Main Responsibilities

1. Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.
2. Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification
3. Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals
4. Prepare operational and maintenance schedule as per MIS
5. Work closely and collaborate with the customer support team to ensure customer satisfaction.
6. Identify potential upselling opportunities at client site during regular or ad-hoc maintenance
7. Remote monitoring of the system operation and performance and reach site if any emergency.
8. Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.
9. Working with a team and deliver the work within the planned schedule.
10. Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.
11. Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

1. Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent
2. Electrical or Mechanical troubleshooting experience would be advantageous
3. HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment
4. Strong communication and analytical skills.

Process Engineer is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis. Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor's degree in chemical engineering, materials science, microelectronics or similar disciplines.
• Knowledge in process engineering, process control engineering and yield enhancement preferred
• Knowledge in SPC, DOE, FEMA, and 8D reports
• Experience in semiconductor industry would be an added advantage
• Fresh graduates are welcome to apply

Responsibilities:

Operate, maintain, and improve various systems in the factory to ensure stable supply and quality for customers.
Handle operation and maintenance tasks for the ice machine and boiler system.
Perform operation and maintenance work for process pipelines and exhaust systems.
Carry out operation and maintenance activities for air conditioning and fire protection systems.
Manage the operation and maintenance of the clean room system.
Lead system improvement projects and execute HOOKUP planning.

Requirements:

Possess a Bachelor's Degree in Environmental Engineering, Chemical Engineering, Aerospace Engineering, Nuclear Engineering, Mechanical Engineering, Electrical and Electronic Engineering, or a related field.
Have a minimum of 1 year of working experience in a similar role.
Possess problem-solving and troubleshooting skills.
Excellent critical thinking skills and a high level of numeracy.
Demonstrate good communication and interpersonal skills.
Capable of working independently and handling stress effectively.
Must be willing to perform rotation shifts.

Job Responsibilities:

• Responsible for the architecture design and construction of the backend for social products and participating in technical planning.
• Responsible for the design of system software architecture, system modules, key components, and interfaces.
• Participate in writing core code, conduct project code reviews, continuously optimize code, and assist in resolving complex bugs.
• Adjust algorithm configurations in real-time based on business requirements.
• Participate in technical architecture reviews, ensuring high-quality technical designs.
• Guide, coordinate, and resolve technical issues that arise during the development process.

Job Requirements:

• Bachelor’s degree or above, majors in Computer Science, Software Engineering, or related fields.
• Over 6 years of experience in internet research and development, with experience in designing large-scale application systems. Experience in social product development is preferred.
• Proficient in microservices architecture and distributed architecture design, with experience in system development and optimization for high traffic, high availability, high fault tolerance, and high-load environments.
• Solid backend development skills, proficient in Java, with in-depth understanding and practical experience in data handling, performance optimization, concurrency, online system maintenance, and horizontal scaling.
• Familiar with Spring Cloud, Zookeeper, Redis, Kafka, Elasticsearch, and underlying architectures, including principles, cluster deployment, parameter optimization, and secondary development capabilities.
• Familiarity with recommendation technologies, algorithm engineering, and real-time estimation techniques is a plus.
• Strong communication, team collaboration, and project management skills, with the ability to work under pressure.
• A foundation in data analysis and a willingness to learn deeply, coupled with strong business acumen.
• Fluency in both English and Chinese for professional use.

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS.
• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Repsonse Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 3-5 years of relevant working experiences.
• A good team player.
• Excellent interpersonal skills.
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Sound problem solving and investigative skills.
• Desire to follow best practice and development standards as agreed within IT.
• Keen to learn new skills.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Job Description

• Carry out routine maintenance and repair work (Machine and Facilities)
• Perform plumbing, painting, and minor repairs
• Provide technical support and training to staff
• Implement preventive maintenance schedules
• Ensure compliance with health and safety regulations

Job Requirements

• Electrical/Mechanical engineering knowledge is an advantage
• Machinery repair and maintenance is an advantage
• Able to work as a team and individually
• Must be willing to be hands on
• Able to do overtime and work on Saturday and Sunday if required

Job Description:

• Understand and carry out all tasks given
• Collaborate with other engineers to integrate, test, and improve products and engineering processes.
• Perform regular inspections of equipment and scheduling maintenance or repairs.
• Inspect inventory and reporting inconsistencies
• Participate in various learning experiences, which may include attending workshops and training sessions.

Job Requirements:

• Diploma in the relevant engineering discipline
• Minimum 2 years of relevant engineering experience
• Strong analytical, troubleshooting, problem-solving, and communication skills.
• Ability to follow instructions and to collaborate with others.

Job Description

Reporting to the Project Manager/Engineering Manager, successful applicants will be involved in Power supply system and switching mode power supply development activities such as electrical circuit design, magnetic design, prototyping, evaluation and assisting manufacturing in BETA run of the new product.

Key Skills & Responsibilities

• Understand customer requirement to design or modify XP product to provide Added Value (AV) Solution based on XP design criteria and procedure
• Maintain an in-depth knowledge of all XP products to identify and select the most suitable product for Engineering Solution design.
• Design new products in timely manner to meet the product spec, modify existing designs, improve existing products for better performance and /or cost
• Proposed AV or modified solution based on sales/customer requirements.
• Perform product verification & validation test such as electrical performance, thermal, EMC and DVT to ensure product meet specification before delivered to customer.
• Electrical circuit and schematic design
• Embedded systems design both in hardware
• Firmware design knowledge will be an added advantage.
• Bill of materials (BOM) creation and documentation.
• Breadboard and prototype samples making and debugging
• Design new solution/product within XP standard design practice, safety guidelines, agreed timescales and costs.
• Performed product (AV and modified model) verification and validation, such as electrical performance, thermal, EMC and DVT evaluations,
• There will be some travelling required in conjunction with customer and manufacturing support as well as outside training

Qualifications

Knowledge/Qualifications/Attributes

• Minimum bachelor’s degree in electrical/electronic or higher degree in a related engineering field.
• More than 3 years electrical design experience of power supply/power system; those with more than 5 years’ experience will be considered for senior position.
• For Senior position, Identifies, and review projects main task, schedules, and technical challenges on project delivery timely is required.
• Good project management skill and capable of leading long-term structured problem-solving projects for senior position.
• Familiarity with PCB design using Altium/PADS will be an added advantage.
• Requires good communication, reasoning, problem solving and analytical skills.
• Hardworking, dynamic, strong responsibility and a good team play

Job Responsibilities

• Ensure the smooth operation of assigned systems, being available for on-call duties and overtime work for emergency handling or urgent needs.
• Perform routine system maintenance and upgrades.
• Efficiently handle user requests and provide excellent customer support to resolve IT-related issues.
• Take responsibility for or assist in project implementation.

Job Requirements

• Possess at least a bachelor's degree in information technology engineering, computer science, applied mathematics and others engineering related.
• Preferred qualifications include relevant certification(s) or work experience in the following areas:

1 year+ experience in VDI (Virtual Desktop Infrastructure) administration; Or,

1 year+ experience in Windows server/IIS/AD administration; Or,

1 year+ experience in OA (Office Automation) helpdesk-related roles.

1 year+ of cabling-related experience.

• Basic knowledge of Windows server administration is required.
• Basic knowledge of VDI administration is required.
• Experience in Windows file server, print server, DNS, and AD administration is preferred.
• Experience in VDI management is preferred.
• Demonstrates a positive and aggressive mindset, with the ability to thrive in a high-pressure work environment.

Job Responsibilities

• Ensure the smooth operation of assigned systems, being available for on-call duties and overtime work for emergency handling or urgent needs.
• Perform routine system maintenance and upgrades.
• Efficiently handle user requests and provide excellent customer support to resolve IT-related issues.
• Take responsibility for or assist in project implementation.

Job Requirements

• Possess at least a bachelor's degree in information technology engineering, computer science, applied mathematics and others engineering related.
• Preferred qualifications include relevant certification(s) or work experience in the following areas:

1. 1-year + Cisco network administration experiences; or
2. Cisco certification, like CCNP, CCIE, etc.; or
3. 1-year + IT working experiences in semiconductor factory.

• Possess basic knowledge of Windows/Unix operations.
• Experience in network management or certifications in related fields are preferred, especially Cisco-related experience.
• Demonstrates a positive and aggressive mindset, with the ability to thrive in a high-pressure work environment.

Who Are We?

HoYoverse is committed to providing immersive virtual world experiences to players around the world. We have brought fans popular games including Genshin Impact, Honkai: Star Rail, Honkai Impact 3rd, Tears of Themis, and Zenless Zone Zero, as well as a wide range of entertainment content.
‌
Community is at the heart of everything we do. We are devoted to engaging fans and fostering an enthusiastic and inclusive global community that provides access and encouragement for people to share their passion for ACG (Animation, Comics, and Games) through their own creativity and skills.
‌
Pushing the boundaries of imagination, we consistently explore cutting-edge game development technologies, and have accumulated leading technical capabilities in cel shading, cloud gaming, and other fields.
‌
In the future, we will continue to expand our content production, technology research, and publishing duties through operations in offices in Singapore, Montreal, Los Angeles, Tokyo, Seoul, and other areas.

When you apply to a position with HoYoverse, we will process your personal data. To learn more about how we process your data, we encourage you to review our comprehensive Global Applicant and Candidate Privacy Policy. This policy provides detailed insights into how your information is collected, used, and protected throughout the application process.

What You Will Do:

• Collaborate with top-tier game R&D teams to implement comprehensive risk management strategies, ensuring quality assurance from the design phase through to the game launch.
• Experience the gameplay design, leveraging your extensive gaming experience to provide constructive feedback aimed at elevating the user experience.
• Utilize a range of tools and methodologies to conduct thorough and meticulous game testing. Follow up on issue resolutions to ensure a seamless game launch.
• Uphold and maintain stringent standards at all times, continually striving to enhance R&D processes. This effort aims to improve team efficiency and the quality of outputs, thereby contributing to the development of first-rate products.

What We Are Looking For:

• Passion for games and extensive gaming experience, with high standards for game quality. Hardcore gamers are preferred.
• Exceptional logical thinking skills with a strong aptitude for learning; be patient, detail-oriented, accountable, and adept at identifying and resolving issues.
• Strong communication skills, coupled with the ability to drive progress and collaborate effectively within a team; ability to perform well under pressure.

Bonus Points:

• Foundational knowledge in computer science and programming skills.

We are an equal opportunity employer that believes diverse backgrounds are key to bringing our concepts to life. If you're looking to play a key role in creating the best immersive virtual world experience for our users, we invite you to join our team.

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Job Description

· Contribute to high-quality research and development work in TCOMS laboratory through physical experiments including:

o design of scaled physical test models, such as maritime vessels, offshore rigs, marine renewable platforms, and aquaculture systems for testing in TCOMS Ocean Basin.

o generation of detailed design, production, assembly, and as-built drawings of test models.

o Structural assessment of the test models as well as other support to be used in the experimental setup.

o Work with a team of engineers and technicians on model fabrication and modification, calibration, instrumentation, and experimental setup.

o enhance the measurement of models’ behaviour and response by use of appropriate sensors like load cells or custom strain gauges.

o document design processes, methodologies, and results.

o contribute to process enhancements for improved efficiency of research work.

· Perform research in the following areas:

o Offshore hydrodynamics

o Coastal Protection

o Structural response and health monitoring of Marine & Offshore platforms and floating structures

o Fluid-structure interactions

· Collaborate with internal teams, affiliated research institutes and other relevant stakeholders in proposal preparation and submission.

· Any other duties as assigned by supervisor.

Job Requirements

· Bachelor’s/ Master’s Degree in Civil Engineering, Mechanical Engineering, Marine Engineering, Offshore Engineering, or other related disciplines.

· Preferably 3 years of relevant research/industry experience with competent knowledge in some of the following areas:

- Offshore engineering, marine engineering, marine structures, hydrodynamics, naval architecture.

· Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

- CAD software such as SolidWorks, Rhino, AutoCAD

- Engineering tools such as SESAM and ABAQUS

- Programming codes such as Python, MATLAB, or equivalent.

· Model experiments in wave flumes, wave tank or ocean basin.

· Good interpersonal and communications skills.

· Ability to adapt and work effectively as members of a team.

· Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

· Git Repository and Toolchain Management: Administer multiple Git repositories across different locations and develop automation toolchains using Python and scripting languages.

· Manage and Configure Firmware SDK: Oversee configuration management for firmware SDKs, ensuring modular design, code consistency, and automated testing prior to releases.

· Lead Automation and CI Integration: Implement and manage automation pipelines, particularly with Jenkins, and integrate CI solutions throughout the SDLC to enhance efficiency and automation.

Requirements:

· Bachelor’s degree or higher in Computer Engineering, Computer Science, Automation, or a related field.

· Proven experience in firmware SDK configuration management with a focus on best coding practices, such as clean and modular design, and automated testing prior to software/firmware releases.

· Strong expertise in managing Git repositories, including ensuring code consistency across two or more repositories hosted at different locations.

· Strong proficiency in:

o C: For firmware configuration management.

o Python: For managing Git repositories and creating toolchains.

o Scripting: Proficiency in batch, shell, or similar scripting languages.

· Comprehensive understanding of the SDLC and the ability to integrate CI solutions into each phase to achieve high levels of automation.

· Experience with cybersecurity and intellectual property protection, will be a significant advantage.

· Extensive hands-on experience with automation pipelines, particularly Jenkins.

Functional Competencies:

1. Perform review of marine construction, equipment of drawings / document according to applicable rules, regulations and delegations.
2. Communicate and work closely with internal and external stakeholders and ensure contract requirements are met.
3. Support and provide technical advice to clients.
4. Participate in meetings (both internal and external) as required.
5. Support Equipment & Material Certification team and Consultancy Services team in drawing review, inspection or consultancy work, as and when required.
6. Attend all scheduled trainings (locally and overseas) and ultimately achieving specified delegations as agreed in Performance Management Process.
7. Ensure timely and accurate submission of time & expense sheets.
8. Keep up to date with new rules, regulations and technical information or process disseminated through internal communication.

Requirements:

1. Degree qualified in Naval Architecture, Marine Engineering or equivalent with minimum 3 years relevant working experience on Marine and Offshore related field.
2. Minimum delegation level 1 within area of specialization: Hull, Machinery, Electrical / Automation, Safety, Stability / TLO.

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering center serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

Thales DIS Digital Payment business line is seeking a mobile developer for our successful Mobile payment product.

Thales DIS -Digital Payment offers a simplified digital experience solution for proximity payment and e-commerce, allowing banks and businesses to offer a multi-channel and multi-device payment experience. This sophisticated solution that involves multiple web services and clients, offers a single platform that provides ready-to-eat, easy-to-integrate services while ensuring best-in-class security.

Responsibilities:

• Participate in design, implementation, and validation of mobile SDK and application within the R&D project team structure in accordance with institutionalized processes and delivery standards
• Participate in the design and development of mobile SDKs
• Contribute to the improvement of existing technology platform/baseline and development methodology through prototyping and patent proposal
• Troubleshoot and SL3 support for our customers

Requirements:

• Degree in Information Security / Electrical/Electronics/Computer Engineering, or related fields.
• Strong knowledge of mobile development in Android, especially on relevant core platform technologies.
• Proficient in Java, Kotlin
• Around 8 years experience working with mobile technologies
• Proficient in native development is a plus
• Strong interest in mobile applications ecosystem
• Knowledge of OO design and programming skills
• Knowledge of unit testing and test automation
• Experience with continuous integration and build automation Jenkins and Gradle
• Motivated self-starter, strong logical, creative problem-solving skills and excellent analytical skills

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to analysis of production lines to identify improvement, fostering cross-departmental collaboration for project implementation, and utilizing data analysis for management reporting. It involves optimizing automated production systems for efficiency, supervising personnel and machinery, and ensuring production targets are met.

Key Responsibilities

• Conduct in-depth analysis of production lines and promote cross-departmental cooperation to propose and implement improvement projects.
• Utilize data analysis for effective management reporting.
• Optimize and maintain automated production systems to enhance efficiency.
• Supervise personnel and machinery while driving the achievement of production targets.

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Computer Science, Industrial Engineering or engineering related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Any other task assign by Superior

Job Responsibilities:

1. Circuit and system design of RF/analog transceiver IC based on CMOS technology

2. Schematic design, behavioral and circuit-level simulation, circuit implementation, layout design and test

Job Requirements:

1. A master's degree or above in microelectronics, communications, electronic engineering and other related majors; more than 3 years of relevant experience

2. Good know-how on RF/analog circuit theory and analysis; Good understanding of design process of RF/analog IC

3. Solid experience in the following module/block design and test: VCO, PLL, LNA, PA, MIXER, PMU, ADC, DAC, etc.

4. Good communication skills and team spirit.

5. Fresh MS graduates are welcome.

Position Summary:

The Network Engineer supports and maintains infrastructure operations, monitors infrastructure performance and resolution of technical problems. Manage firewalls, network access control and F5 Load balancers.

Manage the firewalls (fortigate), network access control (CPPM) and F5 load balancers

Role and Responsibilities

Roles & Responsibilities:

Maintain infrastructure

• Perform activities related to ongoing maintenance of infrastructure

• Assist with the implementation of agreed infrastructure changes and maintenance routines

Optimise infrastructure performance

• Perform ongoing tuning and optimization of infrastructure hardware and software components such as updates and upgrades

• Participate in infrastructure development activities

• Assist with infrastructure testing and implementation

• Gather performance and data usage statistics for capacity planning and reporting

• Assist with piloting of new tools, technologies, and/or processes

Resolve incidents

• Perform problem/issue identification and resolution

• Assist with simulation of user problems to resolve operating difficulties

• Follow up with users to ensure problem has been resolved

• Recommend system modifications to reduce user problems

Requirements / Qualifications

- Degree in Computer Engineering or equivalent

- Minimum 3 years of Experience in Network Support

- CCNA / CCNP certification preferred

- Knowledgeable in Firewall, NAC and F5 Load Balancers

OTSAW Digital is seeking creative, energetic well-rounded Product Development Engineer to work in the field of autonomous robot technology.

You will be responsible for integrating and testing software solutions in simulation and on the robot. We are looking for engineers who are interested in tackling challenging problems for our robots.

At OTSAW Digital, we want people with passion. We want innovators. We want people who can collaborate and bring us a creative future.

So, if you are passionate about working in a startup, want to solve hard problems and make cool robots with us, please apply.

Responsibilities:

• Participate in new product development from concept to launch.
• Manage and co-ordinate with various departments, to develop product fulfilling to product design specification, keeping schedule, cost and quality.
• Identify and resolve all issues effectively to achieve all objectives.
• Acquire product design specification approval from stakeholders before product development.
• Translating customer’s needs and pain points into product design specifications.
• Establish and carry out test procedures for products to meet to product design specification.
• Establish assembly drawing to the manufacturing team for production purposes.
• Ensure proper documentation (including manuals) of all required information for product.
• Support product installations and any necessary diagnoses, troubleshooting, service, and repair.
• Provide product training and support internally.

Requirements:

• 2-3 years working experience in relevant fields.
• Min. education qualification: Bachelor Degree in Robotics System, Computer Engineering, Electrical Engineering.
• Strong foundation in Electrical, Mechanical and Software System.
• Demonstrate deep interest & understanding in robotics field.
• Experience in developing on actual physical robot is a plus.
• Experience in any of the following C++, Python, ROS, JS, Git, Autodesk Eagle, Autodesk Inventor is a plus.

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Responsibilities

· Functional blocks and/or subsystems of digital ASICs from design to silicon verification. This includes RTL coding, verification, silicon validation, and qualification.

· Proactively work with other team members and partners to align on specifications, conduct reviews, and complete documentation.

· Contribute to ASIC roadmaps and future innovation.

· Develop technical leadership skills.

· Participate in co-development activities to help prototype ASIC designs in FPGA or other software models to support pre-silicon firmware development and verification.

Education And Experience Required

· BS or MS degree in electrical engineering or equivalent with focus on VLSI design experience

· Fresh MS graduates are welcome.

Knowledge And Skills

· Knowledge of submicron semiconductor technology

· Familiar with digital ASIC/SOC design flow from RTL to silicon characterization

· Familiar with Synopsys and Cadence EDA tools for Simulation, Synthesis, Timing (STA), Formal and Assertion based verification, etc.

· Familiar with design and programming languages: Verilog, System Verilog, Python, Perl, C, C++, etc.

· Ability to apply analytical and problem-solving skills

· Strong written and verbal communication skills, ability to negotiate design features and options

· Knowledge of embedded system design, verification, and product development lifecycle

· Deep knowledge and domain know-hows in ARM/RISC-V microprocessor subsystem

Job Description:

• Research, design, and develop computer and network software or specialised utility programs.
• Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.
• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.
• Work with computer hardware engineers to integrate hardware and software systems and develop specifications and performance requirements.
• Collaborate with the team to create technical designs for frontend architectures using React and React Native.
• Develop and maintain frontend components and features for our main products.
• Participate in the development of management platforms related to marketing activities.
• Optimize frontend performance and implement server-side rendering techniques.
• Contribute to the improvement of development processes and coding standards.
• Stay up to date with the latest frontend technologies and best practices.\

Requirements:

• Bachelor's in Computer Science, Engineering or a related field
• Minimum 5 years of experience in Frontend Engineering.
• Experience in React or React Native.
• Experience with frontend performance optimization and server-side rendering.
• Familiarity with build tools like Webpack and Vite.
• Knowledge of Node.js and CSS.
• Excellent problem-solving and debugging skills.
• Strong attention to detail and ability to deliver high-quality code.
• Good communication and collaboration skills.
• Passion for staying up to date with the latest frontend technologies and trends.

Job Summary:

The Applications Support Engineer provides technical support and maintenance for software applications, ensuring their optimal performance and availability. This role involves troubleshooting issues, implementing solutions, and collaborating with other IT teams to enhance system functionality. The Applications Support Engineer is also responsible for documenting processes, managing application configurations, and assisting in the deployment of software updates and patches.

Key Responsibilities:

• Application Support: diagnose and troubleshoot application issues reported by end-users or detected through monitoring tools. Provide timely and effective resolution to application problems, escalating issues when necessary.
  
• Incident and Problem Management: manage and resolve application-related incidents and problems, ensuring root causes are identified and addressed. Maintain an incident log and provide regular updates to stakeholders on the status of issues.
  
• Application Maintenance and Updates: work with development teams to deploy new versions and patches of applications and implement changes. Test and validate updates before deployment to ensure minimal disruption to users.
  
• User Support and Training: assist end-users with application-related queries and provide technical support. Conduct training sessions for users on new features or changes to applications. Develop user guides and support documentation to assist end-users.
  
• Configuration Management: manage application configurations, including settings, permissions, and access controls. Ensure that application configurations are documented and maintained in line with organizational standards.
  
• Collaboration and Communication: work closely with developers, system administrators, and other IT teams to resolve application issues. Communicate effectively with stakeholders, providing regular updates on application status and issues. Participate in project meetings to provide input on application support requirements.
  
• Continuous Improvement: identify areas for improvement in application performance and user experience. Propose and implement solutions to enhance application efficiency and reliability.
  

Requirements:

• Degree in Computer Science, Information Technology, or related field.
• Preferably 2 to 5 years of experience in application support, software troubleshooting, or a related role.
• Beneficial to have experience in an Aircraft Engine Maintenance Repair and Overhaul shop.
• Good knowledge of MS Excel, databases, SQL, and scripting languages (e.g., Python, PowerShell).
• Strong problem-solving and analytical skills.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Strong customer service orientation.
• Training provided for candidate without prior experience.