Job description:

As the RFFE Module design team leader, the candidate plays key design role in development and commercialization of MEMS Based RF-FE module for consumer electronics from new concept design, verification to mass production.

Candidates will designs develop, modifies, and evaluates electronic parts, components, or integrated circuitry for electronic equipment and other hardware systems on a multinational team basis.

Responsibilities:

- Co-working with international team including China and Singapore on a cross-disciplinary team basis

- Design and development of RF-FE modules to meet customer’s specification and needs

- Lead and produce 4G, 5G, WiFi module design, fulfil product lifecycle from engineering and transfer to production team

- Coordinate with engineering teams globally to produce module samples

Qualifications/Desired skills:

- Track record in commercialization of RF-FE modules.

- Broad understanding of RF analog component performance characterization via Smith Chart, tuning via passives, etc

- Extremely familiar with module application in RF application and have the ability to use advanced modelling techniques to design modules

- Strong skill in EM modelling and RF simulation tools Solid background in resonator/filter design, simulation, finite element analysis, layout, and package design

Responsibilities:

• The Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification.
• It is also expected that you will conduct periodic design reviews, including with application engineers.
• It is also expected that you will support test development and product development teams in bringing projects to production.

Requirements:

• PhD/Master’s Degree in Electronics/Electrical Engineering.
• Minimum 6 years’ experience in Analog or Mixed-signal IC design.
• Very good knowledge of CMOS processes.
• Highly proficient in analog and mixed-signal IC design EDA tools.
• Experienced in analog and mixed-signal circuit designs, such as regulators, DC-DC converters, low-power, low-noise biasing circuits and amplifiers, sigma-delta modulation and ADCs, etc
• Experience in design of high resolution, low power sigma-delta modulation preferred.
• Experience in design of ultra low power ADC preferred.
• Skilled in laboratory testing of IC prototypes.
• Knowledge of Linux operating system required.
• Experience in MEMS interface ASIC design advantageous.

The L1 IT Support Engineer (IT ServiceDesk) is accountable for providing a high level of satisfaction among students and staff by providing first-level support for all GESS standard software and hardware. This position entails the diagnosis and assessment of end-users' technical requirements, utilizing sound discernment to promptly address and resolve any issues that may arise.

The engineer's responsibilities encompass the identification, investigation, and resolution of technical issues, as well as the prompt and effective response to support requests from students and staff through in-person, email, and phone interactions. It is anticipated that they will document, chart, and monitor all issues to ensure that they are resolved in a timely manner.

Additionally, they may occasionally offer technical training and support to GESS personnel and students. The engineer is instrumental in ensuring that the team remains dedicated to providing exceptional support and satisfaction, and it is imperative that they adhere to the GESS values and expectations for customer service.

Furthermore, they may be obligated to oversee initiatives as necessary, thereby facilitating the continuous enhancement of technology services and support strategies within the educational environment.

Key Accountabilities

First-Level Troubleshooting and Support:

· Provide initial troubleshooting by guiding users through in person, via email and IT ticketing system, and over the phone while also offering remote desktop support using Remote Desktop Software.

· Deliver quality service to students and staff in all assigned tasks, consistently upholding GESS values.

· Ensure timely and effective solutions for any technical issues that may arise with GESS technology.

Incident Management:

· Log and track support calls in the designated GESS system(s).

· Prioritize and escalate tickets as required to maintain high levels of customer satisfaction.

· Identify trends in support calls and develop documentation to address frequently occurring issues.

Communication and Reporting:

· Report problems and issues promptly, notifying management of any increasing trends, unusual activities, or repeated issues.

· Provide regular updates to customers on the status of ongoing resolution efforts.

· Attend daily and weekly meetings as requested or required to stay informed and aligned with team objectives.

Continuous Improvement:

· Recommend improvements for technology or systems, including procedural steps, increased training, and enhanced documentation.

· Access and utilize software updates, drivers, knowledge bases, and FAQs to assist in resolving end-user issues.

Collaboration and Support:

· Assist other teams in initiating, designing, and managing effective support solutions as required by the school’s needs.

· Collaborate with internal second-level support and departmental tech teams (Divisional Tech Help Center) for escalated or reassigned tickets.

Technology Development and Testing:

· Support the development and testing of new technologies to ensure operational integrity and functionality.

· Proactively communicate ideas, expectations, and goals while working with others to achieve desired outcomes.

Service Level Agreement (SLA) Management:

· Follow up on tickets approaching SLA deadlines to ensure timely resolution and avoid SLA failures.

Other Duties:

· Perform additional tasks as assigned by the Director of Technology, adapting to the evolving needs of the school environment.

Knowledge and Experience

Education:

· Diploma in Information Technology, Computer Engineering, or Business Information Technology.

Technical Skills:

· Proficient in Windows OS and Apple products.

· Experience with Microsoft Office 365 and computer troubleshooting.

· Knowledge of Mobile Device Management (JAMF or Intunes) is a plus.

· Familiarity with ID Card and digital signature systems is advantageous.

Experience:

· At least three years of IT support experience, preferably in an educational environment.

Soft Skills:

· Strong customer service orientation and effective communication skills.

· Positive attitude, initiative, and the ability to work independently and under pressure.

· Team player with a cooperative mindset.

Adaptability:

· Willingness to learn and adapt to new technologies and evolving IT environments.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a Research Engineer who will be responsible working on a project on cyber security and privacy issues for IoT and cyber-physical systems.

Responsibilities:

• Design and develop techniques that detect attacks on IoT/CPS;
• Perform analysis and simulations to validate designs;
• Implementation and development of demos;
• Assists with the editing and preparation of manuscripts, reports and presentations;
• Participate in presentations and demos for exhibiting work at appropriate events

Qualifications

Requirements

• BEng/BSc/BTech in Electrical Engineering, Computer Science or a related field;
• Programming experience and knowledge of cyber security would be a plus;
• Possesses research background with ability to read and understand methodologies in research papers;
• A good team-player;
• Open to Fixed Term Contract

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a Research Engineer who will be responsible working on a project on cyber security and privacy issues for IoT and cyber-physical systems.

Responsibilities:

• Design and develop techniques that detect attacks on IoT/CPS;
• Perform analysis and simulations to validate designs;
• Implementation and development of demos;
• Assists with the editing and preparation of manuscripts, reports and presentations;
• Participate in presentations and demos for exhibiting work at appropriate events

Qualifications

Requirements

• BEng/BSc/BTech in Electrical Engineering, Computer Science or a related field;
• Programming experience and knowledge of cyber security would be a plus;
• Possesses research background with ability to read and understand methodologies in research papers;
• A good team-player;
• Open to Fixed Term Contract

Senior Testing Engineer

As part of IME’s Photonics & Sensors Department, the candidate will take lead for the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices
• Manage photonics laboratory including facilities management, health and safety, equipment calibration, inventory and stocktake
• Take on procurement duties for laboratory equipment and consumables
• Prepare technical presentations for internal meetings

Qualifications:

• Bachelor’s degree in Physics, Electronic/Electrical Engineering or equivalent
• Experience in optical/photonics device testing
• Experience in experimental data acquisition and analysis
• Critical thinking and problem solving ability
• Strong skills in communication and providing technical presentations
• Values teamwork and fostering a collaborative spirit
• Skillset in programming or instrument automation is a plus

Roles & Responsibilities

Job description:

• Responsible for day to day Operations and administration on network & security infrastructure
• Responsible for firewall security appliances, routers and switches particularly trouble shooting and/or debugging network related problems.
• Perform support, configuration and maintenance of network equipment and network operating System
• Perform basic Linux administration and able to configure, manage network application.
• Handle network projects and identify any missing components in the infrastructure and support future demands on the network infrastructure.
• Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities
• Must have experience in managing of Checkpoint firewall, Extreme, HPE, Cisco, Aruba Switches.
• Work with vendors to deliver the project scope and meeting project deadlines
• Proactively monitor network performance, ensuring high network availability and smooth operations
• Involve in Network and IT audit and adhere to security compliance and governance.
• Perform evaluation, proof of concept and provide recommendations.

Job Requirements:

• A Bachelor’s degree in Computer Science, Computer Engineering, IT or equivalent.
• Must be CCNA certified, CCNP preferred.
• Working knowledge plus at least a year’s experience in networking technologies like Structured Cabling, WAN, LAN, VPN, Network Security, Wireless, iBGP, eBGP, Routing Protocol, OSFP etc.
• Hands on experience in implementing, administering and troubleshooting network infrastructure devices, including cisco, Brocade routers, Dell enterprise and cisco switches, network firewall, IPS, SIEM, vulnerability assessment and monitoring tools.
• Experience in IPv6 and Data Centre operations an advantage.
• Familiarity with Linux (as a user and system), container technology, security concepts, project management and ITIL processes will be added bonuses.
• Familiar with Dense wavelength division multiplexing DWDM) is a plus.
• Familiar with basic Linux administration is a plus.

Responsibilities

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

Requirements

• Diploma/Degree in Engineering/Science/Production/IT

• Preferably experienced in high-tech, high-vol manufacturing environment

• Good leadership and communication skills

• Willing to work 12-hour shifts (day or night)

Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society.

Purpose of the Job

Sulzer Chemtech’s expanding licensing portfolio is delivering exciting new low-carbon solutions to customers as they navigate the ever-changing world of sustainability. Our client base faces challenges from multiple fronts and are turning more and more to technology-providers for a roadmap that will lead them to a successful future. This requires us to be more creative and more responsive than ever before as we work as a global team to propose and sell our product, technology, and service portfolios. We are looking for a Senior Technical Sales Engineer that understands customer needs in providing technical support and crafts winning proposals in support of sales strategies with the help of team members and technology experts.

Your main tasks and responsibilities:

• Will be part of Global Technical Sales team led by Technical Sales Director
• Responsible for generating proposals independently most of the time working with guidance from Technical Sales Director
• Study customer’s specifications: review, interpret, understand, and identify bid requirements.
• Prepare complete deliverables for the full technical proposal producing simulations, material balance and utility requirements, Process Flow Diagrams, equipment sizing and design, Capital Cost Estimation
• Attend customer proposal review meetings as needed, presenting the technical details as required.
• Support commercial sales team based in China with technical inputs for customer sales visits and travel with them as and when needed.
• Develop opportunities with a focus on increasing market share and identifying new opportunities for Sulzer;
• Correct usage and timely update of CRM tool
• Drive the company’s risk management process for quoted opportunities
• Deliver Order intake results to meet annual targets.

To succeed in this role, you will need:

• Bachelor Degree in Chemical Engineering / Business or Equivalent.
• 5 to 8 years of experience in refinery, petrochemical, and downstream industry with basic understanding of process configuration
• Proficient with process simulation and design software’s like PROII, HYSYS, Aspen Plus etc.
• The ideal candidate has relevant sales experience in licensing and is passionate about technology, customer relationships, and results.

Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

We are proud to be recognized as a Top Employer 2024 in Brazil, China, Germany, Switzerland, the United Kingdom and the United States.

We are looking for Project Engineer to join our fast and growing team. You will be working with stakeholders on the following:

Job Description

• Execute and manage the project and responsible for the quality of work produced by the team and sub-contractor(s).

1. Projects
2. Documentation
3. Acceptance

• Co-ordinate, plan, conduct and manage the various activities within the project team, with the subcontractor(s), customers and document the progress of the project.

1. Project Schedule & Planning
2. Team Management
3. Risk Management
4. Prepare and Conduct PMR, PDR & CDR
5. Project Meeting
6. Knowledge sharing and conduct training
7. Prepare Operator and Maintenance Manual
8. Prepare and Conduct Installation, Checkout, Inspection and Testing
9. Conduct Factory Acceptance Test and On-Site Acceptance Test

Requirements:

• Degree with at least 3 years or Diploma with at least 5 years in Engineering related field
• Strong organisation skills and meticulous
• Team player with good communication and interpersonal skills
• System knowledge such as RFDF, EOIR & Radar will be added advantage
• Able to travel within a short notice is a plus
• Candidates with strong background will be considered for role of "Project Manager"

Interested applicant can click on 'Apply' or send updated CV to [email protected]. We regret to inform that only short-listed applicants will be notified.

Job Description

• Prepare project schedule in either MS Project or Oracle Primavera P6.
• Cost loading to the baseline programme
• Monitoring Critical path and Earn Value Management (EVM) analysis
• Prepare impact analysis for EOT claims
• Prepare working programme and float analysis
• Document control for relevant EOT event
• Monthly progress report and resource monitoring
• Handle on the change control

Requirements

• Degree/Diploma in Civil Engineering/Mechanical Engineering or any other engineering field with minimum 3 years of experience in project planning roles.
• Possession with CAPM or PMP certification will be an added advantage.
• Good analytical, communication and problem-solving skills
• Team player
• Strong analytical, critical, and logical thinking skills.
• Able to work independently with minimal supervision.

Epsilon operates a global IP/MPLS network as well as supporting transmission networks. We are seeking a candidate with strong IP/MPLS skills and experience. The candidate would be responsible for ongoing network optimization and technological development for our global IP/MPLS network which support layer2 and layer3 VPN services. The candidate should also express a willingness to participate in projects related to transmission network upgrades and planning exercises.

Responsibilities

• Responsible for the deployment and management of the global MPLS and VPLS (E-Line, E-LAN and IP-VPN) infrastructure.
• Work with solutions design, and technical sales teams to develop complex service solutions for bespoke customer applications.
• Responsible for the deployment and management of the global IP transit, IP peering, and the connection to IXP and CSP.
• Work cross-functionally with product team and project management to generate implementation plans including Method of Procedure (MOP), Bill of Materials (BOM) and Scope of Works (SOW)
• Participate in optical transmission network upgrades and migrations as needed.
• To take up the on-call rotation and out of hours work when required
• Maintain technical and training documentation and develop automation as needed.
• Provide guidance and training to NOC when required

Requirement

• 5+ years of working experience in telecom provider, ISP, CSP or content provider.
• Experience working within a multi-vendor network environment – Juniper, Alcatel-Lucent/Nokia and Cisco are relevant.
• Experience working with network automation tools (Ansible, Python, Jinja, Git) a plus
• Extensive knowledge and experience in Layer 2 switching and Layer 3 routing technologies and protocols including TCP/IP ,OSPF, BGP/MP-BGP, IS-IS, MPLS and RSVP etc.
• Experience working and knowledge in security and firewall.
• Experience working and knowledge in SD-WAN/SASE is a plus
• Knowledge or prior working experience with optical networks is a plus, but willingness to learn and understand the design and operational aspects of transmission technologies is required.
• Demonstrated ability to meet deadlines among multiple concurrent projects
• An enthusiastic and helpful attitude
• Willing to learn new technologies
• Must enjoy working in a fast-paced environment where a strong ability to multi-task is necessary
• Must be highly detail-oriented

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

A site engineer is responsible for the planning, design, and construction of civil engineering projects, such as roads, dams, bridges, and buildings. They are responsible for many aspects of a construction project, including:

• DesignSite engineers evaluate the soil conditions, topography, drainage, and environmental considerations to ensure the design is implemented successfully. They also draft blueprints.
• ConstructionSite engineers manage the construction teams, subcontractors, and equipment on the site. They also ensure that the construction adheres to safety regulations and project timelines.
• Quality assuranceSite engineers perform quality assurance tests to ensure that the materials and workmanship meet the required standards.
• Technical adviceSite engineers provide technical advice during construction work and identify and resolve technical issues.
• CollaborationSite engineers collaborate with clients, construction crews, architects, designers, and other stakeholders.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

Join our team within Chemtech division in Sulzer Singapore Ltd as Senior Applications and Sales Engineer to help us take our business to the next level.

In this role you will be accountable for:

• Prepare technical proposals and commercial tenders project
• Interface with customers and monitor progress of projects
• Co-ordinate projects with head office, regional offices and agents
• Prepare and co-ordinate all proposal activities with Regional Offices and Local Headquarters
• Carry out tender reviews and order reviews
• Handle technical clarification for all proposals. Work as an integral part (with technology, engineering, production) in developing proposals, pricing strategies and customer presentations
• Prepare price calculation and tender documentation
• Ensure that the specifications offered to the customer are within the capability and capacity of the company
• Ensure that the customers’ requirements are adequately conveyed and reflected in engineering, manufacturing and installation
• Follow-up projects monthly and update MIS daily
• Undertake sales and marketing of Sulzer Chemtech products and services throughout Asia Pacific region
• Control all correspondences and documentation relating to project. Co- ordinate and utilize inter-department resources where necessary.
• Ensure that all technical and commercial specifications are received, clarified and agreed with customer at order stage.
• Prepare complete project and engineering files
• Arrange project handover meeting with Project Management and Engineering for larger projects and non-standard
• Initiate Customer Complaint Reports to ensure that with complaints are properly and efficiently dealt with
• Feedback information to customers on quality improvements on product and changes, as and when necessary
• Supervise/Check the work of junior Applications & Sales Engineer if required.

To succeed in this role, you will need:

• Degree in Chemical Engineering
• 5 ~ 10 years of sales and customer services experience preferably in Chemical & Petrochemical / Oil & Gas industry.
• ProII / Aspen Simulation Program is optional, but not mandatory
• Microsoft Skills
• Distillation theory
• Fair knowledge of chemical separation processes knowledge Business travel (~30%), particularly in the Asia Pacific region.

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

83% of our employees recommend Sulzer as a good place to work and we are proud to be recognized as a Top Employer 2023 in Brazil, China, Switzerland, United Kingdom and United States. So come and join our story, starting today!

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Quality & Product Engineering diverse team of talent. You will be responsible for Quality control for Facilities and Fab use - UPW, Chemicals, wafers, Fab Environment and Incoming quality check of materials.

What you will be working on:

• Liaise and support fab engineering modules on requirements for ad-hoc requests
• Communicate to end user and follow up for OOC/OOS issues
• Manage, maintain and verify functionality of equipment and perform troubleshoot where required
• Responsible and accountable for work quality and integrity in all assigned tasks
• Participate in continuous improvement programs/ initiate action for continuous improvement in work processes, safety and quality standards
• To monitor and improve the performance of analytical tools and methods for analysis
• Responsible for safety and housekeeping of Lab work areas and environment
• Update in meetings for Pre alert/ Out of control/ shutdown cases
• Update and maintain documents for Lab operation and analytical tools
• Update and reporting of lab operation and issues
• In charge of arrangement for Lab manpower
• Internal audit of lab

More About You:

• Degree in Chemistry/ Material Science or equivalent
• 1- 3 year experience in semiconductor, manufacturing, Chemical Lab or/ and quality related experience preferred
• Basic to intermediate knowledge of analytical techniques
• Knowledge of Microsoft Excel, Win Word, Powerpoint, Tableau and Excel VBA
• Knowledge of requirements IATF16949, ISO17025, ISO 14000, OSHA 18000 will be an added advantage

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Quality & Reliability Engineering diverse team of talent. You will be responsible for end-to-end notification and communication process on product and process changes.

What you will be working on:

• Responsible in managing the end-to-end notification and communication process on product and process changes.
• Responsible in ensuring that changes are effectively communicated to customers through working with various stakeholders including the account facing teams & process owners.
• Be the Facilitator of engineering change requirements to ensure that both internal and customer requirements must be met.
• Manage the ECN scorecards with respect to implementation and closure with the relevant stakeholders.
• Tracking implementation progress and reporting back to management.
• Be the Facilitator for customer concessions and work with internal stakeholders/customers until concession closure.
• Participates in inter-departmental cross-functional projects.
• Analyzing common problems / root causes with possible suggestions for further improvements.

More About You:

• Degree in Chemical Engineering / Chemistry / Materials Science / Physics / Electrical & Electronic Engineering or equivalent.
• Minimum 3 years of relevant experience in semiconductor or automotive industry.
• Preferably with experience in SPC tool.
• Preferably with experience in Change Management & Concession Management

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Roles and Responsibilities:

· Interacts closely with Client/Customers regarding their technical questions.

· Supervised daily operations in the laboratory and ensures that all activities are align with the required standard/specifications and safety protocols.

· Prepares report on all laboratory tests, this include analysis and interpretation of the results.

· Contributes in business development opportunities for new services or new methodologies.

· Willing to conduct various laboratory tests (if necessary) I.e. Triaxial test, Consolidation test, resilient modulus test and soil classification test.

· Maintaining the equipment, ensures all equipment are calibrated with required accuracy and functioning properly.

· Ensures all the report are submitted to client as per scheduled deadlines.

· Monitor the status of all received sample from sample preparation to report submission.

Job Requirements:

· Bachelor’s degree in Civil Engineering, Geotechnical or a closely related field.

· Ability to work independently and as part of a team.

· Strong understanding of soil mechanics principles and behavior.

· Proficiency in Microsoft office specially at MS Excel.

· No experience but have strong knowledge/interest in geotechnical materials are welcome to apply.

Role: Laboratory Engineer (Geotechnical/soil testing)

Job Roles and Responsibilities:

· Interacts closely with Client/Customers regarding their technical questions.

· Supervised daily operations in the laboratory and ensures that all activities are align with the required standard/specifications and safety protocols.

· Prepares report on all laboratory tests, this include analysis and interpretation of the results.

· Contributes in business development opportunities for new services or new methodologies.

· Willing to conduct various laboratory tests (if necessary) I.e. Triaxial test, Consolidation test, resilient modulus test and soil classification test.

· Maintaining the equipment, ensures all equipment are calibrated with required accuracy and functioning properly.

· Ensures all the report are submitted to client as per scheduled deadlines.

· Monitor the status of all received sample from sample preparation to report submission.

Job Requirements:

· Bachelor’s degree in Civil Engineering, Geotechnical or a closely related field.

· Ability to work independently and as part of a team.

· Strong understanding of soil mechanics principles and behavior.

· Proficiency in Microsoft office specially at MS Excel.

· No experience but have strong knowledge/interest in geotechnical materials are welcome to apply.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Research Engineer position in the Department of Materials Science and Engineering at National University of Singapore (NUS).

With a strong focus on industrial projects, we are developing our exciting technologies beyond the lab scale. We are seeking a talented and experienced individual with expertise in material chemistry and chemical engineering to join us.

As a Research Engineer, you will contribute to industry project focusing on scaling up our electro-metallurgical battery recycling technology from lab to pilot scale. Your major focus will be developing a process to synthesize precursor materials (pCAM) with extracted metals from spent battery materials.

• Lead pCAM synthesis processes at the R&D and pilot scale by working in collaboration with engineering team.
• Able to establish process design and synthesis rules to obtain precursors with optimal composition, interfacial properties, crystal structure, particle size, morphology, and electrochemical characteristics.

Qualifications

1. Bachelor or Master in Materials science and engineering, Chemical engineering, Material chemistry, or any relevant field.
2. Minimum of 2 yrs experience in MHP, pCAM synthesis (precipitation, crystallization).
3. Prior experience in process development and piloting new technologies is highly preferred.
4. Experience with material characterization techniques like SEM/EDS, ICP, XRD, FTIR.
5. Strong analytical skills and experience in data analysis and interpretation.
6. Highly motivated, detail-oriented, and able to work independently as well as part of a team in a fast-paced academic environment

Role Summary

The role is responsible for delivering and managing cloud security and endpoint security services, assessing policies and rules, safeguarding SaaS applications, data and endpoints. You’ll collaborate with colleagues supporting network and architecture assessment, threat modeling, vulnerability assessment, and security operations. This position supports the Enterprise Security Transformation practice and is focused on engineering secure methods of utilizing cloud infrastructure services and software to improve the overall security posture. Cloud security engineers may instruct other teams on proper coding methods. They may also investigate, create, and recommend innovative technologies or other methods that will enhance the security of cloud-based environments.

Roles and Responsibilities

• Protects system by defining access privileges, control structures, and resources.
• Safeguards information system assets by identifying and solving potential and actual security problems.
• Recognizes problems by identifying abnormalities; reporting violations.
• Determines security violations and inefficiencies by conducting periodic audits.
• Consolidate root cause analysis of past pentest results.
• Upgrades system by implementing and maintaining security controls.
• Require periodic after-hours/weekend support.
• Any other duties assigned by the Team Lead/Solution Architect.

Job Requirements

• 3 years experience in AWS Cloud Security, Security Hub, Guard Duty, Inspector, etc.
• Strong understanding of SSDLC and security frameworks.
• Knowledge in OWASP Security Standards.
• In-depth knowledge of architecture, engineering, and operations of at least one enterprise IDS/IPS/SIEM platform.
• Hands on experience with vulnerability scanning and pentesting tools.
• Hands-on experience analyzing high volumes of logs, network data (e.g. Netflow, FPC), and other attack artifacts in support of incident investigations.
• Experience with identity and access management architectures and solutions including AD, RBAC, SSO, identity lifecycle management.
• Experience in IAM, secrets management, encryption technologies, SaaS services hardening, Kubernetes and container security
• Experience with Linux administration, shell scripting, and open-source security tools.
• Knowledge of security best practices in hardening and protecting cloud environments, networks, servers, endpoints, applications, and databases.
• Certifications in OSCP / CISSP / SANS / Other relevant security certifications.
• Excellent interpersonal skills, team player and independent worker.
• Ability to operate in a fast-paced work environment and deliver under pressure.
• AWS certification will be an added advantage.

This is for a year contract subject to renew.

Responsibilities

· Assure sites are properly stocked with test tools. And test tools are periodically calibrated per AT standards.

· Participate in the Factory Acceptance Testing in the lab and preparation of FAT plan.

· Lead site commissioning activities of radio-based train control systems, including Functional tests and System Acceptance Test (SAT) and System Integration Test (SIT) and ensure that all interfaces to the signalling system are appropriately tested.

· Lead test and commissioning of the On-Board, Wayside, and Radio system system

· Liaise with Engineering / supplier for any design changes and modifications necessary subject to test results

· Record, report, and endorse test results when appropriate.

· Ensuring that testing activities are carried out in timely, logical and cost effective manners.

· Work with Engineering team for the evolution of drawings (ie. mark-up, change order, and transmittals) until the as-build stage.

· Develop productive relationships with client’s teams to ensure successful handover and post-implementation operation of projects.

· Plan and schedule site ITC activities in accordance to the rolling programme, that align with the master programme

· Produce red correction based on the released drawings and correct and rectify failures occurs during T&C phase.

· Raise NCR(None Confirmity) / MNCR (Material None Confirmty) / Fault report during fault found.

· Consolidate / track the following; records, software, hardwares, field changes.

· Implement field change orders

· Prepare installation and test and commissioning procedures / method statement for the communication-based train control system

· Verify the quality of installation works and raise concern if there is a quality issue.

· Troubleshooting, analysis in case of any issues encountered.

· Able to have a good collaboration with the vehicle testers and wayside testers during interface testing.

· Lead / Support the department for the payment milestones related to the test and commissioning

Requirements

·Bachelor’s degree in engineering or related field.

·Minimum 3 years of relevant experience.

• Operate precision CNC turning/milling machine
• Perform CAD/CAM programming
• Interpret Engineering Drawings and Feature of Control Symbols
• Simple setting up of work piece and tooling set up
• Check and maintain machinery daily to ensure functionality
• Able to handle 8" to 12" chuck CNC Turn/Mill Machine, Fanuc control

Requirement

• Proficient in Quality Consciousness with the ability to meet productivity goals
• Must have good interpersonal communication skills and a positive team attitude
• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre

• Manage Field Service Representatives, the regional schedule as well as the local Service organization business goals and objectives
• Work closely with his team of field service staff in Singapore and beyond, to schedule, dispatch & coordinate their work assignments, and resolve scheduling conflicts
• Make data-driven decisions based on reporting from the company’s CRM system (C4C)
• Disseminate information to the field and maintain intradepartmental communication through written correspondence and regular conference calls
• Ensure compliance of field service staff with safety and performance standards, company and department policies, as well as business objectives
• Develop service quality standards, skills certification criteria, performance objectives and metrics related to field service
• Monitor staff performance and initiate correction action to resolve performance deficiencies through coaching, training, motivating, and disciplining
• Travel with field service representatives on a periodic basis to evaluate and improve performance
• Solicit customer feedback on SLM Solutions service performance through regular telephone interviews, e-mail correspondence and customer site visits
• Evaluate service requirements of the install base and maintain regional assignments and proper resource allocation to ensure satisfactory customer response
• Maintain complete and accurate records of field service activities
• Analyze field service performance data,produce status and summary reports as required
• Establish policies and procedures for producing effective service response and problem resolution for SLM Solutions customers
• Provide direction to field service staff to ensure complete implementation and compliance with department processes

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB
• Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845