Git and Jira
7. Strong oral and written English communication skills

We appreciate people who are constantly working towards improving themselves. If you ever find yourself facing an issue, as a team, we’ll find the solutions together.

When’s a better time to join HerdHR and shape the product of the future? We say NOW.

NOTICE

We regret to inform that only shortlisted candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read and agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Consequences of Not Providing Personal Data for Transaction/Service/Application

Please be noted that should you not consent and provide use with the relevant personal data to fulfil the “Purposes” of collection, use and disclosure of your personal data by HerdHR, it may hinder our ability to continue to interact with you. We may not be able to make a decision on your recruitment and employment or comply with the law and therefore, we may not be able to make an offer of employment

You may refer and access our website for more information.

Temus was established by Temasek in partnership with UST, to provide digital transformation solutions for the private and public sectors as we aspire to be a strategic partner in realising the Singapore Government’s Smart Nation vision. We are headquartered in Singapore and have more than 400 employees across a wide range of disciplines in strategy, design, architecture, technology, data & AI.

Job Overview:

We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic technology team. In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes.

Key Responsibilities:

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

Job Qualifications:

• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.
• Strong analytical and problem-solving abilities.
• Excellent communication skills, both verbal and written.
• Ability to work collaboratively in a fast-paced, agile environment.
• Leadership qualities with the ability to mentor and guide team members.

Job Objectives

• Establish DSSG Quality Management System (QMS) in GMP QA through review and improvement of operational process, and ready for obtaining the importation license and new product launch.
• Promote GMP/GDP QA activities and enhance QMS. As a result, contributed to the stable supply of the highest quality products and DS's business success.
• Assist in assuring the quality of products allying with each local QA in Asia.
• Enhance Global QA management and activities (Global SOP, QMS, Fostering Quality Culture, Training, Corporate GMP Audit etc.)

Job Responsibilities:

• Support Head of GMP-QA Office, and report QA activities to the head of GMP-QA.
• Perform QA for Imported Finished Products and CMO / Logistics management (Review QC report & Product release, Deviation, Change control, Complaint, Product Recall, Return, Improve quality issues, Maintain QA agreement, Enhance DI), GMP/GDP audit, appropriate document management including SOP.
• Market delivery release
• Enhance DSSG QMS allying with DSG company regionally / globally
• Contact with Authority if necessary
• Support DS group company activities
• Contribute to enhance Global QA management and activities (Global SOP, QMS, Fostering Quality Culture, Training, Corporate GMP Audit etc.)

Job Specification:

Technical Skills

• B. degree or higher in Pharmaceutical or related science categories
• Language: English and Chinese or Japanese
• GMP-QA Management including product release (5 years)
• QMS (Quality Management System) Management / experience of operating eQMS is preferable
• Bio knowledge preferred (to prepare for further ADC)
• General PC operation (Word, Excel, PPT preparation)

Soft Skills

• Logical Problem-solving
• Decision making
• Communication
• Leadership,
• Collaboration and Teamwork,
• Adaptability,
• Time management,

We are looking for passionate QA Assistant (Food Safety) to be part of the department expansion! You will be responsible for all hygiene and food safety standards of assigned locations.

If you are looking for a fulfilling career with Singapore's No.1 Events Caterer, send us your application now!

Responsibilities

• Conduct daily on-site inspection, personal hygiene checks, products checking and sample retention.
• Follow and assist in lab test sampling schedule
• Assists in ISO 22000:2018 manual updated, and implement to operation.
• Responsible for the compliance with MUIS Halal Standards, application and renewal of Halal Certification.
• Assists in checking records, documents, and files.
• Attended to external auditors and internal auditors; assist for internal audit (central kitchen, retail outlets and supplier audit)
• Attended to pest programmes, follow up and rectification.
• Follow and enhanced developed SOPs
• Assist in develop food safety training materials and assessment plan.
• Detect any non-conformance and rectification immediately.
• Any other ad-hoc projects assigned by superior.

Requirements

• A level, Diploma or equivalent, in Food Science/ Technology/ any related standard
• Possess knowledge in SFA regulation, ISO 22000, Halal/ any other related standard
• Able to multitask and work within timeline
• Good communication skills
• Team player, proactive and meticulous in work
• Willing to work in the West

The level of appointment offered will commensurate with candidate's experience.

Interested applicants are invited to apply with your detailed resume via the “Apply Now” option.

We thank you for your interest and regret that only shortlisted candidates will be notified.

Job summary:
Experience in marine and oll & gas sector.
Responsible for the assigned customer account, to ensure all product quality, process quality andsystem quality to conform with customers' specifications and internal quality system reauirements

Roles & Responsibilities:
1.To liaise with Customer Quality representatives on all Quality matters.
2.Lead the investigation on all Customer Quality Feedback, Complaints and CAR with internal cross.functional team for comprehensive root cause failure analysis and ensure closure with effectiveimplementation of corrective actions and preventive actions.
3. Monitor product quality performance and generate quality reports; chair monthly product qualityimprovement meetings to reduce the customer reject and field return rate for continual improvement!Identify Quality lmprovement projects and initiatives to drive Customer Satisfaction with Quality.
4.Establish with customer representative and internal team on New Product Quality plans, procedureswork instruction for overall auality control and coordinate implementatilon and maintenance of suchplans, procedures or instructions; conduct quality training/ cross training for QA inspectors.
5.Audit customer fabrication line for compliance to applicable standards and procedures in QMs andEMS

58 RECRUITMENT PTE. LTD

19C9772

67026282

Job Highlights

• Well versed in ISO 9001, QA metholodogies & tools
• Scope to innovate & develop continuous improvement processes

Job Description

• Develop & implement QMS system & take the lead of continuous improvement process & initiatives
• Provide root cause analysis & preventive action plans to resolve non-compliance issues
• Analyze internal & external data to identify areas for improvement & communicate with relevant parties for quality improvements
• Ensure the compliance with ISO 9001 & all relevant standards to both internal company policies & customer standards
• Maintains and implements the Quality Management System (QMS) for the organization.
• Manages Quality Assurance and Quality Control (QA&QC) by conducting audits for quality system conformance, and by liaising across departments to maintain good documentation control and management.
• Conducts investigations into inconsistent quality processes and non-conformance and recommends preventive actions to eliminate recurrences of such issues.
• Monitors product failure data and performance trends, and initiates remedial actions with relevant departments, where necessary.
• Identifies opportunities and prepares recommendations for continuous improvement in quality, productivity and cost efficiency.
• Handle Customer Complaint resolution, onsite & offsite
• Lead supervise OQA production lot acceptance and FAI submission team for achieving OTD objective.

Job Requirements

• Diploma/Bachelor Degree in Precision Engineering, Mechanical, Quality, Engineering or equivalent.
• Meticulous, thinks systematically and is able to work independently.
• Possesses good organization, problem-solving, interpersonal and communication skills.
• Good knowledge of Quality Management System and ISO 9001-2015. Certified Auditor will be a plus.
• Knowledge of LEAN Six Sigma and 8D Discipline methodology highly desirable.
• MS Excel, PowerPoint a MUST and ERP knowledge an advantage.
• Only Singaporean may apply.