1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

Job Title: Project Engineer (Material Planner) (ID5074)
Location: Paya Lebar
Working Hours: Mon to Thurs 8.30am - 6pm, Fri 8.30am – 5.30pm
Salary: Up to $3800

Job Description:
• Manage project upon tasked.
• Interpret specifications and prepare document for submission.
• Liaise with customers on technical clarifications, submission, approval, schedule, variation claims.
• Prepare training material and conduct switchboard training.
• Prepare material list for switchboards for ordering.

Requirement:
• Degree or Diploma in Electrical Engineering from recognized university.
• At least 2-year relevant experience will be added advantage.
• Possessed reasonable communication skills in English, verbally and written.
• Able to use computer using Microsoft windows software, autocad software.

• Operate precision CNC turning/milling machine
• Perform CAD/CAM programming
• Interpret Engineering Drawings and Feature of Control Symbols
• Simple setting up of work piece and tooling set up
• Check and maintain machinery daily to ensure functionality
• Able to handle 8" to 12" chuck CNC Turn/Mill Machine, Fanuc control

Requirement

• Proficient in Quality Consciousness with the ability to meet productivity goals
• Must have good interpersonal communication skills and a positive team attitude
• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre

Job Title: Application Engineer (ID3441)
Location: Toa Payoh
Working Hours: Mon-Fri 8:15am-5:45pm
Salary: $3500-$5000

Responsibilities
• In-charge of both in-house and on-site application customer evaluation support of wedge bonding, knowledge of ball bonding is an added advantage.
• Provide direct customer on-site application support to optimize bonding parameters using DOE techniques.
• Assist corporate in-house product development and improvement projects related to bonding tools.
• Generate engineering evaluation report.
• Handle laboratory equipment & analytical tools independently with minimum assistance

Requirements
• Ability to provide hands-on application support.
• Degree/Diploma in Electrical / Mechanical / Electronics Engineering or equivalent.
• At least 3 years of working experience in related field.

Summary:

At Energy Supplies & Engineering (S) Pte Ltd, we are leaders in delivering specialized HVAC solutions in Singapore, focusing on dehumidification systems, Dedicated Outdoor Air Systems (DOAS), and other custom-engineered products. Our clients span various industries, including data centers, manufacturing, and commercial facilities, and we are dedicated to providing reliable, high-quality solutions.

As we continue to grow, we are looking for a dedicated Sales & Application Engineer to join our team. In this role, you’ll be pivotal in connecting customers with technical solutions, supporting the sales team, and managing customer relationships to ensure our clients receive top-notch service and solutions.

Key Responsibilities:

Technical Sales Support - Assist the sales team by understanding customer needs, creating proposals, and presenting technical solutions.

Application Engineering - Recommend and design HVAC solutions based on client specifications, ensuring technical feasibility and cost-effectiveness.

Customer Engagement - Build strong relationships with both existing and potential clients, listening to their needs and maintaining high levels of customer satisfaction.

Project Coordination - Work with internal teams and suppliers to ensure projects are executed smoothly and solutions meet customer expectations.

Documentation & Reporting: Keep accurate records, including proposals, technical specifications, project timelines, and sales reports.

Market Insights: Stay informed on industry trends and competitor products to offer innovative solutions that keep us competitive.

Participate in post-project reviews to evaluate project performance, gather feedback, and identify opportunities for process improvement and innovation.

Conduct training sessions for internal teams, contractors, and clients on product application, installation best practices, and maintenance procedures to enhance project outcomes and client satisfaction.

Any other ad hoc tasks assigned by supervisor.

Qualifications:

Diploma in Mechanical or Electrical Engineering and above

Minimum of 1-2 years in sales or application engineering within the HVAC industry (fresh graduates with relevant internships are also welcome to apply)

Relevant certifications in HVAC, refrigeration, and electrical systems are a plus.

Able to work independently, proactive, and focused on meeting and exceeding sales targets.

Clear verbal and written communication skills, with the ability to explain technical details to customers.

Additional Requirements:

Ability to work flexible hours and respond to emergencies as needed.

Physical capability to perform inspections and repairs in various environments.

Ability to multitask and prioritize tasks effectively.

Attention to detail and problem-solving skills.​​​​​​​​​​​​​​

Benefits:

Competitive salary with performance-based bonuses

Opportunities for professional growth and training

Collaborative and supportive work culture

Health and wellness benefits

Working Conditions:

Immediate Full-time position, typically Monday to Friday, with standard office hours

How to Apply:

If you’re passion for HVAC and a customer-focused approach, we’d love to hear from you!

Please apply via [email protected] with your updated resume and a cover letter detailing your interest and relevant experience.

Job Title: Assistant Engineer (ID4633)
Location: : Woodlands
Working Hour： Mon - Fri 8.15am- 5.30pm
Salary: $2600

Job Description:
• Assist in the design, development, and testing of mechanical systems and equipment.
• Support senior engineers in planning and executing projects.
• Perform routine maintenance and troubleshooting of mechanical machinery.Conduct inspections and quality checks on mechanical components.
• Assist in preparing technical reports, documentation, and drawings.
• Collaborate with other departments to ensure project goals are met.
• Monitor and ensure compliance with safety and regulatory standards.
• Provide technical support during installation and commissioning of equipment.
• Assist in solving mechanical issues and suggesting improvements.

Requirement
• Candidate must possess Diploma in Mechanical or Engineering|
• No experience require

Job Title: QC Lab Assistant/Technician (ID6002)
Location: Tuas
Working Hours: Mon to Fri 8am to 5pm
Salary: up to S$3000

Job Description:
-To perform sensory evaluation, chemical and microbiological analysis on raw materials and products.
-To perform routine environmental hygiene tests
-Understand sampling plan and methods of sampling and carry out raw materials and products sampling according to sampling plan.
-Preparation of laboratory culture media and reagents.
-Preparation of samples upon request by customers and/or external lab testing purpose.
-To tabulate and record all testing results and data into the provided inspection form and master list.
-Maintain good housekeeping of the laboratory and equipment.
-Carry out routine inventory checks on laboratory consumables, media and reagents.
-To inform HOD on lab inventory status to purchase necessary items and equipment for analysis.
-Report to HOD if any non-conformance found on raw materials and products.
-To keep retained raw material and product samples according to production date for future reference in case any quality dispute from customers.
-To file analysis records, external lab test reports and other documents in a timely manner..
-To assist HOD on other related duties.
-For ‘Senior QC Lab Tech’, he/she will be the leader to assist and guide other lab technicians.

Requirements:
-Min. GCE "O" Level (chemistry and biology)
-Some knowledge and experience in laboratory work.

Able to perform Installation, Test/Commission, Preventive and Corrective Maintenance (PM & CM), repair and troubleshoot on healthcare equipment/system.

· Respond, monitor and resolve recurring problems to ensure ongoing customer satisfaction.

· Plan and schedule PM or CM.

· Provide post-sales support when require.

· Liaise and coordinate with manufacturers, vendors, contractors, customers for projects.

· Assist project team in project execution.

· Attend to service calls.

· Collaborate & gather feedback/prospect and share with team members

· Any ad-hoc duties or calls as assigned.

Requirements

· NITEC/Diploma in Electrical/Electronic Engineering or equivalent

· Experience with software assisted technical service diagnostic & testing equipment.

· Minimum 2-3 years’ experience in relevant field. Entry level candidates with willingness to learn are welcome.

Able to perform Installation, Test/Commission, Preventive and Corrective Maintenance (PM & CM), repair and troubleshoot on healthcare equipment/system.

· Respond, monitor and resolve recurring problems to ensure ongoing customer satisfaction.

· Plan and schedule PM or CM.

· Provide post-sales support when require.

· Liaise and coordinate with manufacturers, vendors, contractors, customers for projects.

· Assist project team in project execution.

· Attend to service calls.

· Collaborate & gather feedback/prospect and share with team members

· Any ad-hoc duties or calls as assigned.

Requirements

· NITEC/Diploma in Electrical/Electronic Engineering or equivalent

· Experience with software assisted technical service diagnostic & testing equipment.

· Minimum 2-3 years’ experience in relevant field. Entry level candidates with willingness to learn are welcome.

Job Title: Engineer (CMTD) – Concrete Testing

1. To attend to clients’ enquiries and technical issues
2. To prepare and follow up on quotations sent to clients
3. To open job and follow through the job i.e. testing, report writing, report endorsement and draft invoice preparation
4. To prepare worksheets for new tests and assist to review existing worksheets
5. To lead and assist colleagues/ subordinates to ensure smooth operation of Concrete Lab
6. To provide support in the development of new tests
7. To provide and participate in corporate activities such as safety, internal/external trainings, work improvement, etc.
8. To participate in SAC SINGLAS Accreditation Assessment and achieve approved signatory
9. To support other sections when required e.g. Thermal lab/ Cement Lab/ Cube lab
10. To handle any other assignments, eg. ad-hoc duties and posting, etc. as assigned by supervisor from time to time

Requirements

• Minimum Degree in Civil Engineering
• Keen to learn
• Possess positive attitude

Job Title: Digital Infrastructure Engineer (ID1593)
Location: Pioneer, transport pick up Singapore and JB Bukit Indah
Working Hours: Mon to Fri 8:30am – 17:30pm
Salary: $2800 - $3800
Benefit: 12 days Annual Leave, AWS and Variable Bonus

Job Description
• To review the current IT infrastructure and propose improvement plans.
• Plan and implement the work based on company policy and ensure on schedule.
• Support and maintain the MS Windows servers, SAN Storages and CISCO network infrastructure of the whole company.
• To maintain and improve backup of the systems.

Requirement:
• Bachelor’s degree in IT related field or Diploma with at least 4 years of related working experience
• Experience in manufacturing field will be an added advantage
• Good knowledge in configuration of networking and IP telephony system.
• Good hands-on knowledge of Microsoft Server system
• Strong analytical and troubleshooting skills
• Project management knowledge
• Candidate with MCSE, CCNA certification will be a plus
• Fresh graduates are welcomed to apply

Job Title: QC Technician (ID9074)
Location: Tuas, Company transport provided at Lakeside MRT, Jalan Boon Lay & Pioneer Mall & Pioneer MRT
Working Hours: Mon to Fri 8.00am-5.15pm
Salary: $2000
Gross Salary: $2500-$2800 (Including OT)

Benefits:
*AWS with 7 days AL starting
*Company transport provided at Lakeside MRT, Jalan Boon Lay & Pioneer Mall & Pioneer MRT

Job Description
• To be involved in QA/QC incoming and outgoing inspection
• To be responsible of QA/QC data collection and data entry
• To prepare product’s labelling
• To in charge in monthly stock count
• To assist QA engineer for misc adhoc job

Requirement:
• Minimum 1-2 Years in QA/QC experience
• Saturday occasionally have to come to work – consider OT

Job Title: Project Engineer (ID9072)
Location: Tuas
Working Hours: Mon to Fri 8.00am-5.15pm
Basic Salary: $3500
Gross Salary: $4000 - $5000

Job Description
-Involve in validation documentation for new machine/product/process/material
-Initiate product reviews. Verifies and test products. Responsible for validation, trial run for new projects and customers.
-Responsible for change control process and procedure development and implementation.
-Responsible for new job development.
-Provide technical support to customers.
-Provide QA support to project development
-Involved in new machine installation and process improvements.

Requirement:
• Min 1 year working experience in manufacturing environment
• Aircon Environment
• Company transport provided at Lakeside MRT, Jalan Boon Lay & Pioneer Mall & Pioneer MRT

Job Title: Procurement Engineer (ID5065)
Location: Tuas
Working Hours: Mon to Fri 8.30am – 5.15pm
Salary: $2400 to $4400

Job Description:
• Source and identify suppliers for direct/indirect materials/services to expand supplier base and for new project/production needs.
• Obtain quotes from new sources to provide costing information and cost reduction
• Lead in conducting periodic price negotiation with suppliers to ensure competency in cost for materials/services.
• Be part of team to conduct supplier qualification audit as well as parts qualification to ensure suppliers can meet company needs.
• Qualify suppliers once suppliers are selected in order to add suppliers into the Approved Vendor List.
• Conduct supplier performance review on a regular basis to manage supplier qualification and updates on supplier capabilities.
• Maintain standard operating procedures applicable to the Procurement department to ensure work flow process are consistence.
• Develop and negotiate favorable supply agreement with suppliers.
• Work with other department and suppliers to develop appropriate supply chain model to ensure assurance of supplies with minimal inventory holdings
• Work with other department like Engineering/Warehouse to ascertain quality standards of items supplied and established Quality plan
• Provide periodic quotation template to Sales department for standard products.
• Provide quotation to Sales department based on scope of supplies required by Customers.
• Any other task/project assigned by management

Requirement:
• Fresh graduate in Degree in Mechanical Engineering or Diploma in Mechanical Engineering with 2-3 years relevant experience
• Diploma holders at least 2 years exposure in components sourcing and fabrication parts.
• Proficient in Microsoft Word and Excel

1. Must be able to lead a group of Technicians and Take care of their safe working responsibilities.

2. Guide the subordinates to check and troubleshoot hydraulic systems onboard the vessels

3. Must have strong Knowledge of Hydraulic systems and able to read Hydraulic schematic drawings.

4. Hands-on experience with hydraulic motors, pumps, and their related systems.

5. Familiar with the steering gear systems, deck hydraulic Machinery, ballast and cargo remote control valve operating systems.

6. Able to handle the projects independently and must have knowledge about documentation, project costing, safety formalities etc.,

Job Description:

• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned from inception to completion within the specified timeframe and of the desired quality.
• Liaise with authorities, consultants and subcontractors.
• Implement architectural and structural works.
• Good communication skills to enhance good team working spirit.

Requirements:

• Experience in management of projects will be advantageous.
• Recognized degree in Civil/Structural Engineering by P.E. Board / BCA.
• Initiative, self-motivated, possess a strong drive with high responsibility and result oriented.
• Preferably 1 - 5 years working experience in Civil & Structural works.
• Experience in engineering software and AutoCad would be an advantage.
• Fresh graduates may apply.

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Instrumentation or a related field
• 6 + years of experience in instrumentation and control system design, analysis, and implementation
• Proficiency in using CAD software for control system design
• Experience with control system programming and software tools such as PLC programming, DCS programming, or SCADA systems
• Knowledge of codes, standards, and regulations related to instrumentation and control systems,
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to work independently and as part of a team
• Experience with industrial processes and equipment, such as pumps, motors, and valves

1. Able to Interpret technical drawings and requirements from machining parts.

2. Familiar with measuring instruments and gauges.

3. Excel and computer knowledge for drawings report processing.

4. Familiar with treatment and hardening processes.

5. Familiar of tolerance requirement and measurement of precision machined parts.

6. Training will be provided for non-experience personnel

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Job Description :

• Able to plan, implement and monitor work schedule at the site.
• Coordinate and liaise with the authorities, sub-con, suppliers & workers.

Job Requirements:

• AutoCAD, BIM revit, Microsoft Project etc.
• Degree in Civil, Architectural or Mechanical Engineering.
• 1-3 years relevant experiences are preferred.

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

Job Descriptions:

• Perform structural design and analysis, loading calculation and drawings for ETFE Skylight, Tensile Membrane, Structural Steel Structures.
• Able to perform Finite Element Analysis Modeling and Analysis of Structure.
• Preparation of 3D structural models and shop fabrication drawings, method statement etc.
• Work closely with architects, engineers, general contractors, fabricators and other professionals.
• Involve in supervising projects and provide progress report.
• Make sure projects meet authorities requirements.

Job Requirements:

• Minimum PhD or Masters degree in Civil and Structural Engineering or equivalent
• Minimum 2 years relevant experience in Civil and Structural Engineering design
• Proficiency with steel 3D modelling, analysis & design software such as Rhino and grasshopper.
• Proficiency with programming language especially C++ , Python and Fortran
• Able to produce detailed layout drawings
• Experience in Tensile Membrane, ETFE Skylight and Steelwork design is an advantage
• Good command of English