- Conduct routine inspection and evaluates their condition and recommend proper execution during work activities.

- Prepare project schedule and presentation of project.

- Lead the kick of meeting.

- Resposible of project management and quality control.

- Prepare & review Civil and Structural drawing.

- Prepare Quantity Take-off of Civil and Structural Materials for BOQ.

- Prepare bid documents for Civil and Structural Project.

- Witness Dimensional Checking during erection & construction.

- Control and check all fabrication activities.

- Maintain welder performances and welders repair.

- Conduct final walk through inspection and monitor rectification of final punch list item. Safety aspects on construction is defined in safety assurance, procedure and thoroughly implemented.

Requirement:

- Minimum 4 years Experiences in Civil and Structural sector in SG process plant.

Responsibilities

Mechanical

• Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
• Monitors and ensure all mechanical works are carried out according to the latest revision mechanical drawing and complies with contract specification, class requirements and quality management system.
• Arranges coordinate and carry out all the inspection inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
• Performs material equipment incoming are as per Vendor document;
• Verifies tools and equipment used are as per procedures;
• Familiarizes with mechanical inspection process;
• Verifies NDT are done as per approved NDT plan & procedures.
• Verifies preservation are being performed as per preservation plan & procedures.
• Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
• Prepares review and document inspection records, certificates and NDT reports for the submission to relevant party.
• Checks and endorse inspection record prior to issue to customers.
• Ensures subordinates comply with company’s procedure and work instructions.
• Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
• Implements and compile the monthly key performance indicators (KPI) related to mechanical.
• Verifies mechanical MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.

Dimension Controller

• Implements dimensional control methods and procedures throughout the fabrication and integration process of the modules to meet the requirements of project specifications and codes.
• Conducts dimensional checking using latest electronic total stations before and after welding of the main deck frame and main column of the modules to ensure that the dimensions are within specifications.
• Reviews design drawings, do necessary best fit calculations, prepare professional dimensional control reports using AutoCAD and get approval by the clients and/or certifying authority.
• Maintains dimensional survey equipment and keep proper documentation of dimensional control reports to meet project requirements and QA/QC audit standards.
• Gives guidance and advice to sub-contractors on how they can increase their productivity.
• Liaises with key stakeholders including Client on the dimensional control methods, acceptance criteria in accordance to project requirements.
• Prepares and compile final dimensional control survey reports as part of the final documentation report.

Electrical

• Takes charge of projects, coordinate and carry out all E& I QA/QC activities for the projects including hazardous zone equipment’s inspection (ATEX/CompEx/IECEx Certified).
• Review and evaluate the drawings as per Classification Societies and Client’s requirement.
• Prepares the QA procedures and get it approved with Classification Societies and Client.
• Witness the testing of HV/LV circuit breaker/starter, neutral earthing resister/fuses and cable megger-ing.
• Coordinates all termination inspection of electrical installation of equipment.
• Preparations of electrical or mechanical completion for equipment.
• Carries out the inspection and testing with Class Surveyors and Class Representatives.
• Ensures all quality control documents are compiled and information’s are handed over for as-build.
• Coordinates daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Monitors and ensure all work is carried out according to the latest revision electrical drawing and complies with contract specifications, Class requirements and Quality Management System procedures.
• Checks and endorse inspection record prior to issue to Client.
• Ensures subordinates comply with Company’s procedure and work instruction
• Reports any non-conformance (NC) and issue Corrective Action Request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
• Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
• Implements and compile the monthly Key Performance Indicators (KPI) related to electrical and instrumentation.
• Verifies electrical and instrumentation MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.
• Performs others duties as signed by the superior(s) from time-to-time.

Coating

• Goods knowledge of all international surface preparation standards, painting/coating application standards, inspection standards, contract, specifications, material technical data sheet, material safety data sheet, documentation etc.
• Witness prequalification of painting system, painter, blaster and adhesion testing subjected for project approval before commencement of painting activities.
• Coordinates in-coming coating materials (e.g. paints, thinners, abrasives etc) conditions, data sheet and batch certificates in accordance with project.
• Inspects correct type of blasting equipment and tools to be used to meet the paint quality according to the paint specification.
• Inspects pre-cleaning or solvent cleaning of surface, metal surface imperfection/defects, surface profile of blast cleaned surface using right inspection tools.
• Assesses surface cleanliness soluble salt contamination on blast-cleaned surface and related test such as pull-off test & reports.
• Able to handle painting inspections in blasting and painting inspection of tank coatings, ship hull painting, and structural items
• Coordinates Request for inspection (RFI) to third party and client paint inspectors on hold point and witness point as per project inspection test plan (ITP).
• ·Able to send enquiries to Paint manufacturers for Painting Specification in accordance with project Requirements and Secure Quality document for painting; Inspection & Test plan, blasting and coating procedure.
• Ensures calibration certificates of painting instruments are valid & available for reference
• Supervises the workplace and workers safety.
• Ensures coating is practical and in accordance with the specified requirements by preparing or reviewing drawings, specification, job instruction and material selection notes etc.
• Reviews Inspection Test Plan (ITP) as per project specification and procedures
• Coordinates and perform Coating inspection of structural, piping and outfit works etc. of the assigned project as per approved ITP.
• To monitor all painting/coating related works and ensure all final products meet project specification requirement.
• Conducts surveillance inspection of surface preparation, paint mixing, WFT, DFT adhesion and curing of paints.
• Coordinates with yard QA/QC team for all quality documentation submission to SCM with the construction completion.
• Conducts onsite audit as per relevant specification and customer requirement.

Structural

• Takes charge of project and carry out all QA functions for the assigned project.
• Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
• Monitors and ensure all piping works are carried out according to the latest revision piping drawing and complies with contract specification, class requirements and quality management system.
• Coordinates all the inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
• Materials verification done with the specified mill certificates and codes;
• PMI testing on incoming, welder material;
• Verifies material use on sites are approved project materials;
• Familiarizes with piping inspection process;
• Verifies NDT are done as per approved NDT plan & procedures.
• Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
• Ensures project documents including inspection, traceability records, certificates, radiography films, and NDT reports are submitted to relevant party to signing.
• Checks and endorse inspection record prior to issue to customers.
• Ensures subordinates comply with company’s procedure and work instructions.
• Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
• Implements and compile the monthly key performance indicators (KPI) related to piping.
• Verifies piping MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.
• Performs others duties as signed by the superior(s) from time-to-time.

Requirements

• Degree or Diploma in Mechanical Engineering / Marine and Offshore or equivalent.
• Minimum 5 years of relevant work experiences in shipbuilding / oil and gas / offshore projects as QA/QC Structural Inspector.
• Working in FPSO/FSO/FPU Project will be added advantage.
• Shall be familiar with AWS D1.1, API 2X, ASME Section II, and ABS Class rules.
• Certified Welding Inspector (AWS CWI or CSWIP 3.1)
• NDT Level II in RT/UT/MPI/PT

Our Address and Working Hours:

Seatrium Limited

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Seatrium Limited

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 7:30am - 5:15pm

Fri: 7:30am - 4:15pm

Seatrium Limited

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Ltd and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• To plan, coordinate and execute quality assurance and quality control of project
• To ensure all products are executed in accordance to contract specifications
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• Any other ad-hoc duties as and when assigned

Requirements

• At least 5 years experience in LTA MRT Projects

About the Role

Within an Agile framework, our team provides testing as a service to various squads within a banking and finance domain Agile Release Train. This role ensures the seamless transition of new features and applications into the production environment. We are looking for a new team member to enhance our testing capabilities and collaborate effectively with squads.

Key Responsibilities

• Collaborate with squads to develop effective test strategies and plans.
• Review and analyze user stories with a focus on testing and testability.
• Execute test cases, document results, and report defects in an audit-compliant manner.
• Support squads in troubleshooting and resolving defects during the development process.
• Develop and improve test automation processes, working with fellow test engineers.
• Provide continuous feedback by reporting defects and issues to the squads.
• Ensure quality throughout the change process by working closely with the squads.
• Enhance the testing service through continuous improvement initiatives in collaboration with fellow testers.
• Support the transition of changes into production by conducting post-release testing and support, including training for support team members.

Requirements

Must Have

• Proven experience as a Quality Assurance Tester, preferably within the financial industry.
• Familiarity with Agile frameworks and QA methodologies.
• Experience testing both in-house developed applications and vendor-based systems.
• Excellent understanding of functional and workflow-based system designs spanning multiple interconnected systems.
• Solid knowledge of securities lending, repo, and back-office processes, including:Settlement workflows (e.g., DVP, FOP).
  Corporate actions and their impact on securities positions.
  Familiarity with trading, collateral management, and financial workflows.
  
• Experience working with Temenos T24.
• Proficiency in using Jira and other testing software/tools.
• A positive, can-do attitude with high motivation to acquire new technical and functional skills.
• Ability to work independently with minimal supervision.
• Strong communication skills in English.

Nice to Have

• Experience with test automation and management tools such as Selenium, Tosca, or X-Ray.
• Knowledge of financial messaging standards like SWIFT (MT5xx series) or ISO 20022.

Key Responsibilities::

• Develop and implement QA strategies, test plans, and metrics to ensure software quality and team performance.
• Lead, mentor, and collaborate with the QA team for task delegation and high performance.
• Oversee testing phases, prioritize scenarios, and ensure comprehensive coverage across platforms.
• Identify, document, track, and resolve defects while collaborating on process improvements.
• Drive automation adoption, improve efficiency through scripting, and maintain testing tools/environments.
• Ensure adherence to industry standards, security, accessibility, and regulatory requirements, promoting a quality culture.

Key Requirement:

• 5+ years in software quality assurance, including 2+ years in a lead role.
• Expertise in web app architectures, SDLC, testing methodologies, and Agile/Scrum.
• Hands-on experience with Selenium, JIRA, Postman, and similar tools.
• Proficient in Test Automation frameworks like pCloudy, Katalon Studio, and others.
• Experience with performance testing tools (JMeter, LoadRunner) and cloud testing environments.
• Strong programming/scripting skills in Python or JavaScript.
• Familiar with CI/CD pipelines, DevOps, and cloud technologies (Amazon Cloud, EKS).
• Experience with testing frameworks for Svelte-based web apps (e.g., Playwright, Vitest).
• Hands-on experience with mobile testing frameworks for Flutter (e.g., Flutter Driver, Appium).
• Familiarity with Linux and Windows environments.

Apply, please kindly email your updated resume to [email protected].

Only shortlisted applicants will be notified.
APBA TG Human Resource Pte Ltd (14C7275) || Akshya R (R24122440)

• Location: Boon Lay
• $2300 - $2500
• 5.5 Days Alt - 8am to 5pm, 8am to 12pm
• Perm Role

Job Scope:

• Perform routine quality checks on raw materials, in-process products, and finished
  goods.
• Assist in monitoring production processes to maintain quality control and food safety
  guidelines.
• Assist in internal/ external and regulatory audits.
• Prepare and maintain relevant food safety records.
• Assist with maintaining quality documentation, ensuring all records are up-to-date and
  accurate.

Requirements:

• Diploma in Food Science / Technology or similar
• Min 1 year experience in QA/ QC role
• Singaporean Only

Kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

EA Reg. No: R1880058 | Dylan

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Responsibilites

• Facilitate improvement projects initiatives derived from Quality, Process and
  Productivity concerns.
• Initiate process streamline on new device configuration leads to defect prevention.
• Participate with customers status of projects in-line with internal Quality issue improvement.
• Follow-up closely with supervisor & team to monitor improvement project status and closures.
• Perform regular monitoring and audit verification of the committed actionable
• Maintain updating of the relevant QMS system for QA (NPI/QCAR/FMEA/Control Plan).

Requirements

• Degree in Electronics or Engineering or related field.
• Basic knowledge in MS office (Word, Excel, PowerPoint).
• Good communication and interpersonal skills both verbal and written.
• Knowledge in basic manufacturing solving problem tools (8D, FMEA, Control Plan) and statistical tools (SPC) are an advantage.
• Highly motivated to learn new skills / systems / analytical tools used in manufacturing operations.

Job Description

• Industry/ Organization Type: Manufacturing & Production
• Position Title: QA Executive/Senior QA Executive
• Working Location: Redhill (Near to the MRT)
• Working Hours: 5 days a week (Flexi Hours)
• Salary Package: Up to $5000 (Basic) + $88 (Fixed Allowance) + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Conduct regular quality assessments to troubleshoot and resolve issues with product functionality.
• Partner with R&D to evaluate new products or parts and generate detailed quality reports.
• Execute functional, performance, and reliability tests.
• Maintain compliance with Quality Management Systems, including ISO 9001.
• Provide expert QMS advice and lead continuous improvement efforts across all business units.
• Manage ESG projects from initiation to completion, aligning with corporate sustainability goals.
• Create and oversee project plans, timelines, and budgets, ensuring efficient resource coordination.
• Lead cross-functional teams to deliver projects on schedule and within budget.
• Perform additional duties as delegated by the team leader.

APPLY NOW!!!

• Bachelor’s degree in Electronic and Electrical Engineering.
• At least 2 years of experience in operations, quality, and engineering within the manufacturing sector.
• Proficient in Quality System Standards, including ISO9001, ISO14001, and ISO45001.
• Solid understanding of sustainability concepts, ESG frameworks, and current industry trends.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

We are looking for QA Tester/Test Lead to join one of the government agency in Singapore!

• Basic up to $7,600
• Working location: Pasir Panjang
• Exciting opportunity to work with a team of professionals to deliver high quality applications

Responsibilities:

• Establish quality assurance deliverables for stories in upcoming iterations/sprints, for functional and non-functional test areas
• Responsible for test strategy/plan, traceability matrix, test suite (test cases & scripts, test data) and test results analysis and reporting
• Work closely with development team to identify estimation of testing scope and timelines
• Confirm the validation and acceptance criteria with Business Analyst Team
• Responsible for creation, maintenance and conditioning of test data.
• Be an advocate for the role of testing within the SDLC and DevSecOps, be a champion for Quality
• Provide and maintain test documents which include test plan, test scripts (manual and/or automation), test summary report, defect logging and defect pattern analysis
• Managing the test team – assign tasks, set priorities and monitor progress of the test team. Provide guidance, support and training to team members as required

Requirements:

• Singaporean only
• At least 4-8 years of working experience in Software Manual Testing (Web Application)
• Experience in Agile development and testing methodologies
• Possess testing certifications will be an advantage (eg. CSTP, CTAL)
• Organised and meticulous in planning, managing and executing testing activities

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email [email protected].
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Liew Chien Hui - R2090138

ScienTec Consulting Pte Ltd - 11C5781

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

• Ensure all services provided by the centres adhere to or surpass internal quality assurance standards and guidelines.
• Conduct regular audits to assess regulatory compliance, reviewing internal processes, procedures, and identifying potential high-risk areas of non-compliance according to regulatory standards.
• Contribute to quality improvement initiatives aimed at enhancing the standards of early childhood care and education across the centres.
• Maintain consistency with the corporate identity and branding guidelines within the centres.
• Ensure the team fosters a safe, nurturing environment that promotes children's social, emotional, physical, and intellectual development.
• Promptly escalate any issues or concerns to the management team for timely resolution.
• Well-versed with the ECDC Act and its requirements.
• Familiarity with SPARK QRS-U standards.
• Ensure centres comply with all relevant regulatory standards and requirements.
• Develop and implement action plans to meet Licensing and SPARK certification standards.
• Track and monitor centres' corrective actions, ensuring principals, supervisors, and staff follow through on corrective action plans, and review the effectiveness of these measures.
• Motivate and guide the team to achieve operational efficiency while maintaining the highest quality standards.

Requirements:

• Diploma in Early Childhood Care & Education (ECCE) or related discipline.
• At least 3 years of experience in a relevant field.
• Knowledge of quality and compliance management, with a strong understanding of early childhood regulations and standards.
• Experience in quality improvement systems and initiatives.
• Strong attention to detail with excellent analytical skills and the ability to assess and interpret data.
• Proficiency in Microsoft Office applications like Word, Excel, and PowerPoint.
• Preferably a Junior Executive with experience in Quality Control/Assurance or a related role.

We are seeking a highly skilled and experienced Software Quality Assurance (QA) Lead to oversee the testing and quality assurance efforts for our web application projects. The ideal candidate will ensure the delivery of high-quality software by implementing robust testing strategies, managing a team of QA engineers, and collaborating with cross-functional teams to meet project goals and timelines.

Role & Responsibilities:

• Develop and implement QA strategies, test plans, and scripts for web and mobile applications.
• Lead and mentor a QA team, fostering collaboration with development and other stakeholders.
• Oversee all phases of testing, including functional, regression, performance, and security testing.
• Manage manual and automated testing efforts across multiple platforms (PC/Android/iOS).
• Identify and resolve software defects, collaborating with development teams to improve processes.
• Drive the adoption of automation testing frameworks and tools, optimizing test environments.
• Ensure compliance with security, accessibility, and regulatory standards.
• Promote a quality-focused culture throughout the development lifecycle.

Ideal candidate:

• 5+ years in software quality assurance, including 2+ years in a lead role.
• Strong understanding of web application architecture, testing methodologies, and SDLC.
• Experience with QA tools (e.g., Selenium, JIRA, Postman) and automation tools (e.g., Katalon, pCloudy).
• Familiarity with CI/CD pipelines, Agile/Scrum, and DevOps practices.
• Knowledge of performance testing tools (e.g., JMeter, LoadRunner) and scripting languages (e.g., Python, JavaScript).
• Hands-on experience with mobile and Svelte-based app testing frameworks.
• Strong leadership, problem-solving, and communication skills.
• Familiarity with Linux, Windows, Amazon Cloud, and EKS.

The plant in Singapore (located in Jurong Island) combines monomer and polymer production. It is the result of exceptional investments and aims to support strong daemnd from the customers in Asia.

We are inviting passionate individuals to COME and JOIN us! Be part of our team, ARKEMA! We are seeking a self-driven team player with excellent communivaion skills and able to work independently with minimum supervision, equipped with excellent data collection and analysis and attentive to details.

This position reports to the Lab & QA Manager in Singapore. In addition, there will be matrix reporting and candidate must be comfortable working in a complex matrix reporting environment.

OBJECTIVES

• Comply with company quality assurance standards.
• Coordinates External and Internal Non conformance Systems.
• Document and track quality issues to identify trends and areas for improvement.
• Upkeep Lab Quality KPI including monthly report.
• Create a comprehensive monthly, quarterly and yearly overview of non-conformances; determining trends and insights.

QUALITY (40 %)

• Lead implementation of quality assurance procedures and policies.
• Mange document system for QA&QC.
• Assist management of quality master data in SAP and release of products.
• Provide training and support to employees on quality procedures and standards.
• Lead with cross-functional teams of the plant to identify quality improvement opportunities and ensure timely resolution of issues.
• Conduct internal audit to assess compliance with quality standards and regulatory requirements.
• Ensure readiness for Quality audit (internal and external).
• Continuously improve the effectiveness of the quality management system.

PRODUCT SUPPORT (50 %)

• Provides the voice of the customer (VOC) as needed to ensure customer satisfaction and is the site quality contact for customer quality representative.
• Manage quality customer requests.
• Leads and/or participates in customer audits (including corrective & preventive action plan follow up).
• As a support to Sales and BD teams, leads complaints investigation based on complaint severity & customer requirements, up to and including containment processes and corrective and preventive actions (CAPA). The goal being to provide a timely, effective, response to the customer, utilizing various root cause analysis methodology (8D,5 Why etc.).
• Coordinate main MOC with customers: Packaging changes, RM changes, new assets homologation plan set up (internal / external) and execution follow up.
• Leads establishment & maintain of Customer Specifications ensuring plant capabilities are taken into consideration.
• Leads or provide support Io ensure product certification as needed.
• Assist Process team and Production team to master product quality, to homologate new raw material and new packaging.
• Maintain Raw Material Specifications.
• Hold responsibility & manage product orientation and / or derogation.
• Coordinate new product homologation.
• Coordinate transfer grades from other manufacturing site.
• Support to the production wheel management for polymer unit.

HEALTH, SAFETY AND ENVIRONMENT (10%)

• Attend, participate and contribute to HSE programs and initiatives (zero target LTI, waste management, etc.
• Be an example and comply to HSE policies at any time.
• Carry out laboratory safety audits and ensure compliance.
• Conduct risk assessments.
• Enforce waste management.

SKILLS REQUIRED:

• Degree in Chemistry or equivalent with at least 5 years if relevant experience.
• Sound knowledge on organic chemistry, polymers or equivalent, Quality Management, ISO 9001
• Well versed with Microsoft Office applications, SAP and SPC is a must.

Education: Degree in Chemistry or equivalent, with minimum of 5 years of relevant experience in chemical industry.

Knowledge: Organic Chemistry, Polymers orequivalent, Quality Management, ISO9001

Skills: Microsoft Office applications, SAP, SPC are required.

Posted Job Advert

Today, Lonza is a global leader in life sciences operating across five continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

Responsibilities:

• Support day-to-day Quality Assurance activities in accordance with approved SOPs / Policies for a multi-product, GxP contract manufacturing facility
• In depth awareness of entire process; identifying operational factors which influence the process
• A competent Reviewer and Approver of SOPs, protocols, reports or records
• Can trouble-shoot and able to weigh up all information and consideration in order to choose the optimum path to be taken
• Demonstrate ability to lead a small project and manage the deliverables effectively Develop good working relationships with internal & external customers
• Plan for future activities and coordinate with other departments to complete this
• Develop skills to be Qualified Trainer in area of expertise
• Able to participate actively or lead in deviation investigations, change controls and CAPA plans
• Able to lead, review and approve deviation investigations, change controls and CAPA plan as required
• Perform material release and qualification, joint inspection to identify material defect and review vendor’s investigation report as required
• Review executed batch records and logbooks and ensure that deviations are raised
• Provides Quality oversight for Operations document changes (e.g. MBRs, SOPs, Forms, Logbook, etc.)
• Provides QA oversight in any customer project related activities

Requirements:

• Bachelor's degree with 5-7 years’ experience in Quality Assurance in the Biopharmaceutical industry.
• Familiarity with Regulatory requirements and local Codes & Standards (e.g., FDA, EMEA, and ICHQ7)
• Fair knowledge and experience of the practical and theoretical requirement of quality management system in a GMP facility
• Good oral and written communication skills
• Team player, with strong focus on safety, quality and timelines
• Able to operate independently with minimum supervision for routine work within established policies and procedures and receives detailed instructions on new projects and assignments.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Job Description & Requirements

• Leading root cause analysis & corrective action in non-conformance investigation

• Establishing quality inspection plans, COC, procedures / work instructions / API testing

• Responsible for performing gap analysis on standards revision and revise procedure / work instructions

• Attend to customer/ supplier / internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent

• Min 1 year of working experience in Oil & Gas / Metal Machining Industry

• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

• Able to work 5.5 workdays

2. SKILLS

Web Testing

Tactics

Game Development

Strong Attention To Detail

MetaL

Unit Testing

Investigation

Root Cause Analysis

Quality Inspection

Machining

C#

Debugging

API

Mechanical Engineering

C++

Position: QA/QC Assistant (Job ID: 19415)

• AWS + Variable Bonus

Company: Trading Company

Location: West

Job Description:

➤ Carry out daily hygiene inspection to ensure stringent reinforcement of food hygiene safety in practice.
➤ Perform routine quality checks on raw materials, in-process products, and finished goods.
➤ Prepare and maintain relevant food safety records.
➤ Ensure microbiological laboratory carried out are according to Companies and Governments’ regulatory standards.
➤ Assist in monitoring production processes to maintain quality control and food safety guidelines.
➤ Assist in customers’ feedback and discuss with relevant departments on the corrective and preventive actions required.
➤ Assist in internal/ external and regulatory audits.
➤ Assist with maintaining quality documentation, ensuring all records are up-to-date and accurate.
➤ Ensure sanitation practices and pest control system are in place at all times.
➤ Work closely with production staff to foster a culture of quality and continuous improvement.
➤ Other ad-hoc duties as assigned from time to time.

Job Requirements:

➤ Minimum Diploma/ Advanced/ Higher/ Graduate Diploma, Bachelors’ Degree in Food Science/ Technology.
➤ Minimum 1-2 years of experience as a QA/ QC role in Food Manufacturing industry would be preferred.
➤ Strong attention to detail with excellent documentation and organizational skills.
➤ Ability to work well in a fast-paced environment and handle multiple tasks.
➤ Ability to work independently and as part of a team.
➤ Proficiency in English and Mandarin to liaise with Mandarin speaking production staffs and associates.

Interested applicants please send your resume to Jing Ling with email subject header “Job Application for QA/QC Assistant (Job ID: 19415)”.

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.
http://www.pasona.com.sg/privacy.html

Tan Jing Ling

EA Registration No: R24124404
Pasona Singapore Pte Ltd
1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246
Direct: +65 6239-4223 | General: +65 6732-6933 | Fax: +65 6733-2761
Email: [email protected]

URL: www.pasona.com.sg

EA License No:90C4069

Job Responsiblities

• Operate and maintain Probe card analysers and QA equipment
• Prepare / debug test files for probe card certifications
• Involve in the investigation and troubleshooting of probe card related issues
• Work closely with relevant department, ensure QA section’s readiness to handle all certification needs
• Follow up and liaise with HQ / customer on new certification processes

Requirements

Years of Experience: Min. 2-3 years of working experiences in Semiconductors industries.

Education Level: Diploma/Degree in Electronics/Mechatronics Engineering or equivalent

Language Requirement: English

Commencement Date: ASAP

Workplace Location: Ang Mo Kio, Techplace 1 (easily accessible to public transport)

*Please apply this position via Apply Now button with the following informaton in the resume:

• Career work experiences and job responsibilities
• Current and Expected Salary
• Reason for leaving
• Date of Availbility
• Education background

*We regret that only shortlisted candidates will be contacted.

The QA Associate is responsible for ensuring all batches meet specifications, are manufactured in accordance with the validated process, and are compliant to cGMPs and regulatory commitments.

Detailed responsibilities:

• Providing quality oversight of CMs including being the initial point of contact for all quality-related issues.

• Escalating quality issues at CMs to Lilly QA management.

• Assisting in the establishment and revisions of Quality Agreements with affiliates and customers.

• Providing quality oversight of Lilly/APIEM Quality Plans.

• Coordinating and perform QA responsibilities of API shipments.

• Participating in regulatory inspection preparations with CMs.

• Providing on-site support during manufacturing events and inspections.

• Participating on the Technical Review Board.

• Evaluating and dispositioning of API batches, if required.

• Ensuring that documented checks have been completed for the Certificates of Testing and Certificates of Environmental Monitoring (where applicable), and deviations, changes and batch documentation that demonstrates requirements have been met prior to batch release.

• Providing quality support of API manufacturing with the focus on holistic review of key activities associated with or impacting the manufacturing processes including deviations, change controls and countermeasures.

• Assessing the impact of deviation investigations and changes and ensure that all appropriate records are documented and retrievable.

• Ensuring all processes are in an appropriate state of control.

• Maintaining awareness of external regulatory agency findings which individually or collectively reference the quality of the product.

• Reviewing and approving documents including, but not limited to, procedures, master production records, change control proposals, deviations, equipment qualifications, and computerized system validations.

• Participating in APR activities.

• Participating in projects to improve productivity.

Basic Requirements:

• BS in STEM discipline (Chemistry/Biochemistry strongly preferred)

• GMP manufacturing knowledge and/or experience in API or finished product manufacturing, QC, QA or Engineering

• Demonstrated ability to function in a cross-functional team environment and to provide technical leadership

• Demonstrated ability to manage and prioritize competing priorities

• Strong written and verbal communications skills with various audiences

• Ability to influence diverse groups and manage relationships

• Willingness to relocate to contract manufacturing site or an estimated 3-year assignment before returning to designated Lilly site

Additional Preferences:

• Experience in quality support for Drug Substance manufacturing activities

• Thorough technical understanding of quality systems and regulatory requirements

• Knowledge of pharmaceutical manufacturing operations

• Demonstrated coaching and mentoring skills

• Experience in root cause analysis

• Demonstrated application of statistical skills

• Proficiency with computer system applications

Additional Information:

• Must complete required training for API EM Quality Assurance

• Some international travel (<25%) is required primarily to Indianapolis, Indiana

Some off-shift work (night/weekend) may be required to support 24/7 operations

**QA Asst. Managers/Leads are more than welcome to apply too**

· Overall responsible for the quality control and assurance functions.

· To lead, manage and mentor the QA team, and to ensure a productive and high-performance work environment.

· To provide effective and efficient technical support services to support the company’s business growth and operations.

· To develop and revise the quality assurance framework for the company and to modify and improve the existing production standards and Standard Operating Procedures (SOPs), when necessary.

· To collaborate with all departments, customer, suppliers and government regulatory bodies to ensure that quality is a high priority in the company.

· To drive projects and processes to ensure compliance with the various food safety and hygiene standards and requirements.

· To lead and report on quality audits, identify and resolve problems highlighted in yield reports.

· Ensure that all food safety, quality related and non-compliance issues are investigated and that corrective measures are implemented and adhered to.

· Oversee of GMP and food safety training for Production personnel.

· To be in-charge of the application and submission of government grants.

· To be involved in the feasibility study for setting-up overseas factories.

Job requirements

· Bachelors’ Degree in Food Science & Technology or related field.

· 4-5 years of relevant experience in food processing industry

· Able lead, guide and manage a small team with effective communication skills

· Proficient in MS Office

· Good analytical and problem-solving skills

· Well-versed with HACCP, HALAL, GMP and other food related regulations in Singapore.

• QA (HSSQE) & Vetting Head reports directly to Senior Manager (SM) or General Manager (GM) Fleet Operations.
• Hold the position of DPA and reports directly to Managing Director (MD) on breach of HSSQE matters.
• Establishing, communicating, deploying and maintaining of Company’s Health, Safety, Security, Quality and Environmental related policies and procedures; including the preparation and maintenance of relevant supporting documents, and the provision of training as required.
• Ensuring the companies compliance with relevant flag state/ class approvals/ IMCA, ISO 9001/14001/45000 QMS and Health, Safety, Security and Environmental requirements through formal/informal and internal/external audits and leading the Audit Program.
• Implementing, maintaining, reviewing of Company’s Safety Management System work manuals and procedures, including maintenance of HSSQE related certifications and local regulatory requirements.
• Plan, organize and take lead to drive safety initiatives and promote safety culture within the company and sub-contractors.
• Take lead to conduct vessel safety audits/ inspections to ensure compliance to legal legislations and organizational requirements. Ensure all appropriate investigation of discrepancies, error, complaints, failure, or findings are properly closed, documented, and communicated.
• Lead the Quality Assurance Committee (QAC) for quarterly meeting and Management Review (MR) annually. Submit the reports for SM & MD’s review and comments.
• To prepare and supervise the programme of Internal & External Audits within the office and for the fleet. Monitoring the timely implementation of all drills and audits of the Company and the managed vessels and ensuring the audit results are reported to the SM & MD.
• Lead the incident investigation team and prepare concise investigation reports in accordance to the regulatory and industry requirement.
• Develop effective communication materials and collaterals (include but not limited to safety messages, advisories, campaigns, posters, etc.) for fleet outreach and learning.
• Ensure proper maintenance of policies and procedures for office facilities.
• Supporting the Crewing, Vessel Operations, Technical, and Insurance departments in safety related matters, including interface with clients, underwriters, industry organizations and regulatory authorities.
• Lead the Emergency Response Team and conduct annual office/ship drills.
• Managing the HSSQE reports required by major oil companies and charterers.
• Manage Company’s tanker fleet’s vetting issues ensuring that the vessels are always maintaining a valid SIRE approval and when required a valid CDI approval as well. Maintain
• Company’s managed Bulkers to meet Right Ship vetting requirements.
• Ensure tanker vessels SIRE validity are meeting ‘Charter Party’ requirements so that vessel will not breach the ‘Charter Party’ clause under “vetting” requirement barring company policy limitation.
• Ensure effective close out of all non-conformances, observations and deficiencies resulting from SIRE inspections.
• Reporting to the SM and CST Management periodically on the vessels’ vetting status, planning and progress including any on-going issues if in case of any difficulties encountered that may cause rejection by either Charterers or the Pool partners operating the respective vessels
• Leads the communication with major oil companies on a regular basis checking Company’s MR ratings and approvals.
• To maintain and update quarterly KPI on vetting and tracking of vessels’ performance versus set targets until the final Management Review on overall vetting performance.
• Keep the ship owners updated with fleet vetting plan and status periodically as required by the owners.
• Ensure vessel screening requirements from major oil companies (MOC) and charterers are attended on timely manner for vessel to be approved for business.
• To carry out pre-vetting exercise for the fleet and to attend SIRE inspections with the appointed inspector.
• To update and share with the fleet on SIRE findings to prevent recurrence.
• Manage all aspect of commercial operations to ensure safe delivery of cargo and services. Lead and provide suitable strategic direction in commercial operations to complement and support Charterer/Owner’s business objectives and strategy.
• Manage Company’s tanker fleet’s vetting issues ensuring that the vessels are maintaining always a valid SIRE approval and when required a valid CDI approval as well. Maintain Company’s managed Bulkers to meet Right Ship vetting requirements.

Authority

• Amend, delete or introduce procedures in the Company’s Safety Management System as recommended by the QAC and approved by the Managing Director and/or General Manager.
• Schedule QAC meetings; discuss Internal and External Audit findings, Management and Master Review reports, and non-conformities in Safety and Pollution Prevention Practices/Trainings/Drills, Accidents reports and Quality Management Reports.
• Propose amendments, revisions to the Safety Management System to prevent recurrence of detected nonconformities to the systems and/or procedures.
• To prepare the plans and instructions for the key shipboard operations and assigning them to the qualified personnel.
• Collect reports of suggestions/complaints from customers, suppliers, vessels, etc. and formulates continuous improvement programmes to the Safety Management System.

Job Description:

• Monitoring the entire production line with quality issues.
• Work with internal teams to improve the quality of the products
• Familiar with various inspection techniques and able to act as an auditor for quality system

Requirements:

• Require to travel to our malaysia's plant
• Minimum 1 year working experience in manufacturing field
• Previous work experience as a QA Engineer or any similar role
• Minimum Diploma/ Post-secondary/ Polytechnic in engineering or equivalent

Product Executive (QA/UAT)

Location: Midview

Salary: Up to $3,800

Testing & Quality Assurance (Information & Communication Technology)

We are seeking a skilled individual with experience in User Acceptance Testing (UAT) and Quality Assurance (QA) to enhance the stability and reliability of our application. This role involves being the primary point of contact for identifying and verifying bugs and issues, effectively communicating with the development team to address these concerns and conducting thorough UAT before each app release. The ideal candidate will possess a keen eye for detail, strong problem-solving abilities, and the capacity to work collaboratively with technical teams to ensure the highest quality of our software products. This is an opportunity to play a pivotal role in maintaining and improving our app's performance, directly impacting user experience and satisfaction.

Responsibilities:

Candidates will be responsible for performing functional front-end testing across iOS apps, Android apps, and web platforms. The goal is to ensure products meet the highest standards of quality and reliability, with a focus on testing user interfaces, workflows, and responsiveness to maintain cross-platform consistency and adherence to specifications.

The role involves developing and documenting detailed test plans and test cases that align with business requirements and user stories. Candidates should be proficient in executing these plans efficiently, optimizing test coverage, and identifying key areas for focused testing.

Candidates will conduct thorough regression testing to ensure new features and bug fixes do not affect existing functionality. This requires proactively identifying potential risks and collaborating with internal teams to prioritize and resolve issues.

Strong attention to detail is essential for identifying UI/UX inconsistencies and technical bugs. Candidates should possess excellent problem-solving skills to investigate and pinpoint technical issues effectively.

Candidates will document bugs in issue tracking systems (such as Jira), writing clear and concise reports, and ensuring timely communication with both technical and non-technical stakeholders. They will be responsible for following up on issues until they are resolved and validating the fixes.

Excellent communication skills are required to bridge the gap between technical and non-technical teams. Candidates must ensure critical information is relayed clearly and promptly, facilitating decision-making during product releases and major updates. Strong interpersonal skills are necessary to work in a collaborative environment and manage competing priorities.

Candidates are expected to contribute to the continuous improvement of internal QA processes by identifying areas for efficiency gains and implementing best practices in testing and documentation.

Finally, candidates should become proficient in all internal tools and stay up to date with evolving product features. They will also be responsible for creating training materials and documentation to support team knowledge sharing.

Qualifications and Requirements:

• Bachelor's degree in a relevant field, such as Computer Science, Product Management, or a related discipline.
• Proven experience in quality assurance and testing of mobile applications, with a strong grasp of QA methodologies and tools.
• Experience working in Agile/Scrum or DevOps environments.
• Experience with software testing tools, such as Jira.
• Solid experience in defining product specifications, user stories, and acceptance criteria.
• Exceptional communication skills to collaborate effectively with cross-functional teams, including developers and designers.
• Proficient in both written and spoken English
• Strong problem-solving abilities and the capacity to identify, analyze, and communicate technical issues.
• Detail-oriented with a dedication to delivering high-quality products to our users.
• Excellent organizational skills to manage multiple tasks and projects concurrently.

Interested applicants may apply, alternatively you may send in your CV to bexlyn.chiu[at]revup-proservices.com

Bexlyn Chiu

R1985241

EA 24C2366

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a QA Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Job Summary

• Promote establishment of GMP QA Office in Daiichi Sankyo Singapore Pte. Ltd. and settlement of QA management governance, and support QA management in newly established subsidiaries such as Daiichi Sankyo Australia Pty. Ltd.
• Promote QMS management in GMP area in Asia region as Head of GMP QA Asia
• Promote establishment of GMP QA Office in DSSG and settlement of QA management governance including recruitment of new QA staff in DSSG
• Support QA management in newly established subsidiaries such as Daiichi Sankyo Australia Pty. Ltd.
• Promote QMS management in GMP area in Asia region as Head of GMP QA Asia and strengthen regional GMP QA activities
• Enhance recruitment of new QA staff in DSCN and establish new governance structure in GMP QA Asia
• Report QA management matters to Head of Global GMP in a timely manner and collaborate with GMP QA Heads in other regions

Responsibilities (Major Accountabilities)

• Establishment of GMP QA governance in DSSG
• Quality Assurance activity management in DSSG
• Quality Assurance activity management in Asia region as part of Global GMP QA
• Quality Report to DSSG Head and Head of Global GMP QA
• Foster Quality Culture
• Establish MTS of GMP QA organization and activities for GMP QA Asia region

Qualifications (Education/Experience)

• Bachelor degree or above in Pharmaceutical or related science categories
• 5 years’ GMP-QA Management experiences
• QMS Management experiences
• Good English, Chinese and/or Japanese skill
• Bio knowledge preferred (to prepare for further ADC)
• DS-Product knowledge preferred