Responsibilities

• Ensuring all sub-contractors comply fully with the relevant recommendations of LTA M&W requirements
• Preparing and submitting the Weekly & Monthly Quality reports.
• Follow up with conformity certificate, calibration certificate and plant calibration certificate from other agency.
• Maintaining the RIN Register and follow up with QPS for closing.
• Review daily inspection report and issuance of observation or NCR (Non Conformity Report) according to concerned department.
• To arrange QPS for inspection including the reinforcement cages, sitting out, guide wall, slurry quality (powder moisture, slurry density, viscosity & gel strength), final depth pf trench,trench profile check (koden alignment check), stop end, inserts, concrete slump, temperature, casting duration, cut-off level, ground level, backfilling (LSS) and lean concrete.
• To be physically present during Asphalt pavement work for Road diversion work.
• Study Shop drawing and liaise with design department on the design issue that may cause difficulty in production.
• To conduct mould inspection for every new mould and mould in use.
• Materials ordering
• To arrange production based on Daily Production Planning from planning department.
• Responsible for achieving the daily planned volume/productivity.
• To prep our inspection together with production supervisor and RTO

Requirements

• Degree in any Engineering Discipline
• Minimum 5 years experience in QA/QC works in railway construction, with at least 1 year LTA MRT experience.
• Experience in structural steel works or precast RC works
• Good interpersonal skills and communication skills
• Open to 6D work week with long working hours to meet tight project deadline.

Position: QA/QC Assistant (Job ID: 19415)

• AWS + Variable Bonus

Company: Trading Company

Location: West

Job Description:

➤ Carry out daily hygiene inspection to ensure stringent reinforcement of food hygiene safety in practice.
➤ Perform routine quality checks on raw materials, in-process products, and finished goods.
➤ Prepare and maintain relevant food safety records.
➤ Ensure microbiological laboratory carried out are according to Companies and Governments’ regulatory standards.
➤ Assist in monitoring production processes to maintain quality control and food safety guidelines.
➤ Assist in customers’ feedback and discuss with relevant departments on the corrective and preventive actions required.
➤ Assist in internal/ external and regulatory audits.
➤ Assist with maintaining quality documentation, ensuring all records are up-to-date and accurate.
➤ Ensure sanitation practices and pest control system are in place at all times.
➤ Work closely with production staff to foster a culture of quality and continuous improvement.
➤ Other ad-hoc duties as assigned from time to time.

Job Requirements:

➤ Minimum Diploma/ Advanced/ Higher/ Graduate Diploma, Bachelors’ Degree in Food Science/ Technology.
➤ Minimum 1-2 years of experience as a QA/ QC role in Food Manufacturing industry would be preferred.
➤ Strong attention to detail with excellent documentation and organizational skills.
➤ Ability to work well in a fast-paced environment and handle multiple tasks.
➤ Ability to work independently and as part of a team.
➤ Proficiency in English and Mandarin to liaise with Mandarin speaking production staffs and associates.

Interested applicants please send your resume to Jing Ling with email subject header “Job Application for QA/QC Assistant (Job ID: 19415)”.

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.
http://www.pasona.com.sg/privacy.html

Tan Jing Ling

EA Registration No: R24124404
Pasona Singapore Pte Ltd
1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246
Direct: +65 6239-4223 | General: +65 6732-6933 | Fax: +65 6733-2761
Email: [email protected]

URL: www.pasona.com.sg

EA License No:90C4069

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Product Executive (QA/UAT)

Location: Midview

Salary: Up to $3,800

Testing & Quality Assurance (Information & Communication Technology)

We are seeking a skilled individual with experience in User Acceptance Testing (UAT) and Quality Assurance (QA) to enhance the stability and reliability of our application. This role involves being the primary point of contact for identifying and verifying bugs and issues, effectively communicating with the development team to address these concerns and conducting thorough UAT before each app release. The ideal candidate will possess a keen eye for detail, strong problem-solving abilities, and the capacity to work collaboratively with technical teams to ensure the highest quality of our software products. This is an opportunity to play a pivotal role in maintaining and improving our app's performance, directly impacting user experience and satisfaction.

Responsibilities:

Candidates will be responsible for performing functional front-end testing across iOS apps, Android apps, and web platforms. The goal is to ensure products meet the highest standards of quality and reliability, with a focus on testing user interfaces, workflows, and responsiveness to maintain cross-platform consistency and adherence to specifications.

The role involves developing and documenting detailed test plans and test cases that align with business requirements and user stories. Candidates should be proficient in executing these plans efficiently, optimizing test coverage, and identifying key areas for focused testing.

Candidates will conduct thorough regression testing to ensure new features and bug fixes do not affect existing functionality. This requires proactively identifying potential risks and collaborating with internal teams to prioritize and resolve issues.

Strong attention to detail is essential for identifying UI/UX inconsistencies and technical bugs. Candidates should possess excellent problem-solving skills to investigate and pinpoint technical issues effectively.

Candidates will document bugs in issue tracking systems (such as Jira), writing clear and concise reports, and ensuring timely communication with both technical and non-technical stakeholders. They will be responsible for following up on issues until they are resolved and validating the fixes.

Excellent communication skills are required to bridge the gap between technical and non-technical teams. Candidates must ensure critical information is relayed clearly and promptly, facilitating decision-making during product releases and major updates. Strong interpersonal skills are necessary to work in a collaborative environment and manage competing priorities.

Candidates are expected to contribute to the continuous improvement of internal QA processes by identifying areas for efficiency gains and implementing best practices in testing and documentation.

Finally, candidates should become proficient in all internal tools and stay up to date with evolving product features. They will also be responsible for creating training materials and documentation to support team knowledge sharing.

Qualifications and Requirements:

• Bachelor's degree in a relevant field, such as Computer Science, Product Management, or a related discipline.
• Proven experience in quality assurance and testing of mobile applications, with a strong grasp of QA methodologies and tools.
• Experience working in Agile/Scrum or DevOps environments.
• Experience with software testing tools, such as Jira.
• Solid experience in defining product specifications, user stories, and acceptance criteria.
• Exceptional communication skills to collaborate effectively with cross-functional teams, including developers and designers.
• Proficient in both written and spoken English
• Strong problem-solving abilities and the capacity to identify, analyze, and communicate technical issues.
• Detail-oriented with a dedication to delivering high-quality products to our users.
• Excellent organizational skills to manage multiple tasks and projects concurrently.

Interested applicants may apply, alternatively you may send in your CV to bexlyn.chiu[at]revup-proservices.com

Bexlyn Chiu

R1985241

EA 24C2366

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Responsibilities:

• Maintain and adopt Agile best practices and lifecycles for process workflows (e.g., Kanban, CI/CD)
• Collaborate with business users and business analysts to refine and understand both functional and non-functional requirement during SIT & UAT stages.
• Develop automated test scripts to validate functional and technical requirements in data processing pipeline and to perform data quality checks
• Collaborate with data analysts in profiling data and monitoring data trends
• Collaborate with Developers/DevOps Engineers on code management, peer review, continuous integrated testing in CI/CD pipelines
• Assure quality at different phases of SDLC by adhering to process and strategies defined by Eastspring IT
• Execute manual / automated / exploratory tests and provide QA sign-off to business users for releases
• Maintain test process, design and execution artifacts in test management system complying the audit regulations
• Prepare testing traceability reports and other testing metrics.

Requirements:

• Recognized degree or higher in Computer Science or related Engineering fields.
• At least 7-10 years of working experience in Test Automation, using test frameworks for Database (ETL Testing) and Data analytical testing.
• Working knowledge in testing Data management platform tools same-as/similar-to ‘Golden Source’
• Sound knowledge in Java programming, SQL queries and Cucumber (Java) testing framework.
• Good knowledge in testing scheduling/orchestration tools (like Control-M, Azure Data Factory)
• Working knowledge of relational databases and comfortable with testing SQL jobs and stored procedures with awareness of data security.
• Basic understanding of data quality, profiling, and analytics concepts.
• Working experience with test management tools such as Jira with Xray / Zephyr
• Working knowledge of tools such as bitbucket, Jenkins, confluence and familiar with Git branching model
• Working experience in Agile projects, Behavior Driven Development (BDD) approach to software development and testing.
• Good to have basic programming knowledge in Python
• Good to have knowledge of Azure cloud platform.
• Good to have working experience in investment Bank or Asset Management industry.

Interested applicants, please Email , and look for

Jensen Fang Lifa

Recruit Express Pte Ltd

EA License No. 99C4599

EA Personnel Registration Number: R2197080

We regret that only shortlisted candidates will be contacted.

Responsibilities

Mechanical

• Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
• Monitors and ensure all mechanical works are carried out according to the latest revision mechanical drawing and complies with contract specification, class requirements and quality management system.
• Arranges coordinate and carry out all the inspection inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
• Performs material equipment incoming are as per Vendor document;
• Verifies tools and equipment used are as per procedures;
• Familiarizes with mechanical inspection process;
• Verifies NDT are done as per approved NDT plan & procedures.
• Verifies preservation are being performed as per preservation plan & procedures.
• Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
• Prepares review and document inspection records, certificates and NDT reports for the submission to relevant party.
• Checks and endorse inspection record prior to issue to customers.
• Ensures subordinates comply with company’s procedure and work instructions.
• Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
• Implements and compile the monthly key performance indicators (KPI) related to mechanical.
• Verifies mechanical MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.

Dimension Controller

• Implements dimensional control methods and procedures throughout the fabrication and integration process of the modules to meet the requirements of project specifications and codes.
• Conducts dimensional checking using latest electronic total stations before and after welding of the main deck frame and main column of the modules to ensure that the dimensions are within specifications.
• Reviews design drawings, do necessary best fit calculations, prepare professional dimensional control reports using AutoCAD and get approval by the clients and/or certifying authority.
• Maintains dimensional survey equipment and keep proper documentation of dimensional control reports to meet project requirements and QA/QC audit standards.
• Gives guidance and advice to sub-contractors on how they can increase their productivity.
• Liaises with key stakeholders including Client on the dimensional control methods, acceptance criteria in accordance to project requirements.
• Prepares and compile final dimensional control survey reports as part of the final documentation report.

Electrical

• Takes charge of projects, coordinate and carry out all E& I QA/QC activities for the projects including hazardous zone equipment’s inspection (ATEX/CompEx/IECEx Certified).
• Review and evaluate the drawings as per Classification Societies and Client’s requirement.
• Prepares the QA procedures and get it approved with Classification Societies and Client.
• Witness the testing of HV/LV circuit breaker/starter, neutral earthing resister/fuses and cable megger-ing.
• Coordinates all termination inspection of electrical installation of equipment.
• Preparations of electrical or mechanical completion for equipment.
• Carries out the inspection and testing with Class Surveyors and Class Representatives.
• Ensures all quality control documents are compiled and information’s are handed over for as-build.
• Coordinates daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Monitors and ensure all work is carried out according to the latest revision electrical drawing and complies with contract specifications, Class requirements and Quality Management System procedures.
• Checks and endorse inspection record prior to issue to Client.
• Ensures subordinates comply with Company’s procedure and work instruction
• Reports any non-conformance (NC) and issue Corrective Action Request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
• Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
• Implements and compile the monthly Key Performance Indicators (KPI) related to electrical and instrumentation.
• Verifies electrical and instrumentation MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.
• Performs others duties as signed by the superior(s) from time-to-time.

Coating

• Goods knowledge of all international surface preparation standards, painting/coating application standards, inspection standards, contract, specifications, material technical data sheet, material safety data sheet, documentation etc.
• Witness prequalification of painting system, painter, blaster and adhesion testing subjected for project approval before commencement of painting activities.
• Coordinates in-coming coating materials (e.g. paints, thinners, abrasives etc) conditions, data sheet and batch certificates in accordance with project.
• Inspects correct type of blasting equipment and tools to be used to meet the paint quality according to the paint specification.
• Inspects pre-cleaning or solvent cleaning of surface, metal surface imperfection/defects, surface profile of blast cleaned surface using right inspection tools.
• Assesses surface cleanliness soluble salt contamination on blast-cleaned surface and related test such as pull-off test & reports.
• Able to handle painting inspections in blasting and painting inspection of tank coatings, ship hull painting, and structural items
• Coordinates Request for inspection (RFI) to third party and client paint inspectors on hold point and witness point as per project inspection test plan (ITP).
• ·Able to send enquiries to Paint manufacturers for Painting Specification in accordance with project Requirements and Secure Quality document for painting; Inspection & Test plan, blasting and coating procedure.
• Ensures calibration certificates of painting instruments are valid & available for reference
• Supervises the workplace and workers safety.
• Ensures coating is practical and in accordance with the specified requirements by preparing or reviewing drawings, specification, job instruction and material selection notes etc.
• Reviews Inspection Test Plan (ITP) as per project specification and procedures
• Coordinates and perform Coating inspection of structural, piping and outfit works etc. of the assigned project as per approved ITP.
• To monitor all painting/coating related works and ensure all final products meet project specification requirement.
• Conducts surveillance inspection of surface preparation, paint mixing, WFT, DFT adhesion and curing of paints.
• Coordinates with yard QA/QC team for all quality documentation submission to SCM with the construction completion.
• Conducts onsite audit as per relevant specification and customer requirement.

Structural

• Takes charge of project and carry out all QA functions for the assigned project.
• Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
• Monitors and ensure all piping works are carried out according to the latest revision piping drawing and complies with contract specification, class requirements and quality management system.
• Coordinates all the inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
• Materials verification done with the specified mill certificates and codes;
• PMI testing on incoming, welder material;
• Verifies material use on sites are approved project materials;
• Familiarizes with piping inspection process;
• Verifies NDT are done as per approved NDT plan & procedures.
• Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
• Ensures project documents including inspection, traceability records, certificates, radiography films, and NDT reports are submitted to relevant party to signing.
• Checks and endorse inspection record prior to issue to customers.
• Ensures subordinates comply with company’s procedure and work instructions.
• Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
• Implements and compile the monthly key performance indicators (KPI) related to piping.
• Verifies piping MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.
• Performs others duties as signed by the superior(s) from time-to-time.

Requirements

• Degree or Diploma in Mechanical Engineering / Marine and Offshore or equivalent.
• Minimum 5 years of relevant work experiences in shipbuilding / oil and gas / offshore projects as QA/QC Structural Inspector.
• Working in FPSO/FSO/FPU Project will be added advantage.
• Shall be familiar with AWS D1.1, API 2X, ASME Section II, and ABS Class rules.
• Certified Welding Inspector (AWS CWI or CSWIP 3.1)
• NDT Level II in RT/UT/MPI/PT

Our Address and Working Hours:

Seatrium Limited

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Seatrium Limited

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 7:30am - 5:15pm

Fri: 7:30am - 4:15pm

Seatrium Limited

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Ltd and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description & Requirements

• Leading root cause analysis & corrective action in non-conformance investigation

• Establishing quality inspection plans, COC, procedures / work instructions / API testing

• Responsible for performing gap analysis on standards revision and revise procedure / work instructions

• Attend to customer/ supplier / internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent

• Min 1 year of working experience in Oil & Gas / Metal Machining Industry

• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

• Able to work 5.5 workdays

2. SKILLS

Web Testing

Tactics

Game Development

Strong Attention To Detail

MetaL

Unit Testing

Investigation

Root Cause Analysis

Quality Inspection

Machining

C#

Debugging

API

Mechanical Engineering

C++

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

• QA (HSSQE) & Vetting Head reports directly to Senior Manager (SM) or General Manager (GM) Fleet Operations.
• Hold the position of DPA and reports directly to Managing Director (MD) on breach of HSSQE matters.
• Establishing, communicating, deploying and maintaining of Company’s Health, Safety, Security, Quality and Environmental related policies and procedures; including the preparation and maintenance of relevant supporting documents, and the provision of training as required.
• Ensuring the companies compliance with relevant flag state/ class approvals/ IMCA, ISO 9001/14001/45000 QMS and Health, Safety, Security and Environmental requirements through formal/informal and internal/external audits and leading the Audit Program.
• Implementing, maintaining, reviewing of Company’s Safety Management System work manuals and procedures, including maintenance of HSSQE related certifications and local regulatory requirements.
• Plan, organize and take lead to drive safety initiatives and promote safety culture within the company and sub-contractors.
• Take lead to conduct vessel safety audits/ inspections to ensure compliance to legal legislations and organizational requirements. Ensure all appropriate investigation of discrepancies, error, complaints, failure, or findings are properly closed, documented, and communicated.
• Lead the Quality Assurance Committee (QAC) for quarterly meeting and Management Review (MR) annually. Submit the reports for SM & MD’s review and comments.
• To prepare and supervise the programme of Internal & External Audits within the office and for the fleet. Monitoring the timely implementation of all drills and audits of the Company and the managed vessels and ensuring the audit results are reported to the SM & MD.
• Lead the incident investigation team and prepare concise investigation reports in accordance to the regulatory and industry requirement.
• Develop effective communication materials and collaterals (include but not limited to safety messages, advisories, campaigns, posters, etc.) for fleet outreach and learning.
• Ensure proper maintenance of policies and procedures for office facilities.
• Supporting the Crewing, Vessel Operations, Technical, and Insurance departments in safety related matters, including interface with clients, underwriters, industry organizations and regulatory authorities.
• Lead the Emergency Response Team and conduct annual office/ship drills.
• Managing the HSSQE reports required by major oil companies and charterers.
• Manage Company’s tanker fleet’s vetting issues ensuring that the vessels are always maintaining a valid SIRE approval and when required a valid CDI approval as well. Maintain
• Company’s managed Bulkers to meet Right Ship vetting requirements.
• Ensure tanker vessels SIRE validity are meeting ‘Charter Party’ requirements so that vessel will not breach the ‘Charter Party’ clause under “vetting” requirement barring company policy limitation.
• Ensure effective close out of all non-conformances, observations and deficiencies resulting from SIRE inspections.
• Reporting to the SM and CST Management periodically on the vessels’ vetting status, planning and progress including any on-going issues if in case of any difficulties encountered that may cause rejection by either Charterers or the Pool partners operating the respective vessels
• Leads the communication with major oil companies on a regular basis checking Company’s MR ratings and approvals.
• To maintain and update quarterly KPI on vetting and tracking of vessels’ performance versus set targets until the final Management Review on overall vetting performance.
• Keep the ship owners updated with fleet vetting plan and status periodically as required by the owners.
• Ensure vessel screening requirements from major oil companies (MOC) and charterers are attended on timely manner for vessel to be approved for business.
• To carry out pre-vetting exercise for the fleet and to attend SIRE inspections with the appointed inspector.
• To update and share with the fleet on SIRE findings to prevent recurrence.
• Manage all aspect of commercial operations to ensure safe delivery of cargo and services. Lead and provide suitable strategic direction in commercial operations to complement and support Charterer/Owner’s business objectives and strategy.
• Manage Company’s tanker fleet’s vetting issues ensuring that the vessels are maintaining always a valid SIRE approval and when required a valid CDI approval as well. Maintain Company’s managed Bulkers to meet Right Ship vetting requirements.

Authority

• Amend, delete or introduce procedures in the Company’s Safety Management System as recommended by the QAC and approved by the Managing Director and/or General Manager.
• Schedule QAC meetings; discuss Internal and External Audit findings, Management and Master Review reports, and non-conformities in Safety and Pollution Prevention Practices/Trainings/Drills, Accidents reports and Quality Management Reports.
• Propose amendments, revisions to the Safety Management System to prevent recurrence of detected nonconformities to the systems and/or procedures.
• To prepare the plans and instructions for the key shipboard operations and assigning them to the qualified personnel.
• Collect reports of suggestions/complaints from customers, suppliers, vessels, etc. and formulates continuous improvement programmes to the Safety Management System.

• Planning and preparing test cases and test scenarios based on the project requirements and specifications.
• Executing test cases and scripts to identify defects or bugs in the software.
• Reporting defects or bugs found during the testing process to the development team and tracking them until they are resolved.
• Collaborating with the development team to identify the root cause of defects and assist in fixing them.
• Conducting functional, integration, performance, regression, and user acceptance testing to ensure that the software is meeting quality standards.
• Participating in code reviews and suggesting improvements to the development team.
• Developing and maintaining test plans, test reports, and other documentation related to the testing process.
• Providing feedback to project managers and stakeholders on the software’s quality and testing progress.
• Staying up-to-date with industry trends and best practices in software testing and quality assurance.
• Perform tasks assigned by direct supervisor.

Requirements:

• Degree in Information Technology, Computer Science, or equivalent relevant experience
• Preferably with 3 years experience in IT infrastructure field.
• Technical skills:Strong understanding of software testing methodologies (functional, regression, performance, and user acceptance testing), tools, and techniques; experience with automated testing tools and frameworks such as Selenium, Appium, or Cucumber; ability to develop and execute automated test scripts; ability to identify, document, and track software defects and issues; experience with agile development processes and methodologies.
• Pre and post deployment testing: You should have experience testing software both before and after deployment to ensure compatibility and functionality.
• Familiarity with programming languages: While not a requirement, familiarity with programming languages such as JavaScript, Java & Golang can be helpful in understanding the software development process and identifying issues.
• Database testing: Experience with database testing is a plus, as many software applications rely on database functionality.

• Planning and preparing test cases and test scenarios based on the project requirements and specifications.
• Executing test cases and scripts to identify defects or bugs in the software.
• Reporting defects or bugs found during the testing process to the development team and tracking them until they are resolved.
• Collaborating with the development team to identify the root cause of defects and assist in fixing them.
• Conducting functional, integration, performance, regression, and user acceptance testing to ensure that the software is meeting quality standards.
• Participating in code reviews and suggesting improvements to the development team.
• Developing and maintaining test plans, test reports, and other documentation related to the testing process.
• Providing feedback to project managers and stakeholders on the software’s quality and testing progress.
• Staying up-to-date with industry trends and best practices in software testing and quality assurance.
• Perform tasks assigned by direct supervisor.

Requirements:

• Degree in Information Technology, Computer Science, or equivalent relevant experience
• Preferably with 3 years experience in IT infrastructure field.
• Technical skills:Strong understanding of software testing methodologies (functional, regression, performance, and user acceptance testing), tools, and techniques; experience with automated testing tools and frameworks such as Selenium, Appium, or Cucumber; ability to develop and execute automated test scripts; ability to identify, document, and track software defects and issues; experience with agile development processes and methodologies.
• Pre and post deployment testing: You should have experience testing software both before and after deployment to ensure compatibility and functionality.
• Familiarity with programming languages: While not a requirement, familiarity with programming languages such as JavaScript, Java & Golang can be helpful in understanding the software development process and identifying issues.
• Database testing: Experience with database testing is a plus, as many software applications rely on database functionality.

Job Title: QA/QC Engineer

Salary Range: S$3,400 – S$4800

Report to: QA/QC Manager

Min Qualifications / Experience :

1) Degree in Mechanical Engineering holder with 2-4 relevant experience

Job Skills Required:

1) Knowledge in Microsoft office applications such as Excel, Word, Power Point and

related spreadsheet software.

2) Must be able to work well with others in a team setting.

3) Ability to work independently.

4) Must be able to effectively handle many concurrent projects.

5) AWS, ASME AS, PD5500.

Duties & Responsibilities

a. Assist QA/QC Manager in the managing the QA/QC department.

b. Establish, implement and maintain the QC system for products that need to comply with ASME codes.

c. Prepare, control and maintain the QC Manual in accordance with ASME code.

d. Initiate quality programs and report to QA/QC Manager for the current product quality level.

e. Develop Inspection Test Plan (ITP), inspection and testing procedures.

f. Supervise and guide the team of QC inspectors and administrative assistant.

g. Control the usage of ASME stamps and review ASME’s MDR forms.

h. Maintain and control the welding procedures (WPS) and welder performance qualification records.

i. Any Adhoc assignment given by QA/QC Manager.

Job Description & Requirements

1)Ensure contractor carries out daily works that follow specification and regulations.

2)Monitor quality of precast components for daily production and delivery.

3)Ensure daily production and deliveries are able to cope with site schedule and progress.

4)Inspect all new mould and ensure is ready before proceed for casting of new component.

5)Monitor daily production records and delivery records.

6)Daily inspection for pre-pour of pre-cast component and finished products’ delivery.

7)Planning and schedule for daily production works.

8)Ensure that daily production works are carried out by using latest drawing.

Any other ad-hoc duties assigned

Singaporean / Singapore PR only

Position Summary

• Ensure that all inspections comply with construction standards, approved procedures and drawings, client specifications, as well as class rules, codes, and regulations (AWS D1.1)
• Serve as the primary contact and advocate for the PaxOcean Quality Assurance Department, prioritizing all structural quality-related issues and any additional responsibilities assigned by the QA Head.
• Collaborate with colleagues within the QA Department and production teams to enhance quality execution through improved coordination.

Tasks and Responsibility

• Perform Surveillance Inspection to ensure that the construction work is performed and duly meets the project-specific Quality Requirements.
• Verify in-process inspection, final inspection, and welding.
• Carry out Welding control and inspection.
• Record results of inspections and maintain records of specific items as per contract/specifications.
• Administer RFI requests to Clients and 3rd parties and coordinate for inspection as identified in the respective discipline ITP.
• Raise Non-conformance reports as seen during inspection and follow-up on the status of rework and close-out.
• Review all NDT reports and approval.
• Generate weekly weld rejection rate summary and weekly welder performance.
• Witness all testing activities as required by the approved Inspection and Test plan.
• Monitor PWHT activities carried out as per approved procedure.
• Attend to all potential quality issues to prevent the occurrence of defects.
• Prepare Test Packs for Piping Hydrostatic testing.
• Prepare/compile the final punch list before delivery of the fabricated and assembled components.
• Follow up with other discipline HODs to get relevant documents as per the MDR Index for compiling.
• Progressive compilation of records for MDR (Final Dossiers).
• Coordinate with the client for review and approval of the MDR.
• Carry out surveillance activities during project execution.

Job Requirements

• Minimum 5 years of experience in relevant field
• Experience in any degree/diploma
• CSWIP 3.1 and NDT Level-II certification

Job Description:

- Conduct routine inspection and evaluates their condition and recommend proper execution during work activities.

- Prepare project schedule and presentation of project.

- Lead the kick of meeting.

- Responsible of project management and quality control.

- Prepare & review Civil and Structural drawing.

- Prepare Quantity Take-off of Civil and Structural Materials for BOQ.

- Prepare bid documents for Civil and Structural Project.

- Witness Dimensional Checking during erection & construction.

- Control and check all fabrication activities.

- Maintain welder performances and welders repair.

- Conduct final walk through inspection and monitor rectification of final punch list item. Safety aspects on construction is defined in safety assurance, procedure and thoroughly implemented.

Requirement:

- Minimum 2-4 years Experiences in Civil and Structural sector process plant.

The plant in Singapore (located in Jurong Island) combines monomer and polymer production. It is the result of exceptional investments and aims to support strong daemnd from the customers in Asia.

We are inviting passionate individuals to COME and JOIN us! Be part of our team, ARKEMA! We are seeking a self-driven team player with excellent communivaion skills and able to work independently with minimum supervision, equipped with excellent data collection and analysis and attentive to details.

This position reports to the Lab & QA Manager in Singapore. In addition, there will be matrix reporting and candidate must be comfortable working in a complex matrix reporting environment.

OBJECTIVES

• Comply with company quality assurance standards.
• Coordinates External and Internal Non conformance Systems.
• Document and track quality issues to identify trends and areas for improvement.
• Upkeep Lab Quality KPI including monthly report.
• Create a comprehensive monthly, quarterly and yearly overview of non-conformances; determining trends and insights.

QUALITY (40 %)

• Lead implementation of quality assurance procedures and policies.
• Mange document system for QA&QC.
• Assist management of quality master data in SAP and release of products.
• Provide training and support to employees on quality procedures and standards.
• Lead with cross-functional teams of the plant to identify quality improvement opportunities and ensure timely resolution of issues.
• Conduct internal audit to assess compliance with quality standards and regulatory requirements.
• Ensure readiness for Quality audit (internal and external).
• Continuously improve the effectiveness of the quality management system.

PRODUCT SUPPORT (50 %)

• Provides the voice of the customer (VOC) as needed to ensure customer satisfaction and is the site quality contact for customer quality representative.
• Manage quality customer requests.
• Leads and/or participates in customer audits (including corrective & preventive action plan follow up).
• As a support to Sales and BD teams, leads complaints investigation based on complaint severity & customer requirements, up to and including containment processes and corrective and preventive actions (CAPA). The goal being to provide a timely, effective, response to the customer, utilizing various root cause analysis methodology (8D,5 Why etc.).
• Coordinate main MOC with customers: Packaging changes, RM changes, new assets homologation plan set up (internal / external) and execution follow up.
• Leads establishment & maintain of Customer Specifications ensuring plant capabilities are taken into consideration.
• Leads or provide support Io ensure product certification as needed.
• Assist Process team and Production team to master product quality, to homologate new raw material and new packaging.
• Maintain Raw Material Specifications.
• Hold responsibility & manage product orientation and / or derogation.
• Coordinate new product homologation.
• Coordinate transfer grades from other manufacturing site.
• Support to the production wheel management for polymer unit.

HEALTH, SAFETY AND ENVIRONMENT (10%)

• Attend, participate and contribute to HSE programs and initiatives (zero target LTI, waste management, etc.
• Be an example and comply to HSE policies at any time.
• Carry out laboratory safety audits and ensure compliance.
• Conduct risk assessments.
• Enforce waste management.

SKILLS REQUIRED:

• Degree in Chemistry or equivalent with at least 5 years if relevant experience.
• Sound knowledge on organic chemistry, polymers or equivalent, Quality Management, ISO 9001
• Well versed with Microsoft Office applications, SAP and SPC is a must.

Education: Degree in Chemistry or equivalent, with minimum of 5 years of relevant experience in chemical industry.

Knowledge: Organic Chemistry, Polymers orequivalent, Quality Management, ISO9001

Skills: Microsoft Office applications, SAP, SPC are required.

Posted Job Advert

Today, Lonza is a global leader in life sciences operating across five continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

Responsibilities:

• Support day-to-day Quality Assurance activities in accordance with approved SOPs / Policies for a multi-product, GxP contract manufacturing facility
• In depth awareness of entire process; identifying operational factors which influence the process
• A competent Reviewer and Approver of SOPs, protocols, reports or records
• Can trouble-shoot and able to weigh up all information and consideration in order to choose the optimum path to be taken
• Demonstrate ability to lead a small project and manage the deliverables effectively Develop good working relationships with internal & external customers
• Plan for future activities and coordinate with other departments to complete this
• Develop skills to be Qualified Trainer in area of expertise
• Able to participate actively or lead in deviation investigations, change controls and CAPA plans
• Able to lead, review and approve deviation investigations, change controls and CAPA plan as required
• Perform material release and qualification, joint inspection to identify material defect and review vendor’s investigation report as required
• Review executed batch records and logbooks and ensure that deviations are raised
• Provides Quality oversight for Operations document changes (e.g. MBRs, SOPs, Forms, Logbook, etc.)
• Provides QA oversight in any customer project related activities

Requirements:

• Bachelor's degree with 5-7 years’ experience in Quality Assurance in the Biopharmaceutical industry.
• Familiarity with Regulatory requirements and local Codes & Standards (e.g., FDA, EMEA, and ICHQ7)
• Fair knowledge and experience of the practical and theoretical requirement of quality management system in a GMP facility
• Good oral and written communication skills
• Team player, with strong focus on safety, quality and timelines
• Able to operate independently with minimum supervision for routine work within established policies and procedures and receives detailed instructions on new projects and assignments.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

• To plan, coordinate and execute quality assurance and quality control of project
• To ensure all products are executed in accordance to contract specifications
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• Any other ad-hoc duties as and when assigned

Requirements

• At least 5 years experience in LTA MRT Projects

Key Result Areas:

1. Manage the quality assurance and control of products and services to meet company and customers’ expectations.

Monitor QA/QC and proper documentation for incoming materials, fabrication, and production for

overseas projects

• Prepare inspection and test plans for façade works (Chart H)

• Prepare documents and procedures for inspection/certification

• Implement schedule to ensure QC Inspectors carry out their duties timely and correctly

• Assign proper checking tools for QC Inspectors

• Identify training opportunities for QC Inspectors to attain qualification and upgrade in their jobs

• Assign work checklist and test plan to QC Inspectors

• Organize and implement QMS and audit, including ISO

• Inspect the proper documentation and filing of QA/QC documents

• Search for source information related to QA/QC matters

2. Ensure the quality of products and services provided by suppliers and vendors

Analyse products and services provided by suppliers and vendors

• Inspect key material supplies such as aluminium, extrusions and glass

• Examine prototypes provided by suppliers and vendors

• Supervise the information of supplies in QA/QC systems and inspection records.

3. Attain high QA/QC in manufacturing and installation processes and methods.

• Analyse manufacturing and installation processes and methods

• Inspect method statement and safety risk assessment

• Check tools, equipment calibration procedures and records

EDUCATIONAL QUALIFICATIONS

•General education/Diploma in QA/QC

RELEVANT EXPERIENCE

• Minimum 5 years of working experience in façade industry with good knowledge in product

specifications, reading drawings, industry standards, design, engineering, fabrication,

installation and quality.

PERSONAL CHARACTERISTICS & BEHAVIOURS

• Meticulous with an eye for details

• Decisive

• Collaborative

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Position Summary

• Ensure that all inspections comply with construction standards, approved procedures and drawings, client specifications, as well as class rules, codes, and regulations (AWS D1.1)
• Serve as the primary contact and advocate for the PaxOcean Quality Assurance Department, prioritizing all structural quality-related issues and any additional responsibilities assigned by the QA Head.
• Collaborate with colleagues within the QA Department and production teams to enhance quality execution through improved coordination.

Tasks and Responsibility

• Carry out Survey and Inspection on jobs in Ship Building / Ship Repair, Module, and Ship Conversion QC-related activity, as per Quality standards as per Surveyor and Client requirements on schedule time.
• To check all the Material verification.
• Prefabrication of Hull panels, assemblies, and units to blocks about approved drawings.
• Co-ordination between different engineering and Quality Assurance sections for resolving engineering and other quality & interdisciplinary checks.
• Checking the plate fit-ups of assemblies and units before final welding.
• Involved with the erection of structures from the entire assembly to the final block stage.
• Checking proper alignment of units/blocks using water tube checks & plumb checks.
• Welding consumable Quality Control.
• Sorting out all documents, related to each project and verifying production documents.
• Review Inspection & test plans by international codes and Client Specification Review Project Weld drawing, weld, and NDT map and welding Procedure Specification
• Oversee various tests, including air leak tests, hydrostatic tests, vacuum tests, hydraulic oil flushing, structural load tests, and hose tests
• Well-versed in monitoring preheating and post-weld heat treatment for welding joints by WPS and codes, particularly for structural and high-pressure pipe welding
• Perform Surveillance during inspection to verify compliance with specified yard procedures including preheat, inter-pass temperature control, and post-heat requirements
• Liaise with NDT team for NDT activities and verify reports
• Prepare the final documentation to ensure compliance with specifications and contract requirements

Job Requirements

• Minimum 5 years of experience in relevant field
• Experience in any degree/diploma
• CSWIP 3.1 and NDT Level-II certification

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

- Conduct routine inspection and evaluates their condition and recommend proper execution during work activities.

- Prepare project schedule and presentation of project.

- Lead the kick of meeting.

- Resposible of project management and quality control.

- Prepare & review Civil and Structural drawing.

- Prepare Quantity Take-off of Civil and Structural Materials for BOQ.

- Prepare bid documents for Civil and Structural Project.

- Witness Dimensional Checking during erection & construction.

- Control and check all fabrication activities.

- Maintain welder performances and welders repair.

- Conduct final walk through inspection and monitor rectification of final punch list item. Safety aspects on construction is defined in safety assurance, procedure and thoroughly implemented.

Requirement:

- Minimum 4 years Experiences in Civil and Structural sector in SG process plant.

Carrying out accurate QC inspection works and preparing dimension reports.

Maintaining and setting up documentation and control procedures.

Ensuring product's compliance with project specifications.
Knowledge of quality management systems. (ISO 9001, GMP, etc.)
Problem-solving and attention to detail
Documentation and report writing.
Statistical tools. (e.g. Excel)
Familiarity with measuring equipment and tools.

About the Role

Within an Agile framework, our team provides testing as a service to various squads within a banking and finance domain Agile Release Train. This role ensures the seamless transition of new features and applications into the production environment. We are looking for a new team member to enhance our testing capabilities and collaborate effectively with squads.

Key Responsibilities

• Collaborate with squads to develop effective test strategies and plans.
• Review and analyze user stories with a focus on testing and testability.
• Execute test cases, document results, and report defects in an audit-compliant manner.
• Support squads in troubleshooting and resolving defects during the development process.
• Develop and improve test automation processes, working with fellow test engineers.
• Provide continuous feedback by reporting defects and issues to the squads.
• Ensure quality throughout the change process by working closely with the squads.
• Enhance the testing service through continuous improvement initiatives in collaboration with fellow testers.
• Support the transition of changes into production by conducting post-release testing and support, including training for support team members.

Requirements

Must Have

• Proven experience as a Quality Assurance Tester, preferably within the financial industry.
• Familiarity with Agile frameworks and QA methodologies.
• Experience testing both in-house developed applications and vendor-based systems.
• Excellent understanding of functional and workflow-based system designs spanning multiple interconnected systems.
• Solid knowledge of securities lending, repo, and back-office processes, including:Settlement workflows (e.g., DVP, FOP).
  Corporate actions and their impact on securities positions.
  Familiarity with trading, collateral management, and financial workflows.
  
• Experience working with Temenos T24.
• Proficiency in using Jira and other testing software/tools.
• A positive, can-do attitude with high motivation to acquire new technical and functional skills.
• Ability to work independently with minimal supervision.
• Strong communication skills in English.

Nice to Have

• Experience with test automation and management tools such as Selenium, Tosca, or X-Ray.
• Knowledge of financial messaging standards like SWIFT (MT5xx series) or ISO 20022.