· Preparation of tender documents & quotation and submission to client.

· Continually seek new opportunities and too increase customer satisfaction and well relationship with client.

· Develop and maintain viable long-term relationships with Clients & Sub-contractor.

· Manage construction activities including planning, coordination, execution and monitoring of installation and construction works on site.

· Maintain good quality standards, carry out site inspections and resolve technical issues on time.

· Provide project estimation cost, analysis reporting for ongoing cost, manage allocation of costs.

· Execute projects with minimal supervision within budget & schedule

· Drive the work force with friendly relationship.

· Responsible for material procurement, subject to the client approved specification and on time requirement to site.

· Conduct project progress reports, client updates and drive internal and clients’ progress meetings.

· Prepare risk assessment and method of statements.

· Solar projects experience is added value.

Duties to Perform:

The senior Gas Engineer will work on designing, tendering, and monitoring the installation of bulk gas and special gas systems for industrial properties in semiconductors, electronics, biopharma, and related industries. The gas systems include bulk gases, high-purity inert gases, flammable gases, corrosive gases, hazardous gases, and related distribution networks.

The senior Gas Engineer will collate the client’s capacity requirements and specifications and prepare the conceptual design, make a detailed design for system capacity, configuration, schematic, P&ID, PFD, layout, distribution, and system parameters, and prepare documents like the scope of work, reports, specifications, standards, logistics, and detailed drawings for tender. He or she will review proposals from contractors and continue to support them during installation when required.

The successful candidate will work closely with other disciplines such as architects, civil, cleanroom, electrical, automation, mechanical, and construction engineers, as well as CAD/ BIM designer in designing and delivering the project.

Requirements:

You should have a bachelor's degree in chemical engineering or equivalent.

You should have sound experience in designing high-purity, and specialty gases and systems related to semiconductors manufacturing or similar facilities. You should be able to comprehend clients’ URS, and design with concept design, schematics, PFDs, P&IDs, routing layout, the scope of work, specifications, and functional descriptions. The experience in designing chemical systems will be definite added advantage.

Your familiarity with the Semi standards and Singapore standards, manufacturing tools, materials, and CAD/ BIM will be an added advantage.

You should be able to make presentations to clients and engineers on design, tendering, project execution, supervising progress, and quality of work.

Able to work independently.

Able to travel / relocate.

• Hand on install automation machines & systems with meeting planned project & production schedule.
• Maintain and suggest improvement for existing automated production lines.
• Create, prepare, update automation project documentation, procedures & drawings of Gantt chart, weekly progress report, process / equipment flow chart, validation list, buy off/FAT/SAT (Factory / Site Acceptance Test) procedure, mechanical assembly & layout drawing, electrical diagram & wiring, I/O list, co-robot & PLC program, SOP (Standard Operation Procedure), WI (Work Instruction) & PM (preventive maintenance) check list.
• Update & back up automation system documentation, procedures, drawings, software, co-robot & PLC programming timely.
• Coordinate with internal team (Sales, Quality, Project, Production, maintenance) and external supplier to make projects successful.
• Participate of root cause analysis of product failure within cross functional team.
• Prepare machines preventive maintenance check list and train operation & maintenance staffs.
• Monitor automation system performance and provide support & perform service production automation line when necessary.
• Any other duties as and when assigned.
• Adhere to workplace health and safety. Abide by all EHS policies and procedures

Requirements

• Diploma of Engineering in Automation / Mechanical /Mechatronics / or equivalent. Fresh graduates are welcome, on job training will be provided.
• ITE with serval years’ experience are welcome.
• Experience in automation machine design are advantages.
• Hands-on experience of electrical and mechanical assembly & installation
• Knowledge on Mechanical/Mechatronics/Electrical components.
• IT skills (MS Office)
• Communicate well in English

Jason Marine Group Limited is a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Technician/ Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing of navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Etch diverse team of talent. You will be responsible to manage the integration of all modules' processes and the respective derivatives.

What you will be working on:

• Responsible for new Process Development and/or Process Transfer
• Process optimization for Yield and Productivity improvement
• Troubleshoot and resolve Process related issues
• Sustain and/or improve Process Capability, CpK
• Qualify and release tools for required MFG capacity
• Qualify alternate sources for Cost improvement
• Plan and execute Engineering Projects
• Continuous improvement through participation in 10k idea, LSS & BKM to create cost effective and robust processes with quality
• Setup, monitor and maintain SPC charts
• Adhere and complete necessary documentation

More about you:

• Bachelor Degree in Engineering / Science or equivalent
• 1-3 years relevant experience in Semiconductor manufacturing environment
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Assist with infrastructure planning and design

• Assist with the planning and design of infrastructure systems
• Assist with the documentation of infrastructure design and planning activities and decisions

Support infrastructure operations

• Perform infrastructure operations activities such as installations of infrastructure systems according to design specifications
• Align infrastructure operations with agreed service agreement standards

Maintain infrastructure

• Perform activities related to ongoing maintenance of infrastructure
• Assist with the implementation of agreed infrastructure changes and maintenance routines

Optimise infrastructure performance

• Perform ongoing tuning and optimisation of infrastructure hardware and software components such as updates and upgrades
• Participate in infrastructure development activities
• Assist with infrastructure testing and implementation
• Gather performance and data usage statistics for capacity planning and reporting
• Assist with piloting of new tools, technologies, and/or processes

Resolve incidents

• Perform problem/issue identification and resolution
• Assist with simulation of user problems to resolve operating difficulties
• Follow up with users to ensure problem has been resolved
• Recommend system modifications to reduce user problems

Requirements

• At least 6-8 years' of experience in the Network Management and Support Services, Unified Communication, Wirecenter maintenance
• Strong knowledge and experience in supporting Cisco Switch, Cisco Router, Fortigate Firewall, Palo Alto Firewall, ClearPass NAC, F5 VPN, IPS, WLC, Access Point and VSS/VLAN Architectures.
• Network Support in the areas of wireless, wired, VPN
• Network certifications eg CCNE, CCNA

Job description:

--Review renovation and construction structural drawings to plan tasks.
--Calculate material quantities.
--Perform coordination duties and basic clerical work.

Requirements:
--Relevant experience is required.

Company Benefits:

--Annual and medical leave according to Ministry of Manpower (MOM) guidelines.

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Any other task assign by Superior

About your role

• Serve as the technical expert and trusted advisor to manufacturing customers around automation solutions.
• By applying subject matter expertise, you build and maintain client relationships and solve their complex automation challenges.
• Collaborate with sales and technical team members to help identify, progress, and close commercial opportunities.
• Develop sales processes and build relationships with stakeholders to design and offer solution that solve customer pain points.
• Attractive commissions will be awarded.

Requirements

• Experience in robotic engineering and simulation work is preferred.
• Strong understanding of robotics and automation related products.
• High willingness to learn and take ownership.
• Ability to effectively communicate product value propositions, negotiate commercial contracts, and close deals.
• Comfortable with travelling internationally for work.
• Ability to take initiative and self-manage to achieve key objectives and company KPIs.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Civil and Environmental Engineering at the National University of Singapore is recruiting a Research Engineer. The successful candidate will work on experiments and numerical modelling of 3D breaking waves and wave-current interaction. The candidate should have strong knowledge background in terms of waves, currents, turbulence, etc. Experience with experiments and CFD model will be advantageous. Only shortlisted applicants will be notified.

Job Requirements

• Possess at least a Masters degree in Civil Engineering with related research experience.
• Candidates with background in fluid mechanics, coastal and ocean engineering, experimental methods are encouraged to apply.
• Strong written and spoken communications.
• Good in quantitative analysis.
• Strong written and spoken communications.
• Good knowledge of CFD analysis and programming skill is an advantage.
• Open to fixed-term contract.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Key Responsibilities

• Take charge of facility MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Mechanical Engineering or related field.
• 300mm fab facility mechanical system operating experience, especially Exhaust / Chiller / PCW & Clean Room Systems.
• Good written and verbal communication skills in English.
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Summary:

Co-ordinate with respective factory teams including CLS Tech Support, CLS Production, HPE Procurement, Material team, HPE Product Engineering team, Test team etc. to ensure all area of focus are well prepared and ready for factory inspection.

Detailed Description:

Performs tasks such as, but not limited to, the following:

• Prepare product sample for agency inspection.
• Perform internal product compliance audits.
• Verify relevant documentation revision and content.
• Prepare and host Factory tour (Incoming Inspection/Production Lines/Finished Products/Lab/Testing areas) with auditor/HPE representative.
• Coordinate product safety factory inspection with relevant engineers (Test/PE/Procurement) and Production to ensure compliance to applicable HPE standards and product regulatory requirements.
• Pursue Supplier CoC availability by purchased batches as “verification of purchased parts” for critical component materials from relevant Proc Engr (e.g. power supply/ PCB/ plastic materials/ batteries/labels) that is requested by the agency auditor.
• Traceability of manufacturer and flame rating for incoming material e.g. plastic material/PCB used in products.
• Keep in touch with relevant Global Product Regulatory team to track and understand the updates to requirements.
• Report any regulatory changes/escalation to management and inform applicable departments.
• Track and maintain the latest version certificates and test reports from the certification body.
• Ensures that the processes are carried out and comply with the specifications required by customers and that it complies with the local requirements of the organization and the requirements of MPS (Manufacturing Process Standards)
• Ensures that the specifications, the acceptance criteria of the products by the operational staff are known and respected; ensures that operators comply with product quality inspection procedures in accordance with customer requirements
• Provides support in order to optimize processes, identifies and initiates opportunities to reduce costs
• Prepares and collects data from the key points of the processes and prepares the internal quality reports
• Monitors product yields, process (yield) and scrap rate (scrap) or other quality indicators
• Participates in the activities of PFMEA, 8D analysis and elaboration of Control Plan
• Assesses and updates working instructions for specific products

Requirements:

• Bachelor's Degree in relevant fields
• 4 to 6 years relevant experience
• Strong knowledge in manufacturing operations Understand quality tools such as FMEA, PMP, SPC, 8D methodology, etc
• Good understanding and familiarity with safety regulations such as UL, CSA, TUV, CCC and standards (60950-1, 62368-1), China standard GB 4943.1, GB 9254.1, GB 17625.1
• Good understanding in ISO 9001:2015 Quality Management System (Certified ISO Internal Auditor Preferred)
• Attention to Detail: Strong attention to detail is crucial for identifying potential safety issues.
• Team Collaboration: Ability to work effectively with cross-functional teams, including design, manufacturing, and quality assurance.
• Technical Knowledge: Understanding of product design, materials, and manufacturing processes, as well as quality and process improvements techniques and tools.
• Problem-Solving Skills: Strong analytical skills to identify potential safety issues and develop solutions.
• Communication: Excellent verbal and written communication skills for reporting and training, effectively communicate with a wide variety of internal and external customers teamwork skills;

OTHER INFO:-

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• Working Days / Hours: 8am to 5.30pm / 8.30am to 6pm (Mondays to Fridays)

-----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Job Description & Requirements:

• Review of Civil & Structural working drawings and shop drawings in connection with SEM and steel structure shop drawings during pre-construction phase to prepare construction methods, identifying risks to promote strategies and alternative methodologies to mitigate.
• Organizing regular meetings with the sub-contractor's technical teams to resolve technical problems in pre-construction and construction phase.
• Working closely with Design team and LTA/QPS (client) to resolve execution issues with appropriate functional proposals with an aid of presentation or sketches.
• Preparing method statement for construction working including RA and SWP.
• Prepare of RFI for site inspection for construction, MPI test, welding works and post concrete works and also involving in site inspection with QP.
• Reviewing of rebar BBS prepared by sub-con in compliance with standards and shop drawings roof slabs, steel structures and corbel details for precast installation.
• Site Supervision of construction of structures such as pile cap, undergrounds tanks, base slab, column (~12m high) including corbel, RC beams, Capping beam, RC and PC beam connections, ramps, steel and RC struts, hanging sumps and staircases.
• Reviewing and site supervision of surface water drain and waterproofing shop drawings and site work.
• Assisting construction manager for planning and preparing daily progress reports
• Tracking and optimizing manpower for each works
• Preparation of conceptual drawings for steel decking or other temporary structures required on site and reviewing shop drawing submitted by sub-con and supervising site installation.
• Reviewing concept drawings and supervising installation of bracing connections between permanent plunge-in-columns for top down column construction.
• Reviewing sub-con's shop drawing for steel strut and supervision of installation work.

Vita Coco, the pioneer in coconut water and the #1 selling coconut water in the US, is a passionate, fun-loving brand in one of beverage’s fastest growing and most profitable segments. Beyond its impressive hydration and functional benefits, Vita Coco has built a real following in popular culture with celebrities, professional athletes, top-selling musicians, and many more. This is where you say SIGN ME UP. But we say, slow down cowboy, read the rest.

In a Nutshell, we’re looking for…

An Operations Engineer with liquid processing experience in the F&B sector, who will be responsible for providing operations support to strategic co-manufacturing partners and who will collaborate closely to implement innovative and continuous improvement initiatives. This role, based out of Singapore, will entail about 50% travel, primarily within the APAC region.

ESSENTIAL FUNCTIONS

Project Management

• Lead projects involving new plant installations and continuous improvement.
• Manage overall project timelines and coordinate with the different stakeholders to ensure on-time delivery of projects
• Work closely with co-manufacturing partners to provide technical support during entire project phase

Operations Support

• Provide Technical Support to ensure Quality, Productivity & Costs are optimized
• Assist in plant trouble shooting and in the resolution of manufacturing related issues
• Work closely with co-manufacturing partners and Corporate HQ in executing new package launches and commercialisation of new products
• Conduct audits of all co-manufacturing facilities to evaluate the manufacturing process and coordinate required follow-up actions
• Work closely with co-manufacturing partners and QA Team to investigate and resolve product quality issues
• Identification of cost savings and optimization opportunities in our co-manufacturing partners, define action plans to execute the actions needed so these are captured.

Innovation and Improvement

• Lead and execute trials with co-manufacturing partners in new process development
• Work together with co-manufacturing partners on product improvements and new product formulations
• Perform technical feasibility and manufacturing audits for potential new manufacturing partners and material suppliers

DESIRED SKILLS AND EXPERIENCE

• 4 years’ experience in the food manufacturing industry, preferably in beverages
• Familiar with factory manufacturing processes and constraints related to low acid food & aseptic beverage production
• Sound technical knowledge and liquid processing equipment, mechanical P&ID design and strong understanding on manufacturing procedures and sequence requirement.
• Exposed to food quality requirements such as HACCP, GMP and ISO Systems
• Excellent oral and written communication skills, interpersonal skills to work effectively in a multi-disciplinary team.
• Willingness to travel around the region (50%).

Vita Coco® is the brand that started America’s craze for fresh coconut water. Informed consumers, pro-athletes and nutritionists as well as in-the-know celebrities and influencers have all become loyal fans of coconut water, swearing by the Vita Coco brand for its delicious flavor, hydrating properties and replenishment benefits. Award-winning Vita Coco, which counts Madonna, Demi Moore and Matthew McConaughey amongst its investors, is one of the most sought-after products in the beverage aisle.

In the U.S. Vita Coco is sold at over 75,000 retailers including Whole Foods Market, Safeway, Target, GNC, Kroger, Publix, Ralph’s, Stop & Shop/Giant, Costco, select Wal-Mart stores and many chain and independent groceries and retailers. It is also sold in dozens of U.S. airports and university campuses, as well as online at Amazon.com.

Vita Coco was founded in 2004 and is based in New York City, with operations in Europe and Asia. Visit vitacoco.com for more details.

Roles & responsibilities:

1. Coordination with Construction team/ Design Consultant/PE/Construction Subcontractor, etc. for Detail Design Development.

2. Review Structural Analysis and Calculation carried out by design consultant and develop simple structural calculation for temp. works

3. Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, Shop drawing development.

4. Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, and Strutting etc.

5. Check/Rectification of all the structural drawing/shop drawing if required.

Requirements and relevant experience are as below:

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline.

2. Minimum 3 years of experience in Civil and Structural Engineering especially for LTA Project

3. Be well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure

4. Be well-aware of Underground Structure/Construction Sequences and related civil design works.

5. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards

* Candidates who has experience as CS Engineer (Design) in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.

Job Description:
1. Design and engineering of Electrical Services.
2. Liaise and coordinate with architect, others consultants, owners and contractors in
development and implementation of the project until completion.
3. Provide project design and development.

4. Prepare drawings plan for submission to Authorities.
5. Prepare tender document and tender drawings for tender.
6. Attend to site progress meeting and site technical issues.
7. Work with others engineers and designer to complete assigned work within deadlines.
8. Liaise with authorities for plan approval and site inspection.
9. Conduct testing and commissioning of Electrical System.
10. Handover of the system during completion.

Job Requirement:
• Relevant degree recognized by PEB, Singapore in Electrical Engineering
• Extensive Electrical experience in designing M&E Building services, ideally with experience in healthcare project.
• Knowledge of relevant design standards and local authority regulations.
• Knolwedge of Autocad

· Responsible for developing, implementing, and maintaining Quality Plan for FA and production parts.

· Responsible for maintaining company measuring instruments.

· Interpret and analyse customer specifications with great details

· Identify, document, and report defects or anomalies, working closely with cross-functional teams to address and resolve issues promptly.

· Facilitate meetings for production and quality personnels

· Support in internal and external audits.

· Maintaining Company’s Quality Management System (QMS)

· Any other duties as assigned by Supervisor.

Job Requirements:

· Technical certificates in any Engineering field

· Effective communication skills, both written and verbal, to liaise with customers and suppliers

· Ability to work with production and office staffs

· Ability to write root cause analysis

· Flexibility and adaptability to take on new challenges and responsibilities.

· Ability to read and interpret mechanical drawings

ABOUT AMS

The Airspace Mobility Solutions (AMS) business, part of the Global Business Unit Land and Air Systems, is providing leading edge Air Traffic Management (ATM), Unmanned Traffic Management (UTM), Security and Digital Aviation solutions for the Commercial and Defence sectors.

The AMS business manages 11% of the world’s airspace and with revenues of over 500 million Euros worldwide, is the global market leader in airspace management solutions. In Singapore, the business focus is the delivery and support of two key ATM solutions including TopSKY-ATC(HE) and LORADS-III.

This role will initially support the LORADS-III program.

ROLE DESCRIPTION SUMMARY

The Senior Network Engineer is responsible for the design and implementation of network solutions for the respective ATM project and/or bid activity.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Network Engineer, you are accountable for:

• Develop or update solution architecture drawings and diagrams, cost templates (devis), the List of Supply (LOS) / Bill of Materials (BOM), and interfaces at the start of the project.

• Develop or update network contributions to the Solution Specification and Design documentation, Network Acceptance Test Procedures, and other associated network integration documents.

• Define equipment configuration for the ATM solution(s) and coordinate with Hardware Deployment and Integration management for assembly of the ATM system and interface with Tools Engineering, Customer Service and Site Services departments where necessary to accomplish this task.

• Load, configure, validate, and hand over equipment to Software Integration in the factory and on customer sites

• Support configuration changes to system platforms in factory and customer sites.

• Proactively support Project Design Reviews

• Provide customer training

• Identify risks at solution architecture level and propose where possible alternate validated solutions

• Provide system and networking expertise

• Follow and contribute to the development and enhancement of engineering processes

In a leadership capacity, provide support to Work Package Manager:

• Develop and maintain objectives, strategy and roadmap

• Ensure that deliveries (including associated documentation and engineering artefacts) are on time (as per schedule and milestones) with the expected level of compliance

• Contribute to key milestones and provide input into triage and change boards

• Track team progression against the agreed plan, provide task estimation and forecasting as input into the weekly status dashboard

• Identify risks and propose mitigation solutions

• Relay key communications to team through daily/weekly team meetings

Responsibilities to the team:

• Is main point of contact for the team on functional or technical topics, or knows who to contact

• Performs allocation and prioritisation of tasks for the team

• Responsible for the quality of the teams outputs, including compliance to the configuration management process

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

• Degree in Engineering, IT or related discipline

• Cisco formal certifications (CCNP, CCNA etc)

Essential Experience

• 5+ years experience in similar positions on projects delivering complex software-centric real-time systems.

• Proven experience in leading small teams

• Demonstrated experience in the design of infrastructure and network architectures

• Demonstrated experience in the design of network architectures inline with security standards and policies

• Sound level of knowledge and experience with Unix/Linux (Redhat distribution preferred) Operating System

• Familiarity with a wide range of Computer and Networking hardware (preferably Cisco)

• Scripting (TCL/TK, Perl, & Shell)

• Able to work on multiple activities con-currently and effectively self-manage (autonomy)

• Experience with collective decisions and conflict resolutions

• Capability to manage various stakeholders having different objectives

• Proven capability to work in a multi-cultural environment and with variety of international customers.

• Aptitude to work effectively in a multi-disciplinary integrated team environment

• A positive attitude combined with excellent interpersonal and motivational skills.

• Sound judgement and independent decision-making capability where necessary

• Excellent written and oral communication skills in English

Desirable:

• Work experience in a mission-critical, near real-time environment preferably ATC-related

• Experience in large and distributed networked computer system

• Experience in working in a Scaled Agile Framework (SAFe)

• French Literacy

GENERAL / SPECIAL REQUIREMENTS

• Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

• An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

• An advocate for a culture of continuous improvement

• An advocate for Accountability, transparency and curiosity

• Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

• Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

• Be eligible for Security Clearance from the Singapore Ministry of Home Affairs (CAT2)

• Occasional international travel may be required

ABOUT THALES

Thales established its presence in Singapore in 1973 to support the expansion of aerospace-related activities in the Asia-Pacific region. Throughout the last four decades, the company grew from strength to strength and is today involved in the primary businesses of Aerospace (including Air Traffic Management), Defense & Security and Digital Identity & Security. Thales today employs over 2,100 people in Singapore across all its business areas.

ROLE DESCRIPTION SUMMARY

The Network and Infrastructure Integration Engineer is responsible for the provision of the infrastructure platform: network equipment (switches, routers, firewalls) and compute equipment (servers and workstations), including the deployment of the SOE (Standard Operating Environment) for the respective project and/or bid activity. The Engineer is a key member of the Hardware and Infrastructure discipline team that provides:

· Technical and resource supervisory input to network integration and infrastructure deployment engineering activities,

· skilled input to the network integration and deployment activities within the respective project engineering segment, and

· assistance to the Integration Group for bid response activities.

KEY ACTIVITIES AND RESPONSIBILITIES

The Network and Infrastructure Integration Engineer provides effort and expertise in two areas: Projects and Bids.

For Projects:

· Revising solution architecture drawings and diagrams, cost templates (devis), the List of Supplies (LoS) / Bill of Materials (BoM), and interfaces at the start of the project.

· Create and/or update network integration engineer contributions to the Solution Specification and Design documentation, Network Acceptance Test Procedures, and other associated network integration documents.

· Reviewing definition documents, solution specifications, design documentation, acceptance test procedures and other associated documentation to align with project objectives, and participating in the product integration and verification phases

· Defining equipment configuration for the ATM solution(s) and coordinating with Hardware Deployment and Integration management for the assembly of the ATM system. Also interface with Tools Engineering, Customer Service and Site Services departments where necessary to accomplish this task.

· Load, configure, validate, and hand over equipment to Software Integration in the factory and on customer sites.

· Support configuration changes to system platforms in factory and customer sites.

· Attend Design Reviews with customers.

· Provide customer training.

· Identify risks at solution architecture level and propose where possible alternate validated solutions.

· Provide system and networking expertise useful in the design.

· Follow and contribute to the development and enhancement of engineering processes.

For Bids / Tenders:

· Definition of system hardware architecture and interfaces.

· Develop and peer review of the system Architecture Diagrams.

· Develop and peer review of the List of Supplies (LoS) / Bill of Materials (BoM)

· Develop hardware integration engineering estimates (devis)

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· Bachelor’s degree in Electronic Engineering or Computer Science discipline or any other relevant fields, with at least 5 years of relevant experience

· Good level of knowledge of, and experience with Linux Operating System (Red Hat Enterprise Linux distribution preferred)

· Experience in scripting and programming languages (Shell, Python)

· Experience in large and distributed networked computer systems is a highly desirable

· Good understanding of networking protocols (e.g., IPSEC, HSRP, BGP, OSPF, 802.11, QoS) and Hands-on experience with monitoring, network diagnostic and network analytics tools

· Familiarity with a wide range of compute (HP, HPE, Lenovo, Dell) and networking (Cisco, Juniper) hardware from major manufacturers

· Work experience in a mission-critical environment (ATC-related is highly desirable)

· Solid understanding of hardware integration and testing processes

· Practical experience of validation and integration of hardware components on large, complex, software-based systems

· Strong communication skills, with the ability to write clear and concise documents that clearly articulate complex technical detail

· Able to work on multiple activities concurrently and effectively self-manage (autonomy)

· Able to work under pressure

· Cisco formal certifications (CCNP, CCNA etc) is desirable

· Cisco/Juniper NW automation desirable

General/Special Requirements:

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

· Be eligible for Security Clearance from the Singapore Ministry of Home Affairs (CAT2)

Responsibilities

● Collaborate with the sales/business development team to understand customer requirements and use cases, and identify how Company's Robotics solutions can address those needs.

● Conduct product demonstrations and presentations to potential customers, showcasing the features and benefits of company's robotics solutions.

● Develop proof-of-concept capabilities through ad-hoc software development and mechanical/electrical design with the help of internal engineering teams.

● Work closely with customers to understand their specific use cases and provide expert guidance on the integration of our robots into their operations.

● Create technical proposals and documentation tailored to customer requirements.

● Develop a deep understanding of Company's Robotics' products and stay up-to-date with the latest advancements in the field.

● Act as a technical liaison between customers and our internal engineering teams, ensuring a smooth transition from presales to implementation.

● Support the sales team by participating in customer meetings, technical discussions, and addressing customer inquiries.

● Provide feedback to to internal product development team based on customer needs and market trends

Requirements:

● Background in Computer Science/Electrical Engineering/Mechanical Engineering.

● Strong technical knowledge in their domain and the ability to work with customers.

● Should have at least one of the following:

○ Experience in Python or Javascript or C++. (or)

○ Experience in CAD software such as SolidWorks. (or)

○ Experience in mechatronics design such as working with Arduino or custom PCBs.

● Excellent presentation and communication skills.

● Ability to understand and address customer requirements and translate them into technical solutions.

Good to have:

● Experience with cloud computing platforms (e.g., AWS, Azure, Google Cloud).

● Familiarity with Docker, Jenkins, and other deployment tools.

● Exposure to backend system design to support robotics applications.

● Participation in robotics-related hackathons or competitions.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

Join our security team and help secure our organization through maintaining, engineering, and deploying security solutions. We use industry-standard security tools, in an automated fashion, to ensure our security teams can operate effectively and provide security to the company.

Responsibilities:

As an individual contributor on our Cybersecurity engineering team, youll have a broad set of responsibilities including (the mix will depend on your interests and skill level):

• Troubleshooting security problems
• Assist in the management and deployment of security products on endpoints, servers, and virtual desktops
• Design, operate, and maintain a vulnerability management program
• Assist the Security Team in responding to and remediating system and/or network security breaches
• Plan, implement, manage, monitor, and upgrade security measures for the protection of the organizations data, systems, and networks
• Ensure that the organizations data and infrastructure are protected by enabling the appropriate security controls
• Plan, create, and implement cybersecurity processes and policies
• Engage in domain-specific threat modeling and attack surface analysis/reduction
• Identify information and logs to monitor, then design and engineer the process for gathering that information
• Promotes best practices and design patterns
• Willing to do remote support for Helpdesk team escalated suppprt cases
• Willing to learn newer technology / product / solutions based on customers needs.

Required Skills:

• Proficient in exploring, evaluating, and integrating new technologies, programming languages, data models, or frameworks.
• Easily pick up new technologies and are keen to expand your knowledge
• Experience in the development of projects related to network and security automation.
• Experience in infrastructure and automation processes and tools including Ansible, and Terraform
• Fundamental knowledge of SSH, TCP/IP, UDP, SSL, HTTP, HTTPS, PKI, DNS, and other common protocols.
• Advanced experience in development in languages such as Python, bash, or Golang
• Advanced knowledge of security controls, audits, and configurations related to: Windows, Linux, ChromeOS, and macOS
• AWS

Preferred Experience (Optional but valued)

• Experience in common continuous integration tools such as GitHub Actions, Jenkins and CircleCI.
• Advanced experience with the MITRE Adversarial Tactics, Techniques, and Common Knowledge (ATT&CK) Framework
• Experienced DevOps or DevSecOps practitioner
• Advanced knowledge of security controls, audits, and configurations including SIEM (Splunk, QRadar) & EDR (Crowdstrike, Carbon Black)

Job Responsibilities :

* Involve in project implementation such as analysis, coding, testing, change request etc

* provide documented results including unit testing result, detailed design specification, RCA etc to meet project requirements

* Report progress and status updates to project manager and business sponsors.

* Working closely with development and support teams.

* Promoting continuous process and quality improvement.

Job Requirements :

* Candidate must possess at least a Diploma in Computer

Science/Information Technology or equivalent.

* 5+ years of experience with Java server-side development experience

with good understanding of core design patterns.

* Hands on experience in Java 8 and above

* Understanding distributed application environments

* Technologies - Servlets, JSF, JAX-RS , JAX-WS , JMS, JPA

* Frameworks - Oracle ADF, Primefaces, Spring , Spring Batch , Spring

Security, Spring Data , Spring MVC, Spring Boot, Hibernate

* Server - Jboss, Weblogic

* RDBMS experience - Oracle 11g, PL/SQL (SPs, Functions)

* UI Development - HTML5, CSS3, React, Angular or any other JS

* Familiar with Maven, CD/CI, Dev-OPS practices, Jenkins,

* Knowledge of consuming and providing REST APIs

* Worked in Agile environment with minimum supervision

* Strong collaborative and team work skills

* Excellent communication skills, both written and verbal

* Able to commit one (1) year contract (subject to further

extension/conversion)

Electrical Project Engineer / Licensed Electrical Worker (LEW)
Working Hours: Monday-Friday [ 830am - 530pm ]
Address: 1 Bukit Batok Street 22, #04-01 GRP Building, Singapore 659592
Salary: $2,000-$4,000

Requirements:

• Degree in Electrical Engineering (Major in Power)
• Prefer with Class 3 driving license

Responsibilities:

• Preparation of technical specifications.
• Carry out site inspections on LT and HT installations per EMA requirements.
• Assist PE/ LEW to carry out switching of electrical panels.
• Standby and attend emergency call up services at customer installations.
• Prepare incident reports, technical proposals, etc.
• Site supervision of sub-contractors on maintenance works.

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing, Deskside support and Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 2 End User Computing support and well verse in Windows OS.
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment.
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support.
• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Response Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences.
• A good team player.
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

• The Field Service Engineer provides direction and assistance to work group in order to meet assigned objectives. In this role you will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning
• Provide general technical direction and assistance to the customer in the operation, maintenance, repair, logistic support, and installation of Veolia’s products
• Provide on-site interpretation of data and technical instruction
• Provide Project and Field Service management with complete and prompt information regarding status of programs, customer problems, failures and trends.
• Provide technical assistance through on-site guidance and training in proper operation, maintenance, and troubleshooting of assigned programs and ground support equipment, including the use and proper interpretation of data and technical instructions
• Provide communication to Product Support and Field Service regarding all program activities and problems through regular, timely reports
• Review reported malfunctions and identify / analyze any undesirable trends
• Make recommendations on findings
• Review effectiveness of maintenance actions in order to identify training needs
• Be one of the focal points for assigned account for all matters concerning Veolia products and services and total support, ensuring that both customer and Veolia objectives are met
• Developing and maintaining a customer preference relationship toward Veolia
• Execute value generating plans and coordinate both internally and externally with the customer
• Outlining, presenting and selling the value of Veolia products and services that can benefit customer needs
• Ensure that all the KPIs set by customer are met
• Ensure customer satisfaction by providing high service standards.

Requirements:

• Diploma or Degree in chemical, environmental engineering. Chemistry or equivalent knowledge and experience are welcome.
• Those with experience in water treatment & field service in chemical industry, will be an added advantage.
• Able to work well and excel in a team. Demonstrates leadership qualities.
• Strong communication skills (both written and verbal)
• Possess valid class 3 driving license.