Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

· Contribute to research and development efforts in the marine and offshore, maritime, and underwater systems areas, in particular the modelling and control of physical systems such as autonomous vessels, underwater robots and offshore renewable energy systems.

· Work in a multidisciplinary team to continuously develop and enhance our sensing, data acquisition, and cyberphysical model test capabilities. This work includes requirements formulation, sensor and actuator acquisition and characterisation, control algorithm design and implementation, controller tuning, validation and verification etc.

· Actively engage with other team members to share ideas and exchange knowledge, by e.g. producing and maintaining technical documentation, and sharing developments in the state-of-the-art.

· Survey literature and implement state-of-the-art techniques and tools (such as AI, deep learning, machine learning, etc) to solve challenging problems.

· Collaborate with industry partners, affiliated research institutes and other relevant stakeholders to contribute to grant proposals for research funding consistent with the strategic goals of TCOMS.

· Any other duties as assigned by supervisor.

Requirements:

Bachelor's/Master's Degree in Electrical Engineering, Computer Engineering / Science, Mechatronics, or other related disciplines.

Work Experience:

1. Preferably having relevant research/industry experience with competent knowledge in some of the following areas:

a. Control system applications or experiments using Advanced/PID control

b. Common PLC/SCADA/Embedded Controller systems.

c. Electrical motor/inverter control systems

d. Robotics

e. Digital twins

2. Knowledge of software such as LabView, MATLAB, etc. and experience with engineering simulations and prototyping tools.

Other Requirements:

· Good interpersonal and communications skills.

· Ability to adapt and work effectively as members of a team.

· Resourceful and self-driven with professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

This IT System Engineer role reports to the IT Team Lead to maintain, implement projects, and enhance the IT Infrastructure not limited but included on server, network, security and so on. Provide 2nd and 3rd level IT support for the company's users, good IT career advancement and IT infrastructure environment for technical hands-on opportunity.

The successful candidate will require the following essential qualifications, experience, and attributes:

Responsibilities:

• Manage infrastructure services provided by vendor/s to ensure connectivity, availability of applications and services within the company both locally and regionally.
• Day-to-day support to the Group’s IT infrastructure (local and regional), including servers, desktops, IP phones, email, software updates, printers, backup systems and networking and WIFI equipment, on-boarding, off-boarding and training.
• Provide technical support for PC hardware, software, applications, and IT requests and tickets and close them timely.
• Responsible for the configuration, installation, and support of equipment.
• To participate, assist and support in new project implementations.
• Configuring firewalls, routing, and switching to maximize network efficiency and security.
• Configure, deploy, and maintain Fortinet, Dell, HPE managed Layer 2 Layer 3 switches.
• Manage Hybrid Windows Server Domain Controller, Windows server, VM Infrastructure, Office365, Firewall configurations, Endpoint protection.
• Periodically monitor servers, network devices and backups.
• Perform AD user/computer management and system administration on servers.
• Administer M365, MS Teams, SharePoint Online, Exchange Online, Azure AD, and TrendMicro.
• Plan and manage patch management process and follow up on the status and windows vulnerabilities identified.
• To assist and report to IT Team Lead in any other IT-related activities or projects as assigned from time to time.

Requirements

• Degree in Computer Science, Information Technology, or related field.
• 3 to 5 years of IT network administration related experience, with prior experience in managing IT vendors (overseas and local) for technical issues resolution.
• Administration and management of servers, storage, networking and appliances, virtualization, mobility, and remote access services.
• Hands on experience in networking, routing, switching, and understand TCP/IP concept well.
• Excellent knowledge of best practices around asset management, control, and monitoring of server and network infrastructure.
• Any professional MCSA, CCNA or ITIL certified will be an added advantage.
• Hands-on knowledge with FortiGate/Fortinet firewall products will be an added advantage.
• Experience in M365, Exchange Online, and SharePoint management is an added advantage.
• Experience in Microsoft Azure Cloud is an added advantage.
• Experience in security patch/fix management and Synology NAS management
• Experience in deployment and installation of Windows Server 2008 R2/2012 R2/2019
• Highly motivated and hardworking, with a positive attitude, willing to learn.
• Good problem-solving skills and ability to work independently when required.
• Strong sense of responsibility and commitment to providing IT support to end-users
• Knowledge in Veeam Backup, AD & File Server, SQL Server, TrendMicro Anti-Virus, Email Security, Fortinet Technologies
• Good knowledge of Microsoft Windows, Active Directory, Hyper-V, Backup Solution, NAS
• Good knowledge of network infrastructure that includes Cisco/Dell command line, TCP/IP, DNS, DHCP, VPN remote access, WAN, LAN, VLAN, WiFi, VPN, Firewall, router, switches etc.
• Good knowledge of system level monitoring, performance tuning and backup solutions
• Positive attitude, willing to learn, work as a team and independently as required.

Job description

1. Perform research in the following areas relating to coastal protection and adaptation to climate change:

- Wave attenuation over mangroves, seagrasses and coral reefs

- Feasibility of floating wetlands

2. Conduct literature review, field surveys and liaise with relevant government agencies to establish configurations of coastal vegetation/coral which are representative of those commonly found in Singapore.

3. Assist in planning and executing physical modelling and simulations involving free-surface waves interacting with artificial coastal vegetation/corals, as well as waves interacting with floating wetlands.

4. Perform numerical modelling and simulations using Computational Fluid Dynamics (CFD) and relevant tools for validation with model test results, and subsequently conduct parametric study and interface with other research partners.

5. Any other duties as assigned by supervisor.

Job Requirements

Qualification & Field of Study:

Bachelor/Master's Degree in Coastal Engineering, Civil/Mechanical Engineering, Naval Architecture, Ocean Engineering or other related disciplines.

Work Experience:

1. Preferably having relevant research/industry experience with competent knowledge in some of the following areas:

- Coastal engineering, civil engineering and/or naval architecture.

2. Prior experience/knowledge of the following software/programming languages will be preferred:

- CAD software such as SolidWorks, Rhino, and/or AutoCAD

- CFD tools such as OpenFOAM, and/or StarCCM+

- Hydrodynamic analysis tools such as SESAM, OrcaFlex and/or WAMIT

- Data analysis tools such as MATLAB

- Programming languages such as python, C++ and/or FORTRAN

3. Experience with model tests in wave flumes or basins, including experimental design, model setup, sensing and data acquisition, will be an advantage.

Other Requirements:

- Good interpersonal and communications skills.

- Ability to adapt and work effectively as members of a team.

- Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

• Design and develop the red team's customized secure system (remote control program), and ensure that the endpoint protection can be bypassed such as Crowdstrike, Windows Defender, 360 Safeguard
• Reverse analysis of common EDR and HIDS to identify methods for bypassing detection, and embed security principles into the design of system architectures to mitigate the risks
• Research the persistence solutions under common operating systems such as Windows, MacOS, and Linux
• Perform red team engagements related to the periodic review and audit activities of infrastructure security systems (IDC network, office environment, cloud native) and maintain documentation of security standards and procedures

Requirements

• Bachelor’s degree or higher in Computer Science, Information Technology, Programming & Systems Analysis, Engineering, Statistics, or other related fields
• Minimum 3 years of relevant work experience
• Extensive experience in RAT (Remote Access Tool) development, with the ability to customize attack frameworks like Cobalt Strike
• Extensive experience in anti-endpoint protection, providing solutions to bypass the detection of EDR such as CrowdStrike, Windows Defender, 360 Safeguard
• Experience in persistence solutions under common operating systems (Windows, MacOS, Linux)
• In-depth understanding of security mechanisms of Windows/Linux systems, and familiar with offensive techniques in ring0/ring3
• Proficient in scripting/programming languages like C/C++, Go, PowerShell, Javascript, ASM, etc
• Strong reverse engineering skills with proficiency in tools such as IDA Pro, OllyDBG, WinDBG, GDB, etc
• Strong communication skills and effective teamwork spirit
• Self-starter and fast learning ability

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and deploying functional networks which include LAN, WLAN, WAN
• Responsible in monitoring network performance and integrity and resolving issues tiers of support have escalated by troubleshooting cloud and local infrastructure
• Responsible for planning out network installation and/or upgrade project, assign milestone tasks to support personnel and meet company deadlines for full implementation,
• Responsible for creating, overseeing and testing security measures
• Responsible for mentoring junior team members

Requirements

• Min Degree in computer Science, Engineering or a related field
• Min 3 years of working experience as a Senior Network Engineer or Network Administrator
• Professional certification (e.g. CCNP, CCDP)
• Experience in network administration and architecture
• Experience with access control models and network security

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

The Verification & Validation Engineer is responsible for:

• Verifying the impact of System Engineering Change Requests (ECR's) and defining and submitting on-time and on-budget, test procedures and associated scenarios to the System Engineering Manager or Project Managers, in order to verify and validate the system (off-line, simulator and on-line) in the context of Project and or Bids
• Performance testing and functional verification during partial integration [Integrated Block Builds [IBB] testing]
• Carrying out validation tests, in coordination with customer representatives, during Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) at the program’s relevant site
• Tracking and validating the Problem Change Report (PCR) corrective actions, in coordination with various engineering disciplines and teams Capturing test results and providing/managing PCR updates in the appropriate databases and applications
• Providing detail reporting of test results and briefing the Management Team (PM + Engineering) and external Customer
• Supporting the Project Manager/Project Team in the delivery of Customer solutions via the on-time, on-budget performance of V&V activities.

In coordination with the Discipline Manager and Solution Engineering Manager:

• Prepare scope and workload estimates of Verification and Validation activities
• Support the personnel engaged in the overall validation of systems, during all phases of the solution delivery/deployment with a focus on Factory and Site Acceptance Testing (FAT/SAT)

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Key Responsibilities

• Management of on premise Windows and Linux based servers, workstations, HPC and end-user devices as well as well supporting infrastructure such as Active Directory, NAS, Network and Security appliances.
• Administration and orchestration of AWS resources to support operations and projects.
• Assist in the review and implementation of enhancements to existing Corporate and Scientific IT infrastructure to meet business outcomes.
• Assist in managing IT inventory and plan for IT infrastructure obsolescence.
• Identify and streamline existing processes with RPA (Power Automate)
• Support end-user devices with installation, configuration, and troubleshooting of hardware, software and network related issues.
• Other duties as assigned by supervisor

Job Requirements

• Degree or Diploma in IT-related discipline.
• Relevant IT certifications (Microsoft, AWS, Cisco/Fortinet) Work experiences & Skillsets
• At least 5 years of hands-on experience in administering on premise and/or cloud based IT infrastructure and services in a corporate or scientific environment.
• Good working knowledge and understanding of the cybersecurity landscape, configuration and management of network and security appliances.
• Experience with both Windows and Linux based systems as well as Powershell and bash scripting.
• Experience in Microsoft Power Automate
• Solid organizational skills and attention to detail while juggling demands from stakeholders.
• Pro-active team player that is resourceful, self-driven with a high degree of professional integrity.
• Good interpersonal and communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The candidate will be working on projects related to vessel electrification and underwater robot.

Job description

1. Implement state-of-the-art techniques and tools such as data-driven modelling, AI, deep learning, machine learning etc, to solve challenging problems.

2. Perform dynamic modelling of physical systems, control design and the coupling of numerical and physical systems applied to electric vessels, underwater Robotics and/or other systems operating in the ocean environment.

3. Develop hardware and software control architectures, sensing systems to support R&D in the areas of offshore hydrodynamics and fluid-structure interactions. This includes developing, testing, troubleshooting software and verification procedures.

4. Develop engineering requirements, specification and validation criteria for high-quality research using combinations of physical experiments, sensing, numerical simulations as well as data analytics to develop integrated physical-numerical modelling, simulations and applications.

5. Survey literature and implement state-of-the-art techniques and tools (such as AI, deep learning, machine learning, etc) to solve challenging problems.

6. Collaborate with industry partners, affiliated research institutes and other relevant stakeholders to contribute to grant proposals for research funding consistent with the strategic goals of TCOMS.

7. Any other duties as assigned by supervisor.

Job Requirements

Qualification & Field of Study:

The candidate should have a background in engineering / computing or related fields.

Other Requirements:

· Good interpersonal and communications skills.

· Ability to adapt and work effectively as members of a team.

· Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Position

The department of Corporate Functions and Support IT (CSI) is responsible for the development and maintenance of Risk, Finance and Compliance applications, used by end users worldwide. The Finance IT section of CSI is responsible for applications handling financial accounting worldwide.

Our applications are data and UI-centric. As a QA Automation SDET, you should be able to work on both aspects.

Main responsibilities

• Design, develop, test and maintain web and mobile solutions to meet the requirements.
• Research, analyse and evaluate requirements for existing or new web and mobile applications.
• Evaluate programming codes to ensure that they are properly structured, meet industry standards and are compatible with browsers and devices.
• Develop website infrastructure and integrate websites with other computer applications

As UI/Behavioral Automation Engineer (mandatory)

• Ability to build an automated test solution from scratch using Cypress, Cucumber, and Selenium
• Coordinate with application support (BA and developers) and other tester colleagues on creating the automation test suite
• Prepare good documentation of each automated test process

As CI/CD Engineer (mandatory)

• Understand the build and deployment process of the project
• Monitor the daily build, test, and deployment pipelines in GitLab
• Handle and build KPI’s for all the jobs

As Data Automation Engineer (optional)

• Build automated test solution for APIs using NUnit
• Propose strategy and solution for data testing
• Prepare tooling and script for automating data regression testing
• Perform and follow-up data regression testing phase as a fully integrated part of the project

As Integration Tester (optional)

• Under the supervision of team head, handle the different integration test phases (planning, test functional coverage and adequacy with functional content) and to manage regression test, integration test on functional test campaign
• Maintain up to date test libraries (test cases)
• Handle and build KPI on performance testing
• Prepare regular reports on test results

The position requires autonomy and reliability in performing duties while maintaining close communication with rest of project/support team.

Qualifications and Profile

• This position requires a minimum of 6 years on testing, including 5 years of relevant experience in automated testing, ideally in a user-facing application.
• Good understanding & working knowledge of Agile/Scrum.
• Bachelor Degree in Computer Science, IT, Programming & Systems Analysis or Computer Studies.

Technical

• Strong knowledge of JavaScript / TypeScript-based frameworks (such as Angular)
• Strong knowledge of C# / .NET frameworks
• Strong understanding of OOP concepts
• Should have experience in creating automation framework from scratch using Cypress, Selenium
• Should have experience in the development, enhancement, and maintenance of test automation framework with Cypress, Selenium
• Should have experience in writing test cases using Cucumber
• Good experience in API testing using NUnit
• Must have hands on experience on version control tools like Git
• Must have hands on experience integrating the testing framework in a CI/CD pipeline
• Experience in scripting
• Experience in end-to-end testing process
• Good command of SQL
• Some experience on Docker / Kubernetes is a plus
• Some experience in doing ETL (data) testing is a plus

Other Professional Skills and Mind-set

• Strong organisational and communication skills
• Strong analytical and problem solving skills
• Experience working within a LEAN environment
• Awareness of various software development procedures
• Capable to effectively interact with technical team
• Understanding and respect of cultural diversity

Interested applicants, please email your resume to Shaun Quek Yew Meng

Email: [email protected]

CEI Reg No: R1660732

EA Licence No: 99C4599

Responsibilities

• Responsible for evaluating and qualify products to fulfil customer expectations regarding reliability, usability, and operating life

Requirements

• Min Diploma in Engineering
• Min 2 years of working experience in failure analysis of metals and materials related products
• Experience with test or life cycle management tools an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description

• Conduct cyber risk assessment (red team engagement) in support of technology initiatives to emulate the APT adversary scenarios, and help identify IT related risk and determine appropriate controls to mitigate risks
• Monitor, track, and manage unknown risk mitigations and exceptions, and ensure adequate monitoring capability is incorporated into solutions
• Research the undiscovered vulnerabilities (0-day) against different IT infrastructures, including operating systems (Windows/Linux), cloud native (Kubernetes/Docker), network devices (routers/switches/firewalls/VPNs), and endpoint management (VMware Workspace ONE/IPMI)
• Deliver the exploit code and plugins for identified vulnerabilities

Requirements

• Bachelor’s degree or higher in Computer Science, Information Technology, Programming & Systems Analysis, Engineering, Statistics, or other related fields
• Minimum 3 years of relevant work experience
• Hands-on experience in writing standalone PoCs of infrastructure vulnerabilities, including writing exploit codes based on known PoCs of vulnerability descriptions
• Familiar with common vulnerability classes such as buffer overflows, command injection, insecure deserialization
• In-depth understanding of modern security mitigations and methods to bypass them (e.g. stack cookies, SafeSEH, DEP, ASLR, CFG, etc)
• In-depth understanding of security mechanisms of Windows/Linux systems, and familiar with offensive techniques in ring0/ring3
• Experience in vulnerability analysis, fuzzing, reverse engineering, or advanced exploitation techniques, with proficiency in tools such as IDA Pro, OllyDBG, WinDBG, GDB, Burp Suite, etc
• Proficient in programming languages like Python, Go, or Java
• Strong communication skills and effective teamwork spirit
• Self-starter and fast learning ability

KEY ACTIVITIES AND RESPONSIBILITIES

As a Senior Systems Integration Engineer, you are accountable for:

· Preparing definition documents to align with project targets relating to costs, deadlines and quality, and participating in the product integration and verification phases

· Supporting the planning and coordination of program software integration activities, and delivering software integration services for systems and/or sub-systems of products

· Defining and leading testing activities (regression, interface, simulation scenarios and test tools)

· Product installation, configuration, data management, performance monitoring and systems administration

· Leading the integration & block testing of incremental software releases for products and/or projects, in accordance with the schedule

· Providing expert technical support and the setup of environments to developers, testers and end users, and providing support to the software integration team, development and validation teams during the implementation phase of the project

· Identifying risks and proposing effective solutions

· Authoring documentation and documentation updates

RESPONSIBILITIES:

The Senior Engineer is a professional engineer performing duties requiring the application of mature professional engineering knowledge. With scope for individual accomplishment and coordination of more difficult assignments, the professional deals with problems for which it is necessary to modify established guides and devise new approaches.

The Senior Engineer may make some original contribution or apply new professional engineering approaches and techniques to the design or development of equipment or special aspects of products, facilities and buildings.

Recommendations may be reviewed for soundness of judgement but are usually regarded as technically accurate and feasible. The Senior Engineer makes responsible decisions on matters assigned, including the establishment of professional engineering standards and procedures, consults, recommends and advises in speciality engineering areas.

Work is carried out within broad guidelines requiring conformity with overall objectives, relative priorities and necessary cooperation with other units. Informed professional engineering guidance may be available.

The Senior Engineer outlines and assigns work, reviews it for technical accuracy and adequacy, and may plan, direct, coordinate and supervise the work of other professional and technical staff.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated the following knowledge and experience:

· A tertiary qualification in Engineering, Computer Science or IT

· Solid understanding of software integration and testing processes including regression, interface, simulation scenarios and test tools

· Solid experience in using UNIX/Linux operating systems, binary and source level debugging tools, Requirement/Test and Defect Management Systems

· Practical experience of integration and verification of software / hardware components on large, complex, software-based systems

· Practical experience with programming languages such as; Java, Shell Scripting, Python and continuous integration tools such as Git and Jenkins

· Strong communication skills, with the ability to write clear and concise documents that clearly articulate complex technical detail

The Aviation Innovation Research (AIR) Lab

The joint CAAS-Thales innovation lab known as ‘AIR Lab’ started to operate on 1st November 2019 with the objective to develop Proof of Concepts (POCs) or Minimum Viable Products (MVPs) of advanced and open technologies for future Air Traffic Management (ATM). Currently, the joint lab employs a team of 40 Thales engineers and 12 CAAS engineers and air traffic controllers operating in a vibrant ecosystem involving a number of Singaporean SMEs and start-ups, as well as key research institutes.

Thales engineers include 10 domain experts – with more than 10 years of experience – coming from Thales ATM centres of competence in France and Australia. These experts are coaching both the local Thales and CAAS engineers.

The POCs and MVPs are co-developed with the CAAS engineers who have access to the same development tools and environment used by the Thales Engineers (provided by the Singapore branch of Thales Digital Factory). The POCs and MVPs are defined in collaboration with CAAS air traffic controllers through iterative workshops.

AIR Lab research outcomes will feed the next generation of products, including clearly disruptive outcomes addressing Safety and Security for Open architecture, data driven ATM Twin, Green Aviation, Trajectory Based Operations.

As the AIR Lab was recently extended for another 3 years, 4 work streams are now embarked:

Regional Experimental Platform, FF-ICE/TBO, Green Aviation, Future-proof Interoperable Platform-Agnostic, Safe and Secure Platforms.

AIR Lab 2.0 continues to benefit from research conducted in Europe through new architecture research which, among other objectives, aims at meeting much stricter safety standards for ground ATM systems in development by the European Aviation Safety Authority (EASA). This breakthrough architecture study is co-funded by the French government (CASSIOPEA).

Regional Experimental Platform (REP) has been initiated in AIR Lab 1.0, and has the view to addressing regional needs in coordination with the SESAR 3 activities conducted in AMS France.

Whom We Are Looking For

As a Software Engineer in AIR Lab, you are seen by the members of your scrum team to be not only a pillar of strength but a source of motivation and inspiration as well. You should be someone who cares about the quality of the technical implementation and delivery as much as you care about the quality of your code. You should be someone who enjoys working in a team of diverse people with multiple ethnic and cultural backgrounds. You should be someone who enjoys diving into the technical details of figuring out a problem and also be able to communicate the solution back to the team so that the members can learn from it. You should be someone who loves learning new technologies and find innovative ways to apply newfound knowledge and be courageous to encourage fellow team members to be like YOU and enjoy participating in all aspects of engineering activities in the AIR Lab.

Responsibilities:

• Understand the functional aspects of the delivery and able to constructively discuss with the Product Owner
• Responsible for the availability or a regular product increment incorporating new features.
• Complete all fundamental tasks for the delivery of new functionality from Application Architecture, Design, Implementation to the tests phase (unit tests, functional tests, and performance tests).
• To implement features by defining test, develop feature and associated automated tests. If appropriate implement security tests and load tests.
• Write and review the necessary technical documentation.
• Decide and implement team level code quality standards.

· Work in an agile, cross-functional multinational team, actively engaging to support the success of the team.

Requirements:

Education

· Bachelors in Computer Science or Information Technology with a minimum of 2 years of working experience.

· Mid-career switchers are encouraged to apply if you demonstrate relevant working experience of a minimum 3 years.

Essential Skills/Experience

• Working knowledge of designing and building software applications using Java and/or Kotlin as a main programming language, between 2 to 3 years; a bonus is if you have experience designing and deploying RESTful APIs (i.e., proxy versus reverse proxy)
• Demonstrated application of Abstract Data Types, Algorithm Complexity Analysis
• Demonstrated application of Software Design Patterns using Java and/or Kotlin (e.g., Builder, Façade, Observer/Strategy)
• Demonstrated application of Advanced Software Design Patterns (e.g., Saga, Event Sourcing), Software Testing (e.g., Unit Testing, Integration Testing)
• Demonstrated application of working with Continuous Integration and/or Continuous Delivery models; you are expected to be familiar with using Linux (e.g., shell commands)
• Good communication skills in English

Desirable Skills/Experience

• Working knowledge of designing and building virtualized & containerized environments (e.g., Kaniko, Docker, Virtual Machine)
• Working knowledge of deploying containers to public clouds (e.g., Azure Cloud, AWS, GCP) and Kubernetes
• Working knowledge of designing and building software applications within Event-Driven Architectures, message broker technology Kafka
• Bonus if you demonstrate a working understanding of designing application with a “shift-left” cybersecurity approach.
• Bonus if you demonstrate knowledge of other languages (e.g., Python, Scala, Go, TypeScript, C, C++, Java)
• Bonus if you demonstrate knowledge of designing software applications that manipulates data (structured, unstructured format) working with Data Lake and/or Lakehouse implementations (e.g., Delta Lake, Databricks, Azure Data Lake)
• Bonus if you demonstrate working knowledge of designing large-scale ETL using frameworks like Apache Flink, Apache Spark and the like.
• Bonus if you demonstrate working knowledge of working with the Elastic Search stack.
• Bonus if you demonstrate previous experience with AI/ML framework.

Essential / Desirable Traits

· Possess learning agility, flexibility and pro-activity

· Comfortable with agile teamwork and customer engagement

YOUR CAREER AT THALES

Future opportunities will allow you to discover other domains or sites. You will be able to evolve and grow your competencies in different areas:

• Room and attention to personal development

• Build your talents in another domain of Thales Group, discovering new products, new customers, new country or go to a more complex Solution.

• Choose between a technical expertise or a leadership path

• Build an international career within a leading Engineering Group

KEY ROLES AND RESPONSIBILITIES:

The candidate will be responsible for designing and implementing instrumentation and data acquisition solutions and systems to be deployed on site, ensuring that the solutions are reliable and scalable. The candidate will also be responsible for developing and maintaining documentation for solutions, including design specifications and test plans. The successful candidate will be expected to have strong problem-solving skills and be able to troubleshoot and debug complex issues.

QUALIFICATIONS & EXPERIENCE

· Bachelor degree / Diploma in Engineering, Computer Science or any other related field

· Hands-on implementation experience in instrumentation and data acquisition

· Experience in the domain area / technology / programming languages and Communication/Data protocols

· Experience in code management and deployment

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Marine Innovation is at the forefront of maritime technology, specializing in advanced navigation and communication solutions for the shipping industry. We pride ourselves on innovation, quality, and our commitment to unparalleled service standards.

Job Description:

We are seeking a highly skilled and motivated Navigation and Communications Field Service Engineer to join our dynamic team. Based in Singapore or India, this role involves traveling to various shipyards and anchorages, providing expert installation, maintenance, and repair services for our state-of-the-art navigation and communication systems. The successful candidate will play a crucial role in ensuring the operational excellence of our maritime clients, delivering solutions that enhance safety and efficiency at sea.

Key Responsibilities:

- Travel to shipyards and anchorages to perform installation, maintenance, and troubleshooting of navigation and communication systems.

- Conduct on-site training for clients' crews, ensuring they are proficient in the use and maintenance of our systems.

- Provide technical support, advice, and solutions to clients, both remotely and on-site.

- Collaborate with the engineering team to improve product reliability and serviceability.

- Prepare and submit detailed service reports, documenting all work performed and recommendations for future service.

- Stay up-to-date with the latest industry standards, regulations, and technology advancements.

Qualifications:

- NITEC or Higher NITEC, Diploma in Electronics Engineering, Marine Engineering, or a related field.

- Proven experience as a Field Service Engineer, preferably in the maritime industry.

- Strong knowledge of maritime navigation and communication systems.

- Ability to diagnose and resolve complex technical issues effectively.

- Excellent communication and interpersonal skills, with the ability to provide training and support to clients.

- Willingness to travel extensively to various locations, including shipyards and anchorages.

- Ability to work independently in challenging environments.

- A General Operator Certificate (GOC) is a plus.

We Offer:

- Opportunities for professional growth and development within a leading company in the maritime industry.

- Dynamic and supportive work environment.

- Travel opportunities to various global locations.

- The chance to work with cutting-edge maritime technology and make a significant impact on the safety and efficiency of maritime operations.

Purpose: This position seeks to recruit an experienced research engineer to assist in developing new sustainable methodologies for chemical breakdown of waste plastics.

Job Responsibilities:

• The researcher will be involved in and contribute actively to waste plastics upcycling research, including but not limited to the following:
• Assist in synthesis and characterisation of homogeneous and heterogeneous catalysts and assist in reaction screening
• Be in charge of essential research equipment and maintennance
• Assist in training and mentoring staff, interns and students as and when required
• Curating and managing experimental data, and assist in preparation of reports, presentations, technological disclosures and manuscripts

Job Requirements:

• MSc in Chemistry or equivalent
• Familiar with chemical synthesis and routine/ essential characterization techniques
• Strong communication and interpersonal skills and ability to work cohesively in a team whilst sharing resources
• Strong interest to learn about new technologies
• Excellent organizational skills including attention to details
• Willingness to learn, with adaptability and flexibility to take on required/necessary tasks beyond the job description

Responsibilities:

Project Preparation, Evaluation and Execution

• Initiate and monitor the master project schedule up to FID
• Develop high-level project descriptions including layout drawings and process drawings(P&ID)
• Prepare specifications in line with Vopak standards and estimate costs for the proposed new, modifications or expansions project
• Take lead in preparation and completion of the ITB document including Basis of Design (BoD).
• Develop bid & piping packages for smaller project portions and work with Vopak Managers to develop bid packages for larger turnkey construction project portions.
• Take lead in technical clarification with the guidance of Vopak Managers to fully assess completeness of tender proposal and detailed comparison with every tenderer
• Provide the necessary inputs on technical evaluation to identify the most appropriate proposal for awarding of tender
• Review consultant and contractor drawings, specifications and documentation in liaison with Vopak Team.
• Assist commissioning team during the commissioning stage
• Liaise with the procurement team for purchasing of equipment / material according to the approved vendor lists and prepare Request For proposal (RFP) for obtaining quotes from bidders, Tendering & BQ evaluation
• Be responsible for project record-keeping. Perform overall quality control of the work (budget, schedule, plans, and personnel’s performance) and report regularly on project status
• Provide an on-site technical and engineering service between contractor and Vopak to maintain control of construction, including site safety supervision and Safe Work Permit coordination
• Supervise and review Contractor Quality Inspection and Test Programmes. Coordinate specialist Third Party Inspections
• Review technical problems arising during construction, ensuring significant matters are formally resolved between contractor and Vopak.
• Investigate variation orders and make recommendations
• Monitor site OHS and environmental performance.
• Report to Project Manager and liaises with other discipline lead engineers to ensure proper coordination and interface among different disciplines
• Ensure that pertaining engineering activities (process, civil, marine, mechanical, piping, electrical, instrumentation and control, painting and insulation) are carried out in accordance with project requirements

Project Governance

• Support, deputise the Project Manager, and be accountable for the success of the project
• Support the Project Manager to evaluate the risk level; to seek mandate from the executive board prior to signing off; to provide leadership for the VPM roles and internal customer to manage project stakeholders; to coordinate all applicable project work streams

Compliance

• Take lead in overall compliance to Vopak Project Management (VPM) requirements.
• Conduct What-If risk assessment on changes under MOC
• Conduct Peer / Design Review as part of VPM requirement
• Keep abreast with the requirements of local legislative requirements and Vopak Corporate, Codes, Standards, and regulations
• Review of Method Statement and JSA(New)

Post Implementation Review

• Conduct project review on project and technical accomplishments
• Close-out the project and participate in a post implementation review

Stakeholder Relationship & Management

• Plan and deliver stakeholder engagement activities to develop effective project working relationships and to ensure that stakeholder needs and concerns are identified and met
• Manage internal and external stakeholder to ensure project is completed timely and safely
• Liaise with tax, legal, insurance, and treasury corporate departments / advisors on matters like e.g., contracting plan, and project execution plan

People Management

• Coach and guide other Project Team Members

Requirements:

• At least 5 to 8 years Oil & Petrochemical experience. 5 years project management experience, in similar industry
• Certified - Project Management
• Certified - Construction safety course for Project Managers
• Degree in Engineering preferably Mechanical or Process.
• Preferable to have piping experience.
• Experience in Construction and Maintenance of Jetty and Jetty topside equipments)
• Conversant with International standards such as API, ASME, ANSI, OCIMF, NFPA, Singapore Standard, Code of Practice.
• Preferable to have worked in Oil/Chemical Terminal experience
• Project or work exposure in tank engineering, construction or maintenance.
• Project or work exposure in process design or rotating equipment / terminal equipment maintenance,
• Sound Project Management skills and track record
• Project proficiency with Engineering and Operational knowledge background and experience in managing tank farms and similar projects.
• Knowledge of technical functional areas for better coordination and timely decision making
• Ability to work well in cross cultural environment
• Trustworthy, Integrity and independence
• Planning and organization skills
• Financial management skills
• Good communication (verbal and written) and interpersonal skills
• Effective problem solving skills

JOB DESCRIPTION:

• Preparation of material requisition based on project specification/standard and regulation for rotating equipment(such as centrifugal pumps, positive displacement pumps, air and utility compressor, steam/gas turbines, etc.,)
• Technical evaluation of acceptability in line with our material requisition for Vendor’s quotations.
• Review Vendor drawings and documents for their completeness, accuracy and compliance.
• Preparation of BOM (Bill of Material) for construction engineering.
• Review other discipline’s drawing and document for interconnection design with piping, civil, electrical and instrument design, but also process design.
• Provides technical/engineering support and preparation for quality work at supplier shop and Construction/Commissioning work at site.
• Resolves technical issues using acquired knowledge that may arise during the execution of package engineering, fabrication and post-delivery.
• Organize the interface meeting among vendors and other discipline etc. for technical clarification.
• Assist Lead/Senior engineer to execute project.

JOB REQUIREMENT:

• Bachelor Degree in Engineering.
• Minimum 5 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable experience in off-shore application.
• Possess relevant experience working on EPC projects.
• Familiar with International Industry Codes such as ASME, API etc.

We are looking for a skilled System Engineer with a focus on hardware to design, implement, and maintain our systems infrastructure. As a System Engineer, you will play a key role in sourcing correct System on Module, System on Chip, or Single Board Computers to achieve desired design specfications. You will collaborate with cross-functional teams to analyze requirements, recommend hardware solutions, and contribute to the overall success of our projects.

Responsibilities:

1. Hardware Design and Implementation:Design, develop, and implement hardware solutions to meet system requirements.Conduct hardware evaluations and recommend appropriate technologies to enhance system performance.
   
2. System Integration:Integrate hardware components into the overall system architecture.
   Collaborate with software engineers to ensure seamless integration between hardware and software components.
   
3. Troubleshooting and Maintenance:Diagnose and resolve hardware-related issues promptly to minimize system downtime.Perform routine maintenance tasks to ensure the ongoing reliability of hardware systems.
   
4. Performance Optimization:Monitor system performance and recommend optimizations to enhance efficiency. Conduct performance testing and analysis to identify areas for improvement.
   
5. Documentation:Create and maintain comprehensive documentation for hardware configurations, processes, and procedures.Develop and update system engineering documentation as needed.
   
6. Collaboration:Work closely with cross-functional teams, including software engineers, network engineers, and project managers, to achieve project goals. Provide technical expertise and support to team members as required.
   

Qualifications:

• Bachelor's degree in Computer Science, Electrical Engineering, or a related field.
• Proven experience as a System Engineer with a focus on hardware.
• Strong knowledge of hardware components, architectures, and technologies.
• Proficiency in hardware design and integration.
• Experience with troubleshooting hardware issues and implementing solutions.
• Familiarity with performance monitoring and optimization tools.
• Excellent collaboration and communication skills.
• Detail-oriented with a strong problem-solving mindset.

If you are passionate about system engineering, possess excellent hardware skills, and are ready to contribute to innovative projects, we invite you to join our team. Apply now and be a part of our exciting journey towards success!

PRODUCT AREA

Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.

JOB DESCRIPTION

The Data Center team designs and operates some of the most sophisticated electrical engineering, mechanical engineering and HVAC systems in the world. Facilities Technicians at Google data centers operate, monitor and support physical facilities conditions. Some of these duties will include heating and cooling of air and water, power supply, generators, UPS systems, electrical distribution and control and monitoring systems. You regularly help inspect, maintain and repair various data center systems such as piping and non-critical electrical or mechanical system components). You provide daily assistance to senior technicians as you read blueprints/schematics, conduct tours of systems and assess their working order.

As an advocate for best practices, you develop creative approaches to reducing operational costs while improving overall data center efficiency. You ensure that environmental and safety standards are consistently met, identifying problems and making repairs quickly. In emergency situations or abnormal conditions, you manage data center performance issues and outages to minimize the recovery time from failures.

Qualifications

JOB RESPONSIBILITIES

• Operate, maintain, troubleshoot and repair electrical equipment in a data center environment. Provide Root Cause Analysis (RCA), recovery and prevention actions for service failure.
• Prepare and execute operation procedures, respond to work request/service failure and provide operational and technical expertise in required areas.
• Coordinate vendor support in repairs/replacement and support project implementation (e.g., site acceptance tests, factory acceptance tests, site inspection for defects, etc.).
• Develop an understanding of the infrastructure design and sequence of operation.
• Prepare and conduct training to the team. Ensure safety rules and regulations associated with operating infrastructure.

MINIMUM QUALIFICATIONS

• Associate's degree, trade school certification, in a relevant technical field, or equivalent practical experience.
• 2 years of experience with electrical, mechanical, and controls systems, including: Feeders, Transformers, Generators, Switchgears, Chillers, UPS systems, ATS/STS/PDU/PMM/Air handling and CRAC units.
• Experience with SCADA, power monitoring system, building monitoring system, PLC programming.

PREFERRED QUALIFICATIONS

• Experience in troubleshooting.
• Knowledge of industrial networking, with the ability to coordinate with others in order to determine problems and implement solutions.
• Ability to follow the site’s environmental health and safety policies.
• Ability to learn quickly and address issues as they arise during normal operations or during emergency conditions.
• Ability to work non-standard hours and differing rotations/shifts.
• Ability to work in varying outdoor temperature conditions, perform material handling (e.g., lifting/shifting), and work on platforms, ladders, and under raised floors.