Scope

1. Conduct Incoming Inspection willI appropriate inspection tools and technique.
2. Prepare Incoming Inspection cards.
3. Record and maintain relevant information for incoming traceability requirements.
4. Compile and update monthly incoming rejection report and report to Superior.
5. Manage Calibration activities.

• Sourcing of suppliers
• Selection of suppliers
• Evaluation of suppliers
• Coordinate with individual Process Owners
• Register/De-register of Equipment
• Management of Equipment flow
• Management of Calibration Report

PRINCIPAL ACCOUNTABILITIES:

1. Duly inspect certify that parts comply to require specifications and standards.
2. Report Quality problenIs during incoiiiing inspection.
3. Manage Certificate of Conformity

a) Issuance of CoC (Aerospace)

by Understanding of As9100 QMS

c) Undei'standing of ISO/IEC-17050 Requirement

4. Monitor & negotiate cost related to logistic & Calibration.

5. Handling with Delivery / Collection personnel for Calibration.

6. Preparation of Shipping Documents and Handling of packaging.

The QA/QC Manager for Offshore Substation (OSS) is responsible for the overall quality assurance and quality control of all activities related to the design, procurement, construction, installation, testing, and commissioning of the offshore substation. The role ensures that all processes, systems, and deliverables meet the required quality standards, industry regulations, and Employer Requirement. The QA/QC Manager will implement and oversee the project-specific quality management system (QMS), ensure compliance with quality standards, and lead efforts to identify and mitigate quality risks throughout the project lifecycle.

DUTIES AND RESPONSIBILITIES

Quality Assurance (QA):

• Develop, implement, and improve the project’s QMS in line with Employer Requirement, industry standards (ISO 9001, IEC, DNV, etc.), and Korea regulatory requirements where necessary.
• Develop detailed quality plan, procedures, and work instructions specific to offshore substations, ensuring alignment with project scope and requirements.
• Perform suppliers and subcontractors’ qualification and selection processes based on their ability to meet quality standards. Monitor and assess suppliers and contractors’ quality performance throughout the project execution.
• Conduct internal and external audits of the project’s QMS, ensuring compliance with Employer Requirement, established procedures, standards, and regulations. Manage corrective actions to address any audit findings.
• Ensure all project documentation (e.g., Inspection, Test and Audit Plan, Project Quality Plan, drawings, technical specifications, procedures, and reports) are properly prepared, controlled, stored, and accessible to authorized personnel.
• Organize and deliver training for the project team on quality procedures, requirements, and tools to ensure consistent understanding and adherence to quality standards.
• Identify and manage quality risks associated with the engineering, procurement, construction, and commissioning phases. Develop risk mitigation strategies and contingency plans in cooperation with Interface and Risk Manager

Quality Control (QC):

• Supervise all quality control activities related to offshore substation BOP and materials, including inspections, testing, factory acceptance tests (FAT), and site acceptance tests (SAT or HAT) for the main electrical equipment (MEQ), structures, and other BOP.
• Conduct regular site inspections to ensure that construction and installation activities comply with quality specifications. Monitor offshore installation activities, including Topside construction, equipment commissioning, and so on.
• Track, report, and manage non-conformities (NCs) for materials, processes, and equipment. Ensure that root causes are identified, corrective actions are implemented, and preventive actions are taken to avoid recurrence.
• Ensure that all testing, including electrical, mechanical, and structural tests, are carried out according to Employer Requirement, approved standards, procedures, and protocols.
• Make sure that the offshore substation meets DNV Project Certification based on DNV-ST-0145 (2021 Edition) primarily.
• Supervise the commissioning process to verify that the offshore substation meets all operational and safety requirements.
• Maintain detailed, accurate records of inspections, testing, and commissioning activities. Ensure all QC-related documents are in compliance with regulatory requirements and Employer’s expectations.
• Ensure the compilation and completion of quality records, inspection reports, and test certificates for final handover to Employer upon project completion.

Project Integration & Coordination:

• Work closely with the project engineering, procurement, construction, and commissioning teams to ensure quality management is integrated into all phases of the project lifecycle.
• Interface with external stakeholders such as regulatory authorities, certifying bodies, and Employer to ensure the quality system and results meet project standards and expectations.
• Communicate quality-related issues, risks, and actions to Project Manager, Interface and Risk Manager, and other stakeholders in a clear and timely manner.

Risk and Issue Management:

• Identify quality-related risks, including those related to offshore conditions, materials handling, and installation processes. Develop strategies to mitigate these risks and prevent issues from impacting project timelines, costs, or safety.
• Lead the resolution of quality-related issues on-site, ensuring effective communication and collaboration across teams. Ensure non-conformity reports (NCRs) are documented and appropriate corrective actions are implemented promptly.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

Education

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Civil Engineering, or a related field. A Master’s degree or certifications in Quality Management (e.g., ISO 9001 Lead Auditor, Six Sigma) is a plus.

Experience

• Minimum 8-12 years of experience in quality assurance and quality control, with at least 5 years in the offshore energy sector or large infrastructure projects (offshore substations, offshore wind, or oil & gas).
• Proven experience in managing QA/QC processes for offshore substations, electrical installations, marine construction, or other similar offshore projects.
• Experience of offshore substation design and construction, electrical equipment (transformers, switchgear, substations), cabling, and the other related BOP.
• Experience with quality standards relevant to offshore energy projects, including IEC standards, DNV rule / Project Certification, ISO 9001, and others.
• Experience in developing and implementing QMS, conducting quality audits, and managing non-conformities in large-scale projects.

Qualifications

• Ability to integrate quality management into the overall project lifecycle.
• Familiarity with project management software tools (e.g., MS Project, Primavera) is desirable.
• High level of attention to detail and ability to identify issues or discrepancies in project deliverables.
• Strong leadership and interpersonal skills, with the ability to manage teams, collaborate across departments, and communicate effectively with senior management, Employer, and external stakeholders.
• Ability to quickly identify the root cause of quality issues and implement corrective actions in a timely manner.
• ISO 9001 Lead Auditor, Six Sigma Green/Black Belt, or other relevant quality certifications is highly valued.
• BOSIET, Offshore Medical, or other relevant offshore certifications is highly valued.

Key Responsibilities

Quality Management:

Develop, implement, and maintain a comprehensive quality management system for food production processes, emphasizing compliance with Halal guidelines.

Establish and monitor quality control procedures to ensure adherence to regulatory standards.

Food Safety Regulations:

Ensure adherence to local and international food safety regulations and standards, with a specific focus on Halal requirements.

Conduct regular audits to assess and enhance food safety practices, including those related to Halal processes.

Process Improvement:

Identify areas for process improvement and efficiency in the production cycle.

Implement corrective actions to address quality issues.

Supplier and Vendor Quality Assurance:

Collaborate with suppliers and vendors to ensure the quality and Halal compliance of raw materials and ingredients.

Conduct quality assessments of suppliers and implement improvement plans as needed

Team Leadership:

Lead and develop a team of quality assurance professionals.

Regulatory Compliance:

Stay updated on changes in food safety regulations and standards, with a specific focus on Halal guidelines in Singapore.

Qualifications and Experience

Bachelor's degree in Food Science, Quality Management, or a related field. Master's degree is a plus.

Preferred Skills:

Familiarity with Singapore's food safety and quality regulations, especially those related to Halal.

Experience with continuous improvement methodologies

Knowledge of risk assessment and management in food mass production

Familiar with FSMS implementation - ISO22000, FSSC22000, BRCGS

Application

Sarka LLORENS 辛莎

Recruitment Partner - Asia - R&D

M: +65 9297 9345

E:[email protected]

EA No: 17S8637 Reg No:R1329451

Be part of something altogether life-changing!

Working at Cytiva means being at the forefront of providing new solutions to transform human health. Our incredible customers undertake life-saving activities ranging from fundamental biological research to developing innovative vaccines, new medicines, and cell and gene therapies.

At Cytiva you will be able to continuously improve yourself and us – working on challenges that truly matter with people that care for each other, our customers, and their patients. With associates across 40+ countries, Cytiva is a place where every day is a learning opportunity – so you can grow your career and expand your skills in the long term.

Forming part of the Biotechnology segment at Danaher, we bring together dedicated technical expertise and talent to develop the next generation of life-changing therapeutics.

Forming part of the Biotechnology segment at Danaher, we bring together dedicated technical expertise and talent to develop the next generation of life-changing therapeutics.

The Service QA Lead - Training for Cytiva is responsible for collaborating with People Leaders to ensure we are meeting the training requirements of ISO 9001 and our QMS system within the Services organization. This role will also be responsible for collaborating with the QMS documentation lead when training needs to be completed for procedure updates, for representing training during external audits, managing training metrics and driving continuous improvement within the Services training program. This role will be responsible for conducting training in certain situations.

This position is part of the Hardware Solutions Service organization located in Singapore and will be fully remote. At Cytiva, our vision is, to advance future therapeutics from discovery to delivery.

What you’ll do:

• Ensure the Services organization is compliant with the training requirements of ISO 9001 and the Cytiva QMS while also driving continuous improvement
• Collaborate with People Leaders to determine training required for associates and maintaining the training plan for the organization
• Collaborate with Documentation lead to deliver training on updated procedures
• Lead and Facilitate training as needed
• Host internal and external audits

Who you are:

• Minimum, Bachelor's degree from an accredited University or College, preferably in a Science or Engineering discipline
• 7 or more years of related quality experience
• Comprehensive understanding of ISO 9001, ISO 13485, GMP, and CFR requirements
• Strong analytical- and problem-solving skills.

Travel, Motor Vehicle Record & Physical/Language/ Environment Requirements:

• Ability to travel abroad upon business needs (5%)
• Must have a valid driver’s license with an acceptable driving record within territory or locations

It would be a plus if you also possess previous experience in:

• Pharmaceutical Equipment Services

At Cytiva we believe in designing a better, more sustainable workforce. We recognize the benefits of flexible, remote working arrangements for eligible roles and are committed to providing enriching careers, no matter the work arrangement. This position is eligible for a remote work arrangement in which you can work remotely from your home. Additional information about this remote work arrangement will be provided by your interview team. Explore the flexibility and challenge that working for Cytiva can provide.

Brief description

You will be involved to implement and maintain a reliable quality control system to guarantee high quality products and solutions output from the company, and to plan and schedule its manufacturing order outputs.

Tasks

• Plan, and schedule all manufacturing orders, and prototyping activities in accordance to order priority,

• Ensure all its manufacturing use equipment and tools are prior calibrated to acceptable standards and records,

• To check all incoming supplies for customer’s production meets the adopted quality acceptance standards,

• To ensure all production outputs at various stages of manufacturing processes exceeds &/or meet customer’s requirement,

• Conduct all out-going goods meet the stipulated IPC & customer Quality control standards,

• To observe, identify, recommend, and implement improvement for company overall quality assurance and control system,

• Conduct ISO9001 internal audits as when scheduled,

• Develop, conduct any relevant technical or IPC based trainings to Manufacturing staffs as when required,

• Conducts product / solution failure analysis as when required for internal/external orders

Qualifications and Requirement

• Minimal Advanced Technical Certificates, Diploma or Degree in Electrical or Electronics Engineering discipline.

• Relevant working experience is preferred.

• Hands-on attitude towards problem-solving is essential.

• Able to interpret and understand electrical and mechanical drawings / datasheet and charts accurately and independently.

• Familiar with ISO9001:2015 QMS, and Audit Matters

• IPC standards trained (specialist) certification is preferred, otherwise training shall be provided (training bond applies)

• Honest and Strict, and have Good interpersonal communication skills.

• Well organized, responsible, and always strive to meet production datelines.

• 5.5 days work week

Job Description

• Industry/ Organization Type: Manufacturing & Production
• Position Title: QA Executive/Senior QA Executive
• Working Location: Redhill (Near to the MRT)
• Working Hours: 5 days a week (Flexi Hours)
• Salary Package: Up to $5000 (Basic) + $88 (Fixed Allowance) + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Conduct regular quality assessments to troubleshoot and resolve issues with product functionality.
• Partner with R&D to evaluate new products or parts and generate detailed quality reports.
• Execute functional, performance, and reliability tests.
• Maintain compliance with Quality Management Systems, including ISO 9001.
• Provide expert QMS advice and lead continuous improvement efforts across all business units.
• Manage ESG projects from initiation to completion, aligning with corporate sustainability goals.
• Create and oversee project plans, timelines, and budgets, ensuring efficient resource coordination.
• Lead cross-functional teams to deliver projects on schedule and within budget.
• Perform additional duties as delegated by the team leader.

APPLY NOW!!!

• Bachelor’s degree in Electronic and Electrical Engineering.
• At least 2 years of experience in operations, quality, and engineering within the manufacturing sector.
• Proficient in Quality System Standards, including ISO9001, ISO14001, and ISO45001.
• Solid understanding of sustainability concepts, ESG frameworks, and current industry trends.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Responsibilities
- Organize and lead the team to accomplish the quality goals
- Recruit qualified talent and improve team building & development
- Focus on optimizing the holistic team workflow and achieve efficient cooperation across teams.
- Work with the quality control team and external partners to maintain high quality support
- Deal with dynamic and fast-paced environment and make decisions with ambiguous information
- Responsible for ensuring quality in game development and operation

Requirements
- Bachelor’s degree or higher in Computer Science or related
- Proficient in a programming language (C++,C,C#,php,Python).
- 10+ years Quality Assurance experience, with 5+ years managing in-house testers
- Experience with game testing, including functional testing, frontend and backend performance testing, adaptability testing, etc.
- Experience in overall project testing design and management
- Experience in working with testing teams and experts remotely
- Ability to work under pressure, having strong interest in and passion for games.
- Ability to quickly pick up and implement new technical skills
- Excellent communicating skills and coordination abilities

We are looking for an experienced Quality Engineer for the Android platform to ensure our products are of the highest quality and reduce our time to market.

Why engineers love working with us:

• We embrace technology: We work on the latest technologies with some of the most brilliant minds in the field.
• We test heavily: We don't leave things to luck. We test our products to ensure quality delivery.
• We do shift-left testing: We provide a test plan as soon as the sprint begins to develop tests first, so we can find bugs early in the process.
• We run fast: Tests should provide meaningful feedback in a short amount of time and be stable at all times.

Who you are

You are a problem-solver with experience in collaborative teams that deliver results. You embrace change, ask critical questions, and speak up if you notice an imbalance in effort and impact. With a growth mindset, you are collaborative, open to feedback, and willing to share knowledge and mentor others.

What you'll do

• Review and advise developers on what and how to test new features
• Automate the end-to-end test scenarios for the Android platform
• Run impact analysis to understand risks and how to mitigate them
• Take initiatives in improving our testing coverage across the product
• Contribute to the automation traceability metrics
• Advise the development team to place the automating tests in CI/CD pipeline
• Oversee all aspects of quality assurance. Establish metrics, apply industry best practices, and develop new tools and processes to meet quality goals.
• Identify, document, and track bugs, from discovery to resolution
• Stay current on new technologies and ensure components are designed for testability

What you'll bring

• At least 5 years of total experience in Quality Engineering roles, out of which a minimum of 3 years should be spent in testing and automating Android apps
• Excellent skills in Espresso & UIAutomater test frameworks
• Foundational programming skills in Kotlin
• Good knowledge of the Android SDK
• Demonstrated experience in developing and executing test plans, scripts, and procedures
• Analytical skills to determine and improve development deliverables' testability and find root causes and solutions for detected issues.
• The capability of supporting product management in user story refinement, especially in defining acceptance criteria
• Detailed and effective verbal and written communication skills, ability to influence others
• Experience with google cloud firebase for running the automated tests (nice to have)

Success metrics

• Quality: Drive down our defect escape rate
• Coverage: Define, track, and increase our testing coverage
• Velocity & efficiency: Reduce our testing cycle time
• Testing environment stability: Ensure the stability of our test environment

How we'll support you

We believe in fostering an environment that empowers decision-making at all levels. Our culture is rooted in the inverted pyramid approach, where the engineers, who have a deep understanding of the product and the customers, are the ones who have the knowledge and the authority to make impactful decisions.

• We prioritize treating every team member with respect and promote open and constructive feedback, ensuring a culture of trust and transparency
• We encourage learning through experimentation and provide a safe space for everyone to learn from their experiences
• Our managers are dedicated to facilitating career growth and creating an environment that attracts and supports talented engineers

ExpressVPN, a Kape Technologies company, is an equal-opportunity employer. We promote equal recruitment and employment opportunities and do not discriminate based on gender identity and/or expression, age, race, color, disability, culture, religion or belief, family and/or marital status, sexual orientation, or other characteristics protected by applicable law. We celebrate a diverse and inclusive work environment in which applicants and employees are treated with respect and dignity and excel based on personal merit, qualifications, experience, and performance.

Key Responsibilities

• Evaluate the suitability of new materials for product development in alignment with customer requirements.
• Ensure all incoming materials meet defined quality parameters.
• Preparing chemical formulations of new products.
• Conduct trial blends, assess results, and optimize formulations.
• Develop and evaluate product formulations based on test results and customer specifications.
• Ensure finished product test results comply with customer requirements.
• Maintain and develop quality assurance/control procedures to ensure product consistency and compliance.
• Oversee test method development, transfer, and validation to ensure reliable and accurate product testing.
• Provide technical support to the sales team, assisting with product knowledge and customer inquiries.
• Supervise and manage the issuance of job orders for production, ensuring product specifications are met.
• Supervise lab staff, ensuring productivity and adherence to quality standards.
• Conduct training on product knowledge, lab practices, and quality procedures to enhance team skills.
• Oversee the maintenance, calibration, and troubleshooting of laboratory equipment, ensuring efficient and accurate operations.
• Manage laboratory resources, including budgeting and resource allocation, to ensure operational efficiency.
• Enforce a strong safety culture in the laboratory, ensuring strict adherence to Health, Safety, and Environmental (HSE) regulations, protocols, and procedures.

Key Skills and Personsl Attributes

• Professional experience 11+ years, with relevant functional experience.
• Read, write and speaking ability of English and Mandarin is a must.
• Proven leadership and team management experience.
• Excellent problem-solving skills and attention to detail.
• Strong communication skills for cross-departmental collaboration and customer support.
• Knowledge of ISO 9001/14001/ HSE regulations and safety protocols.

Essential Criteria

• Bachelor's or Master's degree in Chemistry, Chemical Engineering, or a related field.
• Extensive experience in a laboratory environment with a focus on product development and quality assurance.
• Strong knowledge of chemical formulations, testing methodologies, and quality control standards.

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

We are partnered with an established organisation to look for a Test Automation Engineer on a permanent basis.

Responsibilities:

• Automation Design & Development: Creating automation designs and scripts to test product functionality.
• SDLC Participation & Collaboration: End-to-end testing and Interfacing with a diverse range of IT stakeholders (vendors, developers, business analysts, project managers, etc.).
• Test Planning & Execution: executing tests across various domains (systems, networks, applications, etc.).
• Continuous Improvement: Evaluating, maintaining, and improving automation systems for efficiency and effectiveness.
• User Acceptance Testing: Emphasizes documenting processes for ease of future modifications, assisting with User Acceptance Testing (UAT)

Responsibilities:

• Bachelor's Degree in Computer Science / Computer Engineering or equivalent
• At least 6 years of experience in Automation Engineering with a solid understanding of Testing Methodologies, frameworks and SDLC.
• Proficiency in Java, VBScript and automated scripts
• Experience working in an agile environment

Due to the urgency of this role, we are only considering candidates with existing working rights in Singapore.

If you are keen on this role and meet the qualifications, apply now or send your cv to [email protected]. We will arrange for a confidential chat if your profile aligns.

If you do not hear from us within 2 working days, please take this as a notification that you have not been shortlisted.

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Do you believe your designs and code could change the world? If YES, read on!

Mavericks Consulting is a powerhouse of skilled IT professionals who love their craft. We solve complex business problems with simple working solutions by applying Agile software development practices. We provide consultancy advice, develop prototypes for experimentation and validate ideas quickly. We love to write code and build systems that put smiles on our delighted users. We share and have fun together on our continuous learning journey.

Join us and multiply the fun and awesomeness of our workplace!

Your Role and Responsibilities

• Developing test strategies, test plans and test cases to ensure quality code that meets cross-functional requirements (including performance, usability, security etc.)
• Challenge business requirements to deeper empathise with end-users
• Championing and guiding others to adopt Agile and other best practices (e.g. Test-Driven Development (TDD), Behaviour Driven Development (BDD), Continuous Integration/Continuous Delivery (CI/CD), etc.) to create high-quality meaningful solutions
• Perform automated and manual testing to inspire confidence, to improve and refactor the existing automation framework and tests and lastly, to provide quality assurance on the code and product
• Improve and refactor the existing automation framework and test
• Collaborating with amazing people of different backgrounds and skillsets to solve challenging and complex problems
• Actively contributing to the company with your ideas and passion
• Creating and maintaining a dynamic and inclusive work environment
• Being flexible and open to feedback
• Adopting a positive learning and growth mindset in all areas of your work
• Genuinely wanting to help change the world

Application Process

1. Pre-interview Exercise

• Mandatory preliminary round to get a rough gauge on your technical competency

2. Introductory Call

• A session to get to know more about you and your experience on projects

3. 1st technical Interview

• A more in-depth look at your technical skills

4. 2nd technical Interview

• A more in-depth look at your technical skills

5. Leadership Round

• A session to get to know you more on a personal level

For more details, do visit our website!

The Qualifications To Be a Maverick

1. Minimum Qualifications

• At least 5 years of experience in quality assurance and testing various applications for production
• Worked in high performance and cross-functional Agile software engineering teams that used practices like Kanban/Scrum/Lean/XP, Test Driven Development (TDD), Behaviour Driven Development (BDD), Continuous Integration/ Continuous Delivery (CI/CD), etc.
• Experience in driving QA principles and practices in Agile teams
• Iteratively creating and managing automated functional tests in collaboration with the development teams
• Experience in performing both manual and automated tests
• Experience in writing, executing and validating tests across the test spectrum which includes, but is not limited to security testing, load testing, stress testing, performance testing, etc.
• Know and have practised key QA concepts such as Test Pyramid, Page Object Model (POM), etc.
• In-depth knowledge of fundamental code principles like Object-Oriented Programming (OOP), Page Object Model (POM)
• Experience in using clean code practices to write readable, maintainable code to test applications
• Experience in using either Cypress or Playwright

2. Desirable Qualifications

• Experience with writing automated tests in a behaviour-driven manner
• Experience with testing different applications (e.g. Web, Mobile, Cloud, etc.)
• Experience with various techstacks (e.g. Typescript, Javascript, etc.)
• Experience with testing applications for various industries
• Experience in other areas of the SDLC (e.g. Development, Deployment, Requirement Gathering, etc.)
• Experience with setting up DevOps and other automation practices

More about the job

Salary and Benefits

• Competitive salary package (including bonuses)
• Medical and Dental insurance for you and your dependents
• Telecommunications allowance
• Financial and logistical support for Work Visa procurement and relocation (if applicable)

Learning and Development

• Book and Training allowances
• Diverse Career Progression Opportunities
• Personal Development Opportunities

Work Arrangement

• Good work-life balance
• Open office concept
• Position is based in Singapore

Dress Code

• (Generally) Smart-casual
• Formal with some clients

If you think you have what it takes to be a Mavericks, contact us now!

Job Responsibilities:

• Perform ICP-OES analysis and other lab activities to support the manufacturing of our product.
• Organize and maintain lab document and records, proper housekeeping and equipment maintenance.
• Monitor and maintain optimum inventory level for pure metals, master alloys and lab supplies through proper planning and scheduling.
• Troubleshoot and solve the daily analysis related issues. Review analysis report periodically for abnormalities.
• Update statistical data and monitor SPC trend.
• Enforce and ensure compliances to 7S requirements and ICP lab procedures and work instructions.
• Maintain proper backup and functioning of various databases in the lab.
• Plan daily activities to improve the lab workflow and efficiency.
• Ad hoc project and tasks that may arise and allocated by immediate supervisor. Support operations like CAR/Work Cell/SWR activities.

Job Requirement:

• NiTEC or Diploma in Chemical Process Technology or related studies
• At least 2 years of laboratory experience
• Experience in ICP-OES, IC, XRF, UV-Vis, titrator is advantageous.
• Laboratory environment with PPE and jumpsuit are required.

Driven by our passion for spreading joy and unleashing limitless creativity in the world of gaming, our goal is to establish a game studio right here in Singapore. Our dedicated focus lies in crafting casual mobile games that deeply immerse players in incredibly enjoyable experiences!

We eagerly welcome humble yet ambitious individuals to join us on this thrilling journey!

Key Responsibilities

• Conduct thorough testing of game builds to identify bugs, performance issues, and inconsistencies.
• Develop and execute detailed test plans and test cases, ensuring all game features are thoroughly tested.
• Document and report bugs clearly, providing detailed reproduction steps and relevant context.
• Perform regression testing to ensure that fixes are effective and do not introduce new issues.
• Collaborate with developers and game designers to communicate findings and verify issue resolutions.
• Provide constructive feedback on gameplay mechanics, user experience, and overall game quality.
• Assist in maintaining and improving QA documentation, processes, and tools.

Requirements

• Extensive experience in game QA, with a strong track record of testing
• In-depth understanding of QA methodologies, testing tools, and best practices.
• Proficiency in bug tracking and test management systems.
• Strong analytical, problem-solving, and communication skills.
• Excellent attention to detail and a passion for delivering high-quality games.
• Familiarity with game development processes and tools (e.g., Unity, Unreal).
• Experience testing games across multiple platforms.

Preferred Requirements

• Experience with casual mobile games
• Knowledge of automation testing and scripting languages
• Familiarity with performance testing and optimization techniques.

Application Instructions

• Please include in your resume, a list of games you have played/ tested extensively, along with the approximate number of hours spent on each. This will help us understand your experience and preferences.

• Report daily to QNQC Coordinator/ Engineer and advise him on the client main contractor compliance to contract procedures and standards and any matters effecting quality
• Ensure documentation is clear, precise and accurate, and within the requirements of the applicable construction code and project specifications.
• Working knowledge of ASME SEC
• Perform visual inspection on welds for the following or as applicable
• Flag / identify any welds or items that require NDE to be completed, once completed, ensure this is documented, in case of any items that have had NDE completed and repairs are required
• Report and document internal & external Non-Conformances
• Perform field inspections and quality assurance of construction projects
• Provide daily construction reports and maintain up-to-date files of all construction documents
• Attend and participate in project meetings to keep Project Manager apprised of project progress, status, quality and schedule
• Identify and evaluate potential new observed hazards and implement controls as project's scope of work changes

Job Description

• Industry/ Organization Type: Manufacturing & Production
• Position Title: QA Executive/Senior QA Executive
• Working Location: Redhill (Near to the MRT)
• Working Hours: 5 days a week (Flexi Hours)
• Salary Package: Up to $5000 (Basic) + $88 (Fixed Allowance) + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Conduct regular quality assessments to troubleshoot and resolve issues with product functionality.
• Partner with R&D to evaluate new products or parts and generate detailed quality reports.
• Execute functional, performance, and reliability tests.
• Maintain compliance with Quality Management Systems, including ISO 9001.
• Provide expert QMS advice and lead continuous improvement efforts across all business units.
• Manage ESG projects from initiation to completion, aligning with corporate sustainability goals.
• Create and oversee project plans, timelines, and budgets, ensuring efficient resource coordination.
• Lead cross-functional teams to deliver projects on schedule and within budget.
• Perform additional duties as delegated by the team leader.

APPLY NOW!!!

• Bachelor’s degree in Electronic and Electrical Engineering.
• At least 2 years of experience in operations, quality, and engineering within the manufacturing sector.
• Proficient in Quality System Standards, including ISO9001, ISO14001, and ISO45001.
• Solid understanding of sustainability concepts, ESG frameworks, and current industry trends.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

As a Software QA, you will be responsible for ensuring the quality, reliability, and performance of Project WATT's software systems. This role involves planning, executing, and delivering comprehensive testing strategies while collaborating closely with development and operational teams. You will utilize industry-standard testing tools and platforms to create efficient workflows, simulate real-world scenarios, and deliver actionable insights that enhance product stability and user satisfaction.

Responsibilities

• Develop and execute test plans, schedules, and strategies that align with project timelines, milestones, and objectives.
• Define clear testing objectives, deliverables and success criteria for each phase, ensuring alignment with product requirements.
• Utilize standardized testing platforms (e.g., BrowserStack, Sauce Labs) and tools (e.g., Docker Compose) to configure and manage test environments, replicating real-world scenarios.
• Conduct manual and automated testing across the software stack, including front-end, back-end, and APIs.
• Perform regression, performance, and stress testing to validate system stability under high-traffic and operational conditions.
• Identify, document, and prioritize software defects, ensuring timely resolution in collaboration with the development team.
• Monitor and analyze testing progress, proactively identifying risks and implementing corrective actions to meet deadlines.
• Deliver detailed test results, defect reports, and insights to stakeholders, supporting data-driven decisions.
• Continuously maintain and improve automated testing frameworks and workflows to enhance testing efficiency.
• Document testing processes, tools, and best practices to ensure team alignment and knowledge sharing.

Requirements

• A Bachelor's or Master's Degree in Computer Science, Software Engineering. At least 3 years of professional experience in software quality assurance may be prioritized.
• Proven ability to plan, execute, and deliver comprehensive testing strategies, meeting project goals and timelines.
• Familiarity with industry-standard testing platforms, containerization tools, and cloud-based testing services.
• Ability to independently set up and maintain testing environments is strongly preferred.
• Strong problem-solving skills with the ability to proactively address technical challenges and risks.
• Experience conducting manual and automated testing, including functional, regression, and performance testing.
• Excellent organizational and communication skills, with the ability to manage multiple testing activities and collaborate with cross-functional teams.
• Familiarity with project management tools for tracking testing progress and reporting deliverables.
• A proactive approach to maintaining system stability and reliability, with a strong commitment to delivering high-quality software solutions.

Reporting to:

Technical Lead

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

What will you do?

• Tech design, development, test and operation of the platform including but may not limited to frontend, backend, mobile application (for both iOS and Android) and other services/components required
• To support service-based architecture design and implementation for backend services.
• To lead test planning, automation and test cases design and provide support on test implementation together with developer.
• Must be familiar with prevailing test framework and its use in quality control of software development
• Tech design based on the requirement provided by business team
• Implementation of applications, services and integration
• Testing and quality management of the solution including but may not limited to unit test, functional test, e2e test, test automation, etc.
• Security monitoring, enhancement and issue fix
• Cloud environment and deployment management
• Operation and maintenance of platform and tech support provisioning
• Tech design documentations(e.g. architecture, ERD, API specifications, flow chart, etc.)
• Operational runbooks (e.g. admin manual, deployment manual, backup & restore plan, etc.)
• Security design documentations (e.g. security architecture design)
• Test reports (e.g. test coverage report for unit test, e2e test report)
• Release report
• Other works required by the development and operation of the project.

What are we looking for?

• Degree in software engineering, computer engineering, electrical engineering, or infocomm-related discipline.
• At least 5 years of hands-on experience
• Excellent verbal communication skills
• Proactive, self-driven and self-motivated

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

JD QA Executive – 1 year Contract

Reports to: Quality Assurance Manager

Main duties and responsibilities

1. Product Quality Management

a. Conduct product cuttings on core ingredients as per Brand Standards requirement to ensure product quality.

a. Assist the team in conducting product test of alternative ingredients/packaging material on our recipe/processes.

b. Assist in conducting sensory evaluation on alternative core ingredients.

2. Restaurant Quality Management

a. Conduct restaurant food safety compliance check on critical restaurant stores as well as support for restaurant food safety audit program.

b. Investigate and troubleshoot all matters relating to product quality and food safety in the restaurant and follow up with suppliers for any corrective action.

c. Conduct training to restaurant team members in relating to product quality and food hygiene.

d. Work closely with operations team to finalise SOPs.

3. Any other ad-hoc duties and responsibilities assigned by Reporting manager.

Knowledge, Skills and Requirement

- Tertiary qualification in Food Science or similar relevant equivalent

- Great interpersonal and communication skills

- Good proficiency in written and spoken English and Mother Tongue language

- Good knowledge and proficiency in the use of Microsoft office – Words, Excel, PowerPoint

- Able to work independently and collaboratively with internal and external stakeholders

- Working knowledge of HACCP and/or GFSI food safety standards will be added advantage

- Have food safety auditing experience in F&B industry

- Possess a positive attitude and learning mindset

- Minimum 1 years of experience in relevant food related industry