To assist Design for Safety Professional to carry out following duties:

• Recognise the importance of design for safety and health of a construction project to eliminate or mitigate such risks throughout the different life cycle of a building and structure
• Recognise, and advise stakeholders on, the duties and responsibilities of DfS Professionals in accordance with relevant legal requirements and WSH (DfS) Regulations
• Prepare for DfS review meetings in accordance with WSH (DfS) regulations
• Coordinate DfS review meetings for consideration of safety and health risks during different phases in the lifecycle of a building and structure
• Apply hazard identification tools and risk assessment for DfS review meetings in accordance with organisational procedures
• Establish types of safety and health records to be kept in the DfS Register in accordance with WSH(DfS) regulations
• Coordinate the flow of relevant information to stakeholders throughout the construction project
• Familiar with Design for Safety Guidelines of MOM
• Able to work with consultant team to carry out Design for Safety Review Meetings / Workshops in accordance to GUIDE 1, GUIDE 2 and GUIDE 3 according to MOM regulations
• Prepare and Maintain Design Risk Registers
• Prepare Design Risk Register documentation and handed over to relevant parties

JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical Installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical Installation, testing and commissioning

JOB REQUIREMENT

• Bachelor's degree in Electrical & Electronic engineering.
• Minimum 3 years work experience in process plants or in the water/wastewater industry, with good knowledge in electrical desgin of water and/or wastewater treatment plants.
• Familiarity with AutoCAD, Navisworks.

Duties & Responsibilities:

• Prepare and provide proposal/offer to customers for Chamber, Oven, Chiller & Semiconductor Testing Equipment.
• Prepare onsite for service budgets.
• Prepare quotations and follow up on sales enquiries/proposals from customers, to meet the requirements.
• Manage day-to-day operational aspects of sales follow-up.
• Prepare progress reports and customer updates.
• Continually seek opportunities to increase customer satisfaction and deepen customer relationships.
• Manage sub-contractor and ensure work compliance with specifications.

Job Specifications:

• Diploma holder in Electronics/Electrical/Mechatronics Engineering or equivalent.
• A minimum experience of 1-2 years in the Refrigeration Industry.
• Good knowledge and experience in Sales.
• Willing to travel.
• Self-motivated and able to work independently, with minimum supervision.

JOB SCOPES

1. Develop detailed designs and specifications for HVAC systems, including air conditioning, heating, and ventilation systems.
2. Create and review blueprints, schematics, and system layout.
3. Select appropriate mechanical equipment and components based on system requirements and performance criteria.
4. Coordinate with other engineering disciplines, such as electrical and structural engineers, to ensure seamless system integration.
5. Oversee the installation of HVAC systems to ensure they are installed according to design specifications and industry standards.
6. Conduct system commissioning to verify that all components are functioning correctly and efficiently.
7. Troubleshoot and resolve mechanical issues in HVAC systems to minimize downtime and ensure reliable operation.
8. Design systems with a focus on energy efficiency and sustainability.
9. Evaluate and recommend energy-saving solutions and technologies to reduce operational costs and environmental impact.
10. Ensure that HVAC systems comply with local building codes, safety regulations, and industry standards.
11. Address any safety concerns related to the mechanical aspects of HVAC systems.
12. Manage HVAC projects from conception through to completion, including budget management, scheduling, and coordination with contractors and suppliers.
13. Monitor project progress and resolve any issues that arise during the implementation phase.
14. Communicate effectively with clients, project managers, and other stakeholders to understand their needs and provide technical support.
15. Provide training and documentation for system operation and maintenance.
16. Stay updated with the latest developments and technologies in HVAC systems.

ABOUT SIOUX

Sioux is a strategic high-tech solutions provider that develops, innovates and assembles complex high-tech systems

We have a team of over 1,200 dedicated engineers who either support our clients or serve as their Research and Development department. Our strong productivity allows us to speed up product development, giving our clients a competitive edge at a better cost-effectiveness.

As a rapidly growing employer, Sioux values its employees' growth and well-being. We invest in their career development and foster a positive work environment that promotes personal and professional growth.

SIOUX IN SINGAPORE

Sioux Singapore plays a pivotal role in the Asian market by offering R&D services from our centers across Europe and Asia to customers, leading development teams in Asia, from Singapore

This expansion allows us to meet the changing needs of our domestic and international (OEM) customers in the semiconductor, analytical, and medical industries.

The Role

Your role will involve developing equipment control software to support customers in the mentioned domains. Your responsibilities include:

• Collaborating with architects to define product architecture in your domain.
• Analyze customer needs in software requirement engineering
• Analyzing, designing, implementing, and test the control software.
• Conducting peer reviews to ensure product quality.
• Leading the small development team and ensuring team performance.
• Working as an integral part of a scrum team and handling user stories across the full stack.
• Developing functionality using Agile practices, emphasizing speed and quality.
• Leadership roles for higher positions.

The Job Scope

Develop testable quality code in Python for following machine control functionalities:

• Qt Python UI development
• Machine Control and Sequencing
• System calibration and validation
• Data Processing and analytics and visualization
• Lead a small team

Job requirements

QUALIFICATIONS AND EXPERIENCE

• A technical background with a higher professional or university education.
• Strong background in the semiconductor, analytical, or medical equipment domain.
• Experience in developing equipment control applications, including working with PC-based control, embedded controller, or motion controller
• A minimum of 4 years of experience in Python full stack programming
• Additionally, Technical Lead / Designer role requires minimum 4 years in object-oriented analysis and design with common design patterns
• Additionally, Technical role requires min 4 years leading Scrum development teams with requirement engineering, Sprints managements and technical design reviews

DESIRABLE SKILLSET

• Able to handle complex software solution
• Experience with Qt for Python
• Experience with Python libraries such as NumPy, SciPy
• Experience with Python chart capabilities such as matplotlib
• Worked with Agile Scrum and Kanban team
• Worked with git workflow with online repositories like Gitlab, GitHub, Bitbucket etc
• Worked with git tools like SourceTree, TortoiseGit, GitKraken, Fork etc
• Worked with Continuous Integration tools

DESIRABLE SOFT SKILL

• A preference for autonomy and responsibility in organizing your work.
• Good communication skills and ability to work effectively within a geographically distributed team.
• For Senior positions, good leadership skills to lead a small team of 2-5 developers.

WHAT WE CAN OFFER

You will work within a pleasant working environment, in which High-Tech, High-Fun & High-Value are central.

• Competitive Compensation: Attractive salary, 13-month salary and performance bonus
• Hybrid Work Arrangement: Flexible working environment with 3 days in the office and 2 days of remote work per week, and flexible working hours.
• Comprehensive Healthcare: Inclusive healthcare coverage and annual health screening.
• Work-life balance with generous Leave: Up to 20 annual leave days and 10 company sick leave days without requiring a medical certificate.
• Education Budget: SGD 5,000 per year for training courses aimed at career development. We are committed to investing in your growth and development.

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 32 months
• Start from: March 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 4 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

About us

Since the 1930s, the way we commute, socialise and even how we make payments have changed, and yet our fundamental approach to the healthcare system hasn’t.

At Ordinary Folk, we’re reimagining the building blocks of healthcare, through Noah, Zoey, and Cyrus. Noah allows men to receive remote diagnosis and treatment across varying areas of care. Through Zoey, women’s sexual wellness and fertility journeys are supported with thoughtful products and services. Cyrus, our modern logistics fleet makes ultra fast deliveries for medication with the help of AI.

Job description

As a Full-stack Engineer at Ordinary Folk, you’ll help to:

• Developing and directing software system validation and testing methods.
• Directing our software programming initiatives
• Overseeing the development of documentation.
• Working closely with clients and cross-functional departments to communicate project statuses and proposals.
• Analyzing data to effectively coordinate the installation of new systems or the modification of existing systems.
• Managing the software development lifecycle.
• Monitoring system performance.
• Communicating key project data to team members and building cohesion among teams.
• Developing and executing project plans.
• Applying mathematics, and statistics to problem-solving initiatives.
• Applying best practices and standard operating procedures.
• Creating innovative solutions to meet our company’s technical needs.
• Testing new software and fixing bugs.
• Shaping the future of our systems.

What we’re looking for from you

• Strong knowledge of HTML, CSS, and Javascript/Typescript
• Proficiency with React for client-side development and Node.js for backend development
• Experience with relational database (e.g. PostgreSQL)
• Experience in production development of RESTful APIs
• eCommerce experience. You have experience building eCommerce platforms (e.g. customer
• management, transactions, order, invoicing) and have the requisite skills to meet the technical demands.
• Startup experience. You will have a huge passion for startups and fast-growing teams. You will have been part of the journey of a successful startup.

Why join Ordinary Folk?

Our mission is to revolutionise the way people access medical treatment.

We’ve built brands tailored to the differing needs of people across diverse Asian cities, and delivered healthcare solutions the modern way — online and to your doorstep.

Working with medical professionals in each country, who are armed with decades of expertise in their specialised fields, allows us to tailor treatment plans that work for the broad range of individual needs for their local populations.

Looking for the highlights?

• We’re one of the fastest-growing healthcare companies in Asia.
• You’ll be working alongside team members who’ve joined us from companies like BBH, Grab, Unilever, Ogilvy and IDEO.
• Join a team of 40 on the ground floor of an exciting start-up ready to blast off.
• Employee equity scheme giving you a share in the company and the work we do.
• A development allowance so you can upskill yourself and your career.

What is working at Ordinary Folk like?

We’re not your stereotypical healthcare company. We’re a bunch of creatives, entrepreneurs and tech-driven individuals from a wide range of cultural backgrounds – all with a focus on delivering better health to people.

Our team is based around Asia and as long as you’re between GMT+7 and GMT+11, you can work wherever you want. We also hate overbearing managers – at Ordinary Folk, the best ideas, not the manager’s ideas, win.

Life moves pretty fast around here because speed and execution matter more than anything else. But we believe that the A+ players at Ordinary Folk need and deserve the freedom to contribute their best to the company so they can help keep our trajectory on the up.

Contact and apply to [email protected]

Key Responsibilities

Provide guidance and technical assistance to sales and service teams.

Offer customized solutions for technical issues and sales inquiries.

Assist the service team with equipment repair and maintenance.

Develop procedures for equipment testing, maintenance, and operation.

Coordinate in-house product assembly and validation testing and produce test reports.

Conduct technical presentations and product training for clients.

Create and maintain drawings, bills of materials, and design documentation.

Discuss technical requirements with clients on-site and coordinate site work.

Prepare method statements and reports for site work.

Any other ad-hoc duties as assigned.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The researcher will be part of the team of the MCCS NATURE Project (https://www.nparks.gov.sg/Cuge/Programmes-Schemes/Research%20Programmes/MCCS%20Programme). The primary role involves developing and validating CFD models to study wave attenuation by mangroves, seagrass, and coral. Responsibilities include calibrating simulations with experimental data, analyzing shear coefficients and drag forces, and contributing to interdisciplinary research on coastal protection, with an emphasis on delivering accurate and impactful modeling insights.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to ensure all project deliverables are met.

Undertake these responsibilities in the project:

1. Computational Fluid Dynamics (CFD) Simulations:
• Develop and implement CFD models to simulate the effects of mangroves, seagrass, and coral on wave attenuation.
• Conduct parametric studies to analyze wave interaction with natural coastal ecosystems under varying conditions.
• Optimize the model to predict shear coefficients, drag forces, and energy dissipation.

2. Experimental Calibration and Validation:
• Collaborate with experimental teams to obtain data from wave flume tests and field studies.
• Calibrate CFD models using experimental data to ensure accurate representation of physical phenomena.
• Validate simulation results to confirm reliability and applicability of the models in real-world scenarios.

3. Analysis and Interpretation:
• Extract and analyze key parameters such as drag forces, flow patterns, and wave energy dissipation.
• Evaluate the influence of structural and biological properties of mangroves, seagrass, and coral on wave attenuation.

4. Research Documentation and Dissemination:
• Prepare technical reports, research papers, and presentations to disseminate findings to academic and industry stakeholders.
• Contribute to project proposals and progress updates for funding agencies.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.

5. Collaboration and Mentorship:
• Work closely with interdisciplinary teams, including coastal engineers, marine ecologists, and hydrodynamic specialists.
• Mentor junior researchers and students involved in related projects.
• Assists in co-supervision of Final Year Projects (FYP) or capstone projects students together with the project

6. Tool and Methodology Development:
• Innovate and improve methodologies for CFD modeling of complex natural systems.
• Stay updated with advancements in CFD software and techniques to enhance research outcomes.

7. Project Management Support:

• Ensure timely execution of project milestones related to CFD modeling and validation tasks.
• Coordinate with external collaborators and manage data-sharing protocols.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements

• PhD or Master degree in a related field with a focus on coastal engineering, oceanography, or hydrodynamics.
• Proficiency in CFD modeling software (commercial software and open source)
• Strong analytical and problem-solving skills.
• Research experience in coastal and ocean waves is preferred.
• Excellent communication (verbal and written) and teamwork abilities

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Responsibilities:-

• Ensure precast produced in accordance to shop drawings
• Update of precast production status
• Carry out checks between precast plants
• Ensure precast quality in accordance to specifications

Requirement

• Minimum 2-3 years’ experience in precast management as a supervisor /
• engineer
• Able to work independently with minimal supervision
• Applicants with Precast Concrete Construction Course certification will have an
• advantage

Job Description:

• Handle project planning, scheduling, monitoring and updating to meet project completion targets
• Perform site planning, coordination and inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met
• Liaise with the BIM team to update the drawings or BIM Model with the latest information available timely
• Prepare as-built drawings or BIM Model and compile O&M Manual for submission
• To assist in project coordination and oversee of all Civil and Structural works on site and ensure all related activities are carried out as per drawings
• Review architectural & structural submission documents & submission drawings prior relevant authorities' submission
• Assist the Project team in site walk-down survey with other discipline engineers and Client representatives as required, in resolving technical issues until construction completion
• Liaise with internal and external parties for project management
• Any ad-hoc duties as assigned

Job Requirements:

• Minimum of 2 years’ HDB experience
• Recognized Degree in Civil Engineering, Project Management, Structural Engineering or equivalent approved by PEB, BOA or SISV
• Good knowledge of technical design and engineering, construction methodology and construction planning
• Good oral, written and inter-personal communications skills in dealing with individuals and groups at all levels
• Proficient in Microsoft Office, AutoCAD and knowledge of BIM
• Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment
• Obtain CONQUAS supervisor certificate will be added advantage

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

Mission:

- Develop Go to Market Strategies on the IDEC’s focused products for specific vertical markets in the APAC Region

- Meet the growth target of product group in the APAC

- Develop sales across APAC & Middle East as per assigned targets

- Assist distribution channel during customer visits to conduct design-in opportunity

- Regular visits to direct account/customers to maximize IDEC opportunities

- Generate NBO (New Business Opportunities)

- Maintain a strong level of relationship with Distributors & Direct Accounts

- Following the group's pricing and sales policies

- Provide timely and accurate weekly and monthly Sales report to the sales management

- Maintain and share competitive intelligence

- provide customers feedback, market trend and new product development ideas to the sales/product management

Main Tasks:

- Tracking product performance against target

- Provide go to market strategy and for successful penetration into the focused vertical markets, identifying suitable portfolio for specific vertical markets

- Sales management and mentoring of distributors in assigned territories to generate NBOs and achieve budget

- Periodic visits to the distributors to conduct business reviews and regular joint customer visits

- Raise and follow up special price enquiries, prepare quotations with objective to maximize margin

- Assist distributors during exhibitions both at Marcom level and physical presence during the event

- Finding new prospective distributors and customers when needed

- Analyzing feedback from various channels and proposal of actions to Management

- Collect and feedback any competition information

- Prepare and Manage Sales Forecast quarterly/yearly in conjunction with Company Business Plan

- Work with colleagues and managers to understand & promote Company strategy & objectives

- Presentation of periodic reports with activity analysis

- Any other reasonably duties define by direct manager

Key Performance Indicators:

- Achievement of company turnover objective

- Achievement of personal turnover objective

- Achievement of Product and Vertical market growth target

- Achievement of NBO generation & win (number to be defined)

Territory Focus: APAC and Middle East. Region to be defined (e.g. Singapore, Malaysia, Indonesia, Vietnam, Philippines, S. Korea, Australia)

Candidate Profile:

- Bachelor’s Degree in electrical engineering is preferred (not mandatory)

- Minimum of 4 years of experience in OEM or distribution sales, product management

- Experience working with multiple distribution channels

- Ability to translate customer requirements into workable solutions

- Strong oral and written communications skills

- Strong technical aptitude & the ability to understand & communicate technical information

- Strong organizational skills & the ability to coordinate multiple projects simultaneously

- Able to travel overseas as required

- Good attention to detail and strong follow-up skills

- Ability to analyse sales results, interpret data and prepare action plan accordingly

- Knowledge of Microsoft Word, Excel and PowerPoint

- Experience with Salesforce.com is a plus (not mandatory)

- Posess a driving licence and car is desired (not mandatory)

Attractive package based on fixed salary + Variable bonus based on KPI’s achievement + Local travel allowance + Telephone allowance.

We are seeking a skilled Civil Engineer to support the site project. The candidate will also supervise concreting operations and manage estimation of Bill of Quantities, project progress claims and earthwork supervision. Proficiency in AutoCad to review and make necessary adjustment to project

drawings.

Responsibilities:

• Install, configure, and maintain server operating systems (Windows/Linux/VMWare)
• Deploy, configure, manage, and troubleshoot the following software/hardware - Active Directory, Exchange Server & Exchange Online, VMware ESXi, SAN Storage & Backup
• Perform routine system administration duties
• Monitor servers and troubleshoot issues
• Provide additional support when necessary (eg. backup and storage functions)
• Perform proper documents for all processes
• Recommend solutions and ensure all IT issues have been corrected, and maintain records of work performed
• Provide technical support across the company, including Singapore, regional offices, and retail stores
• Provide technical support to server and network infrastructure and perform regular upgrades to ensure systems remain updated
• Troubleshoot system failures or bugs, and provide solutions to restore functionality
• Assist with any ad-hoc tasks as assigned

Requirements:

• Minimum Diploma in Computer Science, Information Technology, or a similar field
• At least 2-3 years of working experience in the related field
• Experience in configuring, monitoring, and troubleshooting systems
• Able to communicate effectively in both oral and written aspects
• Able to work independently and in a team
• Possesses analytical skills and works well in a fast-paced environment

Computer Engineering Technical Skills

- Knowledge of operating systems

- Understand computer network and hardware

- Debugging and troubleshooting

- Strong written and verbal communication skills

- Interested and passion in robotics

Jobe Description

- Development and test new features for robotic systems

- Participate in the whole development cycle including design,

development and deployment

- Application of software product onto real-world industrial

environment

- Product fiscovery and evaluation of emerging technologies for robotic

use cases

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

Responsible to manage system development, implementation and support of EAI applications, including:

• Develops applications that effectively accomplish client objectives and user needs.

• Designs and writes code for applications and maintain applications databases.

• Analyzes and edits existing software applications to improve and optimize functionality, fix problems, and enable their use on new hardware platforms.

• Remodels and adapts applications as needed to optimize performance.

• Identifies specific client needs and preferences related to the application.

• Tests applications extensively to ensure they are error and bug-free.

• Installs applications and acts as technical advisor.

• Communicates with relevant internal technical stakeholders to obtain information on project limitations, performance requirements and interfaces.

• Consults with clients in the design phase to determine client needs.

• Produces software documentation following company/client software process and templates.

• Participates in software product review meetings and team meetings.

• Performs any other related task as required.

Key Requirement

• Bachelor's degree or equivalent in computer science or software engineering or related field.

• Seasoned Software Applications Engineering, Software Development experience, or related work experience.

• Seasoned experience with Programming Languages such as (but not limited to) ANSI C, C++, and Unix Korn Shell programming

• Seasoned experienced with Linux or Unix and Windows operating systems.

• Seasoned experience working with Oracle Tuxedo, IBM MQ Series.

• Experience in banking or financial industry

• Certification in various programming languages, for example (but not limited to) Java, Perl, Python, C++ preferred.

Job Position:- Resident Engineer (M&E)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Mechanical or Electrical Engineering or equivalent.
• Possess at least 8 years of relevant and practical experience on site;

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local mechanical & electrical codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

My client is a leading consulting company in the Lifesciences industry and works with big pharma players in the market for different engineering projects. Being in the consultancy business for over 10 years, one of the area they truly invest in is training and growing your career development.

My client believes in digital transformation and will be looking to hire talents with the following diciplines

Computer System Validation CSV Engineer

- Perform risk assessment and validation on CSV systems

- Execute validation protocols (IQ, OQ, PQ) and prepare detailed documentation

Laboratory Instruments/ Equipment Engineer

- Execute qualification protocols for lab equipments (HPLC, GC)

- Troubleshoot and resolve issues with lab equipments

CQV (Commissioning, Qualification and Validation)

- Manage and optimise HVAC systems, utilities and overall facilities infrastructure

- Oversee any facility upgrades and maintenance schedules

To be successful you should have

- Degree in Engineering/ Lifesciences or a related discipline

- Proven experience of at least 2 years in this filed

- Familiar with industry standards, regulations such as GxP, ISO, FDA, EMA)

Interested applicants, please send your profile to [email protected]

Gina Yeo

Life Sciences Consultant/ Head

CEI: R1660520 | Licence No: 19C9622 |

Job Position:- Resident Engineer (C&S)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Civil or Structural Engineering or equivalent.
• Registered as Resident Engineer with BCA/IES/ACES.
• 3 to 10 years of relevant site supervision experience as a resident engineer.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

As a global leader in power and thermal management solutions, Delta Electronics was founded in 1971 and is headquartered in Taipei, Taiwan with annual revenue exceeding $13 billion. Our wide range of products and solutions cover power supplies, energy management systems, display solutions, and industrial automation products.

We are known for our focus on innovation, sustainability, and energy efficiency. Active investment in research & development, and implementation of cutting-edge technologies ensures our business drives positive environmental impact.

Looking forward to having you join our 85,000 colleagues in building a Smarter and Greener future, Together!

Position Overview:

As a Datacenter Infrastructure Field Application Engineer or Presales Engineer, you will be responsible for supporting and driving the sales of solutions within the datacenter infrastructure field. In this role, you will work closely with customers, sales teams, and other technical personnel to ensure the successful deployment and integration of CDU/Cooling systems in datacenter environments.

Key Responsibilities:

• Expertise in CDU/Cooling Solutions: Possess in-depth knowledge of Data Center products, solutions, and services, keeping up-to-date with industry trends and technological advancements related to datacenter infrastructure.
• Sales Support: Collaborate with the sales team to participate in customer meetings and presentations, understanding customer needs, and proposing appropriate solutions.
• Technical Consultation: Engage in technical discussions with customers to understand their datacenter infrastructure requirements and propose tailored solutions.
• Solution Design and Proposal: Create detailed technical proposals and designs that address customer requirements, including system configurations, power distribution, backup options, and monitoring capabilities.
• Project Management: Collaborate with project managers, engineers, and installation teams to ensure the successful implementation and commissioning of systems in datacenter environments. Provide technical guidance and coordinate tasks throughout the project lifecycle.
• Demonstration and Training: Conduct technical demonstrations and training sessions for customers and sales teams to showcase the capabilities and benefits of solutions.
• Customer Relationship Management: Build and maintain strong relationships with customers, addressing their technical queries, providing post-sales support, and proactively identifying opportunities for additional solutions and services.
• Industry Expertise: Stay updated with the latest industry standards, regulations, and best practices related to datacenter infrastructure, power distribution, and systems.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering, Computer Science, or a related technical field is preferred.
• Experience: Prior experience as a Field Application Engineer, Presales Engineer, or a similar role within the datacenter infrastructure industry, with a focus on CDU/Cooling solutions and power management. Experience in supporting sales teams and customers is highly desirable.
• Communication Skills: Excellent verbal and written communication skills to effectively convey technical concepts and solutions to customers and internal stakeholders. Ability to deliver compelling presentations and demonstrations.
• Problem-solving Skills: Strong analytical and problem-solving abilities to identify customer requirements, propose effective solutions, and troubleshoot technical issues.
• Project Management: Familiarity with project management methodologies and tools to manage multiple projects simultaneously, ensuring timely delivery and customer satisfaction.
• Customer Focus: Demonstrated ability to understand customer needs and offer suitable solutions. Strong customer service orientation and ability to foster long-term customer relationships.

Key Accountabilities

• Technical support to Group sales affiliates in the region for product groups such as control products, IAQ products and air conditioning installation material products
• Perform as the technical supporting desk
• Support the installation and commissioning for each job site
• Create demo kits for assigned product for regional promotion
• Support the marketing department to give the technical advice for the sales promotion enhancement
• Analyse and test product failures for better quality achievement
• Any adhoc duties as assigned by superior

Requirements

• Degree in Electrical/Electronic/Mechanical Engineering, or relevant
• Experience in air-conditioning or electrical industry will be an advantage
• Proactive and influential personality with ability to persuade and drive decisions
• Good to have PC programming and drafting skills
• Willing to travel with APEC regions

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a mobile app for visualising geospatial data.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  1. Implement code for improved cartographic algorithms and thematic map designs.
  2. Design human-subject experiments that test how the implemented map designs are used on electronic devices.
  3. Obtain approval for conducting experiments from the Institutional Review Board.
  4. Perform statistical analysis and report the results in the format of journal articles and conference contributions.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements

• Have relevant competence in the areas of mobile app development.
• Have programming experience in Python and JavaScript.
• Have a Ph.D. degree in computer science, statistics, geography or a closely related field from a regionally or internationally accredited institutions.
• Knowledge of experimental design and computational geometry will be advantageous.
• Knowledge of C++ and R is desirable.

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239