Position: L1 System Engineer

Budget: 2200-2500+shift allowance

RMS ID

Job Role/Level Associate Engineer, System Engineering

Quantity 01

Skillset Category Common

Mandatory Skills Model-Based System Engineering

Preferred Skills System Engineer Infra monitoring - Refer JD

(Excluding waiting time Education Verification & Work Pass Approval)

No. of AL that Candidate is Eligible if shortlisted 10 days (12hrs Shift Workers ONLY)/

Details of working hours 12 hours (2 days works and 2 days off, monthly 15 to 16 days work)

Basic knowledge of the job skills and company policies and procedures to complete a variety of assignments/tasks. Good understanding of the general/technical aspects of the job. Works on assignments that are routine to moderately complex in nature and require basic problem resolution and independent judgment. Allocates own time efficiently. Receives general instructions on all work.

Responsibilities:

 Proactively monitor all incidents in ITSM portal.

 Timely escalation of incidents to Level II support to meet SLA.

 Monitor system performance/alerts and escalate to Level II support.

 Review of automated reports and escalation of issues to POCs.

 Perform job monitoring and escalations.

 Respond to phone calls and user emails/requests/queries.

 Perform system alerts suppression.

 Able to perform adhoc task based on operational/project requirement.

 Able to work on 12hr shift pattern.

Basic knowledge of the job skills and company policies and procedures to complete a variety of assignments/tasks. Good understanding of the general/technical aspects of the job. Works on assignments that are routine to moderately complex in nature and require basic problem resolution and independent judgment. Allocates own time efficiently. Receives general instructions on all work.

Requirements:

 Diploma in Computer engineering or equivalent.

 Knowledgeable in IT Service Management.

 Good written and verbal communication skills.

 Good interpersonal skills.

 Ability to work independently and as part of a team.

 Able to multi-task.

Job Responsibilities

• Design and execute the standardization of workplace and infrastructure solution across the group, taking into consideration industry best practices and regulatory requirements.

• Implement and manage workplace technology solutions including end users devices, telephony, collaboration and office productivity tools, managed print. These will include the focus on Microsoft 365 suite, including emerging technologies like Microsoft Co-Pilot.

• Implement and manage network infrastructure such as WAN, Enterprise LAN, firewalls, routers, switches, load balancers, remote access and other network enabling technologies and applications.

• Implement and manage the Service Desk to handle service requests and incidents.

• Drive workplace technology and infrastructure service recovery to reduce system downtime and impact to internal users and external customer. • Track service providers SLAs.

• Experimentation and recommendation of new workplace technologies. Keep abreast with technology development in the industry and regulators.

Job Requirements

• Bachelor's degree in Computer Science, Information Technology, or a combination of relevant professional experience.

• More than 5 year’s relevant working experience in managing Workplace Technology and infrastructure. Financial services industry experience preferred but not mandatory.

• Experience in implementing and managing Microsoft infrastructure (i.e. Microsoft 365), including Active Directory, ADFS, Azure AD, SCCM, end point management tools.

• Familiar with WAN routing protocols, QOS, COS and experienced with Telco’s business and operations and network protocols like DHCP, TCP/IP, and VPN.

• Relevant certifications in Workplace Technology and Networking preferred but not mandatory.

• Strong technical, analytical and engineering competencies with hands-on experience in managing workplace and infrastructure environments.

• Customer and service centric and able to communicate concisely and clearly with non-IT-savvy users.

• Knowledge of ITIL framework and IT service management concepts and Agile methodologies

We are the makers of possible

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.

Why Join Us?

A career at BD means learning and working alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture. You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time.

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place.

Become a maker of possible with us!

Job Summary

Site BD Excellence Engineer will be passionate about creating a culture of operational and customer excellence, implementing change, and driving Continuous Improvement (CI) within the site or specific manufacturing unit/s.

Job Responsibilities

• Active member of Focused Improvement component team.
• Develop and grow problem solving capability at all levels.
• Support implementation of CI projects across all dimensions SQDC.
• Help coordinate activity of component teams and focused improvement project teams to eliminate loss, according to strategic goals.
• Help generate, sustain, and deliver a multi-year Cost to Win (CTW) portfolio, support governance processes, and optimization of the site loss landscape. Help meet or exceed CTW (Cost to Win) goals through leading and /or supporting Focused Improvement team savings projects (Loss Landscape).
• Teach and coach BD Excellence concepts and systematic approach, including strategy deployment, core components, Zero Loss mindset and all related methodologies / tools.
• Lead and facilitate breakthrough Kaizen events and support other BD Excellence components in problem solving capability development.
• Support development of zero loss mindset across critical areas to optimize quality, delivery and cost while improving safety.
• Help develop and grow capability through components and component teams to establish the fundamentals of excellence in safety, quality, and reliability.
• Coach and guide project selection process to ensure focus of resources and time on priorities.
• Ensure strategic alignment through cascading Key Performance Indicators (KPIs’) top down and bottom up. Support BD Excellence deployment and governance process across all relevant components.
• Drive BD Excellence capability development through deployment of progressively advanced aspects of component methodologies. Support attainment of long-term CI objectives through cross functional teams with shared goal.
• Drive use of effective data-driven visual-management techniques, e.g., Business-Operating-System (BOS) charts to drive improvement of KPIs such as OEE, waste, labour productivity, etc. Active role in governance and action tracking of improvements, with periodic reporting of activity completion dates, expected and achieved results.

Preferred Requirements

• Bachelor’s Degree in Engineering trade preferred.
• Minimum 3 years manufacturing experience in a plant.
• Previous experience in implementing, and strong knowledge of, Lean and Six Sigma business systems. Six sigma green or black belt certification preferred.
• Experience in Total Productive Maintenance or Industrial Engineering is an added advantage
• Demonstrated passion for safety, customer centricity and operational excellence.
• Understanding of the interaction between operational excellence and customer service.
• Excellent and effective verbal and written communication skills with people at all levels.
• Track record in project or program management.
• Experience of working in a multi-site and multi-cultural environment.
• Business acumen and ability to display the linkage between projects and desired business results.
• Able to develop compelling business case for resource investment, aligned with CTW finance policies and guidelines.

Click on apply if this sounds like you!

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

To learn more about BD visit: https://bd.com/careers

Primary Work Location

SGP Tuas - Tuas Plant

Job Responsibilities:

• Responsible for the development and maintenance of backend order clearing services for company.
• Responsible for technical solution design and implementation of product business.
• Responsible for the design and performance optimization of high flow and high concurrency systems.

Job requirement:

• Java development experience, bachelor degree or above in computer, communication or related majors are preferred.
• Solid programming skills, deep pursuit of technology, and able to solve issues during work.
• Proficient in multi-threaded programming, familiar with JVM, familiar with common open source frameworks and middleware such as spring-boot, etcd, redis, jraft.
• Deep understand of Kafka, MySQL and good at optimizing performance.
• Understand common architectural design methods, including micro-services, asynchrony programming, high availability, scalability, maintainability, etc.
• Proactive, strong problem solving skills, those who like reading technology books are preferred.
• Experience in finance trading or finance data analysis systems is preferred.

Keyrus is an international consulting firm, specializing in the integration of data intelligence and Digital solutions. With over 3,500 employees spread across 25 countries, Keyrus continues to deliver on such projects to a wide range of clients from various industries including but not limited to Banking/Finance, Healthcare/pharmaceuticals, FMCG, Oil & Gas, and more.

As part of Keyrus’ solution delivery, we are also in a position to recruit and place technical consultants to complement on existing client projects with their expertise. As such, we seek innovative and agile people to support ambitious and forthcoming technological challenges.

We are seeking a strong Storage Administrator/System Engineer in Hong Kong to join and support our client's team . This person will be working as member of APAC IT storage to manage storage related projects and provide level 3 operational support in APAC.

Key Responsibilities

Technical Management

• Support projects in APAC regions that are managed by APAC storage team
• Maintain configuration standards and design guidelines for storage systems, management systems and required software.
• Provide technical assistance to deployment teams.
• Maintain, adhere, and improve the standard operating procedures followed in the bank.
• Perform storage resource allocations and migrations when required complying the process.

Business relationships

• Communicate with APS, business, and other ITP teams during different project stages.

Governance

• Support storage vulnerability, baseline checking and storage hardening
• Produce health-check/dashboard/security compliance report as required

Essential Technical Knowledge/Skills:

• Minimum 5 years of system support experience on enterprise storage platform.
• Expertise in EMC PMAX/VMAX, ECS, Pure Storage, NetApp, Brocade SAN switches, and CleverSafe.
• Strong knowledge of storage management, including volume/file system management, data migration, snapshots, and replication.
• Experience in storage upgrades and hands-on with code upgrades.
• Project management experience will be a plus

Specific Qualifications preferred

• SAN management at intermediate to advanced level
• NAS management at intermediate to advanced level
• Object storage management at intermediate to advanced level
• ITIL foundation for service management

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.


Responsibilities:

• Offer technical support to field service engineers and customers as needed.
• Assess and define performance specifications for vision systems.
• Oversee customer-specific projects and associated documentation.
• Provide technical documentation and training as necessary.
• Contribute to product improvement initiatives.

Requirements:

• 1-3 years’ experience in Engineering discipline
• Vision/Optical Inspection system knowledge; semiconductor manufacturing experience

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

As Presales Engineer / Manager (CCTV), you be responsible for providing technical expertise and supporting the VIGI CCTV product sales and solutions. You will require to collaborate with sales teams to understand customer requirements, developing tailored solutions, and delivering compelling presentations.

Job Descriptions:

• Collaborate with the sales team to understand customer requirements and provide technical expertise, guidance, and support during the presales process for CCTV solutions
• Develop customized CCTV system designs, detailed technical proposals, including system specifications, pricing, and implementation plans
• Conduct product demonstrations and presentations to customers, showcasing the features and capabilities of VIGI CCTV solutions
• Collaborate with the sales team to understand customer requirements and propose tailored CCTV solutions
• Engage with customers during the presales process to address technical questions, concerns and offer technical advice and guidance to customers, ensuring their CCTV solution needs are met and solved
• Stay up to date with the latest CCTV technology trends and industry development, competitive products and emerging technologies to enhance solution offerings
• Provide training and support to the sales team on the technical aspects of CCTV products and solutions, as well as post-sales activities such as troubleshooting and after-sales support
• Work closely with other departments, including product development and marketing, to ensure alignment on product features and messaging

Job Requirements:

• Min. 2 years of experience in presales engineering or technical sales, preferably within the CCTV or security technology industry
• Strong understanding of CCTV systems, technologies and market trends
• Excellent technical knowledge and proven ability to develop technical solutions and proposals, along with strong problem-solving skills to provide comprehensive solutions to align with customer requirements
• Proficiency in design software and tools related to CCTV system planning
• Familiarity with industry standards, regulations, and best practices related to CCTV systems
• Excellent communication, presentation, and interpersonal skills
• Ability to communicate Mandarin effectively as the incumbent requires to liaise with Chinese-speaking stakeholders/counterparts for work or project related matters

Duties & Responsibilities

Lead Engineer role independently for Mechanical scope such as:

• Perform all engineering design assignment (Core: Pumps, Compressors, Blowers, Turbines, Machinery, Package Equipment. Option: Vessels, HVAC )
• Checker role for department rotating/package deliverables.
• Prepare specifications, data sheet, and inquiry documents.
• Perform all discipline engineering assignment and design work.
• Perform technical bid evaluation.
• Mechanical Handling and Movement Study.
• Coordinate with disciplines for layout.
• Review of vendor documentation and vendor management.
• Provide technical requirements and assessment for inspection and QC related matters.
• Participate in site surveys, HAZOPs, and various workshops.
• Participate in FATs, shop inspections and provide technical support during construction, pre-commissioning stage.
• Handle interface matters and coordinate with relevant parties.
• He/she must be ready to work at construction site and be ready for working overseas upon request.
• Other work related requests from Department Manager/ Supervisor.

Competencies / Preferred Skills:

• Familiar with and have experience with pumps, compressors blowers, turbines and other industrial package.
• Possess ability to interpret client requirement, identify deviations and co-ordinate for resolutions. In addition, he/she demonstrates the ability to verify own product for error free output and draft technical resolutions for issues, communicate interface matters timely to various discipline.
• Experience to lead an amalgamated team of engineers working in different locations.
• Competent in English language and proficient in MS Office programs.
• Competent in planning and coordination with relevant parties both internal and external.

Job Description:

• Assist in supervising and managing construction activities on-site to ensure smooth execution of project works.
• Plan, document, and coordinate all phases of the project, including scheduling, resource allocation, and progress tracking.
• Oversee site operations, including manpower deployment, material planning, and procurement, ensuring timelines and budgets are met.
• Act as the main point of contact for contractors and suppliers, resolving implementation issues, and representing the company at site meetings when required.
• Prepare and review key project documents such as method statements, risk assessments, and other compliance materials.
• Generate detailed weekly progress reports and handle necessary project submissions to relevant stakeholders.
• Conduct regular site inspections to monitor work quality and ensure compliance with authority regulations and safety standards.
• Collaborate with teams to ensure timely delivery of project milestones while maintaining high-quality standards.

Job Requirements:

• Min Diploma or degree in Civil Engineering or a related field.
• At least 2 years of on-site experience, preferably in construction or infrastructure projects.
• Strong organizational and project management skills, with the ability to multitask effectively.
• Excellent communication and teamwork abilities, ensuring seamless coordination among project stakeholders.
• Proficiency in AutoCAD and related engineering software tools.
• A proactive approach to problem-solving and a strong commitment to delivering high-quality work.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Production Engineer

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $6000

Position Summary:
The Production Engineer is responsible for improving the production technology of the EVAL site which will be launched in second half of 2026. The Production Engineer supports the production team for identifying, investigating, and resolving production issues in technical aspects. The Production Engineer leads technology for process control (DCS, SIS), operation condition, and product quality improvement and joins project work related to production technology development and improvement. Until the startup of EVAL production line, training and learning opportunities of EVAL production technology is provided by experienced members in Company. The Production Engineer will be a member of the commissioning and startup team of new EVAL plant and is responsible for designing and optimizing the process condition and process control system (DCS) and supports other production team members to achieve safe and stable commissioning and startup of new EVAL plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

• Support and deploy networks infrastructure
• Configure and install software, servers, routers and other network devices
• Load Balancers and Firewalls
• Monitor network performance and integrity
• Resolve issues tiers of support have escalated by troubleshooting cloud and local infrastructure
• Automate tasks and monitor their effectiveness
• Maintain complete technical documentation
• Suggest improvements to network performance, capacity and scalability

• Plan, execute, monitor and control the various technical aspect of the project.
• Manage or participate in new setup or upgrade of system/network infrastructure projects.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities
• Provide project documentation and reports
• Diagnose and rectify technical issue
• Managing and Operating Red Hat Linux, Windows VM Infrastructure
• Installation/Configuration/Hardening/Maintenance/Patching
• Maintain System Security
• Advanced Troubleshooting
• Performance Tuning
• Capacity Management
• Preventive/Proactive Support
• Incident/Change/Problem Management
• Provide system administration support and guidance for development team’s app configuration tasks
• Veritas Clustering Setup on RHEL VM would be added advantage
• Chef Automation would be added advantage
• AWS EC2 maintenance
• Managing and Operating VMware vSphere IT infrastructure

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Configure semiconductor devices, troubleshoot issues, and document engineering advancements.
• Create procedures for machinery assembly, assessment, and testing.
• Work with engineering and software teams to enhance system architecture.
• Partner with multidisciplinary engineers to address system challenges.

Requirements

Experience in setting up automated systems.

Proficient in electro mechatronic systems.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Key Responsibilities

• Assist with the installation and support of data center physical infrastructure.
• Install, replace, and troubleshoot cables and hardware components.
• Handle data-bearing devices, including hard drives and SSDs.
• Operate within a ticket-based environment for task management.
• Use pallet jacks or other lifting tools to move equipment safely.
• Support the Data Center Inventory and Asset Management Team in managing inventory and shipping tasks during peak times.
• Flexibility to work during weekends or holidays when required.

Qualifications and Skills

• Diploma or Degree in IT, Computer Engineering, or a related field.
• At least one year of experience in IT Support or Monitoring (fresh graduates with a proactive mindset are encouraged to apply).
• Six months or more in handling technical equipment or machinery.
• Familiarity with computer hardware and components.
• Preferred certifications include CompTIA (A+, Server+, Network+) and Basic Structure Cabling (BSC).
• Physically capable of standing, walking, and lifting frequently, with or without equipment assistance.
• Strong communication skills in English, both written and spoken.
• Enthusiasm for learning and expanding technical skills.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Deploy, administer, and support database and data lake infrastructures.
• Formulate and execute plans for high availability, backup, recovery, and disaster preparedness.
• Diagnose and resolve database issues and optimize performance.
• Enforce industry-standard security measures, policies, and best practices.
• Enhance clients' data warehouses and data lakes, and maintain comprehensive documentation.

Requirements

• Proficiency in Database Administration.
• Experience with Linux operating systems and scripting.
• Practical experience with at least one of the following: Hadoop Distributions, Relational Databases, or NoSQL Databases.
• Advantageous knowledge in one or more of the following areas: Data Virtualization tools, Scripting languages, Cloud platforms, and Docker/Kubernetes environments.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

About this Role

Wells Fargo is seeking a Senior Cloud and Trading Infrastructure Engineer. The role is a team lead position and will be responsible for cloud operations and providing trading floor support.

In this role, you will:

• Supporting cloud operations and migrations, including monitoring system performance and troubleshoot issues, implement automated monitoring and alerting systems, manage and optimize cloud environments for high availability and disaster recovery, and also assess existing infrastructure and identify suitable cloud services
• Provides trading floor support to Traders, Portfolio Managers and Analysts
• Provides feedback on potential issues or concerns to mitigate risks in the future required skills
• Structure and functionality of it networks and the components (basic) and Layer 1.
• Analyzes and uses vendor specifications and other diagnostic tools to troubleshoot complex systems software and/or hardware problems, resolves issues or escalates as needed to meet established service level agreements.
• Leads efforts to maintain, restore or improve service and determines when vendor maintenance support is needed.
• Participates in projects and/or coordinates small projects associated with implementation of upgrades, installations, modifications, customizations and/or testing, completes moderately complex programming and testing tasks.
• Updates and completes documentation, procedures and user guides.
• Understands BCP, quality, security and compliance requirements for supported area and analyzes additions and changes for risk to the environment.
• Participates in testing and updating the business continuation plan.
• Provides End to end technology support and related project support.
• Provides desktop support services for both software and hardware for the organization.
• Identifies and develops methods, techniques, diagnostic tools or criteria to troubleshoot, diagnose and resolve moderately complex desktop and desktop related hardware, software, operating systems, application and network problems
• Analyzes client needs and assesses technical alternatives to determine their impact on the client and systems environment.
• Coordinates the planning, installation and implementation of new or modified PC/LAN related hardware, software, applications or operating systems to meet client s requirements and updates/writes documentation.
• Participates in the implementation of voice and data communication networks to support environment, including configuring, implementing and troubleshooting circuits.
• Coordinates testing and updating the business continuation plan.
• Participate and collaborate as an I.T Infrastructure resource for all Technology Initiatives in APAC region
• Provide guidance and training to customers on current technology and it policies
• Promote self-help through the use of knowledge base and technology specific portals

Required Qualifications:

• 4+ years of Systems Engineering, Technology Architecture experience, or equivalent demonstrated through one or a combination of the following: work experience, training, military experience, education
• Working knowledge with Azure and GCP cloud operations and migrations, and serverless computing (Azure Functions, Google Cloud Functions)

Desired Qualifications:

• Experience in providing technical support for all trading operating systems and adapt to the dynamic & fast paced trading floor.
• Experience with the administration of voice recording applications, turrets, Trader desktops, laptops which are used in the trading floors in the banking/financial services’ industry.
• Experience with an established Incident & Problem Management process & tools.
• Demonstrate you have conducted audit activities for supported production environments.
• Technical skills: Microsoft office products, Microsoft operating system (currently windows 10), hardware and provisioning for Trader Desktops/Laptops, Phone systems , turrets and Mobiles ( Android and IOS )
• Microsoft active directory functioning
• ITIL framework or process knowhow
• Good Information security knowledge and usage of ticketing tools
• Installation/troubleshooting knowledge of trading, Platforms (Bloomberg, Reuters) (basic trading apps)
• Strong communication (verbal/written) skills to professionally frame & articulate questions & answers with business stakeholders, technology staff & vendors.

We Value Diversity

At Wells Fargo, we believe in diversity, equity and inclusion in the workplace; accordingly, we welcome applications for employment from all qualified candidates, regardless of race, color, gender, national origin, religion, age, sexual orientation, gender identity, gender expression, genetic information, individuals with disabilities, pregnancy, marital status, status as a protected veteran or any other status protected by applicable law.

Employees support our focus on building strong customer relationships balanced with a strong risk mitigating and compliance-driven culture which firmly establishes those disciplines as critical to the success of our customers and company. They are accountable for execution of all applicable risk programs (Credit, Market, Financial Crimes, Operational, Regulatory Compliance), which includes effectively following and adhering to applicable Wells Fargo policies and procedures, appropriately fulfilling risk and compliance obligations, timely and effective escalation and remediation of issues, and making sound risk decisions. There is emphasis on proactive monitoring, governance, risk identification and escalation, as well as making sound risk decisions commensurate with the business unit’s risk appetite and all risk and compliance program requirements.

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Deliver project milestones, install hardware/software, and troubleshoot issues during implementation.
• Draft and execute Statements of Work (SOW), coordinating issue resolution with external parties.
• Participate in System Acceptance Tests, collaborating with vendors and customers.
• Create and update technical documentation, emphasizing clear network topologies.
• Produce SOW, system handover documents, and maintain inventory records.

Requirements

• Proficient in Linux operating systems.
• Well-versed in Networking, Firewall, and Fiber-Optic transmission devices.
• Acquainted with Big Data technologies; preferred background in implementation and system maintenance.
• Advantageous experience in Virtualization.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Create and deploy software solutions for high-speed automation systems.
• Architect, program, test, troubleshoot, and verify software applications.
• Assess and define system performance metrics and requirements.
• Software support to field service teams, update and optimize software for equipment.

Requirements

• Expertise in C/C++ programming and multi-threaded Windows development with Visual C++.
• Strong knowledge of electronic components, motion control, and interfacing with inspection systems.
• Proficient in mathematical principles and algorithm development.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Prepare, qualify, and ship machines from the factory to global customers, with occasional on-site service support.

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Set and advance sustainability targets, balancing financial and environmental goals.
• Implement effective reporting systems; collaborate on performance benchmarks.
• Lead sustainability communications; create educational materials.
• Formalize sustainability practices through documentation and reviews.
• Monitor and report on sustainability metrics; conduct audits.

Requirements

• Experience in a related field preferred.
• Knowledged of BCA Green Mark for Data Centre and Buildings, ISO 14001 Environment Management System, SS564 Green Data Centre etc

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

About ByteDance

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

Creation is the core of ByteDance's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible.

Together, we inspire creativity and enrich life - a mission we aim towards achieving every day.

To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage?

Always.

At ByteDance, we create together and grow together. That's how we drive impact - for ourselves, our company, and the users we serve. Join us.

Video Infrastructure is one of the world's leading video platforms that provides media storage, delivery, transcoding, and streaming services. We are building the next generation video processing platform and the largest live streaming network, which provides excellent experiences for billions of users around the world. Popular video products of TikTok and its affiliates are all empowered by our cutting-edge cloud technologies. Working in this team, you will have the opportunity to tackle challenges of large-scale networks all over the world, while leveraging your expertise in coding, algorithms, complexity analysis, and large-scale system design.

Responsibilities

1. Track, analyse and conduct troubleshooting via online and offline channels. Come up with optimization strategies and tactics.

2. Actively participate in planning and building our Quality System (QS).

3. Communicate with users to identify needs and expectations. Collaborate with product management, R&D and service teams to meet customer requirements.

4. Ensure standardization of service quality by providing supporting data.

5. Take holistic approach to optimize established technical support mechanism as well as our QS.

Qualifications

Minimum Qualifications:

1. Bachelor’s degree in Computer Science or equivalent.

2. Able to work in fast-pace environment and embrace constant changes and challenges.

3. Good knowledge of networking fundamentals and protocols (eg. TCP/IP, HTTP/HTTPS, etc.).

Preferred Qualifications:

1. Strong experience in troubleshooting with critical problem-solving skills.

2. Demonstrates strong interpersonal skills and communicate with all levels within the organization.

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568